|
|
|
coreboot-4.9 Wed Dec 19 18:05:51 UTC 2018 romstage starting...
|
|
Intel ME early init
|
|
Intel ME firmware is ready
|
|
CBFS: 'Master Header Locator' located CBFS at [720000:800000)
|
|
CBFS: Locating 'fallback/postcar'
|
|
CBFS: Found @ offset 381c0 size 3804
|
|
Decompressing stage fallback/postcar @ 0xbf7cffc0 (31024 bytes)
|
|
|
|
|
|
coreboot-4.9 Wed Dec 19 18:05:51 UTC 2018 postcar starting...
|
|
CBFS: 'Master Header Locator' located CBFS at [720000:800000)
|
|
CBFS: Locating 'fallback/ramstage'
|
|
CBFS: Found @ offset 12d80 size 140d7
|
|
Decompressing stage fallback/ramstage @ 0xbf78cfc0 (233592 bytes)
|
|
|
|
|
|
coreboot-4.9 Wed Dec 19 18:05:51 UTC 2018 ramstage starting...
|
|
Enumerating buses...
|
|
PCI: Static device PCI: 00:16.2 not found, disabling it.
|
|
Enabling Common Clock Configuration
|
|
ASPM: Enabled L1
|
|
Failed to enable LTR for dev = PCI: 05:00.0
|
|
PMH7: ID 04 Revision 01
|
|
EC Firmware ID 6QHT34WW-3.18, Version 5.01B
|
|
H8: BDC not installed
|
|
H8: WWAN detection not implemented. Assuming WWAN installed
|
|
done
|
|
Manufacturer: c2
|
|
SF: Detected MX25L6405D with sector size 0x1000, total 0x800000
|
|
Allocating resources...
|
|
Reading resources...
|
|
PNP: 00ff.1 missing read_resources
|
|
PNP: 00ff.2 missing read_resources
|
|
Done reading resources.
|
|
skipping PNP: 164e.3@29 fixed resource, size=0!
|
|
skipping PNP: 164e.3@f0 fixed resource, size=0!
|
|
skipping PNP: 00ff.2@60 fixed resource, size=0!
|
|
skipping PNP: 00ff.2@62 fixed resource, size=0!
|
|
skipping PNP: 00ff.2@64 fixed resource, size=0!
|
|
skipping PNP: 00ff.2@66 fixed resource, size=0!
|
|
Setting resources...
|
|
PNP: 00ff.1 missing set_resources
|
|
PNP: 00ff.2 missing set_resources
|
|
Done setting resources.
|
|
Done allocating resources.
|
|
Enabling resources...
|
|
done.
|
|
Found TPM ST33ZP24 by ST Microelectronics
|
|
TPM: setup succeeded
|
|
Initializing devices...
|
|
Initializing CPU #0
|
|
Enabling cache
|
|
CBFS: 'Master Header Locator' located CBFS at [720000:800000)
|
|
CBFS: Locating 'cpu_microcode_blob.bin'
|
|
CBFS: Found @ offset 10100 size 2c00
|
|
CPU: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz.
|
|
CPU:lapic=0, boot_cpu=1
|
|
Setting up local APIC...done.
|
|
Turbo is available and visible
|
|
Initializing CPU #1
|
|
Enabling cache
|
|
CBFS: 'Master Header Locator' located CBFS at [720000:800000)
|
|
CBFS: Locating 'cpu_microcode_blob.bin'
|
|
CBFS: Found @ offset 10100 size 2c00
|
|
CPU: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz.
|
|
CPU:lapic=1, boot_cpu=0
|
|
Setting up local APIC...done.
|
|
CPU #1 initialized
|
|
Initializing CPU #2
|
|
Enabling cache
|
|
CBFS: 'Master Header Locator' located CBFS at [720000:800000)
|
|
Initializing CPU #3
|
|
CBFS: Locating 'cpu_microcode_blob.bin'
|
|
CPU #0 initialized
|
|
Waiting for 2 CPUS to stop
|
|
Enabling cache
|
|
CBFS: 'Master Header Locator' located CBFS at [720000:800000)
|
|
CBFS: Found @ offset 10100 size 2c00
|
|
CBFS: Locating 'cpu_microcode_blob.bin'
|
|
CPU: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz.
|
|
CBFS: Found @ offset 10100 size 2c00
|
|
CPU:lapic=4, boot_cpu=0
|
|
CPU: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz.
|
|
Setting up local APIC...CPU:lapic=5, boot_cpu=0
|
|
done.
|
|
CPU #2 initialized
|
|
Waiting for 1 CPUS to stop
|
|
Setting up local APIC...done.
|
|
CPU #3 initialized
|
|
GT init timeout
|
|
GT init timeout
|
|
ME: BIOS path: Normal
|
|
ME: Extend Register not valid
|
|
Set power off after power failure.
|
|
NMI sources disabled.
|
|
Keyboard controller output buffer result timeout
|
|
Keyboard controller output buffer result timeout
|
|
Keyboard controller output buffer result timeout
|
|
Keyboard controller output buffer result timeout
|
|
Keyboard controller output buffer result timeout
|
|
Keyboard reset failed ACK: 0xaa
|
|
Devices initialized
|
|
Finalize devices...
|
|
Devices finalized
|
|
CBFS: 'Master Header Locator' located CBFS at [720000:800000)
|
|
CBFS: Locating 'fallback/dsdt.aml'
|
|
CBFS: Found @ offset 3ba00 size 381b
|
|
CBFS: 'Master Header Locator' located CBFS at [720000:800000)
|
|
CBFS: Locating 'fallback/slic'
|
|
CBFS: 'fallback/slic' not found.
|
|
ACPI: Writing ACPI tables at bf716000.
|
|
Super I/O probe failed, skipping wacom
|
|
\_SB.PCI0.LPCB.TPM: LPC TPM PNP: 0c31.0
|
|
ACPI: * H8
|
|
H8: BDC not installed
|
|
H8: WWAN detection not implemented. Assuming WWAN installed
|
|
CBFS: 'Master Header Locator' located CBFS at [720000:800000)
|
|
CBFS: Locating 'vbt.bin'
|
|
CBFS: Found @ offset 27440 size 632
|
|
Found a VBT of 4309 bytes after decompression
|
|
GMA: Found VBT in CBFS
|
|
GMA: Found valid VBT in CBFS
|
|
ACPI: done.
|
|
CBFS: 'Master Header Locator' located CBFS at [720000:800000)
|
|
CBFS: 'Master Header Locator' located CBFS at [720000:800000)
|
|
CBFS: Locating 'fallback/payload'
|
|
CBFS: Found @ offset 3f280 size 109ca
|
|
SeaBIOS (version rel-1.12.0-0-ga698c89)
|
|
BUILD: gcc: (coreboot toolchain v1.50 October 15th, 2017) 6.3.0 binutils: (GNU Binutils) 2.29.1
|
|
Found coreboot cbmem console @ bf7de000
|
|
Found mainboard LENOVO ThinkPad X201
|
|
Relocating init from 0x000e1c80 to 0xbf6b71a0 (size 52672)
|
|
Found CBFS header at 0xfff20038
|
|
multiboot: eax=bf7b5860, ebx=bf7b5814
|
|
Found 18 PCI devices (max PCI bus is 06)
|
|
Copying SMBIOS entry point from 0xbf704000 to 0x000f6620
|
|
Copying ACPI RSDP from 0xbf716000 to 0x000f65f0
|
|
Using pmtimer, ioport 0x508
|
|
Scan for VGA option rom
|
|
Running option rom at c000:0003
|
|
Turning on vga text mode console
|
|
SeaBIOS (version rel-1.12.0-0-ga698c89)
|
|
Machine UUID 47e92900-9bf3-11e2-88a3-862bc1bd2a6d
|
|
EHCI init on dev 00:1a.0 (regs=0xcfd27020)
|
|
EHCI init on dev 00:1d.0 (regs=0xcfd28020)
|
|
AHCI controller at 00:1f.2, iobase 0xcfd26000, irq 11
|
|
Found 0 lpt ports
|
|
Found 0 serial ports
|
|
Searching bootorder for: /pci@i0cf8/*@1f,2/drive@1/disk@0
|
|
AHCI/1: registering: "DVD/CD [AHCI/1: HL-DT-ST DVDRAM GU40N ATAPI-7 DVD/CD]"
|
|
Searching bootorder for: /pci@i0cf8/*@1f,2/drive@0/disk@0
|
|
AHCI/0: Set transfer mode to UDMA-6
|
|
AHCI/0: registering: "AHCI/0: Samsung SSD 840 EVO 250GB ATA-9 Hard-Disk (232 GiBytes)"
|
|
Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/storage@1/*@0/*@0,0
|
|
Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/usb-*@1
|
|
USB MSC vendor='Generic-' product='Multi-Card' rev='1.00' type=0 removable=1
|
|
Initialized USB HUB (0 ports used)
|
|
Initialized USB HUB (0 ports used)
|
|
PS2 keyboard initialized
|
|
Device reports MEDIUM NOT PRESENT
|
|
scsi_is_ready returned -1
|
|
Unable to configure USB MSC drive.
|
|
Unable to configure USB MSC device.
|
|
Initialized USB HUB (0 ports used)
|
|
All threads complete.
|
|
Scan for option roms
|
|
|
|
Press ESC for boot menu.
|
|
|
|
Searching bootorder for: HALT
|
|
drive 0x000f6530: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=488397168
|
|
Space available for UMB: d0000-ed800, f5e40-f6500
|
|
Returned 253952 bytes of ZoneHigh
|
|
e820 map has 11 items:
|
|
0: 0000000000000000 - 000000000009fc00 = 1 RAM
|
|
1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
|
|
2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
|
|
3: 0000000000100000 - 00000000bf702000 = 1 RAM
|
|
4: 00000000bf702000 - 00000000c0000000 = 2 RESERVED
|
|
5: 00000000c1c00000 - 00000000c4000000 = 2 RESERVED
|
|
6: 00000000d0000000 - 00000000f0000000 = 2 RESERVED
|
|
7: 00000000fed00000 - 00000000fee00000 = 2 RESERVED
|
|
8: 0000000100000000 - 00000001fc000000 = 1 RAM
|
|
9: 00000001fc000000 - 0000000200000000 = 2 RESERVED
|
|
10: 0000000200000000 - 0000000238000000 = 1 RAM
|
|
enter handle_19:
|
|
NULL
|
|
Booting from DVD/CD...
|
|
Device reports MEDIUM NOT PRESENT
|
|
scsi_is_ready returned -1
|
|
Boot failed: Could not read from CDROM (code 0003)
|
|
enter handle_18:
|
|
NULL
|
|
Booting from Hard Disk...
|
|
Booting from 0000:7c00
|
|
|