coreboot

Hello,
Before opening an issue on memtest issue tracker,
I would like to know if the DDR3 SPD reading is correct because with memtest 7.20 (64bit build),
the main screen is fully empty, instead of showing:

Memory SPD Information
----
- Slot 0 : RAM SIZE / SPEED / PART NUMBER
- Slot 1 : RAM SIZE / SPEED / PART NUMBER

Also, no mention of the RAM CAS just above. It is empty.
Otherwise the test is running correctly.

I'm having the same issue with a t400, r400 & t500 and memtest 7.20 (and earlier)
All my lenovo are running coreboot 24.12 and have CONFIG_DUMP_SMBIOS_TYPE17=y
Otherwise dmidecode have no issue reporting those values, see below.

Any advice appreciated. Thanks.

$ dmidecode -t 17
# dmidecode 3.6
Getting SMBIOS data from sysfs.
SMBIOS 3.0 present.

Handle 0x000A, DMI type 17, 40 bytes
Memory Device
    Array Handle: 0x0009
    Error Information Handle: Not Provided
    Total Width: 64 bits
    Data Width: 64 bits
    Size: 4 GB
    Form Factor: SODIMM
    Set: None
    Locator: Channel-0-DIMM-0
    Bank Locator: BANK 0
    Type: DDR3
    Type Detail: Unknown Synchronous
    Speed: 1067 MT/s
    Manufacturer: Samsung
    Serial Number: 4608a20b
    Asset Tag: Channel-0-DIMM-0-AssetTag
    Part Number: M471B5273CH0-CF8
    Rank: 2
    Configured Memory Speed: 1067 MT/s
    Minimum Voltage: Unknown
    Maximum Voltage: Unknown
    Configured Voltage: Unknown

Handle 0x000B, DMI type 17, 40 bytes
Memory Device
    Array Handle: 0x0009
    Error Information Handle: Not Provided
    Total Width: 64 bits
    Data Width: 64 bits
    Size: 4 GB
    Form Factor: SODIMM
    Set: None
    Locator: Channel-1-DIMM-0
    Bank Locator: BANK 1
    Type: DDR3
    Type Detail: Unknown Synchronous
    Speed: 1067 MT/s
    Manufacturer: Samsung
    Serial Number: 4608a20b
    Asset Tag: Channel-1-DIMM-0-AssetTag
    Part Number: M471B5273CH0-CF8
    Rank: 2
    Configured Memory Speed: 1067 MT/s
    Minimum Voltage: Unknown
    Maximum Voltage: Unknown
    Configured Voltage: Unknown