coreboot

[ 0.000000] Linux version 6.5.0-4-amd64 (debian-kernel@lists.debian.org) (gcc-13 (Debian 13.2.0-6) 13.2.0, GNU ld (GNU Binutils for Debian) 2.41) #1 SMP PREEMPT_DYNAMIC Debian 6.5.10-1 (2023-11-03)

[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.5.0-4-amd64 root=/dev/mapper/TP--230t--vg-root ro iomem=relaxed scsi_mod.scan=sync

[ 0.000000] BIOS-provided physical RAM map:

[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable

[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved

[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ecb3fff] usable

[ 0.000000] BIOS-e820: [mem 0x000000007ecb4000-0x000000007ee1bfff] reserved

[ 0.000000] BIOS-e820: [mem 0x000000007ee1c000-0x000000007fe20fff] usable

[ 0.000000] BIOS-e820: [mem 0x000000007fe21000-0x000000008e9fffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved

[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004715fffff] usable

[ 0.000000] NX (Execute Disable) protection: active

[ 0.000000] SMBIOS 3.0.0 present.

[ 0.000000] DMI: LENOVO 20OJKGY/20OJKGY, BIOS CBET4000 4.21-834-g49509473c753 11/06/2023

[ 0.000000] tsc: Fast TSC calibration using PIT

[ 0.000000] tsc: Detected 2294.620 MHz processor

[ 0.001508] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[ 0.001512] e820: remove [mem 0x000a0000-0x000fffff] usable

[ 0.001519] last_pfn = 0x471600 max_arch_pfn = 0x400000000

[ 0.001525] MTRR map: 7 entries (3 fixed + 4 variable; max 23), built from 10 variable MTRRs

[ 0.001528] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT

[ 0.001832] x2apic: enabled by BIOS, switching to x2apic ops

[ 0.001833] last_pfn = 0x7fe21 max_arch_pfn = 0x400000000

[ 0.015280] RAMDISK: [mem 0x2d39b000-0x329c4fff]

[ 0.015286] ACPI: Early table checksum verification disabled

[ 0.015290] ACPI: RSDP 0x00000000000F5FF0 000024 (v02 COREv4)

[ 0.015296] ACPI: XSDT 0x000000007FE4D0E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20230628)

[ 0.015303] ACPI: FACP 0x000000007FE50BB0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20230628)

[ 0.015309] ACPI: DSDT 0x000000007FE4D280 003924 (v02 COREv4 COREBOOT 20110725 INTL 20230628)

[ 0.015314] ACPI: FACS 0x000000007FE4D240 000040

[ 0.015317] ACPI: FACS 0x000000007FE4D240 000040

[ 0.015320] ACPI: SSDT 0x000000007FE50CD0 002E4B (v02 COREv4 COREBOOT 00000000 CORE 20230628)

[ 0.015324] ACPI: MCFG 0x000000007FE53B20 00003C (v01 COREv4 COREBOOT 00000000 CORE 20230628)

[ 0.015328] ACPI: TCPA 0x000000007FE53B60 000032 (v02 COREv4 COREBOOT 00000000 CORE 20230628)

[ 0.015332] ACPI: APIC 0x000000007FE53BA0 00009E (v03 COREv4 COREBOOT 00000000 CORE 20230628)

[ 0.015335] ACPI: DMAR 0x000000007FE53C40 0000C0 (v01 COREv4 COREBOOT 00000000 CORE 20230628)

[ 0.015339] ACPI: HPET 0x000000007FE53D00 000038 (v01 COREv4 COREBOOT 00000000 CORE 20230628)

[ 0.015342] ACPI: Reserving FACP table memory at [mem 0x7fe50bb0-0x7fe50cc3]

[ 0.015344] ACPI: Reserving DSDT table memory at [mem 0x7fe4d280-0x7fe50ba3]

[ 0.015345] ACPI: Reserving FACS table memory at [mem 0x7fe4d240-0x7fe4d27f]

[ 0.015346] ACPI: Reserving FACS table memory at [mem 0x7fe4d240-0x7fe4d27f]

[ 0.015348] ACPI: Reserving SSDT table memory at [mem 0x7fe50cd0-0x7fe53b1a]

[ 0.015349] ACPI: Reserving MCFG table memory at [mem 0x7fe53b20-0x7fe53b5b]

[ 0.015350] ACPI: Reserving TCPA table memory at [mem 0x7fe53b60-0x7fe53b91]

[ 0.015351] ACPI: Reserving APIC table memory at [mem 0x7fe53ba0-0x7fe53c3d]

[ 0.015352] ACPI: Reserving DMAR table memory at [mem 0x7fe53c40-0x7fe53cff]

[ 0.015353] ACPI: Reserving HPET table memory at [mem 0x7fe53d00-0x7fe53d37]

[ 0.015364] Setting APIC routing to cluster x2apic.

[ 0.015423] No NUMA configuration found

[ 0.015424] Faking a node at [mem 0x0000000000000000-0x00000004715fffff]

[ 0.015435] NODE_DATA(0) allocated [mem 0x4715c8000-0x4715f2fff]

[ 0.015766] Zone ranges:

[ 0.015768] DMA [mem 0x0000000000001000-0x0000000000ffffff]

[ 0.015770] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]

[ 0.015772] Normal [mem 0x0000000100000000-0x00000004715fffff]

[ 0.015774] Device empty

[ 0.015775] Movable zone start for each node

[ 0.015779] Early memory node ranges

[ 0.015779] node 0: [mem 0x0000000000001000-0x000000000009efff]

[ 0.015781] node 0: [mem 0x0000000000100000-0x000000007ecb3fff]

[ 0.015783] node 0: [mem 0x000000007ee1c000-0x000000007fe20fff]

[ 0.015784] node 0: [mem 0x0000000100000000-0x00000004715fffff]

[ 0.015787] Initmem setup node 0 [mem 0x0000000000001000-0x00000004715fffff]

[ 0.015793] On node 0, zone DMA: 1 pages in unavailable ranges

[ 0.015819] On node 0, zone DMA: 97 pages in unavailable ranges

[ 0.019525] On node 0, zone DMA32: 360 pages in unavailable ranges

[ 0.019876] On node 0, zone Normal: 479 pages in unavailable ranges

[ 0.020180] On node 0, zone Normal: 27136 pages in unavailable ranges

[ 0.020188] Reserving Intel graphics memory at [mem 0x80a00000-0x8e9fffff]

[ 0.020393] ACPI: PM-Timer IO Port: 0x508

[ 0.020402] ACPI: X2APIC_NMI (uid[0xffffffff] high edge lint[0x1])

[ 0.020405] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])

[ 0.020417] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23

[ 0.020420] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)

[ 0.020423] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[ 0.020428] ACPI: Using ACPI (MADT) for SMP configuration information

[ 0.020429] ACPI: HPET id: 0x8086a701 base: 0xfed00000

[ 0.020435] TSC deadline timer available

[ 0.020436] smpboot: Allowing 8 CPUs, 0 hotplug CPUs

[ 0.020450] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]

[ 0.020452] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]

[ 0.020454] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]

[ 0.020455] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]

[ 0.020456] PM: hibernation: Registered nosave memory: [mem 0x7ecb4000-0x7ee1bfff]

[ 0.020458] PM: hibernation: Registered nosave memory: [mem 0x7fe21000-0x8e9fffff]

[ 0.020459] PM: hibernation: Registered nosave memory: [mem 0x8ea00000-0xefffffff]

[ 0.020460] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]

[ 0.020461] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]

[ 0.020462] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]

[ 0.020463] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]

[ 0.020464] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfed91fff]

[ 0.020465] PM: hibernation: Registered nosave memory: [mem 0xfed92000-0xffffffff]

[ 0.020467] [mem 0x8ea00000-0xefffffff] available for PCI devices

[ 0.020469] Booting paravirtualized kernel on bare hardware

[ 0.020471] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns

[ 0.026421] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1

[ 0.026883] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144

[ 0.026890] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152

[ 0.026893] pcpu-alloc: [0] 0 1 2 3 4 5 6 7

[ 0.026918] Kernel command line: BOOT_IMAGE=/vmlinuz-6.5.0-4-amd64 root=/dev/mapper/TP--230t--vg-root ro iomem=relaxed scsi_mod.scan=sync

[ 0.026990] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.5.0-4-amd64", will be passed to user space.

[ 0.027014] random: crng init done

[ 0.028860] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)

[ 0.029844] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)

[ 0.029993] Fallback order for Node 0: 0

[ 0.029998] Built 1 zonelists, mobility grouping on. Total pages: 4068718

[ 0.030000] Policy zone: Normal

[ 0.030009] mem auto-init: stack:all(zero), heap alloc:on, heap free:off

[ 0.030018] software IO TLB: area num 8.

[ 0.054678] Memory: 2069816K/16533852K available (14336K kernel code, 2346K rwdata, 10340K rodata, 3920K init, 18144K bss, 497576K reserved, 0K cma-reserved)

[ 0.055011] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1

[ 0.055028] Kernel/User page tables isolation: enabled

[ 0.055070] ftrace: allocating 42178 entries in 165 pages

[ 0.063935] ftrace: allocated 165 pages with 4 groups

[ 0.064706] Dynamic Preempt: voluntary

[ 0.064751] rcu: Preemptible hierarchical RCU implementation.

[ 0.064752] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.

[ 0.064754] Trampoline variant of Tasks RCU enabled.

[ 0.064755] Rude variant of Tasks RCU enabled.

[ 0.064755] Tracing variant of Tasks RCU enabled.

[ 0.064756] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.

[ 0.064757] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8

[ 0.068422] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16

[ 0.068631] rcu: srcu_init: Setting srcu_struct sizes based on contention.

[ 0.068701] spurious 8259A interrupt: IRQ7.

[ 0.070228] Console: colour VGA+ 80x25

[ 0.070231] printk: console [tty0] enabled

[ 0.078115] ACPI: Core revision 20230331

[ 0.078245] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns

[ 0.078337] APIC: Switch to symmetric I/O mode setup

[ 0.078399] DMAR: Host address width 36

[ 0.078456] DMAR: DRHD base: 0x000000fed90000 flags: 0x0

[ 0.078520] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a

[ 0.078598] DMAR: DRHD base: 0x000000fed91000 flags: 0x1

[ 0.078661] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a

[ 0.078737] DMAR: RMRR base: 0x00000080800000 end: 0x0000008e9fffff

[ 0.078801] DMAR-IR: IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1

[ 0.078863] DMAR-IR: HPET id 0 under DRHD base 0xfed91000

[ 0.078925] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.

[ 0.079548] DMAR-IR: Enabled IRQ remapping in x2apic mode

[ 0.080089] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 0.098338] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x21135b1969c, max_idle_ns: 440795304650 ns

[ 0.098424] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.24 BogoMIPS (lpj=9178480)

[ 0.098531] CPU0: Thermal monitoring enabled (TM1)

[ 0.098617] process: using mwait in idle threads

[ 0.098681] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8

[ 0.098743] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0

[ 0.098807] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization

[ 0.098885] Spectre V2 : Mitigation: Retpolines

[ 0.098944] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch

[ 0.099022] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT

[ 0.099086] Spectre V2 : Enabling Restricted Speculation for firmware calls

[ 0.099151] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier

[ 0.099227] Spectre V2 : User space: Mitigation: STIBP via prctl

[ 0.099289] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl

[ 0.099368] MDS: Mitigation: Clear CPU buffers

[ 0.099427] MMIO Stale Data: Unknown: No mitigations

[ 0.099912] SRBDS: Vulnerable: No microcode

[ 0.099975] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'

[ 0.100052] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'

[ 0.100114] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'

[ 0.100178] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256

[ 0.100241] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.

[ 0.121661] Freeing SMP alternatives memory: 36K

[ 0.121727] pid_max: default: 32768 minimum: 301

[ 0.121842] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,integrity

[ 0.121937] landlock: Up and running.

[ 0.121997] Yama: disabled by default; enable with sysctl kernel.yama.*

[ 0.122080] AppArmor: AppArmor initialized

[ 0.122140] TOMOYO Linux initialized

[ 0.122200] LSM support for eBPF active

[ 0.122303] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)

[ 0.122396] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)

[ 0.122788] smpboot: CPU0: Intel(R) Core(TM) i7-3615QE CPU @ 2.30GHz (family: 0x6, model: 0x3a, stepping: 0x9)

[ 0.123046] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.

[ 0.123128] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.

[ 0.123221] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.

[ 0.123314] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.

[ 0.123411] ... version: 3

[ 0.123471] ... bit width: 48

[ 0.123529] ... generic registers: 4

[ 0.123588] ... value mask: 0000ffffffffffff

[ 0.123649] ... max period: 00007fffffffffff

[ 0.123709] ... fixed-purpose events: 3

[ 0.123769] ... event mask: 000000070000000f

[ 0.124003] signal: max sigframe size: 1776

[ 0.124083] Estimated ratio of average max frequency by base frequency (times 1024): 1380

[ 0.124190] rcu: Hierarchical SRCU implementation.

[ 0.124251] rcu: Max phase no-delay instances is 1000.

[ 0.125066] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.

[ 0.125231] smp: Bringing up secondary CPUs ...

[ 0.125429] smpboot: x86: Booting SMP configuration:

[ 0.125489] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7

[ 0.144423] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.

[ 0.150464] smp: Brought up 1 node, 8 CPUs

[ 0.150500] smpboot: Max logical packages: 1

[ 0.150560] smpboot: Total of 8 processors activated (36713.92 BogoMIPS)

[ 0.172537] node 0 deferred pages initialised in 24ms

[ 0.175825] devtmpfs: initialized

[ 0.175825] x86/mm: Memory block size: 128MB

[ 0.178901] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns

[ 0.178901] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)

[ 0.178901] pinctrl core: initialized pinctrl subsystem

[ 0.179419] NET: Registered PF_NETLINK/PF_ROUTE protocol family

[ 0.179751] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations

[ 0.179970] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations

[ 0.180200] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations

[ 0.180313] audit: initializing netlink subsys (disabled)

[ 0.180393] audit: type=2000 audit(1699318124.100:1): state=initialized audit_enabled=0 res=1

[ 0.180393] thermal_sys: Registered thermal governor 'fair_share'

[ 0.180393] thermal_sys: Registered thermal governor 'bang_bang'

[ 0.180393] thermal_sys: Registered thermal governor 'step_wise'

[ 0.180393] thermal_sys: Registered thermal governor 'user_space'

[ 0.180393] thermal_sys: Registered thermal governor 'power_allocator'

[ 0.180393] cpuidle: using governor ladder

[ 0.180393] cpuidle: using governor menu

[ 0.180393] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[ 0.180393] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)

[ 0.180393] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved as E820 entry

[ 0.180393] PCI: Using configuration type 1 for base access

[ 0.180393] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on

[ 0.182513] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.

[ 0.182598] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages

[ 0.182598] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page

[ 0.182598] ACPI: Added _OSI(Module Device)

[ 0.182598] ACPI: Added _OSI(Processor Device)

[ 0.182649] ACPI: Added _OSI(3.0 _SCP Extensions)

[ 0.182708] ACPI: Added _OSI(Processor Aggregator Device)

[ 0.185540] ACPI: 2 ACPI AML tables successfully acquired and loaded

[ 0.186948] ACPI: EC: EC started

[ 0.186948] ACPI: EC: interrupt blocked

[ 0.187187] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62

[ 0.187248] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions

[ 0.187325] ACPI: Interpreter enabled

[ 0.187399] ACPI: PM: (supports S0 S1 S3 S4 S5)

[ 0.187459] ACPI: Using IOAPIC for interrupt routing

[ 0.187539] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[ 0.187617] PCI: Ignoring E820 reservations for host bridge windows

[ 0.187818] ACPI: Enabled 1 GPEs in block 00 to 3F

[ 0.193212] ACPI: \_TZ_.THM0.FPWR: New power resource

[ 0.193578] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[ 0.193648] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]

[ 0.193756] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]

[ 0.193843] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge

[ 0.194005] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])

[ 0.194093] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d05ff])

[ 0.194426] PCI host bridge to bus 0000:00

[ 0.194486] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]

[ 0.194550] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]

[ 0.194614] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000cbfff window]

[ 0.194692] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000fffff window]

[ 0.194768] pci_bus 0000:00: root bus resource [mem 0x8ea00000-0xefffffff window]

[ 0.194844] pci_bus 0000:00: root bus resource [mem 0x471600000-0xfffffffff window]

[ 0.194918] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]

[ 0.194994] pci_bus 0000:00: root bus resource [bus 00-ff]

[ 0.195071] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000

[ 0.195239] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000

[ 0.195311] pci 0000:00:02.0: reg 0x10: [mem 0xfdc00000-0xfdffffff 64bit]

[ 0.195381] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]

[ 0.195460] pci 0000:00:02.0: reg 0x20: [io 0xefc0-0xefff]

[ 0.195534] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]

[ 0.195714] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330

[ 0.195797] pci 0000:00:14.0: reg 0x10: [mem 0xfd1d0000-0xfd1dffff 64bit]

[ 0.195931] pci 0000:00:14.0: PME# supported from D3hot D3cold

[ 0.196080] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000

[ 0.196157] pci 0000:00:19.0: reg 0x10: [mem 0xfd1e0000-0xfd1fffff]

[ 0.196227] pci 0000:00:19.0: reg 0x14: [mem 0xfd1cb000-0xfd1cbfff]

[ 0.196296] pci 0000:00:19.0: reg 0x18: [io 0xefa0-0xefbf]

[ 0.196419] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold

[ 0.196546] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320

[ 0.196624] pci 0000:00:1a.0: reg 0x10: [mem 0xfd1c8000-0xfd1c83ff]

[ 0.196771] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold

[ 0.196934] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300

[ 0.197013] pci 0000:00:1b.0: reg 0x10: [mem 0xfd1cc000-0xfd1cffff 64bit]

[ 0.197157] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

[ 0.197336] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400

[ 0.197552] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[ 0.197650] pci 0000:00:1c.0: Enabling MPC IRBNCE

[ 0.197713] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled

[ 0.197886] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400

[ 0.198101] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold

[ 0.198198] pci 0000:00:1c.1: Enabling MPC IRBNCE

[ 0.198261] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled

[ 0.198438] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400

[ 0.198656] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold

[ 0.198751] pci 0000:00:1c.2: Enabling MPC IRBNCE

[ 0.198812] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled

[ 0.198985] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320

[ 0.199062] pci 0000:00:1d.0: reg 0x10: [mem 0xfd1c7000-0xfd1c73ff]

[ 0.199211] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold

[ 0.199365] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100

[ 0.199639] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601

[ 0.199714] pci 0000:00:1f.2: reg 0x10: [io 0xef78-0xef7f]

[ 0.199782] pci 0000:00:1f.2: reg 0x14: [io 0xef6c-0xef6f]

[ 0.199851] pci 0000:00:1f.2: reg 0x18: [io 0xef70-0xef77]

[ 0.199920] pci 0000:00:1f.2: reg 0x1c: [io 0xef68-0xef6b]

[ 0.199989] pci 0000:00:1f.2: reg 0x20: [io 0xef80-0xef9f]

[ 0.200058] pci 0000:00:1f.2: reg 0x24: [mem 0xfd1c9000-0xfd1c97ff]

[ 0.200162] pci 0000:00:1f.2: PME# supported from D3hot

[ 0.200303] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500

[ 0.200382] pci 0000:00:1f.3: reg 0x10: [mem 0xfd1c6000-0xfd1c60ff 64bit]

[ 0.200466] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]

[ 0.200617] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000

[ 0.200699] pci 0000:00:1f.6: reg 0x10: [mem 0xfd1ca000-0xfd1cafff 64bit]

[ 0.200998] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.

[ 0.201492] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501

[ 0.201605] pci 0000:01:00.0: reg 0x10: [mem 0xfd300000-0xfd3000ff]

[ 0.201992] pci 0000:01:00.0: supports D1 D2

[ 0.202053] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.202401] pci 0000:00:1c.0: PCI bridge to [bus 01]

[ 0.202431] pci 0000:00:1c.0: bridge window [mem 0xfd300000-0xfd3fffff]

[ 0.202676] pci 0000:02:00.0: [8086:2725] type 00 class 0x028000

[ 0.202839] pci 0000:02:00.0: reg 0x10: [mem 0xfd200000-0xfd203fff 64bit]

[ 0.203434] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold

[ 0.204075] pci 0000:00:1c.1: PCI bridge to [bus 02]

[ 0.204144] pci 0000:00:1c.1: bridge window [mem 0xfd200000-0xfd2fffff]

[ 0.204291] pci 0000:00:1c.2: PCI bridge to [bus 03-0b]

[ 0.204356] pci 0000:00:1c.2: bridge window [io 0xf000-0xffff]

[ 0.204422] pci 0000:00:1c.2: bridge window [mem 0xfd400000-0xfdbfffff]

[ 0.204493] pci 0000:00:1c.2: bridge window [mem 0xff0000000-0xfffffffff 64bit pref]

[ 0.204759] ACPI: PCI: Interrupt link LNKA configured for IRQ 11

[ 0.204865] ACPI: PCI: Interrupt link LNKB configured for IRQ 11

[ 0.204968] ACPI: PCI: Interrupt link LNKC configured for IRQ 11

[ 0.205066] ACPI: PCI: Interrupt link LNKD configured for IRQ 11

[ 0.205167] ACPI: PCI: Interrupt link LNKE configured for IRQ 11

[ 0.205268] ACPI: PCI: Interrupt link LNKF configured for IRQ 11

[ 0.205366] ACPI: PCI: Interrupt link LNKG configured for IRQ 11

[ 0.205465] ACPI: PCI: Interrupt link LNKH configured for IRQ 11

[ 0.206579] ACPI: EC: interrupt unblocked

[ 0.206640] ACPI: EC: event unblocked

[ 0.206702] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62

[ 0.206762] ACPI: EC: GPE=0x11

[ 0.206821] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC initialization complete

[ 0.206885] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events

[ 0.207043] iommu: Default domain type: Translated

[ 0.207043] iommu: DMA domain TLB invalidation policy: lazy mode

[ 0.207043] pps_core: LinuxPPS API ver. 1 registered

[ 0.207043] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

[ 0.207043] PTP clock support registered

[ 0.207043] EDAC MC: Ver: 3.0.0

[ 0.207043] NetLabel: Initializing

[ 0.207043] NetLabel: domain hash size = 128

[ 0.207043] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO

[ 0.207043] NetLabel: unlabeled traffic allowed by default

[ 0.207043] PCI: Using ACPI for IRQ routing

[ 0.208778] PCI: pci_cache_line_size set to 64 bytes

[ 0.208782] pci 0000:00:1c.0: can't claim BAR 14 [mem 0xfd300000-0xfd3fffff]: no compatible bridge window

[ 0.208863] pci 0000:00:1c.1: can't claim BAR 14 [mem 0xfd200000-0xfd2fffff]: no compatible bridge window

[ 0.208942] pci 0000:00:1c.2: can't claim BAR 14 [mem 0xfd400000-0xfdbfffff]: no compatible bridge window

[ 0.209022] pci 0000:00:02.0: can't claim BAR 0 [mem 0xfdc00000-0xfdffffff 64bit]: no compatible bridge window

[ 0.209104] pci 0000:00:14.0: can't claim BAR 0 [mem 0xfd1d0000-0xfd1dffff 64bit]: no compatible bridge window

[ 0.210426] pci 0000:00:19.0: can't claim BAR 0 [mem 0xfd1e0000-0xfd1fffff]: no compatible bridge window

[ 0.210501] pci 0000:00:19.0: can't claim BAR 1 [mem 0xfd1cb000-0xfd1cbfff]: no compatible bridge window

[ 0.210581] pci 0000:00:1a.0: can't claim BAR 0 [mem 0xfd1c8000-0xfd1c83ff]: no compatible bridge window

[ 0.210662] pci 0000:00:1b.0: can't claim BAR 0 [mem 0xfd1cc000-0xfd1cffff 64bit]: no compatible bridge window

[ 0.210750] pci 0000:01:00.0: can't claim BAR 0 [mem 0xfd300000-0xfd3000ff]: no compatible bridge window

[ 0.210841] pci 0000:02:00.0: can't claim BAR 0 [mem 0xfd200000-0xfd203fff 64bit]: no compatible bridge window

[ 0.210924] pci 0000:00:1d.0: can't claim BAR 0 [mem 0xfd1c7000-0xfd1c73ff]: no compatible bridge window

[ 0.211007] pci 0000:00:1f.2: can't claim BAR 5 [mem 0xfd1c9000-0xfd1c97ff]: no compatible bridge window

[ 0.211088] pci 0000:00:1f.3: can't claim BAR 0 [mem 0xfd1c6000-0xfd1c60ff 64bit]: no compatible bridge window

[ 0.211169] pci 0000:00:1f.6: can't claim BAR 0 [mem 0xfd1ca000-0xfd1cafff 64bit]: no compatible bridge window

[ 0.211281] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]

[ 0.211284] e820: reserve RAM buffer [mem 0x7ecb4000-0x7fffffff]

[ 0.211285] e820: reserve RAM buffer [mem 0x7fe21000-0x7fffffff]

[ 0.211287] e820: reserve RAM buffer [mem 0x471600000-0x473ffffff]

[ 0.211308] pci 0000:00:02.0: vgaarb: setting as boot VGA device

[ 0.211308] pci 0000:00:02.0: vgaarb: bridge control possible

[ 0.211308] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none

[ 0.211308] vgaarb: loaded

[ 0.212222] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0

[ 0.212296] hpet0: 8 comparators, 64-bit 14.318180 MHz counter

[ 0.214471] clocksource: Switched to clocksource tsc-early

[ 0.214691] VFS: Disk quotas dquot_6.6.0

[ 0.214763] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[ 0.214969] AppArmor: AppArmor Filesystem Enabled

[ 0.215050] pnp: PnP ACPI init

[ 0.215175] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved

[ 0.215379] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved

[ 0.215445] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved

[ 0.215508] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved

[ 0.215572] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved

[ 0.215636] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved

[ 0.215701] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved

[ 0.215766] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved

[ 0.215830] system 00:01: [mem 0x20000000-0x201fffff] could not be reserved

[ 0.215891] system 00:01: [mem 0x40000000-0x401fffff] could not be reserved

[ 0.216327] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved

[ 0.216440] system 00:03: [io 0x0500-0x057f] has been reserved

[ 0.216504] system 00:03: [io 0x0480-0x04bf] has been reserved

[ 0.216702] pnp: PnP ACPI: found 8 devices

[ 0.222818] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

[ 0.222982] NET: Registered PF_INET protocol family

[ 0.223218] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)

[ 0.227261] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)

[ 0.227374] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)

[ 0.227521] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)

[ 0.227858] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)

[ 0.228254] TCP: Hash tables configured (established 131072 bind 65536)

[ 0.228418] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)

[ 0.228551] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)

[ 0.228664] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)

[ 0.228813] NET: Registered PF_UNIX/PF_LOCAL protocol family

[ 0.228880] NET: Registered PF_XDP protocol family

[ 0.228949] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03-0b] add_size 200000 add_align 100000

[ 0.229043] pci 0000:00:02.0: BAR 0: assigned [mem 0x471800000-0x471bfffff 64bit]

[ 0.229124] pci 0000:00:1c.0: BAR 14: assigned [mem 0x8ea00000-0x8eafffff]

[ 0.229189] pci 0000:00:1c.1: BAR 14: assigned [mem 0x8eb00000-0x8ebfffff]

[ 0.229254] pci 0000:00:1c.2: BAR 14: assigned [mem 0x8ec00000-0x8edfffff]

[ 0.229320] pci 0000:00:19.0: BAR 0: assigned [mem 0x8ee00000-0x8ee1ffff]

[ 0.229388] pci 0000:00:14.0: BAR 0: assigned [mem 0x471600000-0x47160ffff 64bit]

[ 0.229473] pci 0000:00:1b.0: BAR 0: assigned [mem 0x471610000-0x471613fff 64bit]

[ 0.229556] pci 0000:00:19.0: BAR 1: assigned [mem 0x8ee20000-0x8ee20fff]

[ 0.229623] pci 0000:00:1f.6: BAR 0: assigned [mem 0x471614000-0x471614fff 64bit]

[ 0.229708] pci 0000:00:1f.2: BAR 5: assigned [mem 0x8ee21000-0x8ee217ff]

[ 0.229775] pci 0000:00:1a.0: BAR 0: assigned [mem 0x8ee21800-0x8ee21bff]

[ 0.229841] pci 0000:00:1d.0: BAR 0: assigned [mem 0x8ee21c00-0x8ee21fff]

[ 0.229910] pci 0000:00:1f.3: BAR 0: assigned [mem 0x471615000-0x4716150ff 64bit]

[ 0.229996] pci 0000:01:00.0: BAR 0: assigned [mem 0x8ea00000-0x8ea000ff]

[ 0.230068] pci 0000:00:1c.0: PCI bridge to [bus 01]

[ 0.230136] pci 0000:00:1c.0: bridge window [mem 0x8ea00000-0x8eafffff]

[ 0.230210] pci 0000:02:00.0: BAR 0: assigned [mem 0x8eb00000-0x8eb03fff 64bit]

[ 0.230331] pci 0000:00:1c.1: PCI bridge to [bus 02]

[ 0.230397] pci 0000:00:1c.1: bridge window [mem 0x8eb00000-0x8ebfffff]

[ 0.230483] pci 0000:00:1c.2: PCI bridge to [bus 03-0b]

[ 0.230546] pci 0000:00:1c.2: bridge window [io 0xf000-0xffff]

[ 0.230614] pci 0000:00:1c.2: bridge window [mem 0x8ec00000-0x8edfffff]

[ 0.230680] pci 0000:00:1c.2: bridge window [mem 0xff0000000-0xfffffffff 64bit pref]

[ 0.230764] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]

[ 0.230828] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]

[ 0.230890] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000cbfff window]

[ 0.230953] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000fffff window]

[ 0.231016] pci_bus 0000:00: resource 8 [mem 0x8ea00000-0xefffffff window]

[ 0.231080] pci_bus 0000:00: resource 9 [mem 0x471600000-0xfffffffff window]

[ 0.231145] pci_bus 0000:00: resource 10 [mem 0xfed40000-0xfed44fff window]

[ 0.231209] pci_bus 0000:01: resource 1 [mem 0x8ea00000-0x8eafffff]

[ 0.231273] pci_bus 0000:02: resource 1 [mem 0x8eb00000-0x8ebfffff]

[ 0.231336] pci_bus 0000:03: resource 0 [io 0xf000-0xffff]

[ 0.231399] pci_bus 0000:03: resource 1 [mem 0x8ec00000-0x8edfffff]

[ 0.231461] pci_bus 0000:03: resource 2 [mem 0xff0000000-0xfffffffff 64bit pref]

[ 0.232257] PCI: CLS 64 bytes, default 64

[ 0.232334] DMAR: No ATSR found

[ 0.232389] Trying to unpack rootfs image as initramfs...

[ 0.232391] DMAR: No SATC found

[ 0.232393] DMAR: IOMMU feature pgsel_inv inconsistent

[ 0.232513] DMAR: IOMMU feature pass_through inconsistent

[ 0.232575] DMAR: dmar0: Using Queued invalidation

[ 0.232702] DMAR: dmar1: Using Queued invalidation

[ 0.314709] pci 0000:00:02.0: Adding to iommu group 0

[ 0.314828] pci 0000:00:00.0: Adding to iommu group 1

[ 0.314902] pci 0000:00:14.0: Adding to iommu group 2

[ 0.314974] pci 0000:00:19.0: Adding to iommu group 3

[ 0.315046] pci 0000:00:1a.0: Adding to iommu group 4

[ 0.315119] pci 0000:00:1b.0: Adding to iommu group 5

[ 0.315193] pci 0000:00:1c.0: Adding to iommu group 6

[ 0.315685] pci 0000:00:1c.1: Adding to iommu group 7

[ 0.315758] pci 0000:00:1c.2: Adding to iommu group 8

[ 0.315830] pci 0000:00:1d.0: Adding to iommu group 9

[ 0.315916] pci 0000:00:1f.0: Adding to iommu group 10

[ 0.315989] pci 0000:00:1f.2: Adding to iommu group 10

[ 0.316059] pci 0000:00:1f.3: Adding to iommu group 10

[ 0.316130] pci 0000:00:1f.6: Adding to iommu group 10

[ 0.316202] pci 0000:01:00.0: Adding to iommu group 11

[ 0.316274] pci 0000:02:00.0: Adding to iommu group 12

[ 0.317462] DMAR: Intel(R) Virtualization Technology for Directed I/O

[ 0.317529] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[ 0.317593] software IO TLB: mapped [mem 0x000000007acb4000-0x000000007ecb4000] (64MB)

[ 0.318154] Initialise system trusted keyrings

[ 0.318227] Key type blacklist registered

[ 0.318349] workingset: timestamp_bits=36 max_order=22 bucket_order=0

[ 0.318448] zbud: loaded

[ 0.318711] integrity: Platform Keyring initialized

[ 0.318777] integrity: Machine keyring initialized

[ 0.318839] Key type asymmetric registered

[ 0.318900] Asymmetric key parser 'x509' registered

[ 0.992006] Freeing initrd memory: 88232K

[ 0.998160] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)

[ 0.998288] io scheduler mq-deadline registered

[ 0.999510] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26

[ 0.999820] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27

[ 1.000125] pcieport 0000:00:1c.2: PME: Signaling with IRQ 28

[ 1.000224] pcieport 0000:00:1c.2: pciehp: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+

[ 1.000471] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[ 1.003071] thermal LNXTHERM:00: registered as thermal_zone0

[ 1.003139] ACPI: thermal: Thermal Zone [THM0] (67 C)

[ 1.004162] thermal LNXTHERM:01: registered as thermal_zone1

[ 1.004229] ACPI: thermal: Thermal Zone [THM1] (27 C)

[ 1.004463] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[ 1.005297] Linux agpgart interface v0.103

[ 1.010460] tpm_tis 00:07: 1.2 TPM (device-id 0x0, rev-id 78)

[ 1.138644] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.

[ 1.139519] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12

[ 1.142853] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 1.142921] serio: i8042 AUX port at 0x60,0x64 irq 12

[ 1.143105] mousedev: PS/2 mouse device common for all mice

[ 1.143202] rtc_cmos 00:04: RTC can wake from S4

[ 1.143572] rtc_cmos 00:04: registered as rtc0

[ 1.143676] rtc_cmos 00:04: setting system clock to 2023-11-07T00:48:45 UTC (1699318125)

[ 1.143796] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram

[ 1.144148] intel_pstate: Intel P-state driver initializing

[ 1.144864] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0

[ 1.145361] ledtrig-cpu: registered to indicate activity on CPUs

[ 1.159466] NET: Registered PF_INET6 protocol family

[ 1.167283] Segment Routing with IPv6

[ 1.167361] In-situ OAM (IOAM) with IPv6

[ 1.167453] mip6: Mobile IPv6

[ 1.167517] NET: Registered PF_PACKET protocol family

[ 1.167760] mpls_gso: MPLS GSO support

[ 1.169053] microcode: Microcode Update Driver: v2.2.

[ 1.169060] IPI shorthand broadcast: enabled

[ 1.170528] sched_clock: Marking stable (1160002723, 9757306)->(1172156955, -2396926)

[ 1.170959] registered taskstats version 1

[ 1.171113] Loading compiled-in X.509 certificates

[ 1.196306] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'

[ 1.196441] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'

[ 1.199873] Key type .fscrypt registered

[ 1.199956] Key type fscrypt-provisioning registered

[ 1.206852] Key type encrypted registered

[ 1.206930] AppArmor: AppArmor sha1 policy hashing enabled

[ 1.206999] ima: Allocated hash algorithm: sha256

[ 1.305866] ima: No architecture policies found

[ 1.305937] evm: Initialising EVM extended attributes:

[ 1.305995] evm: security.selinux

[ 1.306050] evm: security.SMACK64 (disabled)

[ 1.306107] evm: security.SMACK64EXEC (disabled)

[ 1.306165] evm: security.SMACK64TRANSMUTE (disabled)

[ 1.306223] evm: security.SMACK64MMAP (disabled)

[ 1.306280] evm: security.apparmor

[ 1.306334] evm: security.ima

[ 1.306389] evm: security.capability

[ 1.306445] evm: HMAC attrs: 0x1

[ 1.329781] tsc: Refined TSC clocksource calibration: 2294.787 MHz

[ 1.329868] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113f8b171d, max_idle_ns: 440795241185 ns

[ 1.329994] clocksource: Switched to clocksource tsc

[ 1.413347] RAS: Correctable Errors collector initialized.

[ 1.413573] clk: Disabling unused clocks

[ 1.416051] Freeing unused decrypted memory: 2036K

[ 1.417142] Freeing unused kernel image (initmem) memory: 3920K

[ 1.425817] Write protecting the kernel read-only data: 26624k

[ 1.427021] Freeing unused kernel image (rodata/data gap) memory: 1948K

[ 1.512299] x86/mm: Checked W+X mappings: passed, no W+X pages found.

[ 1.512363] x86/mm: Checking user space page tables

[ 1.554722] x86/mm: Checked W+X mappings: passed, no W+X pages found.

[ 1.554785] Run /init as init process

[ 1.554841] with arguments:

[ 1.554842] /init

[ 1.554843] with environment:

[ 1.554844] HOME=/

[ 1.554844] TERM=linux

[ 1.554845] BOOT_IMAGE=/vmlinuz-6.5.0-4-amd64

[ 1.761557] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input2

[ 1.779316] ACPI: button: Sleep Button [SLPB]

[ 1.779470] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20230331/utaddress-204)

[ 1.779490] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input3

[ 1.779646] ACPI: OSL: Resource conflict; ACPI support missing from driver?

[ 1.779811] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20230331/utaddress-204)

[ 1.779924] ACPI: OSL: Resource conflict; ACPI support missing from driver?

[ 1.779986] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20230331/utaddress-204)

[ 1.780078] ACPI: OSL: Resource conflict; ACPI support missing from driver?

[ 1.780149] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20230331/utaddress-204)

[ 1.780305] ACPI: OSL: Resource conflict; ACPI support missing from driver?

[ 1.780370] lpc_ich: Resource conflict(s) found affecting gpio_ich

[ 1.787044] ACPI: battery: Slot [BAT0] (battery present)

[ 1.787493] ACPI: battery: Slot [BAT1] (battery absent)

[ 1.789501] ACPI: button: Lid Switch [LID]

[ 1.797209] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt

[ 1.798028] i2c i2c-0: 2/2 memory slots populated (from DMI)

[ 1.798932] i2c i2c-0: Successfully instantiated SPD at 0x50

[ 1.799330] i2c i2c-0: Successfully instantiated SPD at 0x51

[ 1.806013] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4

[ 1.809993] ACPI: button: Power Button [PWRF]

[ 1.812762] ACPI: bus type USB registered

[ 1.813620] sdhci: Secure Digital Host Controller Interface driver

[ 1.813686] sdhci: Copyright(c) Pierre Ossman

[ 1.813832] usbcore: registered new interface driver usbfs

[ 1.815179] e1000e: Intel(R) PRO/1000 Network Driver

[ 1.815243] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.

[ 1.815766] usbcore: registered new interface driver hub

[ 1.816444] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode

[ 1.816765] usbcore: registered new device driver usb

[ 1.818262] SCSI subsystem initialized

[ 1.841207] cryptd: max_cpu_qlen set to 1000

[ 1.841572] ACPI: bus type drm_connector registered

[ 1.848197] ehci-pci 0000:00:1d.0: EHCI Host Controller

[ 1.848272] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1

[ 1.848357] ehci-pci 0000:00:1d.0: debug port 2

[ 1.849060] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)

[ 1.849360] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes

[ 1.849657] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA

[ 1.852667] ehci-pci 0000:00:1d.0: irq 18, io mem 0x8ee21c00

[ 1.854115] AVX version of gcm_enc/dec engaged.

[ 1.854216] AES CTR mode by8 optimization enabled

[ 1.865782] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00

[ 1.865949] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05

[ 1.865960] libata version 3.00 loaded.

[ 1.866027] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 1.866099] usb usb1: Product: EHCI Host Controller

[ 1.866158] usb usb1: Manufacturer: Linux 6.5.0-4-amd64 ehci_hcd

[ 1.866218] usb usb1: SerialNumber: 0000:00:1d.0

[ 1.866566] hub 1-0:1.0: USB hub found

[ 1.866632] hub 1-0:1.0: 3 ports detected

[ 1.866813] ehci-pci 0000:00:1a.0: EHCI Host Controller

[ 1.866881] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 2

[ 1.866964] ehci-pci 0000:00:1a.0: debug port 2

[ 1.870969] ehci-pci 0000:00:1a.0: irq 19, io mem 0x8ee21800

[ 1.889793] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00

[ 1.890218] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05

[ 1.890294] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 1.890366] usb usb2: Product: EHCI Host Controller

[ 1.890837] usb usb2: Manufacturer: Linux 6.5.0-4-amd64 ehci_hcd

[ 1.890897] usb usb2: SerialNumber: 0000:00:1a.0

[ 1.891168] hub 2-0:1.0: USB hub found

[ 1.891265] hub 2-0:1.0: 3 ports detected

[ 1.893710] xhci_hcd 0000:00:14.0: xHCI Host Controller

[ 1.893794] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3

[ 1.894984] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930

[ 1.895249] xhci_hcd 0000:00:14.0: xHCI Host Controller

[ 1.895312] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4

[ 1.895390] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed

[ 1.895547] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05

[ 1.895624] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 1.895695] usb usb3: Product: xHCI Host Controller

[ 1.895754] usb usb3: Manufacturer: Linux 6.5.0-4-amd64 xhci-hcd

[ 1.895814] usb usb3: SerialNumber: 0000:00:14.0

[ 1.896018] hub 3-0:1.0: USB hub found

[ 1.896089] hub 3-0:1.0: 4 ports detected

[ 1.896345] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05

[ 1.896421] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 1.896493] usb usb4: Product: xHCI Host Controller

[ 1.896551] usb usb4: Manufacturer: Linux 6.5.0-4-amd64 xhci-hcd

[ 1.896614] usb usb4: SerialNumber: 0000:00:14.0

[ 1.896872] hub 4-0:1.0: USB hub found

[ 1.896947] hub 4-0:1.0: 4 ports detected

[ 1.899040] ahci 0000:00:1f.2: version 3.0

[ 1.899258] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled

[ 1.909413] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode

[ 1.909498] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst

[ 1.910361] scsi host0: ahci

[ 1.910611] scsi host1: ahci

[ 1.910835] scsi host2: ahci

[ 1.911059] scsi host3: ahci

[ 1.911249] scsi host4: ahci

[ 1.911456] scsi host5: ahci

[ 1.911593] ata1: SATA max UDMA/133 abar m2048@0x8ee21000 port 0x8ee21100 irq 31

[ 1.911670] ata2: SATA max UDMA/133 abar m2048@0x8ee21000 port 0x8ee21180 irq 31

[ 1.911743] ata3: SATA max UDMA/133 abar m2048@0x8ee21000 port 0x8ee21200 irq 31

[ 1.911817] ata4: DUMMY

[ 1.911874] ata5: DUMMY

[ 1.911931] ata6: DUMMY

[ 1.939827] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock

[ 2.037684] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 54:ee:75:13:62:87

[ 2.037807] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection

[ 2.037931] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF

[ 2.121809] usb 1-1: new high-speed USB device number 2 using ehci-pci

[ 2.145797] usb 2-1: new high-speed USB device number 2 using ehci-pci

[ 2.149800] usb 3-1: new high-speed USB device number 2 using xhci_hcd

[ 2.224577] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[ 2.225487] ata1.00: supports DRM functions and may not be fully accessible

[ 2.225571] ata1.00: ATA-10: KINGSTON SKC6001024G, S4500109, max UDMA/133

[ 2.225714] ata1.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 32), AA

[ 2.227016] ata1.00: Features: Trust Dev-Sleep

[ 2.227377] ata1.00: supports DRM functions and may not be fully accessible

[ 2.228428] ata1.00: configured for UDMA/133

[ 2.239057] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC6001 0109 PQ: 0 ANSI: 5

[ 2.278344] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00

[ 2.278447] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 2.279086] hub 1-1:1.0: USB hub found

[ 2.279343] hub 1-1:1.0: 8 ports detected

[ 2.298454] usb 3-1: New USB device found, idVendor=045b, idProduct=0209, bcdDevice= 1.00

[ 2.298587] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 2.299490] hub 3-1:1.0: USB hub found

[ 2.299652] hub 3-1:1.0: 3 ports detected

[ 2.306189] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00

[ 2.306289] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 2.306769] hub 2-1:1.0: USB hub found

[ 2.306939] hub 2-1:1.0: 6 ports detected

[ 2.425970] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd

[ 2.448136] usb 4-1: New USB device found, idVendor=045b, idProduct=0210, bcdDevice= 1.00

[ 2.448240] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 2.449493] hub 4-1:1.0: USB hub found

[ 2.449818] hub 4-1:1.0: 3 ports detected

[ 2.552296] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[ 2.565802] usb 1-1.5: new full-speed USB device number 3 using ehci-pci

[ 2.573804] usb 3-3: new high-speed USB device number 3 using xhci_hcd

[ 2.584240] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133

[ 2.593797] usb 2-1.3: new full-speed USB device number 3 using ehci-pci

[ 2.613279] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA

[ 2.676716] usb 1-1.5: New USB device found, idVendor=056a, idProduct=00e6, bcdDevice= 1.39

[ 2.676822] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 2.676914] usb 1-1.5: Product: ISD-V4

[ 2.676983] usb 1-1.5: Manufacturer: Tablet

[ 2.696054] hid: raw HID events driver (C) Jiri Kosina

[ 2.699912] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]

[ 2.703519] usb 2-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01

[ 2.703623] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 2.703714] usb 2-1.3: Product: Biometric Coprocessor

[ 2.703785] usb 2-1.3: Manufacturer: Auth

[ 2.722225] usb 3-3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= 0.00

[ 2.722329] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 2.723082] hub 3-3:1.0: USB hub found

[ 2.723213] hub 3-3:1.0: 4 ports detected

[ 2.736348] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]

[ 2.761800] usb 1-1.6: new full-speed USB device number 4 using ehci-pci

[ 2.781801] usb 2-1.4: new full-speed USB device number 4 using ehci-pci

[ 2.801803] usb 3-1.2: new high-speed USB device number 4 using xhci_hcd

[ 2.809807] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905

[ 2.809932] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0

[ 2.857299] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5

[ 2.876085] usb 1-1.6: New USB device found, idVendor=08e6, idProduct=34ec, bcdDevice= 1.00

[ 2.876188] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 2.876280] usb 1-1.6: Product: GemPC Express

[ 2.876350] usb 1-1.6: Manufacturer: Gemplus

[ 2.893719] usb 2-1.4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.11

[ 2.893838] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 2.893930] usb 2-1.4: Product: USB Receiver

[ 2.894000] usb 2-1.4: Manufacturer: Logitech

[ 2.907091] usb 3-1.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.12

[ 2.907204] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 2.907301] usb 3-1.2: Product: USB2.0 Hub

[ 2.907372] usb 3-1.2: Manufacturer: GenesysLogic

[ 2.908348] hub 3-1.2:1.0: USB hub found

[ 2.908889] hub 3-1.2:1.0: 4 ports detected

[ 2.923173] usbcore: registered new interface driver usbhid

[ 2.923256] usbhid: USB HID core driver

[ 2.960711] ata2.00: configured for UDMA/133

[ 2.970263] scsi 1:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5

[ 2.977798] usb 2-1.5: new full-speed USB device number 5 using ehci-pci

[ 2.982054] usb 4-1.2: new SuperSpeed USB device number 3 using xhci_hcd

[ 3.005437] usb 4-1.2: New USB device found, idVendor=05e3, idProduct=0612, bcdDevice=92.12

[ 3.005541] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 3.005633] usb 4-1.2: Product: USB3.0 Hub

[ 3.005707] usb 4-1.2: Manufacturer: GenesysLogic

[ 3.006897] hub 4-1.2:1.0: USB hub found

[ 3.007347] hub 4-1.2:1.0: 4 ports detected

[ 3.085803] usb 3-1.3: new full-speed USB device number 5 using xhci_hcd

[ 3.088452] usb 2-1.5: New USB device found, idVendor=8087, idProduct=0032, bcdDevice= 0.00

[ 3.088557] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 3.165793] usb 2-1.6: new high-speed USB device number 6 using ehci-pci

[ 3.189451] usb 3-1.3: New USB device found, idVendor=056d, idProduct=4027, bcdDevice=80.00

[ 3.189553] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 3.189643] usb 3-1.3: Product: EIZO USB HID Monitor

[ 3.189714] usb 3-1.3: Manufacturer: EIZO

[ 3.203269] input: Tablet ISD-V4 Stylus as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:056A:00E6.0001/input/input7

[ 3.203597] input: Tablet ISD-V4 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:056A:00E6.0001/input/input8

[ 3.204052] hid-generic 0003:056A:00E6.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input0

[ 3.205450] input: Tablet ISD-V4 Touchscreen as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:056A:00E6.0002/input/input9

[ 3.205696] input: Tablet ISD-V4 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:056A:00E6.0002/input/input10

[ 3.205921] input: Tablet ISD-V4 Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:056A:00E6.0002/input/input11

[ 3.206220] hid-generic 0003:056A:00E6.0002: input,hiddev1,hidraw1: USB HID v1.11 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input1

[ 3.206669] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:046D:C52B.0003/input/input12

[ 3.265797] usb 3-3.3: new full-speed USB device number 6 using xhci_hcd

[ 3.266153] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input0

[ 3.266817] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:046D:C52B.0004/input/input13

[ 3.267171] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:046D:C52B.0004/input/input14

[ 3.281856] usb 2-1.6: New USB device found, idVendor=04f2, idProduct=b2ea, bcdDevice= 5.20

[ 3.281962] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 3.282054] usb 2-1.6: Product: Integrated Camera

[ 3.282125] usb 2-1.6: Manufacturer: Chicony Electronics Co., Ltd.

[ 3.284317] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 3.285113] ata3.00: supports DRM functions and may not be fully accessible

[ 3.285196] ata3.00: ATA-10: KINGSTON SKC600MS256G, S4800105, max UDMA/133

[ 3.285306] ata3.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA

[ 3.286398] ata3.00: Features: Trust Dev-Sleep

[ 3.286636] ata3.00: supports DRM functions and may not be fully accessible

[ 3.287776] ata3.00: configured for UDMA/133

[ 3.298356] scsi 2:0:0:0: Direct-Access ATA KINGSTON SKC600M 0105 PQ: 0 ANSI: 5

[ 3.302582] e1000e 0000:00:19.0 eno0: renamed from eth0

[ 3.319935] sd 0:0:0:0: [sdc] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB)

[ 3.319939] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)

[ 3.319941] sd 2:0:0:0: [sdb] 4096-byte physical blocks

[ 3.319942] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)

[ 3.319946] sd 1:0:0:0: [sda] 4096-byte physical blocks

[ 3.319964] sd 1:0:0:0: [sda] Write Protect is off

[ 3.319968] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 3.320016] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 3.320028] sd 0:0:0:0: [sdc] 4096-byte physical blocks

[ 3.320067] sd 1:0:0:0: [sda] Preferred minimum I/O size 4096 bytes

[ 3.320122] sd 2:0:0:0: [sdb] Write Protect is off

[ 3.320180] sd 0:0:0:0: [sdc] Write Protect is off

[ 3.320244] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00

[ 3.320304] sd 0:0:0:0: [sdc] Mode Sense: 00 3a 00 00

[ 3.320408] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 3.320477] sd 0:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 3.320566] sd 2:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes

[ 3.320677] sd 0:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes

[ 3.321426] sdb: sdb1 sdb2 sdb3

[ 3.321668] sd 2:0:0:0: [sdb] supports TCG Opal

[ 3.321728] sd 2:0:0:0: [sdb] Attached SCSI disk

[ 3.323297] sdc: sdc1 sdc2 < sdc5 >

[ 3.323642] sd 0:0:0:0: [sdc] supports TCG Opal

[ 3.323702] sd 0:0:0:0: [sdc] Attached SCSI disk

[ 3.329943] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:046D:C52B.0004/input/input15

[ 3.330292] hid-generic 0003:046D:C52B.0004: input,hiddev2,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input1

[ 3.330784] hid-generic 0003:046D:C52B.0005: hiddev3,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input2

[ 3.331285] hid-generic 0003:056D:4027.0006: hiddev4,hidraw5: USB HID v1.10 Device [EIZO EIZO USB HID Monitor] on usb-0000:00:14.0-1.3/input0

[ 3.333235] sda: sda1

[ 3.333379] sd 1:0:0:0: [sda] Attached SCSI disk

[ 3.366544] usb 3-3.3: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00

[ 3.366623] usb 3-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 3.366694] usb 3-3.3: Product: USB-Serial Controller D

[ 3.366752] usb 3-3.3: Manufacturer: Prolific Technology Inc.

[ 3.563716] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3

[ 3.803613] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6

[ 3.822913] i915 0000:00:02.0: [drm] VT-d active for gfx access

[ 3.823003] i915 0000:00:02.0: vgaarb: deactivate vga console

[ 3.823410] Console: switching to colour dummy device 80x25

[ 3.823468] i915 0000:00:02.0: [drm] Using Transparent Hugepages

[ 3.823473] i915 0000:00:02.0: [drm] DMAR active, disabling use of stolen memory

[ 3.874826] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem

[ 3.927278] i915 0000:00:02.0: [drm] Skipping intel_backlight registration

[ 3.927688] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

[ 3.927863] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

[ 3.927930] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17

[ 3.966772] input: Wacom ISDv4 E6 Pen as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:056A:00E6.0001/input/input18

[ 3.990548] wacom 0003:056A:00E6.0001: hidraw0: USB HID v1.11 Device [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input0

[ 3.991871] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input2

[ 4.055215] input: Wacom ISDv4 E6 Finger as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:056A:00E6.0002/input/input22

[ 4.055631] wacom 0003:056A:00E6.0002: hidraw1: USB HID v1.11 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input1

[ 4.118719] input: Logitech Wireless Device PID:406f Keyboard as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.4/2-1.4:1.2/0003:046D:C52B.0005/0003:046D:406F.0007/input/input24

[ 4.119624] input: Logitech Wireless Device PID:406f Mouse as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.4/2-1.4:1.2/0003:046D:C52B.0005/0003:046D:406F.0007/input/input25

[ 4.119934] hid-generic 0003:046D:406F.0007: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Device PID:406f] on usb-0000:00:1a.0-1.4/input2:1

[ 4.218748] usb 3-1.2-port1: Cannot enable. Maybe the USB cable is bad?

[ 4.366515] input: Logitech MX Ergo as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.4/2-1.4:1.2/0003:046D:C52B.0005/0003:046D:406F.0007/input/input29

[ 4.367171] logitech-hidpp-device 0003:046D:406F.0007: input,hidraw3: USB HID v1.11 Keyboard [Logitech MX Ergo] on usb-0000:00:1a.0-1.4/input2:1

[ 4.758149] acpi device:0d: registered as cooling_device9

[ 4.909962] fbcon: i915drmfb (fb0) is primary device

[ 5.154249] usb 4-1.2.4: new SuperSpeed USB device number 4 using xhci_hcd

[ 5.178511] usb 4-1.2.4: New USB device found, idVendor=05e3, idProduct=0748, bcdDevice=12.09

[ 5.178522] usb 4-1.2.4: New USB device strings: Mfr=3, Product=4, SerialNumber=2

[ 5.178525] usb 4-1.2.4: Product: USB Storage

[ 5.178528] usb 4-1.2.4: Manufacturer: Generic

[ 5.178530] usb 4-1.2.4: SerialNumber: 000000001209

[ 5.193288] usb-storage 4-1.2.4:1.0: USB Mass Storage device detected

[ 5.193689] scsi host6: usb-storage 4-1.2.4:1.0

[ 5.193879] usbcore: registered new interface driver usb-storage

[ 5.257854] usb 3-3.4: new high-speed USB device number 9 using xhci_hcd

[ 5.358452] usb 3-3.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11

[ 5.358462] usb 3-3.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0

[ 5.358466] usb 3-3.4: Product: USB 2.0 Hub

[ 5.359263] hub 3-3.4:1.0: USB hub found

[ 5.359334] hub 3-3.4:1.0: 4 ports detected

[ 5.765869] usb 3-3.4.1: new full-speed USB device number 10 using xhci_hcd

[ 5.778547] Console: switching to colour frame buffer device 170x48

[ 5.798301] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

[ 5.828884] usbcore: registered new interface driver uas

[ 5.860565] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.

[ 5.860656] device-mapper: uevent: version 1.0.3

[ 5.860783] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com

[ 5.969761] raid6: sse2x4 gen() 11839 MB/s

[ 5.986519] usb 3-3.4.1: New USB device found, idVendor=0557, idProduct=8021, bcdDevice= 1.00

[ 5.987227] usb 3-3.4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 5.990449] hub 3-3.4.1:1.0: USB hub found

[ 5.991361] hub 3-3.4.1:1.0: 4 ports detected

[ 6.037760] raid6: sse2x2 gen() 16319 MB/s

[ 6.105762] raid6: sse2x1 gen() 11872 MB/s

[ 6.106616] raid6: using algorithm sse2x2 gen() 16319 MB/s

[ 6.173764] raid6: .... xor() 8616 MB/s, rmw enabled

[ 6.174437] raid6: using ssse3x2 recovery algorithm

[ 6.176782] xor: automatically using best checksumming function avx

[ 6.178146] async_tx: api initialized (async)

[ 6.193777] usb 3-3.4.2: new full-speed USB device number 11 using xhci_hcd

[ 6.231254] scsi 6:0:0:0: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6

[ 6.232484] scsi 6:0:0:1: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6

[ 6.233157] sd 6:0:0:0: [sdd] Media removed, stopped polling

[ 6.233607] sd 6:0:0:0: [sdd] Attached SCSI removable disk

[ 6.233929] sd 6:0:0:1: [sde] Media removed, stopped polling

[ 6.234351] sd 6:0:0:1: [sde] Attached SCSI removable disk

[ 6.235794] scsi 6:0:0:2: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6

[ 6.237132] sd 6:0:0:2: [sdf] Media removed, stopped polling

[ 6.237512] sd 6:0:0:2: [sdf] Attached SCSI removable disk

[ 6.238420] scsi 6:0:0:3: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6

[ 6.239699] sd 6:0:0:3: [sdg] Media removed, stopped polling

[ 6.240098] sd 6:0:0:3: [sdg] Attached SCSI removable disk

[ 6.241662] scsi 6:0:0:4: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6

[ 6.243126] sd 6:0:0:4: [sdh] Media removed, stopped polling

[ 6.243354] sd 6:0:0:4: [sdh] Attached SCSI removable disk

[ 6.418536] usb 3-3.4.2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11

[ 6.418603] usb 3-3.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 6.418641] usb 3-3.4.2: Product: USB Receiver

[ 6.418666] usb 3-3.4.2: Manufacturer: Logitech

[ 6.434864] logitech-djreceiver 0003:046D:C52B.000A: hiddev1,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3.4.2/input2

[ 6.493903] usb 3-3.4.1.1: new full-speed USB device number 12 using xhci_hcd

[ 6.564117] input: Logitech MX Ergo as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4.2/3-3.4.2:1.2/0003:046D:C52B.000A/0003:046D:406F.000B/input/input30

[ 6.564715] logitech-hidpp-device 0003:046D:406F.000B: input,hidraw6: USB HID v1.11 Keyboard [Logitech MX Ergo] on usb-0000:00:14.0-3.4.2/input2:1

[ 6.623573] usb 3-3.4.1.1: New USB device found, idVendor=04d9, idProduct=a0d1, bcdDevice= 1.00

[ 6.623644] usb 3-3.4.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 6.623681] usb 3-3.4.1.1: Product: Varmilo Keyboard

[ 6.623708] usb 3-3.4.1.1: Manufacturer: AONE

[ 6.643227] input: AONE Varmilo Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4.1/3-3.4.1.1/3-3.4.1.1:1.0/0003:04D9:A0D1.000C/input/input31

[ 6.702320] hid-generic 0003:04D9:A0D1.000C: input,hidraw7: USB HID v1.10 Keyboard [AONE Varmilo Keyboard] on usb-0000:00:14.0-3.4.1.1/input0

[ 6.714862] input: AONE Varmilo Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4.1/3-3.4.1.1/3-3.4.1.1:1.1/0003:04D9:A0D1.000D/input/input32

[ 6.774171] hid-generic 0003:04D9:A0D1.000D: input,hidraw8: USB HID v1.10 Keyboard [AONE Varmilo Keyboard] on usb-0000:00:14.0-3.4.1.1/input1

[ 6.781255] hid-generic 0003:04D9:A0D1.000E: hiddev2,hidraw9: USB HID v1.10 Device [AONE Varmilo Keyboard] on usb-0000:00:14.0-3.4.1.1/input2

[ 15.476830] Btrfs loaded, zoned=yes, fsverity=yes

[ 15.924362] PM: Image not found (code -22)

[ 16.619267] EXT4-fs (dm-1): mounted filesystem a2506fa6-fc3c-4dca-a86a-3cdefd9fdca5 ro with ordered data mode. Quota mode: none.

[ 16.718923] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.

[ 16.850055] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.

[ 16.872596] systemd[1]: Inserted module 'autofs4'

[ 16.896620] systemd[1]: systemd 254.5-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)

[ 16.899083] systemd[1]: Detected architecture x86-64.

[ 16.902540] systemd[1]: Hostname set to <TP-230t>.

[ 17.358015] systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly.

[ 17.434828] systemd[1]: Queued start job for default target graphical.target.

[ 17.464447] systemd[1]: Created slice system-getty.slice - Slice /system/getty.

[ 17.465823] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.

[ 17.467538] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice - Encrypted Volume Units Service Slice.

[ 17.469172] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.

[ 17.472270] systemd[1]: Created slice user.slice - User and Session Slice.

[ 17.474908] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.

[ 17.479634] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.

[ 17.484055] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.

[ 17.488476] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.

[ 17.490062] systemd[1]: Reached target remote-fs.target - Remote File Systems.

[ 17.493990] systemd[1]: Reached target slices.target - Slice Units.

[ 17.497797] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.

[ 17.501423] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.

[ 17.504972] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.

[ 17.508516] systemd[1]: Listening on syslog.socket - Syslog Socket.

[ 17.517607] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.

[ 17.519623] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.

[ 17.522541] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.

[ 17.525662] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).

[ 17.528565] systemd[1]: Listening on systemd-journald.socket - Journal Socket.

[ 17.531428] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.

[ 17.533776] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.

[ 17.554199] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...

[ 17.557406] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...

[ 17.560222] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...

[ 17.563149] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...

[ 17.564525] systemd[1]: Finished blk-availability.service - Availability of block devices.

[ 17.569215] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...

[ 17.572538] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...

[ 17.574847] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...

[ 17.577588] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...

[ 17.579998] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...

[ 17.582768] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...

[ 17.585683] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...

[ 17.588886] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...

[ 17.592214] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...

[ 17.593609] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).

[ 17.598269] systemd[1]: Starting systemd-journald.service - Journal Service...

[ 17.600941] loop: module loaded

[ 17.602156] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...

[ 17.603215] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).

[ 17.605208] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...

[ 17.605216] fuse: init (API version 7.38)

[ 17.611014] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...

[ 17.615142] systemd-journald[534]: Collecting audit messages is disabled.

[ 17.616032] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.

[ 17.617877] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.

[ 17.619791] EXT4-fs (dm-1): re-mounted a2506fa6-fc3c-4dca-a86a-3cdefd9fdca5 r/w. Quota mode: none.

[ 17.621193] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.

[ 17.623339] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.

[ 17.625482] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.

[ 17.628247] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.

[ 17.628308] lp: driver loaded but no devices found

[ 17.631709] systemd[1]: modprobe@configfs.service: Deactivated successfully.

[ 17.631963] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.

[ 17.633315] ppdev: user-space parallel port driver

[ 17.637246] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.

[ 17.638766] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.

[ 17.641577] systemd[1]: modprobe@drm.service: Deactivated successfully.

[ 17.642987] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.

[ 17.645651] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.

[ 17.647239] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.

[ 17.650315] systemd[1]: modprobe@fuse.service: Deactivated successfully.

[ 17.651694] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.

[ 17.654158] systemd[1]: modprobe@loop.service: Deactivated successfully.

[ 17.655487] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.

[ 17.657947] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.

[ 17.659157] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.

[ 17.710064] systemd[1]: Activating swap swapfile.swap - /swapfile...

[ 17.713049] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...

[ 17.715896] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...

[ 17.717662] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).

[ 17.717757] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).

[ 17.717772] Adding 16777212k swap on /swapfile. Priority:-2 extents:1081 across:750534656k SSFS

[ 17.719580] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...

[ 17.723034] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.

[ 17.724831] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...

[ 17.727957] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...

[ 17.730407] systemd[1]: Activated swap swapfile.swap - /swapfile.

[ 17.732304] systemd[1]: Started systemd-journald.service - Journal Service.

[ 17.761909] systemd-journald[534]: Received client request to flush runtime journal.

[ 17.937518] sd 0:0:0:0: Attached scsi generic sg0 type 0

[ 17.944865] sd 1:0:0:0: Attached scsi generic sg1 type 0

[ 17.954582] sd 2:0:0:0: Attached scsi generic sg2 type 0

[ 17.955540] sd 6:0:0:0: Attached scsi generic sg3 type 0

[ 17.964825] sd 6:0:0:1: Attached scsi generic sg4 type 0

[ 17.967747] sd 6:0:0:2: Attached scsi generic sg5 type 0

[ 17.970646] sd 6:0:0:3: Attached scsi generic sg6 type 0

[ 17.972542] sd 6:0:0:4: Attached scsi generic sg7 type 0

[ 17.995026] Adding 1003516k swap on /dev/mapper/TP--230t--vg-swap_1. Priority:-3 extents:1 across:1003516k SSFS

[ 18.059835] ACPI: AC: AC Adapter [AC] (on-line)

[ 18.089049] iTCO_vendor_support: vendor-support=0

[ 18.090047] Non-volatile memory driver v1.3

[ 18.109637] input: PC Speaker as /devices/platform/pcspkr/input/input33

[ 18.113709] iTCO_wdt iTCO_wdt.1.auto: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)

[ 18.115637] thinkpad_acpi: ThinkPad ACPI Extras v0.26

[ 18.116557] thinkpad_acpi: http://ibm-acpi.sf.net/

[ 18.117460] thinkpad_acpi: ThinkPad BIOS CBET4000 4.21-834-g49509473c753, EC GCHT25WW-3.22

[ 18.118325] thinkpad_acpi: Lenovo ThinkPad X230 Tablet, model 20OJKGY

[ 18.129184] thinkpad_acpi: radio switch found; radios are enabled

[ 18.130232] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode

[ 18.131145] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver

[ 18.131973] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...

[ 18.135623] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)

[ 18.143012] at24 0-0050: supply vcc not found, using dummy regulator

[ 18.145036] at24 0-0050: 256 byte spd EEPROM, read-only

[ 18.146772] at24 0-0051: supply vcc not found, using dummy regulator

[ 18.149289] at24 0-0051: 256 byte spd EEPROM, read-only

[ 18.150353] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked

[ 18.159069] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one

[ 18.160256] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)

[ 18.163521] thinkpad_acpi: battery 1 registered (start 0, stop 100, behaviours: 0x1)

[ 18.164535] ACPI: battery: new extension: ThinkPad Battery Extension

[ 18.165784] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input34

[ 18.226411] gsmi: no gsmi handler in firmware

[ 18.226558] cfg80211: Loading compiled-in X.509 certificates for regulatory database

[ 18.226868] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'

[ 18.227156] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'

[ 18.227456] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'

[ 18.230649] platform regulatory.0: firmware: direct-loading firmware regulatory.db

[ 18.233719] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s

[ 18.244317] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer

[ 18.245272] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules

[ 18.246254] RAPL PMU: hw unit of domain package 2^-16 Joules

[ 18.247233] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules

[ 18.294673] Intel(R) Wireless WiFi driver for Linux

[ 18.298517] iwlwifi 0000:02:00.0: Detected crf-id 0x400410, cnv-id 0x400410 wfpm id 0x80000000

[ 18.299579] iwlwifi 0000:02:00.0: PCI dev 2725/0024, rev=0x420, rfid=0x10d000

[ 18.305433] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

[ 18.307785] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-ty-a0-gf-a0-83.ucode

[ 18.323707] iwlwifi 0000:02:00.0: api flags index 2 larger than supported by driver

[ 18.324742] iwlwifi 0000:02:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.41

[ 18.326746] iwlwifi 0000:02:00.0: firmware: failed to load iwl-debug-yoyo.bin (-2)

[ 18.327726] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware

[ 18.328879] iwlwifi 0000:02:00.0: firmware: failed to load iwl-debug-yoyo.bin (-2)

[ 18.329960] iwlwifi 0000:02:00.0: loaded firmware version 83.e8f84e98.0 ty-a0-gf-a0-83.ucode op_mode iwlmvm

[ 18.343683] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker

[ 18.344705] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

[ 18.345512] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)

[ 18.346333] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0

[ 18.347320] snd_hda_codec_realtek hdaudioC0D0: inputs:

[ 18.348410] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18

[ 18.349361] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19

[ 18.350158] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12

[ 18.494908] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input35

[ 18.495974] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input36

[ 18.523074] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input37

[ 18.523193] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input38

[ 18.525954] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input39

[ 18.527108] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input40

[ 18.528216] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input41

[ 18.529271] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input42

[ 18.538366] iwlwifi 0000:02:00.0: Detected Intel(R) Wi-Fi 6 AX210 160MHz, REV=0x420

[ 18.538527] thermal thermal_zone2: failed to read out thermal zone (-61)

[ 18.546453] intel_rapl_common: Found RAPL domain package

[ 18.547409] intel_rapl_common: Found RAPL domain core

[ 18.548315] intel_rapl_common: Found RAPL domain uncore

[ 18.552041] iwlwifi 0000:02:00.0: WRT: Invalid buffer destination

[ 18.607123] EXT4-fs (sda1): recovery complete

[ 18.608110] EXT4-fs (sda1): mounted filesystem 9887db5d-157c-40c4-9f3b-24ab2c23fe2f r/w with ordered data mode. Quota mode: none.

[ 18.713044] iwlwifi 0000:02:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x1f

[ 18.713887] iwlwifi 0000:02:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f

[ 18.713933] iwlwifi 0000:02:00.0: WFPM_AUTH_KEY_0: 0x90

[ 18.715579] iwlwifi 0000:02:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0

[ 18.716951] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-ty-a0-gf-a0.pnvm

[ 18.718325] iwlwifi 0000:02:00.0: loaded PNVM version e4a49534

[ 18.734036] iwlwifi 0000:02:00.0: Detected RF GF, rfid=0x10d000

[ 18.772180] EXT4-fs (sdc1): mounting ext2 file system using the ext4 subsystem

[ 18.774357] EXT4-fs (sdc1): mounted filesystem 5b16bf32-bba4-4e5d-9a2b-6e9cd7fa067d r/w without journal. Quota mode: none.

[ 18.804653] iwlwifi 0000:02:00.0: base HW address: f4:7b:09:ca:52:29

[ 18.814106] audit: type=1400 audit(1699314543.166:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1694 comm="apparmor_parser"

[ 18.815670] audit: type=1400 audit(1699314543.166:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1698 comm="apparmor_parser"

[ 18.817301] audit: type=1400 audit(1699314543.166:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1698 comm="apparmor_parser"

[ 18.820783] audit: type=1400 audit(1699314543.170:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="mariadbd_akonadi" pid=1696 comm="apparmor_parser"

[ 18.823020] audit: type=1400 audit(1699314543.170:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="mysqld_akonadi" pid=1697 comm="apparmor_parser"

[ 18.824621] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0

[ 18.825296] audit: type=1400 audit(1699314543.170:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/akonadiserver" pid=1701 comm="apparmor_parser"

[ 18.828979] audit: type=1400 audit(1699314543.178:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1705 comm="apparmor_parser"

[ 18.831418] audit: type=1400 audit(1699314543.178:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1705 comm="apparmor_parser"

[ 18.832710] audit: type=1400 audit(1699314543.178:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1705 comm="apparmor_parser"

[ 18.834033] audit: type=1400 audit(1699314543.178:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1700 comm="apparmor_parser"

[ 19.048199] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input43

[ 19.369870] NET: Registered PF_QIPCRTR protocol family

[ 19.667753] iwlwifi 0000:02:00.0: WRT: Invalid buffer destination

[ 19.772081] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)

[ 19.824347] iwlwifi 0000:02:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x1f

[ 19.825216] iwlwifi 0000:02:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f

[ 19.826086] iwlwifi 0000:02:00.0: WFPM_AUTH_KEY_0: 0x90

[ 19.826937] iwlwifi 0000:02:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0

[ 19.831101] mc: Linux media interface: v0.10

[ 19.848778] usbcore: registered new interface driver usbserial_generic

[ 19.849638] usbserial: USB Serial support registered for generic

[ 19.856310] usbcore: registered new interface driver pl2303

[ 19.856954] usbserial: USB Serial support registered for pl2303

[ 19.857180] videodev: Linux video capture interface: v2.00

[ 19.857801] pl2303 3-3.3:1.0: pl2303 converter detected

[ 19.860049] usb 3-3.3: pl2303 converter now attached to ttyUSB0

[ 19.916466] iwlwifi 0000:02:00.0: Registered PHC clock: iwlwifi-PTP, with index: 1

[ 19.918338] Bluetooth: Core ver 2.22

[ 19.919009] NET: Registered PF_BLUETOOTH protocol family

[ 19.919766] Bluetooth: HCI device and connection manager initialized

[ 19.920454] Bluetooth: HCI socket layer initialized

[ 19.921090] Bluetooth: L2CAP socket layer initialized

[ 19.921716] Bluetooth: SCO socket layer initialized

[ 19.946452] usb 2-1.6: Found UVC 1.00 device Integrated Camera (04f2:b2ea)

[ 19.953155] usbcore: registered new interface driver uvcvideo

[ 19.976669] iwlwifi 0000:02:00.0: WRT: Invalid buffer destination

[ 20.002237] usbcore: registered new interface driver btusb

[ 20.004940] Bluetooth: hci0: Firmware timestamp 2023.35 buildtype 1 build 70976

[ 20.011900] bluetooth hci0: firmware: direct-loading firmware intel/ibt-0041-0041.sfi

[ 20.016440] Bluetooth: hci0: Found device firmware: intel/ibt-0041-0041.sfi

[ 20.017127] Bluetooth: hci0: Boot Address: 0x100800

[ 20.017755] Bluetooth: hci0: Firmware Version: 98-13.23

[ 20.048778] usb 2-1.5: USB disconnect, device number 5

[ 20.051891] Bluetooth: hci0: FW download error recovery failed (-19)

[ 20.052573] Bluetooth: hci0: sending frame failed (-19)

[ 20.053420] Bluetooth: hci0: Reading supported features failed (-19)

[ 20.054132] Bluetooth: hci0: Error reading debug features

[ 20.104396] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[ 20.105028] Bluetooth: BNEP filters: protocol multicast

[ 20.105686] Bluetooth: BNEP socket layer initialized

[ 20.133136] iwlwifi 0000:02:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x1f

[ 20.133846] iwlwifi 0000:02:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f

[ 20.134566] iwlwifi 0000:02:00.0: WFPM_AUTH_KEY_0: 0x90

[ 20.135195] iwlwifi 0000:02:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0

[ 20.289356] process '/usr/bin/anydesk' started with executable stack

[ 20.429797] usb 2-1.5: new full-speed USB device number 7 using ehci-pci

[ 20.539771] usb 2-1.5: New USB device found, idVendor=8087, idProduct=0032, bcdDevice= 0.00

[ 20.540442] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 20.543927] Bluetooth: hci0: Device revision is 0

[ 20.544715] Bluetooth: hci0: Secure boot is enabled

[ 20.545497] Bluetooth: hci0: OTP lock is enabled

[ 20.546262] Bluetooth: hci0: API lock is enabled

[ 20.547000] Bluetooth: hci0: Debug lock is disabled

[ 20.547635] Bluetooth: hci0: Minimum firmware build 1 week 10 2014

[ 20.548343] Bluetooth: hci0: Bootloader timestamp 2019.40 buildtype 1 build 38

[ 20.549243] bluetooth hci0: firmware: direct-loading firmware intel/ibt-0041-0041.sfi

[ 20.554641] Bluetooth: hci0: Found device firmware: intel/ibt-0041-0041.sfi

[ 20.555501] Bluetooth: hci0: Boot Address: 0x100800

[ 20.556272] Bluetooth: hci0: Firmware Version: 98-13.23

[ 21.056448] pipewire[2960]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set

[ 21.977790] Bluetooth: hci0: Waiting for firmware download to complete

[ 21.978902] Bluetooth: hci0: Firmware loaded in 1390134 usecs

[ 21.978981] Bluetooth: hci0: Waiting for device to boot

[ 22.004927] Bluetooth: hci0: Device booted in 25389 usecs

[ 22.005187] bluetooth hci0: firmware: direct-loading firmware intel/ibt-0041-0041.ddc

[ 22.005206] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0041-0041.ddc

[ 22.006928] Bluetooth: hci0: Applying Intel DDC parameters completed

[ 22.007918] Bluetooth: hci0: No support for BT device in ACPI firmware

[ 22.009931] Bluetooth: hci0: Firmware timestamp 2023.13 buildtype 1 build 62562

[ 22.086207] Bluetooth: MGMT ver 1.22

[ 22.091004] NET: Registered PF_ALG protocol family

[ 22.112913] Bluetooth: RFCOMM TTY layer initialized

[ 22.112922] Bluetooth: RFCOMM socket layer initialized

[ 22.112927] Bluetooth: RFCOMM ver 1.11

[ 22.159983] Bluetooth: hci0: Bad flag given (0x1) vs supported (0x0)

[ 22.875787] e1000e 0000:00:19.0 eno0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None

[ 23.897789] usb 4-1: USB disconnect, device number 2

[ 23.897800] usb 4-1.2: USB disconnect, device number 3

[ 23.897804] usb 4-1.2.4: USB disconnect, device number 4

[ 23.926582] rfkill: input handler disabled

[ 24.584117] usb 4-1: new SuperSpeed USB device number 5 using xhci_hcd

[ 24.607572] usb 4-1: New USB device found, idVendor=045b, idProduct=0210, bcdDevice= 1.00

[ 24.607582] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 24.608444] hub 4-1:1.0: USB hub found

[ 24.608688] hub 4-1:1.0: 3 ports detected

[ 24.902010] usb 4-1.2: new SuperSpeed USB device number 6 using xhci_hcd

[ 24.929147] usb 4-1.2: New USB device found, idVendor=05e3, idProduct=0612, bcdDevice=92.12

[ 24.929156] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 24.929158] usb 4-1.2: Product: USB3.0 Hub

[ 24.929160] usb 4-1.2: Manufacturer: GenesysLogic

[ 24.929956] hub 4-1.2:1.0: USB hub found

[ 24.930277] hub 4-1.2:1.0: 4 ports detected

[ 25.226188] usb 4-1.2.4: new SuperSpeed USB device number 7 using xhci_hcd

[ 25.249645] usb 4-1.2.4: New USB device found, idVendor=05e3, idProduct=0748, bcdDevice=12.09

[ 25.249658] usb 4-1.2.4: New USB device strings: Mfr=3, Product=4, SerialNumber=2

[ 25.249661] usb 4-1.2.4: Product: USB Storage

[ 25.249664] usb 4-1.2.4: Manufacturer: Generic

[ 25.249666] usb 4-1.2.4: SerialNumber: 000000001209

[ 25.250571] usb-storage 4-1.2.4:1.0: USB Mass Storage device detected

[ 25.250914] scsi host6: usb-storage 4-1.2.4:1.0

[ 25.836005] vboxdrv: loading out-of-tree module taints kernel.

[ 25.836015] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel

[ 25.861509] vboxdrv: Found 8 processor cores/threads

[ 25.882083] vboxdrv: TSC mode is Invariant, tentative frequency 2294776998 Hz

[ 25.882091] vboxdrv: Successfully loaded version 7.0.12_Debian r159484 (interface 0x00330004)

[ 25.899761] VBoxNetFlt: Successfully started.

[ 25.913190] VBoxNetAdp: Successfully started.

[ 26.259164] scsi 6:0:0:0: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6

[ 26.259311] sd 6:0:0:0: Attached scsi generic sg3 type 0

[ 26.259974] sd 6:0:0:0: [sdd] Media removed, stopped polling

[ 26.260178] sd 6:0:0:0: [sdd] Attached SCSI removable disk

[ 26.261024] scsi 6:0:0:1: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6

[ 26.261171] sd 6:0:0:1: Attached scsi generic sg4 type 0

[ 26.262350] sd 6:0:0:1: [sde] Media removed, stopped polling

[ 26.262676] sd 6:0:0:1: [sde] Attached SCSI removable disk

[ 26.263903] scsi 6:0:0:2: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6

[ 26.264092] sd 6:0:0:2: Attached scsi generic sg5 type 0

[ 26.265201] sd 6:0:0:2: [sdf] Media removed, stopped polling

[ 26.265454] sd 6:0:0:2: [sdf] Attached SCSI removable disk

[ 26.266702] scsi 6:0:0:3: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6

[ 26.266873] sd 6:0:0:3: Attached scsi generic sg6 type 0

[ 26.268061] sd 6:0:0:3: [sdg] Media removed, stopped polling

[ 26.268278] sd 6:0:0:3: [sdg] Attached SCSI removable disk

[ 26.269364] scsi 6:0:0:4: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6

[ 26.269525] sd 6:0:0:4: Attached scsi generic sg7 type 0

[ 26.270914] sd 6:0:0:4: [sdh] Media removed, stopped polling

[ 26.271154] sd 6:0:0:4: [sdh] Attached SCSI removable disk

[ 26.280605] kauditd_printk_skb: 29 callbacks suppressed

[ 26.280609] audit: type=1400 audit(1699314550.630:41): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=3774 comm="apparmor_parser"

[ 26.340507] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.

[ 26.342444] Bridge firewalling registered

[ 26.447728] Initializing XFRM netlink socket

[ 28.791048] rfkill: input handler enabled

[ 32.006222] warning: `kded5' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211

[ 33.960021] wlp2s0: authenticate with 44:4e:6d:04:50:0f

[ 33.965711] wlp2s0: send auth to 44:4e:6d:04:50:0f (try 1/3)

[ 33.983240] logitech-hidpp-device 0003:046D:406F.000B: HID++ 4.5 device connected.

[ 34.080062] wlp2s0: authenticate with 44:4e:6d:04:50:0f

[ 34.080074] wlp2s0: send auth to 44:4e:6d:04:50:0f (try 1/3)

[ 34.114188] wlp2s0: authenticated

[ 34.117945] wlp2s0: associate with 44:4e:6d:04:50:0f (try 1/3)

[ 34.122658] wlp2s0: RX AssocResp from 44:4e:6d:04:50:0f (capab=0x1511 status=0 aid=1)

[ 34.134700] wlp2s0: associated

[ 34.230944] wlp2s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 44:4e:6d:04:50:0f

[ 49.042763] systemd-journald[534]: Time jumped backwards, rotating.

[ 52.425811] sd 1:0:0:0: [sda] Synchronizing SCSI cache

[ 52.426107] sd 1:0:0:0: [sda] Stopping disk

[ 53.354569] ata2.00: Entering standby power mode

[ 58.613885] usb 4-1: USB disconnect, device number 5

[ 58.613903] usb 4-1.2: USB disconnect, device number 6

[ 58.613908] usb 4-1.2.4: USB disconnect, device number 7

[ 59.202053] usb 4-1: new SuperSpeed USB device number 8 using xhci_hcd

[ 59.224617] usb 4-1: New USB device found, idVendor=045b, idProduct=0210, bcdDevice= 1.00

[ 59.224636] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 59.226078] hub 4-1:1.0: USB hub found

[ 59.226381] hub 4-1:1.0: 3 ports detected

[ 59.513997] usb 4-1.2: new SuperSpeed USB device number 9 using xhci_hcd

[ 59.537507] usb 4-1.2: New USB device found, idVendor=05e3, idProduct=0612, bcdDevice=92.12

[ 59.537522] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 59.537527] usb 4-1.2: Product: USB3.0 Hub

[ 59.537530] usb 4-1.2: Manufacturer: GenesysLogic

[ 59.538554] hub 4-1.2:1.0: USB hub found

[ 59.538913] hub 4-1.2:1.0: 4 ports detected

[ 59.826097] usb 4-1.2.4: new SuperSpeed USB device number 10 using xhci_hcd

[ 59.853220] usb 4-1.2.4: New USB device found, idVendor=05e3, idProduct=0748, bcdDevice=12.09

[ 59.853228] usb 4-1.2.4: New USB device strings: Mfr=3, Product=4, SerialNumber=2

[ 59.853230] usb 4-1.2.4: Product: USB Storage

[ 59.853232] usb 4-1.2.4: Manufacturer: Generic

[ 59.853234] usb 4-1.2.4: SerialNumber: 000000001209

[ 59.854021] usb-storage 4-1.2.4:1.0: USB Mass Storage device detected

[ 59.854304] scsi host6: usb-storage 4-1.2.4:1.0

[ 60.883638] scsi 6:0:0:0: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6

[ 60.884188] sd 6:0:0:0: Attached scsi generic sg3 type 0

[ 60.885143] sd 6:0:0:0: [sdd] Media removed, stopped polling

[ 60.885734] sd 6:0:0:0: [sdd] Attached SCSI removable disk

[ 60.886484] scsi 6:0:0:1: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6

[ 60.886933] sd 6:0:0:1: Attached scsi generic sg4 type 0

[ 60.887939] sd 6:0:0:1: [sde] Media removed, stopped polling

[ 60.888445] sd 6:0:0:1: [sde] Attached SCSI removable disk

[ 60.889266] scsi 6:0:0:2: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6

[ 60.889685] sd 6:0:0:2: Attached scsi generic sg5 type 0

[ 60.890754] sd 6:0:0:2: [sdf] Media removed, stopped polling

[ 60.891201] sd 6:0:0:2: [sdf] Attached SCSI removable disk

[ 60.892086] scsi 6:0:0:3: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6

[ 60.892540] sd 6:0:0:3: Attached scsi generic sg6 type 0

[ 60.893498] sd 6:0:0:3: [sdg] Media removed, stopped polling

[ 60.893973] sd 6:0:0:3: [sdg] Attached SCSI removable disk

[ 60.894910] scsi 6:0:0:4: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6

[ 60.895327] sd 6:0:0:4: Attached scsi generic sg7 type 0

[ 60.896576] sd 6:0:0:4: [sdh] Media removed, stopped polling

[ 60.897067] sd 6:0:0:4: [sdh] Attached SCSI removable disk