[ 0.000000] Linux version 6.5.0-4-amd64 (debian-kernel@lists.debian.org) (gcc-13 (Debian 13.2.0-6) 13.2.0, GNU ld (GNU Binutils for Debian) 2.41) #1 SMP PREEMPT_DYNAMIC Debian 6.5.10-1 (2023-11-03) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.5.0-4-amd64 root=/dev/mapper/TP--230t--vg-root ro iomem=relaxed scsi_mod.scan=sync [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ecb3fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ecb4000-0x000000007ee1bfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007ee1c000-0x000000007fe20fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007fe21000-0x000000008e9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004715fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: LENOVO 20OJKGY/20OJKGY, BIOS CBET4000 4.21-834-g49509473c753 11/06/2023 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2294.620 MHz processor [ 0.001508] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001512] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001519] last_pfn = 0x471600 max_arch_pfn = 0x400000000 [ 0.001525] MTRR map: 7 entries (3 fixed + 4 variable; max 23), built from 10 variable MTRRs [ 0.001528] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001832] x2apic: enabled by BIOS, switching to x2apic ops [ 0.001833] last_pfn = 0x7fe21 max_arch_pfn = 0x400000000 [ 0.015280] RAMDISK: [mem 0x2d39b000-0x329c4fff] [ 0.015286] ACPI: Early table checksum verification disabled [ 0.015290] ACPI: RSDP 0x00000000000F5FF0 000024 (v02 COREv4) [ 0.015296] ACPI: XSDT 0x000000007FE4D0E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20230628) [ 0.015303] ACPI: FACP 0x000000007FE50BB0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20230628) [ 0.015309] ACPI: DSDT 0x000000007FE4D280 003924 (v02 COREv4 COREBOOT 20110725 INTL 20230628) [ 0.015314] ACPI: FACS 0x000000007FE4D240 000040 [ 0.015317] ACPI: FACS 0x000000007FE4D240 000040 [ 0.015320] ACPI: SSDT 0x000000007FE50CD0 002E4B (v02 COREv4 COREBOOT 00000000 CORE 20230628) [ 0.015324] ACPI: MCFG 0x000000007FE53B20 00003C (v01 COREv4 COREBOOT 00000000 CORE 20230628) [ 0.015328] ACPI: TCPA 0x000000007FE53B60 000032 (v02 COREv4 COREBOOT 00000000 CORE 20230628) [ 0.015332] ACPI: APIC 0x000000007FE53BA0 00009E (v03 COREv4 COREBOOT 00000000 CORE 20230628) [ 0.015335] ACPI: DMAR 0x000000007FE53C40 0000C0 (v01 COREv4 COREBOOT 00000000 CORE 20230628) [ 0.015339] ACPI: HPET 0x000000007FE53D00 000038 (v01 COREv4 COREBOOT 00000000 CORE 20230628) [ 0.015342] ACPI: Reserving FACP table memory at [mem 0x7fe50bb0-0x7fe50cc3] [ 0.015344] ACPI: Reserving DSDT table memory at [mem 0x7fe4d280-0x7fe50ba3] [ 0.015345] ACPI: Reserving FACS table memory at [mem 0x7fe4d240-0x7fe4d27f] [ 0.015346] ACPI: Reserving FACS table memory at [mem 0x7fe4d240-0x7fe4d27f] [ 0.015348] ACPI: Reserving SSDT table memory at [mem 0x7fe50cd0-0x7fe53b1a] [ 0.015349] ACPI: Reserving MCFG table memory at [mem 0x7fe53b20-0x7fe53b5b] [ 0.015350] ACPI: Reserving TCPA table memory at [mem 0x7fe53b60-0x7fe53b91] [ 0.015351] ACPI: Reserving APIC table memory at [mem 0x7fe53ba0-0x7fe53c3d] [ 0.015352] ACPI: Reserving DMAR table memory at [mem 0x7fe53c40-0x7fe53cff] [ 0.015353] ACPI: Reserving HPET table memory at [mem 0x7fe53d00-0x7fe53d37] [ 0.015364] Setting APIC routing to cluster x2apic. [ 0.015423] No NUMA configuration found [ 0.015424] Faking a node at [mem 0x0000000000000000-0x00000004715fffff] [ 0.015435] NODE_DATA(0) allocated [mem 0x4715c8000-0x4715f2fff] [ 0.015766] Zone ranges: [ 0.015768] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.015770] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.015772] Normal [mem 0x0000000100000000-0x00000004715fffff] [ 0.015774] Device empty [ 0.015775] Movable zone start for each node [ 0.015779] Early memory node ranges [ 0.015779] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.015781] node 0: [mem 0x0000000000100000-0x000000007ecb3fff] [ 0.015783] node 0: [mem 0x000000007ee1c000-0x000000007fe20fff] [ 0.015784] node 0: [mem 0x0000000100000000-0x00000004715fffff] [ 0.015787] Initmem setup node 0 [mem 0x0000000000001000-0x00000004715fffff] [ 0.015793] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.015819] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.019525] On node 0, zone DMA32: 360 pages in unavailable ranges [ 0.019876] On node 0, zone Normal: 479 pages in unavailable ranges [ 0.020180] On node 0, zone Normal: 27136 pages in unavailable ranges [ 0.020188] Reserving Intel graphics memory at [mem 0x80a00000-0x8e9fffff] [ 0.020393] ACPI: PM-Timer IO Port: 0x508 [ 0.020402] ACPI: X2APIC_NMI (uid[0xffffffff] high edge lint[0x1]) [ 0.020405] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.020417] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.020420] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.020423] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.020428] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.020429] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.020435] TSC deadline timer available [ 0.020436] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.020450] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.020452] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.020454] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.020455] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.020456] PM: hibernation: Registered nosave memory: [mem 0x7ecb4000-0x7ee1bfff] [ 0.020458] PM: hibernation: Registered nosave memory: [mem 0x7fe21000-0x8e9fffff] [ 0.020459] PM: hibernation: Registered nosave memory: [mem 0x8ea00000-0xefffffff] [ 0.020460] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] [ 0.020461] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xfed3ffff] [ 0.020462] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff] [ 0.020463] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] [ 0.020464] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfed91fff] [ 0.020465] PM: hibernation: Registered nosave memory: [mem 0xfed92000-0xffffffff] [ 0.020467] [mem 0x8ea00000-0xefffffff] available for PCI devices [ 0.020469] Booting paravirtualized kernel on bare hardware [ 0.020471] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.026421] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.026883] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144 [ 0.026890] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152 [ 0.026893] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.026918] Kernel command line: BOOT_IMAGE=/vmlinuz-6.5.0-4-amd64 root=/dev/mapper/TP--230t--vg-root ro iomem=relaxed scsi_mod.scan=sync [ 0.026990] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.5.0-4-amd64", will be passed to user space. [ 0.027014] random: crng init done [ 0.028860] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.029844] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.029993] Fallback order for Node 0: 0 [ 0.029998] Built 1 zonelists, mobility grouping on. Total pages: 4068718 [ 0.030000] Policy zone: Normal [ 0.030009] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.030018] software IO TLB: area num 8. [ 0.054678] Memory: 2069816K/16533852K available (14336K kernel code, 2346K rwdata, 10340K rodata, 3920K init, 18144K bss, 497576K reserved, 0K cma-reserved) [ 0.055011] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.055028] Kernel/User page tables isolation: enabled [ 0.055070] ftrace: allocating 42178 entries in 165 pages [ 0.063935] ftrace: allocated 165 pages with 4 groups [ 0.064706] Dynamic Preempt: voluntary [ 0.064751] rcu: Preemptible hierarchical RCU implementation. [ 0.064752] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.064754] Trampoline variant of Tasks RCU enabled. [ 0.064755] Rude variant of Tasks RCU enabled. [ 0.064755] Tracing variant of Tasks RCU enabled. [ 0.064756] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.064757] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.068422] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.068631] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.068701] spurious 8259A interrupt: IRQ7. [ 0.070228] Console: colour VGA+ 80x25 [ 0.070231] printk: console [tty0] enabled [ 0.078115] ACPI: Core revision 20230331 [ 0.078245] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.078337] APIC: Switch to symmetric I/O mode setup [ 0.078399] DMAR: Host address width 36 [ 0.078456] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.078520] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.078598] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.078661] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.078737] DMAR: RMRR base: 0x00000080800000 end: 0x0000008e9fffff [ 0.078801] DMAR-IR: IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1 [ 0.078863] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.078925] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.079548] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.080089] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.098338] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x21135b1969c, max_idle_ns: 440795304650 ns [ 0.098424] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.24 BogoMIPS (lpj=9178480) [ 0.098531] CPU0: Thermal monitoring enabled (TM1) [ 0.098617] process: using mwait in idle threads [ 0.098681] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.098743] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.098807] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.098885] Spectre V2 : Mitigation: Retpolines [ 0.098944] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.099022] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.099086] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.099151] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.099227] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.099289] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.099368] MDS: Mitigation: Clear CPU buffers [ 0.099427] MMIO Stale Data: Unknown: No mitigations [ 0.099912] SRBDS: Vulnerable: No microcode [ 0.099975] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.100052] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.100114] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.100178] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.100241] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.121661] Freeing SMP alternatives memory: 36K [ 0.121727] pid_max: default: 32768 minimum: 301 [ 0.121842] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,integrity [ 0.121937] landlock: Up and running. [ 0.121997] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.122080] AppArmor: AppArmor initialized [ 0.122140] TOMOYO Linux initialized [ 0.122200] LSM support for eBPF active [ 0.122303] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.122396] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.122788] smpboot: CPU0: Intel(R) Core(TM) i7-3615QE CPU @ 2.30GHz (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.123046] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.123128] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.123221] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.123314] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.123411] ... version: 3 [ 0.123471] ... bit width: 48 [ 0.123529] ... generic registers: 4 [ 0.123588] ... value mask: 0000ffffffffffff [ 0.123649] ... max period: 00007fffffffffff [ 0.123709] ... fixed-purpose events: 3 [ 0.123769] ... event mask: 000000070000000f [ 0.124003] signal: max sigframe size: 1776 [ 0.124083] Estimated ratio of average max frequency by base frequency (times 1024): 1380 [ 0.124190] rcu: Hierarchical SRCU implementation. [ 0.124251] rcu: Max phase no-delay instances is 1000. [ 0.125066] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.125231] smp: Bringing up secondary CPUs ... [ 0.125429] smpboot: x86: Booting SMP configuration: [ 0.125489] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.144423] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.150464] smp: Brought up 1 node, 8 CPUs [ 0.150500] smpboot: Max logical packages: 1 [ 0.150560] smpboot: Total of 8 processors activated (36713.92 BogoMIPS) [ 0.172537] node 0 deferred pages initialised in 24ms [ 0.175825] devtmpfs: initialized [ 0.175825] x86/mm: Memory block size: 128MB [ 0.178901] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.178901] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.178901] pinctrl core: initialized pinctrl subsystem [ 0.179419] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.179751] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.179970] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.180200] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.180313] audit: initializing netlink subsys (disabled) [ 0.180393] audit: type=2000 audit(1699318124.100:1): state=initialized audit_enabled=0 res=1 [ 0.180393] thermal_sys: Registered thermal governor 'fair_share' [ 0.180393] thermal_sys: Registered thermal governor 'bang_bang' [ 0.180393] thermal_sys: Registered thermal governor 'step_wise' [ 0.180393] thermal_sys: Registered thermal governor 'user_space' [ 0.180393] thermal_sys: Registered thermal governor 'power_allocator' [ 0.180393] cpuidle: using governor ladder [ 0.180393] cpuidle: using governor menu [ 0.180393] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.180393] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.180393] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved as E820 entry [ 0.180393] PCI: Using configuration type 1 for base access [ 0.180393] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.182513] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.182598] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.182598] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.182598] ACPI: Added _OSI(Module Device) [ 0.182598] ACPI: Added _OSI(Processor Device) [ 0.182649] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.182708] ACPI: Added _OSI(Processor Aggregator Device) [ 0.185540] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.186948] ACPI: EC: EC started [ 0.186948] ACPI: EC: interrupt blocked [ 0.187187] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.187248] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions [ 0.187325] ACPI: Interpreter enabled [ 0.187399] ACPI: PM: (supports S0 S1 S3 S4 S5) [ 0.187459] ACPI: Using IOAPIC for interrupt routing [ 0.187539] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.187617] PCI: Ignoring E820 reservations for host bridge windows [ 0.187818] ACPI: Enabled 1 GPEs in block 00 to 3F [ 0.193212] ACPI: \_TZ_.THM0.FPWR: New power resource [ 0.193578] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.193648] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.193756] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.193843] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.194005] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff]) [ 0.194093] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d05ff]) [ 0.194426] PCI host bridge to bus 0000:00 [ 0.194486] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.194550] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.194614] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000cbfff window] [ 0.194692] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000fffff window] [ 0.194768] pci_bus 0000:00: root bus resource [mem 0x8ea00000-0xefffffff window] [ 0.194844] pci_bus 0000:00: root bus resource [mem 0x471600000-0xfffffffff window] [ 0.194918] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.194994] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.195071] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 0.195239] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 [ 0.195311] pci 0000:00:02.0: reg 0x10: [mem 0xfdc00000-0xfdffffff 64bit] [ 0.195381] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.195460] pci 0000:00:02.0: reg 0x20: [io 0xefc0-0xefff] [ 0.195534] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.195714] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.195797] pci 0000:00:14.0: reg 0x10: [mem 0xfd1d0000-0xfd1dffff 64bit] [ 0.195931] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.196080] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.196157] pci 0000:00:19.0: reg 0x10: [mem 0xfd1e0000-0xfd1fffff] [ 0.196227] pci 0000:00:19.0: reg 0x14: [mem 0xfd1cb000-0xfd1cbfff] [ 0.196296] pci 0000:00:19.0: reg 0x18: [io 0xefa0-0xefbf] [ 0.196419] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.196546] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.196624] pci 0000:00:1a.0: reg 0x10: [mem 0xfd1c8000-0xfd1c83ff] [ 0.196771] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.196934] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.197013] pci 0000:00:1b.0: reg 0x10: [mem 0xfd1cc000-0xfd1cffff 64bit] [ 0.197157] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.197336] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.197552] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.197650] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.197713] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.197886] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.198101] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.198198] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.198261] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.198438] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 [ 0.198656] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.198751] pci 0000:00:1c.2: Enabling MPC IRBNCE [ 0.198812] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled [ 0.198985] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.199062] pci 0000:00:1d.0: reg 0x10: [mem 0xfd1c7000-0xfd1c73ff] [ 0.199211] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.199365] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 [ 0.199639] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.199714] pci 0000:00:1f.2: reg 0x10: [io 0xef78-0xef7f] [ 0.199782] pci 0000:00:1f.2: reg 0x14: [io 0xef6c-0xef6f] [ 0.199851] pci 0000:00:1f.2: reg 0x18: [io 0xef70-0xef77] [ 0.199920] pci 0000:00:1f.2: reg 0x1c: [io 0xef68-0xef6b] [ 0.199989] pci 0000:00:1f.2: reg 0x20: [io 0xef80-0xef9f] [ 0.200058] pci 0000:00:1f.2: reg 0x24: [mem 0xfd1c9000-0xfd1c97ff] [ 0.200162] pci 0000:00:1f.2: PME# supported from D3hot [ 0.200303] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.200382] pci 0000:00:1f.3: reg 0x10: [mem 0xfd1c6000-0xfd1c60ff 64bit] [ 0.200466] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] [ 0.200617] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000 [ 0.200699] pci 0000:00:1f.6: reg 0x10: [mem 0xfd1ca000-0xfd1cafff 64bit] [ 0.200998] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. [ 0.201492] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501 [ 0.201605] pci 0000:01:00.0: reg 0x10: [mem 0xfd300000-0xfd3000ff] [ 0.201992] pci 0000:01:00.0: supports D1 D2 [ 0.202053] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.202401] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.202431] pci 0000:00:1c.0: bridge window [mem 0xfd300000-0xfd3fffff] [ 0.202676] pci 0000:02:00.0: [8086:2725] type 00 class 0x028000 [ 0.202839] pci 0000:02:00.0: reg 0x10: [mem 0xfd200000-0xfd203fff 64bit] [ 0.203434] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.204075] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.204144] pci 0000:00:1c.1: bridge window [mem 0xfd200000-0xfd2fffff] [ 0.204291] pci 0000:00:1c.2: PCI bridge to [bus 03-0b] [ 0.204356] pci 0000:00:1c.2: bridge window [io 0xf000-0xffff] [ 0.204422] pci 0000:00:1c.2: bridge window [mem 0xfd400000-0xfdbfffff] [ 0.204493] pci 0000:00:1c.2: bridge window [mem 0xff0000000-0xfffffffff 64bit pref] [ 0.204759] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.204865] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.204968] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.205066] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.205167] ACPI: PCI: Interrupt link LNKE configured for IRQ 11 [ 0.205268] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.205366] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.205465] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.206579] ACPI: EC: interrupt unblocked [ 0.206640] ACPI: EC: event unblocked [ 0.206702] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.206762] ACPI: EC: GPE=0x11 [ 0.206821] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC initialization complete [ 0.206885] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events [ 0.207043] iommu: Default domain type: Translated [ 0.207043] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.207043] pps_core: LinuxPPS API ver. 1 registered [ 0.207043] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.207043] PTP clock support registered [ 0.207043] EDAC MC: Ver: 3.0.0 [ 0.207043] NetLabel: Initializing [ 0.207043] NetLabel: domain hash size = 128 [ 0.207043] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.207043] NetLabel: unlabeled traffic allowed by default [ 0.207043] PCI: Using ACPI for IRQ routing [ 0.208778] PCI: pci_cache_line_size set to 64 bytes [ 0.208782] pci 0000:00:1c.0: can't claim BAR 14 [mem 0xfd300000-0xfd3fffff]: no compatible bridge window [ 0.208863] pci 0000:00:1c.1: can't claim BAR 14 [mem 0xfd200000-0xfd2fffff]: no compatible bridge window [ 0.208942] pci 0000:00:1c.2: can't claim BAR 14 [mem 0xfd400000-0xfdbfffff]: no compatible bridge window [ 0.209022] pci 0000:00:02.0: can't claim BAR 0 [mem 0xfdc00000-0xfdffffff 64bit]: no compatible bridge window [ 0.209104] pci 0000:00:14.0: can't claim BAR 0 [mem 0xfd1d0000-0xfd1dffff 64bit]: no compatible bridge window [ 0.210426] pci 0000:00:19.0: can't claim BAR 0 [mem 0xfd1e0000-0xfd1fffff]: no compatible bridge window [ 0.210501] pci 0000:00:19.0: can't claim BAR 1 [mem 0xfd1cb000-0xfd1cbfff]: no compatible bridge window [ 0.210581] pci 0000:00:1a.0: can't claim BAR 0 [mem 0xfd1c8000-0xfd1c83ff]: no compatible bridge window [ 0.210662] pci 0000:00:1b.0: can't claim BAR 0 [mem 0xfd1cc000-0xfd1cffff 64bit]: no compatible bridge window [ 0.210750] pci 0000:01:00.0: can't claim BAR 0 [mem 0xfd300000-0xfd3000ff]: no compatible bridge window [ 0.210841] pci 0000:02:00.0: can't claim BAR 0 [mem 0xfd200000-0xfd203fff 64bit]: no compatible bridge window [ 0.210924] pci 0000:00:1d.0: can't claim BAR 0 [mem 0xfd1c7000-0xfd1c73ff]: no compatible bridge window [ 0.211007] pci 0000:00:1f.2: can't claim BAR 5 [mem 0xfd1c9000-0xfd1c97ff]: no compatible bridge window [ 0.211088] pci 0000:00:1f.3: can't claim BAR 0 [mem 0xfd1c6000-0xfd1c60ff 64bit]: no compatible bridge window [ 0.211169] pci 0000:00:1f.6: can't claim BAR 0 [mem 0xfd1ca000-0xfd1cafff 64bit]: no compatible bridge window [ 0.211281] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.211284] e820: reserve RAM buffer [mem 0x7ecb4000-0x7fffffff] [ 0.211285] e820: reserve RAM buffer [mem 0x7fe21000-0x7fffffff] [ 0.211287] e820: reserve RAM buffer [mem 0x471600000-0x473ffffff] [ 0.211308] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.211308] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.211308] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.211308] vgaarb: loaded [ 0.212222] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.212296] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.214471] clocksource: Switched to clocksource tsc-early [ 0.214691] VFS: Disk quotas dquot_6.6.0 [ 0.214763] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.214969] AppArmor: AppArmor Filesystem Enabled [ 0.215050] pnp: PnP ACPI init [ 0.215175] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.215379] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.215445] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.215508] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.215572] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.215636] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.215701] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.215766] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.215830] system 00:01: [mem 0x20000000-0x201fffff] could not be reserved [ 0.215891] system 00:01: [mem 0x40000000-0x401fffff] could not be reserved [ 0.216327] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.216440] system 00:03: [io 0x0500-0x057f] has been reserved [ 0.216504] system 00:03: [io 0x0480-0x04bf] has been reserved [ 0.216702] pnp: PnP ACPI: found 8 devices [ 0.222818] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.222982] NET: Registered PF_INET protocol family [ 0.223218] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.227261] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.227374] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.227521] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.227858] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.228254] TCP: Hash tables configured (established 131072 bind 65536) [ 0.228418] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 0.228551] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.228664] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.228813] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.228880] NET: Registered PF_XDP protocol family [ 0.228949] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03-0b] add_size 200000 add_align 100000 [ 0.229043] pci 0000:00:02.0: BAR 0: assigned [mem 0x471800000-0x471bfffff 64bit] [ 0.229124] pci 0000:00:1c.0: BAR 14: assigned [mem 0x8ea00000-0x8eafffff] [ 0.229189] pci 0000:00:1c.1: BAR 14: assigned [mem 0x8eb00000-0x8ebfffff] [ 0.229254] pci 0000:00:1c.2: BAR 14: assigned [mem 0x8ec00000-0x8edfffff] [ 0.229320] pci 0000:00:19.0: BAR 0: assigned [mem 0x8ee00000-0x8ee1ffff] [ 0.229388] pci 0000:00:14.0: BAR 0: assigned [mem 0x471600000-0x47160ffff 64bit] [ 0.229473] pci 0000:00:1b.0: BAR 0: assigned [mem 0x471610000-0x471613fff 64bit] [ 0.229556] pci 0000:00:19.0: BAR 1: assigned [mem 0x8ee20000-0x8ee20fff] [ 0.229623] pci 0000:00:1f.6: BAR 0: assigned [mem 0x471614000-0x471614fff 64bit] [ 0.229708] pci 0000:00:1f.2: BAR 5: assigned [mem 0x8ee21000-0x8ee217ff] [ 0.229775] pci 0000:00:1a.0: BAR 0: assigned [mem 0x8ee21800-0x8ee21bff] [ 0.229841] pci 0000:00:1d.0: BAR 0: assigned [mem 0x8ee21c00-0x8ee21fff] [ 0.229910] pci 0000:00:1f.3: BAR 0: assigned [mem 0x471615000-0x4716150ff 64bit] [ 0.229996] pci 0000:01:00.0: BAR 0: assigned [mem 0x8ea00000-0x8ea000ff] [ 0.230068] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.230136] pci 0000:00:1c.0: bridge window [mem 0x8ea00000-0x8eafffff] [ 0.230210] pci 0000:02:00.0: BAR 0: assigned [mem 0x8eb00000-0x8eb03fff 64bit] [ 0.230331] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.230397] pci 0000:00:1c.1: bridge window [mem 0x8eb00000-0x8ebfffff] [ 0.230483] pci 0000:00:1c.2: PCI bridge to [bus 03-0b] [ 0.230546] pci 0000:00:1c.2: bridge window [io 0xf000-0xffff] [ 0.230614] pci 0000:00:1c.2: bridge window [mem 0x8ec00000-0x8edfffff] [ 0.230680] pci 0000:00:1c.2: bridge window [mem 0xff0000000-0xfffffffff 64bit pref] [ 0.230764] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.230828] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.230890] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000cbfff window] [ 0.230953] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000fffff window] [ 0.231016] pci_bus 0000:00: resource 8 [mem 0x8ea00000-0xefffffff window] [ 0.231080] pci_bus 0000:00: resource 9 [mem 0x471600000-0xfffffffff window] [ 0.231145] pci_bus 0000:00: resource 10 [mem 0xfed40000-0xfed44fff window] [ 0.231209] pci_bus 0000:01: resource 1 [mem 0x8ea00000-0x8eafffff] [ 0.231273] pci_bus 0000:02: resource 1 [mem 0x8eb00000-0x8ebfffff] [ 0.231336] pci_bus 0000:03: resource 0 [io 0xf000-0xffff] [ 0.231399] pci_bus 0000:03: resource 1 [mem 0x8ec00000-0x8edfffff] [ 0.231461] pci_bus 0000:03: resource 2 [mem 0xff0000000-0xfffffffff 64bit pref] [ 0.232257] PCI: CLS 64 bytes, default 64 [ 0.232334] DMAR: No ATSR found [ 0.232389] Trying to unpack rootfs image as initramfs... [ 0.232391] DMAR: No SATC found [ 0.232393] DMAR: IOMMU feature pgsel_inv inconsistent [ 0.232513] DMAR: IOMMU feature pass_through inconsistent [ 0.232575] DMAR: dmar0: Using Queued invalidation [ 0.232702] DMAR: dmar1: Using Queued invalidation [ 0.314709] pci 0000:00:02.0: Adding to iommu group 0 [ 0.314828] pci 0000:00:00.0: Adding to iommu group 1 [ 0.314902] pci 0000:00:14.0: Adding to iommu group 2 [ 0.314974] pci 0000:00:19.0: Adding to iommu group 3 [ 0.315046] pci 0000:00:1a.0: Adding to iommu group 4 [ 0.315119] pci 0000:00:1b.0: Adding to iommu group 5 [ 0.315193] pci 0000:00:1c.0: Adding to iommu group 6 [ 0.315685] pci 0000:00:1c.1: Adding to iommu group 7 [ 0.315758] pci 0000:00:1c.2: Adding to iommu group 8 [ 0.315830] pci 0000:00:1d.0: Adding to iommu group 9 [ 0.315916] pci 0000:00:1f.0: Adding to iommu group 10 [ 0.315989] pci 0000:00:1f.2: Adding to iommu group 10 [ 0.316059] pci 0000:00:1f.3: Adding to iommu group 10 [ 0.316130] pci 0000:00:1f.6: Adding to iommu group 10 [ 0.316202] pci 0000:01:00.0: Adding to iommu group 11 [ 0.316274] pci 0000:02:00.0: Adding to iommu group 12 [ 0.317462] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 0.317529] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.317593] software IO TLB: mapped [mem 0x000000007acb4000-0x000000007ecb4000] (64MB) [ 0.318154] Initialise system trusted keyrings [ 0.318227] Key type blacklist registered [ 0.318349] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.318448] zbud: loaded [ 0.318711] integrity: Platform Keyring initialized [ 0.318777] integrity: Machine keyring initialized [ 0.318839] Key type asymmetric registered [ 0.318900] Asymmetric key parser 'x509' registered [ 0.992006] Freeing initrd memory: 88232K [ 0.998160] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.998288] io scheduler mq-deadline registered [ 0.999510] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26 [ 0.999820] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27 [ 1.000125] pcieport 0000:00:1c.2: PME: Signaling with IRQ 28 [ 1.000224] pcieport 0000:00:1c.2: pciehp: Slot #2 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 1.000471] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.003071] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.003139] ACPI: thermal: Thermal Zone [THM0] (67 C) [ 1.004162] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.004229] ACPI: thermal: Thermal Zone [THM1] (27 C) [ 1.004463] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.005297] Linux agpgart interface v0.103 [ 1.010460] tpm_tis 00:07: 1.2 TPM (device-id 0x0, rev-id 78) [ 1.138644] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 1.139519] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.142853] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.142921] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.143105] mousedev: PS/2 mouse device common for all mice [ 1.143202] rtc_cmos 00:04: RTC can wake from S4 [ 1.143572] rtc_cmos 00:04: registered as rtc0 [ 1.143676] rtc_cmos 00:04: setting system clock to 2023-11-07T00:48:45 UTC (1699318125) [ 1.143796] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram [ 1.144148] intel_pstate: Intel P-state driver initializing [ 1.144864] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.145361] ledtrig-cpu: registered to indicate activity on CPUs [ 1.159466] NET: Registered PF_INET6 protocol family [ 1.167283] Segment Routing with IPv6 [ 1.167361] In-situ OAM (IOAM) with IPv6 [ 1.167453] mip6: Mobile IPv6 [ 1.167517] NET: Registered PF_PACKET protocol family [ 1.167760] mpls_gso: MPLS GSO support [ 1.169053] microcode: Microcode Update Driver: v2.2. [ 1.169060] IPI shorthand broadcast: enabled [ 1.170528] sched_clock: Marking stable (1160002723, 9757306)->(1172156955, -2396926) [ 1.170959] registered taskstats version 1 [ 1.171113] Loading compiled-in X.509 certificates [ 1.196306] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 1.196441] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 1.199873] Key type .fscrypt registered [ 1.199956] Key type fscrypt-provisioning registered [ 1.206852] Key type encrypted registered [ 1.206930] AppArmor: AppArmor sha1 policy hashing enabled [ 1.206999] ima: Allocated hash algorithm: sha256 [ 1.305866] ima: No architecture policies found [ 1.305937] evm: Initialising EVM extended attributes: [ 1.305995] evm: security.selinux [ 1.306050] evm: security.SMACK64 (disabled) [ 1.306107] evm: security.SMACK64EXEC (disabled) [ 1.306165] evm: security.SMACK64TRANSMUTE (disabled) [ 1.306223] evm: security.SMACK64MMAP (disabled) [ 1.306280] evm: security.apparmor [ 1.306334] evm: security.ima [ 1.306389] evm: security.capability [ 1.306445] evm: HMAC attrs: 0x1 [ 1.329781] tsc: Refined TSC clocksource calibration: 2294.787 MHz [ 1.329868] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113f8b171d, max_idle_ns: 440795241185 ns [ 1.329994] clocksource: Switched to clocksource tsc [ 1.413347] RAS: Correctable Errors collector initialized. [ 1.413573] clk: Disabling unused clocks [ 1.416051] Freeing unused decrypted memory: 2036K [ 1.417142] Freeing unused kernel image (initmem) memory: 3920K [ 1.425817] Write protecting the kernel read-only data: 26624k [ 1.427021] Freeing unused kernel image (rodata/data gap) memory: 1948K [ 1.512299] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.512363] x86/mm: Checking user space page tables [ 1.554722] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.554785] Run /init as init process [ 1.554841] with arguments: [ 1.554842] /init [ 1.554843] with environment: [ 1.554844] HOME=/ [ 1.554844] TERM=linux [ 1.554845] BOOT_IMAGE=/vmlinuz-6.5.0-4-amd64 [ 1.761557] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input2 [ 1.779316] ACPI: button: Sleep Button [SLPB] [ 1.779470] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20230331/utaddress-204) [ 1.779490] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input3 [ 1.779646] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 1.779811] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20230331/utaddress-204) [ 1.779924] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 1.779986] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20230331/utaddress-204) [ 1.780078] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 1.780149] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20230331/utaddress-204) [ 1.780305] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 1.780370] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.787044] ACPI: battery: Slot [BAT0] (battery present) [ 1.787493] ACPI: battery: Slot [BAT1] (battery absent) [ 1.789501] ACPI: button: Lid Switch [LID] [ 1.797209] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.798028] i2c i2c-0: 2/2 memory slots populated (from DMI) [ 1.798932] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 1.799330] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 1.806013] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 1.809993] ACPI: button: Power Button [PWRF] [ 1.812762] ACPI: bus type USB registered [ 1.813620] sdhci: Secure Digital Host Controller Interface driver [ 1.813686] sdhci: Copyright(c) Pierre Ossman [ 1.813832] usbcore: registered new interface driver usbfs [ 1.815179] e1000e: Intel(R) PRO/1000 Network Driver [ 1.815243] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.815766] usbcore: registered new interface driver hub [ 1.816444] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.816765] usbcore: registered new device driver usb [ 1.818262] SCSI subsystem initialized [ 1.841207] cryptd: max_cpu_qlen set to 1000 [ 1.841572] ACPI: bus type drm_connector registered [ 1.848197] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.848272] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.848357] ehci-pci 0000:00:1d.0: debug port 2 [ 1.849060] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4) [ 1.849360] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes [ 1.849657] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA [ 1.852667] ehci-pci 0000:00:1d.0: irq 18, io mem 0x8ee21c00 [ 1.854115] AVX version of gcm_enc/dec engaged. [ 1.854216] AES CTR mode by8 optimization enabled [ 1.865782] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.865949] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 1.865960] libata version 3.00 loaded. [ 1.866027] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.866099] usb usb1: Product: EHCI Host Controller [ 1.866158] usb usb1: Manufacturer: Linux 6.5.0-4-amd64 ehci_hcd [ 1.866218] usb usb1: SerialNumber: 0000:00:1d.0 [ 1.866566] hub 1-0:1.0: USB hub found [ 1.866632] hub 1-0:1.0: 3 ports detected [ 1.866813] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.866881] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 1.866964] ehci-pci 0000:00:1a.0: debug port 2 [ 1.870969] ehci-pci 0000:00:1a.0: irq 19, io mem 0x8ee21800 [ 1.889793] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.890218] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 1.890294] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.890366] usb usb2: Product: EHCI Host Controller [ 1.890837] usb usb2: Manufacturer: Linux 6.5.0-4-amd64 ehci_hcd [ 1.890897] usb usb2: SerialNumber: 0000:00:1a.0 [ 1.891168] hub 2-0:1.0: USB hub found [ 1.891265] hub 2-0:1.0: 3 ports detected [ 1.893710] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.893794] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.894984] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930 [ 1.895249] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.895312] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.895390] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.895547] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 1.895624] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.895695] usb usb3: Product: xHCI Host Controller [ 1.895754] usb usb3: Manufacturer: Linux 6.5.0-4-amd64 xhci-hcd [ 1.895814] usb usb3: SerialNumber: 0000:00:14.0 [ 1.896018] hub 3-0:1.0: USB hub found [ 1.896089] hub 3-0:1.0: 4 ports detected [ 1.896345] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 [ 1.896421] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.896493] usb usb4: Product: xHCI Host Controller [ 1.896551] usb usb4: Manufacturer: Linux 6.5.0-4-amd64 xhci-hcd [ 1.896614] usb usb4: SerialNumber: 0000:00:14.0 [ 1.896872] hub 4-0:1.0: USB hub found [ 1.896947] hub 4-0:1.0: 4 ports detected [ 1.899040] ahci 0000:00:1f.2: version 3.0 [ 1.899258] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.909413] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode [ 1.909498] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst [ 1.910361] scsi host0: ahci [ 1.910611] scsi host1: ahci [ 1.910835] scsi host2: ahci [ 1.911059] scsi host3: ahci [ 1.911249] scsi host4: ahci [ 1.911456] scsi host5: ahci [ 1.911593] ata1: SATA max UDMA/133 abar m2048@0x8ee21000 port 0x8ee21100 irq 31 [ 1.911670] ata2: SATA max UDMA/133 abar m2048@0x8ee21000 port 0x8ee21180 irq 31 [ 1.911743] ata3: SATA max UDMA/133 abar m2048@0x8ee21000 port 0x8ee21200 irq 31 [ 1.911817] ata4: DUMMY [ 1.911874] ata5: DUMMY [ 1.911931] ata6: DUMMY [ 1.939827] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 2.037684] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 54:ee:75:13:62:87 [ 2.037807] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.037931] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF [ 2.121809] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.145797] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.149800] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 2.224577] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.225487] ata1.00: supports DRM functions and may not be fully accessible [ 2.225571] ata1.00: ATA-10: KINGSTON SKC6001024G, S4500109, max UDMA/133 [ 2.225714] ata1.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.227016] ata1.00: Features: Trust Dev-Sleep [ 2.227377] ata1.00: supports DRM functions and may not be fully accessible [ 2.228428] ata1.00: configured for UDMA/133 [ 2.239057] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC6001 0109 PQ: 0 ANSI: 5 [ 2.278344] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 2.278447] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.279086] hub 1-1:1.0: USB hub found [ 2.279343] hub 1-1:1.0: 8 ports detected [ 2.298454] usb 3-1: New USB device found, idVendor=045b, idProduct=0209, bcdDevice= 1.00 [ 2.298587] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.299490] hub 3-1:1.0: USB hub found [ 2.299652] hub 3-1:1.0: 3 ports detected [ 2.306189] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 2.306289] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.306769] hub 2-1:1.0: USB hub found [ 2.306939] hub 2-1:1.0: 6 ports detected [ 2.425970] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 2.448136] usb 4-1: New USB device found, idVendor=045b, idProduct=0210, bcdDevice= 1.00 [ 2.448240] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.449493] hub 4-1:1.0: USB hub found [ 2.449818] hub 4-1:1.0: 3 ports detected [ 2.552296] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.565802] usb 1-1.5: new full-speed USB device number 3 using ehci-pci [ 2.573804] usb 3-3: new high-speed USB device number 3 using xhci_hcd [ 2.584240] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133 [ 2.593797] usb 2-1.3: new full-speed USB device number 3 using ehci-pci [ 2.613279] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.676716] usb 1-1.5: New USB device found, idVendor=056a, idProduct=00e6, bcdDevice= 1.39 [ 2.676822] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.676914] usb 1-1.5: Product: ISD-V4 [ 2.676983] usb 1-1.5: Manufacturer: Tablet [ 2.696054] hid: raw HID events driver (C) Jiri Kosina [ 2.699912] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062] [ 2.703519] usb 2-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01 [ 2.703623] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.703714] usb 2-1.3: Product: Biometric Coprocessor [ 2.703785] usb 2-1.3: Manufacturer: Auth [ 2.722225] usb 3-3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= 0.00 [ 2.722329] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.723082] hub 3-3:1.0: USB hub found [ 2.723213] hub 3-3:1.0: 4 ports detected [ 2.736348] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..] [ 2.761800] usb 1-1.6: new full-speed USB device number 4 using ehci-pci [ 2.781801] usb 2-1.4: new full-speed USB device number 4 using ehci-pci [ 2.801803] usb 3-1.2: new high-speed USB device number 4 using xhci_hcd [ 2.809807] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905 [ 2.809932] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 2.857299] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 2.876085] usb 1-1.6: New USB device found, idVendor=08e6, idProduct=34ec, bcdDevice= 1.00 [ 2.876188] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.876280] usb 1-1.6: Product: GemPC Express [ 2.876350] usb 1-1.6: Manufacturer: Gemplus [ 2.893719] usb 2-1.4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.11 [ 2.893838] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.893930] usb 2-1.4: Product: USB Receiver [ 2.894000] usb 2-1.4: Manufacturer: Logitech [ 2.907091] usb 3-1.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.12 [ 2.907204] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.907301] usb 3-1.2: Product: USB2.0 Hub [ 2.907372] usb 3-1.2: Manufacturer: GenesysLogic [ 2.908348] hub 3-1.2:1.0: USB hub found [ 2.908889] hub 3-1.2:1.0: 4 ports detected [ 2.923173] usbcore: registered new interface driver usbhid [ 2.923256] usbhid: USB HID core driver [ 2.960711] ata2.00: configured for UDMA/133 [ 2.970263] scsi 1:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5 [ 2.977798] usb 2-1.5: new full-speed USB device number 5 using ehci-pci [ 2.982054] usb 4-1.2: new SuperSpeed USB device number 3 using xhci_hcd [ 3.005437] usb 4-1.2: New USB device found, idVendor=05e3, idProduct=0612, bcdDevice=92.12 [ 3.005541] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.005633] usb 4-1.2: Product: USB3.0 Hub [ 3.005707] usb 4-1.2: Manufacturer: GenesysLogic [ 3.006897] hub 4-1.2:1.0: USB hub found [ 3.007347] hub 4-1.2:1.0: 4 ports detected [ 3.085803] usb 3-1.3: new full-speed USB device number 5 using xhci_hcd [ 3.088452] usb 2-1.5: New USB device found, idVendor=8087, idProduct=0032, bcdDevice= 0.00 [ 3.088557] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.165793] usb 2-1.6: new high-speed USB device number 6 using ehci-pci [ 3.189451] usb 3-1.3: New USB device found, idVendor=056d, idProduct=4027, bcdDevice=80.00 [ 3.189553] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.189643] usb 3-1.3: Product: EIZO USB HID Monitor [ 3.189714] usb 3-1.3: Manufacturer: EIZO [ 3.203269] input: Tablet ISD-V4 Stylus as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:056A:00E6.0001/input/input7 [ 3.203597] input: Tablet ISD-V4 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:056A:00E6.0001/input/input8 [ 3.204052] hid-generic 0003:056A:00E6.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input0 [ 3.205450] input: Tablet ISD-V4 Touchscreen as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:056A:00E6.0002/input/input9 [ 3.205696] input: Tablet ISD-V4 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:056A:00E6.0002/input/input10 [ 3.205921] input: Tablet ISD-V4 Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:056A:00E6.0002/input/input11 [ 3.206220] hid-generic 0003:056A:00E6.0002: input,hiddev1,hidraw1: USB HID v1.11 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input1 [ 3.206669] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:046D:C52B.0003/input/input12 [ 3.265797] usb 3-3.3: new full-speed USB device number 6 using xhci_hcd [ 3.266153] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input0 [ 3.266817] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:046D:C52B.0004/input/input13 [ 3.267171] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:046D:C52B.0004/input/input14 [ 3.281856] usb 2-1.6: New USB device found, idVendor=04f2, idProduct=b2ea, bcdDevice= 5.20 [ 3.281962] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.282054] usb 2-1.6: Product: Integrated Camera [ 3.282125] usb 2-1.6: Manufacturer: Chicony Electronics Co., Ltd. [ 3.284317] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.285113] ata3.00: supports DRM functions and may not be fully accessible [ 3.285196] ata3.00: ATA-10: KINGSTON SKC600MS256G, S4800105, max UDMA/133 [ 3.285306] ata3.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 3.286398] ata3.00: Features: Trust Dev-Sleep [ 3.286636] ata3.00: supports DRM functions and may not be fully accessible [ 3.287776] ata3.00: configured for UDMA/133 [ 3.298356] scsi 2:0:0:0: Direct-Access ATA KINGSTON SKC600M 0105 PQ: 0 ANSI: 5 [ 3.302582] e1000e 0000:00:19.0 eno0: renamed from eth0 [ 3.319935] sd 0:0:0:0: [sdc] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB) [ 3.319939] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 3.319941] sd 2:0:0:0: [sdb] 4096-byte physical blocks [ 3.319942] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.319946] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 3.319964] sd 1:0:0:0: [sda] Write Protect is off [ 3.319968] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.320016] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.320028] sd 0:0:0:0: [sdc] 4096-byte physical blocks [ 3.320067] sd 1:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 3.320122] sd 2:0:0:0: [sdb] Write Protect is off [ 3.320180] sd 0:0:0:0: [sdc] Write Protect is off [ 3.320244] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.320304] sd 0:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.320408] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.320477] sd 0:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.320566] sd 2:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 3.320677] sd 0:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes [ 3.321426] sdb: sdb1 sdb2 sdb3 [ 3.321668] sd 2:0:0:0: [sdb] supports TCG Opal [ 3.321728] sd 2:0:0:0: [sdb] Attached SCSI disk [ 3.323297] sdc: sdc1 sdc2 < sdc5 > [ 3.323642] sd 0:0:0:0: [sdc] supports TCG Opal [ 3.323702] sd 0:0:0:0: [sdc] Attached SCSI disk [ 3.329943] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:046D:C52B.0004/input/input15 [ 3.330292] hid-generic 0003:046D:C52B.0004: input,hiddev2,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input1 [ 3.330784] hid-generic 0003:046D:C52B.0005: hiddev3,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input2 [ 3.331285] hid-generic 0003:056D:4027.0006: hiddev4,hidraw5: USB HID v1.10 Device [EIZO EIZO USB HID Monitor] on usb-0000:00:14.0-1.3/input0 [ 3.333235] sda: sda1 [ 3.333379] sd 1:0:0:0: [sda] Attached SCSI disk [ 3.366544] usb 3-3.3: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00 [ 3.366623] usb 3-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.366694] usb 3-3.3: Product: USB-Serial Controller D [ 3.366752] usb 3-3.3: Manufacturer: Prolific Technology Inc. [ 3.563716] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 3.803613] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6 [ 3.822913] i915 0000:00:02.0: [drm] VT-d active for gfx access [ 3.823003] i915 0000:00:02.0: vgaarb: deactivate vga console [ 3.823410] Console: switching to colour dummy device 80x25 [ 3.823468] i915 0000:00:02.0: [drm] Using Transparent Hugepages [ 3.823473] i915 0000:00:02.0: [drm] DMAR active, disabling use of stolen memory [ 3.874826] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.927278] i915 0000:00:02.0: [drm] Skipping intel_backlight registration [ 3.927688] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 3.927863] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.927930] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17 [ 3.966772] input: Wacom ISDv4 E6 Pen as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:056A:00E6.0001/input/input18 [ 3.990548] wacom 0003:056A:00E6.0001: hidraw0: USB HID v1.11 Device [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input0 [ 3.991871] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input2 [ 4.055215] input: Wacom ISDv4 E6 Finger as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:056A:00E6.0002/input/input22 [ 4.055631] wacom 0003:056A:00E6.0002: hidraw1: USB HID v1.11 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input1 [ 4.118719] input: Logitech Wireless Device PID:406f Keyboard as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.4/2-1.4:1.2/0003:046D:C52B.0005/0003:046D:406F.0007/input/input24 [ 4.119624] input: Logitech Wireless Device PID:406f Mouse as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.4/2-1.4:1.2/0003:046D:C52B.0005/0003:046D:406F.0007/input/input25 [ 4.119934] hid-generic 0003:046D:406F.0007: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Device PID:406f] on usb-0000:00:1a.0-1.4/input2:1 [ 4.218748] usb 3-1.2-port1: Cannot enable. Maybe the USB cable is bad? [ 4.366515] input: Logitech MX Ergo as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.4/2-1.4:1.2/0003:046D:C52B.0005/0003:046D:406F.0007/input/input29 [ 4.367171] logitech-hidpp-device 0003:046D:406F.0007: input,hidraw3: USB HID v1.11 Keyboard [Logitech MX Ergo] on usb-0000:00:1a.0-1.4/input2:1 [ 4.758149] acpi device:0d: registered as cooling_device9 [ 4.909962] fbcon: i915drmfb (fb0) is primary device [ 5.154249] usb 4-1.2.4: new SuperSpeed USB device number 4 using xhci_hcd [ 5.178511] usb 4-1.2.4: New USB device found, idVendor=05e3, idProduct=0748, bcdDevice=12.09 [ 5.178522] usb 4-1.2.4: New USB device strings: Mfr=3, Product=4, SerialNumber=2 [ 5.178525] usb 4-1.2.4: Product: USB Storage [ 5.178528] usb 4-1.2.4: Manufacturer: Generic [ 5.178530] usb 4-1.2.4: SerialNumber: 000000001209 [ 5.193288] usb-storage 4-1.2.4:1.0: USB Mass Storage device detected [ 5.193689] scsi host6: usb-storage 4-1.2.4:1.0 [ 5.193879] usbcore: registered new interface driver usb-storage [ 5.257854] usb 3-3.4: new high-speed USB device number 9 using xhci_hcd [ 5.358452] usb 3-3.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 [ 5.358462] usb 3-3.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.358466] usb 3-3.4: Product: USB 2.0 Hub [ 5.359263] hub 3-3.4:1.0: USB hub found [ 5.359334] hub 3-3.4:1.0: 4 ports detected [ 5.765869] usb 3-3.4.1: new full-speed USB device number 10 using xhci_hcd [ 5.778547] Console: switching to colour frame buffer device 170x48 [ 5.798301] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 5.828884] usbcore: registered new interface driver uas [ 5.860565] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 5.860656] device-mapper: uevent: version 1.0.3 [ 5.860783] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 5.969761] raid6: sse2x4 gen() 11839 MB/s [ 5.986519] usb 3-3.4.1: New USB device found, idVendor=0557, idProduct=8021, bcdDevice= 1.00 [ 5.987227] usb 3-3.4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.990449] hub 3-3.4.1:1.0: USB hub found [ 5.991361] hub 3-3.4.1:1.0: 4 ports detected [ 6.037760] raid6: sse2x2 gen() 16319 MB/s [ 6.105762] raid6: sse2x1 gen() 11872 MB/s [ 6.106616] raid6: using algorithm sse2x2 gen() 16319 MB/s [ 6.173764] raid6: .... xor() 8616 MB/s, rmw enabled [ 6.174437] raid6: using ssse3x2 recovery algorithm [ 6.176782] xor: automatically using best checksumming function avx [ 6.178146] async_tx: api initialized (async) [ 6.193777] usb 3-3.4.2: new full-speed USB device number 11 using xhci_hcd [ 6.231254] scsi 6:0:0:0: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6 [ 6.232484] scsi 6:0:0:1: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6 [ 6.233157] sd 6:0:0:0: [sdd] Media removed, stopped polling [ 6.233607] sd 6:0:0:0: [sdd] Attached SCSI removable disk [ 6.233929] sd 6:0:0:1: [sde] Media removed, stopped polling [ 6.234351] sd 6:0:0:1: [sde] Attached SCSI removable disk [ 6.235794] scsi 6:0:0:2: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6 [ 6.237132] sd 6:0:0:2: [sdf] Media removed, stopped polling [ 6.237512] sd 6:0:0:2: [sdf] Attached SCSI removable disk [ 6.238420] scsi 6:0:0:3: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6 [ 6.239699] sd 6:0:0:3: [sdg] Media removed, stopped polling [ 6.240098] sd 6:0:0:3: [sdg] Attached SCSI removable disk [ 6.241662] scsi 6:0:0:4: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6 [ 6.243126] sd 6:0:0:4: [sdh] Media removed, stopped polling [ 6.243354] sd 6:0:0:4: [sdh] Attached SCSI removable disk [ 6.418536] usb 3-3.4.2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11 [ 6.418603] usb 3-3.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.418641] usb 3-3.4.2: Product: USB Receiver [ 6.418666] usb 3-3.4.2: Manufacturer: Logitech [ 6.434864] logitech-djreceiver 0003:046D:C52B.000A: hiddev1,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3.4.2/input2 [ 6.493903] usb 3-3.4.1.1: new full-speed USB device number 12 using xhci_hcd [ 6.564117] input: Logitech MX Ergo as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4.2/3-3.4.2:1.2/0003:046D:C52B.000A/0003:046D:406F.000B/input/input30 [ 6.564715] logitech-hidpp-device 0003:046D:406F.000B: input,hidraw6: USB HID v1.11 Keyboard [Logitech MX Ergo] on usb-0000:00:14.0-3.4.2/input2:1 [ 6.623573] usb 3-3.4.1.1: New USB device found, idVendor=04d9, idProduct=a0d1, bcdDevice= 1.00 [ 6.623644] usb 3-3.4.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.623681] usb 3-3.4.1.1: Product: Varmilo Keyboard [ 6.623708] usb 3-3.4.1.1: Manufacturer: AONE [ 6.643227] input: AONE Varmilo Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4.1/3-3.4.1.1/3-3.4.1.1:1.0/0003:04D9:A0D1.000C/input/input31 [ 6.702320] hid-generic 0003:04D9:A0D1.000C: input,hidraw7: USB HID v1.10 Keyboard [AONE Varmilo Keyboard] on usb-0000:00:14.0-3.4.1.1/input0 [ 6.714862] input: AONE Varmilo Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4.1/3-3.4.1.1/3-3.4.1.1:1.1/0003:04D9:A0D1.000D/input/input32 [ 6.774171] hid-generic 0003:04D9:A0D1.000D: input,hidraw8: USB HID v1.10 Keyboard [AONE Varmilo Keyboard] on usb-0000:00:14.0-3.4.1.1/input1 [ 6.781255] hid-generic 0003:04D9:A0D1.000E: hiddev2,hidraw9: USB HID v1.10 Device [AONE Varmilo Keyboard] on usb-0000:00:14.0-3.4.1.1/input2 [ 15.476830] Btrfs loaded, zoned=yes, fsverity=yes [ 15.924362] PM: Image not found (code -22) [ 16.619267] EXT4-fs (dm-1): mounted filesystem a2506fa6-fc3c-4dca-a86a-3cdefd9fdca5 ro with ordered data mode. Quota mode: none. [ 16.718923] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 16.850055] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time. [ 16.872596] systemd[1]: Inserted module 'autofs4' [ 16.896620] systemd[1]: systemd 254.5-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 16.899083] systemd[1]: Detected architecture x86-64. [ 16.902540] systemd[1]: Hostname set to . [ 17.358015] systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly. [ 17.434828] systemd[1]: Queued start job for default target graphical.target. [ 17.464447] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 17.465823] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 17.467538] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice - Encrypted Volume Units Service Slice. [ 17.469172] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 17.472270] systemd[1]: Created slice user.slice - User and Session Slice. [ 17.474908] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 17.479634] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 17.484055] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 17.488476] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups. [ 17.490062] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 17.493990] systemd[1]: Reached target slices.target - Slice Units. [ 17.497797] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 17.501423] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. [ 17.504972] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. [ 17.508516] systemd[1]: Listening on syslog.socket - Syslog Socket. [ 17.517607] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket. [ 17.519623] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 17.522541] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 17.525662] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 17.528565] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 17.531428] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 17.533776] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 17.554199] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 17.557406] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 17.560222] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 17.563149] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 17.564525] systemd[1]: Finished blk-availability.service - Availability of block devices. [ 17.569215] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 17.572538] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 17.574847] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 17.577588] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 17.579998] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 17.582768] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 17.585683] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 17.588886] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 17.592214] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 17.593609] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 17.598269] systemd[1]: Starting systemd-journald.service - Journal Service... [ 17.600941] loop: module loaded [ 17.602156] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 17.603215] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f). [ 17.605208] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 17.605216] fuse: init (API version 7.38) [ 17.611014] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 17.615142] systemd-journald[534]: Collecting audit messages is disabled. [ 17.616032] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 17.617877] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 17.619791] EXT4-fs (dm-1): re-mounted a2506fa6-fc3c-4dca-a86a-3cdefd9fdca5 r/w. Quota mode: none. [ 17.621193] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 17.623339] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 17.625482] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. [ 17.628247] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 17.628308] lp: driver loaded but no devices found [ 17.631709] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 17.631963] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 17.633315] ppdev: user-space parallel port driver [ 17.637246] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 17.638766] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 17.641577] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 17.642987] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 17.645651] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 17.647239] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 17.650315] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 17.651694] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 17.654158] systemd[1]: modprobe@loop.service: Deactivated successfully. [ 17.655487] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ 17.657947] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ 17.659157] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 17.710064] systemd[1]: Activating swap swapfile.swap - /swapfile... [ 17.713049] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 17.715896] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 17.717662] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc). [ 17.717757] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 17.717772] Adding 16777212k swap on /swapfile. Priority:-2 extents:1081 across:750534656k SSFS [ 17.719580] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed... [ 17.723034] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 17.724831] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... [ 17.727957] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully... [ 17.730407] systemd[1]: Activated swap swapfile.swap - /swapfile. [ 17.732304] systemd[1]: Started systemd-journald.service - Journal Service. [ 17.761909] systemd-journald[534]: Received client request to flush runtime journal. [ 17.937518] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 17.944865] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 17.954582] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 17.955540] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 17.964825] sd 6:0:0:1: Attached scsi generic sg4 type 0 [ 17.967747] sd 6:0:0:2: Attached scsi generic sg5 type 0 [ 17.970646] sd 6:0:0:3: Attached scsi generic sg6 type 0 [ 17.972542] sd 6:0:0:4: Attached scsi generic sg7 type 0 [ 17.995026] Adding 1003516k swap on /dev/mapper/TP--230t--vg-swap_1. Priority:-3 extents:1 across:1003516k SSFS [ 18.059835] ACPI: AC: AC Adapter [AC] (on-line) [ 18.089049] iTCO_vendor_support: vendor-support=0 [ 18.090047] Non-volatile memory driver v1.3 [ 18.109637] input: PC Speaker as /devices/platform/pcspkr/input/input33 [ 18.113709] iTCO_wdt iTCO_wdt.1.auto: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) [ 18.115637] thinkpad_acpi: ThinkPad ACPI Extras v0.26 [ 18.116557] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 18.117460] thinkpad_acpi: ThinkPad BIOS CBET4000 4.21-834-g49509473c753, EC GCHT25WW-3.22 [ 18.118325] thinkpad_acpi: Lenovo ThinkPad X230 Tablet, model 20OJKGY [ 18.129184] thinkpad_acpi: radio switch found; radios are enabled [ 18.130232] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode [ 18.131145] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 18.131973] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 18.135623] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ 18.143012] at24 0-0050: supply vcc not found, using dummy regulator [ 18.145036] at24 0-0050: 256 byte spd EEPROM, read-only [ 18.146772] at24 0-0051: supply vcc not found, using dummy regulator [ 18.149289] at24 0-0051: 256 byte spd EEPROM, read-only [ 18.150353] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 18.159069] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 18.160256] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 18.163521] thinkpad_acpi: battery 1 registered (start 0, stop 100, behaviours: 0x1) [ 18.164535] ACPI: battery: new extension: ThinkPad Battery Extension [ 18.165784] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input34 [ 18.226411] gsmi: no gsmi handler in firmware [ 18.226558] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 18.226868] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 18.227156] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 18.227456] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 18.230649] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 18.233719] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 18.244317] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 18.245272] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 18.246254] RAPL PMU: hw unit of domain package 2^-16 Joules [ 18.247233] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 18.294673] Intel(R) Wireless WiFi driver for Linux [ 18.298517] iwlwifi 0000:02:00.0: Detected crf-id 0x400410, cnv-id 0x400410 wfpm id 0x80000000 [ 18.299579] iwlwifi 0000:02:00.0: PCI dev 2725/0024, rev=0x420, rfid=0x10d000 [ 18.305433] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 18.307785] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-ty-a0-gf-a0-83.ucode [ 18.323707] iwlwifi 0000:02:00.0: api flags index 2 larger than supported by driver [ 18.324742] iwlwifi 0000:02:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.41 [ 18.326746] iwlwifi 0000:02:00.0: firmware: failed to load iwl-debug-yoyo.bin (-2) [ 18.327726] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ 18.328879] iwlwifi 0000:02:00.0: firmware: failed to load iwl-debug-yoyo.bin (-2) [ 18.329960] iwlwifi 0000:02:00.0: loaded firmware version 83.e8f84e98.0 ty-a0-gf-a0-83.ucode op_mode iwlmvm [ 18.343683] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 18.344705] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 18.345512] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) [ 18.346333] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 18.347320] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 18.348410] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 18.349361] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 [ 18.350158] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 18.494908] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input35 [ 18.495974] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input36 [ 18.523074] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input37 [ 18.523193] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input38 [ 18.525954] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input39 [ 18.527108] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input40 [ 18.528216] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input41 [ 18.529271] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input42 [ 18.538366] iwlwifi 0000:02:00.0: Detected Intel(R) Wi-Fi 6 AX210 160MHz, REV=0x420 [ 18.538527] thermal thermal_zone2: failed to read out thermal zone (-61) [ 18.546453] intel_rapl_common: Found RAPL domain package [ 18.547409] intel_rapl_common: Found RAPL domain core [ 18.548315] intel_rapl_common: Found RAPL domain uncore [ 18.552041] iwlwifi 0000:02:00.0: WRT: Invalid buffer destination [ 18.607123] EXT4-fs (sda1): recovery complete [ 18.608110] EXT4-fs (sda1): mounted filesystem 9887db5d-157c-40c4-9f3b-24ab2c23fe2f r/w with ordered data mode. Quota mode: none. [ 18.713044] iwlwifi 0000:02:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x1f [ 18.713887] iwlwifi 0000:02:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [ 18.713933] iwlwifi 0000:02:00.0: WFPM_AUTH_KEY_0: 0x90 [ 18.715579] iwlwifi 0000:02:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0 [ 18.716951] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-ty-a0-gf-a0.pnvm [ 18.718325] iwlwifi 0000:02:00.0: loaded PNVM version e4a49534 [ 18.734036] iwlwifi 0000:02:00.0: Detected RF GF, rfid=0x10d000 [ 18.772180] EXT4-fs (sdc1): mounting ext2 file system using the ext4 subsystem [ 18.774357] EXT4-fs (sdc1): mounted filesystem 5b16bf32-bba4-4e5d-9a2b-6e9cd7fa067d r/w without journal. Quota mode: none. [ 18.804653] iwlwifi 0000:02:00.0: base HW address: f4:7b:09:ca:52:29 [ 18.814106] audit: type=1400 audit(1699314543.166:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1694 comm="apparmor_parser" [ 18.815670] audit: type=1400 audit(1699314543.166:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1698 comm="apparmor_parser" [ 18.817301] audit: type=1400 audit(1699314543.166:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1698 comm="apparmor_parser" [ 18.820783] audit: type=1400 audit(1699314543.170:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="mariadbd_akonadi" pid=1696 comm="apparmor_parser" [ 18.823020] audit: type=1400 audit(1699314543.170:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="mysqld_akonadi" pid=1697 comm="apparmor_parser" [ 18.824621] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 18.825296] audit: type=1400 audit(1699314543.170:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/akonadiserver" pid=1701 comm="apparmor_parser" [ 18.828979] audit: type=1400 audit(1699314543.178:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1705 comm="apparmor_parser" [ 18.831418] audit: type=1400 audit(1699314543.178:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1705 comm="apparmor_parser" [ 18.832710] audit: type=1400 audit(1699314543.178:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1705 comm="apparmor_parser" [ 18.834033] audit: type=1400 audit(1699314543.178:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1700 comm="apparmor_parser" [ 19.048199] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input43 [ 19.369870] NET: Registered PF_QIPCRTR protocol family [ 19.667753] iwlwifi 0000:02:00.0: WRT: Invalid buffer destination [ 19.772081] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 19.824347] iwlwifi 0000:02:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x1f [ 19.825216] iwlwifi 0000:02:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [ 19.826086] iwlwifi 0000:02:00.0: WFPM_AUTH_KEY_0: 0x90 [ 19.826937] iwlwifi 0000:02:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0 [ 19.831101] mc: Linux media interface: v0.10 [ 19.848778] usbcore: registered new interface driver usbserial_generic [ 19.849638] usbserial: USB Serial support registered for generic [ 19.856310] usbcore: registered new interface driver pl2303 [ 19.856954] usbserial: USB Serial support registered for pl2303 [ 19.857180] videodev: Linux video capture interface: v2.00 [ 19.857801] pl2303 3-3.3:1.0: pl2303 converter detected [ 19.860049] usb 3-3.3: pl2303 converter now attached to ttyUSB0 [ 19.916466] iwlwifi 0000:02:00.0: Registered PHC clock: iwlwifi-PTP, with index: 1 [ 19.918338] Bluetooth: Core ver 2.22 [ 19.919009] NET: Registered PF_BLUETOOTH protocol family [ 19.919766] Bluetooth: HCI device and connection manager initialized [ 19.920454] Bluetooth: HCI socket layer initialized [ 19.921090] Bluetooth: L2CAP socket layer initialized [ 19.921716] Bluetooth: SCO socket layer initialized [ 19.946452] usb 2-1.6: Found UVC 1.00 device Integrated Camera (04f2:b2ea) [ 19.953155] usbcore: registered new interface driver uvcvideo [ 19.976669] iwlwifi 0000:02:00.0: WRT: Invalid buffer destination [ 20.002237] usbcore: registered new interface driver btusb [ 20.004940] Bluetooth: hci0: Firmware timestamp 2023.35 buildtype 1 build 70976 [ 20.011900] bluetooth hci0: firmware: direct-loading firmware intel/ibt-0041-0041.sfi [ 20.016440] Bluetooth: hci0: Found device firmware: intel/ibt-0041-0041.sfi [ 20.017127] Bluetooth: hci0: Boot Address: 0x100800 [ 20.017755] Bluetooth: hci0: Firmware Version: 98-13.23 [ 20.048778] usb 2-1.5: USB disconnect, device number 5 [ 20.051891] Bluetooth: hci0: FW download error recovery failed (-19) [ 20.052573] Bluetooth: hci0: sending frame failed (-19) [ 20.053420] Bluetooth: hci0: Reading supported features failed (-19) [ 20.054132] Bluetooth: hci0: Error reading debug features [ 20.104396] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.105028] Bluetooth: BNEP filters: protocol multicast [ 20.105686] Bluetooth: BNEP socket layer initialized [ 20.133136] iwlwifi 0000:02:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x1f [ 20.133846] iwlwifi 0000:02:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [ 20.134566] iwlwifi 0000:02:00.0: WFPM_AUTH_KEY_0: 0x90 [ 20.135195] iwlwifi 0000:02:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0 [ 20.289356] process '/usr/bin/anydesk' started with executable stack [ 20.429797] usb 2-1.5: new full-speed USB device number 7 using ehci-pci [ 20.539771] usb 2-1.5: New USB device found, idVendor=8087, idProduct=0032, bcdDevice= 0.00 [ 20.540442] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 20.543927] Bluetooth: hci0: Device revision is 0 [ 20.544715] Bluetooth: hci0: Secure boot is enabled [ 20.545497] Bluetooth: hci0: OTP lock is enabled [ 20.546262] Bluetooth: hci0: API lock is enabled [ 20.547000] Bluetooth: hci0: Debug lock is disabled [ 20.547635] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 20.548343] Bluetooth: hci0: Bootloader timestamp 2019.40 buildtype 1 build 38 [ 20.549243] bluetooth hci0: firmware: direct-loading firmware intel/ibt-0041-0041.sfi [ 20.554641] Bluetooth: hci0: Found device firmware: intel/ibt-0041-0041.sfi [ 20.555501] Bluetooth: hci0: Boot Address: 0x100800 [ 20.556272] Bluetooth: hci0: Firmware Version: 98-13.23 [ 21.056448] pipewire[2960]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set [ 21.977790] Bluetooth: hci0: Waiting for firmware download to complete [ 21.978902] Bluetooth: hci0: Firmware loaded in 1390134 usecs [ 21.978981] Bluetooth: hci0: Waiting for device to boot [ 22.004927] Bluetooth: hci0: Device booted in 25389 usecs [ 22.005187] bluetooth hci0: firmware: direct-loading firmware intel/ibt-0041-0041.ddc [ 22.005206] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0041-0041.ddc [ 22.006928] Bluetooth: hci0: Applying Intel DDC parameters completed [ 22.007918] Bluetooth: hci0: No support for BT device in ACPI firmware [ 22.009931] Bluetooth: hci0: Firmware timestamp 2023.13 buildtype 1 build 62562 [ 22.086207] Bluetooth: MGMT ver 1.22 [ 22.091004] NET: Registered PF_ALG protocol family [ 22.112913] Bluetooth: RFCOMM TTY layer initialized [ 22.112922] Bluetooth: RFCOMM socket layer initialized [ 22.112927] Bluetooth: RFCOMM ver 1.11 [ 22.159983] Bluetooth: hci0: Bad flag given (0x1) vs supported (0x0) [ 22.875787] e1000e 0000:00:19.0 eno0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 23.897789] usb 4-1: USB disconnect, device number 2 [ 23.897800] usb 4-1.2: USB disconnect, device number 3 [ 23.897804] usb 4-1.2.4: USB disconnect, device number 4 [ 23.926582] rfkill: input handler disabled [ 24.584117] usb 4-1: new SuperSpeed USB device number 5 using xhci_hcd [ 24.607572] usb 4-1: New USB device found, idVendor=045b, idProduct=0210, bcdDevice= 1.00 [ 24.607582] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 24.608444] hub 4-1:1.0: USB hub found [ 24.608688] hub 4-1:1.0: 3 ports detected [ 24.902010] usb 4-1.2: new SuperSpeed USB device number 6 using xhci_hcd [ 24.929147] usb 4-1.2: New USB device found, idVendor=05e3, idProduct=0612, bcdDevice=92.12 [ 24.929156] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 24.929158] usb 4-1.2: Product: USB3.0 Hub [ 24.929160] usb 4-1.2: Manufacturer: GenesysLogic [ 24.929956] hub 4-1.2:1.0: USB hub found [ 24.930277] hub 4-1.2:1.0: 4 ports detected [ 25.226188] usb 4-1.2.4: new SuperSpeed USB device number 7 using xhci_hcd [ 25.249645] usb 4-1.2.4: New USB device found, idVendor=05e3, idProduct=0748, bcdDevice=12.09 [ 25.249658] usb 4-1.2.4: New USB device strings: Mfr=3, Product=4, SerialNumber=2 [ 25.249661] usb 4-1.2.4: Product: USB Storage [ 25.249664] usb 4-1.2.4: Manufacturer: Generic [ 25.249666] usb 4-1.2.4: SerialNumber: 000000001209 [ 25.250571] usb-storage 4-1.2.4:1.0: USB Mass Storage device detected [ 25.250914] scsi host6: usb-storage 4-1.2.4:1.0 [ 25.836005] vboxdrv: loading out-of-tree module taints kernel. [ 25.836015] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 25.861509] vboxdrv: Found 8 processor cores/threads [ 25.882083] vboxdrv: TSC mode is Invariant, tentative frequency 2294776998 Hz [ 25.882091] vboxdrv: Successfully loaded version 7.0.12_Debian r159484 (interface 0x00330004) [ 25.899761] VBoxNetFlt: Successfully started. [ 25.913190] VBoxNetAdp: Successfully started. [ 26.259164] scsi 6:0:0:0: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6 [ 26.259311] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 26.259974] sd 6:0:0:0: [sdd] Media removed, stopped polling [ 26.260178] sd 6:0:0:0: [sdd] Attached SCSI removable disk [ 26.261024] scsi 6:0:0:1: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6 [ 26.261171] sd 6:0:0:1: Attached scsi generic sg4 type 0 [ 26.262350] sd 6:0:0:1: [sde] Media removed, stopped polling [ 26.262676] sd 6:0:0:1: [sde] Attached SCSI removable disk [ 26.263903] scsi 6:0:0:2: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6 [ 26.264092] sd 6:0:0:2: Attached scsi generic sg5 type 0 [ 26.265201] sd 6:0:0:2: [sdf] Media removed, stopped polling [ 26.265454] sd 6:0:0:2: [sdf] Attached SCSI removable disk [ 26.266702] scsi 6:0:0:3: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6 [ 26.266873] sd 6:0:0:3: Attached scsi generic sg6 type 0 [ 26.268061] sd 6:0:0:3: [sdg] Media removed, stopped polling [ 26.268278] sd 6:0:0:3: [sdg] Attached SCSI removable disk [ 26.269364] scsi 6:0:0:4: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6 [ 26.269525] sd 6:0:0:4: Attached scsi generic sg7 type 0 [ 26.270914] sd 6:0:0:4: [sdh] Media removed, stopped polling [ 26.271154] sd 6:0:0:4: [sdh] Attached SCSI removable disk [ 26.280605] kauditd_printk_skb: 29 callbacks suppressed [ 26.280609] audit: type=1400 audit(1699314550.630:41): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=3774 comm="apparmor_parser" [ 26.340507] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 26.342444] Bridge firewalling registered [ 26.447728] Initializing XFRM netlink socket [ 28.791048] rfkill: input handler enabled [ 32.006222] warning: `kded5' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 33.960021] wlp2s0: authenticate with 44:4e:6d:04:50:0f [ 33.965711] wlp2s0: send auth to 44:4e:6d:04:50:0f (try 1/3) [ 33.983240] logitech-hidpp-device 0003:046D:406F.000B: HID++ 4.5 device connected. [ 34.080062] wlp2s0: authenticate with 44:4e:6d:04:50:0f [ 34.080074] wlp2s0: send auth to 44:4e:6d:04:50:0f (try 1/3) [ 34.114188] wlp2s0: authenticated [ 34.117945] wlp2s0: associate with 44:4e:6d:04:50:0f (try 1/3) [ 34.122658] wlp2s0: RX AssocResp from 44:4e:6d:04:50:0f (capab=0x1511 status=0 aid=1) [ 34.134700] wlp2s0: associated [ 34.230944] wlp2s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 44:4e:6d:04:50:0f [ 49.042763] systemd-journald[534]: Time jumped backwards, rotating. [ 52.425811] sd 1:0:0:0: [sda] Synchronizing SCSI cache [ 52.426107] sd 1:0:0:0: [sda] Stopping disk [ 53.354569] ata2.00: Entering standby power mode [ 58.613885] usb 4-1: USB disconnect, device number 5 [ 58.613903] usb 4-1.2: USB disconnect, device number 6 [ 58.613908] usb 4-1.2.4: USB disconnect, device number 7 [ 59.202053] usb 4-1: new SuperSpeed USB device number 8 using xhci_hcd [ 59.224617] usb 4-1: New USB device found, idVendor=045b, idProduct=0210, bcdDevice= 1.00 [ 59.224636] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 59.226078] hub 4-1:1.0: USB hub found [ 59.226381] hub 4-1:1.0: 3 ports detected [ 59.513997] usb 4-1.2: new SuperSpeed USB device number 9 using xhci_hcd [ 59.537507] usb 4-1.2: New USB device found, idVendor=05e3, idProduct=0612, bcdDevice=92.12 [ 59.537522] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 59.537527] usb 4-1.2: Product: USB3.0 Hub [ 59.537530] usb 4-1.2: Manufacturer: GenesysLogic [ 59.538554] hub 4-1.2:1.0: USB hub found [ 59.538913] hub 4-1.2:1.0: 4 ports detected [ 59.826097] usb 4-1.2.4: new SuperSpeed USB device number 10 using xhci_hcd [ 59.853220] usb 4-1.2.4: New USB device found, idVendor=05e3, idProduct=0748, bcdDevice=12.09 [ 59.853228] usb 4-1.2.4: New USB device strings: Mfr=3, Product=4, SerialNumber=2 [ 59.853230] usb 4-1.2.4: Product: USB Storage [ 59.853232] usb 4-1.2.4: Manufacturer: Generic [ 59.853234] usb 4-1.2.4: SerialNumber: 000000001209 [ 59.854021] usb-storage 4-1.2.4:1.0: USB Mass Storage device detected [ 59.854304] scsi host6: usb-storage 4-1.2.4:1.0 [ 60.883638] scsi 6:0:0:0: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6 [ 60.884188] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 60.885143] sd 6:0:0:0: [sdd] Media removed, stopped polling [ 60.885734] sd 6:0:0:0: [sdd] Attached SCSI removable disk [ 60.886484] scsi 6:0:0:1: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6 [ 60.886933] sd 6:0:0:1: Attached scsi generic sg4 type 0 [ 60.887939] sd 6:0:0:1: [sde] Media removed, stopped polling [ 60.888445] sd 6:0:0:1: [sde] Attached SCSI removable disk [ 60.889266] scsi 6:0:0:2: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6 [ 60.889685] sd 6:0:0:2: Attached scsi generic sg5 type 0 [ 60.890754] sd 6:0:0:2: [sdf] Media removed, stopped polling [ 60.891201] sd 6:0:0:2: [sdf] Attached SCSI removable disk [ 60.892086] scsi 6:0:0:3: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6 [ 60.892540] sd 6:0:0:3: Attached scsi generic sg6 type 0 [ 60.893498] sd 6:0:0:3: [sdg] Media removed, stopped polling [ 60.893973] sd 6:0:0:3: [sdg] Attached SCSI removable disk [ 60.894910] scsi 6:0:0:4: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6 [ 60.895327] sd 6:0:0:4: Attached scsi generic sg7 type 0 [ 60.896576] sd 6:0:0:4: [sdh] Media removed, stopped polling [ 60.897067] sd 6:0:0:4: [sdh] Attached SCSI removable disk