|
|
|
*** Pre-CBMEM romstage console overflowed, log truncated! ***
|
|
2021 romstage starting (log level: 7)...
|
|
Setting up local APIC 0x0
|
|
SMBus controller enabled
|
|
Setting up static northbridge registers... done
|
|
Initializing Graphics...
|
|
Back from systemagent_early_init()
|
|
Intel ME early init
|
|
Intel ME firmware is ready
|
|
ME: Requested 0MB UMA
|
|
Starting native Platform init
|
|
DMI: Running at X4 @ 5000MT/s
|
|
FMAP: area RW_MRC_CACHE found @ 20000 (65536 bytes)
|
|
Trying stored timings.
|
|
Starting Ivy Bridge RAM training (fast boot).
|
|
100MHz reference clock support: yes
|
|
PLL_REF100_CFG value: 0x7
|
|
Trying CAS 9, tCK 320.
|
|
Found compatible clock, CAS pair.
|
|
Selected DRAM frequency: 800 MHz
|
|
Selected CAS latency : 9T
|
|
MPLL busy... done in 60 us
|
|
MPLL frequency is set at : 800 MHz
|
|
Done dimm mapping
|
|
Update PCI-E configuration space:
|
|
PCI(0, 0, 0)[a0] = 0
|
|
PCI(0, 0, 0)[a4] = 4
|
|
PCI(0, 0, 0)[bc] = 8ea00000
|
|
PCI(0, 0, 0)[a8] = 71600000
|
|
PCI(0, 0, 0)[ac] = 4
|
|
PCI(0, 0, 0)[b8] = 80000000
|
|
PCI(0, 0, 0)[b0] = 80a00000
|
|
PCI(0, 0, 0)[b4] = 80800000
|
|
Done memory map
|
|
Done io registers
|
|
t123: 1767, 6000, 7620
|
|
ME: Wrong mode : 2
|
|
ME: FWS2: 0x100a0140
|
|
ME: Bist in progress: 0x0
|
|
ME: ICC Status : 0x0
|
|
ME: Invoke MEBx : 0x0
|
|
ME: CPU replaced : 0x0
|
|
ME: MBP ready : 0x0
|
|
ME: MFS failure : 0x1
|
|
ME: Warm reset req : 0x0
|
|
ME: CPU repl valid : 0x1
|
|
ME: (Reserved) : 0x0
|
|
ME: FW update req : 0x0
|
|
ME: (Reserved) : 0x0
|
|
ME: Current state : 0xa
|
|
ME: Current PM event: 0x0
|
|
ME: Progress code : 0x1
|
|
PASSED! Tell ME that DRAM is ready
|
|
ME: ME is reporting as disabled, so not waiting for a response.
|
|
ME: FWS2: 0x100a0140
|
|
ME: Bist in progress: 0x0
|
|
ME: ICC Status : 0x0
|
|
ME: Invoke MEBx : 0x0
|
|
ME: CPU replaced : 0x0
|
|
ME: MBP ready : 0x0
|
|
ME: MFS failure : 0x1
|
|
ME: Warm reset req : 0x0
|
|
ME: CPU repl valid : 0x1
|
|
ME: (Reserved) : 0x0
|
|
ME: FW update req : 0x0
|
|
ME: (Reserved) : 0x0
|
|
ME: Current state : 0xa
|
|
ME: Current PM event: 0x0
|
|
ME: Progress code : 0x1
|
|
ME: Requested BIOS Action: No DID Ack received
|
|
ME: FW Partition Table : OK
|
|
ME: Bringup Loader Failure : NO
|
|
ME: Firmware Init Complete : NO
|
|
ME: Manufacturing Mode : YES
|
|
ME: Boot Options Present : NO
|
|
ME: Update In Progress : NO
|
|
ME: Current Working State : Initializing
|
|
ME: Current Operation State : Bring up
|
|
ME: Current Operation Mode : Debug or Disabled by AltDisableBit
|
|
ME: Error Code : No Error
|
|
ME: Progress Phase : BUP Phase
|
|
ME: Power Management Event : Clean Moff->Mx wake
|
|
ME: Progress Phase State : Check to see if straps say ME DISABLED
|
|
memcfg DDR3 ref clock 133 MHz
|
|
memcfg DDR3 clock 1596 MHz
|
|
memcfg channel assignment: A: 0, B 1, C 2
|
|
memcfg channel[0] config (00620020):
|
|
ECC inactive
|
|
enhanced interleave mode on
|
|
rank interleave on
|
|
DIMMA 8192 MB width x8 dual rank, selected
|
|
DIMMB 0 MB width x8 single rank
|
|
memcfg channel[1] config (00620020):
|
|
ECC inactive
|
|
enhanced interleave mode on
|
|
rank interleave on
|
|
DIMMA 8192 MB width x8 dual rank, selected
|
|
DIMMB 0 MB width x8 single rank
|
|
CBMEM:
|
|
IMD: root @ 0x7ffff000 254 entries.
|
|
IMD: root @ 0x7fffec00 62 entries.
|
|
External stage cache:
|
|
IMD: root @ 0x803ff000 254 entries.
|
|
IMD: root @ 0x803fec00 62 entries.
|
|
CBMEM entry for DIMM info: 0x7ffdb000
|
|
SMM Memory Map
|
|
SMRAM : 0x80000000 0x800000
|
|
Subregion 0: 0x80000000 0x300000
|
|
Subregion 1: 0x80300000 0x100000
|
|
Subregion 2: 0x80400000 0x400000
|
|
MTRR Range: Start=7f800000 End=80000000 (Size 800000)
|
|
MTRR Range: Start=80000000 End=80800000 (Size 800000)
|
|
MTRR Range: Start=ff000000 End=0 (Size 1000000)
|
|
Normal boot
|
|
CBFS: Found 'fallback/postcar' @0x53100 size 0x5130 in mcache @0xfeff1098
|
|
Loading module at 0x7ffd0000 with entry 0x7ffd0031. filesize: 0x4d68 memsize: 0x9078
|
|
Processing 226 relocs. Offset value of 0x7dfd0000
|
|
BS: romstage times (exec / console): total (unknown) / 1 ms
|
|
|
|
|
|
coreboot-4.15-CoreBoot 4.15 X230 Tablet Tue Nov 9 15:49:46 UTC 2021 postcar starting (log level: 7)...
|
|
Normal boot
|
|
CBFS: Found 'fallback/ramstage' @0x19b00 size 0x186e4 in mcache @0x7ffdd0dc
|
|
Loading module at 0x7ff88000 with entry 0x7ff88000. filesize: 0x31358 memsize: 0x46a50
|
|
Processing 3489 relocs. Offset value of 0x7f188000
|
|
BS: postcar times (exec / console): total (unknown) / 0 ms
|
|
|
|
|
|
coreboot-4.15-CoreBoot 4.15 X230 Tablet Tue Nov 9 15:49:46 UTC 2021 ramstage starting (log level: 7)...
|
|
Normal boot
|
|
Enumerating buses...
|
|
Root Device scanning...
|
|
CPU_CLUSTER: 0 enabled
|
|
DOMAIN: 0000 enabled
|
|
DOMAIN: 0000 scanning...
|
|
PCI: pci_scan_bus for bus 00
|
|
PCI: 00:00.0 [8086/0154] enabled
|
|
PCI: 00:01.0 [8086/0151] disabled
|
|
PCI: 00:02.0 [8086/0166] enabled
|
|
PCI: 00:04.0 [8086/0153] enabled
|
|
PCI: 00:14.0 [8086/1e31] enabled
|
|
PCI: 00:16.0 [8086/1e3a] enabled
|
|
PCI: 00:16.1: Disabling device
|
|
PCI: 00:16.2: Disabling device
|
|
PCI: 00:16.3: Disabling device
|
|
PCI: 00:19.0 [8086/1502] enabled
|
|
PCI: 00:1a.0 [8086/1e2d] enabled
|
|
PCI: 00:1b.0 [8086/1e20] enabled
|
|
PCH: PCIe Root Port coalescing is enabled
|
|
PCI: 00:1c.0 [8086/1e10] enabled
|
|
PCI: 00:1c.1 [8086/1e12] enabled
|
|
PCI: 00:1c.2 [8086/1e14] enabled
|
|
PCI: 00:1c.3: Disabling device
|
|
PCI: 00:1c.3 [8086/1e16] disabled
|
|
PCI: 00:1c.4: Disabling device
|
|
PCI: 00:1c.4: check set enabled
|
|
PCI: 00:1c.5: Disabling device
|
|
PCI: 00:1c.6: Disabling device
|
|
PCI: 00:1c.7: Disabling device
|
|
PCI: 00:1d.0 [8086/1e26] enabled
|
|
PCI: 00:1e.0: Disabling device
|
|
PCI: 00:1e.0 [8086/2448] disabled
|
|
PCI: 00:1f.0 [8086/1e55] enabled
|
|
PCI: 00:1f.2 [8086/1e01] enabled
|
|
PCI: 00:1f.3 [8086/1e22] enabled
|
|
PCI: 00:1f.5: Disabling device
|
|
PCI: 00:1f.5 [8086/1e09] disabled No operations
|
|
PCI: 00:1f.6 [8086/1e24] enabled
|
|
PCI: Leftover static devices:
|
|
PCI: 00:16.1
|
|
PCI: 00:16.2
|
|
PCI: 00:16.3
|
|
PCI: 00:1c.4
|
|
PCI: 00:1c.5
|
|
PCI: 00:1c.6
|
|
PCI: 00:1c.7
|
|
PCI: Check your devicetree.cb.
|
|
PCI: 00:1c.0 scanning...
|
|
PCI: 00:1c.0: No LTR support
|
|
PCI: pci_scan_bus for bus 01
|
|
PCI: 01:00.0 [1180/e823] enabled
|
|
Enabling Common Clock Configuration
|
|
ASPM: Enabled L0s and L1
|
|
PCIe: Max_Payload_Size adjusted to 128
|
|
PCI: 01:00.0: No LTR support
|
|
scan_bus: bus PCI: 00:1c.0 finished in 0 msecs
|
|
PCI: 00:1c.1 scanning...
|
|
PCI: 00:1c.1: No LTR support
|
|
PCI: pci_scan_bus for bus 02
|
|
PCI: 02:00.0 [8086/2723] enabled
|
|
Enabling Common Clock Configuration
|
|
ASPM: Enabled L1
|
|
PCIe: Max_Payload_Size adjusted to 128
|
|
scan_bus: bus PCI: 00:1c.1 finished in 0 msecs
|
|
PCI: 00:1c.2 scanning...
|
|
PCI: 00:1c.2: No LTR support
|
|
PCI: pci_scan_bus for bus 03
|
|
scan_bus: bus PCI: 00:1c.2 finished in 0 msecs
|
|
PCI: 00:1f.0 scanning...
|
|
PMH7: ID 05 Revision 12
|
|
PNP: 00ff.1 enabled
|
|
PNP: 0c31.0 enabled
|
|
H8: EC Firmware ID GCHT25WW-3.22, Version 4.01B
|
|
H8: WWAN not installed
|
|
PNP: 00ff.2 enabled
|
|
scan_bus: bus PCI: 00:1f.0 finished in 4 msecs
|
|
PCI: 00:1f.3 scanning...
|
|
I2C: 01:54 enabled
|
|
bus: PCI: 00:1f.3[0]->I2C: 01:55 enabled
|
|
bus: PCI: 00:1f.3[0]->I2C: 01:56 enabled
|
|
bus: PCI: 00:1f.3[0]->I2C: 01:57 enabled
|
|
bus: PCI: 00:1f.3[0]->I2C: 01:5c enabled
|
|
bus: PCI: 00:1f.3[0]->I2C: 01:5d enabled
|
|
bus: PCI: 00:1f.3[0]->I2C: 01:5e enabled
|
|
bus: PCI: 00:1f.3[0]->I2C: 01:5f enabled
|
|
bus: PCI: 00:1f.3[0]->scan_bus: bus PCI: 00:1f.3 finished in 0 msecs
|
|
scan_bus: bus DOMAIN: 0000 finished in 5 msecs
|
|
scan_bus: bus Root Device finished in 5 msecs
|
|
done
|
|
BS: BS_DEV_ENUMERATE run times (exec / console): 6 / 0 ms
|
|
FMAP: area RW_MRC_CACHE found @ 20000 (65536 bytes)
|
|
MRC: No data in cbmem for 'RW_MRC_CACHE'.
|
|
found VGA at PCI: 00:02.0
|
|
Setting up VGA for PCI: 00:02.0
|
|
Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000
|
|
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
|
|
Allocating resources...
|
|
Reading resources...
|
|
Adding PCIe enhanced config space BAR 0xf0000000-0xf4000000.
|
|
TOUUD 0x471600000 TOLUD 0x8ea00000 TOM 0x400000000
|
|
MEBASE 0x7ffff00000
|
|
IGD decoded, subtracting 224M UMA and 2M GTT
|
|
TSEG base 0x80000000 size 8M
|
|
Available memory below 4GB: 2048M
|
|
Available memory above 4GB: 14102M
|
|
PNP: 00ff.1 missing read_resources
|
|
PNP: 00ff.2 missing read_resources
|
|
Done reading resources.
|
|
=== Resource allocator: DOMAIN: 0000 - Pass 1 (gathering requirements) ===
|
|
PCI: 00:1c.0 io: size: 0 align: 12 gran: 12 limit: ffff
|
|
PCI: 00:1c.0 io: size: 0 align: 12 gran: 12 limit: ffff done
|
|
PCI: 00:1c.0 mem: size: 0 align: 20 gran: 20 limit: ffffffff
|
|
PCI: 01:00.0 10 * [0x0 - 0xff] mem
|
|
PCI: 00:1c.0 mem: size: 100000 align: 20 gran: 20 limit: ffffffff done
|
|
PCI: 00:1c.0 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff
|
|
PCI: 00:1c.0 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff done
|
|
PCI: 00:1c.1 io: size: 0 align: 12 gran: 12 limit: ffff
|
|
PCI: 00:1c.1 io: size: 0 align: 12 gran: 12 limit: ffff done
|
|
PCI: 00:1c.1 mem: size: 0 align: 20 gran: 20 limit: ffffffff
|
|
PCI: 02:00.0 10 * [0x0 - 0x3fff] mem
|
|
PCI: 00:1c.1 mem: size: 100000 align: 20 gran: 20 limit: ffffffff done
|
|
PCI: 00:1c.1 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff
|
|
PCI: 00:1c.1 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff done
|
|
PCI: 00:1c.2 io: size: 0 align: 12 gran: 12 limit: ffff
|
|
NONE 18 * [0x0 - 0xfff] io
|
|
PCI: 00:1c.2 io: size: 1000 align: 12 gran: 12 limit: ffff done
|
|
PCI: 00:1c.2 mem: size: 0 align: 20 gran: 20 limit: ffffffff
|
|
NONE 10 * [0x0 - 0x7fffff] mem
|
|
PCI: 00:1c.2 mem: size: 800000 align: 20 gran: 20 limit: ffffffff done
|
|
PCI: 00:1c.2 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff
|
|
NONE 14 * [0x0 - 0xfffffff] prefmem
|
|
PCI: 00:1c.2 prefmem: size: 10000000 align: 20 gran: 20 limit: ffffffffffffffff done
|
|
=== Resource allocator: DOMAIN: 0000 - Pass 2 (allocating resources) ===
|
|
DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff
|
|
update_constraints: PCI: 00:1f.0 10000000 base 00000000 limit 00000fff io (fixed)
|
|
update_constraints: PCI: 00:1f.0 10000200 base 00001600 limit 0000167b io (fixed)
|
|
update_constraints: PCI: 00:1f.0 10000300 base 000015e0 limit 000015eb io (fixed)
|
|
update_constraints: PNP: 00ff.1 77 base 000015e0 limit 000015ef io (fixed)
|
|
update_constraints: PCI: 00:1f.3 20 base 00000400 limit 0000041f io (fixed)
|
|
DOMAIN: 0000: Resource ranges:
|
|
* Base: 1000, Size: 5e0, Tag: 100
|
|
* Base: 15f0, Size: 10, Tag: 100
|
|
* Base: 167c, Size: e984, Tag: 100
|
|
PCI: 00:1c.2 1c * [0x2000 - 0x2fff] limit: 2fff io
|
|
PCI: 00:02.0 20 * [0x1000 - 0x103f] limit: 103f io
|
|
PCI: 00:19.0 18 * [0x1040 - 0x105f] limit: 105f io
|
|
PCI: 00:1f.2 20 * [0x1060 - 0x107f] limit: 107f io
|
|
PCI: 00:1f.2 10 * [0x1080 - 0x1087] limit: 1087 io
|
|
PCI: 00:1f.2 18 * [0x1088 - 0x108f] limit: 108f io
|
|
PCI: 00:1f.2 14 * [0x1090 - 0x1093] limit: 1093 io
|
|
PCI: 00:1f.2 1c * [0x1094 - 0x1097] limit: 1097 io
|
|
DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff done
|
|
DOMAIN: 0000 mem: base: 0 size: 0 align: 0 gran: 0 limit: fffffffff
|
|
update_constraints: PCI: 00:00.0 60 base f0000000 limit f3ffffff mem (fixed)
|
|
update_constraints: PCI: 00:00.0 03 base 00000000 limit 0009ffff mem (fixed)
|
|
update_constraints: PCI: 00:00.0 04 base 00100000 limit 7fffffff mem (fixed)
|
|
update_constraints: PCI: 00:00.0 05 base 100000000 limit 4715fffff mem (fixed)
|
|
update_constraints: PCI: 00:00.0 06 base 80000000 limit 8e9fffff mem (fixed)
|
|
update_constraints: PCI: 00:00.0 07 base 000a0000 limit 000bffff mem (fixed)
|
|
update_constraints: PCI: 00:00.0 08 base 000c0000 limit 000fffff mem (fixed)
|
|
update_constraints: PCI: 00:00.0 09 base fed90000 limit fed90fff mem (fixed)
|
|
update_constraints: PCI: 00:00.0 0a base fed91000 limit fed91fff mem (fixed)
|
|
update_constraints: PCI: 00:1f.0 10000100 base ff000000 limit ffffffff mem (fixed)
|
|
update_constraints: PCI: 00:1f.0 03 base fec00000 limit fec00fff mem (fixed)
|
|
update_constraints: PNP: 0c31.0 00 base fed40000 limit fed44fff mem (fixed)
|
|
DOMAIN: 0000: Resource ranges:
|
|
* Base: 8ea00000, Size: 61600000, Tag: 200
|
|
* Base: f4000000, Size: ac00000, Tag: 200
|
|
* Base: fec01000, Size: 13f000, Tag: 200
|
|
* Base: fed45000, Size: 4b000, Tag: 200
|
|
* Base: fed92000, Size: 26e000, Tag: 200
|
|
* Base: 471600000, Size: b8ea00000, Tag: 100200
|
|
PCI: 00:02.0 18 * [0x90000000 - 0x9fffffff] limit: 9fffffff prefmem
|
|
PCI: 00:02.0 10 * [0x8ec00000 - 0x8effffff] limit: 8effffff mem
|
|
PCI: 00:1c.2 20 * [0x8f000000 - 0x8f7fffff] limit: 8f7fffff mem
|
|
PCI: 00:1c.0 20 * [0x8ea00000 - 0x8eafffff] limit: 8eafffff mem
|
|
PCI: 00:1c.1 20 * [0x8eb00000 - 0x8ebfffff] limit: 8ebfffff mem
|
|
PCI: 00:19.0 10 * [0x8f800000 - 0x8f81ffff] limit: 8f81ffff mem
|
|
PCI: 00:14.0 10 * [0x8f820000 - 0x8f82ffff] limit: 8f82ffff mem
|
|
PCI: 00:04.0 10 * [0x8f830000 - 0x8f837fff] limit: 8f837fff mem
|
|
PCI: 00:1b.0 10 * [0x8f838000 - 0x8f83bfff] limit: 8f83bfff mem
|
|
PCI: 00:19.0 14 * [0x8f83c000 - 0x8f83cfff] limit: 8f83cfff mem
|
|
PCI: 00:1f.6 10 * [0x8f83d000 - 0x8f83dfff] limit: 8f83dfff mem
|
|
PCI: 00:1f.2 24 * [0x8f83e000 - 0x8f83e7ff] limit: 8f83e7ff mem
|
|
PCI: 00:1a.0 10 * [0x8f83f000 - 0x8f83f3ff] limit: 8f83f3ff mem
|
|
PCI: 00:1d.0 10 * [0x8f840000 - 0x8f8403ff] limit: 8f8403ff mem
|
|
PCI: 00:1f.3 10 * [0x8f841000 - 0x8f8410ff] limit: 8f8410ff mem
|
|
PCI: 00:16.0 10 * [0x8f842000 - 0x8f84200f] limit: 8f84200f mem
|
|
PCI: 00:1c.2 24 * [0x471600000 - 0x4815fffff] limit: 4815fffff prefmem
|
|
DOMAIN: 0000 mem: base: 0 size: 0 align: 0 gran: 0 limit: fffffffff done
|
|
PCI: 00:1c.0 mem: base: 8ea00000 size: 100000 align: 20 gran: 20 limit: 8eafffff
|
|
PCI: 00:1c.0: Resource ranges:
|
|
* Base: 8ea00000, Size: 100000, Tag: 200
|
|
PCI: 01:00.0 10 * [0x8ea00000 - 0x8ea000ff] limit: 8ea000ff mem
|
|
PCI: 00:1c.0 mem: base: 8ea00000 size: 100000 align: 20 gran: 20 limit: 8eafffff done
|
|
PCI: 00:1c.1 mem: base: 8eb00000 size: 100000 align: 20 gran: 20 limit: 8ebfffff
|
|
PCI: 00:1c.1: Resource ranges:
|
|
* Base: 8eb00000, Size: 100000, Tag: 200
|
|
PCI: 02:00.0 10 * [0x8eb00000 - 0x8eb03fff] limit: 8eb03fff mem
|
|
PCI: 00:1c.1 mem: base: 8eb00000 size: 100000 align: 20 gran: 20 limit: 8ebfffff done
|
|
PCI: 00:1c.2 io: base: 2000 size: 1000 align: 12 gran: 12 limit: 2fff
|
|
PCI: 00:1c.2: Resource ranges:
|
|
* Base: 2000, Size: 1000, Tag: 100
|
|
NONE 18 * [0x2000 - 0x2fff] limit: 2fff io
|
|
PCI: 00:1c.2 io: base: 2000 size: 1000 align: 12 gran: 12 limit: 2fff done
|
|
PCI: 00:1c.2 prefmem: base: 471600000 size: 10000000 align: 20 gran: 20 limit: 4815fffff
|
|
PCI: 00:1c.2: Resource ranges:
|
|
* Base: 471600000, Size: 10000000, Tag: 1200
|
|
NONE 14 * [0x471600000 - 0x4815fffff] limit: 4815fffff prefmem
|
|
PCI: 00:1c.2 prefmem: base: 471600000 size: 10000000 align: 20 gran: 20 limit: 4815fffff done
|
|
PCI: 00:1c.2 mem: base: 8f000000 size: 800000 align: 20 gran: 20 limit: 8f7fffff
|
|
PCI: 00:1c.2: Resource ranges:
|
|
* Base: 8f000000, Size: 800000, Tag: 200
|
|
NONE 10 * [0x8f000000 - 0x8f7fffff] limit: 8f7fffff mem
|
|
PCI: 00:1c.2 mem: base: 8f000000 size: 800000 align: 20 gran: 20 limit: 8f7fffff done
|
|
=== Resource allocator: DOMAIN: 0000 - resource allocation complete ===
|
|
PCI: 00:02.0 10 <- [0x008ec00000 - 0x008effffff] size 0x00400000 gran 0x16 mem64
|
|
PCI: 00:02.0 18 <- [0x0090000000 - 0x009fffffff] size 0x10000000 gran 0x1c prefmem64
|
|
PCI: 00:02.0 20 <- [0x0000001000 - 0x000000103f] size 0x00000040 gran 0x06 io
|
|
PCI: 00:04.0 10 <- [0x008f830000 - 0x008f837fff] size 0x00008000 gran 0x0f mem64
|
|
PCI: 00:14.0 10 <- [0x008f820000 - 0x008f82ffff] size 0x00010000 gran 0x10 mem64
|
|
PCI: 00:16.0 10 <- [0x008f842000 - 0x008f84200f] size 0x00000010 gran 0x04 mem64
|
|
PCI: 00:19.0 10 <- [0x008f800000 - 0x008f81ffff] size 0x00020000 gran 0x11 mem
|
|
PCI: 00:19.0 14 <- [0x008f83c000 - 0x008f83cfff] size 0x00001000 gran 0x0c mem
|
|
PCI: 00:19.0 18 <- [0x0000001040 - 0x000000105f] size 0x00000020 gran 0x05 io
|
|
PCI: 00:1a.0 10 <- [0x008f83f000 - 0x008f83f3ff] size 0x00000400 gran 0x0a mem
|
|
PCI: 00:1b.0 10 <- [0x008f838000 - 0x008f83bfff] size 0x00004000 gran 0x0e mem64
|
|
PCI: 00:1c.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 01 io
|
|
PCI: 00:1c.0 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 bus 01 prefmem
|
|
PCI: 00:1c.0 20 <- [0x008ea00000 - 0x008eafffff] size 0x00100000 gran 0x14 bus 01 mem
|
|
PCI: 01:00.0 10 <- [0x008ea00000 - 0x008ea000ff] size 0x00000100 gran 0x08 mem
|
|
PCI: 00:1c.1 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 02 io
|
|
PCI: 00:1c.1 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 bus 02 prefmem
|
|
PCI: 00:1c.1 20 <- [0x008eb00000 - 0x008ebfffff] size 0x00100000 gran 0x14 bus 02 mem
|
|
PCI: 02:00.0 10 <- [0x008eb00000 - 0x008eb03fff] size 0x00004000 gran 0x0e mem64
|
|
PCI: 00:1c.2 1c <- [0x0000002000 - 0x0000002fff] size 0x00001000 gran 0x0c bus 03 io
|
|
PCI: 00:1c.2 24 <- [0x0471600000 - 0x04815fffff] size 0x10000000 gran 0x14 bus 03 prefmem
|
|
PCI: 00:1c.2 20 <- [0x008f000000 - 0x008f7fffff] size 0x00800000 gran 0x14 bus 03 mem
|
|
NONE missing set_resources
|
|
PCI: 00:1d.0 10 <- [0x008f840000 - 0x008f8403ff] size 0x00000400 gran 0x0a mem
|
|
PNP: 00ff.1 missing set_resources
|
|
PNP: 00ff.2 missing set_resources
|
|
PCI: 00:1f.2 10 <- [0x0000001080 - 0x0000001087] size 0x00000008 gran 0x03 io
|
|
PCI: 00:1f.2 14 <- [0x0000001090 - 0x0000001093] size 0x00000004 gran 0x02 io
|
|
PCI: 00:1f.2 18 <- [0x0000001088 - 0x000000108f] size 0x00000008 gran 0x03 io
|
|
PCI: 00:1f.2 1c <- [0x0000001094 - 0x0000001097] size 0x00000004 gran 0x02 io
|
|
PCI: 00:1f.2 20 <- [0x0000001060 - 0x000000107f] size 0x00000020 gran 0x05 io
|
|
PCI: 00:1f.2 24 <- [0x008f83e000 - 0x008f83e7ff] size 0x00000800 gran 0x0b mem
|
|
PCI: 00:1f.3 10 <- [0x008f841000 - 0x008f8410ff] size 0x00000100 gran 0x08 mem64
|
|
PCI: 00:1f.6 10 <- [0x008f83d000 - 0x008f83dfff] size 0x00001000 gran 0x0c mem64
|
|
Done setting resources.
|
|
Done allocating resources.
|
|
BS: BS_DEV_RESOURCES run times (exec / console): 2 / 0 ms
|
|
Enabling resources...
|
|
PCI: 00:00.0 subsystem <- 8086/0154
|
|
PCI: 00:00.0 cmd <- 06
|
|
PCI: 00:02.0 subsystem <- 8086/0166
|
|
PCI: 00:02.0 cmd <- 03
|
|
PCI: 00:04.0 cmd <- 02
|
|
PCI: 00:14.0 subsystem <- 8086/1e31
|
|
PCI: 00:14.0 cmd <- 102
|
|
PCI: 00:16.0 subsystem <- 8086/1e3a
|
|
PCI: 00:16.0 cmd <- 02
|
|
PCI: 00:19.0 subsystem <- 17aa/21f3
|
|
PCI: 00:19.0 cmd <- 103
|
|
PCI: 00:1a.0 subsystem <- 8086/1e2d
|
|
PCI: 00:1a.0 cmd <- 102
|
|
PCI: 00:1b.0 subsystem <- 8086/1e20
|
|
PCI: 00:1b.0 cmd <- 102
|
|
PCI: 00:1c.0 bridge ctrl <- 0013
|
|
PCI: 00:1c.0 subsystem <- 8086/1e10
|
|
PCI: 00:1c.0 cmd <- 106
|
|
PCI: 00:1c.1 bridge ctrl <- 0013
|
|
PCI: 00:1c.1 subsystem <- 8086/1e12
|
|
PCI: 00:1c.1 cmd <- 106
|
|
PCI: 00:1c.2 bridge ctrl <- 0013
|
|
PCI: 00:1c.2 subsystem <- 8086/1e14
|
|
PCI: 00:1c.2 cmd <- 107
|
|
PCI: 00:1d.0 subsystem <- 8086/1e26
|
|
PCI: 00:1d.0 cmd <- 102
|
|
PCI: 00:1f.0 subsystem <- 8086/1e55
|
|
PCI: 00:1f.0 cmd <- 107
|
|
PCI: 00:1f.2 subsystem <- 8086/1e03
|
|
PCI: 00:1f.2 cmd <- 03
|
|
PCI: 00:1f.3 subsystem <- 8086/1e22
|
|
PCI: 00:1f.3 cmd <- 103
|
|
PCI: 00:1f.6 subsystem <- 8086/1e24
|
|
PCI: 00:1f.6 cmd <- 02
|
|
PCI: 01:00.0 subsystem <- 1180/e823
|
|
PCI: 01:00.0 cmd <- 06
|
|
PCI: 02:00.0 cmd <- 02
|
|
done.
|
|
Found TPM ST33ZP24 by ST Microelectronics
|
|
TPM: Startup
|
|
TPM: command 0x99 returned 0x0
|
|
TPM: Asserting physical presence
|
|
TPM: command 0x4000000a returned 0x0
|
|
TPM: command 0x65 returned 0x0
|
|
TPM: flags disable=0, deactivated=0, nvlocked=1
|
|
TPM: setup succeeded
|
|
BS: BS_DEV_INIT entry times (exec / console): 46 / 0 ms
|
|
Initializing devices...
|
|
CPU_CLUSTER: 0 init
|
|
MTRR: Physical address space:
|
|
0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6
|
|
0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0
|
|
0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6
|
|
0x0000000080000000 - 0x0000000090000000 size 0x10000000 type 0
|
|
0x0000000090000000 - 0x00000000a0000000 size 0x10000000 type 1
|
|
0x00000000a0000000 - 0x0000000100000000 size 0x60000000 type 0
|
|
0x0000000100000000 - 0x0000000471600000 size 0x371600000 type 6
|
|
0x0000000471600000 - 0x0000000481600000 size 0x10000000 type 0
|
|
MTRR: Fixed MSR 0x250 0x0606060606060606
|
|
MTRR: Fixed MSR 0x258 0x0606060606060606
|
|
MTRR: Fixed MSR 0x259 0x0000000000000000
|
|
MTRR: Fixed MSR 0x268 0x0606060606060606
|
|
MTRR: Fixed MSR 0x269 0x0606060606060606
|
|
MTRR: Fixed MSR 0x26a 0x0606060606060606
|
|
MTRR: Fixed MSR 0x26b 0x0606060606060606
|
|
MTRR: Fixed MSR 0x26c 0x0606060606060606
|
|
MTRR: Fixed MSR 0x26d 0x0606060606060606
|
|
MTRR: Fixed MSR 0x26e 0x0606060606060606
|
|
MTRR: Fixed MSR 0x26f 0x0606060606060606
|
|
CPU physical address size: 36 bits
|
|
MTRR: default type WB/UC MTRR counts: 12/10.
|
|
MTRR: UC selected as default type.
|
|
MTRR: 0 base 0x0000000000000000 mask 0x0000000f80000000 type 6
|
|
MTRR: 1 base 0x0000000090000000 mask 0x0000000ff0000000 type 1
|
|
MTRR: 2 base 0x0000000100000000 mask 0x0000000f00000000 type 6
|
|
MTRR: 3 base 0x0000000200000000 mask 0x0000000e00000000 type 6
|
|
MTRR: 4 base 0x0000000400000000 mask 0x0000000fc0000000 type 6
|
|
MTRR: 5 base 0x0000000440000000 mask 0x0000000fe0000000 type 6
|
|
MTRR: 6 base 0x0000000460000000 mask 0x0000000ff0000000 type 6
|
|
MTRR: 7 base 0x0000000470000000 mask 0x0000000fff000000 type 6
|
|
MTRR: 8 base 0x0000000471000000 mask 0x0000000fffc00000 type 6
|
|
MTRR: 9 base 0x0000000471400000 mask 0x0000000fffe00000 type 6
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
CPU has 4 cores, 8 threads enabled.
|
|
Setting up SMI for CPU
|
|
Will perform SMM setup.
|
|
CBFS: Found 'cpu_microcode_blob.bin' @0x132c0 size 0x6800 in mcache @0x7ffdd0ac
|
|
microcode: sig=0x306a9 pf=0x10 revision=0x21
|
|
CPU: Intel(R) Core(TM) i7-3615QE CPU @ 2.30GHz.
|
|
Setting up local APIC 0x0
|
|
Loading module at 0x00030000 with entry 0x00030000. filesize: 0x178 memsize: 0x178
|
|
Processing 18 relocs. Offset value of 0x00030000
|
|
Attempting to start 7 APs
|
|
Starting CPUs in xapic mode
|
|
Waiting for 10ms after sending INIT.
|
|
Waiting for SIPI to complete...
|
|
done.
|
|
Waiting for SIPI to complete...
|
|
Setting up local APIC 0x1
|
|
done.
|
|
AP: slot 1 apic_id 1, MCU rev: 0x00000021
|
|
Setting up local APIC 0x5
|
|
AP: slot 2 apic_id 5, MCU rev: 0x00000021
|
|
Setting up local APIC 0x4
|
|
AP: slot 3 apic_id 4, MCU rev: 0x00000021
|
|
Setting up local APIC 0x6
|
|
AP: slot 4 apic_id 6, MCU rev: 0x00000021
|
|
Setting up local APIC 0x3
|
|
Setting up local APIC 0x2
|
|
AP: slot 7 apic_id 3, MCU rev: 0x00000021
|
|
Setting up local APIC 0x7
|
|
AP: slot 6 apic_id 2, MCU rev: 0x00000021
|
|
AP: slot 5 apic_id 7, MCU rev: 0x00000021
|
|
smm_stub_place_stacks: cpus: 8 : stack space: needed -> 2000
|
|
smm_stub_place_stacks: exit, stack_top 0x80002000
|
|
Loading module at 0x00038000 with entry 0x00038000. filesize: 0x1e8 memsize: 0x1e8
|
|
Processing 11 relocs. Offset value of 0x00038000
|
|
smm_module_setup_stub: stack_end = 0x80000000
|
|
smm_module_setup_stub: stack_top = 0x80002000
|
|
smm_module_setup_stub: stack_size = 0x400
|
|
smm_module_setup_stub: runtime.start32_offset = 0x4c
|
|
smm_module_setup_stub: runtime.smm_size = 0x10000
|
|
SMM Module: stub loaded at 0x00038000. Will call 0x7ff9f5c1
|
|
Installing permanent SMM handler to 0x80000000
|
|
smm_load_module: total_smm_space_needed 8fe8, available -> 300000
|
|
Loading module at 0x802fa000 with entry 0x802fa768. filesize: 0x1fa0 memsize: 0x5fe8
|
|
Processing 93 relocs. Offset value of 0x802fa000
|
|
smm_load_module: smram_start: 0x0x80000000
|
|
smm_load_module: smram_end: 0x80300000
|
|
smm_load_module: stack_top: 0x80002000
|
|
smm_load_module: handler start 0x802fa768
|
|
smm_load_module: handler_size 6fd0
|
|
smm_load_module: fxsave_area 0x802ff000
|
|
smm_load_module: fxsave_size 1000
|
|
smm_load_module: CONFIG_MSEG_SIZE 0x0
|
|
smm_load_module: CONFIG_BIOS_RESOURCE_LIST_SIZE 0x0
|
|
smm_load_module: handler_mod_params.smbase = 0x80000000
|
|
smm_load_module: per_cpu_save_state_size = 0x400
|
|
smm_load_module: num_cpus = 0x8
|
|
smm_load_module: total_save_state_size = 0x2000
|
|
smm_load_module: cpu0 entry: 0x802ea000
|
|
smm_create_map: cpus allowed in one segment 30
|
|
smm_create_map: min # of segments needed 1
|
|
CPU 0x0
|
|
smbase 802ea000 entry 802f2000
|
|
ss_start 802f9c00 code_end 802f21e8
|
|
CPU 0x1
|
|
smbase 802e9c00 entry 802f1c00
|
|
ss_start 802f9800 code_end 802f1de8
|
|
CPU 0x2
|
|
smbase 802e9800 entry 802f1800
|
|
ss_start 802f9400 code_end 802f19e8
|
|
CPU 0x3
|
|
smbase 802e9400 entry 802f1400
|
|
ss_start 802f9000 code_end 802f15e8
|
|
CPU 0x4
|
|
smbase 802e9000 entry 802f1000
|
|
ss_start 802f8c00 code_end 802f11e8
|
|
CPU 0x5
|
|
smbase 802e8c00 entry 802f0c00
|
|
ss_start 802f8800 code_end 802f0de8
|
|
CPU 0x6
|
|
smbase 802e8800 entry 802f0800
|
|
ss_start 802f8400 code_end 802f09e8
|
|
CPU 0x7
|
|
smbase 802e8400 entry 802f0400
|
|
ss_start 802f8000 code_end 802f05e8
|
|
smm_stub_place_stacks: cpus: 8 : stack space: needed -> 2000
|
|
smm_stub_place_stacks: exit, stack_top 0x80002000
|
|
Loading module at 0x802f2000 with entry 0x802f2000. filesize: 0x1e8 memsize: 0x1e8
|
|
Processing 11 relocs. Offset value of 0x802f2000
|
|
smm_place_entry_code: smbase 802e8400, stack_top 80002000
|
|
SMM Module: placing smm entry code at 802f1c00, cpu # 0x1
|
|
smm_place_entry_code: copying from 802f2000 to 802f1c00 0x1e8 bytes
|
|
SMM Module: placing smm entry code at 802f1800, cpu # 0x2
|
|
smm_place_entry_code: copying from 802f2000 to 802f1800 0x1e8 bytes
|
|
SMM Module: placing smm entry code at 802f1400, cpu # 0x3
|
|
smm_place_entry_code: copying from 802f2000 to 802f1400 0x1e8 bytes
|
|
SMM Module: placing smm entry code at 802f1000, cpu # 0x4
|
|
smm_place_entry_code: copying from 802f2000 to 802f1000 0x1e8 bytes
|
|
SMM Module: placing smm entry code at 802f0c00, cpu # 0x5
|
|
smm_place_entry_code: copying from 802f2000 to 802f0c00 0x1e8 bytes
|
|
SMM Module: placing smm entry code at 802f0800, cpu # 0x6
|
|
smm_place_entry_code: copying from 802f2000 to 802f0800 0x1e8 bytes
|
|
SMM Module: placing smm entry code at 802f0400, cpu # 0x7
|
|
smm_place_entry_code: copying from 802f2000 to 802f0400 0x1e8 bytes
|
|
smm_module_setup_stub: stack_end = 0x80000000
|
|
smm_module_setup_stub: stack_top = 0x80002000
|
|
smm_module_setup_stub: stack_size = 0x400
|
|
smm_module_setup_stub: runtime.start32_offset = 0x4c
|
|
smm_module_setup_stub: runtime.smm_size = 0x300000
|
|
SMM Module: stub loaded at 0x802f2000. Will call 0x802fa768
|
|
Initializing southbridge SMI...
|
|
smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802ea000, cpu = 0
|
|
In relocation handler: cpu 0
|
|
New SMBASE=0x802ea000 IEDBASE=0x80400000
|
|
Writing SMRR. base = 0x80000006, mask=0xff800800
|
|
Relocation complete.
|
|
microcode: Update skipped, already up-to-date
|
|
smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802e9c00, cpu = 1
|
|
In relocation handler: cpu 1
|
|
New SMBASE=0x802e9c00 IEDBASE=0x80400000
|
|
Writing SMRR. base = 0x80000006, mask=0xff800800
|
|
Relocation complete.
|
|
microcode: Update skipped, already up-to-date
|
|
smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802e9000, cpu = 4
|
|
In relocation handler: cpu 4
|
|
New SMBASE=0x802e9000 IEDBASE=0x80400000
|
|
Writing SMRR. base = 0x80000006, mask=0xff800800
|
|
Relocation complete.
|
|
microcode: Update skipped, already up-to-date
|
|
smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802e8c00, cpu = 5
|
|
In relocation handler: cpu 5
|
|
New SMBASE=0x802e8c00 IEDBASE=0x80400000
|
|
Writing SMRR. base = 0x80000006, mask=0xff800800
|
|
Relocation complete.
|
|
microcode: Update skipped, already up-to-date
|
|
smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802e9800, cpu = 2
|
|
In relocation handler: cpu 2
|
|
New SMBASE=0x802e9800 IEDBASE=0x80400000
|
|
Writing SMRR. base = 0x80000006, mask=0xff800800
|
|
Relocation complete.
|
|
microcode: Update skipped, already up-to-date
|
|
smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802e9400, cpu = 3
|
|
In relocation handler: cpu 3
|
|
New SMBASE=0x802e9400 IEDBASE=0x80400000
|
|
Writing SMRR. base = 0x80000006, mask=0xff800800
|
|
Relocation complete.
|
|
microcode: Update skipped, already up-to-date
|
|
smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802e8800, cpu = 6
|
|
In relocation handler: cpu 6
|
|
New SMBASE=0x802e8800 IEDBASE=0x80400000
|
|
Writing SMRR. base = 0x80000006, mask=0xff800800
|
|
Relocation complete.
|
|
microcode: Update skipped, already up-to-date
|
|
smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802e8400, cpu = 7
|
|
In relocation handler: cpu 7
|
|
New SMBASE=0x802e8400 IEDBASE=0x80400000
|
|
Writing SMRR. base = 0x80000006, mask=0xff800800
|
|
Relocation complete.
|
|
microcode: Update skipped, already up-to-date
|
|
Initializing CPU #0
|
|
CPU: vendor Intel device 306a9
|
|
CPU: family 06, model 3a, stepping 09
|
|
CPU: Intel(R) Core(TM) i7-3615QE CPU @ 2.30GHz.
|
|
CPU: platform id 4
|
|
CPU: cpuid(1) 0x306a9
|
|
CPU: AES supported
|
|
CPU: TXT supported
|
|
CPU: VT supported
|
|
Setting up local APIC 0x0
|
|
VMX status: enabled
|
|
IA32_FEATURE_CONTROL status: locked
|
|
cpu: energy policy set to 6
|
|
model_x06ax: frequency set to 2300
|
|
Turbo is available but hidden
|
|
Turbo is available and visible
|
|
CPU #0 initialized
|
|
Initializing CPU #1
|
|
Initializing CPU #7
|
|
Initializing CPU #6
|
|
CPU: vendor Intel device 306a9
|
|
CPU: vendor Intel device 306a9
|
|
CPU: family 06, model 3a, stepping 09
|
|
CPU: family 06, model 3a, stepping 09
|
|
Initializing CPU #3
|
|
Initializing CPU #2
|
|
CPU: vendor Intel device 306a9
|
|
CPU: family 06, model 3a, stepping 09
|
|
CPU: vendor Intel device 306a9
|
|
CPU: family 06, model 3a, stepping 09
|
|
CPU: vendor Intel device 306a9
|
|
CPU: family 06, model 3a, stepping 09
|
|
Initializing CPU #4
|
|
Initializing CPU #5
|
|
CPU: vendor Intel device 306a9
|
|
CPU: family 06, model 3a, stepping 09
|
|
CPU: vendor Intel device 306a9
|
|
CPU: family 06, model 3a, stepping 09
|
|
CPU: Intel(R) Core(TM) i7-3615QE CPU @ 2.30GHz.
|
|
CPU: Intel(R) Core(TM) i7-3615QE CPU @ 2.30GHz.
|
|
CPU: platform id 4
|
|
CPU: platform id 4
|
|
CPU: cpuid(1) 0x306a9
|
|
CPU: cpuid(1) 0x306a9
|
|
CPU: AES supported
|
|
CPU: TXT supported
|
|
CPU: VT supported
|
|
CPU: AES supported
|
|
CPU: TXT supported
|
|
CPU: VT supported
|
|
Setting up local APIC 0x4
|
|
Setting up local APIC 0x5
|
|
VMX status: enabled
|
|
VMX status: enabled
|
|
IA32_FEATURE_CONTROL status: locked
|
|
IA32_FEATURE_CONTROL status: locked
|
|
CPU: Intel(R) Core(TM) i7-3615QE CPU @ 2.30GHz.
|
|
CPU: Intel(R) Core(TM) i7-3615QE CPU @ 2.30GHz.
|
|
CPU: platform id 4
|
|
CPU: platform id 4
|
|
CPU: cpuid(1) 0x306a9
|
|
CPU: cpuid(1) 0x306a9
|
|
CPU: AES supported
|
|
CPU: TXT supported
|
|
CPU: VT supported
|
|
CPU: AES supported
|
|
CPU: TXT supported
|
|
CPU: VT supported
|
|
Setting up local APIC 0x3
|
|
Setting up local APIC 0x2
|
|
VMX status: enabled
|
|
VMX status: enabled
|
|
IA32_FEATURE_CONTROL status: locked
|
|
IA32_FEATURE_CONTROL status: locked
|
|
CPU: Intel(R) Core(TM) i7-3615QE CPU @ 2.30GHz.
|
|
cpu: energy policy set to 6
|
|
cpu: energy policy set to 6
|
|
CPU: Intel(R) Core(TM) i7-3615QE CPU @ 2.30GHz.
|
|
CPU: Intel(R) Core(TM) i7-3615QE CPU @ 2.30GHz.
|
|
CPU: platform id 4
|
|
CPU: platform id 4
|
|
CPU: cpuid(1) 0x306a9
|
|
CPU: cpuid(1) 0x306a9
|
|
CPU: AES supported
|
|
CPU: TXT supported
|
|
CPU: VT supported
|
|
CPU: AES supported
|
|
CPU: TXT supported
|
|
CPU: VT supported
|
|
Setting up local APIC 0x6
|
|
CPU: platform id 4
|
|
cpu: energy policy set to 6
|
|
cpu: energy policy set to 6
|
|
model_x06ax: frequency set to 2300
|
|
model_x06ax: frequency set to 2300
|
|
CPU #2 initialized
|
|
CPU #3 initialized
|
|
CPU: cpuid(1) 0x306a9
|
|
VMX status: enabled
|
|
Setting up local APIC 0x7
|
|
IA32_FEATURE_CONTROL status: locked
|
|
VMX status: enabled
|
|
model_x06ax: frequency set to 2300
|
|
CPU #7 initialized
|
|
model_x06ax: frequency set to 2300
|
|
CPU #6 initialized
|
|
IA32_FEATURE_CONTROL status: locked
|
|
CPU: AES supported
|
|
CPU: TXT supported
|
|
CPU: VT supported
|
|
Setting up local APIC 0x1
|
|
VMX status: enabled
|
|
IA32_FEATURE_CONTROL status: locked
|
|
cpu: energy policy set to 6
|
|
model_x06ax: frequency set to 2300
|
|
CPU #4 initialized
|
|
cpu: energy policy set to 6
|
|
model_x06ax: frequency set to 2300
|
|
CPU #5 initialized
|
|
cpu: energy policy set to 6
|
|
model_x06ax: frequency set to 2300
|
|
CPU #1 initialized
|
|
bsp_do_flight_plan done after 29 msecs.
|
|
Initializing southbridge SMI...
|
|
SMI_STS:
|
|
GPE0_STS: GPIO14 GPIO11 GPIO9 GPIO7 GPIO5 GPIO4 GPIO3 GPIO0
|
|
ALT_GP_SMI_STS: GPI14 GPI13 GPI11 GPI10 GPI9 GPI7 GPI6 GPI5 GPI4 GPI3 GPI1 GPI0
|
|
TCO_STS:
|
|
Locking SMM.
|
|
CPU_CLUSTER: 0 init finished in 43 msecs
|
|
PCI: 00:00.0 init
|
|
Disabling PEG12.
|
|
Disabling PEG11.
|
|
Disabling PEG10.
|
|
Disabling PEG60.
|
|
Disabling Device 7.
|
|
Disabling PEG IO clock.
|
|
Set BIOS_RESET_CPL
|
|
CPU TDP: 45 Watts
|
|
PCI: 00:00.0 init finished in 1 msecs
|
|
PCI: 00:02.0 init
|
|
CBFS: Found 'vbt.bin' @0x42140 size 0x599 in mcache @0x7ffdd1ec
|
|
Found a VBT of 4281 bytes after decompression
|
|
GMA: Found VBT in CBFS
|
|
GMA: Found valid VBT in CBFS
|
|
GT Power Management Init
|
|
IVB GT2 35W Power Meter Weights
|
|
GT Power Management Init (post VBIOS)
|
|
PCI: 00:02.0 init finished in 0 msecs
|
|
PCI: 00:04.0 init
|
|
PCI: 00:04.0 init finished in 0 msecs
|
|
PCI: 00:14.0 init
|
|
XHCI: Setting up controller.. done.
|
|
PCI: 00:14.0 init finished in 0 msecs
|
|
PCI: 00:16.0 init
|
|
ME: FW Partition Table : OK
|
|
ME: Bringup Loader Failure : NO
|
|
ME: Firmware Init Complete : NO
|
|
ME: Manufacturing Mode : YES
|
|
ME: Boot Options Present : NO
|
|
ME: Update In Progress : NO
|
|
ME: Current Working State : Initializing
|
|
ME: Current Operation State : Bring up
|
|
ME: Current Operation Mode : Debug or Disabled by AltDisableBit
|
|
ME: Error Code : No Error
|
|
ME: Progress Phase : BUP Phase
|
|
ME: Power Management Event : Clean Moff->Mx wake
|
|
ME: Progress Phase State : Check to see if straps say ME DISABLED
|
|
intel_me_path: mbp is not ready!
|
|
ME: BIOS path: Error
|
|
ME: me_state=1, me_state_prev=3
|
|
PCI: 00:16.0: Disabling device
|
|
PCI: 00:16.0 init finished in 0 msecs
|
|
PCI: 00:19.0 init
|
|
PCI: 00:19.0 init finished in 0 msecs
|
|
PCI: 00:1a.0 init
|
|
EHCI: Setting up controller.. done.
|
|
PCI: 00:1a.0 init finished in 0 msecs
|
|
PCI: 00:1b.0 init
|
|
Azalia: base = 0x8f838000
|
|
Azalia: codec_mask = 09
|
|
Azalia: Initializing codec #3
|
|
Azalia: codec viddid: 80862806
|
|
Azalia: verb_size: 16
|
|
Azalia: verb loaded.
|
|
Azalia: Initializing codec #0
|
|
Azalia: codec viddid: 10ec0269
|
|
Azalia: verb_size: 76
|
|
Azalia: verb loaded.
|
|
PCI: 00:1b.0 init finished in 5 msecs
|
|
PCI: 00:1c.0 init
|
|
Initializing PCH PCIe bridge.
|
|
PCI: 00:1c.0 init finished in 0 msecs
|
|
PCI: 00:1c.1 init
|
|
Initializing PCH PCIe bridge.
|
|
PCI: 00:1c.1 init finished in 0 msecs
|
|
PCI: 00:1c.2 init
|
|
Initializing PCH PCIe bridge.
|
|
PCI: 00:1c.2 init finished in 0 msecs
|
|
PCI: 00:1d.0 init
|
|
EHCI: Setting up controller.. done.
|
|
PCI: 00:1d.0 init finished in 0 msecs
|
|
PCI: 00:1f.0 init
|
|
pch: lpc_init
|
|
PCH: detected QM77, device id: 0x1e55, rev id 0x4
|
|
IOAPIC: Initializing IOAPIC at 0xfec00000
|
|
IOAPIC: ID = 0x02
|
|
IOAPIC: 24 interrupts
|
|
IOAPIC: Clearing IOAPIC at 0xfec00000
|
|
IOAPIC: Bootstrap Processor Local APIC = 0x00
|
|
Set power off after power failure.
|
|
NMI sources enabled.
|
|
PantherPoint PM init
|
|
RTC: failed = 0x0
|
|
RTC Init
|
|
apm_control: Disabling ACPI.
|
|
APMC done.
|
|
pch_spi_init
|
|
PCI: 00:1f.0 init finished in 0 msecs
|
|
PCI: 00:1f.2 init
|
|
SATA: Initializing...
|
|
SATA: Controller in AHCI mode.
|
|
ABAR: 0x8f83e000
|
|
PCI: 00:1f.2 init finished in 0 msecs
|
|
PCI: 00:1f.3 init
|
|
PCI: 00:1f.3 init finished in 0 msecs
|
|
PCI: 00:1f.6 init
|
|
PCI: 00:1f.6 init finished in 0 msecs
|
|
PCI: 01:00.0 init
|
|
PCI: 01:00.0 init finished in 0 msecs
|
|
PCI: 02:00.0 init
|
|
PCI: 02:00.0 init finished in 0 msecs
|
|
PNP: 00ff.2 init
|
|
PNP: 00ff.2 init finished in 0 msecs
|
|
smbus: PCI: 00:1f.3[0]->I2C: 01:54 init
|
|
I2C: 01:54 init finished in 0 msecs
|
|
smbus: PCI: 00:1f.3[0]->I2C: 01:55 init
|
|
I2C: 01:55 init finished in 0 msecs
|
|
smbus: PCI: 00:1f.3[0]->I2C: 01:56 init
|
|
I2C: 01:56 init finished in 0 msecs
|
|
smbus: PCI: 00:1f.3[0]->I2C: 01:57 init
|
|
I2C: 01:57 init finished in 0 msecs
|
|
smbus: PCI: 00:1f.3[0]->I2C: 01:5c init
|
|
Locking EEPROM RFID
|
|
init EEPROM done
|
|
I2C: 01:5c init finished in 25 msecs
|
|
smbus: PCI: 00:1f.3[0]->I2C: 01:5d init
|
|
I2C: 01:5d init finished in 0 msecs
|
|
smbus: PCI: 00:1f.3[0]->I2C: 01:5e init
|
|
I2C: 01:5e init finished in 0 msecs
|
|
smbus: PCI: 00:1f.3[0]->I2C: 01:5f init
|
|
I2C: 01:5f init finished in 0 msecs
|
|
Devices initialized
|
|
BS: BS_DEV_INIT run times (exec / console): 77 / 1 ms
|
|
Finalize devices...
|
|
PCI: 00:1f.0 final
|
|
flash size 0xc00000 bytes
|
|
SF: Detected 00 0000 with sector size 0x1000, total 0xc00000
|
|
apm_control: Finalizing SMM.
|
|
APMC done.
|
|
Devices finalized
|
|
CBFS: Found 'fallback/dsdt.aml' @0x3e880 size 0x3859 in mcache @0x7ffdd1c0
|
|
CBFS: 'fallback/slic' not found.
|
|
ACPI: Writing ACPI tables at 7ff49000.
|
|
ACPI: * FACS
|
|
ACPI: * DSDT
|
|
ACPI: * FADT
|
|
ACPI: added table 1/32, length now 40
|
|
ACPI: * SSDT
|
|
Found 1 CPU(s) with 8 core(s) each.
|
|
PSS: 2301MHz power 45000 control 0x2100 status 0x2100
|
|
PSS: 2300MHz power 45000 control 0x1700 status 0x1700
|
|
PSS: 2000MHz power 37775 control 0x1400 status 0x1400
|
|
PSS: 1800MHz power 33184 control 0x1200 status 0x1200
|
|
PSS: 1600MHz power 28804 control 0x1000 status 0x1000
|
|
PSS: 1400MHz power 24624 control 0xe00 status 0xe00
|
|
PSS: 1200MHz power 20584 control 0xc00 status 0xc00
|
|
PSS: 2301MHz power 45000 control 0x2100 status 0x2100
|
|
PSS: 2300MHz power 45000 control 0x1700 status 0x1700
|
|
PSS: 2000MHz power 37775 control 0x1400 status 0x1400
|
|
PSS: 1800MHz power 33184 control 0x1200 status 0x1200
|
|
PSS: 1600MHz power 28804 control 0x1000 status 0x1000
|
|
PSS: 1400MHz power 24624 control 0xe00 status 0xe00
|
|
PSS: 1200MHz power 20584 control 0xc00 status 0xc00
|
|
PSS: 2301MHz power 45000 control 0x2100 status 0x2100
|
|
PSS: 2300MHz power 45000 control 0x1700 status 0x1700
|
|
PSS: 2000MHz power 37775 control 0x1400 status 0x1400
|
|
PSS: 1800MHz power 33184 control 0x1200 status 0x1200
|
|
PSS: 1600MHz power 28804 control 0x1000 status 0x1000
|
|
PSS: 1400MHz power 24624 control 0xe00 status 0xe00
|
|
PSS: 1200MHz power 20584 control 0xc00 status 0xc00
|
|
PSS: 2301MHz power 45000 control 0x2100 status 0x2100
|
|
PSS: 2300MHz power 45000 control 0x1700 status 0x1700
|
|
PSS: 2000MHz power 37775 control 0x1400 status 0x1400
|
|
PSS: 1800MHz power 33184 control 0x1200 status 0x1200
|
|
PSS: 1600MHz power 28804 control 0x1000 status 0x1000
|
|
PSS: 1400MHz power 24624 control 0xe00 status 0xe00
|
|
PSS: 1200MHz power 20584 control 0xc00 status 0xc00
|
|
PSS: 2301MHz power 45000 control 0x2100 status 0x2100
|
|
PSS: 2300MHz power 45000 control 0x1700 status 0x1700
|
|
PSS: 2000MHz power 37775 control 0x1400 status 0x1400
|
|
PSS: 1800MHz power 33184 control 0x1200 status 0x1200
|
|
PSS: 1600MHz power 28804 control 0x1000 status 0x1000
|
|
PSS: 1400MHz power 24624 control 0xe00 status 0xe00
|
|
PSS: 1200MHz power 20584 control 0xc00 status 0xc00
|
|
PSS: 2301MHz power 45000 control 0x2100 status 0x2100
|
|
PSS: 2300MHz power 45000 control 0x1700 status 0x1700
|
|
PSS: 2000MHz power 37775 control 0x1400 status 0x1400
|
|
PSS: 1800MHz power 33184 control 0x1200 status 0x1200
|
|
PSS: 1600MHz power 28804 control 0x1000 status 0x1000
|
|
PSS: 1400MHz power 24624 control 0xe00 status 0xe00
|
|
PSS: 1200MHz power 20584 control 0xc00 status 0xc00
|
|
PSS: 2301MHz power 45000 control 0x2100 status 0x2100
|
|
PSS: 2300MHz power 45000 control 0x1700 status 0x1700
|
|
PSS: 2000MHz power 37775 control 0x1400 status 0x1400
|
|
PSS: 1800MHz power 33184 control 0x1200 status 0x1200
|
|
PSS: 1600MHz power 28804 control 0x1000 status 0x1000
|
|
PSS: 1400MHz power 24624 control 0xe00 status 0xe00
|
|
PSS: 1200MHz power 20584 control 0xc00 status 0xc00
|
|
PSS: 2301MHz power 45000 control 0x2100 status 0x2100
|
|
PSS: 2300MHz power 45000 control 0x1700 status 0x1700
|
|
PSS: 2000MHz power 37775 control 0x1400 status 0x1400
|
|
PSS: 1800MHz power 33184 control 0x1200 status 0x1200
|
|
PSS: 1600MHz power 28804 control 0x1000 status 0x1000
|
|
PSS: 1400MHz power 24624 control 0xe00 status 0xe00
|
|
PSS: 1200MHz power 20584 control 0xc00 status 0xc00
|
|
Generating ACPI PIRQ entries
|
|
\_SB.PCI0.LPCB.TPM.TPM: LPC TPM PNP: 0c31.0
|
|
ACPI: * H8
|
|
H8: BDC detection not implemented. Assuming BDC installed
|
|
H8: WWAN not installed
|
|
\_SB.PCI0.RP02.WF00: PCI: 02:00.0
|
|
ACPI: added table 2/32, length now 44
|
|
ACPI: * MCFG
|
|
ACPI: added table 3/32, length now 48
|
|
ACPI: * TCPA
|
|
TCPA log created at 0x7ff39000
|
|
ACPI: added table 4/32, length now 52
|
|
ACPI: * MADT
|
|
ACPI: added table 5/32, length now 56
|
|
current = 7ff4f690
|
|
ACPI: * DMAR
|
|
ACPI: added table 6/32, length now 60
|
|
current = 7ff4f750
|
|
ACPI: * HPET
|
|
ACPI: added table 7/32, length now 64
|
|
ACPI: done.
|
|
ACPI tables: 26512 bytes.
|
|
smbios_write_tables: 7ff38000
|
|
Create SMBIOS type 16
|
|
Create SMBIOS type 17
|
|
Create SMBIOS type 20
|
|
PCI: 02:00.0 (unknown)
|
|
SMBIOS tables: 1167 bytes.
|
|
Writing table forward entry at 0x00000500
|
|
Wrote coreboot table at: 0x00000500, 0x10 bytes, checksum afe7
|
|
Writing coreboot table at 0x7ff6d000
|
|
CBFS: Found 'cmos_layout.bin' @0x42880 size 0x7dc in mcache @0x7ffdd244
|
|
0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
|
|
1. 0000000000001000-000000000009ffff: RAM
|
|
2. 00000000000a0000-00000000000fffff: RESERVED
|
|
3. 0000000000100000-000000007ff37fff: RAM
|
|
4. 000000007ff38000-000000007ff87fff: CONFIGURATION TABLES
|
|
5. 000000007ff88000-000000007ffcefff: RAMSTAGE
|
|
6. 000000007ffcf000-000000007fffffff: CONFIGURATION TABLES
|
|
7. 0000000080000000-000000008e9fffff: RESERVED
|
|
8. 00000000f0000000-00000000f3ffffff: RESERVED
|
|
9. 00000000fed40000-00000000fed44fff: RESERVED
|
|
10. 00000000fed90000-00000000fed91fff: RESERVED
|
|
11. 0000000100000000-00000004715fffff: RAM
|
|
Wrote coreboot table at: 0x7ff6d000, 0xba4 bytes, checksum a30d
|
|
coreboot table: 3004 bytes.
|
|
IMD ROOT 0. 0x7ffff000 0x00001000
|
|
IMD SMALL 1. 0x7fffe000 0x00001000
|
|
CONSOLE 2. 0x7ffde000 0x00020000
|
|
RO MCACHE 3. 0x7ffdd000 0x00000524
|
|
TIME STAMP 4. 0x7ffdc000 0x00000910
|
|
MEM INFO 5. 0x7ffdb000 0x000003b8
|
|
ROMSTG STCK 6. 0x7ffda000 0x00001000
|
|
AFTER CAR 7. 0x7ffcf000 0x0000b000
|
|
RAMSTAGE 8. 0x7ff87000 0x00048000
|
|
SMM BACKUP 9. 0x7ff77000 0x00010000
|
|
4f444749 10. 0x7ff75000 0x00002000
|
|
COREBOOT 11. 0x7ff6d000 0x00008000
|
|
ACPI 12. 0x7ff49000 0x00024000
|
|
TCPA TCGLOG13. 0x7ff39000 0x00010000
|
|
SMBIOS 14. 0x7ff38000 0x00001000
|
|
IMD small region:
|
|
IMD ROOT 0. 0x7fffec00 0x00000400
|
|
FMAP 1. 0x7fffeb20 0x000000e0
|
|
ROMSTAGE 2. 0x7fffeb00 0x00000004
|
|
ACPI GNVS 3. 0x7fffea00 0x00000100
|
|
BS: BS_WRITE_TABLES run times (exec / console): 29 / 0 ms
|
|
CBFS: Found 'fallback/payload' @0x71940 size 0x11887 in mcache @0x7ffdd32c
|
|
Checking segment from ROM address 0xff4a1b6c
|
|
Payload being loaded at below 1MiB without region being marked as RAM usable.
|
|
Checking segment from ROM address 0xff4a1b88
|
|
Loading segment from ROM address 0xff4a1b6c
|
|
code (compression=1)
|
|
New segment dstaddr 0x000dedc0 memsize 0x21240 srcaddr 0xff4a1ba4 filesize 0x1184f
|
|
Loading Segment: addr: 0x000dedc0 memsz: 0x0000000000021240 filesz: 0x000000000001184f
|
|
using LZMA
|
|
Loading segment from ROM address 0xff4a1b88
|
|
Entry Point 0x000fd25b
|
|
BS: BS_PAYLOAD_LOAD run times (exec / console): 33 / 0 ms
|
|
ICH-NM10-PCH: watchdog disabled
|
|
Jumping to boot code at 0x000fd25b(0x7ff6d000)
|
|
SeaBIOS (version rel-1.16.0-4-gdc88f9b)
|
|
BUILD: gcc: (coreboot toolchain v2021-11-02_6dad77d64a) 11.2.0 binutils: (GNU Binutils) 2.37
|
|
Found coreboot cbmem console @ 7ffde000
|
|
Found mainboard LENOVO ThinkPad X230t
|
|
Relocating init from 0x000e0520 to 0x7ef2aaa0 (size 54464)
|
|
Found CBFS header at 0xff43022c
|
|
multiboot: eax=7ffb88b8, ebx=7ffb8884
|
|
boot order:
|
|
1: /pci@i0cf8/*@1f,2/drive@0/disk@0
|
|
2: /pci@i0cf8/*@1f,2/drive@2/disk@0
|
|
3: /pci@i0cf8/*@1f,2/drive@1/disk@0
|
|
4: /rom@floppyimg/FreeDOS
|
|
5: /rom@img/coreinfo
|
|
6: /rom@img/memtest
|
|
7: /rom@img/nvramcui
|
|
8: /rom@img/tint
|
|
9: /rom@img/coreDOOM
|
|
10:
|
|
Found 17 PCI devices (max PCI bus is 03)
|
|
Copying SMBIOS from 0x7ff38000 to 0x000f67c0
|
|
Copying SMBIOS 3.0 from 0x7ff38020 to 0x000f67a0
|
|
Copying ACPI RSDP from 0x7ff49000 to 0x000f6770
|
|
table(50434146)=0x7ff4caf0 (via xsdt)
|
|
Using pmtimer, ioport 0x508
|
|
table(41504354)=0x7ff4f5c0 (via xsdt)
|
|
Scan for VGA option rom
|
|
Running option rom at c000:0003
|
|
Turning on vga text mode console
|
|
SeaBIOS (version rel-1.16.0-4-gdc88f9b)
|
|
Machine UUID 83a08581-43e8-11cb-a224-de250b8c7867
|
|
PCI: XHCI at 00:14.0 (mmio 0x8f820000)
|
|
XHCI init: regs @ 0x8f820000, 8 ports, 32 slots, 32 byte contexts
|
|
XHCI protocol USB 2.00, 4 ports (offset 1), def 3001
|
|
XHCI protocol USB 3.00, 4 ports (offset 5), def 1000
|
|
XHCI extcap 0xc1 @ 0x8f828040
|
|
XHCI extcap 0xc0 @ 0x8f828070
|
|
XHCI extcap 0x1 @ 0x8f828330
|
|
EHCI init on dev 00:1a.0 (regs=0x8f83f020)
|
|
EHCI init on dev 00:1d.0 (regs=0x8f840020)
|
|
AHCI controller at 00:1f.2, iobase 0x8f83e000, irq 11
|
|
Searching bootorder for: /pci@i0cf8/pci-bridge@1c/*@0
|
|
Searching bootorder for: /pci@i0cf8/*@1f,2/drive@2/disk@0
|
|
AHCI/2: Set transfer mode to UDMA-6
|
|
Searching bios-geometry for: /pci@i0cf8/*@1f,2/drive@2/disk@0
|
|
AHCI/2: registering: "AHCI/2: KINGSTON SUV500MS240G ATA-11 Hard-Disk (223 GiBytes)"
|
|
XHCI no devices found
|
|
Mapping floppy floppyimg/FreeDOS to addr 0x7edb8000
|
|
Searching bootorder for: /rom@floppyimg/FreeDOS
|
|
Searching bootorder for: HALT
|
|
Found 0 lpt ports
|
|
Found 0 serial ports
|
|
Searching bootorder for: /rom@img/memtest
|
|
Searching bootorder for: /rom@img/tint
|
|
Searching bootorder for: /rom@img/nvramcui
|
|
Searching bootorder for: /rom@img/coreinfo
|
|
USB keyboard initialized
|
|
Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/hub@3/storage@4/*@0/*@0,0
|
|
Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/hub@3/usb-*@4
|
|
USB MSC vendor='Sony' product='USB HS-CF Card' rev='5.23' type=0 removable=1
|
|
Device reports MEDIUM NOT PRESENT - 2 tries left
|
|
Device reports MEDIUM NOT PRESENT - 1 tries left
|
|
Device reports MEDIUM NOT PRESENT - 0 tries left
|
|
scsi_is_ready returned -1
|
|
Unable to configure USB MSC drive.
|
|
Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/hub@3/storage@4/*@0/*@0,1
|
|
Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/hub@3/usb-*@4
|
|
USB MSC vendor='Sony' product='USB HS-xD/SM' rev='5.23' type=0 removable=1
|
|
Device reports MEDIUM NOT PRESENT - 2 tries left
|
|
Device reports MEDIUM NOT PRESENT - 1 tries left
|
|
Device reports MEDIUM NOT PRESENT - 0 tries left
|
|
scsi_is_ready returned -1
|
|
Unable to configure USB MSC drive.
|
|
Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/hub@3/storage@4/*@0/*@0,2
|
|
Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/hub@3/usb-*@4
|
|
USB MSC vendor='Sony' product='USB HS-MS Card' rev='5.23' type=0 removable=1
|
|
Device reports MEDIUM NOT PRESENT - 2 tries left
|
|
Device reports MEDIUM NOT PRESENT - 1 tries left
|
|
Device reports MEDIUM NOT PRESENT - 0 tries left
|
|
scsi_is_ready returned -1
|
|
Unable to configure USB MSC drive.
|
|
Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/hub@3/storage@4/*@0/*@0,3
|
|
Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/hub@3/usb-*@4
|
|
USB MSC vendor='Sony' product='USB HS-SD Card' rev='5.23' type=0 removable=1
|
|
Device reports MEDIUM NOT PRESENT - 2 tries left
|
|
Device reports MEDIUM NOT PRESENT - 1 tries left
|
|
Device reports MEDIUM NOT PRESENT - 0 tries left
|
|
scsi_is_ready returned -1
|
|
Unable to configure USB MSC drive.
|
|
Unable to configure USB MSC device.
|
|
Initialized USB HUB (0 ports used)
|
|
Initialized USB HUB (0 ports used)
|
|
WARNING - Timeout at ps2_recvbyte:182!
|
|
Searching bootorder for: /pci@i0cf8/*@1f,2/drive@0/disk@0
|
|
AHCI/0: Set transfer mode to UDMA-6
|
|
Searching bios-geometry for: /pci@i0cf8/*@1f,2/drive@0/disk@0
|
|
AHCI/0: registering: "AHCI/0: KINGSTON SKC6001024G ATA-10 Hard-Disk (953 GiBytes)"
|
|
Discarding ps2 data aa (status=11)
|
|
WARNING - Timeout at ps2_recvbyte:182!
|
|
PS2 keyboard initialized
|
|
Searching bootorder for: /pci@i0cf8/*@1f,2/drive@1/disk@0
|
|
AHCI/1: Set transfer mode to UDMA-6
|
|
Searching bios-geometry for: /pci@i0cf8/*@1f,2/drive@1/disk@0
|
|
AHCI/1: registering: "AHCI/1: ST2000LM015-2E8174 ATA-10 Hard-Disk (1863 GiBytes)"
|
|
WARNING - Timeout at ehci_wait_td:517!
|
|
ehci pipe=0x7edb3a80 cur=7edaddc0 tok=80080d80 next=7edade00 td=0x7edaddc0 status=80080d80
|
|
Initialized USB HUB (1 ports used)
|
|
All threads complete.
|
|
Scan for option roms
|
|
Running option rom at cf80:0003
|
|
pmm call arg1=1
|
|
pmm call arg1=0
|
|
pmm call arg1=1
|
|
pmm call arg1=0
|
|
Searching bootorder for: /pci@i0cf8/*@19
|
|
|
|
Press ESC for boot menu.
|
|
|
|
Turning on vga text mode console
|
|
SeaBIOS (version rel-1.16.0-4-gdc88f9b)
|
|
Machine UUID 83a08581-43e8-11cb-a224-de250b8c7867
|
|
Searching bootorder for: HALT
|
|
drive 0x000f6680: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=2000409264
|
|
drive 0x000f6700: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=468862128
|
|
drive 0x000f6630: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=3907029168
|
|
Space available for UMB: d0800-ec000, f5fe0-f6630
|
|
Returned 16699392 bytes of ZoneHigh
|
|
e820 map has 11 items:
|
|
0: 0000000000000000 - 000000000009fc00 = 1 RAM
|
|
1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
|
|
2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
|
|
3: 0000000000100000 - 000000007edb8000 = 1 RAM
|
|
4: 000000007edb8000 - 000000007ef20000 = 2 RESERVED
|
|
5: 000000007ef20000 - 000000007ff25000 = 1 RAM
|
|
6: 000000007ff25000 - 000000008ea00000 = 2 RESERVED
|
|
7: 00000000f0000000 - 00000000f4000000 = 2 RESERVED
|
|
8: 00000000fed40000 - 00000000fed45000 = 2 RESERVED
|
|
9: 00000000fed90000 - 00000000fed92000 = 2 RESERVED
|
|
10: 0000000100000000 - 0000000471600000 = 1 RAM
|
|
enter handle_19:
|
|
NULL
|
|
Booting from Hard Disk...
|
|
Booting from 0000:7c00
|
