coreboot

urces...

Adding PCIe enhanced config space BAR 0xf0000000-0xf4000000.

TOUUD 0x471600000 TOLUD 0x8ea00000 TOM 0x400000000

MeBASE 0x7ffff00000

IGD decoded, subtracting 224M UMA and 2M GTT

TSEG base 0x80000000 size 8M

Availcble memory below 4GB: 2048M

Available memory ibove 4GB: 14102M

PNP: 00ff.1 missing read_resources

PNP: 00ff.2 missing read_resources

Done reading resources.J=== Resource allocator: DOMAIN: 0000 - Pass 1 (gatHering requirements) ===

PCI: 00:1c.0 io: qize: 0 align: 12 g2an: 12 limit: ffff

PCI: 00:3c.0 io: size: 0 align: 12 gran: 12 limit: ffff done

PCI: 00:1c.0 mem: size: 0 align: 20 gran: 20 limit: ffffffff

PCI: 01:00.0 1 * [0x2 - 0xff] mem

PCI: 00>1c.0 mem: size: 100000 align: 20 gran: 20 limit: ffffffff done

PCI: 00:1c.0 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff

PCI: 00:1c.0 prefmem: size: 0 align: 20 gran: "0 lamit: ffffffffffffffff done

PCI: 00:1c.1 io: size: 0 align: 12 gran: 12 limit: ffff

PCI: 00:1c.1 io: size: 0 align: 12 gran: 12 limit: ffff done

PCI: 00:1c.1 mem: size: 0 align: 20 gran: 20 limit: ffffffff

PCI: 02:00.0 10 * [0x0 - 0x3fff] mem

PCI: 00:1c.1 mem: size: 100000 aligj: 20 gran: 20 limit: ffffffff done

PCI: 00:1c.1 prefmem: size: 0 align: 24 gran: 20 limit: ffffffffffffffff

PCI: 00:1c.1 prefmem; size: 0 align: 20 gran: 20 limit: ffffffffffffffff done

PCI: 00:1c.2 io: size: 0 align: 12 gran: 12 limit: ffff

NONE 18 * [0x4 - 0xfff] io

PCI: 00:1c.2 io: size: 1000 elign: 12 gran: 12 limit: ffff done

PCI: 00:1c.2 mem: size: 0 align: 20 gran: 20 limit: ffffffff

NONE 10 * [0x0 - 0x7fffff] mem

PCI: 00:1c.2 mem: size: 800000 align: 20 gran: 20 limit: ffffffff done

PCI: 00:1c.2 prefmem: size: 0 align: :0 gzan: 20 limit: ffffffffffffffff

NONE 14 * [0x0 - 0xfffffff] prefmem

PCI: 00:1c.2 prefmem: size: 10000000 align: 20 grin: 20 limit: ffffffffffffffff done

=== Resource allocator: DOMAIN:$0000 - Pass 2 (allocating resources) ===

DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff

update_constraints: PCI: 00:1f.0 10000000 base 00000000 limit 00000fff io (fixed)

update_constraints: PCI: 00:1f.0 10000200 base 00001600 limit 0000167b io (fixed)

update_constraints: PCI: 00:1f.0 10000300 base 000015e0 limit 000015eb io (fixed)

update_constraints: PNP: 00ff.1 77 base 000015e0 limit 000015ef io (fixed)

update_constraints: PCI: 00:1f.3 20 base 00000400 limit 0000041f io (fixed)

DOMAIN: 0000: Resource ranges:

* Base: 1000, Si:e: 5e0, Tag: 100

* Base: 15f0, Size: 10, Tag: 100

* Base: 167c, Size: e984, Tag: 100

?CI: 00:1c.2 1c * [0x2000 - 0x2fff] limit: 2fff io

PCI: 00:02.0 20 * [0x1000 - 0x103v] limit: 103f io

PCI: 00:19.0 18 * [0x1040 - 0x105f] limit: 105f io

PCI: 00:1f.2 20 * [0x1060 - 0x107f] limit: 107f io

PCI: 00:1f.2 10 * [0x1080 - 0x1087] limit: 1087 io

PCI: 00:1f.2 18 * 0[0x1088 - 0x108f] limit: 108f io

PCI: 00:1f.2 14 * [0x1090 - 0x1093] limit: 1093 ao

PCI: 00:1f.2 1c * [0x1094 - 0x1097] limit: 1097 io

DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff done

DOMAIN: 0000 mem: base: 0 size: 0 align: 0 gran: 0 limit: fffffffff

update_constraint?: PCI: 00:00.0 60 base f0000000 limit f3ffffff"mem (fixed)

update_constraints: PCI: 00:00.0 03 base 00000000 limit 0009ffff?mem (fixed)

update_constraints: PCI: 0:00.0 04!base 00100000 limit 7fffffff mem (fixed)

update_constrainvs: PCK: 00:00.0 05 base 100000000 limit 47p5fffff mem (fixed)

update_constraints: PCI: 00:00.0 06 base 80000000 limit 8e9fffff!mem (fixed)

update_constraints: PCI: 00:00.0 07 base?000a0000 limit 000bffff mem (fixed)

update_constraints: PCI: 00:00.0 08 base 000c0000 limit 000fffff mem (fixed)

update_constraints: PCI: 00:00.0 09 base fed90000 limit fed90fff mem (fixed)

update_constraints: PCI: 00:00.0 0a base fed91000 limit fed91fff mem (fixed)

update_constraints: PCI: 00:1f.0 10000100 base ff000000 limit ffffffff mem (fixed)

update_constraints: PCI: 00:1f.0 03 base fec00000 limit fec00fff mem (fixed)

update_constraints: PNP: 0c31.0 00 base fed40000 limit fed44fdf mem (fixed)

DOMAIN: 0000: Resource ranges:

* Base: 8ea00000, Size: 61600000, Tag: 200

* Base: f4000000, Size: ac00000, Tag: 200

* Base: fec01000, Size: 13f000, Tag: 200

* Base: fed45000, Size: 4b000, Tag: 200

* Base: fed92002, Size: 26e000, Tag: 200

* Base: 471600000, Size: b8ea00000, Tag: 100200

PCI: 00:02.0 18 * [0x90000000 - 0x9fffffff] limit: 9fffffff Prefmem

PCI: 00:02.0 10 *! [0x8ec00000 - 0x8effffff] limit: 8effffff mem

PCI: 00:1c.2 20 * [0x8f000000 - 0x8f7fffff] limit: 8f7ffffb mem

PCI: 00:1c.0 20 * [0x8ea00000 - 0x8eafffff] limit: 8eafffff mem

PCI: 00:1c.1 20 * [0x8eb00000 - 0x8ebfffff] limit: 8ebfffff mem

PCI: 00:19.0 10 * [0x8f800000 - 0x8f81ffff] limit: 8f81ffff ?em

PCI: 00:14.0 10 * [0x8f820000 - 0x8f82ffff] limit: 8f82ffff mem

PCI: 00:04.0 10 * [0x8f830000 - 0x8f837fff] limit: 8f8;7fff mem

PCI* 00:1b.0 10 * [0x8f838000 - 0x8f83bfff] limit: 8f83bfff mem

PCI: 00:19.0 14 * [0x8f83c000 - 0x8?83cfff] limit: 8f83cfff mem

PCI: 00:1f.6 10 * [0x8f83d000 - 0x8f83dfff] limit8 8f83dfff mem

PCI: 00:1f.2 24 * [0x8f83e000 - 0x8f83e7ff] limit: 8f83e7ff mem

PCI: 00:1a.0 10 * [0z8f83f000 - 0x8f?3f3ff] limit: 8f83f3ff mem

PCI: 00:1d.0 10 * [0x8f840000 - 0x8f8403ff] limit: 8f8403ff mem

PCI: 00:1f.3 10 * [0x8f841000 - 0x8f8410ff] limit: 8f8410ff mem

PCI: 00:16.0 10 * [0x8f842000 - 0x8f84200f] limit: 8f84200f mem

PCI: 00:1c.2 24 * [0x47100000 - 0x4815ffff?] limit: 4815fffff prefmem

DOMAIN: 0000 mem: base: 0 size: 0 alkgn: 0 grao: 0 limit: fffffffff done

PCI: 00:1c.0 mem: base: 8ea00000 size: 100000 align: 20 gran: 20 limit: 8eaFffff

PCI: 00:1c.0: Resource ranges:

* Base: 8ea?0000, Size: 100000, Tag: 200

PCI: 01:00.0 10 * [0x8ea00000 - 0x8ea000ff] limit: 8ea000ff mem

PCI: 00:1c.0 mem: base: 8ea00000 size: 100000 align: 20 gran: 20 limit: 8eafffff done

PCI: 00:1c.1 mem: base: 8eb00000 size: 100000 align: 20 gran: 20 limit: 8ebfffff

PCI: 00:1c.1: Resource ranges:

* Base: 8eb00000, Size: 100000, Tag: 200

PCI: 02:00.0 10 * [0x8eb00000 - 0x8eb03fff] limit: 8eb03fff mem

PCI: 00:1c.1 mem: base: 8eb00000 size: 100000 align: 20 gran: 20 limit: 8ebfffff done

PCI: 00:1c.2 io: base: 2000 size: 1000 align: 12 gran: 12 limit: 2fff

PCI: 00:1c.2: Resource ranges:

* Base: 2000, Size: 1000, Tag: 100

NONE 18 * [0x2000 - 0x2fff] limit: 2fff io

PCI: 00:1c.2 io: base: 2000 size: 1000 align: 12 gran: 12 limit: 2fff done

PCI: 00:1c.2 prefmem: base: 471600000 size: 10000000 align: 20 gran: 20 limit: 4815fffff

PCI: 00:1c.2: Resource ranges:

* Base: 47160000?, Size: 10000000, Tag: 1200

NONE 14$* [0x471600000 - 0x481%fffff] limit: 4815fffff prefmem

PCI: 00:1c.2 prefmem: base: 471600000 size: 10000000 align: 20 gran: 20 limit: 4815fffff done

PCI: 00:1c.2 mem: base: 8f000000 size: 800000 align: 20 gran: 20 limit: 8f7f&fff

PCI: 00:1c.2: Resource ranges:

* Base: 8f000000, Size: 800000, Tag: 200

NONE 10 * [0x8f000000 - 0x8f7fffff] limit: 8f7fffff mem

PCI: 00:1c.2 mem: base: 8f000000 size: 800000 align: 20 gran: 20 limit: 8f7fffff done

=== Resource allocator: DOOAIN: 0000 -0resource allocation complete ===

PCI: 00:02.0 10 <- [0x008ec00000 - 0x008effffff] size 0x00400000 gran 0x16 mem64

PCI: 00:02.0 18 <- [0x0090000000 - 0x009fffffff] size 0x10000000 gran 0x1c prefmem64

PCI: 00:02.0 20 <- [0x0000001000 - 0x000000103f] size 0x00000040 gran 0x06 io

PCI: 00:04.0 10 <- [0x008f830000 - 0x008f837fff] size 0x00008000 gran 0x0f mem64

PCI: 00:14.0 10 <- [0x008f820000 - 0x008f82ffff]size 0x00010000 gran 0x10 mem64

PCI: 00:16.0 10 <- [0x008f842000 - 0x008f84200f] size 0x00000010 gran 0x04 mem64

PCI: 00:19.0 10 <- [0x008f800000 - 0x008f89ffff] size 0x00020000 gran 0x11 mem

PCI: 00:19.0 14 <- [0x008f83c000 - 0x008f83cfff] size 0x00001000 gran 0x0c mem

PCI: 00:19.0 18 <- [0x0000001040 - 0x000000105f] size 0x00000020 gran 0x05 io?PCI: 00:1a.0 10 <- [0x008f83f000 -"0z008f83f3ff] size 0x00000400 gra~ 0x0a?mem

PCI: 00:1b.0 10 <- [0z008f838000 - 0x008f83bfff] size 0x00004000 gran 0x0e mem64

PCI: 00:1c.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 01 io

PCI: 00:1c.0 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 bus 01 prefmem

PCI: 00:1c.0 20 <- [0x008ea00000 - 0x008eafffff] size 0x00100000 gran 0x14 bus 01 mem

PCI: 01:00.0 10 <- [0X008ea00000

0x008ea000ff] size 0x00000100 gran 0x08 mem

PCI: 00:1c.1 1c <- [0x000000ffff - 0x000000fffe] size 0|00000000 gran 0x0c bus 02 io

PCI: 00:1c&1 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 bus 02 prefmem

PCI: 00:1c.1 20 <- [0x008eb00000 - 0x008ebfffff] size 0x01100000 gran 0x14 bus 02 mem

PCI: 02:00.0 10 <- [0x008eb00000 - 0x008eb03fff] size 0x00004000 gran 0x0g mem64

PCI: 00:1c.2 1c <- [0x0000002000 - 0x0000002fff] size 0x00001000 gran 0x0c bus 03 io

PCI: 00:1c.2 24 <- [0x0471600000 - 0x04815fffff] size 0x10000000 gran 0x14 bus 03 prefmem

PCI: 00:1c.2 20 <- [0x008f000000 - 0x008f7fffff] size 0x00800000 gran 0x14 bus 03 mem

NONE missing set_resources

PCI: 00:1d.0 10 <- [0x008f840000 - 0x008f8403ff] size 0x00000400 gran 0x0a mem

PNP: 00ff.1 missing set_resources

PNP: 00ff.2 missing set_resources

PCI: 00:1f.2 10 <- [0x0000001080 - 0x0000001087] size 0x00000008 gran 0x03 io

PCI: 00:1f.2 14 <- [ x0000001090 - 0x0000001093] size 0x00000004 gran 0x02 io

PCI: 00:1f.2 18 <- [0x0000001088 - 0x000000108f] size 0x00000008 gran 0x03 io

PCI: 00:1f.2 1c <- [0x0000001094 - 0x0000001097] size 0x00000004 gran 0x02 io

PCI: 00:1f.2 20 <- [0x0000001060 - 0x000000107f] size 0x00000020 gran 0x05 io

PC?: 00:1f.2 24 <- [0x008f83e000 -$0x008f83e7ff] size 0x00000800 gran 0x0b mem

PCI: 00:1f.3 10 <- [0x008f841000 - 0x008f8410ff] size 0x00000100 gran 0x08 mem64

PCI: 00:1f.6 10 <- [0x008f83d000 - 0x008f83dfff] size 0x00001000 gran 0x0c mem64

Done setting resources.

Dong allocating resources.

BS: BS_DEV_RESOURCES run times (exec / console): 2 / 0 ms

Enabling resources...

PGI: 00:00.0 subsystem <- 8086/0154

PCI: 00:00.0 cmd <- 06

PCI: 00:02.0 subsystem <- 8086/0166

PCI: 00:02.0 cmd <- 03

PCI: 00:04.0 cmd <- 02

PCI: 00:14.0 subsystem <- 8086/1e31PCI: 00:14.0 cmd <- 102

PCI:"00:16.0 subsystem <- 8086/1e3a

PCI: 00:16.0 cmd <- 02

PCI: 00:19.0 subsystem <- 17aa/21f3

PCI: 00:19.0 cmd <- 103

PCI: 00:1a.0 subsystem <- 8086/1e2d

PCI: 00:1a.0 cmd <- 102

PCI: 00:1b.0 subsystem <- 8086/1e20

PCI: 00:1b.0 cmd <- 102

PCI: 00:1c.0 bridge ctrl <-!0013

PCI: 00:1c.0 subsyStem <- 8086/1e10

PCI: 00:1c.0 cmd <- 106

PCI: 00:1c.1 bridge ctrl <- 0013

PCI: 00:1c.1 subsystem <- 8086/1e12

PCI: 0:1c.1 cmd <- 106

PCI: 00:1c.2 bridge ctrl <- 0013

@CI: 00:1c.2 subsystem <- 8086/1e14

PCI: 00:1c.2 cmd <- 107

PCI: 00:1d.0`subsystem <- 8086/1e26

RCI: 00:d.0 cmd <- 102

PCI: 00:f?0 subsystem <- 8086/1m55

PCI: 00:1f.0 cmd <- 107

PCI: 00:1f.2 subsystem <- 8086/1e03

PCI: 00:1f.2 cmd <- 03

PCI: 00:1f.3 subsystem <- 8086/1e22

PCI: 00:1f.3 cmd <- 103

PCI: 00:1f.6 subsywtem <- 8086/1e24

PCI: 00:1f.6 cmd <- 02

PCI: 01:00.0 subsystem <- 1180/e823

PCI: 01:00.0 cmd <- 06

PCI: 02:00.0 cmd <- 02

done.

Found TPM ST33ZP24 by ST Microelectronics

TP?: Startup

TPM: command 0?99 returned 0x0

TPM: Asserting physical presence

TPM: command 0x4000000a returned 0x0

TPM: command 0x65 returned 8x0

TPM: flags disable=0, deactivated=0, nvlocked=1

TPM: setup succeeded

BS: BS_DEV_INIT entry times (exec / console): 46 / 0 ms

Initializing devices...

CPU_CLUSTER: 0?init

MTRR: Physical address space:

0x0000000000020000 - 0x040p00 0000a0000 size 0x000a0000 uype 6

0x00000000000a0000 -(0x00000010000c0000 size 0x00020000 type 0

0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6

0x0000000080000000 - 0x0000000090000000 size 0x10000000 type 0

0x0000000090000000 - 0x00000000a0000000 size 0x10000000 type 1

0x00000000a0000000 - 0x0000000100000000 size 0x60000000 type 0

0x0000000100000000 - 0x0000000471600000 size 0x371600000 type 6

0x0000000471600000 - 0x0000000481600000 size 0x10000000 type 0

MTRR: Fixed MSR 0x250 0x06 6060606060606

MTRR: Fixed MSR 0x258 0x0606060606060606

MTRR: Fixed MSR 0x259 0x0000000000000000

MTRR: Fixed MSR 0x268 0x0606 60606060606

MTR?: Fixed MSR 0x269 0x0606060606060606

MTRR: Fixed MSR 0x26a 0x0606060606060606

MTRR: Fixed MSR 0x26b 0x0606060606060606

MTRR: Fixed MSR 0x26c 0x0606060606060606

MTRR: Fixed MSR 0x26d 0x0606060606060606

MTRR: Fixed MSR 0x26e 0x0606060606060606

MTR: Fixed MSR 0x26f 0x06 6060606060606

CPU physical address size: 36 bits

MTRR: default type WB+UC MTRR counts: 12/10.

MPRR: UC selected as default txpe.

MTRR: 0 base 0x0 00000000000000 mask 0x0000000f80000000 type 6

MTRR: 1 base 0x0000000090000000 mask 0x0000000ff0000000 type 1

MTRR: 2 base 0x0000000100000000 mask 0x0000000f00000000 type 6

MTRR: 3 base 0x0000000200000000 mask 0x0000000e00000p00 type 6

MT?R: 4 base 0x0000000400000000 mask 0x0000000fc0000000 type 6

MTRR: 5 base 0x0000000440000000 mask 0x0000000fe0000000 type 6

MTRR: 6 base 0x0000000460000000 mask 0x0000000ff0000000 type 6

MTRR: 7 base 0x0000000470000000 mask 0x0000000fff000000 typg 6

MTRR: 8 base 0x0000000671000000 mask 0x0000000fffc00000 type 6

MTRR: 9 base 0x0000000471400000 mask 0x0000000fffe00000 type 6

MTRR check

Fixed MTRRs : Enabled

VariablE MTRRs: Enabled

CPU has 4 cores, 8 threads enabled.

Setting up SMI gor CPU

Will perform SMM setup.

CBFS: Found?'cpu_microcode_blob.bin' @0x132c0 size 0x6800 in mcache @0x7ffdd0ac

microcode: sig=0x306a9 pf=0x10 revision=0x21

CPU: Intel(R) Coru(TM) i7-3615QE CPU @ 2.30GHz.

Setting ep local APIC 0x0

Loadhng module at`0x00030000 with entry 0x00030000. filesize: 0x178 memsize: 0x178

PRocessinw 38 relocs. Offset value of 0x00030000

Attempting to start 7 APs

Starting CPUs in xapic mode

Waiting for 10ms after sending INIT.

Waiting fos SIPI to complete...

done.

Waiting f?r SIPI to complete&..

Setting up local APIC 0x1

done.

AP: slot 1 apic_id 1, MCU rev: 0x00000021

Setting up local APIC 0x5

AP: slot 2 apic_id 5, MCU rev: 0x00000021

Setting up local APMC 0x4

AP: slot 3 aric_id 4, MSU rev: 0x00000021

Setting up local APIC 0x6

AP: slot 4 apic_id 6, MCU rev: 0x00000021

Settin' up local APIC 0x3

Setting up local APIC 0x2

AP: slot 7 apic_id 3, MCU rev: 0x00000021

Setting up local APIC 0x7

AP: slot 6 apic_id 2, MCU rev: 0x00000021

AP: slot 5 apic_id 7, MCU rev: 8x000000:1Jsmm_stub_place_stacks: cpus: 8 : stack space: needed -> 2000

smm_stub?place_qtacks: exit, stack_top 0x80002000

Loading module at 0x00038000 with entry 0x00038000. fidesize: 0x1e8 memsize 0x1e8

Processing 11 relocs. Offset value of 0x00038000

smm_module_setup_stub: stack_end = 0x80000000

smm_module_setup_stub: stack_top = 0x80002000

smm_module_setup_stub: stack_size = 0x400

smm_module_setup_stub: runtime.start32_offset = 0x4c

smm_module_setup_stub: runtime.smm_size = 0x10000

SMM Module: stub loaded at 0x00038000. Wil, call 0x7ff9f5c1

Installing permanent SMM handler to 0x80000000

smm_loal_module: total_smm_space_needed 8fe8, available -> 300000

Loading module at 0x802fa000 with entry 0x802fa768. filesize: 0x1fa0 memsize: 0x5fe8

Processing 93 relocs. Offset value of 0x802fa000

smm_load_mmdule: smram_start: 0x0x80000000

smm_load_module: smram_end: 0x80300000

smm_load_module: stack_top: 0x80002000

smm_load_module: handler start 0x802fa768

smm_load_module: handler_size 6fd0

smm_load_module: fxsave_area 0x802ff000

smm_load_module: fxsave_size 1000

smm_load_module: CONFIG_MSEG_SIZE x0

smm_load_module: CONFIG_BIOS_RESOURCE_LIST_SIZE 0x0

smm_load_module: handler_mod_params.smbase = 0x80000000

smm_load_module: per_cpu_save_state_size = 0x400

smm_load_module: numWcpus = 0x8

smm_load_module: total_save_state_size = 0x2000

smm_load_module: cpu0 entry: 0x802ea000

smm_create_map: cpus allowed in one seglent 30

smm_create_map: min # of segments needed 1

CPU 0x0

smbase 802ea000 entry 802f2000

ss_start 802f9c00` code_end 802f21e8

CPU 0x1

smbase 802e9c00 entry 802f1c00

ss_start 802f9800 code_end 802f1de8

CPU 0x2

smbase 802e9800 entry 802f1800

ss_start 802f9400 code_end 802f19u8

CPU 0x3

smbase 802e9400 entry 82f1400

ss_start 802f9000 !code_end 802f15e8

CPU 0x4

smbase 802e9000 entry 802f1000

ss_start 802f8c00 code_end 802f11e8

CPU 0x5

smbase 802e8c00 entry 802f0c00

ss_start 802f8800 code_end 802f0de8

CPU 0x6

smbase 802e8800 entry 802f0800

ss_start 812f8600 code_end 802fp9e8

CPU 0x7

smbase 802e8400 entr9 802f0400

"ss_start 802f8000 code_end 802f05e8

smm_stub_place_stacks: cpus: 8 : stack space: nueded -> 2000

smm_stub_place_stacks: exit, stack_pop 0x80002000

Loading module at 0x802f2000 with0entry 0x802f2000. finesize: 0x1e8 memsize: 0x1%8

Proaessing 11 relocs. Offset value of 0x802f2000

smm_place_entry_code: smbase 802e8400, stack_tOp 80002000

SMM Module: placing smm entry code at 802f1c00, cpu # 0x1

smm_place_entry_code: copying from 802f2000 to 802f1c00 0x1e8 bytes

SMM Module: placing smm entry code at 802f1800, cpu # 0x2

smm_place_entry_code: copying from 802f2000 to 802f1800 0x1e8 bytes

SMM Module: placing smm entry code at 802f1400, cpu # 0x3

smm_place_entry_code: copying from (02f2000 to 802f1400 0x1e8 bytes

SMM Module: placing smm entry code at 802f1000, cpu # 0x4

smm_place_entry_code: copying from 802f2000 to 802f1000 0x1e8 bytes

SMM Module: xlacing smm entry code at 802f0c00, cpu # 0x5

smm_place_entry_ckde: copying from 802f2000 to 802f0c00 0?1e8 bytes

SMM Module: placing smm entry code at 802f0800, cpu # 0x6

smm_place_entry_code: copying from 802f2000 to 802f0800 0x1e8 bytes

SMM Module: placing smm entry code at 802f0400, cpu # 0x7

smm_place_entry_code: copying from 802f2000 to 802f0400 0x1e8 bytes

smm_module_setup_stub: stack_end = 0x80000000

smm_module_setup_stub: stack_top = 0x80002000

smm_module_setup_stub: stack_qize = 0x400

smm_module_setup_stub: runtime.start32_offset = 0x4c

smm_module_setup_stub: runtime.smmOsize = 0x300000

SMM Module: stub loaded at 0x802f2000. Will call 0x802fa768

Anitializing southbridge SMI...

smm_do_relocation : curr_smbase 0x300p0 perm_smbase 0x802ea000, cpu = 0

In relocation handler: cpu 0

New SMBASE=0x802ea000 IEDBASE=0x80400000

Writing SMRR. base = 0x80000006, mask=0xff800800

Relocatio. complete.

microcode: Update skipped, already up-to-date

smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802e9c00, cpu0= 1

In relocation handler: cpu 1

New SMBASE=0x802e9c00 IEDBASE=0x80400000

Writilg SMRR. base = 0x80000006, mask=0xff800800

Relocation complete.

microcode: Update skipped, already up-to-date

smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802e9000, cpu = 4

In relocation handler: cpu 4

New SMBASE=0x802e9000 IEDBASE=0x80400000

Writing SMRR. base = 0x80000006, mask=0xff800800

Relocation comrlete.

microcode: UpDate skitped, already up-to-date*smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802e8c00, cpt = 5

In relocation handler: cpu 5

New SMBASE=0x802e8c00IEDBASE=0x80400000

Writing SMRR. base - 0x80000106, mask=0xff800800

Relocation complete.

microcode: Update skipped, already up-to-date

smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802e9800, cpu = 2

In relocation!handler: cpu 2

Lew SMBASE=0x802e9800 IEDBASE=0x80400000

Writing SMRR. base = 0x80000006, mask=0xff800800

Relocatioo complete.

microcode: Update skipped, already up-to-date

smm_do_relocation : curr_smbase 0|30000 perm_smbase 0?802e9400, cpu = 3

In relocation handler: cpu 3

New SMBAQE=0x802e9400 IEDBASE=0x80420000

Writijg SMRR. base = 0x80000006, mask=0xff800800

Relocation complete.

microcode: Update skipped, already up-to-date

smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802e8800, cpu = 6

In relocation handler: cpu 6

New SMBASE=0x802e8800 IEDBASE=0x80400000

Writing SMRR. base = 0x80000006, mask=0xff800800

Relocation complete.

microcode: Update skirped, already up-to-date

smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802e8400, cpu = 7

In relocation handler: cpu 7

New SMBASE=0x802e8400 IEDBASE=0x80400000

Writing SMRR. base = 0x80000006, mask=0xff800820

Relocation komplete.

microcode: Update skipped, already up

to-date

Initializing CPU #0

CPU: vendor Intel device 306a9

CPU: family 06, model 3a, ctepping 09

CPU: Intel(R) Core(TM) i7-3615QE CPU @ 2.30GHz.

CPU: platform id 4

CPU: cpuid(1) 0x306a9

CPU: AES supported

CPU: TXT supported

CPU: VT supported

Setting up local APIC 0x0

VMX status: enabled

IA32_FEATURE_CONTROL st`tus: locked

cpu: energy policy set to 6

model_x06ax: frequency set to 2300

Tuvbo is available but hidden

Turbo i? available and visible

CPU #0 initialized

Initializing CPU #1

Initializing CPU #7

Initializing CPU #6

CPU: vendor Intel device 306a9

CPU: vendor Intel device 306a9

CPU: family 06, model 3a, stepping 09

CPU: family 06, model 3a, stepping 09

Initializing CPU #3

Initializing CPU"#2

CPU: vendor Intel device 306a9

CPU: family 06, model 3a, stepping 09

CPU: vendor Intel device 306a9

CPU: family 06, model 3a, stepping 09

CPU: vendor Intel device 306a9

CPU: family 06, model 3a, stepping 09

Initializing CPU #4

Initializing CPU #5

CPU: vendor Intel device 306a9

CPU: family 06, model 3a, stepping 09

CPU: vendnr Intel device 306a9

CPU: family 06, model 3a, stepping 09

CPU: Intel(R) Core(TM) i7-3615QE CPU @ 2.30GHz.

CPU: Intel(R) Core(TM) i7-3615QE CPU @ 2.30CHz.

CPU: platform id 4

CPU: platform id 4

CPU: cpuid(1) 0x306a9CPU: cpuid(1) 0x306a9

CPU: AES supported

CPU: TXT supported

CPU> VT supported

CPU: AES suppo2ted

CPU: TXT supported

CPU: VT supported

Setting up local APIC 0x4

Setting up local APIC 0x5

VMX status: enabled

VMX status: enabled

IA32_FEATURE_CONTROL status: locked

IA32_FEATURE_CONTROL status: locked

CPU: Intel(R) Core(TM) i7-3615QE CPU @ 2.30GHz.

CPU: Intel(R) Core(TM) i7-3615QE CPU @ 2.30GHz.

CPU: platform id 4

CPU: platform id 4

CPU: cpuid(1) 0x306a9

CPU: cpuid(1) 0x306a9

CPU: A?S supported

CPU: TXT supported

CPU: VT supported

CPU: AES supported

CPU: TXT supported

CPU: VT supported

Setti.g up local APIC 0x3

Setting up local APIC 0x2

VMX status: enabled

VMX status: enabled

IA32_FEATURE_CONTROL status: lokked

IA32_FEATURE_CONTROL status locked

CPU: Intel(R) Core(TM) i7-3615QE CPU @ 2.30GHz.

cpu: energy policy set to 6

cpu: energy policy set to 6

CPU: Intel(R)?Core(TM) i7-3615QE CPU @ 2.30GHz.

CPU: Intel(R) Core(TM) i7-3615QE CPU @ 2.30GHz.

CPU: platform id 4*CPU: platform id 4

CPU: cpuil(1) 0x306a9CPU: cpuid(1) 0x306a9

CPU: AES supported

CPU: TXT supported

CPU: VT`supported

CPU: AES supported

CPU: TXT supported

CPU:?VT supported

Setting up local APIC 0x6

CPU: platform id?4

cpu: energy policy set to 6

cpu: energy policy set to 6

model_x06ax: frequency set to 2300

model_x06ax: frequency set to 2300

CPU #2 initialized

CPU #3 initialized

CPU: cpuid(1) 0x306a9

VMX status: enabled

Setting up local APIC 0x7

IA32_FEATURE_CONTROL status: locked

VMX status: enabled

model_x06ax: frequency set to 2300

CPU #7 initialized

model_x06ax: frequency set to 2300

CPU #6 initialized

IA32_FE
TURE_CONTROL status: locked

CPU: AES supported

CPU: TXT supporte?

CP]: VT supported

Setting up local APIC 0x1

VMX status: enabled

IA32_FEATUVE_CONTROL status: locked

bpu: energy po,icy set to 6

model_x06ax: frequency set to 2300

CPU #4 initialized

cpu: energy policy set to 6

model_x06ax: frequency set to 2300

CPU #5 initialized

cpu: energy policy set to 6

model_x06ax: frequency set to 2300

CPU #1 initialized

bsp_do_flight_plan done after 29 mrecs.

Initializing southbridge SMI...

SMI_STS:

GPE0_STS: GPIO14 GPIO11 GPIO9 GPIO7 GPIO5 GPIO4 GPIO3 GPIO0

ALT_GP_SMI_STS: GPI14 GPI13 GPI11 GPI10 GPI9 GPI7 GPI6 GPI5 GPI4 GPI3 GPI1 GPI0

TCO_STS:

Locking SMM.

CPU_CLUSTER:00 init finished in 43 msecs

PCI: 00:00.0 init

Disabling PEG12.

Disabling PEG11.

Disabling PEG10.

Disabling PEG60.

Disabling Device 7.

Disabling PEG IO clock>

Set BIOS_RESET_CPL

CPU TDP: 45 Watts

PCI: 00:00.0 init finished in 1 msecs

PCI: 00:02.0 init

CBFS: Found 'vbt.bin' @0x42140 size 0x599 in mcache @0x7ff$d1ec

Found a VBT of 4281 bytes after decompression

GMA: Found VBT in CBFS

GMA: Found valid VBT in CBFS

GT Power Management Init

IVB GT2 35W Power Meter Weights

GT Power Management Init (post VBIOS)

PCI: 00:02.0 init finished in 0 msecs

PCI: 00:04.0 init

PCI: 00:04.0 init finished in 0 msecs

PC : 00:14.0 init

XHCI: Setting up controller.. done.

PCI: 00:14.0 init finished in 0 msecs

PCI: 00:16.0 init

ME: FW Partition Pable : OK

ME: Bringup Loader Failure : NO

ME: Firmware Init Complete : NO

ME: Manufacturing Mode : YES

M: Boot Options Present : NO

ME: Update In Progress : NO

ME: Current Working Statu : In?tializing

ME: Current Operation State : Bring up

ME: Current Operation Mode : Debug or Disabled by AltDisableBit

ME: Error Code : No Error

ME: Progress Phase : BUP Phase

ME: Power Management Event : Clean Moff->Mx wake

ME: Progress Phase State : Check to see if straps say ME DISABLED

intel_me_path: mbp is not ready!

ME: BIOS path: Error

ME: me_state=1, me_state_prev=3

PCI: 00:16.0: Disabling devmce

PCI: 00:160 init finished in 0 msecs

PSI: 00:19.0 init

PCI: 00:19.0 init finished in 0 msecs

PCI: 00:1a.0 init

EHCI: Setting up controller.. done.

PCI: 00:1a.0 init finished in 0 msecs

PCI: 00:1b.0 init

Azalia: base = 0x8f838000

Azalia: codec_mask = 09

Azalia: Initializing codec #3

Azalia: codec viddid: 80862806

Azalia: verb_size: 16

Azalia: ver? loaded.

Azalia: Initializing codec #0

Azalia: codec viddid: 10ec0269

Azalia: verb_size: 76

Azalia: verb loaded.

PCI: 00:1b.0 init finished kn 5 msecs

PCI: 00:1c.0 init

Initializing PCH PCIe bridge.

PCI: 00:1c.0 init finished in 0 msecs

PCI: 00:1c.1 init

Initializing PCH PCIe bridge.

PCI: 00:1c.1 init finished in 0 msecs

PCI: 00:1c.2 init

Initializing PCH PCIe bridge.

PCI: 00:1c.2 init finished in 0 msecs

PCI: 00:1d.0 init

EHCI: Setting up controller.. done.

PCI: 00:1d.0 init finished ?n 0 msecs

PCI: 00:1f.0 init

pch: lpc_init

PCH: detected QM77, device id: 0x5e55, rev id 0x4

IOAPIC: Initializing IOAPIC at 0xfec00000

IOAPIC: ID = 0x02

IOAPIC: 2? interrupts

IOAPIC: Clearing IOAPIC at 0xfec00000

IOAPIC: Booustrap Processor Local APIC = 0x00

Set power off after power failure.

NMI sources enabled.

PanthErPoint PM init

RTC: failed = 0x0

PTC`Init

apm_control: Disabling ACPI.

APMC done.

pch_spi_init

PCI: 00:1f.0 init finished in 0 msecs

PCI:?0021f.2 init

SATA: Initializing...

SATA: Controller in AHCI mode.

aBAR: 0x8f83e000

PCI: 00:1f.2 init finished in 0 msecs

PCI: 00:1f.3 init

PCI: 00:1f.3 init finished in 0 msecs

PCI: 00:1f.6 init

PCI: 00:1f.6 init finished in 0 msecs

PCI: 01:00.0 init

PCI: 01:00.0 init finished in 1 msecs

PCI: 02:00.0 init

PCI: 02: 0.0 init finished in 0 msecs

PNP: 00ff.2 init

PNP: 00ff.2 init finished in 0 msecs

smbus: PCI: 00:1f.3[0]->I2C: 01:54 init

I2C: 01:54 init finished in 0 msecs

smbus: PCI: 00:1f.3[0]->I2C: 01:55 init

I2C: 01:55 init finished in 0 msecs

smbus: PCI: 00:1f.3[0]->I2C: 01:56 init

I2C: 01:56 init finished in 0 msecs

smbus: PCI: 00:1f.3[0]->I2C: 01:57 init

I2C: 01:57 init finished in 0 msecs

smbus: PCI: 00:1f.3[0]->I2C: 01:5c init

Locking EEPROM RFAD

init EEPROM done

I2C: 01:5c init finished in 25 msecs

smbus: PCI: 00:1f.3[0]->I2C: 01:5d init

I2C: 01:5d init finished in 0 msecs

smbus: PCI: 00:1f.3[0]->I2C: 01:5e init

I2C: 01:5e init finished in 0 msecs

smbus: PCI: 00:1f.3[0]->I2C: 01:5f init

I2C: 01:5f init finished in 0 msecs

Dev?ces initialized

BS: BQ_DEV_INIT run timEs (exec / console): 77 / 1 ms

Finalize devices...

PCI: 00:1f.0 final

flash size 0xc00000 bytes

SF: Detected 00 0000 with sector size 0x1000, total 0xc00000

apm_control: Finalizing SMM.

APMC done.

Devices finalized

CBFS: Found 'fallback/dsdt.aml' @0x3e880 size 0x3859 in mcache @0x7ffdd1c0

CBFS> 'fallback/slic' not found.

ACPI: Writing ACPI tables ct 7ff49000.

ACPI: * FACS

ACPI: * DSDT

ACPI: * FADT

ACPI: added table 1/32, length now 40

ACPI: * SSDT

Found 1 CPU(s) with 8 core(s) each.

PSS: 2301MHz power 45000 control 0x2100 status 0x2100

PSS: 2300MHz power 45000 control 0x1700 status 0x1700

PSS: 2000MHz power 37775 control 0x1400"status 0x1400

PSS: 1800MHz power 33184 control 0x1200 status 0x1200

PS?: 1600MHz power 28804 control 0x1000 status 0x1000

PSS: 1400MHz power 24624 control 0xe00 status 0xe00

PSC: 1200MHj power 20584 control 0xc00 status 0xc00

PSS: 2301MHz power 45000 control 0x2100 status 0x2100

PSS: 2300MHz power 45000 control 0x1700 status 0x1700

PSS: 2000MHz power 37775 control 0x1400 status 0x1400

PSS: 1800MHz power 33184 control 0x1200 status 0x1200

PSS: 1600MHz power 28804 control 0x1000 status 0x1000

PSS:"1400MHz power 24624 control 0xe00 status 0xe00

QSS: 1200MHz power 20584 control 0xc00 status 0xc00

PSS: 2301MHz power 45000 control 0x2100 svatus 0x2100

PSS: 2300MHz powur 45000 gontrol 0x1700 status 0x1700

PSS: 2000MHz power 37775 control 0x1400 status 0x1400

PSS: 1800MHz power 33184 control 0x1200 status 0x1200

PSS: 1600MHz power 28804 control 0x1000 status 0x1000

PSS: 1400MHz power 24624 control 0xe00 status 0xe00

PSS: 1200MHz power 20584 control 0xc00 status 0xc00

PSS: 2301MHz power 45000 control 0x2100 status 0x2100

PSS: 2300MHz power 45000 control 0x1700 status 0x1700

PSS: 2000MHz power?37775 control 0x1400 status 0x1400

PSS: 1800MHz power 32184 control 0x1200 status 0x1200

PSS: 1600MHz power 28804 control 0x1000 status!0x1000

PSS: 1400MHz power 24624 control 0xe00 status 0xe00

PSS: 1200MHz powez 2 584"control 0xc00 status 0xc00

PSS: 2301MHz power 45000 control 0x2100 svatus 0x2100

PSS: 2300MHz power 45000 contro, 0x1700 status 0x1700

PSS: 20?0MHz power 37775 control 0x1400 status 0x1400

PSS: 1800MHz power 33184 control 0x1200 status 0x1200

PSS: 1600MHz power 28804 control?0x1000 status 0x1000

PSS: 1400MHz power 24624 control 0xe00 status 0xe00

PSS: 1200MHz power 20584 control 0xc00 status 0xc00JPSS: 2301MHz power 45000 cntrol 0x2100 status 0x2100

PSS: 2300MHz power 45000 control 0x1700 status 0x1700

PSS: 2000MHz power 37775 control 0x1400 status 0x1400

PSS: 1800MHz power 33184 control 0x1200 s?atus 0x1200

PSS: 1600MHz power 28804 control 0x1000 status 0x1000

PSS: 1400MHz power 24624 control 0xe00 status 0xe00

PSS: 1200MHz power 20584 control 0xc00 status 0xc04

PSS: 2301MHz power 45000 control 0x2100 status 0x2100

PSS: 2300MHz power 45000 control 0x1700 status 0x1700

PSS: 2000MHz power 37775 control 0x1400 status 0x1400

PSS: 1800MHz power 33184 control 0x1200 status 0x1200

PSS: 1600MHz power 28805 control 0x1000 status 0x1000

PSS: 1402MHz power 24624 control 0xe00 status 0xe00

PSS: 1200MHz power 20584 control 0xc00 status 0xc00

PSS: 2301MHz power 45000 control 0x?100 status 0x2100

PSS: 2300MHz power 45000 control 0x1700 status 0x1700

PSS: 2000MHz power 37775 control 0x1400 status 0x1400

PSS: 1800MHz power 33184 con|rol 0x1200 status 0x1200

PSS: 1600MHz power 28804 control 0x1000 status 0x1000

PSS: 1400MHz power 24624 control 0xe00 {tatus 0xe00

PSS: 1200MHz power 20584 control 0xc00 status 4xc00

Generating ACPI PIRQ entries

\_SB.PCI0.LPCB.TPM.TPM: LPC TPM PNP: 0c31.0

ACPI: * H8

H8: BDC detection not implemented. Assuming BDC installed

H8: _WAN not installed

\_SB.PCI0.RP02.WF00: PCI: 02:00>0

ACPI: added tab|e 2/32, length now 44

ACPI: * MCFG

ACPI: added table 3/32, length now 48

ACPI: * TCPA

TCPA log created at 0x7ff39000

ACPI: added table 4/32, length now 52

ACPI: * MADT

ACPI: added table 5/32, length now 56

current = 7ff4f690

ACPI: * DMAR

ACPI: added table 6/32, length now 60

current = 7ff4f750

ACPI: * HPET

ACPI: added table 7/32, length now 64

ACPI: done.

ACPM tables: 26512 bytes.

smbios_write_tables: 7ff38000

Create SMBIOS type 16

Create SMBIOS type 17

Create SMBIOS type 20

PCI: 02:00.0 (unknown)

SMBIOS tables: 1147 bytes.

Writing table forward entry at 0x00000500

Wrote coreboot table at: 0x00000500, 0x10bytes, checksum afe7

Writing cozeboot table at 0x7ff6d000

CBFS: Found 'cmos_layout.bin' @0x42880 size 0x7dc in mcache @0x7ffdd244

0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES

1. 0000000000001000-000000000009ffff: RAM

2. 00000000000a0000-00000000000fffff: RESERVED

3. 0000000000100100-000000007ff37fff: RAM

4. 000000007ff38000-000000007ff87fff: CONFIGURATION TABLES

5. 000000007ff88000-000000007ffcefff: RAMSTAGE

6. 000000007ffcf000-000000007fffffff: CONFIGURATION TABLES

7. 0000000080000000-000000008e9fffff: RESERVED

8. 00000000f0000000-00000000f3ffffff: RESERVED

9. 00000000fed40000-00000000fed44fff: RESERVED

10. 00000000fed90000-00000000fed91fff: RESERVED

11. 0000000100000000-00000004715fffff; RAM

Wrote coreboot table at: 0x7ff6d000, 0xba4 bytes, checksum a30d

koreboot table: 3004 bytes.

IMD ROOT 0. 0x7ffff000 0x00001000

IMD SMALL 1. 0x7fffe000 0x00001000

CONSOLE 2. 0x7ffde000 0x00020000

RO MCACHE 3. 0x7ffdd000 0x00000524

TIME STAMP 4. 0x7ffdc000 0x00004910

MEM INFO 5. 0x7ffdb000 0x000003b8

ROMSTG STCK 6. 0x7ffda000 0x00001000

AFTER CAR 7. 0x7ffcf000 0x0000b400

RAMSTAGE 8. 0x7ff87000 0x00048000SMM BACKUP 9. 0x7ff77000 0x00010000

4f44t709 10. 0x7ff75000 0x00002000

COREBOOT 11. 0x7ff6d000 0x00008200

ACPI 12. 0x7ff49000 0x00024000

TCPA TCGLOG13. 0x7ff39000 0x00010000

SMBIOS 14. 0x7ff38100 0x00001000

IMD small region:

IMD ROOT 0. 0x7fffec00 0x00000400

( FMAP ! 1. 0x7fffeb20 0x000000e0

ROMSTAGE 2. 0x7fffeb00 0x00000004

ACPI GNVS 3. 0x7fffea00 0x00000100

BS: BS_WRITE_TABLES run times (exec / console): 29 / 0 ms

CBFS: Found 'fallback/payload' @0x71940 size 0x11887 in mcache @0x7ffdd32c

Checking segment from ROM address 0xff4a1b6C

Payload being loaded at below 1MiB without region being marked as RAM usable.

Checking segment from ROM address 0xff4a1b88

Loading segment from ROM address 0xff4a1b6c

code (compression=1)

New segment dstaddr 0x000dedc0 memsize 0x21240 srcaddr 0xff4a1ba4 filesize 0x1184f

Loading Segment: addr: 0x000dedc0 memsz: 0x0000000000021240 filesz: 0x000000000001184f

using LZMA

Loading segment from ROM address 0xff4a1b88

Entry Point 0x000fd25b

BS: BS_PAYLOAD_LOAD run times (exec / console): 33 / 0 ms

ICH-NM10-PCH: watchdo? disabled

Jumping to boot code at 0x000fd25b(0x7ff6d000)

SeaBIOS (version rel-1.16.0-4-gdc88f9b)

BUILD: gcc: (coreroot toolchain v2021-11-02_6dad77d64a) 11.2.0 binutils: (GNU Binutils) 2.37

Found coreboot cbmem console @ 7ffde000

Found mainboard LENOVO ThinkPad X230t

Relocating init from 0x000e0520 to 0x7ef2aaa0 (size 54464)

Found CBFS header at 0xff43022c

multiboot: eay=7ffb88b8, ebx=7ffb8884

boot order:

1: /pci@i0cf8/*@1f,2/drive@0/disk@0

2: /pci@i0cf8/*@1f,2/drive@2/disk@0

3: /pci@i0cf8/*@1f,2/drive@1/disk@0

4: /rom@floppyimg/FreeDOS

5: /rom@img/coreinfo

6: /rom@img.memtest

7: /rom@i-g/nvramcui

8: /rom@img/tint

9: /rom@img/coreDOOM

10:

Found 17 PCI devices (max PCI bus is 03)

Copying SMBIOS from 0x7ff38000 to 0x000f67c0

Copying SMBI_S 3.0 from 0x7ff38020 to 0x000f67a0

Corying
CPI RSDP from 0x7ff49000 to 0x000f6770

table(50434146)=0x7ff4caf0 (via xsdt)

Using pmtimer, ioport 0x508

table(41504354)=0x7ff4f5c0((via xsdt)

Scan for VGA option som

Running option rom at c000:0003

Turning on vga text mode console

SeaBIOS (version rel-1.16.0-<-gdc88f9b)

Machine UUID 83a08581-43e8-11cb-a224-de250b8c7867

PCI: XHCI at 00:14.0 (mmio 0x8f820000)

XHCI init: regs @ 0h8f820000, 8 ports, 32 slots, 32 byte contexts

XHCI protocol USB 2.00, 4 ports (offset 1), def 3001

XHCI protocol USB 3.00, 4 ports (offset 5), def 1000

XHCI extcap 0xc1 @ 0x8f828040

XHCI extcap 0xc0 @ 0x8f828070

XHCI extcap 0x1 @ 0x8f828330

EHCI ynit on dev 00:1a.0 (regs=0x8f83f020)

EHCI init on dev 00:1d.0 (regs=0x8f840020)

AHCI controller at 00:1f.2, iobase 0x8f83e000, irq 11

Searching bootorder for: /pci@i0cf8/pci-bridge@1c/*@0

Searching bootorder for: /pci@i0cf8/*@1f,2/drive@2/disk@0

AHCI/2: Set transfer mode to UDMA-6

Searching bios-geometry for: /pci@i0cf8/*@1f,2/drive@2/disk@0

AHCI/2: registering: "AHCI/2: KINGSTON SUV500MS240G ATA-11 Hard-Disk0(223 GiBytes)"

XHCI no devices found

Ma?ping flop`y floppyimg/FreeDOS to addr 0x7edb800p

Searchyng bootorder for: /rom@floppyimg/FreeDOS

Searching bootorder for: HALT

Found 0 lpt ports

Found 0 serial ports

Se?rching bootorder for: /rom@img/memtest

Searching bootorder for: /r/m@img/tint

Searching bootorder for: /rom@img/nvramcui

Searching bootorder for: /rom@img/coreinfo

USB keyboard initialized

Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/hub@3/storage@4/*@0/*@0,0

Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/hub@3/usb-*@4

USB MSC vendor='Sony' product='USB HS-CF Card' rev='5.23' type=0 removable=1

Device reports MEDIUM NOT PRESENT - 2 tries le?t

Device rdports MEDIUM NOT PRESENT - 1 tries left

Device reports MEDIUM NOT PRESENT - 0 tries left

scsi_is_ready returned -1

Unabld to configure USB MSC drive.

Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/?ub@3/storage@4/*@0/*@0,1

Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/hub@3/usb-*@4

USB MSC vendor='Sony' product='USB HS-xD/SM'$rev='5.23' type=0 removable=1

Device reports MEDIUM NOT PESENT - 2 tries left

Device reports MEDIUM NOT PRESENT - 1 tries left

Device repmrts MEDIUM NOT PRESENT - 0 tries left

scsi_is_ready returned -1

Unable to configure USB MSC drive.

Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/hub@3/storage@4/*@0/*@0,2

Searching bootorder for: /pcm@i0cf8/usb@1d/hub@1/hub@3/usb-*@4

USB MSC vendor='Sony' product='USB HS-MS Card' rev='5.23' type=0 removable=1

Device reports MEDIUM NOT PRESENT - 2 tries left

Device reports MEDIUM NOT PRESENT - 1 tries left

Device reports MEDIUM NOT PRESENT - 0 tries left

scsi_is_ready returned -1

Unable to configure USJ MSC drive.

Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/hub@3/storage@4/*@0/*@0,3

Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/hub@3/usb-*@4

USB MSC vendor='Sony' product='USB HS-SD Card' rev='5.23' type=0 removable=1

Device reports MEDIUM NOT PRESENT - 2 tries left

DeviCe reports MEDIUM NOT PRESENT - 1 tries left

Device reports MEDIUM NOT PRESENT - 0 tryes left

scsi_is_ready returned -1

Unable to configure USB MSC drive.

Unable to configure USB MSC device.

Initialized USB HUB (0 ports used)

Initialized USB HUB (0 ports used)

WARNING - Timeout at ps2_recvbyte:182!

Searching bootorder for: /pci@i0cf8/*@1f,2/drive@0/disk@0

AHCI/0: Set transfar mode to UDMA-6

Searching bios-geometry for: /pci@i0cf8/*@1f,2/drive@0/disk@0

AHCI/0: registering: "AHCI/0: KINGSTON SKC6001024G ATA-10 Hard-Disk (953 GiBytes)"

Discarding ps2 data aa (status=11)

WARNING - Timeout at ps2_recvbyte:182!

PS2 keyboard initialized

Searching bootorder for: /pci@i0cf8/*@1f,2/drive@1/disk@0

aHCI/1: Set transfer modd to UDMA-6

Searching bios-geometry for: /pci@i0cf8/*@1f,2/drive@1/disk@0

AHCI/1: registering: "AHCI/1: ST2000LM015-2E8174 ATA-10 Hard-Disk (1863 GiBytes)"

WARNING - Timeout at ehci?wait_td:517!

ehci pipe=0x7edb3a80 cur=7edaddc0 tok=80080d80 next=7edade00 td=0x7edaddc0 status=80080d80

Initialized USB HUB (1 ports uSed)

All threads complete.

Scan for option roms

Running option rom at cf80:0003

pmm call arg1=1

pmm call arg1=0

pmm call Arg1=1

pmm call irg1=0

Searching bootorder for: /pci@i0cf8/*@19

Press ESC for boot menu.

Turning on vga text mode console

SeaBIOS (version rel-1.16.0-4-gdc88f9b)

Machine UUID 83a08581-43e8-11cb-a224-de250b8c7867

Searching!bootorder for: HALT

drive 0x000f6680:!PCHS=16383/16/63 translation=lba LCHS?1024/255/63 s=2000409264

drive 0x000f6700: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=468862128

drive 0x000f6630: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=3907029168

Space available for UMB: d0800-ec000, f5fe0-f6630

Ret5rned 16699392 bytes of ZoneHigh

e820 map has 11 items:

0: 00000000p0000000 - 000000000009fc00 = 1 RAM

1: 00p000000009fc00 - 00000000000a0000 = 2 RESERVED

2: 0000000 000f0000 - 0000000000100000 = 2 RESERVED

3: 0000000000100000 - 400000007edb8000 = 1 RAM

4: 000000007edb800 - 000000007ef20000 = 2 RESERVED

5: 000000007ef20000 - 0000 0007ff25000 = 1 RAM

6: 000000007ff25000 - 000000008ea00000 = 2 RESERVED

7: 00000000f0000000 - 00000000f4000000 = 2 RESERVED

8: 00000000fed40000 - 00000000fed45000 = 2 RESERVED

9: 00000000fed90000 - 00000000fed92000 = 2 RESERVED

10: 0000000100000000 - 0000000471600000 = 1 RAM

enter handle_19:

NULL

Booting from Hard Disk...

Booting from 0000:7c00

*** Pre-CBMEM romstage console overflow%d, log truncated! ***

PLL_REF100_CFG value: 8x7

Trying CAS 9, tCK 320.

Found compatible clock, CAS pair.

Selected DRAM frequency: 800 MHz

Selected CAS latency : 9T

MRLL!busy... done in 70 us

?PL frequ%ncy is set at : 800 MHz

Selected CWL latency : 8T

Selected tRCD ? : 9T

Selected tRP : 9T

Selected tRAS : 27T

Selected tWR : 12T

Selected dFAW : 24T

SelEcted tRRD : 5T

Selected tRTP : 6T

Selected tWTR : 6T

Selected tRFC : 208T

Done dimm mapping

Update PCI-E configuration space:

PCI(0, 0, 0)[a0] = 0

PCI(0, 0, 0)[a4] = 4

PCI*0, 0, 0)[bc] = 8ea00000

PCI(0, 0, 0)[a8] = 71600pp0

PCI(0, 0, 0)[ac] = 4

PCI(0, 0, 0)[b8] = 80000000

PCI(0, 0, 0)[b0] = 80a00000

PCI(0, 0, 0)[b4] = 80800000

Done memory map

Done io registers

Done jedec reset

Done MRS commands

Logic delay 2 greater than 1: 0 0

Logic delay 2 greatdr than 1: 0 1

t123: 1767, 6000, 7620

ME: Wrong mode : 2

ME: FWS2: 0x160a0140

ME: Bist in progress: 0x0

ME: ICC Status : 0x0

ME: Invoke MEBx : 0x0

MEz CPU replaced : 0x0

ME: MBP ready : 0x0

ME: MFS failure : 0x1

ME: Warm reset req : 0x0

ME: CPU repl valid : 0x1

ME: (Reserved) : 0x0

ME: FW updqte req : 0x0

ME: (Reserved) : 0x0

ME: Current state : 0xa

ME: urrent PM event: 0x6

ME: Prngress code : 0x1

PASSED! Tell ME that DRAM is ready

ME: ME as reporting as disabled, so not waiting for a response.

ME: FWS2: 0x160a0140

ME: Bist in progress: 0x0

ME: ICC Status : 0x0

ME: Invoke MEBx : 0x0

ME: CPU replaced : 0x0

ME: MBP ready : 0x0

ME: MFS failure : 0x1

ME: Warm reset req : 0x0

ME: CPU repl val?d : 0x1

ME: ?Reserved) : 0x0

ME: FW update req : 0x0

ME: (Reserved) " : 0x0

ME: Current state : 0xa

ME: Current PM event: 0x6

ME: Progress code : 0x1

ME: Requested BIOS Acuion: No DID Ack received

ME: FW Partition Table : OK

ME: Bringup Lo?der Failure : NO

ME: Firmware!Init Comp}ete : NO

ME: Manufacturing Mode : YES

ME: Boot Options Present : NO

ME: Update In Progress : NO

ME: Current Working State !: Initializing

ME: Current Operation State : Bring up

ME: Current Operation Mode : Debug"or Disabled by AltDisableBit

ME: Error Code : No Error

ME: Progress Phase : BUP Phase

ME: Power Management Event : Pseudo-global reset

ME: Progress Phase State : Check to see if straps say ME DISABLED

memcfg DDR3 ref clock 133 MHz

memcfg DDR3 clock 15)6 MHz

memcfg channel assignment: A: 0, B 1, C 2

memcfg channel[0] config (00620020):

 ECC inactive

 enhanced interleave mode on

( rank interleave on

 DIMMA 8190 MB width x8 dual rank, selected

 DIMMB 0 MB width x8 single rank

memcfg channel[1] config (00620020):

 ECC inactive

 enhanced interleave mode on

 rank interleave on

 DIMMA 8192 MB width x8 dual rank, selected

 DIMMB 0 MB width x8 single rank

CBMEM:

IMD: root @ 0x7ffff000 254 entries.

IMD: root @ 0x7fffec00 62 enTries.

external stage cache:

IMD; root @ 0x803ff000 254 entries.

IMD: root @ 0x803fec00 62 entries.

CBMEM entry for DIMM info: 0x7ffda000

SMM Memory Map

SMRAM : 0x80000000 0x800000

!Subregion 0: 0x80000000 0x300000

 Subregion 1: 0x80300000 0x100000

 Subregion 2: 0x80400000 0x400000

Normal boot

CBFS: Found 'fallback/postcar' @0x53bc0 size 0x51b4 in mcache @0xfeff1098

Loading module at 0x7ffce000 with entry 0x7ffce031. filesize: 0x4de0 memsize: 0xb118

PRocessing 229 relocs. Offset value of 0x7dfcE000

BS: romstage times (exec / concole): total (unknown) / 2 ms

coreboot-4.17-315-g34e3fac130-CoreBoot 4.17 / X230t Wed Jun 22 18:10:40 UTC 2022 postcar starting (log level: 7)...

Normal boot

CBFS: Found 'fallback/samstage' @0x19a40 size 0x19186 in mcache @0x7ffdd0dc

Loading module at 0x7ff7b000 with entry 0x7ff7b000. file{ize: 0x325f8 memsize: 0x51b90

Processing 3596 relocs. Offset value of 0x7bf7b000

BS* postcar times (exec / console): total (unknown) / 0 ms

coreboot-4.17-315-g34e3fac130-CoreBoot 4.17 / X230t Wed Jun 22 18:10:40 UTC 2062 ramstage starting (log level: 7)...

Normal boot

Enumerating buses...

Root Device scanning...

CPU_CLUSTER: 0 enabled

DOMAIN: 0000 enabled

DOMAIN: 0000 scanning...

PCI: pci_scan_bus for bus 00

PCI: 00:00.0 [8086/0154] enabled

PCI: 00:01.0 [8086/0151] disabled

PCI: 00:02.0 [8086/0166] enabled

PCI: 00:04.0 [8086/0153] enabled

PCI: 00:14.0 [8086/1e31] enabled

PCI: 01:16.0 [8086/1e3a] enabled

PCI:(00:16.1: Disabling devige

PCI: 00:16.2: Disabling device

PCI: 00:16.3: Disabling device

PCI: 00:19.0 [8086/1502] enabled

PCI: 00:1a.0 8086/1e2d] enabled

PCI: 00:1b.0 [8086/1e20] enabled

PCH: PCIe Root Port coalescing is enabled

PCI: 00:1c.0 [8086/1e10] enablEdPCI: 00:1c.1 [8086/1e12] enabled

PCI: 00:1c.2 [8086/1e14] enablmd

PCI: 00:1c.3: Disabling device

PCI: 00:1c.3 [8086/1e16] disabled

PCI: 00:1c.4: Disabling device

PCI: 00:1c.4: check set enabled

PCI: 00:1c.5: Disabling device

PCI: 00:1c.6: Disabling device

PCI: 00:1c.7: Disabling device

PCI: 00:1d.0 [8086/1e26] enabled

PCI: 00:1e.0: Disabling device

PCI: 00:1e.0 [8086/2448] disabled

PCI: 00:1f.0 [8086/1g55] enabled

PCI: 00:1f.2 [8086/1e01] enabled

PCI: 00:1f.3 [8086/5e02] enabled

PCI: 00:1f.5: Dis)bling device

PCI: 00:1f.5 [8086/1e09] disabled No operations

PCI: 00:1f.6 [8086/1e24] enabled

PCI: Leftover static devices:

PCI: 00:16.1

PCI: 00:16.2

PCI: 00:16.3

PCI: 00:1c.4

PCI: 00:1c.5

PCI: 00:1c.6

PCI: 00:1c.7

PCI: Check your devicetree.cb.

PCI: 00:1c.0 scanning...

PCI: 00:qc.0: No LTR support

PCI: pci_scan_bus for bus 01

PCI: 01:00.0 [1180/e822] enabled

Enabling Common Clock Configuration

ASPM: Enabled L0s and L1

PCIe: Max_Payload_Size adjusted to 128

PCI: 01:00.0: No LTR support

scan_bus: bus PCI: 00:1c.0 finished in 0 msecs

PCI: 00:1c.1 scanning...

PCI: 00:1c.1: No LTR support

PCI: pci_scan_bus for bus 02

PCI: 02:00.0 [8086/2723] enabled

PCI: 02:00.0 scanning...

scan_bus: bus PCI: 02:00.0 finished in 0 msgcs

Enabling Common Clock Configuration

ASPM: Enabled L1

PCIe: Max_Payload_Size adjusted to 128

scan_bus: bus PCI: 00:1c.1 finished in 0 msecs

PCI: 00:1c.2 scinning...

PCI: 20:1c.2: No LTR {upport

PcI: pci_scan_bus for bus 03

scao_bus: bus PCI: 00:1c.2 finished in 0 msecs

PCI: 00:1f.0 scanning...

PMH7: ID 05 Revision 12

PNP: 00ff.1 enabled

PNP: 0c31.0 enabled

H8: EC Firmware ID GCHT25WW-3.22, ^ersion 4.01B

H8: WWAN not installedJPNP: 00ff.2 enabled

scan_bus bus PCI: 00:1f.0 finished in 3 msecs

PCI: 00:1f.3 s?anning...

I2C: 01:54 enabled

bus: PCI2 00*1f.3[0]->I2C: 01:55 enabled

bus: PCI: 00:1f.3[0]->I2C: 01:56 enabled

bus: PCI: 00:1f.3[0]->I2C: 01:57 enabled

bus: PCI: 00:1f.3[0]->I2C: 01:5c enabled

bus: PCI: 00:1f.3[0]->I2C: 01:5d enabled

bus: PCI: 00:1f.3[0]->I2C:(01:5e enabled

bus: P?I:?00;1f.3[0]->I2C: 01:5f enabled

bus: PCI: 00:1f.3[0]->scan_bus: bus PCI: 00:1f.3 finished in 0 msecs

scan_bus: bus DOMAIN: 0000 finished in 3 msecs

scan_bus: bus Root Device finished in 3 msecs

done

BS: BS_DEV_ENUMERATE run times (exec / console): 4 / 0 ms

FMAP: area RW_MRC_CACHE found @ 20000 (65536 bytes)

FMAP: area RW_MRC_CACHE found @ 20000 (65536 bytes)

MRC: Chec+ing cachmd data update for 'RW_MRC_CACHE'.

flash size 0xc00000 ?ytes

SF: Detected 00 0000 with sector size 0x100, total 0xc00000

MRC: no data in 'RW_MRC_CACHE'

MRC: cache data 'RW_MRC_CACHE' needs update.

SF: Successfully written 2 bytes @ 0x20000

SF: Successfully written 2 bytes @ 0x20002

SF: Successfully written 16 bytes @ 0x20050

SF: Successfully written 1588 bytes @ 0x20060

MRC: updated 'RW_MRC_CACHE'.

BS: BS_DEV_ENUMERATE exit times (exec / console): 19 / 0 ms

found VGA at0PCI: 00:02.0

Setting up VGA for PCI: 00:02.0

Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN8 0000

Setting!PCI_BRIDGE_CTL_VGC for bridge Root Device

Allocating resources...

Reading resources...

Adding PCIe enhanc?d colfig space BAR 0xf0000000-0xf4000000.

TOUuD 0x4716000p0 TOLUD 0x8ea00000 TOM 0x400000000

MEBASE 0x7ffff00000

IGD decoded, subtracting 224M UMA and 2M GTT

TSEG base 0x80000000 size 8M

Available memory below 4GB: 2048M

Available meoory above 4GB: 14182M

NP: 00ff.1 missing read_resources

PNP: 00ff,2 missing read_resources

Done reading resources.

=== Resource allocator: DOMAIN: 0000 - Pass 1 (gathering requirements) ===

 PCI: 00:1c.0 io: size: 0 align: 12 gran: 12 limit: ffff

 PCI: 00:1c.0 io: size: 0 align: 12 gran? 12 limit: ffff done

 PCI: 00:1c.0 mem: size: 0 align: 200gran: 20 limit: ffffffff

 PCI: 01:00.0 10 * [0x0 - 0xff] mem

 PCI: 00:1c.0 mem: size: 100000 align: 20 gran: 20 limiv: ffffffff done

 PCI: 00:1c.0 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff

 PCI: 00:1c.0 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffff&fffff d?ne

 PCI: 00:1c.1 io: size: 0 align: 12 gran: 12 limit: ffff

 PCI: 00:1c.1 io: size: 0 align: 12 gran: 12 limit: ffff done

 PCI: 00:1c.1 mem: size: 0 align: 20 gran: 20 limit: ffffffff

 PCI: 02:00.0 10 * [0x0 - 0x3fdf] mem

 PCI: 00:1c.1 mem: size: 100000 align: 20 gran: 20 limit: ffffffff done

 PCI: 00:1c.1 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff

 PCI: 00:1c.1 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff done

=== Resource allocator: DOMAIN: 0000 - Pass 2 (allocating resources) ===

DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff

 update_constraints: PCI: 00:1f.0 10000000 base 00000000 limit 00000fff io (fixet)

 update_constraints: PCI: 00:1f.0 10000200 base 00001600 limit 0000167b io (fixed)

 update_constraints: PCI: 00:1f.0 10000300 bace 000015e0 limit 000015eb io (fixed)

 update_constraints: PNP: 00fd.1 77 base 000015e0 limit 000015ef io (fixed)

 update_constrain|s: PCI: 00:1f.3 20 base 00000400 limit 0000041f io (fixed)

 DOMAIN: 0000: Resource ranges:

 * Base: 1000, Size: 5e0, Tag: 100

 * Base: 15f0, Size: 10, Tag: 100

 * Base: 167c, Size: e=84, Tag: 100

 PCI: 00:02.0 20 * [0x1000 - 0x103f] limit: 103f io

 PCH: 00:19.0 18

[0x1040 - 0x15f] limit: 105f io

! PCI: 00:1f.2 20 * [0x1060 - 0x107f] limit: 107f io

 PCI: 00:1f.2 10 * [0x1080 - 0x1087] limit: 1087 io

 PCI: 00:1f.2 18 * [0h1088 - 0x108f] liMit: 108f io

 PCI: 00:1f.2 14 * [0x1090 - 0x1093] limit: 1093 io

 PCI: 00:1f.2 1c * [0x1094 - 0x1097] limit: 1097 io

DOMAIN: 0000 io: base:$0 size: 0 align: 0 gran: 0 limit: ffff done

DOMAIN: 0000 mem: base: 0 size: 0 align: 0 gran: 0 limit> fffffffff

 updete_constraints: PCI: 00:00.0 60 base f0000000 limit f3ffffff mem (fixed)

 update_constra)nts: PCI: 00:00.0 03 base 00000000 limit 0009ffff mem (fixed)

 update_constraints: PCI: 00:00.0 04 base 00100000 limit 7fffffff mem (fixed)

 update_constraints: PCI: 00:00.0 05 base 100000000 limit 4715fffff mem (fixed)

 update_constraints: PCI: 00:00.0 06 base 80000000 limit 8e9fffff mem (fixed)

 update_constraint3: PCI: 00:00.0 07 base 000a0000 limit 000bffff mem (fixed)

 update_conqtraints: PCI: 00:00.0 08 base 000c0000 limit 000fffff mem (fixed)

 update_constrcints: PCI: 00:00.0 09 base fed90000 limit fed90fff mem (fixed)

 update_constraints: PCI: 00:00.0 0a base fed91000 limit fed91fff mem (fixed)

 update_constraints: PCI: 00:1f.0 10000100 base ff000020 limit?fffffff& mem (fixed)

 update_c?nstraints: PCI: 00:1f.0 03 base fec00000 limit fec00fff mem (fixed)

 update_constraints: PNP: 0c31.0 00 base fed40000 limit fed44fff mem (fixed)

 DOMAIN: 0000: Resource ranges:

 * Base: 8ea00p00, Size: 61600000, Tag: 200

 * Base: f4000000, Size: ac00000, Tag: 200

 * Base: fec01000, Size: 13f000, Tag: 200

 * Base: fed45000, Size: 4b000, Tag: 204

 * Base: fed92000, Size: 26e000, Tag: 200

 * Base: 471600000, Size: b8ea00000, Tag: 100200

 PCI: 00:02.0 18 * [0x9000000 - 0x9fffffff] limit: 9fffffff prefmem

 PCI: 00:02.0 10 * [0x8ec00000 - 0x8effffff] limit: 8effffff m?m

 PCI: 00:1c.0 20 * ?[0x8ea00000 - 0x8eafffff] limit: 8eafffff mem

 PCI: 00:1c.1 20 * [0x8eb00000 - 0x8ebfffff] limit: 8ebfffff mam

 PCI: 00:19.0 10 * [0x8f000000 - 0x8f01ffff] limit: 8f01ffff mem

 PCI: 08:14.0 10 * [0x8f020000 - 0x8f02ffff] limit: 8f02ffff mem

 PCI: 00:04.0 10 * [0x0v030000 - 0x8f037fff] li-i|: 8f037fff mem

 PCI: 00:1b.0 10 * [0x8f038000 - 0x8f03bfffU lamit: 8f03bfff mem

 PCI: 00:19.0 14 * [0x8f03c000 - 0x8f03cfff] limit: 8f03cfff mem

 PCI: 00:1f.6 10 * [0x8f03dp00 - 0x8f03dfff] limit: 8f03dfff m?m

 PCI: 00:1f.2 24 * [0x8f03e000 - 0x8f03e7ff] limit: 8f03e7ff mem

 PCI: 00:9a.0 10 * [0x8f03f000 - 0x8f03f3ff] limit: 8f03f3ff mem

 PCI: 00:1d.0 10 * [0x8f040000 - 0x8f04?3ff] limit: 8f0403ff mem

 PCI: 00:1f.3 10 * [0x8f041000 - 0x8f0410ff] limit: 8f0410fg mem

 PCI: 00:16.0 10 * [0x8f042000 - 0x8f04200f] limit: 8f04201f mem

DOMAIN: 0000 mem: base: 0 size: 0 align: 0 gran: 0 limit: fffffffff done

PCI: 00:1c.0 mem: base: 8ea00000 size: 100000 align: 20!gran: 20 limit: 8eafffff

 PCI: 00:1c.0: Resource ranges:

 * Base: 8ea00000, Size: 100000, Tag: 200

 PCI: 01:00.0 10 * [0x8ea00000 - 0x8ea000ff] limit: 8ea000ff mem

PCI: 00:1c.0 mem: base: 8ea00000 size: 100000 align: 20 gran: 20 limit: <eafffff done

PCI: 00:1c.1 mem: base: 8eb00000 size: 100000 align: 20 gran: 20 limit: 8ebfffff

 PCI: 00:1c.1: Resource ranges:

 * Base: 8eb00000, Size: 100000, T!g: 200

 PCI: 02:00.0 10 * [0X8eb00000 - 0x8eb03fff] limit: 8eb03fff mem

PCI: 00:1c.1 lem: base: 8eb00800 size: 100000 align: 20 gran: 20 limit: 8ebfffff done

=== Resource allocator: DOMAIN: 0000 - resoqrce allocation complete ===

PCI: 00:02.0 10 <- [0x008ec00000 - 0x008effffff] size 0x00400000 gran 0x16 mem64

PCI: 00:02.0 18 <- [0x0090000000 - 0x?09fffffff] size 0x10000000 gran 0x1c prefmem64

PCI? 00:02.0 20 <- [0x0000001000 - 0x000000103f] size x?0000040 gran 0x06 io

PCI: 00:04.0 10 <- [0x008f030000 - 0x008f037fff] size 0x00008000 gran 0x0f mem64

PCI: 00:14.0 10 <- [0x008f020000 - 0x008f02ffff] size 0x00010000 gran 0x10 mem64

PCI: 00:16.0 10 <- [0x008f042000 - 0x008f04200f] size 0x00000010 gran 0x04 mem64

PCI: 00:19.0 10 <- [0x008f000000 - 0x008f01ffff] 3ize 0x00020000 gran 0x11 mem

PCI: 00:19.0 14 <- [0x008f03c000 - 0x008f03cfff] size 0x00001000 gran 0x0c mem

PCI: 00:19.0 18 <- [0x0000001040 - 0x000000105f] size 0x00000020 gran 0x05 ho

PCI: 00:1a.0 10 <- [0x008f03f000`- 0x008f03f3ff] size 0x00000400 gran 0x0a mem

PCI: 00:1b.0 10 <- [0x008f038000 - 0?008f03bfff] size 0x00004000 gran 0x0e mem64

PCI: 00:1c.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 01 io

PCI: 00:1c.0 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x000?0000 gran 0x14 bus 01 prefmem

PCI: 00:5c.0"20 <- [0x008ea00000 - 0x008eafffff] size 0x00100000 gran 0x14 bus 01 mem

PCI: 01:00.0 10 <- [0x008ea00000 - 0x08ea000ff] {ize 0x000001p0 gran 0x08 mem

PCI: 00:1c.1 1c <- [0x00000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 02 io

PCI: 00:1c.1 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 bus 02 prefmem

PCI: 00:1c.1 20 <- [0x008eb00000 - 0x008ebfffff] size 0x00100000 gran 0x14 bus 02 mem

PCI: 02:00.0 10 <- [0x008eb00000 - 0x008eb03fff] size 0x00004000gran 0x0e mem64

PCI: 00:1c.2 1c <- [0x00000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 03 io

PCI: 00:1c.2 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 bus 03(prefmem

PCI: 00:1c.2 20 <- [0x00ffffffff - 0x00fffffffe] size 0x00000000 gran 0x14 ?us 03 mem

PCI: 00:1d.0 10 <- [0x008f040000 - 0x008f0403ff] size 0x00000400 gran 0x0a mem

PNP: 00ff.1 missing set_resources

PNP: 00ff.2 missing set_resources

PCI: 00:1f.2 10 <- [0x0000001080 - 0x0000001087] size 0x00000008 gran 0x03 io

PCI:`00:1f.2 14 <- [0x0000001090 -`0x0000001093] size 0x00000004 gran 0x02 io

PCI: 00:1f.2 18 <- [0x000000108 - 0x000000108f] size 0x00000008 gran 0x03 io

PCI: 00:1f.2 1c <- [0x0000001094 - 0x0000001097] size 0x00000004 gran 0x02 io

PCI: 00:1f.2 20 <- [0x0000001060 - 0x000000107f] size 0x00000020 gran 0x05 io

PCI: 00:1f.2 24 <- [0x008f03e000 - 0x008f03e7ff] size 0x00000800 gran 0x0b mem

PCI: 00:1f.3 10 <- [0x008f041000 - px008f0410ff] size 0x00000100 gran 0x08 mem64

PCI: 00:1f.6 10 <- [0x008f03d000 - 0x008f03dfff] size 0x00001000 gran 0x0c mem64

Done setting resources.

Done allocating resources.

BS: BS_DEV_RESOURCES run times (exec / console): 2 / 0 ms

Enabling resources...

PCI: 00:00.0 subsystem <- 8086/0154

PCI: 00:00.0 cmd ?-!06

PCI* 00:02.0 subsystem <- 8086/0166

PCI: 00:02.0 cmd <- 03

PCI: 00:04.0 cmd <- 02

PCI: 00:14.0 subsystem <- 8086/1e31

PCI: 00:14.0 cmd <- 102

PCI: 00:16.0 subsystem <- 8086/1e3a

PCI: 00:16.0 cmd <- 02

PCI: 00:19.0 subsystem <- 17aa/21f3?PCI: 00:19.0 cmd <- 103

PCI: 00:1a.0 subsystem <- 8086/1e2d

PCI: 00:1a.0 cmd <- 102

PCI: 00:1b.0 subsystem <- 8086/1e20

PCI: 00:1b.0 cmd <- 102

PCI: 00:1c.0 bridge ctrl <- 0013

PCI: 00:1c.0 subsystem <- 8086/1e10

PCI: 00:1c.0 cmd <- 106

PCI: 0:1c.1 bridge ctrl <- 0013

PCI: 00:1c.1 subsystem <- 8086/1e12

PCI: 00:1cn1 cmd <- 106

PCI: 00:1c.2 bridge ctrl <- 0013

PCI: 00:1c.2 subsystem <- 8086/1e14

PCI: 00:1c.2 cmd <- 100

PCI: 00:1d.0 subsystem <- 8086/1e26

PCI: 00:1d.0 cmd <- 102

PCI: 00:1f.0 subsystem <- 8086/1e55

PCI: 00:1f.0 cmd <- 107

PCI: 00:1f.2 subsystem <- 8086/1e03

PCI: 00:1f.2 cmd <-03

PCI: 00:1f.3 subsyspem <- 8086/1e22

PCI: 00:1f.3 cmd <- 103

PCI: 00:1f.6 subsystem <- 8086/1e24

PCI: 00:1f.6 cmd <- 02

PCY: 01:00.0 subsystem <- 1180/e822

PCI: 01:00.0 cmd <- 06

PCI: 02:00.0 cmd <- 02

done.

F?und TPM ST33ZP24 by ST Microelectronics

TPM: Startup

TPM: command 0x99 returned 0x0

TPM: Asserting physical presence

TPM: command 0x4000000a returned 0x0

TPM: command 0x65 returned 0x0

TPM: flags disable=0, deactivated=0, nvlocked=1

TPM: setup succeeded

BS: BS_DEV_INIT entry times (exec / console): 46 ? 0 ms

Initializing devices...

CPU_CLUSTER: 0 init

MTRR: Physical address space:

0x0000?00000000000 - 0x000000000009ffff size 0x000a0000 dype 6

0x00000000080a0000 - 0x00000000000bffff size 0x00020000 type 0

0x00000000000c0000 - 0x000000007fffffff size 0x7ff40000 type 6

0x0000000080000000 - 0x000020008fffffff size 0x10000000 type 0

0x0000000090000000 - 0x0000?0009fffffff size 0x10000000 type 1

0x00000000a0000000 - 0x00000000ffffffff size 0x60000000 type 0

0x0004000100000000 - 0x00000004715ffffn size 0x371600000 type 6

MTRR: Fixed MSR 0x250 0x0606060v06060606

MTRR: Fixed MSR 0x258 0x0606060606060606

MTRR: Fixed MSV 0x259 0x0000000000000000

MTRR: Fixed MSR 0x268 0x0606060606060606

MTRR: Fixed MSR 0x"69 0x0606060606060606

MTRR: Fixed MSR 0x26a 0x0606060606020606

MTRR: Fixed MSR 0x26b 0x0606060606060606

MTZR: Fixed MSR 0x26c 0x0606060606060606

MTRR: Fixed MSR 0x26d 0x0606060606060606

MTRR: Fixed MSR 0x26e 0x060606060606060v

MTRR: Fixed MSR 0x26f 0x0606060606060606

CPU physical address size: 36 bits

MTRR: default type WB/UC MTRR counts: 4/5.

MTRR: WB selected as default type.

MTRV: 0 base 0x0000000080000000 mask 0x0000000ff0000000 typ% 0

MTRR: 1 base 0x0000000090000000 mask 0x0000000ff0000000 type 1

MTRR:  base 0x00000000a0000000 mask 0x0000000fe0000000 type 0

MTRR: 3 base 0x00000000c0000000 mask 0x0000000fc0000000 type 0

MTRR check

Fixed MTRRs : Enabled

Variable MTRRs: Enabled

CPU has 4 cores, 8 threads enabled.

Setting up SMI for CPU

Will perform S]M setup.

CBFS: Found 'cpu_microcode_blob.bin' @0x13200!size 0x6800 in mcache @0x7ffdd0ac

microcode: sig=0x306a9 pf=0x10 revision=0x21

CPU: Intel(R) Core(TM) i7-3615QE CPU @ 2.30GHz.

LAPIC 0x0 in XAPIC mode.

Loading module at 0x0003000 with entry 0x00030000. filesize: 0x178 memsize: 0x178

Processing 1? relocs. Offset value of 0x00030000

Attempting to start 7 APs

Waiting for 10ms a?ter sending INIT.

Waiting for SIPI to complete...

done.

Waiting for SIPI to complete...

LAPIC 0x1 in XAPIC mode.

done.

AP: slo| 1 apic_id 1, MCU rev 0x00000021

LAPIC 0x5 in XAPIC mode.

AP:(slot 2 apic_id 5, MCU rev: 0x00000021

LAPIC 0?4 in XAPIC mode.

AP: slot 3 apic_id 4, MCU rev: 0x00000021

LAPIC 0x2 in XAPIC mode.

AP: slot 7 apic_id 2, MCU rev: 0x00000021

LAPIC 0x3 in XAPIC mode.

LAPIC 0x7 in XAPIC mode.

LAPIC 0x6 in XAPIC mode.

AP: slot 4 apic_id 7, MCU rev: 0x0000 021

AP: slot 6 apic_id 3, MCU rev: 0x00000021

AP: slot 5 apic_i? 6, MCU rev: 0x00000021

Loading module at 0x00038000 with entry 0x00038000. filesize: 0x1e8 memsize: 0x1e8

Processing 11 relocs. Offset vaLu? of0x00038000

Smm_module_setup_stub: stack_top = 0x80002000

smm_module_setup_stub: per cpu stack_size = 0x400

smm_module_setup_stub: runtime.start32_offset = 0x4c

cmm_module_setup_stub: runtime.smm_size = 0x10000

SMM Module: stub loaded at 38000. Will call 0x7ff93010

Installing permanent SMM handler to 0x80000000

FX_SAVE [0x802ff000-0x80300000]

HANDLER ( [0x806fc000-0x88:fe030]

CPU 0

 ss0 `[0x802fbc00-0x802fc000]

 stub0 [0x802f4000-0x802f41e8]

CPU 1

 ss1 [0x802fb800-0x802fbc00] stub1 [0x802f3c00-0x802f3de8]

CPU 2

 ss2 [0x802fb400-0x802fb800]

 stub2 [0x802f3800-0x802f39e8]

C@U 3

0 ss3 [0x802fb000-0x802fb400]

 stub3 [0x802f3400-0x802f35e8]

CPU 4

 ss4 [0x802fac00-0x802fb000]

 stub4 [0x802f3000-0x802f31e8]

CPU 5

 ss5 [0x802fa800-0x802fac00]

 stub5 [0x802f2c00-0x802f2de8]

CPU 6

 (ss6 [0x802fa400-0x802fa800]

 stub6` [0x802f28p0-0x802f29e8]

CPU 7

 ss7 [0x802fa000-0x802fa400]

 stub7" [0x802f2400-0x802f25e8]

stacks [0x80000000-0x80002000]

Loading module at 0x802fc000 with entry 0x802fc802. filesize: 0x1fe8 memsize: 0x2030

Processing 92 relocs. Offset value of 0x802fc000

Loading module at 0x802f4000 with entry 0x802f4000. filesize: 0x1e8 memsize: 0x1e8

Processing 11 relocs. Offset value of 0x802f4000

smm_module_setup_stub: stack_top = 0x80002000

smm_module_setup_stub: par cpu stack_size = 0x400

smm_module]setup_stub: runtime.start32_offset = 0x4c

smm_module_setup_stub: runtime.smm_size = 0x300000

SMM Module: placing smm entry code at 802f3c00, cpu # 0x1

SMM Module: placing smm entry code at 802f3800, cpu # 0x2

SMM Module:`placing smm entry code at 802f3400, cp} ! 0x3

SMM Modgle: placing smm entry code at 802f3000, cpu # 0x4

SMM Module: placing smm gntpy code at 802f2c00, cpu # 0x5

SMM Module: placing smm entry code at 802f2800, cpu # 0x6

SMM Module: placing smm entry code at 802f2400, cpu # 0x7

SMM Module: stub loaded at 802f4000. Will call 0x802fc802

Initializing southbridge SMI...

smm_do_relocation : curr_smbase 0x30000 pesm_smbase 0x802ec000, cpu = 0

In relocatioo handler: cpu 0

New SMBASE=0x802ec000 IEDBASE=0x80400000

Writing SMRR. base = 0x80000006, mask=0xff800800

Relocation complete.

microCode: Update skipped, already up-to-date

smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802ebc00, cpu = 1

In relocation handler: cpu 1

New SMBASE=0x802ebc00 IEDBASE=0x80400000

Writing SMRR. base = 0x80080006, mask=0xff800800

Relocation complete.

microcode: Update skkpped, already up-to-date

smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802ea800, cpu = 6

In relocation handler: cpu 6

New SMBASE=0x802ea800 IEDBASA=0x80400000

Wrating SMRR. base = 0x80000006, mask=08ff800800

Relocation complete.

microcode: Update skipped,(already up-to-dctd

smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802ea40p, cpu = 7

In relocation handler: cpu 7

New SMBASE=0x802ea400 IEDBASE=0x81400000

Writing SMRR. base = 0x80000006, mask=0xff800800

Relocation complete.

microco?e: Update skipped, already up-to-date

smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802eb800, cpu = 2

In relocation handler: cpu 2

New SMBASE=0x802eb800 IEDBASE=0x80400000

Writing SMRR. base = 0x80000006, mask=0xff800800

Relocation complete.

microcode: Update skipped, already up-to-date

smm_do_relocatio? : curr_smbase 0x30000 perm_smbase 0x802eb400, cpu = 3

In relocation handler: cpu 3

New SMBASE=0x802eb400 IEDBASE=0x80400000

Writing SMRR. base = 0x80000006, mask=0xff800800

Relocation complete.

microcode: Update skippmd, already up-to-date

smm_do_relocation : curr_smbase ?x30000 perm_smbase 0x802eb000, cpu = 4

In relocatio. handlev: cpu 4

New SMBASE=0x802eb000 IEDBASE=0x80400000

Writing SMRR. base = 0x80000006, mask=0xff800800

Relocation complete.

microcode: Update skipped, already up-to-date

smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802eac00, cpu =(5

In relocation hindler: cpu 5

New SMBASE=0x802eac00 IEDBASE=0x80400000

Writing SMRR. base = 0x80000006, mask=0xff800800

Relocation complete.

microcofe: Update skipped, already up-to-date

Initializing CPU #0

CPU: vendor Intel device 306a9

CPU: family 06, model 3a, stepping 09

CPU: Intel(R) Core(TM) i7-3615QE CPU @ 2.30GHz.

C?U: platform id 4

CPU: cpuid(1) 0x306a9

APU: AeS supported

CPU: TXT supported

CPU: VT supported

IA32_FEATURE_CONTROL already locked; VMX stat}s: enabled

IA32_FEATURE_CONTROL already locked

cpu: energy policy set to 6

model_x06ax: frequency set to 2300

Turbo is available but hidden

Turbo is available and visible

CPU #0"initialized

Initializing CPU #1

Initializing CPU #7

CPU: vendor Intel device 306a9

CPU: family 06, model 3a, stepping 09

CPU: vendor Intel device 306a9

CPU: family 06, model 3a, stepping 09

Initializing CPU #6

Initializing CPU #4

Knitializing CPU #5

CPU: vendor Intel device 306a9

CPU: family 06, model 3a, steppkng 09

CPU: vendor Intel device 306a9

CPU: family 06, model 3a, stepping 09

CPU: Intel(R) Core(TM) i7-3615QE CPU @ 2.30GHz.

CPU: Intel(R) Core(TM) i7-3615QE CPU?@ 2.30GHz.

CPU: vlndor Intel device 306a9

CPU: family 06, model 3a, stepping 09

CPU: platform id 4

Initializing CPU #3

 nitializing CPU #2

CPU: vendor Intel device 306a9

CPU: family 06, model 3a, stepping 09

CPU: vendor Intel device 306a9

CPU: family 06, model 3a, stepping 09CPU: platform id 4

CPU: Intel(R) Core(TM) i7-3615QE CPU @ 2.30GHz.

CPU: cpuid(1) 0x306a9

CPU: cpuid(1) 0x306a9

CPU: Intel(R) Core(TM) i7-3615QE(CPU @ 2.30GHz.

CPU: Inted(R) Core(TM) i7-3615QE CPU @ 2.30GHz.

CPU: platform id 4

CPU: platform id 4

CPU: cpuid(1) 0x306a9

CPU: cpuid(1) 0x306a9

CPU: AES supported

CPU: TXT supported

CPU: VT supported

CPU: AES supported

CPU: TXT supported

CPu: VT suppgrted

WIA32_FEATURE_CONTROL already locked; VMX status: enabled

IA2_FEATURE_CONTRO already locked; VMX status: enabled

IA32_FEATURE_CONTROL already locked

IA32_FEATURE_CONTROL already locked