coreboot

[ 0.000000] Linux version 6.5.0-4-amd64 (debian-kernel@lists.debian.org) (gcc-13 (Debian 13.2.0-6) 13.2.0, GNU ld (GNU Binutils for Debian) 2.41) #1 SMP PREEMPT_DYNAMIC Debian 6.5.10-1 (2023-11-03)

[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.5.0-4-amd64 root=/dev/mapper/TP--230t--vg-root ro iomem=relaxed scsi_mod.scan=sync

[ 0.000000] BIOS-provided physical RAM map:

[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable

[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved

[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007edb1fff] usable

[ 0.000000] BIOS-e820: [mem 0x000000007edb2000-0x000000007ef19fff] reserved

[ 0.000000] BIOS-e820: [mem 0x000000007ef1a000-0x000000007ff1efff] usable

[ 0.000000] BIOS-e820: [mem 0x000000007ff1f000-0x000000008e9fffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved

[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004715fffff] usable

[ 0.000000] NX (Execute Disable) protection: active

[ 0.000000] SMBIOS 3.0.0 present.

[ 0.000000] DMI: LENOVO 20OJKGY/20OJKGY, BIOS CBET4000 4.21 08/22/2023

[ 0.000000] tsc: Fast TSC calibration using PIT

[ 0.000000] tsc: Detected 2294.851 MHz processor

[ 0.001508] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[ 0.001512] e820: remove [mem 0x000a0000-0x000fffff] usable

[ 0.001519] last_pfn = 0x471600 max_arch_pfn = 0x400000000

[ 0.001525] MTRR map: 7 entries (3 fixed + 4 variable; max 23), built from 10 variable MTRRs

[ 0.001527] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT

[ 0.001834] x2apic: enabled by BIOS, switching to x2apic ops

[ 0.001835] last_pfn = 0x7ff1f max_arch_pfn = 0x400000000

[ 0.015221] RAMDISK: [mem 0x2d39b000-0x329c4fff]

[ 0.015228] ACPI: Early table checksum verification disabled

[ 0.015232] ACPI: RSDP 0x00000000000F5FF0 000024 (v02 COREv4)

[ 0.015237] ACPI: XSDT 0x000000007FF4B0E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20230628)

[ 0.015244] ACPI: FACP 0x000000007FF4EBB0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20230628)

[ 0.015250] ACPI: DSDT 0x000000007FF4B280 003924 (v02 COREv4 COREBOOT 20110725 INTL 20230628)

[ 0.015255] ACPI: FACS 0x000000007FF4B240 000040

[ 0.015258] ACPI: FACS 0x000000007FF4B240 000040

[ 0.015262] ACPI: SSDT 0x000000007FF4ECD0 002E4B (v02 COREv4 COREBOOT 00000000 CORE 20230628)

[ 0.015265] ACPI: MCFG 0x000000007FF51B20 00003C (v01 COREv4 COREBOOT 00000000 CORE 20230628)

[ 0.015269] ACPI: TCPA 0x000000007FF51B60 000032 (v02 COREv4 COREBOOT 00000000 CORE 20230628)

[ 0.015273] ACPI: APIC 0x000000007FF51BA0 00009E (v03 COREv4 COREBOOT 00000000 CORE 20230628)

[ 0.015277] ACPI: DMAR 0x000000007FF51C40 0000C0 (v01 COREv4 COREBOOT 00000000 CORE 20230628)

[ 0.015281] ACPI: HPET 0x000000007FF51D00 000038 (v01 COREv4 COREBOOT 00000000 CORE 20230628)

[ 0.015284] ACPI: Reserving FACP table memory at [mem 0x7ff4ebb0-0x7ff4ecc3]

[ 0.015286] ACPI: Reserving DSDT table memory at [mem 0x7ff4b280-0x7ff4eba3]

[ 0.015287] ACPI: Reserving FACS table memory at [mem 0x7ff4b240-0x7ff4b27f]

[ 0.015288] ACPI: Reserving FACS table memory at [mem 0x7ff4b240-0x7ff4b27f]

[ 0.015289] ACPI: Reserving SSDT table memory at [mem 0x7ff4ecd0-0x7ff51b1a]

[ 0.015290] ACPI: Reserving MCFG table memory at [mem 0x7ff51b20-0x7ff51b5b]

[ 0.015291] ACPI: Reserving TCPA table memory at [mem 0x7ff51b60-0x7ff51b91]

[ 0.015292] ACPI: Reserving APIC table memory at [mem 0x7ff51ba0-0x7ff51c3d]

[ 0.015293] ACPI: Reserving DMAR table memory at [mem 0x7ff51c40-0x7ff51cff]

[ 0.015294] ACPI: Reserving HPET table memory at [mem 0x7ff51d00-0x7ff51d37]

[ 0.015305] Setting APIC routing to cluster x2apic.

[ 0.015365] No NUMA configuration found

[ 0.015366] Faking a node at [mem 0x0000000000000000-0x00000004715fffff]

[ 0.015377] NODE_DATA(0) allocated [mem 0x4715c8000-0x4715f2fff]

[ 0.015708] Zone ranges:

[ 0.015709] DMA [mem 0x0000000000001000-0x0000000000ffffff]

[ 0.015712] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]

[ 0.015714] Normal [mem 0x0000000100000000-0x00000004715fffff]

[ 0.015715] Device empty

[ 0.015717] Movable zone start for each node

[ 0.015720] Early memory node ranges

[ 0.015721] node 0: [mem 0x0000000000001000-0x000000000009efff]

[ 0.015723] node 0: [mem 0x0000000000100000-0x000000007edb1fff]

[ 0.015724] node 0: [mem 0x000000007ef1a000-0x000000007ff1efff]

[ 0.015726] node 0: [mem 0x0000000100000000-0x00000004715fffff]

[ 0.015729] Initmem setup node 0 [mem 0x0000000000001000-0x00000004715fffff]

[ 0.015734] On node 0, zone DMA: 1 pages in unavailable ranges

[ 0.015762] On node 0, zone DMA: 97 pages in unavailable ranges

[ 0.019473] On node 0, zone DMA32: 360 pages in unavailable ranges

[ 0.019825] On node 0, zone Normal: 225 pages in unavailable ranges

[ 0.020130] On node 0, zone Normal: 27136 pages in unavailable ranges

[ 0.020139] Reserving Intel graphics memory at [mem 0x80a00000-0x8e9fffff]

[ 0.020343] ACPI: PM-Timer IO Port: 0x508

[ 0.020352] ACPI: X2APIC_NMI (uid[0xffffffff] high edge lint[0x1])

[ 0.020355] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])

[ 0.020367] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23

[ 0.020370] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)

[ 0.020373] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[ 0.020378] ACPI: Using ACPI (MADT) for SMP configuration information

[ 0.020379] ACPI: HPET id: 0x8086a701 base: 0xfed00000

[ 0.020384] TSC deadline timer available

[ 0.020386] smpboot: Allowing 8 CPUs, 0 hotplug CPUs

[ 0.020399] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]

[ 0.020401] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]

[ 0.020403] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]

[ 0.020404] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]

[ 0.020406] PM: hibernation: Registered nosave memory: [mem 0x7edb2000-0x7ef19fff]

[ 0.020408] PM: hibernation: Registered nosave memory: [mem 0x7ff1f000-0x8e9fffff]

[ 0.020409] PM: hibernation: Registered nosave memory: [mem 0x8ea00000-0xefffffff]

[ 0.020410] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]

[ 0.020411] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]

[ 0.020411] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]

[ 0.020412] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]

[ 0.020413] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfed91fff]

[ 0.020414] PM: hibernation: Registered nosave memory: [mem 0xfed92000-0xffffffff]

[ 0.020417] [mem 0x8ea00000-0xefffffff] available for PCI devices

[ 0.020418] Booting paravirtualized kernel on bare hardware

[ 0.020421] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns

[ 0.026369] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1

[ 0.026829] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144

[ 0.026836] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152

[ 0.026839] pcpu-alloc: [0] 0 1 2 3 4 5 6 7

[ 0.026863] Kernel command line: BOOT_IMAGE=/vmlinuz-6.5.0-4-amd64 root=/dev/mapper/TP--230t--vg-root ro iomem=relaxed scsi_mod.scan=sync

[ 0.026935] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.5.0-4-amd64", will be passed to user space.

[ 0.026959] random: crng init done

[ 0.028810] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)

[ 0.029797] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)

[ 0.029946] Fallback order for Node 0: 0

[ 0.029951] Built 1 zonelists, mobility grouping on. Total pages: 4068968

[ 0.029952] Policy zone: Normal

[ 0.029961] mem auto-init: stack:all(zero), heap alloc:on, heap free:off

[ 0.029971] software IO TLB: area num 8.

[ 0.054660] Memory: 2070832K/16534868K available (14336K kernel code, 2346K rwdata, 10340K rodata, 3920K init, 18144K bss, 497580K reserved, 0K cma-reserved)

[ 0.054995] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1

[ 0.055011] Kernel/User page tables isolation: enabled

[ 0.055054] ftrace: allocating 42178 entries in 165 pages

[ 0.063915] ftrace: allocated 165 pages with 4 groups

[ 0.064682] Dynamic Preempt: voluntary

[ 0.064727] rcu: Preemptible hierarchical RCU implementation.

[ 0.064729] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.

[ 0.064731] Trampoline variant of Tasks RCU enabled.

[ 0.064731] Rude variant of Tasks RCU enabled.

[ 0.064732] Tracing variant of Tasks RCU enabled.

[ 0.064733] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.

[ 0.064734] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8

[ 0.068403] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16

[ 0.068611] rcu: srcu_init: Setting srcu_struct sizes based on contention.

[ 0.068682] spurious 8259A interrupt: IRQ7.

[ 0.070207] Console: colour VGA+ 80x25

[ 0.070210] printk: console [tty0] enabled

[ 0.078087] ACPI: Core revision 20230331

[ 0.078217] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns

[ 0.078311] APIC: Switch to symmetric I/O mode setup

[ 0.078371] DMAR: Host address width 36

[ 0.078431] DMAR: DRHD base: 0x000000fed90000 flags: 0x0

[ 0.078497] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a

[ 0.078572] DMAR: DRHD base: 0x000000fed91000 flags: 0x1

[ 0.078636] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a

[ 0.078712] DMAR: RMRR base: 0x00000080800000 end: 0x0000008e9fffff

[ 0.078773] DMAR-IR: IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1

[ 0.078836] DMAR-IR: HPET id 0 under DRHD base 0xfed91000

[ 0.078896] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.

[ 0.079521] DMAR-IR: Enabled IRQ remapping in x2apic mode

[ 0.080062] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 0.098311] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2114355533e, max_idle_ns: 440795309542 ns

[ 0.098397] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.70 BogoMIPS (lpj=9179404)

[ 0.098504] CPU0: Thermal monitoring enabled (TM1)

[ 0.098589] process: using mwait in idle threads

[ 0.098652] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8

[ 0.098714] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0

[ 0.098779] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization

[ 0.098856] Spectre V2 : Mitigation: Retpolines

[ 0.098916] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch

[ 0.098991] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT

[ 0.099055] Spectre V2 : Enabling Restricted Speculation for firmware calls

[ 0.099118] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier

[ 0.099195] Spectre V2 : User space: Mitigation: STIBP via prctl

[ 0.099258] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl

[ 0.099336] MDS: Mitigation: Clear CPU buffers

[ 0.099395] MMIO Stale Data: Unknown: No mitigations

[ 0.099455] SRBDS: Vulnerable: No microcode

[ 0.099942] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'

[ 0.100017] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'

[ 0.100080] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'

[ 0.100144] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256

[ 0.100208] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.

[ 0.121656] Freeing SMP alternatives memory: 36K

[ 0.121722] pid_max: default: 32768 minimum: 301

[ 0.121837] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,integrity

[ 0.121931] landlock: Up and running.

[ 0.121987] Yama: disabled by default; enable with sysctl kernel.yama.*

[ 0.122072] AppArmor: AppArmor initialized

[ 0.122132] TOMOYO Linux initialized

[ 0.122194] LSM support for eBPF active

[ 0.122296] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)

[ 0.122389] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)

[ 0.122833] smpboot: CPU0: Intel(R) Core(TM) i7-3615QE CPU @ 2.30GHz (family: 0x6, model: 0x3a, stepping: 0x9)

[ 0.123091] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.

[ 0.123174] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.

[ 0.123266] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.

[ 0.123356] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.

[ 0.123452] ... version: 3

[ 0.123509] ... bit width: 48

[ 0.123568] ... generic registers: 4

[ 0.123626] ... value mask: 0000ffffffffffff

[ 0.123688] ... max period: 00007fffffffffff

[ 0.123750] ... fixed-purpose events: 3

[ 0.123808] ... event mask: 000000070000000f

[ 0.124043] signal: max sigframe size: 1776

[ 0.124123] Estimated ratio of average max frequency by base frequency (times 1024): 1380

[ 0.124229] rcu: Hierarchical SRCU implementation.

[ 0.124291] rcu: Max phase no-delay instances is 1000.

[ 0.125100] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.

[ 0.125270] smp: Bringing up secondary CPUs ...

[ 0.125465] smpboot: x86: Booting SMP configuration:

[ 0.125526] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7

[ 0.144395] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.

[ 0.150436] smp: Brought up 1 node, 8 CPUs

[ 0.150473] smpboot: Max logical packages: 1

[ 0.150533] smpboot: Total of 8 processors activated (36717.61 BogoMIPS)

[ 0.174427] node 0 deferred pages initialised in 24ms

[ 0.175760] devtmpfs: initialized

[ 0.175760] x86/mm: Memory block size: 128MB

[ 0.178875] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns

[ 0.178875] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)

[ 0.178875] pinctrl core: initialized pinctrl subsystem

[ 0.179373] NET: Registered PF_NETLINK/PF_ROUTE protocol family

[ 0.179711] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations

[ 0.179932] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations

[ 0.180161] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations

[ 0.180273] audit: initializing netlink subsys (disabled)

[ 0.180352] audit: type=2000 audit(1699318409.100:1): state=initialized audit_enabled=0 res=1

[ 0.180352] thermal_sys: Registered thermal governor 'fair_share'

[ 0.180352] thermal_sys: Registered thermal governor 'bang_bang'

[ 0.180352] thermal_sys: Registered thermal governor 'step_wise'

[ 0.180352] thermal_sys: Registered thermal governor 'user_space'

[ 0.180352] thermal_sys: Registered thermal governor 'power_allocator'

[ 0.180352] cpuidle: using governor ladder

[ 0.180352] cpuidle: using governor menu

[ 0.180352] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[ 0.180352] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)

[ 0.180352] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved as E820 entry

[ 0.180352] PCI: Using configuration type 1 for base access

[ 0.180352] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on

[ 0.182444] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.

[ 0.182529] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages

[ 0.182529] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page

[ 0.182565] ACPI: Added _OSI(Module Device)

[ 0.182565] ACPI: Added _OSI(Processor Device)

[ 0.182620] ACPI: Added _OSI(3.0 _SCP Extensions)

[ 0.182681] ACPI: Added _OSI(Processor Aggregator Device)

[ 0.185512] ACPI: 2 ACPI AML tables successfully acquired and loaded

[ 0.186905] ACPI: EC: EC started

[ 0.186905] ACPI: EC: interrupt blocked

[ 0.187191] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62

[ 0.187253] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions

[ 0.187329] ACPI: Interpreter enabled

[ 0.187404] ACPI: PM: (supports S0 S1 S3 S4 S5)

[ 0.187464] ACPI: Using IOAPIC for interrupt routing

[ 0.187543] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[ 0.187621] PCI: Ignoring E820 reservations for host bridge windows

[ 0.187819] ACPI: Enabled 1 GPEs in block 00 to 3F

[ 0.193355] ACPI: \_TZ_.THM0.FPWR: New power resource

[ 0.193724] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[ 0.193794] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]

[ 0.193905] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]

[ 0.193993] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge

[ 0.194149] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])

[ 0.194236] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d05ff])

[ 0.194571] PCI host bridge to bus 0000:00

[ 0.194633] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]

[ 0.194697] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]

[ 0.194761] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000cbfff window]

[ 0.194838] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000fffff window]

[ 0.194913] pci_bus 0000:00: root bus resource [mem 0x8ea00000-0xefffffff window]

[ 0.194989] pci_bus 0000:00: root bus resource [mem 0x471600000-0xfffffffff window]

[ 0.195064] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]

[ 0.195139] pci_bus 0000:00: root bus resource [bus 00-ff]

[ 0.195219] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000

[ 0.195386] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000

[ 0.195458] pci 0000:00:02.0: reg 0x10: [mem 0xfdc00000-0xfdffffff 64bit]

[ 0.195527] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]

[ 0.195604] pci 0000:00:02.0: reg 0x20: [io 0xefc0-0xefff]

[ 0.195680] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]

[ 0.195860] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330

[ 0.195942] pci 0000:00:14.0: reg 0x10: [mem 0xfd1d0000-0xfd1dffff 64bit]

[ 0.196075] pci 0000:00:14.0: PME# supported from D3hot D3cold

[ 0.196224] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000

[ 0.196300] pci 0000:00:19.0: reg 0x10: [mem 0xfd1e0000-0xfd1fffff]

[ 0.196369] pci 0000:00:19.0: reg 0x14: [mem 0xfd1cb000-0xfd1cbfff]

[ 0.196440] pci 0000:00:19.0: reg 0x18: [io 0xefa0-0xefbf]

[ 0.196562] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold

[ 0.196688] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320

[ 0.196765] pci 0000:00:1a.0: reg 0x10: [mem 0xfd1c8000-0xfd1c83ff]

[ 0.196911] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold

[ 0.197072] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300

[ 0.197151] pci 0000:00:1b.0: reg 0x10: [mem 0xfd1cc000-0xfd1cffff 64bit]

[ 0.197293] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

[ 0.197470] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400

[ 0.197685] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[ 0.197783] pci 0000:00:1c.0: Enabling MPC IRBNCE

[ 0.197847] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled

[ 0.198023] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400

[ 0.198236] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold

[ 0.198331] pci 0000:00:1c.1: Enabling MPC IRBNCE

[ 0.198392] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled

[ 0.198568] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400

[ 0.198786] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold

[ 0.198883] pci 0000:00:1c.2: Enabling MPC IRBNCE

[ 0.198945] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled

[ 0.199118] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320

[ 0.199195] pci 0000:00:1d.0: reg 0x10: [mem 0xfd1c7000-0xfd1c73ff]

[ 0.199344] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold

[ 0.199498] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100

[ 0.199775] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601

[ 0.199851] pci 0000:00:1f.2: reg 0x10: [io 0xef78-0xef7f]

[ 0.199919] pci 0000:00:1f.2: reg 0x14: [io 0xef6c-0xef6f]

[ 0.199986] pci 0000:00:1f.2: reg 0x18: [io 0xef70-0xef77]

[ 0.200055] pci 0000:00:1f.2: reg 0x1c: [io 0xef68-0xef6b]

[ 0.200122] pci 0000:00:1f.2: reg 0x20: [io 0xef80-0xef9f]

[ 0.200191] pci 0000:00:1f.2: reg 0x24: [mem 0xfd1c9000-0xfd1c97ff]

[ 0.200296] pci 0000:00:1f.2: PME# supported from D3hot

[ 0.200437] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500

[ 0.200517] pci 0000:00:1f.3: reg 0x10: [mem 0xfd1c6000-0xfd1c60ff 64bit]

[ 0.200599] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]

[ 0.200751] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000

[ 0.200833] pci 0000:00:1f.6: reg 0x10: [mem 0xfd1ca000-0xfd1cafff 64bit]

[ 0.201128] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.

[ 0.201200] pci 0000:01:00.0: [1180:e822] type 00 class 0x080501

[ 0.201733] pci 0000:01:00.0: reg 0x10: [mem 0xfd300000-0xfd3000ff]

[ 0.202111] pci 0000:01:00.0: supports D1 D2

[ 0.202171] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.202520] pci 0000:00:1c.0: PCI bridge to [bus 01]

[ 0.202588] pci 0000:00:1c.0: bridge window [mem 0xfd300000-0xfd3fffff]

[ 0.202848] pci 0000:02:00.0: [8086:2725] type 00 class 0x028000

[ 0.203013] pci 0000:02:00.0: reg 0x10: [mem 0xfd200000-0xfd203fff 64bit]

[ 0.203582] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold

[ 0.204219] pci 0000:00:1c.1: PCI bridge to [bus 02]

[ 0.204287] pci 0000:00:1c.1: bridge window [mem 0xfd200000-0xfd2fffff]

[ 0.204433] pci 0000:00:1c.2: PCI bridge to [bus 03-0b]

[ 0.204498] pci 0000:00:1c.2: bridge window [io 0xf000-0xffff]

[ 0.204565] pci 0000:00:1c.2: bridge window [mem 0xfd400000-0xfdbfffff]

[ 0.204636] pci 0000:00:1c.2: bridge window [mem 0xff0000000-0xfffffffff 64bit pref]

[ 0.204899] ACPI: PCI: Interrupt link LNKA configured for IRQ 11

[ 0.205004] ACPI: PCI: Interrupt link LNKB configured for IRQ 11

[ 0.205105] ACPI: PCI: Interrupt link LNKC configured for IRQ 11

[ 0.205205] ACPI: PCI: Interrupt link LNKD configured for IRQ 11

[ 0.205306] ACPI: PCI: Interrupt link LNKE configured for IRQ 11

[ 0.205406] ACPI: PCI: Interrupt link LNKF configured for IRQ 11

[ 0.205506] ACPI: PCI: Interrupt link LNKG configured for IRQ 11

[ 0.205603] ACPI: PCI: Interrupt link LNKH configured for IRQ 11

[ 0.206698] ACPI: EC: interrupt unblocked

[ 0.206759] ACPI: EC: event unblocked

[ 0.206817] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62

[ 0.206878] ACPI: EC: GPE=0x11

[ 0.206933] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC initialization complete

[ 0.206999] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events

[ 0.207155] iommu: Default domain type: Translated

[ 0.207155] iommu: DMA domain TLB invalidation policy: lazy mode

[ 0.207155] pps_core: LinuxPPS API ver. 1 registered

[ 0.207155] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

[ 0.207155] PTP clock support registered

[ 0.207155] EDAC MC: Ver: 3.0.0

[ 0.207155] NetLabel: Initializing

[ 0.207155] NetLabel: domain hash size = 128

[ 0.207155] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO

[ 0.207155] NetLabel: unlabeled traffic allowed by default

[ 0.207155] PCI: Using ACPI for IRQ routing

[ 0.208746] PCI: pci_cache_line_size set to 64 bytes

[ 0.208750] pci 0000:00:1c.0: can't claim BAR 14 [mem 0xfd300000-0xfd3fffff]: no compatible bridge window

[ 0.208832] pci 0000:00:1c.1: can't claim BAR 14 [mem 0xfd200000-0xfd2fffff]: no compatible bridge window

[ 0.208911] pci 0000:00:1c.2: can't claim BAR 14 [mem 0xfd400000-0xfdbfffff]: no compatible bridge window

[ 0.208990] pci 0000:00:02.0: can't claim BAR 0 [mem 0xfdc00000-0xfdffffff 64bit]: no compatible bridge window

[ 0.210474] pci 0000:00:14.0: can't claim BAR 0 [mem 0xfd1d0000-0xfd1dffff 64bit]: no compatible bridge window

[ 0.210556] pci 0000:00:19.0: can't claim BAR 0 [mem 0xfd1e0000-0xfd1fffff]: no compatible bridge window

[ 0.210635] pci 0000:00:19.0: can't claim BAR 1 [mem 0xfd1cb000-0xfd1cbfff]: no compatible bridge window

[ 0.210715] pci 0000:00:1a.0: can't claim BAR 0 [mem 0xfd1c8000-0xfd1c83ff]: no compatible bridge window

[ 0.210795] pci 0000:00:1b.0: can't claim BAR 0 [mem 0xfd1cc000-0xfd1cffff 64bit]: no compatible bridge window

[ 0.210882] pci 0000:01:00.0: can't claim BAR 0 [mem 0xfd300000-0xfd3000ff]: no compatible bridge window

[ 0.210973] pci 0000:02:00.0: can't claim BAR 0 [mem 0xfd200000-0xfd203fff 64bit]: no compatible bridge window

[ 0.211055] pci 0000:00:1d.0: can't claim BAR 0 [mem 0xfd1c7000-0xfd1c73ff]: no compatible bridge window

[ 0.211136] pci 0000:00:1f.2: can't claim BAR 5 [mem 0xfd1c9000-0xfd1c97ff]: no compatible bridge window

[ 0.211217] pci 0000:00:1f.3: can't claim BAR 0 [mem 0xfd1c6000-0xfd1c60ff 64bit]: no compatible bridge window

[ 0.211300] pci 0000:00:1f.6: can't claim BAR 0 [mem 0xfd1ca000-0xfd1cafff 64bit]: no compatible bridge window

[ 0.211412] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]

[ 0.211414] e820: reserve RAM buffer [mem 0x7edb2000-0x7fffffff]

[ 0.211416] e820: reserve RAM buffer [mem 0x7ff1f000-0x7fffffff]

[ 0.211418] e820: reserve RAM buffer [mem 0x471600000-0x473ffffff]

[ 0.211439] pci 0000:00:02.0: vgaarb: setting as boot VGA device

[ 0.211439] pci 0000:00:02.0: vgaarb: bridge control possible

[ 0.211439] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none

[ 0.211439] vgaarb: loaded

[ 0.212183] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0

[ 0.212257] hpet0: 8 comparators, 64-bit 14.318180 MHz counter

[ 0.215445] clocksource: Switched to clocksource tsc-early

[ 0.215663] VFS: Disk quotas dquot_6.6.0

[ 0.215736] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[ 0.215940] AppArmor: AppArmor Filesystem Enabled

[ 0.216021] pnp: PnP ACPI init

[ 0.216148] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved

[ 0.216353] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved

[ 0.216419] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved

[ 0.216483] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved

[ 0.216548] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved

[ 0.216611] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved

[ 0.216674] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved

[ 0.216737] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved

[ 0.216801] system 00:01: [mem 0x20000000-0x201fffff] could not be reserved

[ 0.216866] system 00:01: [mem 0x40000000-0x401fffff] could not be reserved

[ 0.217075] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved

[ 0.217075] system 00:03: [io 0x0500-0x057f] has been reserved

[ 0.217075] system 00:03: [io 0x0480-0x04bf] has been reserved

[ 0.217075] pnp: PnP ACPI: found 8 devices

[ 0.222775] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

[ 0.222939] NET: Registered PF_INET protocol family

[ 0.223173] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)

[ 0.227211] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)

[ 0.227326] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)

[ 0.227475] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)

[ 0.227810] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)

[ 0.228208] TCP: Hash tables configured (established 131072 bind 65536)

[ 0.228372] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)

[ 0.228505] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)

[ 0.228618] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)

[ 0.228765] NET: Registered PF_UNIX/PF_LOCAL protocol family

[ 0.228834] NET: Registered PF_XDP protocol family

[ 0.228904] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03-0b] add_size 200000 add_align 100000

[ 0.228998] pci 0000:00:02.0: BAR 0: assigned [mem 0x471800000-0x471bfffff 64bit]

[ 0.229079] pci 0000:00:1c.0: BAR 14: assigned [mem 0x8ea00000-0x8eafffff]

[ 0.229144] pci 0000:00:1c.1: BAR 14: assigned [mem 0x8eb00000-0x8ebfffff]

[ 0.229210] pci 0000:00:1c.2: BAR 14: assigned [mem 0x8ec00000-0x8edfffff]

[ 0.229272] pci 0000:00:19.0: BAR 0: assigned [mem 0x8ee00000-0x8ee1ffff]

[ 0.229341] pci 0000:00:14.0: BAR 0: assigned [mem 0x471600000-0x47160ffff 64bit]

[ 0.229424] pci 0000:00:1b.0: BAR 0: assigned [mem 0x471610000-0x471613fff 64bit]

[ 0.229507] pci 0000:00:19.0: BAR 1: assigned [mem 0x8ee20000-0x8ee20fff]

[ 0.229571] pci 0000:00:1f.6: BAR 0: assigned [mem 0x471614000-0x471614fff 64bit]

[ 0.229656] pci 0000:00:1f.2: BAR 5: assigned [mem 0x8ee21000-0x8ee217ff]

[ 0.229723] pci 0000:00:1a.0: BAR 0: assigned [mem 0x8ee21800-0x8ee21bff]

[ 0.229791] pci 0000:00:1d.0: BAR 0: assigned [mem 0x8ee21c00-0x8ee21fff]

[ 0.229858] pci 0000:00:1f.3: BAR 0: assigned [mem 0x471615000-0x4716150ff 64bit]

[ 0.229941] pci 0000:01:00.0: BAR 0: assigned [mem 0x8ea00000-0x8ea000ff]

[ 0.230016] pci 0000:00:1c.0: PCI bridge to [bus 01]

[ 0.230081] pci 0000:00:1c.0: bridge window [mem 0x8ea00000-0x8eafffff]

[ 0.230155] pci 0000:02:00.0: BAR 0: assigned [mem 0x8eb00000-0x8eb03fff 64bit]

[ 0.230276] pci 0000:00:1c.1: PCI bridge to [bus 02]

[ 0.230343] pci 0000:00:1c.1: bridge window [mem 0x8eb00000-0x8ebfffff]

[ 0.230428] pci 0000:00:1c.2: PCI bridge to [bus 03-0b]

[ 0.230491] pci 0000:00:1c.2: bridge window [io 0xf000-0xffff]

[ 0.230557] pci 0000:00:1c.2: bridge window [mem 0x8ec00000-0x8edfffff]

[ 0.230625] pci 0000:00:1c.2: bridge window [mem 0xff0000000-0xfffffffff 64bit pref]

[ 0.230710] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]

[ 0.230775] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]

[ 0.230838] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000cbfff window]

[ 0.230902] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000fffff window]

[ 0.230965] pci_bus 0000:00: resource 8 [mem 0x8ea00000-0xefffffff window]

[ 0.231028] pci_bus 0000:00: resource 9 [mem 0x471600000-0xfffffffff window]

[ 0.231092] pci_bus 0000:00: resource 10 [mem 0xfed40000-0xfed44fff window]

[ 0.231156] pci_bus 0000:01: resource 1 [mem 0x8ea00000-0x8eafffff]

[ 0.231221] pci_bus 0000:02: resource 1 [mem 0x8eb00000-0x8ebfffff]

[ 0.231284] pci_bus 0000:03: resource 0 [io 0xf000-0xffff]

[ 0.231346] pci_bus 0000:03: resource 1 [mem 0x8ec00000-0x8edfffff]

[ 0.231408] pci_bus 0000:03: resource 2 [mem 0xff0000000-0xfffffffff 64bit pref]

[ 0.232183] PCI: CLS 64 bytes, default 64

[ 0.232259] DMAR: No ATSR found

[ 0.232314] Trying to unpack rootfs image as initramfs...

[ 0.232317] DMAR: No SATC found

[ 0.232318] DMAR: IOMMU feature pgsel_inv inconsistent

[ 0.232440] DMAR: IOMMU feature pass_through inconsistent

[ 0.232501] DMAR: dmar0: Using Queued invalidation

[ 0.232629] DMAR: dmar1: Using Queued invalidation

[ 0.314767] pci 0000:00:02.0: Adding to iommu group 0

[ 0.314888] pci 0000:00:00.0: Adding to iommu group 1

[ 0.314964] pci 0000:00:14.0: Adding to iommu group 2

[ 0.315036] pci 0000:00:19.0: Adding to iommu group 3

[ 0.315108] pci 0000:00:1a.0: Adding to iommu group 4

[ 0.315180] pci 0000:00:1b.0: Adding to iommu group 5

[ 0.315252] pci 0000:00:1c.0: Adding to iommu group 6

[ 0.315324] pci 0000:00:1c.1: Adding to iommu group 7

[ 0.315816] pci 0000:00:1c.2: Adding to iommu group 8

[ 0.315886] pci 0000:00:1d.0: Adding to iommu group 9

[ 0.315972] pci 0000:00:1f.0: Adding to iommu group 10

[ 0.316044] pci 0000:00:1f.2: Adding to iommu group 10

[ 0.316116] pci 0000:00:1f.3: Adding to iommu group 10

[ 0.316188] pci 0000:00:1f.6: Adding to iommu group 10

[ 0.316260] pci 0000:01:00.0: Adding to iommu group 11

[ 0.316332] pci 0000:02:00.0: Adding to iommu group 12

[ 0.317528] DMAR: Intel(R) Virtualization Technology for Directed I/O

[ 0.317597] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[ 0.317661] software IO TLB: mapped [mem 0x000000007adb2000-0x000000007edb2000] (64MB)

[ 0.318223] Initialise system trusted keyrings

[ 0.318294] Key type blacklist registered

[ 0.318419] workingset: timestamp_bits=36 max_order=22 bucket_order=0

[ 0.318503] zbud: loaded

[ 0.318763] integrity: Platform Keyring initialized

[ 0.318829] integrity: Machine keyring initialized

[ 0.318891] Key type asymmetric registered

[ 0.318950] Asymmetric key parser 'x509' registered

[ 0.993273] Freeing initrd memory: 88232K

[ 0.999329] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)

[ 0.999451] io scheduler mq-deadline registered

[ 1.000670] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26

[ 1.000977] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27

[ 1.001276] pcieport 0000:00:1c.2: PME: Signaling with IRQ 28

[ 1.001372] pcieport 0000:00:1c.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+

[ 1.001611] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[ 1.004134] thermal LNXTHERM:00: registered as thermal_zone0

[ 1.004199] ACPI: thermal: Thermal Zone [THM0] (66 C)

[ 1.005020] thermal LNXTHERM:01: registered as thermal_zone1

[ 1.005086] ACPI: thermal: Thermal Zone [THM1] (27 C)

[ 1.005291] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[ 1.006125] Linux agpgart interface v0.103

[ 1.010442] tpm_tis 00:07: 1.2 TPM (device-id 0x0, rev-id 78)

[ 1.078729] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.

[ 1.079861] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12

[ 1.083547] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 1.083614] serio: i8042 AUX port at 0x60,0x64 irq 12

[ 1.083817] mousedev: PS/2 mouse device common for all mice

[ 1.083901] rtc_cmos 00:04: RTC can wake from S4

[ 1.084245] rtc_cmos 00:04: registered as rtc0

[ 1.084341] rtc_cmos 00:04: setting system clock to 2023-11-07T00:53:30 UTC (1699318410)

[ 1.084445] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram

[ 1.084840] intel_pstate: Intel P-state driver initializing

[ 1.085693] ledtrig-cpu: registered to indicate activity on CPUs

[ 1.096525] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0

[ 1.097876] NET: Registered PF_INET6 protocol family

[ 1.104636] Segment Routing with IPv6

[ 1.104733] In-situ OAM (IOAM) with IPv6

[ 1.104872] mip6: Mobile IPv6

[ 1.104944] NET: Registered PF_PACKET protocol family

[ 1.105205] mpls_gso: MPLS GSO support

[ 1.106625] microcode: Microcode Update Driver: v2.2.

[ 1.106631] IPI shorthand broadcast: enabled

[ 1.107673] sched_clock: Marking stable (1096850985, 9749284)->(1109076740, -2476471)

[ 1.107864] registered taskstats version 1

[ 1.107988] Loading compiled-in X.509 certificates

[ 1.127131] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'

[ 1.127221] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'

[ 1.128772] Key type .fscrypt registered

[ 1.128843] Key type fscrypt-provisioning registered

[ 1.133710] Key type encrypted registered

[ 1.133834] AppArmor: AppArmor sha1 policy hashing enabled

[ 1.133927] ima: Allocated hash algorithm: sha256

[ 1.230871] ima: No architecture policies found

[ 1.230975] evm: Initialising EVM extended attributes:

[ 1.231047] evm: security.selinux

[ 1.231115] evm: security.SMACK64 (disabled)

[ 1.231186] evm: security.SMACK64EXEC (disabled)

[ 1.231256] evm: security.SMACK64TRANSMUTE (disabled)

[ 1.231326] evm: security.SMACK64MMAP (disabled)

[ 1.231397] evm: security.apparmor

[ 1.231464] evm: security.ima

[ 1.231531] evm: security.capability

[ 1.231599] evm: HMAC attrs: 0x1

[ 1.329767] tsc: Refined TSC clocksource calibration: 2294.787 MHz

[ 1.329835] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113f8b171d, max_idle_ns: 440795241185 ns

[ 1.329987] clocksource: Switched to clocksource tsc

[ 1.348558] RAS: Correctable Errors collector initialized.

[ 1.348775] clk: Disabling unused clocks

[ 1.351249] Freeing unused decrypted memory: 2036K

[ 1.352302] Freeing unused kernel image (initmem) memory: 3920K

[ 1.361802] Write protecting the kernel read-only data: 26624k

[ 1.362919] Freeing unused kernel image (rodata/data gap) memory: 1948K

[ 1.448382] x86/mm: Checked W+X mappings: passed, no W+X pages found.

[ 1.448447] x86/mm: Checking user space page tables

[ 1.490801] x86/mm: Checked W+X mappings: passed, no W+X pages found.

[ 1.490866] Run /init as init process

[ 1.490922] with arguments:

[ 1.490923] /init

[ 1.490924] with environment:

[ 1.490924] HOME=/

[ 1.490925] TERM=linux

[ 1.490926] BOOT_IMAGE=/vmlinuz-6.5.0-4-amd64

[ 1.699180] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input2

[ 1.711332] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20230331/utaddress-204)

[ 1.711437] ACPI: OSL: Resource conflict; ACPI support missing from driver?

[ 1.712028] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20230331/utaddress-204)

[ 1.712165] ACPI: OSL: Resource conflict; ACPI support missing from driver?

[ 1.712326] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20230331/utaddress-204)

[ 1.712467] ACPI: OSL: Resource conflict; ACPI support missing from driver?

[ 1.712537] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20230331/utaddress-204)

[ 1.712721] ACPI: OSL: Resource conflict; ACPI support missing from driver?

[ 1.712836] lpc_ich: Resource conflict(s) found affecting gpio_ich

[ 1.718745] ACPI: button: Sleep Button [SLPB]

[ 1.723781] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input3

[ 1.727619] ACPI: battery: Slot [BAT0] (battery present)

[ 1.727788] ACPI: button: Lid Switch [LID]

[ 1.727944] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4

[ 1.728500] ACPI: battery: Slot [BAT1] (battery absent)

[ 1.728750] ACPI: button: Power Button [PWRF]

[ 1.733005] e1000e: Intel(R) PRO/1000 Network Driver

[ 1.733071] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.

[ 1.733716] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode

[ 1.736075] cryptd: max_cpu_qlen set to 1000

[ 1.748078] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt

[ 1.750765] i2c i2c-0: 2/2 memory slots populated (from DMI)

[ 1.751335] i2c i2c-0: Successfully instantiated SPD at 0x50

[ 1.751920] i2c i2c-0: Successfully instantiated SPD at 0x51

[ 1.765911] ACPI: bus type drm_connector registered

[ 1.770073] sdhci: Secure Digital Host Controller Interface driver

[ 1.770138] sdhci: Copyright(c) Pierre Ossman

[ 1.772241] SCSI subsystem initialized

[ 1.778505] AVX version of gcm_enc/dec engaged.

[ 1.778568] ACPI: bus type USB registered

[ 1.778672] usbcore: registered new interface driver usbfs

[ 1.778744] AES CTR mode by8 optimization enabled

[ 1.778749] usbcore: registered new interface driver hub

[ 1.778886] usbcore: registered new device driver usb

[ 1.786306] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e822] (rev 7)

[ 1.786633] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes

[ 1.786886] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA

[ 1.788282] ehci-pci 0000:00:1d.0: EHCI Host Controller

[ 1.788356] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1

[ 1.788442] ehci-pci 0000:00:1d.0: debug port 2

[ 1.792445] ehci-pci 0000:00:1d.0: irq 18, io mem 0x8ee21c00

[ 1.802034] libata version 3.00 loaded.

[ 1.805772] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00

[ 1.806009] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05

[ 1.806097] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 1.806174] usb usb1: Product: EHCI Host Controller

[ 1.806238] usb usb1: Manufacturer: Linux 6.5.0-4-amd64 ehci_hcd

[ 1.806299] usb usb1: SerialNumber: 0000:00:1d.0

[ 1.806581] hub 1-0:1.0: USB hub found

[ 1.806673] hub 1-0:1.0: 3 ports detected

[ 1.807014] ehci-pci 0000:00:1a.0: EHCI Host Controller

[ 1.807082] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 2

[ 1.807165] ehci-pci 0000:00:1a.0: debug port 2

[ 1.811344] ehci-pci 0000:00:1a.0: irq 19, io mem 0x8ee21800

[ 1.825762] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00

[ 1.825871] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05

[ 1.825947] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 1.826018] usb usb2: Product: EHCI Host Controller

[ 1.826076] usb usb2: Manufacturer: Linux 6.5.0-4-amd64 ehci_hcd

[ 1.826579] usb usb2: SerialNumber: 0000:00:1a.0

[ 1.826760] hub 2-0:1.0: USB hub found

[ 1.826823] hub 2-0:1.0: 3 ports detected

[ 1.829393] xhci_hcd 0000:00:14.0: xHCI Host Controller

[ 1.829465] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3

[ 1.830656] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930

[ 1.830933] xhci_hcd 0000:00:14.0: xHCI Host Controller

[ 1.830997] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4

[ 1.831071] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed

[ 1.831179] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05

[ 1.831256] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 1.831331] usb usb3: Product: xHCI Host Controller

[ 1.831394] usb usb3: Manufacturer: Linux 6.5.0-4-amd64 xhci-hcd

[ 1.831456] usb usb3: SerialNumber: 0000:00:14.0

[ 1.831646] hub 3-0:1.0: USB hub found

[ 1.831715] hub 3-0:1.0: 4 ports detected

[ 1.832046] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05

[ 1.832124] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 1.832197] usb usb4: Product: xHCI Host Controller

[ 1.832257] usb usb4: Manufacturer: Linux 6.5.0-4-amd64 xhci-hcd

[ 1.832319] usb usb4: SerialNumber: 0000:00:14.0

[ 1.832502] hub 4-0:1.0: USB hub found

[ 1.832575] hub 4-0:1.0: 4 ports detected

[ 1.833288] ahci 0000:00:1f.2: version 3.0

[ 1.833519] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled

[ 1.843683] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode

[ 1.843718] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock

[ 1.843770] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst

[ 1.844617] scsi host0: ahci

[ 1.844824] scsi host1: ahci

[ 1.844977] scsi host2: ahci

[ 1.845178] scsi host3: ahci

[ 1.845344] scsi host4: ahci

[ 1.845493] scsi host5: ahci

[ 1.845594] ata1: SATA max UDMA/133 abar m2048@0x8ee21000 port 0x8ee21100 irq 31

[ 1.845666] ata2: SATA max UDMA/133 abar m2048@0x8ee21000 port 0x8ee21180 irq 31

[ 1.845737] ata3: SATA max UDMA/133 abar m2048@0x8ee21000 port 0x8ee21200 irq 31

[ 1.845839] ata4: DUMMY

[ 1.845895] ata5: DUMMY

[ 1.845949] ata6: DUMMY

[ 1.942068] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 54:ee:75:13:62:87

[ 1.942150] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection

[ 1.942253] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF

[ 2.061796] usb 1-1: new high-speed USB device number 2 using ehci-pci

[ 2.081791] usb 2-1: new high-speed USB device number 2 using ehci-pci

[ 2.089791] usb 3-1: new high-speed USB device number 2 using xhci_hcd

[ 2.160421] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[ 2.161329] ata1.00: supports DRM functions and may not be fully accessible

[ 2.161416] ata1.00: ATA-10: KINGSTON SKC6001024G, S4500109, max UDMA/133

[ 2.161558] ata1.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 32), AA

[ 2.162785] ata1.00: Features: Trust Dev-Sleep

[ 2.163102] ata1.00: supports DRM functions and may not be fully accessible

[ 2.164199] ata1.00: configured for UDMA/133

[ 2.174824] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC6001 0109 PQ: 0 ANSI: 5

[ 2.218505] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00

[ 2.218610] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 2.219245] hub 1-1:1.0: USB hub found

[ 2.219484] hub 1-1:1.0: 8 ports detected

[ 2.238129] usb 3-1: New USB device found, idVendor=045b, idProduct=0209, bcdDevice= 1.00

[ 2.238244] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 2.238389] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00

[ 2.238493] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 2.238955] hub 3-1:1.0: USB hub found

[ 2.239074] hub 3-1:1.0: 3 ports detected

[ 2.239475] hub 2-1:1.0: USB hub found

[ 2.239724] hub 2-1:1.0: 6 ports detected

[ 2.365981] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd

[ 2.388114] usb 4-1: New USB device found, idVendor=045b, idProduct=0210, bcdDevice= 1.00

[ 2.388218] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 2.389507] hub 4-1:1.0: USB hub found

[ 2.389848] hub 4-1:1.0: 3 ports detected

[ 2.488342] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[ 2.505802] usb 1-1.5: new full-speed USB device number 3 using ehci-pci

[ 2.513794] usb 3-3: new high-speed USB device number 3 using xhci_hcd

[ 2.516589] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133

[ 2.525794] usb 2-1.3: new full-speed USB device number 3 using ehci-pci

[ 2.525807] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA

[ 2.575501] ata2.00: configured for UDMA/133

[ 2.585050] scsi 1:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5

[ 2.605808] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]

[ 2.616483] usb 1-1.5: New USB device found, idVendor=056a, idProduct=00e6, bcdDevice= 1.39

[ 2.616598] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 2.616690] usb 1-1.5: Product: ISD-V4

[ 2.616758] usb 1-1.5: Manufacturer: Tablet

[ 2.635262] usb 2-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01

[ 2.635372] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 2.635464] usb 2-1.3: Product: Biometric Coprocessor

[ 2.635535] usb 2-1.3: Manufacturer: Auth

[ 2.635764] hid: raw HID events driver (C) Jiri Kosina

[ 2.642679] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]

[ 2.662091] usb 3-3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= 0.00

[ 2.662181] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 2.662896] hub 3-3:1.0: USB hub found

[ 2.663000] hub 3-3:1.0: 4 ports detected

[ 2.697791] usb 1-1.6: new full-speed USB device number 4 using ehci-pci

[ 2.714029] usb 2-1.4: new full-speed USB device number 4 using ehci-pci

[ 2.717160] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905

[ 2.717286] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0

[ 2.745824] usb 3-1.2: new high-speed USB device number 4 using xhci_hcd

[ 2.764752] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5

[ 2.816126] usb 1-1.6: New USB device found, idVendor=08e6, idProduct=34ec, bcdDevice= 1.00

[ 2.816231] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 2.816323] usb 1-1.6: Product: GemPC Express

[ 2.816393] usb 1-1.6: Manufacturer: Gemplus

[ 2.825737] usb 2-1.4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.11

[ 2.825862] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 2.825953] usb 2-1.4: Product: USB Receiver

[ 2.826024] usb 2-1.4: Manufacturer: Logitech

[ 2.850981] usb 3-1.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.12

[ 2.851090] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 2.851175] usb 3-1.2: Product: USB2.0 Hub

[ 2.851236] usb 3-1.2: Manufacturer: GenesysLogic

[ 2.852311] hub 3-1.2:1.0: USB hub found

[ 2.852813] hub 3-1.2:1.0: 4 ports detected

[ 2.854688] usbcore: registered new interface driver usbhid

[ 2.854769] usbhid: USB HID core driver

[ 2.900369] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 2.901193] ata3.00: supports DRM functions and may not be fully accessible

[ 2.901276] ata3.00: ATA-10: KINGSTON SKC600MS256G, S4800105, max UDMA/133

[ 2.901457] ata3.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA

[ 2.902730] ata3.00: Features: Trust Dev-Sleep

[ 2.903083] ata3.00: supports DRM functions and may not be fully accessible

[ 2.904070] ata3.00: configured for UDMA/133

[ 2.909788] usb 2-1.5: new full-speed USB device number 5 using ehci-pci

[ 2.914758] scsi 2:0:0:0: Direct-Access ATA KINGSTON SKC600M 0105 PQ: 0 ANSI: 5

[ 2.921550] e1000e 0000:00:19.0 eno0: renamed from eth0

[ 2.923843] input: Tablet ISD-V4 Stylus as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:056A:00E6.0001/input/input7

[ 2.924109] input: Tablet ISD-V4 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:056A:00E6.0001/input/input8

[ 2.924498] hid-generic 0003:056A:00E6.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input0

[ 2.925280] input: Tablet ISD-V4 Touchscreen as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:056A:00E6.0002/input/input9

[ 2.925474] input: Tablet ISD-V4 as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:056A:00E6.0002/input/input10

[ 2.925687] input: Tablet ISD-V4 Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:056A:00E6.0002/input/input11

[ 2.925978] hid-generic 0003:056A:00E6.0002: input,hiddev1,hidraw1: USB HID v1.11 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input1

[ 2.926368] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:046D:C52B.0003/input/input12

[ 2.933901] usb 4-1.2: new SuperSpeed USB device number 3 using xhci_hcd

[ 2.939570] sd 2:0:0:0: [sdc] 500118192 512-byte logical blocks: (256 GB/238 GiB)

[ 2.939573] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)

[ 2.939596] sd 0:0:0:0: [sda] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB)

[ 2.939599] sd 0:0:0:0: [sda] 4096-byte physical blocks

[ 2.939615] sd 0:0:0:0: [sda] Write Protect is off

[ 2.939617] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 2.939642] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 2.939697] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes

[ 2.940058] sd 2:0:0:0: [sdc] 4096-byte physical blocks

[ 2.940129] sd 1:0:0:0: [sdb] 4096-byte physical blocks

[ 2.940210] sd 2:0:0:0: [sdc] Write Protect is off

[ 2.940309] sd 1:0:0:0: [sdb] Write Protect is off

[ 2.940324] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00

[ 2.940353] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 2.940398] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00

[ 2.940516] sd 2:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes

[ 2.940583] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 2.940981] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes

[ 2.941117] sdc: sdc1 sdc2 sdc3

[ 2.941387] sd 2:0:0:0: [sdc] supports TCG Opal

[ 2.941452] sd 2:0:0:0: [sdc] Attached SCSI disk

[ 2.942018] sda: sda1 sda2 < sda5 >

[ 2.942354] sd 0:0:0:0: [sda] supports TCG Opal

[ 2.942413] sd 0:0:0:0: [sda] Attached SCSI disk

[ 2.948394] sdb: sdb1

[ 2.948558] sd 1:0:0:0: [sdb] Attached SCSI disk

[ 2.962717] usb 4-1.2: New USB device found, idVendor=05e3, idProduct=0612, bcdDevice=92.12

[ 2.962795] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 2.962867] usb 4-1.2: Product: USB3.0 Hub

[ 2.962921] usb 4-1.2: Manufacturer: GenesysLogic

[ 2.963807] hub 4-1.2:1.0: USB hub found

[ 2.964158] hub 4-1.2:1.0: 4 ports detected

[ 2.989995] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input0

[ 2.990332] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:046D:C52B.0004/input/input13

[ 2.990520] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:046D:C52B.0004/input/input14

[ 3.020239] usb 2-1.5: New USB device found, idVendor=8087, idProduct=0032, bcdDevice= 0.00

[ 3.020315] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 3.037796] usb 3-1.3: new full-speed USB device number 5 using xhci_hcd

[ 3.049850] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:046D:C52B.0004/input/input15

[ 3.050081] hid-generic 0003:046D:C52B.0004: input,hiddev2,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input1

[ 3.050487] hid-generic 0003:046D:C52B.0005: hiddev3,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input2

[ 3.097764] usb 2-1.6: new high-speed USB device number 6 using ehci-pci

[ 3.141265] usb 3-1.3: New USB device found, idVendor=056d, idProduct=4027, bcdDevice=80.00

[ 3.141342] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 3.141411] usb 3-1.3: Product: EIZO USB HID Monitor

[ 3.141468] usb 3-1.3: Manufacturer: EIZO

[ 3.146268] hid-generic 0003:056D:4027.0006: hiddev4,hidraw5: USB HID v1.10 Device [EIZO EIZO USB HID Monitor] on usb-0000:00:14.0-1.3/input0

[ 3.213707] usb 2-1.6: New USB device found, idVendor=04f2, idProduct=b2ea, bcdDevice= 5.20

[ 3.213811] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 3.213879] usb 2-1.6: Product: Integrated Camera

[ 3.213935] usb 2-1.6: Manufacturer: Chicony Electronics Co., Ltd.

[ 3.217772] usb 3-3.3: new full-speed USB device number 6 using xhci_hcd

[ 3.318629] usb 3-3.3: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00

[ 3.318705] usb 3-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 3.318776] usb 3-3.3: Product: USB-Serial Controller D

[ 3.318833] usb 3-3.3: Manufacturer: Prolific Technology Inc.

[ 3.398072] usb 4-1.2.4: new SuperSpeed USB device number 4 using xhci_hcd

[ 3.421375] usb 4-1.2.4: New USB device found, idVendor=05e3, idProduct=0748, bcdDevice=12.09

[ 3.421452] usb 4-1.2.4: New USB device strings: Mfr=3, Product=4, SerialNumber=2

[ 3.421523] usb 4-1.2.4: Product: USB Storage

[ 3.421579] usb 4-1.2.4: Manufacturer: Generic

[ 3.421636] usb 4-1.2.4: SerialNumber: 000000001209

[ 3.460340] usb-storage 4-1.2.4:1.0: USB Mass Storage device detected

[ 3.460604] scsi host6: usb-storage 4-1.2.4:1.0

[ 3.460770] usbcore: registered new interface driver usb-storage

[ 3.462353] i915 0000:00:02.0: [drm] VT-d active for gfx access

[ 3.462439] i915 0000:00:02.0: vgaarb: deactivate vga console

[ 3.462570] usbcore: registered new interface driver uas

[ 3.462862] Console: switching to colour dummy device 80x25

[ 3.462929] i915 0000:00:02.0: [drm] Using Transparent Hugepages

[ 3.462933] i915 0000:00:02.0: [drm] DMAR active, disabling use of stolen memory

[ 3.474179] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3

[ 3.501846] usb 3-3.4: new high-speed USB device number 7 using xhci_hcd

[ 3.514738] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem

[ 3.558313] input: Wacom ISDv4 E6 Pen as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:056A:00E6.0001/input/input17

[ 3.571361] i915 0000:00:02.0: [drm] Skipping intel_backlight registration

[ 3.571840] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

[ 3.572045] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

[ 3.572123] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input20

[ 3.578321] wacom 0003:056A:00E6.0001: hidraw0: USB HID v1.11 Device [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input0

[ 3.578957] input: Wacom ISDv4 E6 Finger as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:056A:00E6.0002/input/input22

[ 3.610190] usb 3-3.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11

[ 3.610217] usb 3-3.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0

[ 3.610226] usb 3-3.4: Product: USB 2.0 Hub

[ 3.610915] hub 3-3.4:1.0: USB hub found

[ 3.611014] hub 3-3.4:1.0: 4 ports detected

[ 3.715017] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6

[ 3.734248] wacom 0003:056A:00E6.0002: hidraw1: USB HID v1.11 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input1

[ 3.735311] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input2

[ 3.861455] input: Logitech Wireless Device PID:406f Keyboard as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.4/2-1.4:1.2/0003:046D:C52B.0005/0003:046D:406F.0007/input/input24

[ 3.868050] input: Logitech Wireless Device PID:406f Mouse as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.4/2-1.4:1.2/0003:046D:C52B.0005/0003:046D:406F.0007/input/input25

[ 3.868871] hid-generic 0003:046D:406F.0007: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Device PID:406f] on usb-0000:00:1a.0-1.4/input2:1

[ 4.001852] usb 3-3.4.1: new full-speed USB device number 8 using xhci_hcd

[ 4.090317] input: Logitech MX Ergo as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.4/2-1.4:1.2/0003:046D:C52B.0005/0003:046D:406F.0007/input/input29

[ 4.090809] logitech-hidpp-device 0003:046D:406F.0007: input,hidraw3: USB HID v1.11 Keyboard [Logitech MX Ergo] on usb-0000:00:1a.0-1.4/input2:1

[ 4.222760] usb 3-3.4.1: New USB device found, idVendor=0557, idProduct=8021, bcdDevice= 1.00

[ 4.222786] usb 3-3.4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 4.225674] hub 3-3.4.1:1.0: USB hub found

[ 4.225892] hub 3-3.4.1:1.0: 4 ports detected

[ 4.358136] acpi device:0d: registered as cooling_device9

[ 4.425802] usb 3-3.4.2: new full-speed USB device number 9 using xhci_hcd

[ 4.467728] scsi 6:0:0:0: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6

[ 4.468848] sd 6:0:0:0: [sdd] Media removed, stopped polling

[ 4.469354] sd 6:0:0:0: [sdd] Attached SCSI removable disk

[ 4.470103] scsi 6:0:0:1: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6

[ 4.471444] sd 6:0:0:1: [sde] Media removed, stopped polling

[ 4.471903] sd 6:0:0:1: [sde] Attached SCSI removable disk

[ 4.472800] scsi 6:0:0:2: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6

[ 4.477029] sd 6:0:0:2: [sdf] Media removed, stopped polling

[ 4.477495] sd 6:0:0:2: [sdf] Attached SCSI removable disk

[ 4.477624] scsi 6:0:0:3: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6

[ 4.479236] sd 6:0:0:3: [sdg] Media removed, stopped polling

[ 4.479776] sd 6:0:0:3: [sdg] Attached SCSI removable disk

[ 4.480551] scsi 6:0:0:4: Direct-Access Generic MassStorageClass 1209 PQ: 0 ANSI: 6

[ 4.482335] sd 6:0:0:4: [sdh] Media removed, stopped polling

[ 4.482792] sd 6:0:0:4: [sdh] Attached SCSI removable disk

[ 4.508620] fbcon: i915drmfb (fb0) is primary device

[ 4.650248] usb 3-3.4.2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11

[ 4.650260] usb 3-3.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 4.650264] usb 3-3.4.2: Product: USB Receiver

[ 4.650266] usb 3-3.4.2: Manufacturer: Logitech

[ 4.667654] logitech-djreceiver 0003:046D:C52B.000A: hiddev1,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3.4.2/input2

[ 4.729850] usb 3-3.4.1.1: new full-speed USB device number 10 using xhci_hcd

[ 4.796071] input: Logitech MX Ergo as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4.2/3-3.4.2:1.2/0003:046D:C52B.000A/0003:046D:406F.000B/input/input30

[ 4.796465] logitech-hidpp-device 0003:046D:406F.000B: input,hidraw6: USB HID v1.11 Keyboard [Logitech MX Ergo] on usb-0000:00:14.0-3.4.2/input2:1

[ 4.855918] usb 3-3.4.1.1: New USB device found, idVendor=04d9, idProduct=a0d1, bcdDevice= 1.00

[ 4.855929] usb 3-3.4.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 4.855933] usb 3-3.4.1.1: Product: Varmilo Keyboard

[ 4.855935] usb 3-3.4.1.1: Manufacturer: AONE

[ 4.875143] input: AONE Varmilo Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4.1/3-3.4.1.1/3-3.4.1.1:1.0/0003:04D9:A0D1.000C/input/input31

[ 4.934259] hid-generic 0003:04D9:A0D1.000C: input,hidraw7: USB HID v1.10 Keyboard [AONE Varmilo Keyboard] on usb-0000:00:14.0-3.4.1.1/input0

[ 4.946593] input: AONE Varmilo Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4.1/3-3.4.1.1/3-3.4.1.1:1.1/0003:04D9:A0D1.000D/input/input32

[ 5.006094] hid-generic 0003:04D9:A0D1.000D: input,hidraw8: USB HID v1.10 Keyboard [AONE Varmilo Keyboard] on usb-0000:00:14.0-3.4.1.1/input1

[ 5.012470] hid-generic 0003:04D9:A0D1.000E: hiddev2,hidraw9: USB HID v1.10 Device [AONE Varmilo Keyboard] on usb-0000:00:14.0-3.4.1.1/input2

[ 5.357565] Console: switching to colour frame buffer device 170x48

[ 5.377546] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

[ 5.444980] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.

[ 5.445077] device-mapper: uevent: version 1.0.3

[ 5.445221] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com

[ 5.557756] raid6: sse2x4 gen() 12542 MB/s

[ 5.625756] raid6: sse2x2 gen() 16523 MB/s

[ 5.693756] raid6: sse2x1 gen() 10553 MB/s

[ 5.694546] raid6: using algorithm sse2x2 gen() 16523 MB/s

[ 5.761756] raid6: .... xor() 9291 MB/s, rmw enabled

[ 5.762529] raid6: using ssse3x2 recovery algorithm

[ 5.765244] xor: automatically using best checksumming function avx

[ 5.766917] async_tx: api initialized (async)

[ 12.293369] Btrfs loaded, zoned=yes, fsverity=yes

[ 12.386016] PM: Image not found (code -22)

[ 12.531562] EXT4-fs (dm-1): mounted filesystem a2506fa6-fc3c-4dca-a86a-3cdefd9fdca5 ro with ordered data mode. Quota mode: none.

[ 12.624539] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.

[ 12.755366] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.

[ 12.776181] systemd[1]: Inserted module 'autofs4'

[ 12.797778] systemd[1]: systemd 254.5-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)

[ 12.797865] systemd[1]: Detected architecture x86-64.

[ 12.800545] systemd[1]: Hostname set to <TP-230t>.

[ 13.252799] systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly.

[ 13.325658] systemd[1]: Queued start job for default target graphical.target.

[ 13.360403] systemd[1]: Created slice system-getty.slice - Slice /system/getty.

[ 13.360981] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.

[ 13.361472] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice - Encrypted Volume Units Service Slice.

[ 13.361982] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.

[ 13.362380] systemd[1]: Created slice user.slice - User and Session Slice.

[ 13.362506] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.

[ 13.362757] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.

[ 13.362871] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.

[ 13.362941] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.

[ 13.362994] systemd[1]: Reached target remote-fs.target - Remote File Systems.

[ 13.364834] systemd[1]: Reached target slices.target - Slice Units.

[ 13.368357] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.

[ 13.370376] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.

[ 13.375559] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.

[ 13.380920] systemd[1]: Listening on syslog.socket - Syslog Socket.

[ 13.396551] systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.

[ 13.398281] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.

[ 13.401384] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.

[ 13.404634] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).

[ 13.407746] systemd[1]: Listening on systemd-journald.socket - Journal Socket.

[ 13.410979] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.

[ 13.413687] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.

[ 13.442100] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...

[ 13.444206] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...

[ 13.447284] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...

[ 13.450292] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...

[ 13.452476] systemd[1]: Finished blk-availability.service - Availability of block devices.

[ 13.457087] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...

[ 13.459163] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...

[ 13.462189] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...

[ 13.464916] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...

[ 13.467358] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...

[ 13.469852] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...

[ 13.472879] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...

[ 13.475454] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...

[ 13.478015] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...

[ 13.479262] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).

[ 13.483339] systemd[1]: Starting systemd-journald.service - Journal Service...

[ 13.486833] loop: module loaded

[ 13.486861] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...

[ 13.488922] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).

[ 13.492852] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...

[ 13.494748] fuse: init (API version 7.38)

[ 13.495573] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...

[ 13.501842] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.

[ 13.502814] systemd-journald[526]: Collecting audit messages is disabled.

[ 13.504627] EXT4-fs (dm-1): re-mounted a2506fa6-fc3c-4dca-a86a-3cdefd9fdca5 r/w. Quota mode: none.

[ 13.505655] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.

[ 13.507928] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.

[ 13.509730] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.

[ 13.512076] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.

[ 13.514083] lp: driver loaded but no devices found

[ 13.515554] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.

[ 13.518700] ppdev: user-space parallel port driver

[ 13.520599] systemd[1]: modprobe@configfs.service: Deactivated successfully.

[ 13.520850] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.

[ 13.524198] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.

[ 13.524437] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.

[ 13.529230] systemd[1]: modprobe@drm.service: Deactivated successfully.

[ 13.529474] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.

[ 13.533713] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.

[ 13.535316] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.

[ 13.538203] systemd[1]: modprobe@fuse.service: Deactivated successfully.

[ 13.539621] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.

[ 13.542468] systemd[1]: modprobe@loop.service: Deactivated successfully.

[ 13.543841] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.

[ 13.545468] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.

[ 13.549014] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.

[ 13.554085] systemd[1]: Activating swap swapfile.swap - /swapfile...

[ 13.556833] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...

[ 13.560501] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...

[ 13.562616] Adding 16777212k swap on /swapfile. Priority:-2 extents:1081 across:750534656k SSFS

[ 13.562931] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).

[ 13.563030] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).

[ 13.564855] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...

[ 13.570587] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.

[ 13.572448] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...

[ 13.576176] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...

[ 13.578478] systemd[1]: Activated swap swapfile.swap - /swapfile.

[ 13.581183] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.

[ 13.584303] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.

[ 13.587987] systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed.

[ 13.591686] systemd[1]: Finished lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.

[ 13.595178] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.

[ 13.599578] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully.

[ 13.602315] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met.

[ 13.603475] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...

[ 13.617701] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.

[ 13.620237] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files...

[ 13.621687] systemd[1]: Started systemd-journald.service - Journal Service.

[ 13.641059] systemd-journald[526]: Received client request to flush runtime journal.

[ 13.768811] sd 0:0:0:0: Attached scsi generic sg0 type 0

[ 13.775585] sd 1:0:0:0: Attached scsi generic sg1 type 0

[ 13.775636] sd 2:0:0:0: Attached scsi generic sg2 type 0

[ 13.775682] sd 6:0:0:0: Attached scsi generic sg3 type 0

[ 13.775725] sd 6:0:0:1: Attached scsi generic sg4 type 0

[ 13.776821] sd 6:0:0:2: Attached scsi generic sg5 type 0

[ 13.785115] sd 6:0:0:3: Attached scsi generic sg6 type 0

[ 13.787964] sd 6:0:0:4: Attached scsi generic sg7 type 0

[ 13.859604] ACPI: AC: AC Adapter [AC] (on-line)

[ 13.865917] Adding 1003516k swap on /dev/mapper/TP--230t--vg-swap_1. Priority:-3 extents:1 across:1003516k SSFS

[ 13.947164] input: PC Speaker as /devices/platform/pcspkr/input/input33

[ 13.955862] at24 0-0050: supply vcc not found, using dummy regulator

[ 13.957383] at24 0-0050: 256 byte spd EEPROM, read-only

[ 13.958994] at24 0-0051: supply vcc not found, using dummy regulator

[ 13.961805] iTCO_vendor_support: vendor-support=0

[ 13.969945] Non-volatile memory driver v1.3

[ 13.972510] at24 0-0051: 256 byte spd EEPROM, read-only

[ 14.025965] thinkpad_acpi: ThinkPad ACPI Extras v0.26

[ 14.026979] thinkpad_acpi: http://ibm-acpi.sf.net/

[ 14.027971] thinkpad_acpi: ThinkPad BIOS CBET4000 4.21, EC GCHT25WW-3.22

[ 14.028969] thinkpad_acpi: Lenovo ThinkPad X230 Tablet, model 20OJKGY

[ 14.031992] thinkpad_acpi: radio switch found; radios are enabled

[ 14.032120] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode

[ 14.032129] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver

[ 14.032130] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...

[ 14.034159] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked

[ 14.036488] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one

[ 14.036558] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)

[ 14.038428] thinkpad_acpi: battery 1 registered (start 0, stop 100, behaviours: 0x1)

[ 14.038438] ACPI: battery: new extension: ThinkPad Battery Extension

[ 14.038616] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input34

[ 14.058007] gsmi: no gsmi handler in firmware

[ 14.060427] iTCO_wdt iTCO_wdt.1.auto: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)

[ 14.060558] cfg80211: Loading compiled-in X.509 certificates for regulatory database

[ 14.060887] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'

[ 14.061126] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'

[ 14.061362] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'

[ 14.061547] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)

[ 14.064366] platform regulatory.0: firmware: direct-loading firmware regulatory.db

[ 14.064865] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s

[ 14.070771] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

[ 14.077379] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer

[ 14.078358] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules

[ 14.079318] RAPL PMU: hw unit of domain package 2^-16 Joules

[ 14.080273] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules

[ 14.129472] Intel(R) Wireless WiFi driver for Linux

[ 14.133064] iwlwifi 0000:02:00.0: Detected crf-id 0x400410, cnv-id 0x400410 wfpm id 0x80000000

[ 14.133084] iwlwifi 0000:02:00.0: PCI dev 2725/0024, rev=0x420, rfid=0x10d000

[ 14.142450] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-ty-a0-gf-a0-83.ucode

[ 14.145819] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker

[ 14.146837] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

[ 14.147854] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)

[ 14.148840] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0

[ 14.149813] snd_hda_codec_realtek hdaudioC0D0: inputs:

[ 14.150789] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18

[ 14.151674] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19

[ 14.151677] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12

[ 14.158274] iwlwifi 0000:02:00.0: api flags index 2 larger than supported by driver

[ 14.159232] iwlwifi 0000:02:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.41

[ 14.162971] iwlwifi 0000:02:00.0: firmware: failed to load iwl-debug-yoyo.bin (-2)

[ 14.162976] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware

[ 14.217069] iwlwifi 0000:02:00.0: firmware: failed to load iwl-debug-yoyo.bin (-2)

[ 14.218023] iwlwifi 0000:02:00.0: loaded firmware version 83.e8f84e98.0 ty-a0-gf-a0-83.ucode op_mode iwlmvm

[ 14.247880] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input35

[ 14.248976] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input36

[ 14.249048] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input37

[ 14.255724] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input38

[ 14.256865] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input39

[ 14.257996] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input40

[ 14.259120] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input41

[ 14.260233] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input42

[ 14.341490] intel_rapl_common: Found RAPL domain package

[ 14.342344] intel_rapl_common: Found RAPL domain core

[ 14.343129] intel_rapl_common: Found RAPL domain uncore

[ 14.375008] iwlwifi 0000:02:00.0: Detected Intel(R) Wi-Fi 6 AX210 160MHz, REV=0x420

[ 14.375107] thermal thermal_zone3: failed to read out thermal zone (-61)

[ 14.388219] iwlwifi 0000:02:00.0: WRT: Invalid buffer destination

[ 14.420658] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem

[ 14.422947] EXT4-fs (sda1): mounted filesystem 5b16bf32-bba4-4e5d-9a2b-6e9cd7fa067d r/w without journal. Quota mode: none.

[ 14.453341] EXT4-fs (sdb1): mounted filesystem 9887db5d-157c-40c4-9f3b-24ab2c23fe2f r/w with ordered data mode. Quota mode: none.

[ 14.544197] audit: type=1400 audit(1699314823.954:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1673 comm="apparmor_parser"

[ 14.544318] iwlwifi 0000:02:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x1f

[ 14.546067] audit: type=1400 audit(1699314823.954:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1676 comm="apparmor_parser"

[ 14.547195] iwlwifi 0000:02:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f

[ 14.549286] audit: type=1400 audit(1699314823.954:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1676 comm="apparmor_parser"

[ 14.550404] iwlwifi 0000:02:00.0: WFPM_AUTH_KEY_0: 0x90

[ 14.552535] audit: type=1400 audit(1699314823.958:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="mariadbd_akonadi" pid=1674 comm="apparmor_parser"

[ 14.553666] iwlwifi 0000:02:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0

[ 14.555953] audit: type=1400 audit(1699314823.958:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="mysqld_akonadi" pid=1675 comm="apparmor_parser"

[ 14.555957] audit: type=1400 audit(1699314823.958:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/akonadiserver" pid=1679 comm="apparmor_parser"

[ 14.555960] audit: type=1400 audit(1699314823.962:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=1681 comm="apparmor_parser"

[ 14.555963] audit: type=1400 audit(1699314823.962:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="postgresql_akonadi" pid=1677 comm="apparmor_parser"

[ 14.555965] audit: type=1400 audit(1699314823.962:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=1684 comm="apparmor_parser"

[ 14.555967] audit: type=1400 audit(1699314823.962:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="tcpdump" pid=1683 comm="apparmor_parser"

[ 14.571695] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-ty-a0-gf-a0.pnvm

[ 14.572939] iwlwifi 0000:02:00.0: loaded PNVM version e4a49534

[ 14.588676] iwlwifi 0000:02:00.0: Detected RF GF, rfid=0x10d000

[ 14.658301] iwlwifi 0000:02:00.0: base HW address: f4:7b:09:ca:52:29

[ 14.677012] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0

[ 14.688839] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input43

[ 15.049549] NET: Registered PF_QIPCRTR protocol family

[ 15.271587] iwlwifi 0000:02:00.0: WRT: Invalid buffer destination

[ 15.428046] iwlwifi 0000:02:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x1f

[ 15.428749] iwlwifi 0000:02:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f

[ 15.429431] iwlwifi 0000:02:00.0: WFPM_AUTH_KEY_0: 0x90

[ 15.430162] iwlwifi 0000:02:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0

[ 15.519308] iwlwifi 0000:02:00.0: Registered PHC clock: iwlwifi-PTP, with index: 1

[ 15.574596] iwlwifi 0000:02:00.0: WRT: Invalid buffer destination

[ 15.656255] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)

[ 15.686223] usbcore: registered new interface driver usbserial_generic

[ 15.687165] mc: Linux media interface: v0.10

[ 15.688262] usbserial: USB Serial support registered for generic

[ 15.693661] usbcore: registered new interface driver pl2303

[ 15.694710] usbserial: USB Serial support registered for pl2303

[ 15.695568] pl2303 3-3.3:1.0: pl2303 converter detected

[ 15.697647] usb 3-3.3: pl2303 converter now attached to ttyUSB0

[ 15.720843] videodev: Linux video capture interface: v2.00

[ 15.731296] iwlwifi 0000:02:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x1f

[ 15.732169] iwlwifi 0000:02:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f

[ 15.733035] iwlwifi 0000:02:00.0: WFPM_AUTH_KEY_0: 0x90

[ 15.733895] iwlwifi 0000:02:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0

[ 15.806419] usb 2-1.6: Found UVC 1.00 device Integrated Camera (04f2:b2ea)

[ 15.812818] usbcore: registered new interface driver uvcvideo

[ 15.817963] Bluetooth: Core ver 2.22

[ 15.818687] NET: Registered PF_BLUETOOTH protocol family

[ 15.819498] Bluetooth: HCI device and connection manager initialized

[ 15.820321] Bluetooth: HCI socket layer initialized

[ 15.821146] Bluetooth: L2CAP socket layer initialized

[ 15.821835] Bluetooth: SCO socket layer initialized

[ 15.883861] process '/usr/bin/anydesk' started with executable stack

[ 15.906327] usbcore: registered new interface driver btusb

[ 15.908748] Bluetooth: hci0: Firmware timestamp 2023.13 buildtype 1 build 62562

[ 15.918440] bluetooth hci0: firmware: direct-loading firmware intel/ibt-0041-0041.sfi

[ 15.922969] Bluetooth: hci0: Found device firmware: intel/ibt-0041-0041.sfi

[ 15.923779] Bluetooth: hci0: Boot Address: 0x100800

[ 15.924494] Bluetooth: hci0: Firmware Version: 98-13.23

[ 15.925228] Bluetooth: hci0: Firmware already loaded

[ 15.996577] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[ 15.997386] Bluetooth: BNEP filters: protocol multicast

[ 15.998094] Bluetooth: BNEP socket layer initialized

[ 16.001124] Bluetooth: MGMT ver 1.22

[ 16.007649] NET: Registered PF_ALG protocol family

[ 16.069793] Bluetooth: hci0: Bad flag given (0x1) vs supported (0x0)

[ 16.686754] pipewire[2880]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set

[ 17.215246] Bluetooth: RFCOMM TTY layer initialized

[ 17.215275] Bluetooth: RFCOMM socket layer initialized

[ 17.215283] Bluetooth: RFCOMM ver 1.11

[ 18.467768] e1000e 0000:00:19.0 eno0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None

[ 18.630011] vboxdrv: loading out-of-tree module taints kernel.

[ 18.630019] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel

[ 18.654467] vboxdrv: Found 8 processor cores/threads

[ 18.674071] vboxdrv: TSC mode is Invariant, tentative frequency 2294788019 Hz

[ 18.674078] vboxdrv: Successfully loaded version 7.0.12_Debian r159484 (interface 0x00330004)

[ 18.691626] VBoxNetFlt: Successfully started.

[ 18.703947] VBoxNetAdp: Successfully started.

[ 19.171483] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.

[ 19.173496] Bridge firewalling registered

[ 19.259270] Initializing XFRM netlink socket

[ 19.863910] rfkill: input handler disabled

[ 30.099636] logitech-hidpp-device 0003:046D:406F.000B: HID++ 4.5 device connected.

[ 35.228100] rfkill: input handler enabled

[ 38.530130] warning: `kded5' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211

[ 40.494559] wlp2s0: authenticate with 44:4e:6d:04:50:0e

[ 40.494591] wlp2s0: 80 MHz not supported, disabling VHT

[ 40.499453] wlp2s0: send auth to 44:4e:6d:04:50:0e (try 1/3)

[ 40.627809] wlp2s0: authenticate with 44:4e:6d:04:50:0e

[ 40.627823] wlp2s0: send auth to 44:4e:6d:04:50:0e (try 1/3)

[ 40.655127] wlp2s0: authenticated

[ 40.657776] wlp2s0: associate with 44:4e:6d:04:50:0e (try 1/3)

[ 40.665592] wlp2s0: RX AssocResp from 44:4e:6d:04:50:0e (capab=0x1431 status=0 aid=3)

[ 40.680582] wlp2s0: associated

[ 40.712533] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 44:4e:6d:04:50:0e

[ 44.840049] systemd-journald[526]: Time jumped backwards, rotating.

[ 53.277531] e1000e 0000:00:19.0 eno0: NIC Link is Down

[ 53.278291] wlp2s0: deauthenticating from 44:4e:6d:04:50:0e by local choice (Reason: 3=DEAUTH_LEAVING)

[ 53.712584] PM: suspend entry (deep)

[ 53.716209] Filesystems sync: 0.003 seconds

[ 53.716311] (NULL device *): firmware: direct-loading firmware iwlwifi-ty-a0-gf-a0.pnvm

[ 53.716370] (NULL device *): firmware: direct-loading firmware regulatory.db

[ 53.716401] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s

[ 53.716582] (NULL device *): firmware: direct-loading firmware intel/ibt-0041-0041.sfi

[ 53.716707] (NULL device *): firmware: direct-loading firmware iwlwifi-ty-a0-gf-a0-83.ucode

[ 53.725120] Freezing user space processes

[ 53.727056] Freezing user space processes completed (elapsed 0.001 seconds)

[ 53.727061] OOM killer disabled.

[ 53.727062] Freezing remaining freezable tasks

[ 53.728180] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)

[ 53.728196] printk: Suspending console(s) (use no_console_suspend to debug)

[ 53.745919] sd 2:0:0:0: [sdc] Synchronizing SCSI cache

[ 53.910565] ata3.00: Entering standby power mode

[ 53.929910] sd 0:0:0:0: [sda] Synchronizing SCSI cache

[ 53.929930] sd 1:0:0:0: [sdb] Synchronizing SCSI cache

[ 53.930386] ata2.00: Entering standby power mode

[ 53.931943] ata1.00: Entering standby power mode

[ 54.128542] e1000e: EEE TX LPI TIMER: 00000011

[ 54.901540] ACPI: EC: interrupt blocked

[ 54.926622] ACPI: PM: Preparing to enter system sleep state S3

[ 54.931282] ACPI: EC: event blocked

[ 54.931283] ACPI: EC: EC stopped

[ 54.931284] ACPI: PM: Saving platform NVS memory

[ 54.931298] Disabling non-boot CPUs ...

[ 54.932777] smpboot: CPU 1 is now offline

[ 54.934835] smpboot: CPU 2 is now offline

[ 54.936925] smpboot: CPU 3 is now offline

[ 54.938877] smpboot: CPU 4 is now offline

[ 54.940873] smpboot: CPU 5 is now offline

[ 54.942767] smpboot: CPU 6 is now offline

[ 54.944814] smpboot: CPU 7 is now offline

[ 54.945833] ACPI: PM: Low-level resume complete

[ 54.945856] ACPI: EC: EC started

[ 54.945857] ACPI: PM: Restoring platform NVS memory

[ 54.946231] Enabling non-boot CPUs ...

[ 54.946267] smpboot: Booting Node 0 Processor 1 APIC 0x2

[ 54.949100] CPU1 is up

[ 54.949126] smpboot: Booting Node 0 Processor 2 APIC 0x4

[ 54.952059] CPU2 is up

[ 54.952084] smpboot: Booting Node 0 Processor 3 APIC 0x6

[ 54.954937] CPU3 is up

[ 54.954962] smpboot: Booting Node 0 Processor 4 APIC 0x1

[ 54.958018] CPU4 is up

[ 54.958042] smpboot: Booting Node 0 Processor 5 APIC 0x3

[ 54.961079] CPU5 is up

[ 54.961102] smpboot: Booting Node 0 Processor 6 APIC 0x5

[ 54.964038] CPU6 is up

[ 54.964061] smpboot: Booting Node 0 Processor 7 APIC 0x7

[ 54.967017] CPU7 is up

[ 54.970297] ACPI: PM: Waking up from system sleep state S3

[ 54.973615] ACPI: EC: interrupt unblocked

[ 54.973904] pcieport 0000:00:1c.1: Enabling MPC IRBNCE

[ 54.973908] pcieport 0000:00:1c.0: Enabling MPC IRBNCE

[ 54.973910] pcieport 0000:00:1c.1: Intel PCH root port ACS workaround enabled

[ 54.973914] pcieport 0000:00:1c.0: Intel PCH root port ACS workaround enabled

[ 54.974228] pcieport 0000:00:1c.2: Enabling MPC IRBNCE

[ 54.974245] pcieport 0000:00:1c.2: Intel PCH root port ACS workaround enabled

[ 54.974435] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.

[ 54.975694] ACPI: EC: event unblocked

[ 54.993793] iwlwifi 0000:02:00.0: WRT: Invalid buffer destination

[ 55.162631] iwlwifi 0000:02:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20

[ 55.162653] iwlwifi 0000:02:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f

[ 55.162688] iwlwifi 0000:02:00.0: WFPM_AUTH_KEY_0: 0x90

[ 55.162704] iwlwifi 0000:02:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0

[ 55.242899] usb 3-1: reset high-speed USB device number 2 using xhci_hcd

[ 55.250589] usb 2-1.4: reset full-speed USB device number 4 using ehci-pci

[ 55.258592] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci

[ 55.289347] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 55.289358] ata3.00: Entering active power mode

[ 55.289373] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[ 55.289379] ata1.00: Entering active power mode

[ 55.290285] ata3.00: supports DRM functions and may not be fully accessible

[ 55.291604] ata3.00: supports DRM functions and may not be fully accessible

[ 55.292389] ata3.00: configured for UDMA/133

[ 55.297517] ata1.00: supports DRM functions and may not be fully accessible

[ 55.353779] ata1.00: supports DRM functions and may not be fully accessible

[ 55.386000] ata1.00: configured for UDMA/133

[ 55.438589] usb 2-1.6: reset high-speed USB device number 6 using ehci-pci

[ 55.522871] usb 3-3: reset high-speed USB device number 3 using xhci_hcd

[ 55.634643] usb 2-1.5: reset full-speed USB device number 5 using ehci-pci

[ 55.742274] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]

[ 55.750886] usb 3-1.2: reset high-speed USB device number 4 using xhci_hcd

[ 55.780726] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]

[ 55.930930] usb 3-1.3: reset full-speed USB device number 5 using xhci_hcd

[ 56.114967] usb 3-3.4: reset high-speed USB device number 7 using xhci_hcd

[ 56.294940] usb 3-3.3: reset full-speed USB device number 6 using xhci_hcd

[ 56.395769] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0

[ 56.395800] pl2303 3-3.3:1.0: device disconnected

[ 56.630928] usb 3-3.4.1: reset full-speed USB device number 8 using xhci_hcd

[ 57.050979] usb 3-3.4.2: reset full-speed USB device number 9 using xhci_hcd

[ 57.350951] usb 3-3.4.1.1: reset full-speed USB device number 10 using xhci_hcd

[ 57.934593] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[ 57.934603] ata2.00: Entering active power mode

[ 58.035056] ata2.00: configured for UDMA/133

[ 58.149804] pl2303 3-3.3:1.0: pl2303 converter detected

[ 58.150185] OOM killer enabled.

[ 58.150188] Restarting tasks ...

[ 58.154158] usb 3-3.3: pl2303 converter now attached to ttyUSB0

[ 58.156098] Bluetooth: hci0: Device revision is 0

[ 58.156107] Bluetooth: hci0: Secure boot is enabled

[ 58.156110] Bluetooth: hci0: OTP lock is enabled

[ 58.156112] Bluetooth: hci0: API lock is enabled

[ 58.156114] Bluetooth: hci0: Debug lock is disabled

[ 58.156116] Bluetooth: hci0: Minimum firmware build 1 week 10 2014

[ 58.156119] Bluetooth: hci0: Bootloader timestamp 2019.40 buildtype 1 build 38

[ 58.159227] done.

[ 58.159238] random: crng reseeded on system resumption

[ 58.159651] usb 4-1.2: USB disconnect, device number 3

[ 58.159658] usb 4-1.2.4: USB disconnect, device number 4

[ 58.162833] Bluetooth: hci0: Found device firmware: intel/ibt-0041-0041.sfi

[ 58.162979] Bluetooth: hci0: Boot Address: 0x100800

[ 58.162983] Bluetooth: hci0: Firmware Version: 98-13.23

[ 58.175084] video LNXVIDEO:00: Restoring backlight state

[ 58.570648] PM: suspend exit

[ 59.674063] Bluetooth: hci0: Waiting for firmware download to complete

[ 59.675129] Bluetooth: hci0: Firmware loaded in 1476842 usecs

[ 59.675208] Bluetooth: hci0: Waiting for device to boot

[ 59.701187] Bluetooth: hci0: Device booted in 25426 usecs

[ 59.703472] bluetooth hci0: firmware: direct-loading firmware intel/ibt-0041-0041.ddc

[ 59.703522] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0041-0041.ddc

[ 59.705252] Bluetooth: hci0: Applying Intel DDC parameters completed

[ 59.706133] Bluetooth: hci0: No support for BT device in ACPI firmware

[ 59.708199] Bluetooth: hci0: Firmware timestamp 2023.13 buildtype 1 build 62562

[ 59.784638] Bluetooth: MGMT ver 1.22

[ 59.857480] Bluetooth: hci0: Bad flag given (0x1) vs supported (0x0)

[ 61.592419] wlp2s0: authenticate with 44:4e:6d:04:50:0f

[ 61.599943] wlp2s0: send auth to 44:4e:6d:04:50:0f (try 1/3)

[ 61.743529] wlp2s0: authenticate with 44:4e:6d:04:50:0f

[ 61.743542] wlp2s0: send auth to 44:4e:6d:04:50:0f (try 1/3)

[ 61.820059] wlp2s0: authenticated

[ 61.822549] wlp2s0: associate with 44:4e:6d:04:50:0f (try 1/3)

[ 61.828598] wlp2s0: RX AssocResp from 44:4e:6d:04:50:0f (capab=0x1511 status=0 aid=1)

[ 61.841401] wlp2s0: associated

[ 61.891331] wlp2s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 44:4e:6d:04:50:0f

[ 62.244647] e1000e 0000:00:19.0 eno0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None

[ 66.291262] wlp2s0: deauthenticating from 44:4e:6d:04:50:0f by local choice (Reason: 3=DEAUTH_LEAVING)