coreboot

[ 0.000000] Linux version 5.18.0-1-amd64 (debian-kernel@lists.debian.org) (gcc-11 (Debian 11.3.0-3) 11.3.0, GNU ld (GNU Binutils for Debian) 2.38) #1 SMP PREEMPT_DYNAMIC Debian 5.18.2-1 (2022-06-06)

[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.18.0-1-amd64 root=/dev/mapper/TP--230t--vg-root ro iomem=relaxed

[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'

[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'

[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'

[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256

[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.

[ 0.000000] signal: max sigframe size: 1776

[ 0.000000] BIOS-provided physical RAM map:

[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable

[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved

[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007edb7fff] usable

[ 0.000000] BIOS-e820: [mem 0x000000007edb8000-0x000000007ef1ffff] reserved

[ 0.000000] BIOS-e820: [mem 0x000000007ef20000-0x000000007ff23fff] usable

[ 0.000000] BIOS-e820: [mem 0x000000007ff24000-0x000000008e9fffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved

[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004715fffff] usable

[ 0.000000] NX (Execute Disable) protection: active

[ 0.000000] SMBIOS 3.0.0 present.

[ 0.000000] DMI: LENOVO 20OJKGY/20OJKGY, BIOS CBET4000 CoreBoot 4.15 X230 Tablet 11/09/2021

[ 0.000000] tsc: Fast TSC calibration using PIT

[ 0.000000] tsc: Detected 2294.736 MHz processor

[ 0.001102] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[ 0.001106] e820: remove [mem 0x000a0000-0x000fffff] usable

[ 0.001112] last_pfn = 0x471600 max_arch_pfn = 0x400000000

[ 0.001210] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT

[ 0.002158] last_pfn = 0x7ff24 max_arch_pfn = 0x400000000

[ 0.014739] RAMDISK: [mem 0x2ecf7000-0x33672fff]

[ 0.014745] ACPI: Early table checksum verification disabled

[ 0.014748] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4)

[ 0.014754] ACPI: XSDT 0x000000007FF490E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20210331)

[ 0.014761] ACPI: FACP 0x000000007FF4CAF0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20210331)

[ 0.014768] ACPI: DSDT 0x000000007FF49280 00386D (v02 COREv4 COREBOOT 20110725 INTL 20210331)

[ 0.014772] ACPI: FACS 0x000000007FF49240 000040

[ 0.014776] ACPI: FACS 0x000000007FF49240 000040

[ 0.014779] ACPI: SSDT 0x000000007FF4CC10 002967 (v02 COREv4 COREBOOT 0000002A CORE 20210331)

[ 0.014784] ACPI: MCFG 0x000000007FF4F580 00003C (v01 COREv4 COREBOOT 00000000 CORE 20210331)

[ 0.014788] ACPI: TCPA 0x000000007FF4F5C0 000032 (v02 COREv4 COREBOOT 00000000 CORE 20210331)

[ 0.014792] ACPI: APIC 0x000000007FF4F600 00008C (v03 COREv4 COREBOOT 00000000 CORE 20210331)

[ 0.014796] ACPI: DMAR 0x000000007FF4F690 0000C0 (v01 COREv4 COREBOOT 00000000 CORE 20210331)

[ 0.014800] ACPI: HPET 0x000000007FF4F750 000038 (v01 COREv4 COREBOOT 00000000 CORE 20210331)

[ 0.014804] ACPI: Reserving FACP table memory at [mem 0x7ff4caf0-0x7ff4cc03]

[ 0.014806] ACPI: Reserving DSDT table memory at [mem 0x7ff49280-0x7ff4caec]

[ 0.014808] ACPI: Reserving FACS table memory at [mem 0x7ff49240-0x7ff4927f]

[ 0.014810] ACPI: Reserving FACS table memory at [mem 0x7ff49240-0x7ff4927f]

[ 0.014811] ACPI: Reserving SSDT table memory at [mem 0x7ff4cc10-0x7ff4f576]

[ 0.014813] ACPI: Reserving MCFG table memory at [mem 0x7ff4f580-0x7ff4f5bb]

[ 0.014815] ACPI: Reserving TCPA table memory at [mem 0x7ff4f5c0-0x7ff4f5f1]

[ 0.014816] ACPI: Reserving APIC table memory at [mem 0x7ff4f600-0x7ff4f68b]

[ 0.014818] ACPI: Reserving DMAR table memory at [mem 0x7ff4f690-0x7ff4f74f]

[ 0.014819] ACPI: Reserving HPET table memory at [mem 0x7ff4f750-0x7ff4f787]

[ 0.014883] No NUMA configuration found

[ 0.014884] Faking a node at [mem 0x0000000000000000-0x00000004715fffff]

[ 0.014897] NODE_DATA(0) allocated [mem 0x4715c8000-0x4715f2fff]

[ 0.015404] Zone ranges:

[ 0.015405] DMA [mem 0x0000000000001000-0x0000000000ffffff]

[ 0.015408] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]

[ 0.015410] Normal [mem 0x0000000100000000-0x00000004715fffff]

[ 0.015413] Device empty

[ 0.015414] Movable zone start for each node

[ 0.015418] Early memory node ranges

[ 0.015419] node 0: [mem 0x0000000000001000-0x000000000009efff]

[ 0.015422] node 0: [mem 0x0000000000100000-0x000000007edb7fff]

[ 0.015423] node 0: [mem 0x000000007ef20000-0x000000007ff23fff]

[ 0.015425] node 0: [mem 0x0000000100000000-0x00000004715fffff]

[ 0.015429] Initmem setup node 0 [mem 0x0000000000001000-0x00000004715fffff]

[ 0.015435] On node 0, zone DMA: 1 pages in unavailable ranges

[ 0.015482] On node 0, zone DMA: 97 pages in unavailable ranges

[ 0.021429] On node 0, zone DMA32: 360 pages in unavailable ranges

[ 0.021831] On node 0, zone Normal: 220 pages in unavailable ranges

[ 0.022140] On node 0, zone Normal: 27136 pages in unavailable ranges

[ 0.022149] Reserving Intel graphics memory at [mem 0x80a00000-0x8e9fffff]

[ 0.022343] ACPI: PM-Timer IO Port: 0x508

[ 0.022362] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23

[ 0.022366] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[ 0.022369] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[ 0.022374] ACPI: Using ACPI (MADT) for SMP configuration information

[ 0.022376] ACPI: HPET id: 0x8086a701 base: 0xfed00000

[ 0.022382] TSC deadline timer available

[ 0.022383] smpboot: Allowing 8 CPUs, 0 hotplug CPUs

[ 0.022398] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]

[ 0.022401] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]

[ 0.022403] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]

[ 0.022404] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]

[ 0.022407] PM: hibernation: Registered nosave memory: [mem 0x7edb8000-0x7ef1ffff]

[ 0.022409] PM: hibernation: Registered nosave memory: [mem 0x7ff24000-0x8e9fffff]

[ 0.022411] PM: hibernation: Registered nosave memory: [mem 0x8ea00000-0xefffffff]

[ 0.022412] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]

[ 0.022413] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]

[ 0.022415] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]

[ 0.022416] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]

[ 0.022418] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfed91fff]

[ 0.022419] PM: hibernation: Registered nosave memory: [mem 0xfed92000-0xffffffff]

[ 0.022421] [mem 0x8ea00000-0xefffffff] available for PCI devices

[ 0.022424] Booting paravirtualized kernel on bare hardware

[ 0.022427] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns

[ 0.027357] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1

[ 0.027599] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144

[ 0.027607] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152

[ 0.027610] pcpu-alloc: [0] 0 1 2 3 4 5 6 7

[ 0.027642] Fallback order for Node 0: 0

[ 0.027646] Built 1 zonelists, mobility grouping on. Total pages: 4068973

[ 0.027649] Policy zone: Normal

[ 0.027650] Kernel command line: BOOT_IMAGE=/vmlinuz-5.18.0-1-amd64 root=/dev/mapper/TP--230t--vg-root ro iomem=relaxed

[ 0.027693] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-5.18.0-1-amd64", will be passed to user space.

[ 0.028656] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)

[ 0.029132] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)

[ 0.029271] mem auto-init: stack:off, heap alloc:on, heap free:off

[ 0.055130] Memory: 2083836K/16534888K available (12294K kernel code, 2773K rwdata, 8560K rodata, 2500K init, 5156K bss, 468072K reserved, 0K cma-reserved)

[ 0.055508] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1

[ 0.055529] Kernel/User page tables isolation: enabled

[ 0.055548] ftrace: allocating 38624 entries in 151 pages

[ 0.063446] ftrace: allocated 151 pages with 5 groups

[ 0.064120] Dynamic Preempt: voluntary

[ 0.064172] rcu: Preemptible hierarchical RCU implementation.

[ 0.064174] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.

[ 0.064176] Trampoline variant of Tasks RCU enabled.

[ 0.064177] Rude variant of Tasks RCU enabled.

[ 0.064178] Tracing variant of Tasks RCU enabled.

[ 0.064179] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.

[ 0.064181] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8

[ 0.069271] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16

[ 0.069499] random: crng init done

[ 0.069526] spurious 8259A interrupt: IRQ7.

[ 0.071163] Console: colour VGA+ 80x25

[ 0.078849] printk: console [tty0] enabled

[ 0.078925] ACPI: Core revision 20211217

[ 0.079064] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns

[ 0.079158] APIC: Switch to symmetric I/O mode setup

[ 0.079218] DMAR: Host address width 36

[ 0.079276] DMAR: DRHD base: 0x000000fed90000 flags: 0x0

[ 0.079341] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a

[ 0.079417] DMAR: DRHD base: 0x000000fed91000 flags: 0x1

[ 0.079482] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a

[ 0.079558] DMAR: RMRR base: 0x00000080800000 end: 0x0000008e9fffff

[ 0.079622] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1

[ 0.079685] DMAR-IR: HPET id 0 under DRHD base 0xfed91000

[ 0.079745] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.

[ 0.080369] DMAR-IR: Enabled IRQ remapping in x2apic mode

[ 0.080429] x2apic enabled

[ 0.080492] Switched APIC routing to cluster x2apic.

[ 0.080999] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 0.099159] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2113c85817b, max_idle_ns: 440795232640 ns

[ 0.099241] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.47 BogoMIPS (lpj=9178944)

[ 0.099323] pid_max: default: 32768 minimum: 301

[ 0.099414] LSM: Security Framework initializing

[ 0.099485] Yama: disabled by default; enable with sysctl kernel.yama.*

[ 0.099574] AppArmor: AppArmor initialized

[ 0.099632] TOMOYO Linux initialized

[ 0.099740] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)

[ 0.099845] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)

[ 0.100176] CPU0: Thermal monitoring enabled (TM1)

[ 0.100261] process: using mwait in idle threads

[ 0.100322] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8

[ 0.100385] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0

[ 0.100449] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization

[ 0.100525] Spectre V2 : Mitigation: Retpolines

[ 0.100585] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch

[ 0.100658] Spectre V2 : Enabling Restricted Speculation for firmware calls

[ 0.100722] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier

[ 0.101223] Spectre V2 : User space: Mitigation: STIBP via prctl

[ 0.101285] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl

[ 0.101362] SRBDS: Vulnerable: No microcode

[ 0.101421] MDS: Mitigation: Clear CPU buffers

[ 0.104232] Freeing SMP alternatives memory: 32K

[ 0.104501] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1380

[ 0.104585] smpboot: CPU0: Intel(R) Core(TM) i7-3615QE CPU @ 2.30GHz (family: 0x6, model: 0x3a, stepping: 0x9)

[ 0.104834] cblist_init_generic: Setting adjustable number of callback queues.

[ 0.104912] cblist_init_generic: Setting shift to 3 and lim to 1.

[ 0.104996] cblist_init_generic: Setting shift to 3 and lim to 1.

[ 0.105076] cblist_init_generic: Setting shift to 3 and lim to 1.

[ 0.105157] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.

[ 0.105252] ... version: 3

[ 0.105309] ... bit width: 48

[ 0.105366] ... generic registers: 4

[ 0.105424] ... value mask: 0000ffffffffffff

[ 0.105483] ... max period: 00007fffffffffff

[ 0.105544] ... fixed-purpose events: 3

[ 0.105601] ... event mask: 000000070000000f

[ 0.105818] rcu: Hierarchical SRCU implementation.

[ 0.106820] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.

[ 0.106986] smp: Bringing up secondary CPUs ...

[ 0.107163] x86: Booting SMP configuration:

[ 0.107224] .... node #0, CPUs: #1

[ 0.109856] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.

[ 0.109856] #2 #3 #4 #5 #6 #7

[ 0.130230] smp: Brought up 1 node, 8 CPUs

[ 0.130230] smpboot: Max logical packages: 1

[ 0.130230] smpboot: Total of 8 processors activated (36715.77 BogoMIPS)

[ 0.153795] node 0 deferred pages initialised in 20ms

[ 0.153866] devtmpfs: initialized

[ 0.153866] x86/mm: Memory block size: 128MB

[ 0.156236] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns

[ 0.156236] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)

[ 0.156236] pinctrl core: initialized pinctrl subsystem

[ 0.156236] NET: Registered PF_NETLINK/PF_ROUTE protocol family

[ 0.156361] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations

[ 0.156574] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations

[ 0.156808] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations

[ 0.156899] audit: initializing netlink subsys (disabled)

[ 0.156976] audit: type=2000 audit(1655592873.076:1): state=initialized audit_enabled=0 res=1

[ 0.156976] thermal_sys: Registered thermal governor 'fair_share'

[ 0.156976] thermal_sys: Registered thermal governor 'bang_bang'

[ 0.156976] thermal_sys: Registered thermal governor 'step_wise'

[ 0.156976] thermal_sys: Registered thermal governor 'user_space'

[ 0.156976] thermal_sys: Registered thermal governor 'power_allocator'

[ 0.156976] cpuidle: using governor ladder

[ 0.156976] cpuidle: using governor menu

[ 0.156976] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[ 0.156976] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)

[ 0.156976] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820

[ 0.156976] PCI: Using configuration type 1 for base access

[ 0.156976] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on

[ 0.160217] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.

[ 0.160302] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages

[ 0.160302] ACPI: Added _OSI(Module Device)

[ 0.160302] ACPI: Added _OSI(Processor Device)

[ 0.160302] ACPI: Added _OSI(3.0 _SCP Extensions)

[ 0.160302] ACPI: Added _OSI(Processor Aggregator Device)

[ 0.160302] ACPI: Added _OSI(Linux-Dell-Video)

[ 0.160302] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)

[ 0.160302] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)

[ 0.160358] ACPI: 2 ACPI AML tables successfully acquired and loaded

[ 0.163504] ACPI: EC: EC started

[ 0.163563] ACPI: EC: interrupt blocked

[ 0.164127] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62

[ 0.164188] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions

[ 0.164262] ACPI: Interpreter enabled

[ 0.164339] ACPI: PM: (supports S0 S3 S4 S5)

[ 0.164397] ACPI: Using IOAPIC for interrupt routing

[ 0.164475] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[ 0.164707] ACPI: Enabled 1 GPEs in block 00 to 3F

[ 0.171500] ACPI: PM: Power Resource [FPWR]

[ 0.171860] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[ 0.171929] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]

[ 0.172041] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]

[ 0.172126] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge

[ 0.172261] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])

[ 0.172347] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d05ff])

[ 0.172608] PCI host bridge to bus 0000:00

[ 0.172669] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]

[ 0.172734] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]

[ 0.172796] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000cbfff window]

[ 0.172871] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000fffff window]

[ 0.172946] pci_bus 0000:00: root bus resource [mem 0x8ea00000-0xefffffff window]

[ 0.173020] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]

[ 0.173095] pci_bus 0000:00: root bus resource [bus 00-ff]

[ 0.173169] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000

[ 0.173325] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000

[ 0.173398] pci 0000:00:02.0: reg 0x10: [mem 0x8ec00000-0x8effffff 64bit]

[ 0.173467] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]

[ 0.173546] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f]

[ 0.173621] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]

[ 0.173772] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000

[ 0.173841] pci 0000:00:04.0: reg 0x10: [mem 0x8f830000-0x8f837fff 64bit]

[ 0.173992] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330

[ 0.174073] pci 0000:00:14.0: reg 0x10: [mem 0x8f820000-0x8f82ffff 64bit]

[ 0.174209] pci 0000:00:14.0: PME# supported from D3hot D3cold

[ 0.174358] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000

[ 0.174433] pci 0000:00:19.0: reg 0x10: [mem 0x8f800000-0x8f81ffff]

[ 0.174504] pci 0000:00:19.0: reg 0x14: [mem 0x8f83c000-0x8f83cfff]

[ 0.174575] pci 0000:00:19.0: reg 0x18: [io 0x1040-0x105f]

[ 0.174696] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold

[ 0.174820] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320

[ 0.174897] pci 0000:00:1a.0: reg 0x10: [mem 0x8f83f000-0x8f83f3ff]

[ 0.175045] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold

[ 0.175191] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300

[ 0.175259] pci 0000:00:1b.0: reg 0x10: [mem 0x8f838000-0x8f83bfff 64bit]

[ 0.175402] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

[ 0.175563] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400

[ 0.175774] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[ 0.175871] pci 0000:00:1c.0: Enabling MPC IRBNCE

[ 0.175933] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled

[ 0.176086] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400

[ 0.176295] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold

[ 0.176393] pci 0000:00:1c.1: Enabling MPC IRBNCE

[ 0.176454] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled

[ 0.176609] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400

[ 0.176821] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold

[ 0.176916] pci 0000:00:1c.2: Enabling MPC IRBNCE

[ 0.176978] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled

[ 0.177132] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320

[ 0.177209] pci 0000:00:1d.0: reg 0x10: [mem 0x8f840000-0x8f8403ff]

[ 0.177359] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold

[ 0.177507] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100

[ 0.177754] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601

[ 0.177827] pci 0000:00:1f.2: reg 0x10: [io 0x1080-0x1087]

[ 0.177897] pci 0000:00:1f.2: reg 0x14: [io 0x1090-0x1093]

[ 0.177965] pci 0000:00:1f.2: reg 0x18: [io 0x1088-0x108f]

[ 0.178032] pci 0000:00:1f.2: reg 0x1c: [io 0x1094-0x1097]

[ 0.178098] pci 0000:00:1f.2: reg 0x20: [io 0x1060-0x107f]

[ 0.178166] pci 0000:00:1f.2: reg 0x24: [mem 0x8f83e000-0x8f83e7ff]

[ 0.178269] pci 0000:00:1f.2: PME# supported from D3hot

[ 0.178402] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500

[ 0.178481] pci 0000:00:1f.3: reg 0x10: [mem 0x8f841000-0x8f8410ff 64bit]

[ 0.178565] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]

[ 0.178712] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000

[ 0.178794] pci 0000:00:1f.6: reg 0x10: [mem 0x8f83d000-0x8f83dfff 64bit]

[ 0.179102] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.

[ 0.179173] pci 0000:01:00.0: [1180:e822] type 00 class 0x080501

[ 0.179295] pci 0000:01:00.0: reg 0x10: [mem 0x8ea00000-0x8ea000ff]

[ 0.179713] pci 0000:01:00.0: supports D1 D2

[ 0.179772] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.180062] pci 0000:00:1c.0: PCI bridge to [bus 01]

[ 0.180131] pci 0000:00:1c.0: bridge window [mem 0x8ea00000-0x8eafffff]

[ 0.180383] pci 0000:02:00.0: [8086:2723] type 00 class 0x028000

[ 0.180540] pci 0000:02:00.0: reg 0x10: [mem 0x8eb00000-0x8eb03fff 64bit]

[ 0.181127] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold

[ 0.181595] pci 0000:00:1c.1: PCI bridge to [bus 02]

[ 0.181665] pci 0000:00:1c.1: bridge window [mem 0x8eb00000-0x8ebfffff]

[ 0.181815] pci 0000:00:1c.2: PCI bridge to [bus 03-0b]

[ 0.181880] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]

[ 0.181945] pci 0000:00:1c.2: bridge window [mem 0x8f000000-0x8f7fffff]

[ 0.182015] pci 0000:00:1c.2: bridge window [mem 0x471600000-0x4815fffff 64bit pref]

[ 0.183434] ACPI: PCI: Interrupt link LNKA configured for IRQ 11

[ 0.183543] ACPI: PCI: Interrupt link LNKB configured for IRQ 11

[ 0.183648] ACPI: PCI: Interrupt link LNKC configured for IRQ 11

[ 0.183751] ACPI: PCI: Interrupt link LNKD configured for IRQ 11

[ 0.183857] ACPI: PCI: Interrupt link LNKE configured for IRQ 11

[ 0.183960] ACPI: PCI: Interrupt link LNKF configured for IRQ 11

[ 0.184064] ACPI: PCI: Interrupt link LNKG configured for IRQ 11

[ 0.184165] ACPI: PCI: Interrupt link LNKH configured for IRQ 11

[ 0.185212] ACPI: EC: interrupt unblocked

[ 0.185271] ACPI: EC: event unblocked

[ 0.185331] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62

[ 0.185393] ACPI: EC: GPE=0x11

[ 0.185450] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC initialization complete

[ 0.185515] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events

[ 0.185662] iommu: Default domain type: Translated

[ 0.185662] iommu: DMA domain TLB invalidation policy: lazy mode

[ 0.185662] EDAC MC: Ver: 3.0.0

[ 0.185662] NetLabel: Initializing

[ 0.185662] NetLabel: domain hash size = 128

[ 0.185662] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO

[ 0.185662] NetLabel: unlabeled traffic allowed by default

[ 0.185662] PCI: Using ACPI for IRQ routing

[ 0.188379] PCI: pci_cache_line_size set to 64 bytes

[ 0.188383] pci 0000:00:1c.2: can't claim BAR 15 [mem 0x471600000-0x4815fffff 64bit pref]: no compatible bridge window

[ 0.188538] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]

[ 0.188541] e820: reserve RAM buffer [mem 0x7edb8000-0x7fffffff]

[ 0.188542] e820: reserve RAM buffer [mem 0x7ff24000-0x7fffffff]

[ 0.188544] e820: reserve RAM buffer [mem 0x471600000-0x473ffffff]

[ 0.188563] pci 0000:00:02.0: vgaarb: setting as boot VGA device

[ 0.188563] pci 0000:00:02.0: vgaarb: bridge control possible

[ 0.188563] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none

[ 0.188563] vgaarb: loaded

[ 0.188563] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0

[ 0.188604] hpet0: 8 comparators, 64-bit 14.318180 MHz counter

[ 0.191292] clocksource: Switched to clocksource tsc-early

[ 0.199433] VFS: Disk quotas dquot_6.6.0

[ 0.199510] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[ 0.199705] AppArmor: AppArmor Filesystem Enabled

[ 0.199787] pnp: PnP ACPI init

[ 0.200034] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved

[ 0.200100] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved

[ 0.200167] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved

[ 0.200232] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved

[ 0.200296] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved

[ 0.200361] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved

[ 0.200423] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved

[ 0.200485] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved

[ 0.200548] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved

[ 0.200613] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved

[ 0.201149] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved

[ 0.201255] system 00:02: [io 0x0500-0x057f] has been reserved

[ 0.201320] system 00:02: [io 0x0480-0x04bf] has been reserved

[ 0.201504] pnp: PnP ACPI: found 7 devices

[ 0.207490] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

[ 0.207634] NET: Registered PF_INET protocol family

[ 0.207861] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)

[ 0.210457] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)

[ 0.210642] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)

[ 0.210963] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)

[ 0.211125] TCP: Hash tables configured (established 131072 bind 65536)

[ 0.211284] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)

[ 0.211455] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)

[ 0.211569] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)

[ 0.211711] NET: Registered PF_UNIX/PF_LOCAL protocol family

[ 0.211779] NET: Registered PF_XDP protocol family

[ 0.211846] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-0b] add_size 200000 add_align 100000

[ 0.211938] pci 0000:00:1c.2: BAR 15: assigned [mem 0x8f900000-0x8fafffff 64bit pref]

[ 0.212018] pci 0000:00:1c.0: PCI bridge to [bus 01]

[ 0.212085] pci 0000:00:1c.0: bridge window [mem 0x8ea00000-0x8eafffff]

[ 0.212161] pci 0000:00:1c.1: PCI bridge to [bus 02]

[ 0.212228] pci 0000:00:1c.1: bridge window [mem 0x8eb00000-0x8ebfffff]

[ 0.212301] pci 0000:00:1c.2: PCI bridge to [bus 03-0b]

[ 0.212364] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]

[ 0.212431] pci 0000:00:1c.2: bridge window [mem 0x8f000000-0x8f7fffff]

[ 0.212497] pci 0000:00:1c.2: bridge window [mem 0x8f900000-0x8fafffff 64bit pref]

[ 0.212581] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]

[ 0.212643] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]

[ 0.212704] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000cbfff window]

[ 0.212768] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000fffff window]

[ 0.212831] pci_bus 0000:00: resource 8 [mem 0x8ea00000-0xefffffff window]

[ 0.212894] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff window]

[ 0.212956] pci_bus 0000:01: resource 1 [mem 0x8ea00000-0x8eafffff]

[ 0.213020] pci_bus 0000:02: resource 1 [mem 0x8eb00000-0x8ebfffff]

[ 0.213082] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]

[ 0.213144] pci_bus 0000:03: resource 1 [mem 0x8f000000-0x8f7fffff]

[ 0.213207] pci_bus 0000:03: resource 2 [mem 0x8f900000-0x8fafffff 64bit pref]

[ 0.214012] PCI: CLS 64 bytes, default 64

[ 0.214088] DMAR: No ATSR found

[ 0.214147] DMAR: No SATC found

[ 0.214149] Trying to unpack rootfs image as initramfs...

[ 0.214205] DMAR: IOMMU feature pgsel_inv inconsistent

[ 0.214267] DMAR: IOMMU feature pass_through inconsistent

[ 0.214329] DMAR: dmar0: Using Queued invalidation

[ 0.214456] DMAR: dmar1: Using Queued invalidation

[ 0.298404] pci 0000:00:00.0: Adding to iommu group 0

[ 0.298484] pci 0000:00:02.0: Adding to iommu group 1

[ 0.298556] pci 0000:00:04.0: Adding to iommu group 2

[ 0.298626] pci 0000:00:14.0: Adding to iommu group 3

[ 0.298696] pci 0000:00:19.0: Adding to iommu group 4

[ 0.298766] pci 0000:00:1a.0: Adding to iommu group 5

[ 0.298840] pci 0000:00:1b.0: Adding to iommu group 6

[ 0.298910] pci 0000:00:1c.0: Adding to iommu group 7

[ 0.298981] pci 0000:00:1c.1: Adding to iommu group 8

[ 0.299052] pci 0000:00:1c.2: Adding to iommu group 9

[ 0.299125] pci 0000:00:1d.0: Adding to iommu group 10

[ 0.299208] pci 0000:00:1f.0: Adding to iommu group 11

[ 0.299284] pci 0000:00:1f.2: Adding to iommu group 11

[ 0.299355] pci 0000:00:1f.3: Adding to iommu group 11

[ 0.299425] pci 0000:00:1f.6: Adding to iommu group 11

[ 0.299497] pci 0000:01:00.0: Adding to iommu group 12

[ 0.299570] pci 0000:02:00.0: Adding to iommu group 13

[ 0.300882] DMAR: Intel(R) Virtualization Technology for Directed I/O

[ 0.300950] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[ 0.301013] software IO TLB: mapped [mem 0x000000007adb8000-0x000000007edb8000] (64MB)

[ 0.301719] Initialise system trusted keyrings

[ 0.301796] Key type blacklist registered

[ 0.301914] workingset: timestamp_bits=36 max_order=22 bucket_order=0

[ 0.304060] zbud: loaded

[ 0.304363] integrity: Platform Keyring initialized

[ 0.304427] Key type asymmetric registered

[ 0.304487] Asymmetric key parser 'x509' registered

[ 0.885482] Freeing initrd memory: 75248K

[ 0.891124] alg: self-tests for CTR-KDF (hmac(sha256)) passed

[ 0.891218] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)

[ 0.891338] io scheduler mq-deadline registered

[ 0.892402] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26

[ 0.892719] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27

[ 0.893021] pcieport 0000:00:1c.2: PME: Signaling with IRQ 28

[ 0.893117] pcieport 0000:00:1c.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+

[ 0.893359] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[ 0.896628] thermal LNXTHERM:00: registered as thermal_zone0

[ 0.896694] ACPI: thermal: Thermal Zone [THM0] (72 C)

[ 0.897626] thermal LNXTHERM:01: registered as thermal_zone1

[ 0.897690] ACPI: thermal: Thermal Zone [THM1] (27 C)

[ 0.897908] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[ 0.898610] Linux agpgart interface v0.103

[ 0.903282] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)

[ 0.959651] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.

[ 0.960786] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12

[ 0.963808] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 0.963876] serio: i8042 AUX port at 0x60,0x64 irq 12

[ 0.964171] mousedev: PS/2 mouse device common for all mice

[ 0.964292] rtc_cmos 00:03: RTC can wake from S4

[ 0.964728] rtc_cmos 00:03: registered as rtc0

[ 0.964838] rtc_cmos 00:03: setting system clock to 2022-06-18T22:54:34 UTC (1655592874)

[ 0.964936] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs

[ 0.965350] intel_pstate: Intel P-state driver initializing

[ 0.965832] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0

[ 0.966408] ledtrig-cpu: registered to indicate activity on CPUs

[ 0.996835] NET: Registered PF_INET6 protocol family

[ 1.003170] Segment Routing with IPv6

[ 1.003259] In-situ OAM (IOAM) with IPv6

[ 1.003344] mip6: Mobile IPv6

[ 1.003404] NET: Registered PF_PACKET protocol family

[ 1.003707] mpls_gso: MPLS GSO support

[ 1.004953] microcode: sig=0x306a9, pf=0x10, revision=0x21

[ 1.005100] microcode: Microcode Update Driver: v2.2.

[ 1.005106] IPI shorthand broadcast: enabled

[ 1.005238] sched_clock: Marking stable (995028174, 9758083)->(1010860053, -6073796)

[ 1.005774] registered taskstats version 1

[ 1.005836] Loading compiled-in X.509 certificates

[ 1.072157] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'

[ 1.072246] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'

[ 1.073028] zswap: loaded using pool lzo/zbud

[ 1.073676] Key type ._fscrypt registered

[ 1.073735] Key type .fscrypt registered

[ 1.073792] Key type fscrypt-provisioning registered

[ 1.078485] Key type encrypted registered

[ 1.078575] AppArmor: AppArmor sha1 policy hashing enabled

[ 1.078643] ima: Allocated hash algorithm: sha256

[ 1.176363] ima: No architecture policies found

[ 1.176450] evm: Initialising EVM extended attributes:

[ 1.176507] evm: security.selinux

[ 1.176563] evm: security.SMACK64 (disabled)

[ 1.176619] evm: security.SMACK64EXEC (disabled)

[ 1.176675] evm: security.SMACK64TRANSMUTE (disabled)

[ 1.176732] evm: security.SMACK64MMAP (disabled)

[ 1.176789] evm: security.apparmor

[ 1.176844] evm: security.ima

[ 1.176899] evm: security.capability

[ 1.176954] evm: HMAC attrs: 0x1

[ 1.289762] Freeing unused decrypted memory: 2036K

[ 1.290289] Freeing unused kernel image (initmem) memory: 2500K

[ 1.303291] Write protecting the kernel read-only data: 24576k

[ 1.304465] Freeing unused kernel image (text/rodata gap) memory: 2040K

[ 1.305203] Freeing unused kernel image (rodata/data gap) memory: 1680K

[ 1.327286] tsc: Refined TSC clocksource calibration: 2294.786 MHz

[ 1.327378] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113f7e44a7, max_idle_ns: 440795281465 ns

[ 1.398701] x86/mm: Checked W+X mappings: passed, no W+X pages found.

[ 1.398765] x86/mm: Checking user space page tables

[ 1.398832] clocksource: Switched to clocksource tsc

[ 1.442623] x86/mm: Checked W+X mappings: passed, no W+X pages found.

[ 1.442686] Run /init as init process

[ 1.442741] with arguments:

[ 1.442742] /init

[ 1.442743] with environment:

[ 1.442744] HOME=/

[ 1.442745] TERM=linux

[ 1.442745] BOOT_IMAGE=/vmlinuz-5.18.0-1-amd64

[ 1.583574] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input3

[ 1.595829] pps_core: LinuxPPS API ver. 1 registered

[ 1.595948] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

[ 1.600812] ACPI: battery: Slot [BAT0] (battery present)

[ 1.600947] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20211217/utaddress-204)

[ 1.601051] ACPI: OSL: Resource conflict; ACPI support missing from driver?

[ 1.601163] ACPI: battery: Slot [BAT1] (battery absent)

[ 1.601167] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20211217/utaddress-204)

[ 1.601322] ACPI: OSL: Resource conflict; ACPI support missing from driver?

[ 1.601389] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20211217/utaddress-204)

[ 1.601489] ACPI: OSL: Resource conflict; ACPI support missing from driver?

[ 1.601553] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20211217/utaddress-204)

[ 1.601649] ACPI: OSL: Resource conflict; ACPI support missing from driver?

[ 1.601711] lpc_ich: Resource conflict(s) found affecting gpio_ich

[ 1.603691] PTP clock support registered

[ 1.605028] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt

[ 1.605305] i2c i2c-0: 2/2 memory slots populated (from DMI)

[ 1.605892] ACPI: button: Sleep Button [SLPB]

[ 1.606015] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input4

[ 1.606145] ACPI: button: Lid Switch [LID]

[ 1.606266] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5

[ 1.606321] i2c i2c-0: Successfully instantiated SPD at 0x50

[ 1.606390] ACPI: button: Power Button [PWRF]

[ 1.606737] i2c i2c-0: Successfully instantiated SPD at 0x51

[ 1.615698] sdhci: Secure Digital Host Controller Interface driver

[ 1.615765] sdhci: Copyright(c) Pierre Ossman

[ 1.617571] ACPI: bus type USB registered

[ 1.617653] usbcore: registered new interface driver usbfs

[ 1.617720] usbcore: registered new interface driver hub

[ 1.617791] usbcore: registered new device driver usb

[ 1.624305] cryptd: max_cpu_qlen set to 1000

[ 1.627292] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 1.628634] e1000e: Intel(R) PRO/1000 Network Driver

[ 1.628668] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e822] (rev 7)

[ 1.628693] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.

[ 1.628834] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode

[ 1.629019] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes

[ 1.635572] ehci-pci: EHCI PCI platform driver

[ 1.635828] ehci-pci 0000:00:1a.0: EHCI Host Controller

[ 1.635900] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1

[ 1.635986] ehci-pci 0000:00:1a.0: debug port 2

[ 1.639672] SCSI subsystem initialized

[ 1.639989] ehci-pci 0000:00:1a.0: irq 19, io mem 0x8f83f000

[ 1.642007] ACPI: bus type drm_connector registered

[ 1.642064] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA

[ 1.644423] AVX version of gcm_enc/dec engaged.

[ 1.644778] AES CTR mode by8 optimization enabled

[ 1.655256] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00

[ 1.655407] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18

[ 1.655484] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 1.655558] usb usb1: Product: EHCI Host Controller

[ 1.655619] usb usb1: Manufacturer: Linux 5.18.0-1-amd64 ehci_hcd

[ 1.655680] usb usb1: SerialNumber: 0000:00:1a.0

[ 1.655915] hub 1-0:1.0: USB hub found

[ 1.655985] hub 1-0:1.0: 3 ports detected

[ 1.657904] ehci-pci 0000:00:1d.0: EHCI Host Controller

[ 1.657978] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2

[ 1.658065] ehci-pci 0000:00:1d.0: debug port 2

[ 1.661845] libata version 3.00 loaded.

[ 1.662048] ehci-pci 0000:00:1d.0: irq 18, io mem 0x8f840000

[ 1.669677] ahci 0000:00:1f.2: version 3.0

[ 1.669908] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled

[ 1.679271] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00

[ 1.679476] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18

[ 1.679554] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 1.679628] usb usb2: Product: EHCI Host Controller

[ 1.679688] usb usb2: Manufacturer: Linux 5.18.0-1-amd64 ehci_hcd

[ 1.679748] usb usb2: SerialNumber: 0000:00:1d.0

[ 1.679985] hub 2-0:1.0: USB hub found

[ 1.680062] hub 2-0:1.0: 3 ports detected

[ 1.680075] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode

[ 1.680200] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst

[ 1.680282] xhci_hcd 0000:00:14.0: xHCI Host Controller

[ 1.680358] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3

[ 1.681280] scsi host0: ahci

[ 1.681537] scsi host1: ahci

[ 1.681567] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930

[ 1.681756] scsi host2: ahci

[ 1.681923] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18

[ 1.681982] scsi host3: ahci

[ 1.682000] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 1.682128] usb usb3: Product: xHCI Host Controller

[ 1.682190] usb usb3: Manufacturer: Linux 5.18.0-1-amd64 xhci-hcd

[ 1.682249] scsi host4: ahci

[ 1.682252] usb usb3: SerialNumber: 0000:00:14.0

[ 1.682467] scsi host5: ahci

[ 1.682551] hub 3-0:1.0: USB hub found

[ 1.682580] ata1: SATA max UDMA/133 abar m2048@0x8f83e000 port 0x8f83e100 irq 30

[ 1.682632] hub 3-0:1.0: 4 ports detected

[ 1.682690] ata2: SATA max UDMA/133 abar m2048@0x8f83e000 port 0x8f83e180 irq 30

[ 1.682824] ata3: SATA max UDMA/133 abar m2048@0x8f83e000 port 0x8f83e200 irq 30

[ 1.682915] ata4: DUMMY

[ 1.682974] ata5: DUMMY

[ 1.683014] xhci_hcd 0000:00:14.0: xHCI Host Controller

[ 1.683045] ata6: DUMMY

[ 1.683108] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4

[ 1.683246] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed

[ 1.683408] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18

[ 1.683486] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 1.683560] usb usb4: Product: xHCI Host Controller

[ 1.683620] usb usb4: Manufacturer: Linux 5.18.0-1-amd64 xhci-hcd

[ 1.683683] usb usb4: SerialNumber: 0000:00:14.0

[ 1.683877] hub 4-0:1.0: USB hub found

[ 1.683956] hub 4-0:1.0: 4 ports detected

[ 1.741254] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock

[ 1.802137] i915 0000:00:02.0: [drm] VT-d active for gfx access

[ 1.802205] i915 0000:00:02.0: vgaarb: deactivate vga console

[ 1.803129] Console: switching to colour dummy device 80x25

[ 1.803183] i915 0000:00:02.0: [drm] Transparent Hugepage mode 'huge=within_size'

[ 1.803198] i915 0000:00:02.0: [drm] DMAR active, disabling use of stolen memory

[ 1.843098] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 54:ee:75:13:62:87

[ 1.843111] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection

[ 1.843168] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF

[ 1.854658] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem

[ 1.908820] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

[ 1.909058] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

[ 1.915378] usb 1-1: new high-speed USB device number 2 using ehci-pci

[ 1.932074] acpi device:0d: registered as cooling_device9

[ 1.932144] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8

[ 1.939287] usb 3-1: new high-speed USB device number 2 using xhci_hcd

[ 1.939333] usb 2-1: new high-speed USB device number 2 using ehci-pci

[ 1.998243] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[ 1.999080] ata1.00: supports DRM functions and may not be fully accessible

[ 1.999087] ata1.00: ATA-10: KINGSTON SKC6001024G, S4500107, max UDMA/133

[ 1.999162] ata1.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 32), AA

[ 2.000179] ata1.00: Features: Trust Dev-Sleep

[ 2.000414] ata1.00: supports DRM functions and may not be fully accessible

[ 2.001311] ata1.00: configured for UDMA/133

[ 2.011846] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC6001 0107 PQ: 0 ANSI: 5

[ 2.072073] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00

[ 2.072097] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 2.072685] hub 1-1:1.0: USB hub found

[ 2.073340] hub 1-1:1.0: 6 ports detected

[ 2.098840] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 4.02

[ 2.098855] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 2.098860] usb 3-1: Product: USB2.0 Hub

[ 2.098863] usb 3-1: Manufacturer: GenesysLogic

[ 2.099940] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00

[ 2.099974] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 2.100107] hub 3-1:1.0: USB hub found

[ 2.100368] hub 2-1:1.0: USB hub found

[ 2.100532] hub 2-1:1.0: 8 ports detected

[ 2.101414] hub 3-1:1.0: 4 ports detected

[ 2.223483] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd

[ 2.230092] fbcon: i915drmfb (fb0) is primary device

[ 2.248428] usb 4-1: New USB device found, idVendor=05e3, idProduct=0616, bcdDevice= 4.02

[ 2.248437] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 2.248441] usb 4-1: Product: USB3.0 Hub

[ 2.248444] usb 4-1: Manufacturer: GenesysLogic

[ 2.250150] hub 4-1:1.0: USB hub found

[ 2.250712] hub 4-1:1.0: 4 ports detected

[ 2.330190] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[ 2.358445] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133

[ 2.367276] usb 1-1.3: new full-speed USB device number 3 using ehci-pci

[ 2.367587] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA

[ 2.371331] usb 3-3: new high-speed USB device number 3 using xhci_hcd

[ 2.391291] usb 2-1.5: new full-speed USB device number 3 using ehci-pci

[ 2.417552] ata2.00: configured for UDMA/133

[ 2.427105] scsi 1:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5

[ 2.476942] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01

[ 2.476953] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 2.476957] usb 1-1.3: Product: Biometric Coprocessor

[ 2.476959] usb 1-1.3: Manufacturer: Auth

[ 2.502308] usb 2-1.5: New USB device found, idVendor=056a, idProduct=00e6, bcdDevice= 1.39

[ 2.502326] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 2.502329] usb 2-1.5: Product: ISD-V4

[ 2.502330] usb 2-1.5: Manufacturer: Tablet

[ 2.520523] hid: raw HID events driver (C) Jiri Kosina

[ 2.523645] usb 3-3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= 0.00

[ 2.523649] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 2.524360] hub 3-3:1.0: USB hub found

[ 2.524391] hub 3-3:1.0: 4 ports detected

[ 2.555331] usb 1-1.4: new full-speed USB device number 4 using ehci-pci

[ 2.583327] usb 2-1.6: new full-speed USB device number 4 using ehci-pci

[ 2.607328] usb 3-1.2: new high-speed USB device number 4 using xhci_hcd

[ 2.667687] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.11

[ 2.667697] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 2.667701] usb 1-1.4: Product: USB Receiver

[ 2.667704] usb 1-1.4: Manufacturer: Logitech

[ 2.696194] usbcore: registered new interface driver usbhid

[ 2.696199] usbhid: USB HID core driver

[ 2.701665] usb 2-1.6: New USB device found, idVendor=08e6, idProduct=34ec, bcdDevice= 1.00

[ 2.701674] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 2.701678] usb 2-1.6: Product: GemPC Express

[ 2.701681] usb 2-1.6: Manufacturer: Gemplus

[ 2.718639] usb 3-1.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 4.02

[ 2.718646] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 2.718649] usb 3-1.2: Product: USB2.0 Hub

[ 2.718652] usb 3-1.2: Manufacturer: GenesysLogic

[ 2.719954] hub 3-1.2:1.0: USB hub found

[ 2.721309] hub 3-1.2:1.0: 4 ports detected

[ 2.745821] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 2.746234] ata3.00: supports DRM functions and may not be fully accessible

[ 2.746238] ata3.00: ATA-11: KINGSTON SUV500MS240G, 003056RR, max UDMA/133

[ 2.746387] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA

[ 2.747270] usb 1-1.5: new full-speed USB device number 5 using ehci-pci

[ 2.747879] ata3.00: supports DRM functions and may not be fully accessible

[ 2.749050] ata3.00: configured for UDMA/133

[ 2.749430] scsi 2:0:0:0: Direct-Access ATA KINGSTON SUV500M 56RR PQ: 0 ANSI: 5

[ 2.795727] usb 4-1.2: new SuperSpeed USB device number 3 using xhci_hcd

[ 2.820285] usb 4-1.2: New USB device found, idVendor=05e3, idProduct=0616, bcdDevice= 4.02

[ 2.820295] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 2.820299] usb 4-1.2: Product: USB3.0 Hub

[ 2.820302] usb 4-1.2: Manufacturer: GenesysLogic

[ 2.821893] hub 4-1.2:1.0: USB hub found

[ 2.822391] hub 4-1.2:1.0: 4 ports detected

[ 2.858317] usb 1-1.5: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01

[ 2.858328] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 2.895313] usb 3-1.4: new full-speed USB device number 5 using xhci_hcd

[ 2.943339] usb 1-1.6: new high-speed USB device number 6 using ehci-pci

[ 3.004091] usb 3-1.4: New USB device found, idVendor=10d5, idProduct=6557, bcdDevice=30.02

[ 3.004101] usb 3-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 3.059824] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2ea, bcdDevice= 5.20

[ 3.059835] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 3.059838] usb 1-1.6: Product: Integrated Camera

[ 3.059841] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.

[ 3.079313] usb 3-3.1: new full-speed USB device number 6 using xhci_hcd

[ 3.096990] Console: switching to colour frame buffer device 170x48

[ 3.169040] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

[ 3.180682] usb 3-3.1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54

[ 3.182005] usb 3-3.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0

[ 3.183339] usb 3-3.1: Product: USB2.0-Ser!

[ 3.205013] e1000e 0000:00:19.0 eno0: renamed from eth0

[ 3.208239] input: Tablet ISD-V4 Stylus as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:056A:00E6.0001/input/input9

[ 3.209245] input: Tablet ISD-V4 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:056A:00E6.0001/input/input10

[ 3.210344] hid-generic 0003:056A:00E6.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input0

[ 3.211606] input: Tablet ISD-V4 Touchscreen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:056A:00E6.0002/input/input11

[ 3.213625] input: Tablet ISD-V4 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:056A:00E6.0002/input/input12

[ 3.214671] input: Tablet ISD-V4 Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:056A:00E6.0002/input/input13

[ 3.217755] hid-generic 0003:056A:00E6.0002: input,hiddev1,hidraw1: USB HID v1.11 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input1

[ 3.218837] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C52B.0003/input/input14

[ 3.225844] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)

[ 3.225852] sd 2:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)

[ 3.225872] sd 0:0:0:0: [sdc] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB)

[ 3.225876] sd 0:0:0:0: [sdc] 4096-byte physical blocks

[ 3.225892] sd 0:0:0:0: [sdc] Write Protect is off

[ 3.225896] sd 0:0:0:0: [sdc] Mode Sense: 00 3a 00 00

[ 3.225926] sd 0:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 3.226730] sd 1:0:0:0: [sdb] 4096-byte physical blocks

[ 3.227497] sd 2:0:0:0: [sda] 4096-byte physical blocks

[ 3.232132] sd 2:0:0:0: [sda] Write Protect is off

[ 3.232909] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 3.232926] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 3.232952] sd 1:0:0:0: [sdb] Write Protect is off

[ 3.234465] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00

[ 3.234489] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 3.249936] sdc: sdc1 sdc2 < sdc5 >

[ 3.263258] usb 3-1.2.3: new high-speed USB device number 7 using xhci_hcd

[ 3.263620] sda: sda1 sda2

[ 3.275699] sd 0:0:0:0: [sdc] supports TCG Opal

[ 3.276490] sd 0:0:0:0: [sdc] Attached SCSI disk

[ 3.279420] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input0

[ 3.280268] sdb: sdb1

[ 3.280444] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0004/input/input15

[ 3.282009] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0004/input/input16

[ 3.295330] sd 2:0:0:0: [sda] Attached SCSI disk

[ 3.331485] sd 1:0:0:0: [sdb] Attached SCSI disk

[ 3.343418] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0004/input/input17

[ 3.345295] hid-generic 0003:046D:C52B.0004: input,hiddev2,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input1

[ 3.347209] hid-generic 0003:046D:C52B.0005: hiddev3,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input2

[ 3.349146] input: HID 10d5:6557 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.4/3-1.4:1.0/0003:10D5:6557.0006/input/input19

[ 3.367870] usb 3-1.2.3: New USB device found, idVendor=045b, idProduct=0209, bcdDevice= 1.00

[ 3.369628] usb 3-1.2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 3.371080] hub 3-1.2.3:1.0: USB hub found

[ 3.371984] hub 3-1.2.3:1.0: 3 ports detected

[ 3.407407] hid-generic 0003:10D5:6557.0006: input,hidraw5: USB HID v2.00 Keyboard [HID 10d5:6557] on usb-0000:00:14.0-1.4/input0

[ 3.408496] input: HID 10d5:6557 Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.4/3-1.4:1.1/0003:10D5:6557.0007/input/input20

[ 3.409499] input: HID 10d5:6557 System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.4/3-1.4:1.1/0003:10D5:6557.0007/input/input21

[ 3.447266] usb 3-3.2: new full-speed USB device number 8 using xhci_hcd

[ 3.467320] input: HID 10d5:6557 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.4/3-1.4:1.1/0003:10D5:6557.0007/input/input22

[ 3.468596] hid-generic 0003:10D5:6557.0007: input,hidraw6: USB HID v2.00 Mouse [HID 10d5:6557] on usb-0000:00:14.0-1.4/input1

[ 3.551139] usb 3-3.2: New USB device found, idVendor=0922, idProduct=0019, bcdDevice= 0.4e

[ 3.553066] usb 3-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[ 3.554918] usb 3-3.2: Product: DYMO LabelWriter 400

[ 3.556772] usb 3-3.2: Manufacturer: DYMO

[ 3.558565] usb 3-3.2: SerialNumber: 05042808370556

[ 3.659332] usb 3-1.2.3.3: new full-speed USB device number 9 using xhci_hcd

[ 3.755580] input: Wacom ISDv4 E6 Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:056A:00E6.0001/input/input23

[ 3.762338] usb 3-1.2.3.3: New USB device found, idVendor=056d, idProduct=4027, bcdDevice=80.00

[ 3.763535] usb 3-1.2.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 3.764703] usb 3-1.2.3.3: Product: EIZO USB HID Monitor

[ 3.765853] usb 3-1.2.3.3: Manufacturer: EIZO

[ 3.771828] hid-generic 0003:056D:4027.0008: hiddev0,hidraw0: USB HID v1.10 Device [EIZO EIZO USB HID Monitor] on usb-0000:00:14.0-1.2.3.3/input0

[ 3.779343] wacom 0003:056A:00E6.0001: hidraw2: USB HID v1.11 Device [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input0

[ 3.799665] logitech-djreceiver 0003:046D:C52B.0005: hiddev2,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input2

[ 3.839344] usb 3-3.4: new high-speed USB device number 10 using xhci_hcd

[ 3.860575] input: Wacom ISDv4 E6 Finger as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:056A:00E6.0002/input/input27

[ 3.862456] wacom 0003:056A:00E6.0002: hidraw1: USB HID v1.11 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input1

[ 3.921322] input: Logitech Wireless Device PID:406f Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0005/0003:046D:406F.0009/input/input29

[ 3.927531] input: Logitech Wireless Device PID:406f Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0005/0003:046D:406F.0009/input/input30

[ 3.937230] hid-generic 0003:046D:406F.0009: input,hidraw4: USB HID v1.11 Keyboard [Logitech Wireless Device PID:406f] on usb-0000:00:1a.0-1.4/input2:1

[ 3.940789] input: Logitech Wireless Device PID:405e Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0005/0003:046D:405E.000A/input/input34

[ 3.945250] input: Logitech Wireless Device PID:405e Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0005/0003:046D:405E.000A/input/input35

[ 3.949562] hid-generic 0003:046D:405E.000A: input,hidraw7: USB HID v1.11 Keyboard [Logitech Wireless Device PID:405e] on usb-0000:00:1a.0-1.4/input2:2

[ 4.031160] usb 3-3.4: New USB device found, idVendor=054c, idProduct=01bd, bcdDevice= 5.23

[ 4.033285] usb 3-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[ 4.035333] usb 3-3.4: Product: Silicon Media R/W

[ 4.037338] usb 3-3.4: Manufacturer: Sony

[ 4.039317] usb 3-3.4: SerialNumber: 000000132F1B

[ 4.061439] usb-storage 3-3.4:1.0: USB Mass Storage device detected

[ 4.062794] scsi host6: usb-storage 3-3.4:1.0

[ 4.064075] usbcore: registered new interface driver usb-storage

[ 4.067311] usbcore: registered new interface driver uas

[ 4.146654] input: Logitech MX Ergo as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0005/0003:046D:406F.0009/input/input39

[ 4.149656] logitech-hidpp-device 0003:046D:406F.0009: input,hidraw4: USB HID v1.11 Keyboard [Logitech MX Ergo] on usb-0000:00:1a.0-1.4/input2:1

[ 4.326792] input: Logitech M720 Triathlon as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0005/0003:046D:405E.000A/input/input40

[ 4.329612] logitech-hidpp-device 0003:046D:405E.000A: input,hidraw7: USB HID v1.11 Keyboard [Logitech M720 Triathlon] on usb-0000:00:1a.0-1.4/input2:2

[ 4.398585] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.

[ 4.400919] device-mapper: uevent: version 1.0.3

[ 4.402100] device-mapper: ioctl: 4.46.0-ioctl (2022-02-22) initialised: dm-devel@redhat.com

[ 4.507241] raid6: sse2x4 gen() 14694 MB/s

[ 4.575242] raid6: sse2x2 gen() 16712 MB/s

[ 4.643242] raid6: sse2x1 gen() 13268 MB/s

[ 4.644151] raid6: using algorithm sse2x2 gen() 16712 MB/s

[ 4.711242] raid6: .... xor() 9170 MB/s, rmw enabled

[ 4.712139] raid6: using ssse3x2 recovery algorithm

[ 4.714114] xor: automatically using best checksumming function avx

[ 4.715725] async_tx: api initialized (async)

[ 5.081979] scsi 6:0:0:0: Direct-Access Sony USB HS-CF Card 5.23 PQ: 0 ANSI: 0

[ 5.085395] scsi 6:0:0:1: Direct-Access Sony USB HS-xD/SM 5.23 PQ: 0 ANSI: 0

[ 5.089267] scsi 6:0:0:2: Direct-Access Sony USB HS-MS Card 5.23 PQ: 0 ANSI: 0

[ 5.092891] scsi 6:0:0:3: Direct-Access Sony USB HS-SD Card 5.23 PQ: 0 ANSI: 0

[ 5.097300] sd 6:0:0:0: [sdd] Media removed, stopped polling

[ 5.101758] sd 6:0:0:1: [sde] Media removed, stopped polling

[ 5.106161] sd 6:0:0:2: [sdf] Media removed, stopped polling

[ 5.113858] sd 6:0:0:0: [sdd] Attached SCSI removable disk

[ 5.139017] sd 6:0:0:3: [sdg] Media removed, stopped polling

[ 5.162958] sd 6:0:0:2: [sdf] Attached SCSI removable disk

[ 5.174973] sd 6:0:0:1: [sde] Attached SCSI removable disk

[ 5.194726] sd 6:0:0:3: [sdg] Attached SCSI removable disk

[ 10.774317] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes

[ 10.866971] PM: Image not found (code -22)

[ 10.975695] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Quota mode: none.

[ 11.052673] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.

[ 11.167944] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.

[ 11.188139] systemd[1]: Inserted module 'autofs4'

[ 11.208825] systemd[1]: systemd 250.4-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)

[ 11.227465] systemd[1]: Detected architecture x86-64.

[ 11.229263] systemd[1]: Hostname set to <TP-230t>.

[ 11.588755] systemd[1]: /lib/systemd/system/clamav-freshclam.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.

[ 11.590559] systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly.

[ 11.618080] systemd[1]: Queued start job for default target Graphical Interface.

[ 11.620610] systemd[1]: Created slice Slice /system/getty.

[ 11.621768] systemd[1]: Created slice Slice /system/modprobe.

[ 11.624701] systemd[1]: Created slice Cryptsetup Units Slice.

[ 11.627750] systemd[1]: Created slice Slice /system/systemd-fsck.

[ 11.631956] systemd[1]: Created slice User and Session Slice.

[ 11.636153] systemd[1]: Started Forward Password Requests to Wall Directory Watch.

[ 11.640892] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.

[ 11.645298] systemd[1]: Reached target Local Integrity Protected Volumes.

[ 11.650074] systemd[1]: Reached target User and Group Name Lookups.

[ 11.651888] systemd[1]: Reached target Remote File Systems.

[ 11.656622] systemd[1]: Reached target Slice Units.

[ 11.661531] systemd[1]: Reached target Local Verity Protected Volumes.

[ 11.666368] systemd[1]: Listening on Device-mapper event daemon FIFOs.

[ 11.671073] systemd[1]: Listening on LVM2 poll daemon socket.

[ 11.675698] systemd[1]: Listening on Syslog Socket.

[ 11.680270] systemd[1]: Listening on fsck to fsckd communication Socket.

[ 11.684421] systemd[1]: Listening on initctl Compatibility Named Pipe.

[ 11.688847] systemd[1]: Listening on Journal Audit Socket.

[ 11.692771] systemd[1]: Listening on Journal Socket (/dev/log).

[ 11.696517] systemd[1]: Listening on Journal Socket.

[ 11.700152] systemd[1]: Listening on udev Control Socket.

[ 11.703192] systemd[1]: Listening on udev Kernel Socket.

[ 11.707265] systemd[1]: Mounting Huge Pages File System...

[ 11.709580] systemd[1]: Mounting POSIX Message Queue File System...

[ 11.711921] systemd[1]: Mounting Kernel Debug File System...

[ 11.713955] systemd[1]: Mounting Kernel Trace File System...

[ 11.715370] systemd[1]: Finished Availability of block devices.

[ 11.718820] systemd[1]: Starting Set the console keyboard layout...

[ 11.722197] systemd[1]: Starting Create List of Static Device Nodes...

[ 11.724097] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...

[ 11.725818] systemd[1]: Starting Load Kernel Module configfs...

[ 11.727809] systemd[1]: Starting Load Kernel Module drm...

[ 11.729598] systemd[1]: Starting Load Kernel Module fuse...

[ 11.730550] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathExists=!/run/initramfs/fsck-root).

[ 11.733012] systemd[1]: Starting Journal Service...

[ 11.736068] systemd[1]: Starting Load Kernel Modules...

[ 11.738265] systemd[1]: Starting Remount Root and Kernel File Systems...

[ 11.740081] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.

[ 11.741388] systemd[1]: Starting Coldplug All udev Devices...

[ 11.745096] fuse: init (API version 7.36)

[ 11.746530] systemd[1]: Mounted Huge Pages File System.

[ 11.747527] systemd[1]: Mounted POSIX Message Queue File System.

[ 11.748406] EXT4-fs (dm-1): re-mounted. Quota mode: none.

[ 11.750105] loop: module loaded

[ 11.751075] systemd[1]: Mounted Kernel Debug File System.

[ 11.753142] systemd[1]: Mounted Kernel Trace File System.

[ 11.755094] systemd[1]: Finished Set the console keyboard layout.

[ 11.756986] systemd[1]: Finished Create List of Static Device Nodes.

[ 11.758947] systemd[1]: modprobe@configfs.service: Deactivated successfully.

[ 11.759079] systemd[1]: Finished Load Kernel Module configfs.

[ 11.761626] systemd[1]: modprobe@drm.service: Deactivated successfully.

[ 11.761661] lp: driver loaded but no devices found

[ 11.761776] systemd[1]: Finished Load Kernel Module drm.

[ 11.764973] systemd[1]: modprobe@fuse.service: Deactivated successfully.

[ 11.765104] systemd[1]: Finished Load Kernel Module fuse.

[ 11.766566] ppdev: user-space parallel port driver

[ 11.768299] systemd[1]: Finished Remount Root and Kernel File Systems.

[ 11.771132] systemd[1]: Mounting FUSE Control File System...

[ 11.772976] systemd[1]: Mounting Kernel Configuration File System...

[ 11.774220] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).

[ 11.775194] systemd[1]: Starting Load/Save Random Seed...

[ 11.777742] systemd[1]: Starting Create System Users...

[ 11.780271] systemd[1]: Finished Load Kernel Modules.

[ 11.781854] systemd[1]: Mounted FUSE Control File System.

[ 11.783301] systemd[1]: Mounted Kernel Configuration File System.

[ 11.786023] systemd[1]: Finished Load/Save Random Seed.

[ 11.788517] systemd[1]: First Boot Complete was skipped because of a failed condition check (ConditionFirstBoot=yes).

[ 11.789636] systemd[1]: Starting Apply Kernel Variables...

[ 11.796216] systemd[1]: Finished Create System Users.

[ 11.798618] systemd[1]: Starting Create Static Device Nodes in /dev...

[ 11.799869] systemd[1]: Finished Apply Kernel Variables.

[ 11.814905] systemd[1]: Finished Create Static Device Nodes in /dev.

[ 11.817203] systemd[1]: Starting Rule-based Manager for Device Events and Files...

[ 11.829021] systemd[1]: Started Journal Service.

[ 11.837328] systemd-journald[552]: Received client request to flush runtime journal.

[ 12.033173] ACPI: AC: AC Adapter [AC] (on-line)

[ 12.044302] iTCO_vendor_support: vendor-support=0

[ 12.049509] sd 0:0:0:0: Attached scsi generic sg0 type 0

[ 12.050456] sd 1:0:0:0: Attached scsi generic sg1 type 0

[ 12.055256] sd 2:0:0:0: Attached scsi generic sg2 type 0

[ 12.059229] iTCO_wdt iTCO_wdt.1.auto: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)

[ 12.059276] sd 6:0:0:0: Attached scsi generic sg3 type 0

[ 12.059589] Non-volatile memory driver v1.3

[ 12.062355] sd 6:0:0:1: Attached scsi generic sg4 type 0

[ 12.062414] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)

[ 12.062521] at24 0-0050: supply vcc not found, using dummy regulator

[ 12.063265] at24 0-0050: 256 byte spd EEPROM, read-only

[ 12.064833] sd 6:0:0:2: Attached scsi generic sg5 type 0

[ 12.065668] at24 0-0051: supply vcc not found, using dummy regulator

[ 12.068276] sd 6:0:0:3: Attached scsi generic sg6 type 0

[ 12.069044] at24 0-0051: 256 byte spd EEPROM, read-only

[ 12.069140] input: PC Speaker as /devices/platform/pcspkr/input/input41

[ 12.079693] thinkpad_acpi: ThinkPad ACPI Extras v0.26

[ 12.080577] thinkpad_acpi: http://ibm-acpi.sf.net/

[ 12.081444] thinkpad_acpi: ThinkPad BIOS CBET4000 CoreBoot 4.15 X230 Tablet, EC GCHT25WW-3.22

[ 12.082314] thinkpad_acpi: Lenovo ThinkPad X230 Tablet, model 20OJKGY

[ 12.083614] thinkpad_acpi: radio switch found; radios are enabled

[ 12.084625] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode

[ 12.085557] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver

[ 12.086529] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...

[ 12.089373] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked

[ 12.103031] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one

[ 12.104719] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)

[ 12.108187] thinkpad_acpi: secondary fan control detected & enabled

[ 12.110601] thinkpad_acpi: battery 1 registered (start 0, stop 100, behaviours: 0x1)

[ 12.112113] ACPI: battery: new extension: ThinkPad Battery Extension

[ 12.113972] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input42

[ 12.190816] cfg80211: Loading compiled-in X.509 certificates for regulatory database

[ 12.191131] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'

[ 12.191537] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'

[ 12.193277] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'

[ 12.197481] platform regulatory.0: firmware: direct-loading firmware regulatory.db

[ 12.197604] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer

[ 12.197823] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s

[ 12.200020] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules

[ 12.200022] RAPL PMU: hw unit of domain package 2^-16 Joules

[ 12.200022] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules

[ 12.210086] Adding 1003516k swap on /dev/mapper/TP--230t--vg-swap_1. Priority:-2 extents:1 across:1003516k SSFS

[ 12.272738] Intel(R) Wireless WiFi driver for Linux

[ 12.293833] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-cc-a0-72.ucode (-2)

[ 12.294830] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware

[ 12.295837] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-72.ucode failed with error -2

[ 12.307230] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-cc-a0-71.ucode

[ 12.308279] iwlwifi 0000:02:00.0: api flags index 2 larger than supported by driver

[ 12.308308] iwlwifi 0000:02:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37

[ 12.310873] iwlwifi 0000:02:00.0: firmware: failed to load iwl-debug-yoyo.bin (-2)

[ 12.310881] iwlwifi 0000:02:00.0: loaded firmware version 71.058653f6.0 cc-a0-71.ucode op_mode iwlmvm

[ 12.382656] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

[ 12.493382] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker

[ 12.494443] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

[ 12.495316] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)

[ 12.496203] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0

[ 12.497025] snd_hda_codec_realtek hdaudioC0D0: inputs:

[ 12.497915] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18

[ 12.498890] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19

[ 12.499834] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12

[ 12.597294] EXT4-fs (sdc1): mounting ext2 file system using the ext4 subsystem

[ 12.599531] EXT4-fs (sdc1): mounted filesystem without journal. Quota mode: none.

[ 12.600220] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input43

[ 12.601613] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input44

[ 12.602895] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input45

[ 12.602988] iwlwifi 0000:02:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340

[ 12.603979] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input46

[ 12.605046] thermal thermal_zone3: failed to read out thermal zone (-61)

[ 12.605726] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input47

[ 12.607175] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input48

[ 12.607261] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input49

[ 12.607355] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input50

[ 12.633620] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Quota mode: none.

[ 12.674818] audit: type=1400 audit(1655585686.203:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1430 comm="apparmor_parser"

[ 12.676264] audit: type=1400 audit(1655585686.203:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=1429 comm="apparmor_parser"

[ 12.678098] audit: type=1400 audit(1655585686.207:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1423 comm="apparmor_parser"

[ 12.680350] audit: type=1400 audit(1655585686.207:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1424 comm="apparmor_parser"

[ 12.682456] audit: type=1400 audit(1655585686.207:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1424 comm="apparmor_parser"

[ 12.684710] audit: type=1400 audit(1655585686.207:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1427 comm="apparmor_parser"

[ 12.686925] audit: type=1400 audit(1655585686.207:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1427 comm="apparmor_parser"

[ 12.688248] audit: type=1400 audit(1655585686.207:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1427 comm="apparmor_parser"

[ 12.688452] intel_rapl_common: Found RAPL domain package

[ 12.689458] audit: type=1400 audit(1655585686.211:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=1426 comm="apparmor_parser"

[ 12.690624] intel_rapl_common: Found RAPL domain core

[ 12.693037] audit: type=1400 audit(1655585686.211:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1432 comm="apparmor_parser"

[ 12.694480] intel_rapl_common: Found RAPL domain uncore

[ 12.766090] iwlwifi 0000:02:00.0: Detected RF HR B3, rfid=0x10a100

[ 12.831555] iwlwifi 0000:02:00.0: base HW address: 34:13:e8:b5:b1:7f

[ 12.853652] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0

[ 13.044124] process '/usr/bin/anydesk' started with executable stack

[ 13.070942] NET: Registered PF_QIPCRTR protocol family

[ 13.960640] mc: Linux media interface: v0.10

[ 14.010070] videodev: Linux video capture interface: v2.00

[ 14.018020] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)

[ 14.061402] usblp 3-3.2:1.0: usblp1: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x0922 pid 0x0019

[ 14.064211] usbcore: registered new interface driver usblp

[ 14.068248] usbcore: registered new interface driver usbserial_generic

[ 14.068696] usbserial: USB Serial support registered for generic

[ 14.079448] usb 1-1.6: Found UVC 1.00 device Integrated Camera (04f2:b2ea)

[ 14.089950] usbcore: registered new interface driver ch341

[ 14.090590] usbserial: USB Serial support registered for ch341-uart

[ 14.090639] ch341 3-3.1:1.0: ch341-uart converter detected

[ 14.095833] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input51

[ 14.095886] ch341-uart ttyUSB0: break control not supported, using simulated break

[ 14.095956] usb 3-3.1: ch341-uart converter now attached to ttyUSB0

[ 14.097439] usbcore: registered new interface driver uvcvideo

[ 14.348804] Bluetooth: Core ver 2.22

[ 14.348855] NET: Registered PF_BLUETOOTH protocol family

[ 14.348858] Bluetooth: HCI device and connection manager initialized

[ 14.349714] Bluetooth: HCI socket layer initialized

[ 14.349723] Bluetooth: L2CAP socket layer initialized

[ 14.349732] Bluetooth: SCO socket layer initialized

[ 14.389395] usbcore: registered new interface driver btusb

[ 14.424793] bluetooth hci0: firmware: direct-loading firmware intel/ibt-20-1-3.sfi

[ 14.424806] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi

[ 14.424846] Bluetooth: hci0: Boot Address: 0x24800

[ 14.424850] Bluetooth: hci0: Firmware Version: 126-5.22

[ 14.441148] usb 1-1.5: USB disconnect, device number 5

[ 14.443279] Bluetooth: hci0: FW download error recovery failed (-19)

[ 14.538217] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[ 14.538225] Bluetooth: BNEP filters: protocol multicast

[ 14.538232] Bluetooth: BNEP socket layer initialized

[ 14.823269] usb 1-1.5: new full-speed USB device number 7 using ehci-pci

[ 14.937276] usb 1-1.5: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01

[ 14.937287] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 14.940220] Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017

[ 14.941295] Bluetooth: hci0: Device revision is 1

[ 14.941303] Bluetooth: hci0: Secure boot is enabled

[ 14.941305] Bluetooth: hci0: OTP lock is enabled

[ 14.941307] Bluetooth: hci0: API lock is enabled

[ 14.941309] Bluetooth: hci0: Debug lock is disabled

[ 14.941311] Bluetooth: hci0: Minimum firmware build 1 week 10 2014

[ 14.941604] bluetooth hci0: firmware: direct-loading firmware intel/ibt-20-1-3.sfi

[ 14.941615] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi

[ 14.941653] Bluetooth: hci0: Boot Address: 0x24800

[ 14.941657] Bluetooth: hci0: Firmware Version: 126-5.22

[ 16.557275] e1000e 0000:00:19.0 eno0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None

[ 16.568643] IPv6: ADDRCONF(NETDEV_CHANGE): eno0: link becomes ready

[ 16.596267] Bluetooth: hci0: Waiting for firmware download to complete

[ 16.597272] Bluetooth: hci0: Firmware loaded in 1616848 usecs

[ 16.597340] Bluetooth: hci0: Waiting for device to boot

[ 16.612283] Bluetooth: hci0: Device booted in 14624 usecs

[ 16.612585] bluetooth hci0: firmware: direct-loading firmware intel/ibt-20-1-3.ddc

[ 16.612593] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddc

[ 16.614276] Bluetooth: hci0: Applying Intel DDC parameters completed

[ 16.615282] Bluetooth: hci0: Firmware revision 0.3 build 126 week 5 2022

[ 16.682514] NET: Registered PF_ALG protocol family

[ 16.720717] wlp2s0: authenticate with 44:4e:6d:04:50:0f

[ 16.720740] wlp2s0: Invalid HE elem, Disable HE

[ 16.727965] wlp2s0: send auth to 44:4e:6d:04:50:0f (try 1/3)

[ 16.865010] wlp2s0: authenticate with 44:4e:6d:04:50:0f

[ 16.865022] wlp2s0: send auth to 44:4e:6d:04:50:0f (try 1/3)

[ 16.907374] wlp2s0: authenticated

[ 16.911276] wlp2s0: associate with 44:4e:6d:04:50:0f (try 1/3)

[ 16.916574] wlp2s0: RX AssocResp from 44:4e:6d:04:50:0f (capab=0x1511 status=0 aid=2)

[ 16.919892] wlp2s0: associated

[ 17.055786] wlp2s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 44:4e:6d:04:50:0f

[ 17.136185] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready

[ 19.086375] rfkill: input handler disabled

[ 19.439656] usblp1: removed

[ 19.445799] usblp 3-3.2:1.0: usblp1: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x0922 pid 0x0019

[ 26.214403] rfkill: input handler enabled

[ 30.080773] rfkill: input handler disabled