|
|
|
|
|
coreboot-4.13-2450-gb77cf2299c Wed Mar 3 09:36:07 UTC 2021 bootblock starting (log level: 7)...
|
|
FMAP: Found "FLASH" version 1.1 at 0x0.
|
|
FMAP: base = 0xffe00000 size = 0x200000 #areas = 3
|
|
FMAP: area COREBOOT found @ 200 (2096640 bytes)
|
|
CBFS: mcache @0x00014e00 built for 14 files, used 0x2b4 of 0x2000 bytes
|
|
CBFS: Found 'fallback/romstage' @0x80 size 0x412c in mcache @0x00014e2c
|
|
BS: bootblock times (exec / console): total (unknown) / 5 ms
|
|
|
|
|
|
coreboot-4.13-2450-gb77cf2299c Wed Mar 3 09:36:07 UTC 2021 romstage starting (log level: 7)...
|
|
QEMU: firmware config interface detected
|
|
Firmware config version id: 3
|
|
QEMU: firmware config: Found 'etc/e820'
|
|
CBMEM:
|
|
IMD: root @ 0x1ffff000 254 entries.
|
|
IMD: root @ 0x1fffec00 62 entries.
|
|
FMAP: area COREBOOT found @ 200 (2096640 bytes)
|
|
MTRR Range: Start=ffe00000 End=0 (Size 200000)
|
|
CBFS: Found 'fallback/postcar' @0x125c0 size 0x4444 in mcache @0x00014f78
|
|
Decompressing stage fallback/postcar @ 0x1ffd2fc0 (33936 bytes)
|
|
Loading module at 0x1ffd3000 with entry 0x1ffd3031. filesize: 0x4150 memsize: 0x8450
|
|
Processing 166 relocs. Offset value of 0x1dfd3000
|
|
BS: romstage times (exec / console): total (unknown) / 16 ms
|
|
|
|
|
|
coreboot-4.13-2450-gb77cf2299c Wed Mar 3 09:36:07 UTC 2021 postcar starting (log level: 7)...
|
|
FMAP: area COREBOOT found @ 200 (2096640 bytes)
|
|
CBFS: Found 'fallback/ramstage' @0x4240 size 0xcbb4 in mcache @0x1fffe9d0
|
|
Decompressing stage fallback/ramstage @ 0x1ffa9fc0 (161416 bytes)
|
|
Loading module at 0x1ffaa000 with entry 0x1ffaa000. filesize: 0x19a98 memsize: 0x27648
|
|
Processing 1602 relocs. Offset value of 0x1f1aa000
|
|
BS: postcar times (exec / console): total (unknown) / 6 ms
|
|
|
|
|
|
coreboot-4.13-2450-gb77cf2299c Wed Mar 3 09:36:07 UTC 2021 ramstage starting (log level: 7)...
|
|
Enumerating buses...
|
|
Root Device scanning...
|
|
CPU_CLUSTER: 0 enabled
|
|
DOMAIN: 0000 enabled
|
|
CPU_CLUSTER: 0 scanning...
|
|
QEMU: firmware config interface detected
|
|
Firmware config version id: 3
|
|
QEMU: max_cpus is 2
|
|
CPU: APIC: 00 enabled
|
|
CPU: APIC: 01 enabled
|
|
scan_bus: bus CPU_CLUSTER: 0 finished in 2 msecs
|
|
DOMAIN: 0000 scanning...
|
|
PCI: pci_scan_bus for bus 00
|
|
PCI: 00:00.0 [8086/1237] enabled
|
|
PCI: 00:01.0 [8086/7000] enabled
|
|
PCI: 00:01.1 [8086/7010] enabled
|
|
PCI: 00:01.3 [8086/7113] enabled
|
|
PCI: 00:02.0 [1234/1111] enabled
|
|
PCI: 00:01.0 scanning...
|
|
scan_bus: bus PCI: 00:01.0 finished in 0 msecs
|
|
PCI: 00:01.3 scanning...
|
|
scan_bus: bus PCI: 00:01.3 finished in 0 msecs
|
|
scan_bus: bus DOMAIN: 0000 finished in 10 msecs
|
|
scan_bus: bus Root Device finished in 16 msecs
|
|
done
|
|
BS: BS_DEV_ENUMERATE run times (exec / console): 1 / 17 ms
|
|
found VGA at PCI: 00:02.0
|
|
Setting up VGA for PCI: 00:02.0
|
|
Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000
|
|
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
|
|
Allocating resources...
|
|
Reading resources...
|
|
QEMU: firmware config: Found 'etc/e820'
|
|
QEMU: e820/res: 0xfeffc000 +0x00004000
|
|
QEMU: e820/ram: 0x00000000 + 0x20000000
|
|
QEMU: reserve ioports 0x0510-0x0511 [firmware-config]
|
|
QEMU: reserve ioports 0x5658-0x5658 [vmware-port]
|
|
QEMU: reserve ioports 0xae00-0xae0f [pci-hotplug]
|
|
QEMU: reserve ioports 0xaf00-0xaf1f [cpu-hotplug]
|
|
QEMU: reserve ioports 0xafe0-0xafe3 [piix4-gpe0]
|
|
Done reading resources.
|
|
==== Resource allocator: DOMAIN: 0000 - Pass 1 (gathering requirements) ===
|
|
=== Resource allocator: DOMAIN: 0000 - Pass 2 (allocating resources) ===
|
|
DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff
|
|
update_constraints: DOMAIN: 0000 0d base 00000510 limit 00000511 io (fixed)
|
|
update_constraints: DOMAIN: 0000 0e base 00005658 limit 00005658 io (fixed)
|
|
update_constraints: DOMAIN: 0000 0f base 0000ae00 limit 0000ae0f io (fixed)
|
|
update_constraints: DOMAIN: 0000 10 base 0000af00 limit 0000af1f io (fixed)
|
|
update_constraints: DOMAIN: 0000 11 base 0000afe0 limit 0000afe3 io (fixed)
|
|
update_constraints: PCI: 00:01.0 01 base 00000000 limit 00000fff io (fixed)
|
|
update_constraints: PCI: 00:01.3 01 base 0000e400 limit 0000e43f io (fixed)
|
|
update_constraints: PCI: 00:01.3 02 base 00000f00 limit 00000f0f io (fixed)
|
|
DOMAIN: 0000: Resource ranges:
|
|
* Base: 1000, Size: 4658, Tag: 100
|
|
* Base: 5659, Size: 57a7, Tag: 100
|
|
* Base: ae10, Size: f0, Tag: 100
|
|
* Base: af20, Size: c0, Tag: 100
|
|
* Base: afe4, Size: 341c, Tag: 100
|
|
* Base: e440, Size: 1bc0, Tag: 100
|
|
PCI: 00:01.1 20 * [0x1000 - 0x100f] limit: 100f io
|
|
DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff done
|
|
DOMAIN: 0000 mem: base: 0 size: 0 align: 0 gran: 0 limit: fffffffff
|
|
update_constraints: DOMAIN: 0000 0a base feffc000 limit feffffff mem (fixed)
|
|
update_constraints: DOMAIN: 0000 0b base 00000000 limit 0009ffff mem (fixed)
|
|
update_constraints: DOMAIN: 0000 0c base 000c0000 limit 1fffffff mem (fixed)
|
|
update_constraints: DOMAIN: 0000 12 base 000a0000 limit 000bffff mem (fixed)
|
|
update_constraints: DOMAIN: 0000 13 base 000c0000 limit 000fffff mem (fixed)
|
|
update_constraints: DOMAIN: 0000 02 base fec00000 limit fecfffff mem (fixed)
|
|
update_constraints: DOMAIN: 0000 03 base fee00000 limit fee0ffff mem (fixed)
|
|
update_constraints: PCI: 00:01.0 02 base ff800000 limit ffffffff mem (fixed)
|
|
DOMAIN: 0000: Resource ranges:
|
|
* Base: 20000000, Size: dec00000, Tag: 200
|
|
* Base: fed00000, Size: 100000, Tag: 200
|
|
* Base: fee10000, Size: 1ec000, Tag: 200
|
|
* Base: ff000000, Size: 800000, Tag: 200
|
|
* Base: 100000000, Size: f00000000, Tag: 100200
|
|
PCI: 00:02.0 10 * [0x20000000 - 0x20ffffff] limit: 20ffffff prefmem
|
|
PCI: 00:02.0 30 * [0x21000000 - 0x2100ffff] limit: 2100ffff mem
|
|
PCI: 00:02.0 18 * [0x21010000 - 0x21010fff] limit: 21010fff mem
|
|
DOMAIN: 0000 mem: base: 0 size: 0 align: 0 gran: 0 limit: fffffffff done
|
|
=== Resource allocator: DOMAIN: 0000 - resource allocation complete ===
|
|
PCI: 00:01.1 20 <- [0x0000001000 - 0x000000100f] size 0x00000010 gran 0x04 io
|
|
PCI: 00:02.0 10 <- [0x0020000000 - 0x0020ffffff] size 0x01000000 gran 0x18 prefmem
|
|
PCI: 00:02.0 18 <- [0x0021010000 - 0x0021010fff] size 0x00001000 gran 0x0c mem
|
|
PCI: 00:02.0 30 <- [0x0021000000 - 0x002100ffff] size 0x00010000 gran 0x10 romem
|
|
Done setting resources.
|
|
Done allocating resources.
|
|
BS: BS_DEV_RESOURCES run times (exec / console): 2 / 54 ms
|
|
Enabling resources...
|
|
PCI: 00:00.0 cmd <- 00
|
|
PCI: 00:01.0 cmd <- 00
|
|
PCI: 00:01.1 cmd <- 01
|
|
PCI: 00:01.3 cmd <- 00
|
|
PCI: 00:02.0 cmd <- 03
|
|
done.
|
|
BS: BS_DEV_ENABLE run times (exec / console): 1 / 2 ms
|
|
Initializing devices...
|
|
CPU_CLUSTER: 0 init
|
|
start_eip=0x00001000, code_size=0x00000031
|
|
Initializing CPU #0
|
|
CPU: vendor Intel device 663
|
|
CPU: family 06, model 06, stepping 03
|
|
Setting up local APIC...
|
|
apic_id: 0x00 done.
|
|
CPU #0 initialized
|
|
Initializing CPU #1
|
|
Waiting for 1 CPUS to stop
|
|
CPU: vendor Intel device 663
|
|
CPU: family 06, model 06, stepping 03
|
|
Setting up local APIC...
|
|
apic_id: 0x01 done.
|
|
CPU #1 initialized
|
|
All AP CPUs stopped (166 loops)
|
|
CPU_CLUSTER: 0 init finished in 17 msecs
|
|
PCI: 00:00.0 init
|
|
Assigning IRQ 10 to PCI: 00:01.3
|
|
PCI: 00:00.0 init finished in 3 msecs
|
|
PCI: 00:01.0 init
|
|
RTC Init
|
|
PCI: 00:01.0 init finished in 0 msecs
|
|
PCI: 00:01.1 init
|
|
IDE: Primary IDE interface: on
|
|
IDE: Secondary IDE interface: on
|
|
IDE: Access to legacy IDE ports: off
|
|
PCI: 00:01.1 init finished in 1 msecs
|
|
PCI: 00:02.0 init
|
|
PCI: 00:02.0 init finished in 29 msecs
|
|
Devices initialized
|
|
BS: BS_DEV_INIT run times (exec / console): 49 / 10 ms
|
|
Finalize devices...
|
|
Devices finalized
|
|
BS: BS_POST_DEVICE run times (exec / console): 0 / 1 ms
|
|
Copying Interrupt Routing Table to 0x000f0000... done.
|
|
Copying Interrupt Routing Table to 0x1ffa0000... done.
|
|
PIRQ table: 128 bytes.
|
|
QEMU: firmware config: Found 'etc/table-loader'
|
|
QEMU: found ACPI tables in fw_cfg.
|
|
QEMU: firmware config: Found 'etc/acpi/rsdp'
|
|
QEMU: loading "etc/acpi/rsdp" to 0x1ff7c000 (len 20)
|
|
QEMU: firmware config: Found 'etc/acpi/tables'
|
|
QEMU: loading "etc/acpi/tables" to 0x1ff7c040 (len 131072)
|
|
QEMU: loaded ACPI tables from fw_cfg.
|
|
Looking on 0x1ff7c000 for valid checksum
|
|
Checksum 1 passed
|
|
Checksum 2 passed all OK
|
|
ACPI: * SSDT
|
|
Found 2 CPU(s).
|
|
ACPI: added table 5/32, length now 56
|
|
ACPI tables: 131136 bytes.
|
|
smbios_write_tables: 1ff7b000
|
|
SMBIOS firmware version is set to coreboot_version: '4.13-2450-gb77cf2299c'
|
|
SMBIOS: Unknown CPU
|
|
DOMAIN: 0000 (QEMU Northbridge i440fx)
|
|
QEMU: firmware config: Found 'etc/smbios/smbios-tables'
|
|
QEMU: found smbios tables in fw_cfg (len 389).
|
|
QEMU: coreboot type0 table found at 0x1ff7b040.
|
|
QEMU: loading smbios tables to 0x1ff7b085
|
|
SMBIOS tables: 522 bytes.
|
|
Writing table forward entry at 0x00000500
|
|
Wrote coreboot table at: 0x00000500, 0x10 bytes, checksum cfe4
|
|
Writing coreboot table at 0x1ffa1000
|
|
0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
|
|
1. 0000000000001000-000000000009ffff: RAM
|
|
2. 00000000000a0000-00000000000fffff: RESERVED
|
|
3. 0000000000100000-000000001ff7afff: RAM
|
|
4. 000000001ff7b000-000000001ffa9fff: CONFIGURATION TABLES
|
|
5. 000000001ffaa000-000000001ffd1fff: RAMSTAGE
|
|
6. 000000001ffd2000-000000001fffffff: CONFIGURATION TABLES
|
|
7. 00000000ff800000-00000000ffffffff: RESERVED
|
|
FMAP: area COREBOOT found @ 200 (2096640 bytes)
|
|
Wrote coreboot table at: 0x1ffa1000, 0x2d4 bytes, checksum ec37
|
|
coreboot table: 748 bytes.
|
|
IMD ROOT 0. 0x1ffff000 0x00001000
|
|
IMD SMALL 1. 0x1fffe000 0x00001000
|
|
CONSOLE 2. 0x1ffde000 0x00020000
|
|
TIME STAMP 3. 0x1ffdd000 0x00000910
|
|
ROMSTG STCK 4. 0x1ffdc000 0x00001000
|
|
AFTER CAR 5. 0x1ffd2000 0x0000a000
|
|
RAMSTAGE 6. 0x1ffa9000 0x00029000
|
|
COREBOOT 7. 0x1ffa1000 0x00008000
|
|
IRQ TABLE 8. 0x1ffa0000 0x00001000
|
|
ACPI 9. 0x1ff7c000 0x00024000
|
|
SMBIOS 10. 0x1ff7b000 0x00000800
|
|
IMD small region:
|
|
IMD ROOT 0. 0x1fffec00 0x00000400
|
|
RO MCACHE 1. 0x1fffe940 0x000002b4
|
|
FMAP 2. 0x1fffe880 0x000000b6
|
|
BS: BS_WRITE_TABLES run times (exec / console): 7 / 34 ms
|
|
CBFS: Found 'fallback/payload' @0x16a40 size 0x110fe in mcache @0x1fffeae4
|
|
Checking segment from ROM address 0xffe16c6c
|
|
Payload being loaded at below 1MiB without region being marked as RAM usable.
|
|
Checking segment from ROM address 0xffe16c88
|
|
Loading segment from ROM address 0xffe16c6c
|
|
code (compression=1)
|
|
New segment dstaddr 0x000dfaa0 memsize 0x20560 srcaddr 0xffe16ca4 filesize 0x110c6
|
|
Loading Segment: addr: 0x000dfaa0 memsz: 0x0000000000020560 filesz: 0x00000000000110c6
|
|
using LZMA
|
|
Loading segment from ROM address 0xffe16c88
|
|
Entry Point 0x000fd266
|
|
BS: BS_PAYLOAD_LOAD run times (exec / console): 6 / 7 ms
|
|
Jumping to boot code at 0x000fd266(0x1ffa1000)
|
|
SeaBIOS (version rel-1.14.0-0-g155821a)
|
|
BUILD: gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2
|
|
Running on KVM
|
|
SeaBIOS (version rel-1.14.0-0-g155821a)
|
|
BUILD: gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2
|
|
Found coreboot cbmem console @ 1ffde000
|
|
Found mainboard Emulation QEMU x86 i440fx/piix4
|
|
Relocating init from 0x000e11e0 to 0x1ff2dc00 (size 54112)
|
|
Found CBFS header at 0xffe0022c
|
|
multiboot: eax=1ffc35a0, ebx=1ffc3564
|
|
Found 5 PCI devices (max PCI bus is 00)
|
|
Copying SMBIOS entry point from 0x1ff7b000 to 0x000f63e0
|
|
Copying ACPI RSDP from 0x1ff7c000 to 0x000f63c0
|
|
Copying PIR from 0x1ffa0000 to 0x000f6340
|
|
table(50434146)=0x1ff7d497 (via rsdt)
|
|
Using pmtimer, ioport 0xe408
|
|
Scan for VGA option rom
|
|
Running option rom at c000:0003
|
|
pmm call arg1=0
|
|
Turning on vga text mode console
|
|
SeaBIOS (version rel-1.14.0-0-g155821a)
|
|
ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9)
|
|
ATA controller 2 at 170/374/0 (irq 15 dev 9)
|
|
Searching bootorder for: HALT
|
|
Found 1 lpt ports
|
|
Found 1 serial ports
|
|
Searching bootorder for: /rom@img/kolibrios.img
|
|
DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD]
|
|
Searching bootorder for: /pci@i0cf8/*@1,1/drive@1/disk@0
|
|
Searching bios-geometry for: /pci@i0cf8/*@1,1/drive@1/disk@0
|
|
PS2 keyboard initialized
|
|
All threads complete.
|
|
Scan for option roms
|
|
|
|
Press ESC for boot menu.
|
|
|
|
Select boot device:
|
|
|
|
1. DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD]
|
|
2. Payload [kolibrios.img]
|
|
|
|
Searching bootorder for: HALT
|
|
Space available for UMB: ca000-ed000, f5c00-f62a0
|
|
Returned 262144 bytes of ZoneHigh
|
|
e820 map has 6 items:
|
|
0: 0000000000000000 - 000000000009fc00 = 1 RAM
|
|
1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
|
|
2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
|
|
3: 0000000000100000 - 000000001ff7b000 = 1 RAM
|
|
4: 000000001ff7b000 - 0000000020000000 = 2 RESERVED
|
|
5: 00000000ff800000 - 0000000100000000 = 2 RESERVED
|
|
enter handle_19:
|
|
NULL
|
|
Booting from CBFS...
|
|
Run img/kolibrios.img
|
|
No support for compression type 42494c4f
|
|
enter handle_18:
|
|
NULL
|
|
Booting from DVD/CD...
|
|
Device reports MEDIUM NOT PRESENT
|
|
Boot failed: Could not read from CDROM (code 0003)
|
|
enter handle_18:
|
|
NULL
|
|
Booting from Floppy...
|
|
Boot failed: could not read the boot disk
|
|
|
|
enter handle_18:
|
|
NULL
|
|
Booting from Hard Disk...
|
|
Boot failed: could not read the boot disk
|
|
|
|
enter handle_18:
|
|
NULL
|
|
No bootable device. Retrying in 60 seconds.
|