|
|
|
|
|
coreboot-4.5-1097-g610d1c6 Thu Mar 2 19:40:30 UTC 2017 romstage starting...
|
|
Initial stack pointer: 000dffc8
|
|
CPU APICID 00 start flag set
|
|
BSP Family_Model: 00600f12
|
|
*sysinfo range: [000c2d20,000cd28c]
|
|
bsp_apicid = 00
|
|
cpu_init_detectedx = 00000000
|
|
sb700 reset flags: 0020
|
|
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
|
|
CBFS: Locating 'microcode_amd.bin'
|
|
CBFS: Found @ offset 6be80 size 318c
|
|
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
|
|
CBFS: Locating 'microcode_amd_fam15h.bin'
|
|
CBFS: Found @ offset 2da40 size 1ec4
|
|
[microcode] patch id to apply = 0x0600063d
|
|
[microcode] updated to patch id = 0x0600063d success
|
|
cpuSetAMDMSR done
|
|
Enter amd_ht_init()
|
|
Forcing HT links to isochronous mode due to enabled IOMMU
|
|
Exit amd_ht_init()
|
|
amd_ht_fixup()
|
|
cpuSetAMDPCI 00 done
|
|
Prep FID/VID Node:00
|
|
F3x80: e20be281
|
|
F3x84: 01e200e2
|
|
F3xD4: c3312f21
|
|
F3xD8: 03000016
|
|
F3xDC: 05475634
|
|
core0 started:
|
|
sr5650_early_setup()
|
|
get_cpu_rev EAX=0x600f12.
|
|
CPU Rev is Fam 15.
|
|
NB Revision is A12.
|
|
fam10_optimization()
|
|
sr5650_por_init
|
|
Enabling IOMMU
|
|
sb700_early_setup()
|
|
sb700_devices_por_init()
|
|
sb700_devices_por_init(): SMBus Device, BDF:0-20-0
|
|
SMBus controller enabled, sb revision is A15
|
|
sb700_devices_por_init: Disabling ISA DMA support
|
|
sb700_devices_por_init(): IDE Device, BDF:0-20-1
|
|
sb700_devices_por_init(): LPC Device, BDF:0-20-3
|
|
sb700_devices_por_init(): P2P Bridge, BDF:0-20-4
|
|
sb700_devices_por_init(): SATA Device, BDF:0-17-0
|
|
sb700_pmio_por_init()
|
|
start_other_cores()
|
|
init node: 00 cores: 05 pass 1
|
|
Start other core - nodeid: 00 cores: 05
|
|
get_boot_apic_id: using 2 as APIC ID for node 0, core 2
|
|
get_boot_apic_id: using 4 as APIC ID for node 0, core 4
|
|
started ap apicid: get_boot_apic_id: using 1 as APIC ID for node 0, core 1
|
|
* AP 01started
|
|
get_boot_apic_id: using 2 as APIC ID for node 0, core 2
|
|
* AP 02started
|
|
get_boot_apic_id: using 3 as APIC ID for node 0, core 3
|
|
* AP 03started
|
|
get_boot_apic_id: using 4 as APIC ID for node 0, core 4
|
|
* AP 04started
|
|
get_boot_apic_id: using 5 as APIC ID for node 0, core 5
|
|
* AP 05started
|
|
|
|
|
|
Begin FIDVID MSR 0xc0010071 0x5aca009e 0x3806684c
|
|
FIDVID on BSP, APIC_id: 00
|
|
BSP fid = 0
|
|
get_boot_apic_id: using 0 as APIC ID for node 0, core 0
|
|
get_boot_apic_id: using 1 as APIC ID for node 0, core 1
|
|
get_boot_apic_id: using 2 as APIC ID for node 0, core 2
|
|
get_boot_apic_id: using 3 as APIC ID for node 0, core 3
|
|
get_boot_apic_id: using 4 as APIC ID for node 0, core 4
|
|
get_boot_apic_id: using 5 as APIC ID for node 0, core 5
|
|
Wait for AP stage 1: ap_apicid = 1
|
|
readback = 1000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 2
|
|
readback = 2000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 3
|
|
readback = 3000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 4
|
|
readback = 4000014
|
|
common_fid(packed) = 0
|
|
Wait for AP stage 1: ap_apicid = 5
|
|
readback = 5000014
|
|
common_fid(packed) = 0
|
|
common_fid = 0
|
|
End FIDVIDMSR 0xc0010071 0x5aca009e 0x3806684c
|
|
sr5650_htinit: Node 0 Link 2, HT freq=e.
|
|
sr5650_htinit: HT3 mode
|
|
...WARM RESET...
|
|
|
|
|
|
|
|
|
|
coreboot-4.5-1097-g610d1c6 Thu Mar 2 19:40:30 UTC 2017 romstage starting...
|
|
Initial stack pointer: 000dffc8
|
|
CPU APICID 00 start flag set
|
|
BSP Family_Model: 00600f12
|
|
*sysinfo range: [000c2d20,000cd28c]
|
|
bsp_apicid = 00
|
|
cpu_init_detectedx = 00000000
|
|
sb700 reset flags: 0004
|
|
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
|
|
CBFS: Locating 'microcode_amd.bin'
|
|
CBFS: Found @ offset 6be80 size 318c
|
|
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
|
|
CBFS: Locating 'microcode_amd_fam15h.bin'
|
|
CBFS: Found @ offset 2da40 size 1ec4
|
|
[microcode] patch id to apply = 0x0600063d
|
|
[microcode] updated to patch id = 0x0600063d success
|
|
cpuSetAMDMSR done
|
|
Enter amd_ht_init()
|
|
Forcing HT links to isochronous mode due to enabled IOMMU
|
|
Exit amd_ht_init()
|
|
amd_ht_fixup()
|
|
cpuSetAMDPCI 00 done
|
|
Prep FID/VID Node:00
|
|
F3x80: e20be281
|
|
F3x84: 01e200e2
|
|
F3xD4: c3312f21
|
|
F3xD8: 03000016
|
|
F3xDC: 05475634
|
|
core0 started:
|
|
sr5650_early_setup()
|
|
get_cpu_rev EAX=0x600f12.
|
|
CPU Rev is Fam 15.
|
|
NB Revision is A12.
|
|
fam10_optimization()
|
|
sr5650_por_init
|
|
Enabling IOMMU
|
|
sb700_early_setup()
|
|
sb700_devices_por_init()
|
|
sb700_devices_por_init(): SMBus Device, BDF:0-20-0
|
|
SMBus controller enabled, sb revision is A15
|
|
sb700_devices_por_init: Disabling ISA DMA support
|
|
sb700_devices_por_init(): IDE Device, BDF:0-20-1
|
|
sb700_devices_por_init(): LPC Device, BDF:0-20-3
|
|
sb700_devices_por_init(): P2P Bridge, BDF:0-20-4
|
|
sb700_devices_por_init(): SATA Device, BDF:0-17-0
|
|
sb700_pmio_por_init()
|
|
start_other_cores()
|
|
init node: 00 cores: 05 pass 1
|
|
Start other core - nodeid: 00 cores: 05
|
|
get_boot_apic_id: using 2 as APIC ID for node 0, core 2
|
|
get_boot_apic_id: using 4 as APIC ID for node 0, core 4
|
|
started ap apicid: get_boot_apic_id: using 1 as APIC ID for node 0, core 1
|
|
* AP 01started
|
|
get_boot_apic_id: using 2 as APIC ID for node 0, core 2
|
|
* AP 02started
|
|
get_boot_apic_id: using 3 as APIC ID for node 0, core 3
|
|
* AP 03started
|
|
get_boot_apic_id: using 4 as APIC ID for node 0, core 4
|
|
* AP 04started
|
|
get_boot_apic_id: using 5 as APIC ID for node 0, core 5
|
|
* AP 05started
|
|
|
|
|
|
Begin FIDVID MSR 0xc0010071 0x5aca009e 0x3806344c
|
|
End FIDVIDMSR 0xc0010071 0x5aca009e 0x38023411
|
|
sr5650_htinit: Node 0 Link 2, HT freq=e.
|
|
sr5650_htinit: HT3 mode
|
|
...WARM RESET...
|
|
|
|
|
|
|
|
|
|
coreboot-4.5-1097-g610d1c6 Thu Mar 2 19:40:30 UTC 2017 romstage starting...
|
|
Initial stack pointer: 000dffc8
|
|
CPU APICID 00 start flag set
|
|
BSP Family_Model: 00600f12
|
|
*sysinfo range: [000c2d20,000cd28c]
|
|
bsp_apicid = 00
|
|
cpu_init_detectedx = 00000000
|
|
sb700 reset flags: 0004
|
|
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
|
|
CBFS: Locating 'microcode_amd.bin'
|
|
CBFS: Found @ offset 6be80 size 318c
|
|
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
|
|
CBFS: Locating 'microcode_amd_fam15h.bin'
|
|
CBFS: Found @ offset 2da40 size 1ec4
|
|
[microcode] patch id to apply = 0x0600063d
|
|
[microcode] updated to patch id = 0x0600063d success
|
|
cpuSetAMDMSR done
|
|
Enter amd_ht_init()
|
|
Forcing HT links to isochronous mode due to enabled IOMMU
|
|
Exit amd_ht_init()
|
|
amd_ht_fixup()
|
|
cpuSetAMDPCI 00 done
|
|
Prep FID/VID Node:00
|
|
F3x80: e20be281
|
|
F3x84: 01e200e2
|
|
F3xD4: c3312f21
|
|
F3xD8: 03000016
|
|
F3xDC: 05475634
|
|
core0 started:
|
|
sr5650_early_setup()
|
|
get_cpu_rev EAX=0x600f12.
|
|
CPU Rev is Fam 15.
|
|
NB Revision is A12.
|
|
fam10_optimization()
|
|
sr5650_por_init
|
|
Enabling IOMMU
|
|
sb700_early_setup()
|
|
sb700_devices_por_init()
|
|
sb700_devices_por_init(): SMBus Device, BDF:0-20-0
|
|
SMBus controller enabled, sb revision is A15
|
|
sb700_devices_por_init: Disabling ISA DMA support
|
|
sb700_devices_por_init(): IDE Device, BDF:0-20-1
|
|
sb700_devices_por_init(): LPC Device, BDF:0-20-3
|
|
sb700_devices_por_init(): P2P Bridge, BDF:0-20-4
|
|
sb700_devices_por_init(): SATA Device, BDF:0-17-0
|
|
sb700_pmio_por_init()
|
|
start_other_cores()
|
|
init node: 00 cores: 05 pass 1
|
|
Start other core - nodeid: 00 cores: 05
|
|
get_boot_apic_id: using 2 as APIC ID for node 0, core 2
|
|
get_boot_apic_id: using 4 as APIC ID for node 0, core 4
|
|
started ap apicid: get_boot_apic_id: using 1 as APIC ID for node 0, core 1
|
|
* AP 01started
|
|
get_boot_apic_id: using 2 as APIC ID for node 0, core 2
|
|
* AP 02started
|
|
get_boot_apic_id: using 3 as APIC ID for node 0, core 3
|
|
* AP 03started
|
|
get_boot_apic_id: using 4 as APIC ID for node 0, core 4
|
|
* AP 04started
|
|
get_boot_apic_id: using 5 as APIC ID for node 0, core 5
|
|
* AP 05started
|
|
|
|
|
|
Begin FIDVID MSR 0xc0010071 0x5aca009e 0x38023411
|
|
End FIDVIDMSR 0xc0010071 0x5aca009e 0x38023411
|
|
sr5650_htinit: Node 0 Link 2, HT freq=e.
|
|
sr5650_htinit: HT3 mode
|
|
Node 00 DIMM voltage set to index 00
|
|
Node 01 DIMM voltage set to index 00
|
|
stopped ap apicid: get_boot_apic_id: using 1 as APIC ID for node 0, core 1
|
|
* AP 01stopped
|
|
get_boot_apic_id: using 2 as APIC ID for node 0, core 2
|
|
* AP 02stopped
|
|
get_boot_apic_id: using 3 as APIC ID for node 0, core 3
|
|
* AP 03stopped
|
|
get_boot_apic_id: using 4 as APIC ID for node 0, core 4
|
|
* AP 04stopped
|
|
get_boot_apic_id: using 5 as APIC ID for node 0, core 5
|
|
* AP 05stopped
|
|
|
|
fill_mem_ctrl() detected 1 nodes
|
|
raminit_amdmct()
|
|
raminit_amdmct begin:
|
|
mctAutoInitMCT_D: mct_init Node 0
|
|
mctAutoInitMCT_D: mct_InitialMCT_D
|
|
mct_InitialMCT_D: mct_ForceNBPState0_En_Fam15
|
|
mctAutoInitMCT_D: mctSMBhub_Init
|
|
activate_spd_rom() for node 00
|
|
enable_spd_node0()
|
|
mctAutoInitMCT_D: mct_preInitDCT
|
|
DIMMPresence: DIMMValid=4
|
|
DIMMPresence: DIMMPresent=4
|
|
DIMMPresence: RegDIMMPresent=4
|
|
DIMMPresence: LRDIMMPresent=0
|
|
DIMMPresence: DimmECCPresent=4
|
|
DIMMPresence: DimmPARPresent=0
|
|
DIMMPresence: Dimmx4Present=4
|
|
DIMMPresence: Dimmx8Present=0
|
|
DIMMPresence: Dimmx16Present=0
|
|
DIMMPresence: DimmPlPresent=0
|
|
DIMMPresence: DimmDRPresent=4
|
|
DIMMPresence: DimmQRPresent=0
|
|
DIMMPresence: DATAload[0]=2
|
|
DIMMPresence: MAload[0]=20
|
|
DIMMPresence: MAdimms[0]=1
|
|
DIMMPresence: DATAload[1]=0
|
|
DIMMPresence: MAload[1]=0
|
|
DIMMPresence: MAdimms[1]=0
|
|
DIMMPresence: Status 2005
|
|
DIMMPresence: ErrStatus 0
|
|
DIMMPresence: ErrCode 0
|
|
DIMMPresence: Done
|
|
|
|
DCTPreInit_D: mct_DIMMPresence Done
|
|
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
|
|
CBFS: Locating 's3nv'
|
|
CBFS: Found @ offset 2fec0 size 10000
|
|
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
|
|
CBFS: Locating 's3nv'
|
|
CBFS: Found @ offset 2fec0 size 10000
|
|
mctAutoInitMCT_D: mct_init Node 1
|
|
mctAutoInitMCT_D: mct_init Node 2
|
|
mctAutoInitMCT_D: mct_init Node 3
|
|
mctAutoInitMCT_D: mct_init Node 4
|
|
mctAutoInitMCT_D: mct_init Node 5
|
|
mctAutoInitMCT_D: mct_init Node 6
|
|
mctAutoInitMCT_D: mct_init Node 7
|
|
mctAutoInitMCT_D: DIMMSetVoltage
|
|
Node 00 DIMM voltage set to index 01
|
|
mctAutoInitMCT_D: mctSMBhub_Init
|
|
activate_spd_rom() for node 00
|
|
enable_spd_node0()
|
|
mctAutoInitMCT_D: mct_initDCT
|
|
SPDCalcWidth: Status 2005
|
|
SPDCalcWidth: ErrStatus 0
|
|
SPDCalcWidth: ErrCode 0
|
|
SPDCalcWidth: Done
|
|
DCTInit_D: mct_SPDCalcWidth Done
|
|
AutoCycTiming_D: Start
|
|
mct_MaxLoadFreq: 1 registered DIMM on 1350mV channel; limiting to DDR3-1600
|
|
GetPresetmaxF_D: Start
|
|
GetPresetmaxF_D: Done
|
|
SPDGetTCL_D: Start
|
|
SPDGetTCL_D: DIMMCASL 5
|
|
SPDGetTCL_D: DIMMAutoSpeed 4
|
|
SPDGetTCL_D: Status 2005
|
|
SPDGetTCL_D: ErrStatus 0
|
|
SPDGetTCL_D: ErrCode 0
|
|
SPDGetTCL_D: Done
|
|
|
|
SPD2ndTiming: Start
|
|
SPD2ndTiming: Done
|
|
AutoCycTiming: Status 2005
|
|
AutoCycTiming: ErrStatus 0
|
|
AutoCycTiming: ErrCode 0
|
|
AutoCycTiming: Done
|
|
|
|
DCTInit_D: AutoCycTiming_D Done
|
|
SPDSetBanks: CSPresent c
|
|
SPDSetBanks: Status 2005
|
|
SPDSetBanks: ErrStatus 0
|
|
SPDSetBanks: ErrCode 0
|
|
SPDSetBanks: Done
|
|
|
|
AfterStitch pDCTstat->NodeSysBase = 0
|
|
mct_AfterStitchMemory: pDCTstat->NodeSysLimit = 3ffffff
|
|
StitchMemory: Status 2005
|
|
StitchMemory: ErrStatus 0
|
|
StitchMemory: ErrCode 0
|
|
StitchMemory: Done
|
|
|
|
InterleaveBanks_D: Status 2005
|
|
InterleaveBanks_D: ErrStatus 0
|
|
InterleaveBanks_D: ErrCode 0
|
|
InterleaveBanks_D: Done
|
|
|
|
AutoConfig_D: DramControl: 00002a06
|
|
AutoConfig_D: DramTimingLo: 00000000
|
|
AutoConfig_D: DramConfigMisc: 00000000
|
|
AutoConfig_D: DramConfigMisc2: 00000000
|
|
AutoConfig_D: DramConfigLo: 03082000
|
|
AutoConfig_D: DramConfigHi: 0f090084
|
|
InitDDRPhy: Start
|
|
InitDDRPhy: Done
|
|
mct_SetDramConfigHi_D: Start
|
|
set_2t_configuration: Start
|
|
set_2t_configuration: Done
|
|
mct_BeforePlatformSpec: Start
|
|
mct_BeforePlatformSpec: Done
|
|
mct_PlatformSpec: Start
|
|
Programmed DCT 0 timing/termination pattern 00000000 00112222
|
|
mct_PlatformSpec: Done
|
|
mct_SetDramConfigHi_D: DramConfigHi: 0f090084
|
|
*
|
|
mct_SetDramConfigHi_D: Done
|
|
mct_EarlyArbEn_D: Start
|
|
mct_EarlyArbEn_D: Done
|
|
AutoConfig: Status 2005
|
|
AutoConfig: ErrStatus 0
|
|
AutoConfig: ErrCode 0
|
|
AutoConfig: Done
|
|
|
|
DCTInit_D: AutoConfig_D Done
|
|
DCTInit_D: PlatformSpec_D Done
|
|
DCTFinalInit_D: StartupDCT_D Start
|
|
mct_BeforeDramInit_Prod_D: Start
|
|
mct_ProgramODT_D: Start
|
|
Programmed DCT 0 ODT pattern 00000000 00000000 00000000 08020000
|
|
mct_ProgramODT_D: Done
|
|
mct_BeforeDramInit_Prod_D: Done
|
|
mct_DramInit_Sw_D: Start
|
|
mct_DCTAccessDone: Start
|
|
mct_DCTAccessDone: Done
|
|
mct_DramControlReg_Init_D: Start
|
|
mct_DramControlReg_Init_D: F2xA8: 00000c00
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC0: 02
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC1: 00
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 1
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC2: 04
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC3: 05
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC4: 05
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC5: 05
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC6: 00
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC7: 00
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 1
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC8: 00
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC9: 0d
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC10: 00
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC11: 01
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC12: 00
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC13: 00
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC14: 00
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC15: 00
|
|
mct_DramControlReg_Init_D: Done
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR3 control word 004c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR0 control word 00401318
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR3 control word 006c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR0 control word 00601318
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_SendZQCmd: Start
|
|
mct_SendZQCmd: Done
|
|
mct_SendZQCmd: Start
|
|
mct_SendZQCmd: Done
|
|
mct_DCTAccessDone: Start
|
|
mct_DCTAccessDone: Done
|
|
mct_DramInit_Sw_D: Done
|
|
DCTFinalInit_D: StartupDCT_D Done
|
|
mctAutoInitMCT_D: SyncDCTsReady_D
|
|
mctAutoInitMCT_D: HTMemMapInit_D
|
|
Node: 00 base: 00 limit: 3ffffff BottomIO: c00000
|
|
Node: 00 base: 03 limit: 43fffff
|
|
Node: 01 base: 00 limit: 00
|
|
Node: 02 base: 00 limit: 00
|
|
Node: 03 base: 00 limit: 00
|
|
Node: 04 base: 00 limit: 00
|
|
Node: 05 base: 00 limit: 00
|
|
Node: 06 base: 00 limit: 00
|
|
Node: 07 base: 00 limit: 00
|
|
mctAutoInitMCT_D: mctHookAfterCPU
|
|
mctAutoInitMCT_D: DQSTiming_D
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: done training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
activate_spd_rom() for node 00
|
|
enable_spd_node0()
|
|
AgesaHwWlPhase1: training nibble 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
DIMM 1 RttWr: 0
|
|
Programmed DCT 0 write levelling ODT pattern 00000002 from DIMM 1 data
|
|
Lane 00 initial seed: 003e
|
|
Lane 01 initial seed: 003e
|
|
Lane 02 initial seed: 003e
|
|
Lane 03 initial seed: 003e
|
|
Lane 04 initial seed: 003e
|
|
Lane 05 initial seed: 003e
|
|
Lane 06 initial seed: 003e
|
|
Lane 07 initial seed: 003e
|
|
Lane 08 initial seed: 003e
|
|
Lane 00 nibble 0 raw readback: 0041
|
|
Lane 00 nibble 0 adjusted value (pre nibble): 0041
|
|
Lane 00 nibble 0 adjusted value (post nibble): 0041
|
|
Lane 01 nibble 0 raw readback: 003f
|
|
Lane 01 nibble 0 adjusted value (pre nibble): 003f
|
|
Lane 01 nibble 0 adjusted value (post nibble): 003f
|
|
Lane 02 nibble 0 raw readback: 003b
|
|
Lane 02 nibble 0 adjusted value (pre nibble): 003b
|
|
Lane 02 nibble 0 adjusted value (post nibble): 003b
|
|
Lane 03 nibble 0 raw readback: 0037
|
|
Lane 03 nibble 0 adjusted value (pre nibble): 0037
|
|
Lane 03 nibble 0 adjusted value (post nibble): 0037
|
|
Lane 04 nibble 0 raw readback: 0035
|
|
Lane 04 nibble 0 adjusted value (pre nibble): 0035
|
|
Lane 04 nibble 0 adjusted value (post nibble): 0035
|
|
Lane 05 nibble 0 raw readback: 003a
|
|
Lane 05 nibble 0 adjusted value (pre nibble): 003a
|
|
Lane 05 nibble 0 adjusted value (post nibble): 003a
|
|
Lane 06 nibble 0 raw readback: 0040
|
|
Lane 06 nibble 0 adjusted value (pre nibble): 0040
|
|
Lane 06 nibble 0 adjusted value (post nibble): 0040
|
|
Lane 07 nibble 0 raw readback: 0043
|
|
Lane 07 nibble 0 adjusted value (pre nibble): 0043
|
|
Lane 07 nibble 0 adjusted value (post nibble): 0043
|
|
Lane 08 nibble 0 raw readback: 0031
|
|
Lane 08 nibble 0 adjusted value (pre nibble): 0031
|
|
Lane 08 nibble 0 adjusted value (post nibble): 0031
|
|
original critical gross delay: 0
|
|
new critical gross delay: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
DIMM 1 RttWr: 0
|
|
fam15_receiver_enable_training_seed: using seed: 003f
|
|
fam15_receiver_enable_training_seed: using seed: 003f
|
|
TrainRcvrEn: Status 2205
|
|
TrainRcvrEn: ErrStatus 0
|
|
TrainRcvrEn: ErrCode 0
|
|
TrainRcvrEn: Done
|
|
|
|
activate_spd_rom() for node 00
|
|
enable_spd_node0()
|
|
SetTargetFreq: Start
|
|
SetTargetFreq: Node 0: New frequency code: 0006
|
|
ChangeMemClk: Start
|
|
set_2t_configuration: Start
|
|
set_2t_configuration: Done
|
|
mct_BeforePlatformSpec: Start
|
|
mct_BeforePlatformSpec: Done
|
|
mct_PlatformSpec: Start
|
|
Programmed DCT 0 timing/termination pattern 00000000 10112222
|
|
mct_PlatformSpec: Done
|
|
ChangeMemClk: Done
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: done training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
Preparing to send DCT 0 DIMM 1 RC10: 00 (F2xA8: 00000c00)
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 1
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC2: 04
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 1
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC8: 00
|
|
SetTargetFreq: Done
|
|
SPD2ndTiming: Start
|
|
SPD2ndTiming: Done
|
|
mct_BeforeDramInit_Prod_D: Start
|
|
mct_ProgramODT_D: Start
|
|
Programmed DCT 0 ODT pattern 00000000 00000000 00000000 08020000
|
|
mct_ProgramODT_D: Done
|
|
mct_BeforeDramInit_Prod_D: Done
|
|
mct_DramInit_Sw_D: Start
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR3 control word 004c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR0 control word 00401558
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR3 control word 006c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR0 control word 00601558
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_DramInit_Sw_D: Done
|
|
AgesaHwWlPhase1: training nibble 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
DIMM 1 RttWr: 0
|
|
Programmed DCT 0 write levelling ODT pattern 00000002 from DIMM 1 data
|
|
Lane 00 scaled delay: 0044
|
|
Lane 00 new seed: 0044
|
|
Lane 01 scaled delay: 0044
|
|
Lane 01 new seed: 0044
|
|
Lane 02 scaled delay: 0044
|
|
Lane 02 new seed: 0044
|
|
Lane 03 scaled delay: 0044
|
|
Lane 03 new seed: 0044
|
|
Lane 04 scaled delay: 0044
|
|
Lane 04 new seed: 0044
|
|
Lane 05 scaled delay: 0044
|
|
Lane 05 new seed: 0044
|
|
Lane 06 scaled delay: 0044
|
|
Lane 06 new seed: 0044
|
|
Lane 07 scaled delay: 0044
|
|
Lane 07 new seed: 0044
|
|
Lane 08 scaled delay: 0044
|
|
Lane 08 new seed: 0044
|
|
Lane 00 nibble 0 raw readback: 0047
|
|
Lane 00 nibble 0 adjusted value (pre nibble): 0047
|
|
Lane 00 nibble 0 adjusted value (post nibble): 0047
|
|
Lane 01 nibble 0 raw readback: 0045
|
|
Lane 01 nibble 0 adjusted value (pre nibble): 0045
|
|
Lane 01 nibble 0 adjusted value (post nibble): 0045
|
|
Lane 02 nibble 0 raw readback: 0040
|
|
Lane 02 nibble 0 adjusted value (pre nibble): 0040
|
|
Lane 02 nibble 0 adjusted value (post nibble): 0040
|
|
Lane 03 nibble 0 raw readback: 003b
|
|
Lane 03 nibble 0 adjusted value (pre nibble): 003b
|
|
Lane 03 nibble 0 adjusted value (post nibble): 003b
|
|
Lane 04 nibble 0 raw readback: 0038
|
|
Lane 04 nibble 0 adjusted value (pre nibble): 0038
|
|
Lane 04 nibble 0 adjusted value (post nibble): 0038
|
|
Lane 05 nibble 0 raw readback: 003e
|
|
Lane 05 nibble 0 adjusted value (pre nibble): 003e
|
|
Lane 05 nibble 0 adjusted value (post nibble): 003e
|
|
Lane 06 nibble 0 raw readback: 0046
|
|
Lane 06 nibble 0 adjusted value (pre nibble): 0046
|
|
Lane 06 nibble 0 adjusted value (post nibble): 0046
|
|
Lane 07 nibble 0 raw readback: 0049
|
|
Lane 07 nibble 0 adjusted value (pre nibble): 0049
|
|
Lane 07 nibble 0 adjusted value (post nibble): 0049
|
|
Lane 08 nibble 0 raw readback: 0034
|
|
Lane 08 nibble 0 adjusted value (pre nibble): 0034
|
|
Lane 08 nibble 0 adjusted value (post nibble): 0034
|
|
original critical gross delay: 0
|
|
new critical gross delay: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
DIMM 1 RttWr: 0
|
|
SetTargetFreq: Start
|
|
SetTargetFreq: Node 0: New frequency code: 000a
|
|
ChangeMemClk: Start
|
|
set_2t_configuration: Start
|
|
set_2t_configuration: Done
|
|
mct_BeforePlatformSpec: Start
|
|
mct_BeforePlatformSpec: Done
|
|
mct_PlatformSpec: Start
|
|
Programmed DCT 0 timing/termination pattern 00393c39 20112222
|
|
mct_PlatformSpec: Done
|
|
ChangeMemClk: Done
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: done training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
Preparing to send DCT 0 DIMM 1 RC10: 01 (F2xA8: 00000c00)
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 0
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC2: 00
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 0
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC8: 00
|
|
SetTargetFreq: Done
|
|
SPD2ndTiming: Start
|
|
SPD2ndTiming: Done
|
|
mct_BeforeDramInit_Prod_D: Start
|
|
mct_ProgramODT_D: Start
|
|
Programmed DCT 0 ODT pattern 00000000 00000000 00000000 08020000
|
|
mct_ProgramODT_D: Done
|
|
mct_BeforeDramInit_Prod_D: Done
|
|
mct_DramInit_Sw_D: Start
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480088
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR3 control word 004c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR0 control word 00401958
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680088
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR3 control word 006c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR0 control word 00601958
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_DramInit_Sw_D: Done
|
|
AgesaHwWlPhase1: training nibble 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480088
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680088
|
|
DIMM 1 RttWr: 0
|
|
Programmed DCT 0 write levelling ODT pattern 00000002 from DIMM 1 data
|
|
Lane 00 scaled delay: 0053
|
|
Lane 00 new seed: 0053
|
|
Lane 01 scaled delay: 0051
|
|
Lane 01 new seed: 0051
|
|
Lane 02 scaled delay: 004a
|
|
Lane 02 new seed: 004a
|
|
Lane 03 scaled delay: 0043
|
|
Lane 03 new seed: 0043
|
|
Lane 04 scaled delay: 003f
|
|
Lane 04 new seed: 003f
|
|
Lane 05 scaled delay: 0047
|
|
Lane 05 new seed: 0047
|
|
Lane 06 scaled delay: 0052
|
|
Lane 06 new seed: 0052
|
|
Lane 07 scaled delay: 0056
|
|
Lane 07 new seed: 0056
|
|
Lane 08 scaled delay: 003a
|
|
Lane 08 new seed: 003a
|
|
Lane 00 nibble 0 raw readback: 0056
|
|
Lane 00 nibble 0 adjusted value (pre nibble): 0056
|
|
Lane 00 nibble 0 adjusted value (post nibble): 0056
|
|
Lane 01 nibble 0 raw readback: 0053
|
|
Lane 01 nibble 0 adjusted value (pre nibble): 0053
|
|
Lane 01 nibble 0 adjusted value (post nibble): 0053
|
|
Lane 02 nibble 0 raw readback: 004b
|
|
Lane 02 nibble 0 adjusted value (pre nibble): 004b
|
|
Lane 02 nibble 0 adjusted value (post nibble): 004b
|
|
Lane 03 nibble 0 raw readback: 0045
|
|
Lane 03 nibble 0 adjusted value (pre nibble): 0045
|
|
Lane 03 nibble 0 adjusted value (post nibble): 0045
|
|
Lane 04 nibble 0 raw readback: 0041
|
|
Lane 04 nibble 0 adjusted value (pre nibble): 0041
|
|
Lane 04 nibble 0 adjusted value (post nibble): 0041
|
|
Lane 05 nibble 0 raw readback: 004a
|
|
Lane 05 nibble 0 adjusted value (pre nibble): 004a
|
|
Lane 05 nibble 0 adjusted value (post nibble): 004a
|
|
Lane 06 nibble 0 raw readback: 0054
|
|
Lane 06 nibble 0 adjusted value (pre nibble): 0054
|
|
Lane 06 nibble 0 adjusted value (post nibble): 0054
|
|
Lane 07 nibble 0 raw readback: 0058
|
|
Lane 07 nibble 0 adjusted value (pre nibble): 0058
|
|
Lane 07 nibble 0 adjusted value (post nibble): 0058
|
|
Lane 08 nibble 0 raw readback: 003b
|
|
Lane 08 nibble 0 adjusted value (pre nibble): 003b
|
|
Lane 08 nibble 0 adjusted value (post nibble): 003b
|
|
original critical gross delay: 0
|
|
new critical gross delay: 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480088
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680088
|
|
DIMM 1 RttWr: 0
|
|
SetTargetFreq: Start
|
|
SetTargetFreq: Node 0: New frequency code: 000e
|
|
ChangeMemClk: Start
|
|
set_2t_configuration: Start
|
|
set_2t_configuration: Done
|
|
mct_BeforePlatformSpec: Start
|
|
mct_BeforePlatformSpec: Done
|
|
mct_PlatformSpec: Start
|
|
Programmed DCT 0 timing/termination pattern 00373a37 30112222
|
|
mct_PlatformSpec: Done
|
|
ChangeMemClk: Done
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: done training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
Preparing to send DCT 0 DIMM 1 RC10: 02 (F2xA8: 00000c00)
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 0
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC2: 00
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 0
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC8: 00
|
|
SetTargetFreq: Done
|
|
SPD2ndTiming: Start
|
|
SPD2ndTiming: Done
|
|
mct_BeforeDramInit_Prod_D: Start
|
|
mct_ProgramODT_D: Start
|
|
Programmed DCT 0 ODT pattern 00000000 00000000 00000000 08020000
|
|
mct_ProgramODT_D: Done
|
|
mct_BeforeDramInit_Prod_D: Done
|
|
mct_DramInit_Sw_D: Start
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480490
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR3 control word 004c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR0 control word 00401b58
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680490
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR3 control word 006c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR0 control word 00601b58
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_DramInit_Sw_D: Done
|
|
AgesaHwWlPhase1: training nibble 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480490
|
|
DIMM 1 RttWr: 2
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680490
|
|
DIMM 1 RttWr: 2
|
|
Programmed DCT 0 write levelling ODT pattern 00000002 from DIMM 1 data
|
|
Lane 00 scaled delay: 0063
|
|
Lane 00 new seed: 0063
|
|
Lane 01 scaled delay: 005f
|
|
Lane 01 new seed: 005f
|
|
Lane 02 scaled delay: 0055
|
|
Lane 02 new seed: 0055
|
|
Lane 03 scaled delay: 004e
|
|
Lane 03 new seed: 004e
|
|
Lane 04 scaled delay: 0049
|
|
Lane 04 new seed: 0049
|
|
Lane 05 scaled delay: 0054
|
|
Lane 05 new seed: 0054
|
|
Lane 06 scaled delay: 0061
|
|
Lane 06 new seed: 0061
|
|
Lane 07 scaled delay: 0066
|
|
Lane 07 new seed: 0066
|
|
Lane 08 scaled delay: 0041
|
|
Lane 08 new seed: 0041
|
|
Lane 00 nibble 0 raw readback: 0023
|
|
Lane 00 nibble 0 adjusted value (pre nibble): 0063
|
|
Lane 00 nibble 0 adjusted value (post nibble): 0063
|
|
Lane 01 nibble 0 raw readback: 005e
|
|
Lane 01 nibble 0 adjusted value (pre nibble): 005e
|
|
Lane 01 nibble 0 adjusted value (post nibble): 005e
|
|
Lane 02 nibble 0 raw readback: 0056
|
|
Lane 02 nibble 0 adjusted value (pre nibble): 0056
|
|
Lane 02 nibble 0 adjusted value (post nibble): 0056
|
|
Lane 03 nibble 0 raw readback: 004e
|
|
Lane 03 nibble 0 adjusted value (pre nibble): 004e
|
|
Lane 03 nibble 0 adjusted value (post nibble): 004e
|
|
Lane 04 nibble 0 raw readback: 0049
|
|
Lane 04 nibble 0 adjusted value (pre nibble): 0049
|
|
Lane 04 nibble 0 adjusted value (post nibble): 0049
|
|
Lane 05 nibble 0 raw readback: 0054
|
|
Lane 05 nibble 0 adjusted value (pre nibble): 0054
|
|
Lane 05 nibble 0 adjusted value (post nibble): 0054
|
|
Lane 06 nibble 0 raw readback: 0020
|
|
Lane 06 nibble 0 adjusted value (pre nibble): 0060
|
|
Lane 06 nibble 0 adjusted value (post nibble): 0060
|
|
Lane 07 nibble 0 raw readback: 0026
|
|
Lane 07 nibble 0 adjusted value (pre nibble): 0066
|
|
Lane 07 nibble 0 adjusted value (post nibble): 0066
|
|
Lane 08 nibble 0 raw readback: 0042
|
|
Lane 08 nibble 0 adjusted value (pre nibble): 0042
|
|
Lane 08 nibble 0 adjusted value (post nibble): 0042
|
|
original critical gross delay: 0
|
|
new critical gross delay: 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480490
|
|
DIMM 1 RttWr: 2
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680490
|
|
DIMM 1 RttWr: 2
|
|
fam15_receiver_enable_training_seed: using seed: 003f
|
|
fam15_receiver_enable_training_seed: using seed: 003f
|
|
TrainRcvrEn: Status 2205
|
|
TrainRcvrEn: ErrStatus 0
|
|
TrainRcvrEn: ErrCode 0
|
|
TrainRcvrEn: Done
|
|
|
|
TrainDQSReceiverEnCyc: Status 2205
|
|
TrainDQSReceiverEnCyc: TrainErrors 24000
|
|
TrainDQSReceiverEnCyc: ErrStatus 24000
|
|
TrainDQSReceiverEnCyc: ErrCode 0
|
|
TrainDQSReceiverEnCyc: Done
|
|
|
|
DQSTiming_D: Restarting training on algorithm request
|
|
SetTargetFreq: Start
|
|
SetTargetFreq: Node 0: New frequency code: 0004
|
|
ChangeMemClk: Start
|
|
set_2t_configuration: Start
|
|
set_2t_configuration: Done
|
|
mct_BeforePlatformSpec: Start
|
|
mct_BeforePlatformSpec: Done
|
|
mct_PlatformSpec: Start
|
|
Programmed DCT 0 timing/termination pattern 00000000 00112222
|
|
mct_PlatformSpec: Done
|
|
ChangeMemClk: Done
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: done training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
Preparing to send DCT 0 DIMM 1 RC10: 00 (F2xA8: 00000c00)
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 1
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC2: 04
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 1
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC8: 00
|
|
SetTargetFreq: Done
|
|
AutoCycTiming_D: Start
|
|
SPD2ndTiming: Start
|
|
SPD2ndTiming: Done
|
|
AutoCycTiming: Status 2205
|
|
AutoCycTiming: ErrStatus 0
|
|
AutoCycTiming: ErrCode 0
|
|
AutoCycTiming: Done
|
|
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: done training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
activate_spd_rom() for node 00
|
|
enable_spd_node0()
|
|
AgesaHwWlPhase1: training nibble 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
DIMM 1 RttWr: 0
|
|
Programmed DCT 0 write levelling ODT pattern 00000002 from DIMM 1 data
|
|
Lane 00 initial seed: 003e
|
|
Lane 01 initial seed: 003e
|
|
Lane 02 initial seed: 003e
|
|
Lane 03 initial seed: 003e
|
|
Lane 04 initial seed: 003e
|
|
Lane 05 initial seed: 003e
|
|
Lane 06 initial seed: 003e
|
|
Lane 07 initial seed: 003e
|
|
Lane 08 initial seed: 003e
|
|
Lane 00 nibble 0 raw readback: 0041
|
|
Lane 00 nibble 0 adjusted value (pre nibble): 0041
|
|
Lane 00 nibble 0 adjusted value (post nibble): 0041
|
|
Lane 01 nibble 0 raw readback: 003f
|
|
Lane 01 nibble 0 adjusted value (pre nibble): 003f
|
|
Lane 01 nibble 0 adjusted value (post nibble): 003f
|
|
Lane 02 nibble 0 raw readback: 003b
|
|
Lane 02 nibble 0 adjusted value (pre nibble): 003b
|
|
Lane 02 nibble 0 adjusted value (post nibble): 003b
|
|
Lane 03 nibble 0 raw readback: 0037
|
|
Lane 03 nibble 0 adjusted value (pre nibble): 0037
|
|
Lane 03 nibble 0 adjusted value (post nibble): 0037
|
|
Lane 04 nibble 0 raw readback: 0035
|
|
Lane 04 nibble 0 adjusted value (pre nibble): 0035
|
|
Lane 04 nibble 0 adjusted value (post nibble): 0035
|
|
Lane 05 nibble 0 raw readback: 003a
|
|
Lane 05 nibble 0 adjusted value (pre nibble): 003a
|
|
Lane 05 nibble 0 adjusted value (post nibble): 003a
|
|
Lane 06 nibble 0 raw readback: 0040
|
|
Lane 06 nibble 0 adjusted value (pre nibble): 0040
|
|
Lane 06 nibble 0 adjusted value (post nibble): 0040
|
|
Lane 07 nibble 0 raw readback: 0043
|
|
Lane 07 nibble 0 adjusted value (pre nibble): 0043
|
|
Lane 07 nibble 0 adjusted value (post nibble): 0043
|
|
Lane 08 nibble 0 raw readback: 0031
|
|
Lane 08 nibble 0 adjusted value (pre nibble): 0031
|
|
Lane 08 nibble 0 adjusted value (post nibble): 0031
|
|
original critical gross delay: 0
|
|
new critical gross delay: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
DIMM 1 RttWr: 0
|
|
fam15_receiver_enable_training_seed: using seed: 003f
|
|
fam15_receiver_enable_training_seed: using seed: 003f
|
|
TrainRcvrEn: Status 2205
|
|
TrainRcvrEn: ErrStatus 0
|
|
TrainRcvrEn: ErrCode 0
|
|
TrainRcvrEn: Done
|
|
|
|
activate_spd_rom() for node 00
|
|
enable_spd_node0()
|
|
SetTargetFreq: Start
|
|
SetTargetFreq: Node 0: New frequency code: 0006
|
|
ChangeMemClk: Start
|
|
set_2t_configuration: Start
|
|
set_2t_configuration: Done
|
|
mct_BeforePlatformSpec: Start
|
|
mct_BeforePlatformSpec: Done
|
|
mct_PlatformSpec: Start
|
|
Programmed DCT 0 timing/termination pattern 00000000 10112222
|
|
mct_PlatformSpec: Done
|
|
ChangeMemClk: Done
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: done training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
Preparing to send DCT 0 DIMM 1 RC10: 00 (F2xA8: 00000c00)
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 1
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC2: 04
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 1
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC8: 00
|
|
SetTargetFreq: Done
|
|
SPD2ndTiming: Start
|
|
SPD2ndTiming: Done
|
|
mct_BeforeDramInit_Prod_D: Start
|
|
mct_ProgramODT_D: Start
|
|
Programmed DCT 0 ODT pattern 00000000 00000000 00000000 08020000
|
|
mct_ProgramODT_D: Done
|
|
mct_BeforeDramInit_Prod_D: Done
|
|
mct_DramInit_Sw_D: Start
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR3 control word 004c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR0 control word 00401558
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR3 control word 006c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR0 control word 00601558
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_DramInit_Sw_D: Done
|
|
AgesaHwWlPhase1: training nibble 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
DIMM 1 RttWr: 0
|
|
Programmed DCT 0 write levelling ODT pattern 00000002 from DIMM 1 data
|
|
Lane 00 scaled delay: 0044
|
|
Lane 00 new seed: 0044
|
|
Lane 01 scaled delay: 0044
|
|
Lane 01 new seed: 0044
|
|
Lane 02 scaled delay: 0044
|
|
Lane 02 new seed: 0044
|
|
Lane 03 scaled delay: 0044
|
|
Lane 03 new seed: 0044
|
|
Lane 04 scaled delay: 0044
|
|
Lane 04 new seed: 0044
|
|
Lane 05 scaled delay: 0044
|
|
Lane 05 new seed: 0044
|
|
Lane 06 scaled delay: 0044
|
|
Lane 06 new seed: 0044
|
|
Lane 07 scaled delay: 0044
|
|
Lane 07 new seed: 0044
|
|
Lane 08 scaled delay: 0044
|
|
Lane 08 new seed: 0044
|
|
Lane 00 nibble 0 raw readback: 0048
|
|
Lane 00 nibble 0 adjusted value (pre nibble): 0048
|
|
Lane 00 nibble 0 adjusted value (post nibble): 0048
|
|
Lane 01 nibble 0 raw readback: 0046
|
|
Lane 01 nibble 0 adjusted value (pre nibble): 0046
|
|
Lane 01 nibble 0 adjusted value (post nibble): 0046
|
|
Lane 02 nibble 0 raw readback: 0041
|
|
Lane 02 nibble 0 adjusted value (pre nibble): 0041
|
|
Lane 02 nibble 0 adjusted value (post nibble): 0041
|
|
Lane 03 nibble 0 raw readback: 003c
|
|
Lane 03 nibble 0 adjusted value (pre nibble): 003c
|
|
Lane 03 nibble 0 adjusted value (post nibble): 003c
|
|
Lane 04 nibble 0 raw readback: 0039
|
|
Lane 04 nibble 0 adjusted value (pre nibble): 0039
|
|
Lane 04 nibble 0 adjusted value (post nibble): 0039
|
|
Lane 05 nibble 0 raw readback: 003f
|
|
Lane 05 nibble 0 adjusted value (pre nibble): 003f
|
|
Lane 05 nibble 0 adjusted value (post nibble): 003f
|
|
Lane 06 nibble 0 raw readback: 0047
|
|
Lane 06 nibble 0 adjusted value (pre nibble): 0047
|
|
Lane 06 nibble 0 adjusted value (post nibble): 0047
|
|
Lane 07 nibble 0 raw readback: 004a
|
|
Lane 07 nibble 0 adjusted value (pre nibble): 004a
|
|
Lane 07 nibble 0 adjusted value (post nibble): 004a
|
|
Lane 08 nibble 0 raw readback: 0035
|
|
Lane 08 nibble 0 adjusted value (pre nibble): 0035
|
|
Lane 08 nibble 0 adjusted value (post nibble): 0035
|
|
original critical gross delay: 0
|
|
new critical gross delay: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
DIMM 1 RttWr: 0
|
|
SetTargetFreq: Start
|
|
SetTargetFreq: Node 0: New frequency code: 000a
|
|
ChangeMemClk: Start
|
|
set_2t_configuration: Start
|
|
set_2t_configuration: Done
|
|
mct_BeforePlatformSpec: Start
|
|
mct_BeforePlatformSpec: Done
|
|
mct_PlatformSpec: Start
|
|
Programmed DCT 0 timing/termination pattern 00393c39 20112222
|
|
mct_PlatformSpec: Done
|
|
ChangeMemClk: Done
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: done training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
Preparing to send DCT 0 DIMM 1 RC10: 01 (F2xA8: 00000c00)
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 0
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC2: 00
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 0
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC8: 00
|
|
SetTargetFreq: Done
|
|
SPD2ndTiming: Start
|
|
SPD2ndTiming: Done
|
|
mct_BeforeDramInit_Prod_D: Start
|
|
mct_ProgramODT_D: Start
|
|
Programmed DCT 0 ODT pattern 00000000 00000000 00000000 08020000
|
|
mct_ProgramODT_D: Done
|
|
mct_BeforeDramInit_Prod_D: Done
|
|
mct_DramInit_Sw_D: Start
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480088
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR3 control word 004c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR0 control word 00401958
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680088
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR3 control word 006c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR0 control word 00601958
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_DramInit_Sw_D: Done
|
|
AgesaHwWlPhase1: training nibble 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480088
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680088
|
|
DIMM 1 RttWr: 0
|
|
Programmed DCT 0 write levelling ODT pattern 00000002 from DIMM 1 data
|
|
Lane 00 scaled delay: 0055
|
|
Lane 00 new seed: 0055
|
|
Lane 01 scaled delay: 0052
|
|
Lane 01 new seed: 0052
|
|
Lane 02 scaled delay: 004b
|
|
Lane 02 new seed: 004b
|
|
Lane 03 scaled delay: 0045
|
|
Lane 03 new seed: 0045
|
|
Lane 04 scaled delay: 0041
|
|
Lane 04 new seed: 0041
|
|
Lane 05 scaled delay: 0049
|
|
Lane 05 new seed: 0049
|
|
Lane 06 scaled delay: 0053
|
|
Lane 06 new seed: 0053
|
|
Lane 07 scaled delay: 0057
|
|
Lane 07 new seed: 0057
|
|
Lane 08 scaled delay: 003b
|
|
Lane 08 new seed: 003b
|
|
Lane 00 nibble 0 raw readback: 0057
|
|
Lane 00 nibble 0 adjusted value (pre nibble): 0057
|
|
Lane 00 nibble 0 adjusted value (post nibble): 0057
|
|
Lane 01 nibble 0 raw readback: 0052
|
|
Lane 01 nibble 0 adjusted value (pre nibble): 0052
|
|
Lane 01 nibble 0 adjusted value (post nibble): 0052
|
|
Lane 02 nibble 0 raw readback: 004c
|
|
Lane 02 nibble 0 adjusted value (pre nibble): 004c
|
|
Lane 02 nibble 0 adjusted value (post nibble): 004c
|
|
Lane 03 nibble 0 raw readback: 0046
|
|
Lane 03 nibble 0 adjusted value (pre nibble): 0046
|
|
Lane 03 nibble 0 adjusted value (post nibble): 0046
|
|
Lane 04 nibble 0 raw readback: 0041
|
|
Lane 04 nibble 0 adjusted value (pre nibble): 0041
|
|
Lane 04 nibble 0 adjusted value (post nibble): 0041
|
|
Lane 05 nibble 0 raw readback: 004b
|
|
Lane 05 nibble 0 adjusted value (pre nibble): 004b
|
|
Lane 05 nibble 0 adjusted value (post nibble): 004b
|
|
Lane 06 nibble 0 raw readback: 0054
|
|
Lane 06 nibble 0 adjusted value (pre nibble): 0054
|
|
Lane 06 nibble 0 adjusted value (post nibble): 0054
|
|
Lane 07 nibble 0 raw readback: 0059
|
|
Lane 07 nibble 0 adjusted value (pre nibble): 0059
|
|
Lane 07 nibble 0 adjusted value (post nibble): 0059
|
|
Lane 08 nibble 0 raw readback: 003b
|
|
Lane 08 nibble 0 adjusted value (pre nibble): 003b
|
|
Lane 08 nibble 0 adjusted value (post nibble): 003b
|
|
original critical gross delay: 0
|
|
new critical gross delay: 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480088
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680088
|
|
DIMM 1 RttWr: 0
|
|
SetTargetFreq: Start
|
|
SetTargetFreq: Node 0: New frequency code: 000e
|
|
ChangeMemClk: Start
|
|
set_2t_configuration: Start
|
|
set_2t_configuration: Done
|
|
mct_BeforePlatformSpec: Start
|
|
mct_BeforePlatformSpec: Done
|
|
mct_PlatformSpec: Start
|
|
Programmed DCT 0 timing/termination pattern 00373a37 30112222
|
|
mct_PlatformSpec: Done
|
|
ChangeMemClk: Done
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: done training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
Preparing to send DCT 0 DIMM 1 RC10: 02 (F2xA8: 00000c00)
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 0
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC2: 00
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 0
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC8: 00
|
|
SetTargetFreq: Done
|
|
SPD2ndTiming: Start
|
|
SPD2ndTiming: Done
|
|
mct_BeforeDramInit_Prod_D: Start
|
|
mct_ProgramODT_D: Start
|
|
Programmed DCT 0 ODT pattern 00000000 00000000 00000000 08020000
|
|
mct_ProgramODT_D: Done
|
|
mct_BeforeDramInit_Prod_D: Done
|
|
mct_DramInit_Sw_D: Start
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480490
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR3 control word 004c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR0 control word 00401b58
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680490
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR3 control word 006c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR0 control word 00601b58
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_DramInit_Sw_D: Done
|
|
AgesaHwWlPhase1: training nibble 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480490
|
|
DIMM 1 RttWr: 2
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680490
|
|
DIMM 1 RttWr: 2
|
|
Programmed DCT 0 write levelling ODT pattern 00000002 from DIMM 1 data
|
|
Lane 00 scaled delay: 0064
|
|
Lane 00 new seed: 0064
|
|
Lane 01 scaled delay: 005e
|
|
Lane 01 new seed: 005e
|
|
Lane 02 scaled delay: 0057
|
|
Lane 02 new seed: 0057
|
|
Lane 03 scaled delay: 004f
|
|
Lane 03 new seed: 004f
|
|
Lane 04 scaled delay: 0049
|
|
Lane 04 new seed: 0049
|
|
Lane 05 scaled delay: 0055
|
|
Lane 05 new seed: 0055
|
|
Lane 06 scaled delay: 0061
|
|
Lane 06 new seed: 0061
|
|
Lane 07 scaled delay: 0067
|
|
Lane 07 new seed: 0067
|
|
Lane 08 scaled delay: 0041
|
|
Lane 08 new seed: 0041
|
|
Lane 00 nibble 0 raw readback: 0022
|
|
Lane 00 nibble 0 adjusted value (pre nibble): 0062
|
|
Lane 00 nibble 0 adjusted value (post nibble): 0062
|
|
Lane 01 nibble 0 raw readback: 005d
|
|
Lane 01 nibble 0 adjusted value (pre nibble): 005d
|
|
Lane 01 nibble 0 adjusted value (post nibble): 005d
|
|
Lane 02 nibble 0 raw readback: 0055
|
|
Lane 02 nibble 0 adjusted value (pre nibble): 0055
|
|
Lane 02 nibble 0 adjusted value (post nibble): 0055
|
|
Lane 03 nibble 0 raw readback: 004d
|
|
Lane 03 nibble 0 adjusted value (pre nibble): 004d
|
|
Lane 03 nibble 0 adjusted value (post nibble): 004d
|
|
Lane 04 nibble 0 raw readback: 0047
|
|
Lane 04 nibble 0 adjusted value (pre nibble): 0047
|
|
Lane 04 nibble 0 adjusted value (post nibble): 0047
|
|
Lane 05 nibble 0 raw readback: 0052
|
|
Lane 05 nibble 0 adjusted value (pre nibble): 0052
|
|
Lane 05 nibble 0 adjusted value (post nibble): 0052
|
|
Lane 06 nibble 0 raw readback: 001f
|
|
Lane 06 nibble 0 adjusted value (pre nibble): 005f
|
|
Lane 06 nibble 0 adjusted value (post nibble): 005f
|
|
Lane 07 nibble 0 raw readback: 0025
|
|
Lane 07 nibble 0 adjusted value (pre nibble): 0065
|
|
Lane 07 nibble 0 adjusted value (post nibble): 0065
|
|
Lane 08 nibble 0 raw readback: 0041
|
|
Lane 08 nibble 0 adjusted value (pre nibble): 0041
|
|
Lane 08 nibble 0 adjusted value (post nibble): 0041
|
|
original critical gross delay: 0
|
|
new critical gross delay: 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480490
|
|
DIMM 1 RttWr: 2
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680490
|
|
DIMM 1 RttWr: 2
|
|
fam15_receiver_enable_training_seed: using seed: 003f
|
|
fam15_receiver_enable_training_seed: using seed: 003f
|
|
TrainRcvrEn: Status 2205
|
|
TrainRcvrEn: ErrStatus 0
|
|
TrainRcvrEn: ErrCode 0
|
|
TrainRcvrEn: Done
|
|
|
|
TrainDQSReceiverEnCyc_D_Fam15: lane 0 failed to train! Training for receiver 2 on DCT 0 aborted
|
|
TrainDQSReceiverEnCyc: Status 2205
|
|
TrainDQSReceiverEnCyc: TrainErrors 44000
|
|
TrainDQSReceiverEnCyc: ErrStatus 44000
|
|
TrainDQSReceiverEnCyc: ErrCode 0
|
|
TrainDQSReceiverEnCyc: Done
|
|
|
|
DIMM training FAILED! Restarting system...
|
|
|
|
coreboot-4.5-1097-g610d1c6 Thu Mar 2 19:40:30 UTC 2017 romstage starting...
|
|
Initial stack pointer: 000dffc8
|
|
CPU APICID 00 start flag set
|
|
BSP Family_Model: 00600f12
|
|
*sysinfo range: [000c2d20,000cd28c]
|
|
bsp_apicid = 00
|
|
cpu_init_detectedx = 00000000
|
|
sb700 reset flags: 0004
|
|
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
|
|
CBFS: Locating 'microcode_amd.bin'
|
|
CBFS: Found @ offset 6be80 size 318c
|
|
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
|
|
CBFS: Locating 'microcode_amd_fam15h.bin'
|
|
CBFS: Found @ offset 2da40 size 1ec4
|
|
[microcode] patch id to apply = 0x0600063d
|
|
[microcode] updated to patch id = 0x0600063d success
|
|
cpuSetAMDMSR done
|
|
Enter amd_ht_init()
|
|
Forcing HT links to isochronous mode due to enabled IOMMU
|
|
Exit amd_ht_init()
|
|
amd_ht_fixup()
|
|
cpuSetAMDPCI 00 done
|
|
Prep FID/VID Node:00
|
|
F3x80: e20be281
|
|
F3x84: 01e200e2
|
|
F3xD4: c3312f21
|
|
F3xD8: 03000016
|
|
F3xDC: 05475634
|
|
core0 started:
|
|
sr5650_early_setup()
|
|
get_cpu_rev EAX=0x600f12.
|
|
CPU Rev is Fam 15.
|
|
NB Revision is A12.
|
|
fam10_optimization()
|
|
sr5650_por_init
|
|
Enabling IOMMU
|
|
sb700_early_setup()
|
|
sb700_devices_por_init()
|
|
sb700_devices_por_init(): SMBus Device, BDF:0-20-0
|
|
SMBus controller enabled, sb revision is A15
|
|
sb700_devices_por_init: Disabling ISA DMA support
|
|
sb700_devices_por_init(): IDE Device, BDF:0-20-1
|
|
sb700_devices_por_init(): LPC Device, BDF:0-20-3
|
|
sb700_devices_por_init(): P2P Bridge, BDF:0-20-4
|
|
sb700_devices_por_init(): SATA Device, BDF:0-17-0
|
|
sb700_pmio_por_init()
|
|
start_other_cores()
|
|
init node: 00 cores: 05 pass 1
|
|
Start other core - nodeid: 00 cores: 05
|
|
get_boot_apic_id: using 2 as APIC ID for node 0, core 2
|
|
get_boot_apic_id: using 4 as APIC ID for node 0, core 4
|
|
started ap apicid: get_boot_apic_id: using 1 as APIC ID for node 0, core 1
|
|
* AP 01started
|
|
get_boot_apic_id: using 2 as APIC ID for node 0, core 2
|
|
* AP 02started
|
|
get_boot_apic_id: using 3 as APIC ID for node 0, core 3
|
|
* AP 03started
|
|
get_boot_apic_id: using 4 as APIC ID for node 0, core 4
|
|
* AP 04started
|
|
get_boot_apic_id: using 5 as APIC ID for node 0, core 5
|
|
* AP 05started
|
|
|
|
|
|
Begin FIDVID MSR 0xc0010071 0x5aca009e 0x38023411
|
|
End FIDVIDMSR 0xc0010071 0x5aca009e 0x38023411
|
|
sr5650_htinit: Node 0 Link 2, HT freq=e.
|
|
sr5650_htinit: HT3 mode
|
|
Node 00 DIMM voltage set to index 00
|
|
Node 01 DIMM voltage set to index 00
|
|
stopped ap apicid: get_boot_apic_id: using 1 as APIC ID for node 0, core 1
|
|
* AP 01stopped
|
|
get_boot_apic_id: using 2 as APIC ID for node 0, core 2
|
|
* AP 02stopped
|
|
get_boot_apic_id: using 3 as APIC ID for node 0, core 3
|
|
* AP 03stopped
|
|
get_boot_apic_id: using 4 as APIC ID for node 0, core 4
|
|
* AP 04stopped
|
|
get_boot_apic_id: using 5 as APIC ID for node 0, core 5
|
|
* AP 05stopped
|
|
|
|
fill_mem_ctrl() detected 1 nodes
|
|
raminit_amdmct()
|
|
raminit_amdmct begin:
|
|
mctAutoInitMCT_D: mct_init Node 0
|
|
mctAutoInitMCT_D: mct_InitialMCT_D
|
|
mct_InitialMCT_D: mct_ForceNBPState0_En_Fam15
|
|
mctAutoInitMCT_D: mctSMBhub_Init
|
|
activate_spd_rom() for node 00
|
|
enable_spd_node0()
|
|
mctAutoInitMCT_D: mct_preInitDCT
|
|
DIMMPresence: DIMMValid=4
|
|
DIMMPresence: DIMMPresent=4
|
|
DIMMPresence: RegDIMMPresent=4
|
|
DIMMPresence: LRDIMMPresent=0
|
|
DIMMPresence: DimmECCPresent=4
|
|
DIMMPresence: DimmPARPresent=0
|
|
DIMMPresence: Dimmx4Present=4
|
|
DIMMPresence: Dimmx8Present=0
|
|
DIMMPresence: Dimmx16Present=0
|
|
DIMMPresence: DimmPlPresent=0
|
|
DIMMPresence: DimmDRPresent=4
|
|
DIMMPresence: DimmQRPresent=0
|
|
DIMMPresence: DATAload[0]=2
|
|
DIMMPresence: MAload[0]=20
|
|
DIMMPresence: MAdimms[0]=1
|
|
DIMMPresence: DATAload[1]=0
|
|
DIMMPresence: MAload[1]=0
|
|
DIMMPresence: MAdimms[1]=0
|
|
DIMMPresence: Status 2005
|
|
DIMMPresence: ErrStatus 0
|
|
DIMMPresence: ErrCode 0
|
|
DIMMPresence: Done
|
|
|
|
DCTPreInit_D: mct_DIMMPresence Done
|
|
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
|
|
CBFS: Locating 's3nv'
|
|
CBFS: Found @ offset 2fec0 size 10000
|
|
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
|
|
CBFS: Locating 's3nv'
|
|
CBFS: Found @ offset 2fec0 size 10000
|
|
mctAutoInitMCT_D: mct_init Node 1
|
|
mctAutoInitMCT_D: mct_init Node 2
|
|
mctAutoInitMCT_D: mct_init Node 3
|
|
mctAutoInitMCT_D: mct_init Node 4
|
|
mctAutoInitMCT_D: mct_init Node 5
|
|
mctAutoInitMCT_D: mct_init Node 6
|
|
mctAutoInitMCT_D: mct_init Node 7
|
|
mctAutoInitMCT_D: DIMMSetVoltage
|
|
Node 00 DIMM voltage set to index 01
|
|
mctAutoInitMCT_D: mctSMBhub_Init
|
|
activate_spd_rom() for node 00
|
|
enable_spd_node0()
|
|
mctAutoInitMCT_D: mct_initDCT
|
|
SPDCalcWidth: Status 2005
|
|
SPDCalcWidth: ErrStatus 0
|
|
SPDCalcWidth: ErrCode 0
|
|
SPDCalcWidth: Done
|
|
DCTInit_D: mct_SPDCalcWidth Done
|
|
AutoCycTiming_D: Start
|
|
mct_MaxLoadFreq: 1 registered DIMM on 1350mV channel; limiting to DDR3-1600
|
|
GetPresetmaxF_D: Start
|
|
GetPresetmaxF_D: Done
|
|
SPDGetTCL_D: Start
|
|
SPDGetTCL_D: DIMMCASL 5
|
|
SPDGetTCL_D: DIMMAutoSpeed 4
|
|
SPDGetTCL_D: Status 2005
|
|
SPDGetTCL_D: ErrStatus 0
|
|
SPDGetTCL_D: ErrCode 0
|
|
SPDGetTCL_D: Done
|
|
|
|
SPD2ndTiming: Start
|
|
SPD2ndTiming: Done
|
|
AutoCycTiming: Status 2005
|
|
AutoCycTiming: ErrStatus 0
|
|
AutoCycTiming: ErrCode 0
|
|
AutoCycTiming: Done
|
|
|
|
DCTInit_D: AutoCycTiming_D Done
|
|
SPDSetBanks: CSPresent c
|
|
SPDSetBanks: Status 2005
|
|
SPDSetBanks: ErrStatus 0
|
|
SPDSetBanks: ErrCode 0
|
|
SPDSetBanks: Done
|
|
|
|
AfterStitch pDCTstat->NodeSysBase = 0
|
|
mct_AfterStitchMemory: pDCTstat->NodeSysLimit = 3ffffff
|
|
StitchMemory: Status 2005
|
|
StitchMemory: ErrStatus 0
|
|
StitchMemory: ErrCode 0
|
|
StitchMemory: Done
|
|
|
|
InterleaveBanks_D: Status 2005
|
|
InterleaveBanks_D: ErrStatus 0
|
|
InterleaveBanks_D: ErrCode 0
|
|
InterleaveBanks_D: Done
|
|
|
|
AutoConfig_D: DramControl: 00002a06
|
|
AutoConfig_D: DramTimingLo: 00000000
|
|
AutoConfig_D: DramConfigMisc: 00000000
|
|
AutoConfig_D: DramConfigMisc2: 00000000
|
|
AutoConfig_D: DramConfigLo: 03082000
|
|
AutoConfig_D: DramConfigHi: 0f090084
|
|
InitDDRPhy: Start
|
|
InitDDRPhy: Done
|
|
mct_SetDramConfigHi_D: Start
|
|
set_2t_configuration: Start
|
|
set_2t_configuration: Done
|
|
mct_BeforePlatformSpec: Start
|
|
mct_BeforePlatformSpec: Done
|
|
mct_PlatformSpec: Start
|
|
Programmed DCT 0 timing/termination pattern 00000000 00112222
|
|
mct_PlatformSpec: Done
|
|
mct_SetDramConfigHi_D: DramConfigHi: 0f090084
|
|
*
|
|
mct_SetDramConfigHi_D: Done
|
|
mct_EarlyArbEn_D: Start
|
|
mct_EarlyArbEn_D: Done
|
|
AutoConfig: Status 2005
|
|
AutoConfig: ErrStatus 0
|
|
AutoConfig: ErrCode 0
|
|
AutoConfig: Done
|
|
|
|
DCTInit_D: AutoConfig_D Done
|
|
DCTInit_D: PlatformSpec_D Done
|
|
DCTFinalInit_D: StartupDCT_D Start
|
|
mct_BeforeDramInit_Prod_D: Start
|
|
mct_ProgramODT_D: Start
|
|
Programmed DCT 0 ODT pattern 00000000 00000000 00000000 08020000
|
|
mct_ProgramODT_D: Done
|
|
mct_BeforeDramInit_Prod_D: Done
|
|
mct_DramInit_Sw_D: Start
|
|
mct_DCTAccessDone: Start
|
|
mct_DCTAccessDone: Done
|
|
mct_DramControlReg_Init_D: Start
|
|
mct_DramControlReg_Init_D: F2xA8: 00000c00
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC0: 02
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC1: 00
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 1
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC2: 04
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC3: 05
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC4: 05
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC5: 05
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC6: 00
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC7: 00
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 1
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC8: 00
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC9: 0d
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC10: 00
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC11: 01
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC12: 00
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC13: 00
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC14: 00
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC15: 00
|
|
mct_DramControlReg_Init_D: Done
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR3 control word 004c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR0 control word 00401318
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR3 control word 006c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR0 control word 00601318
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_SendZQCmd: Start
|
|
mct_SendZQCmd: Done
|
|
mct_SendZQCmd: Start
|
|
mct_SendZQCmd: Done
|
|
mct_DCTAccessDone: Start
|
|
mct_DCTAccessDone: Done
|
|
mct_DramInit_Sw_D: Done
|
|
DCTFinalInit_D: StartupDCT_D Done
|
|
mctAutoInitMCT_D: SyncDCTsReady_D
|
|
mctAutoInitMCT_D: HTMemMapInit_D
|
|
Node: 00 base: 00 limit: 3ffffff BottomIO: c00000
|
|
Node: 00 base: 03 limit: 43fffff
|
|
Node: 01 base: 00 limit: 00
|
|
Node: 02 base: 00 limit: 00
|
|
Node: 03 base: 00 limit: 00
|
|
Node: 04 base: 00 limit: 00
|
|
Node: 05 base: 00 limit: 00
|
|
Node: 06 base: 00 limit: 00
|
|
Node: 07 base: 00 limit: 00
|
|
mctAutoInitMCT_D: mctHookAfterCPU
|
|
mctAutoInitMCT_D: DQSTiming_D
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: done training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
activate_spd_rom() for node 00
|
|
enable_spd_node0()
|
|
AgesaHwWlPhase1: training nibble 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
DIMM 1 RttWr: 0
|
|
Programmed DCT 0 write levelling ODT pattern 00000002 from DIMM 1 data
|
|
Lane 00 initial seed: 003e
|
|
Lane 01 initial seed: 003e
|
|
Lane 02 initial seed: 003e
|
|
Lane 03 initial seed: 003e
|
|
Lane 04 initial seed: 003e
|
|
Lane 05 initial seed: 003e
|
|
Lane 06 initial seed: 003e
|
|
Lane 07 initial seed: 003e
|
|
Lane 08 initial seed: 003e
|
|
Lane 00 nibble 0 raw readback: 0042
|
|
Lane 00 nibble 0 adjusted value (pre nibble): 0042
|
|
Lane 00 nibble 0 adjusted value (post nibble): 0042
|
|
Lane 01 nibble 0 raw readback: 0040
|
|
Lane 01 nibble 0 adjusted value (pre nibble): 0040
|
|
Lane 01 nibble 0 adjusted value (post nibble): 0040
|
|
Lane 02 nibble 0 raw readback: 003b
|
|
Lane 02 nibble 0 adjusted value (pre nibble): 003b
|
|
Lane 02 nibble 0 adjusted value (post nibble): 003b
|
|
Lane 03 nibble 0 raw readback: 0037
|
|
Lane 03 nibble 0 adjusted value (pre nibble): 0037
|
|
Lane 03 nibble 0 adjusted value (post nibble): 0037
|
|
Lane 04 nibble 0 raw readback: 0035
|
|
Lane 04 nibble 0 adjusted value (pre nibble): 0035
|
|
Lane 04 nibble 0 adjusted value (post nibble): 0035
|
|
Lane 05 nibble 0 raw readback: 003a
|
|
Lane 05 nibble 0 adjusted value (pre nibble): 003a
|
|
Lane 05 nibble 0 adjusted value (post nibble): 003a
|
|
Lane 06 nibble 0 raw readback: 0041
|
|
Lane 06 nibble 0 adjusted value (pre nibble): 0041
|
|
Lane 06 nibble 0 adjusted value (post nibble): 0041
|
|
Lane 07 nibble 0 raw readback: 0043
|
|
Lane 07 nibble 0 adjusted value (pre nibble): 0043
|
|
Lane 07 nibble 0 adjusted value (post nibble): 0043
|
|
Lane 08 nibble 0 raw readback: 0031
|
|
Lane 08 nibble 0 adjusted value (pre nibble): 0031
|
|
Lane 08 nibble 0 adjusted value (post nibble): 0031
|
|
original critical gross delay: 0
|
|
new critical gross delay: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
DIMM 1 RttWr: 0
|
|
fam15_receiver_enable_training_seed: using seed: 003f
|
|
fam15_receiver_enable_training_seed: using seed: 003f
|
|
TrainRcvrEn: Status 2205
|
|
TrainRcvrEn: ErrStatus 0
|
|
TrainRcvrEn: ErrCode 0
|
|
TrainRcvrEn: Done
|
|
|
|
activate_spd_rom() for node 00
|
|
enable_spd_node0()
|
|
SetTargetFreq: Start
|
|
SetTargetFreq: Node 0: New frequency code: 0006
|
|
ChangeMemClk: Start
|
|
set_2t_configuration: Start
|
|
set_2t_configuration: Done
|
|
mct_BeforePlatformSpec: Start
|
|
mct_BeforePlatformSpec: Done
|
|
mct_PlatformSpec: Start
|
|
Programmed DCT 0 timing/termination pattern 00000000 10112222
|
|
mct_PlatformSpec: Done
|
|
ChangeMemClk: Done
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: done training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
Preparing to send DCT 0 DIMM 1 RC10: 00 (F2xA8: 00000c00)
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 1
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC2: 04
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 1
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC8: 00
|
|
SetTargetFreq: Done
|
|
SPD2ndTiming: Start
|
|
SPD2ndTiming: Done
|
|
mct_BeforeDramInit_Prod_D: Start
|
|
mct_ProgramODT_D: Start
|
|
Programmed DCT 0 ODT pattern 00000000 00000000 00000000 08020000
|
|
mct_ProgramODT_D: Done
|
|
mct_BeforeDramInit_Prod_D: Done
|
|
mct_DramInit_Sw_D: Start
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR3 control word 004c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR0 control word 00401558
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR3 control word 006c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR0 control word 00601558
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_DramInit_Sw_D: Done
|
|
AgesaHwWlPhase1: training nibble 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
DIMM 1 RttWr: 0
|
|
Programmed DCT 0 write levelling ODT pattern 00000002 from DIMM 1 data
|
|
Lane 00 scaled delay: 0044
|
|
Lane 00 new seed: 0044
|
|
Lane 01 scaled delay: 0044
|
|
Lane 01 new seed: 0044
|
|
Lane 02 scaled delay: 0044
|
|
Lane 02 new seed: 0044
|
|
Lane 03 scaled delay: 0044
|
|
Lane 03 new seed: 0044
|
|
Lane 04 scaled delay: 0044
|
|
Lane 04 new seed: 0044
|
|
Lane 05 scaled delay: 0044
|
|
Lane 05 new seed: 0044
|
|
Lane 06 scaled delay: 0044
|
|
Lane 06 new seed: 0044
|
|
Lane 07 scaled delay: 0044
|
|
Lane 07 new seed: 0044
|
|
Lane 08 scaled delay: 0044
|
|
Lane 08 new seed: 0044
|
|
Lane 00 nibble 0 raw readback: 0048
|
|
Lane 00 nibble 0 adjusted value (pre nibble): 0048
|
|
Lane 00 nibble 0 adjusted value (post nibble): 0048
|
|
Lane 01 nibble 0 raw readback: 0045
|
|
Lane 01 nibble 0 adjusted value (pre nibble): 0045
|
|
Lane 01 nibble 0 adjusted value (post nibble): 0045
|
|
Lane 02 nibble 0 raw readback: 0040
|
|
Lane 02 nibble 0 adjusted value (pre nibble): 0040
|
|
Lane 02 nibble 0 adjusted value (post nibble): 0040
|
|
Lane 03 nibble 0 raw readback: 003b
|
|
Lane 03 nibble 0 adjusted value (pre nibble): 003b
|
|
Lane 03 nibble 0 adjusted value (post nibble): 003b
|
|
Lane 04 nibble 0 raw readback: 0038
|
|
Lane 04 nibble 0 adjusted value (pre nibble): 0038
|
|
Lane 04 nibble 0 adjusted value (post nibble): 0038
|
|
Lane 05 nibble 0 raw readback: 003e
|
|
Lane 05 nibble 0 adjusted value (pre nibble): 003e
|
|
Lane 05 nibble 0 adjusted value (post nibble): 003e
|
|
Lane 06 nibble 0 raw readback: 0046
|
|
Lane 06 nibble 0 adjusted value (pre nibble): 0046
|
|
Lane 06 nibble 0 adjusted value (post nibble): 0046
|
|
Lane 07 nibble 0 raw readback: 0049
|
|
Lane 07 nibble 0 adjusted value (pre nibble): 0049
|
|
Lane 07 nibble 0 adjusted value (post nibble): 0049
|
|
Lane 08 nibble 0 raw readback: 0034
|
|
Lane 08 nibble 0 adjusted value (pre nibble): 0034
|
|
Lane 08 nibble 0 adjusted value (post nibble): 0034
|
|
original critical gross delay: 0
|
|
new critical gross delay: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
DIMM 1 RttWr: 0
|
|
SetTargetFreq: Start
|
|
SetTargetFreq: Node 0: New frequency code: 000a
|
|
ChangeMemClk: Start
|
|
set_2t_configuration: Start
|
|
set_2t_configuration: Done
|
|
mct_BeforePlatformSpec: Start
|
|
mct_BeforePlatformSpec: Done
|
|
mct_PlatformSpec: Start
|
|
Programmed DCT 0 timing/termination pattern 00393c39 20112222
|
|
mct_PlatformSpec: Done
|
|
ChangeMemClk: Done
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: done training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
Preparing to send DCT 0 DIMM 1 RC10: 01 (F2xA8: 00000c00)
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 0
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC2: 00
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 0
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC8: 00
|
|
SetTargetFreq: Done
|
|
SPD2ndTiming: Start
|
|
SPD2ndTiming: Done
|
|
mct_BeforeDramInit_Prod_D: Start
|
|
mct_ProgramODT_D: Start
|
|
Programmed DCT 0 ODT pattern 00000000 00000000 00000000 08020000
|
|
mct_ProgramODT_D: Done
|
|
mct_BeforeDramInit_Prod_D: Done
|
|
mct_DramInit_Sw_D: Start
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480088
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR3 control word 004c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR0 control word 00401958
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680088
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR3 control word 006c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR0 control word 00601958
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_DramInit_Sw_D: Done
|
|
AgesaHwWlPhase1: training nibble 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480088
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680088
|
|
DIMM 1 RttWr: 0
|
|
Programmed DCT 0 write levelling ODT pattern 00000002 from DIMM 1 data
|
|
Lane 00 scaled delay: 0055
|
|
Lane 00 new seed: 0055
|
|
Lane 01 scaled delay: 0051
|
|
Lane 01 new seed: 0051
|
|
Lane 02 scaled delay: 004a
|
|
Lane 02 new seed: 004a
|
|
Lane 03 scaled delay: 0043
|
|
Lane 03 new seed: 0043
|
|
Lane 04 scaled delay: 003f
|
|
Lane 04 new seed: 003f
|
|
Lane 05 scaled delay: 0047
|
|
Lane 05 new seed: 0047
|
|
Lane 06 scaled delay: 0052
|
|
Lane 06 new seed: 0052
|
|
Lane 07 scaled delay: 0056
|
|
Lane 07 new seed: 0056
|
|
Lane 08 scaled delay: 003a
|
|
Lane 08 new seed: 003a
|
|
Lane 00 nibble 0 raw readback: 0056
|
|
Lane 00 nibble 0 adjusted value (pre nibble): 0056
|
|
Lane 00 nibble 0 adjusted value (post nibble): 0056
|
|
Lane 01 nibble 0 raw readback: 0052
|
|
Lane 01 nibble 0 adjusted value (pre nibble): 0052
|
|
Lane 01 nibble 0 adjusted value (post nibble): 0052
|
|
Lane 02 nibble 0 raw readback: 004c
|
|
Lane 02 nibble 0 adjusted value (pre nibble): 004c
|
|
Lane 02 nibble 0 adjusted value (post nibble): 004c
|
|
Lane 03 nibble 0 raw readback: 0046
|
|
Lane 03 nibble 0 adjusted value (pre nibble): 0046
|
|
Lane 03 nibble 0 adjusted value (post nibble): 0046
|
|
Lane 04 nibble 0 raw readback: 0041
|
|
Lane 04 nibble 0 adjusted value (pre nibble): 0041
|
|
Lane 04 nibble 0 adjusted value (post nibble): 0041
|
|
Lane 05 nibble 0 raw readback: 004a
|
|
Lane 05 nibble 0 adjusted value (pre nibble): 004a
|
|
Lane 05 nibble 0 adjusted value (post nibble): 004a
|
|
Lane 06 nibble 0 raw readback: 0053
|
|
Lane 06 nibble 0 adjusted value (pre nibble): 0053
|
|
Lane 06 nibble 0 adjusted value (post nibble): 0053
|
|
Lane 07 nibble 0 raw readback: 0058
|
|
Lane 07 nibble 0 adjusted value (pre nibble): 0058
|
|
Lane 07 nibble 0 adjusted value (post nibble): 0058
|
|
Lane 08 nibble 0 raw readback: 003b
|
|
Lane 08 nibble 0 adjusted value (pre nibble): 003b
|
|
Lane 08 nibble 0 adjusted value (post nibble): 003b
|
|
original critical gross delay: 0
|
|
new critical gross delay: 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480088
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680088
|
|
DIMM 1 RttWr: 0
|
|
SetTargetFreq: Start
|
|
SetTargetFreq: Node 0: New frequency code: 000e
|
|
ChangeMemClk: Start
|
|
set_2t_configuration: Start
|
|
set_2t_configuration: Done
|
|
mct_BeforePlatformSpec: Start
|
|
mct_BeforePlatformSpec: Done
|
|
mct_PlatformSpec: Start
|
|
Programmed DCT 0 timing/termination pattern 00373a37 30112222
|
|
mct_PlatformSpec: Done
|
|
ChangeMemClk: Done
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: done training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
Preparing to send DCT 0 DIMM 1 RC10: 02 (F2xA8: 00000c00)
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 0
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC2: 00
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 0
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC8: 00
|
|
SetTargetFreq: Done
|
|
SPD2ndTiming: Start
|
|
SPD2ndTiming: Done
|
|
mct_BeforeDramInit_Prod_D: Start
|
|
mct_ProgramODT_D: Start
|
|
Programmed DCT 0 ODT pattern 00000000 00000000 00000000 08020000
|
|
mct_ProgramODT_D: Done
|
|
mct_BeforeDramInit_Prod_D: Done
|
|
mct_DramInit_Sw_D: Start
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480490
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR3 control word 004c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR0 control word 00401b58
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680490
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR3 control word 006c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR0 control word 00601b58
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_DramInit_Sw_D: Done
|
|
AgesaHwWlPhase1: training nibble 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480490
|
|
DIMM 1 RttWr: 2
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680490
|
|
DIMM 1 RttWr: 2
|
|
Programmed DCT 0 write levelling ODT pattern 00000002 from DIMM 1 data
|
|
Lane 00 scaled delay: 0063
|
|
Lane 00 new seed: 0063
|
|
Lane 01 scaled delay: 005e
|
|
Lane 01 new seed: 005e
|
|
Lane 02 scaled delay: 0057
|
|
Lane 02 new seed: 0057
|
|
Lane 03 scaled delay: 004f
|
|
Lane 03 new seed: 004f
|
|
Lane 04 scaled delay: 0049
|
|
Lane 04 new seed: 0049
|
|
Lane 05 scaled delay: 0054
|
|
Lane 05 new seed: 0054
|
|
Lane 06 scaled delay: 005f
|
|
Lane 06 new seed: 005f
|
|
Lane 07 scaled delay: 0066
|
|
Lane 07 new seed: 0066
|
|
Lane 08 scaled delay: 0041
|
|
Lane 08 new seed: 0041
|
|
Lane 00 nibble 0 raw readback: 0023
|
|
Lane 00 nibble 0 adjusted value (pre nibble): 0063
|
|
Lane 00 nibble 0 adjusted value (post nibble): 0063
|
|
Lane 01 nibble 0 raw readback: 005e
|
|
Lane 01 nibble 0 adjusted value (pre nibble): 005e
|
|
Lane 01 nibble 0 adjusted value (post nibble): 005e
|
|
Lane 02 nibble 0 raw readback: 0056
|
|
Lane 02 nibble 0 adjusted value (pre nibble): 0056
|
|
Lane 02 nibble 0 adjusted value (post nibble): 0056
|
|
Lane 03 nibble 0 raw readback: 004d
|
|
Lane 03 nibble 0 adjusted value (pre nibble): 004d
|
|
Lane 03 nibble 0 adjusted value (post nibble): 004d
|
|
Lane 04 nibble 0 raw readback: 0048
|
|
Lane 04 nibble 0 adjusted value (pre nibble): 0048
|
|
Lane 04 nibble 0 adjusted value (post nibble): 0048
|
|
Lane 05 nibble 0 raw readback: 0053
|
|
Lane 05 nibble 0 adjusted value (pre nibble): 0053
|
|
Lane 05 nibble 0 adjusted value (post nibble): 0053
|
|
Lane 06 nibble 0 raw readback: 005f
|
|
Lane 06 nibble 0 adjusted value (pre nibble): 005f
|
|
Lane 06 nibble 0 adjusted value (post nibble): 005f
|
|
Lane 07 nibble 0 raw readback: 0025
|
|
Lane 07 nibble 0 adjusted value (pre nibble): 0065
|
|
Lane 07 nibble 0 adjusted value (post nibble): 0065
|
|
Lane 08 nibble 0 raw readback: 0041
|
|
Lane 08 nibble 0 adjusted value (pre nibble): 0041
|
|
Lane 08 nibble 0 adjusted value (post nibble): 0041
|
|
original critical gross delay: 0
|
|
new critical gross delay: 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480490
|
|
DIMM 1 RttWr: 2
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680490
|
|
DIMM 1 RttWr: 2
|
|
fam15_receiver_enable_training_seed: using seed: 003f
|
|
fam15_receiver_enable_training_seed: using seed: 003f
|
|
TrainRcvrEn: Status 2205
|
|
TrainRcvrEn: ErrStatus 0
|
|
TrainRcvrEn: ErrCode 0
|
|
TrainRcvrEn: Done
|
|
|
|
TrainDQSReceiverEnCyc: Status 2205
|
|
TrainDQSReceiverEnCyc: TrainErrors 24000
|
|
TrainDQSReceiverEnCyc: ErrStatus 24000
|
|
TrainDQSReceiverEnCyc: ErrCode 0
|
|
TrainDQSReceiverEnCyc: Done
|
|
|
|
DQSTiming_D: Restarting training on algorithm request
|
|
SetTargetFreq: Start
|
|
SetTargetFreq: Node 0: New frequency code: 0004
|
|
ChangeMemClk: Start
|
|
set_2t_configuration: Start
|
|
set_2t_configuration: Done
|
|
mct_BeforePlatformSpec: Start
|
|
mct_BeforePlatformSpec: Done
|
|
mct_PlatformSpec: Start
|
|
Programmed DCT 0 timing/termination pattern 00000000 00112222
|
|
mct_PlatformSpec: Done
|
|
ChangeMemClk: Done
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: done training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
Preparing to send DCT 0 DIMM 1 RC10: 00 (F2xA8: 00000c00)
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 1
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC2: 04
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 1
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC8: 00
|
|
SetTargetFreq: Done
|
|
AutoCycTiming_D: Start
|
|
SPD2ndTiming: Start
|
|
SPD2ndTiming: Done
|
|
AutoCycTiming: Status 2205
|
|
AutoCycTiming: ErrStatus 0
|
|
AutoCycTiming: ErrCode 0
|
|
AutoCycTiming: Done
|
|
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: done training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
activate_spd_rom() for node 00
|
|
enable_spd_node0()
|
|
AgesaHwWlPhase1: training nibble 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
DIMM 1 RttWr: 0
|
|
Programmed DCT 0 write levelling ODT pattern 00000002 from DIMM 1 data
|
|
Lane 00 initial seed: 003e
|
|
Lane 01 initial seed: 003e
|
|
Lane 02 initial seed: 003e
|
|
Lane 03 initial seed: 003e
|
|
Lane 04 initial seed: 003e
|
|
Lane 05 initial seed: 003e
|
|
Lane 06 initial seed: 003e
|
|
Lane 07 initial seed: 003e
|
|
Lane 08 initial seed: 003e
|
|
Lane 00 nibble 0 raw readback: 0042
|
|
Lane 00 nibble 0 adjusted value (pre nibble): 0042
|
|
Lane 00 nibble 0 adjusted value (post nibble): 0042
|
|
Lane 01 nibble 0 raw readback: 003f
|
|
Lane 01 nibble 0 adjusted value (pre nibble): 003f
|
|
Lane 01 nibble 0 adjusted value (post nibble): 003f
|
|
Lane 02 nibble 0 raw readback: 003b
|
|
Lane 02 nibble 0 adjusted value (pre nibble): 003b
|
|
Lane 02 nibble 0 adjusted value (post nibble): 003b
|
|
Lane 03 nibble 0 raw readback: 0037
|
|
Lane 03 nibble 0 adjusted value (pre nibble): 0037
|
|
Lane 03 nibble 0 adjusted value (post nibble): 0037
|
|
Lane 04 nibble 0 raw readback: 0035
|
|
Lane 04 nibble 0 adjusted value (pre nibble): 0035
|
|
Lane 04 nibble 0 adjusted value (post nibble): 0035
|
|
Lane 05 nibble 0 raw readback: 003a
|
|
Lane 05 nibble 0 adjusted value (pre nibble): 003a
|
|
Lane 05 nibble 0 adjusted value (post nibble): 003a
|
|
Lane 06 nibble 0 raw readback: 0040
|
|
Lane 06 nibble 0 adjusted value (pre nibble): 0040
|
|
Lane 06 nibble 0 adjusted value (post nibble): 0040
|
|
Lane 07 nibble 0 raw readback: 0043
|
|
Lane 07 nibble 0 adjusted value (pre nibble): 0043
|
|
Lane 07 nibble 0 adjusted value (post nibble): 0043
|
|
Lane 08 nibble 0 raw readback: 0031
|
|
Lane 08 nibble 0 adjusted value (pre nibble): 0031
|
|
Lane 08 nibble 0 adjusted value (post nibble): 0031
|
|
original critical gross delay: 0
|
|
new critical gross delay: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
DIMM 1 RttWr: 0
|
|
fam15_receiver_enable_training_seed: using seed: 003f
|
|
fam15_receiver_enable_training_seed: using seed: 003f
|
|
TrainRcvrEn: Status 2205
|
|
TrainRcvrEn: ErrStatus 0
|
|
TrainRcvrEn: ErrCode 0
|
|
TrainRcvrEn: Done
|
|
|
|
activate_spd_rom() for node 00
|
|
enable_spd_node0()
|
|
SetTargetFreq: Start
|
|
SetTargetFreq: Node 0: New frequency code: 0006
|
|
ChangeMemClk: Start
|
|
set_2t_configuration: Start
|
|
set_2t_configuration: Done
|
|
mct_BeforePlatformSpec: Start
|
|
mct_BeforePlatformSpec: Done
|
|
mct_PlatformSpec: Start
|
|
Programmed DCT 0 timing/termination pattern 00000000 10112222
|
|
mct_PlatformSpec: Done
|
|
ChangeMemClk: Done
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: done training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
Preparing to send DCT 0 DIMM 1 RC10: 00 (F2xA8: 00000c00)
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 1
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC2: 04
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 1
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC8: 00
|
|
SetTargetFreq: Done
|
|
SPD2ndTiming: Start
|
|
SPD2ndTiming: Done
|
|
mct_BeforeDramInit_Prod_D: Start
|
|
mct_ProgramODT_D: Start
|
|
Programmed DCT 0 ODT pattern 00000000 00000000 00000000 08020000
|
|
mct_ProgramODT_D: Done
|
|
mct_BeforeDramInit_Prod_D: Done
|
|
mct_DramInit_Sw_D: Start
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR3 control word 004c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR0 control word 00401558
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR3 control word 006c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR0 control word 00601558
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_DramInit_Sw_D: Done
|
|
AgesaHwWlPhase1: training nibble 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
DIMM 1 RttWr: 0
|
|
Programmed DCT 0 write levelling ODT pattern 00000002 from DIMM 1 data
|
|
Lane 00 scaled delay: 0044
|
|
Lane 00 new seed: 0044
|
|
Lane 01 scaled delay: 0044
|
|
Lane 01 new seed: 0044
|
|
Lane 02 scaled delay: 0044
|
|
Lane 02 new seed: 0044
|
|
Lane 03 scaled delay: 0044
|
|
Lane 03 new seed: 0044
|
|
Lane 04 scaled delay: 0044
|
|
Lane 04 new seed: 0044
|
|
Lane 05 scaled delay: 0044
|
|
Lane 05 new seed: 0044
|
|
Lane 06 scaled delay: 0044
|
|
Lane 06 new seed: 0044
|
|
Lane 07 scaled delay: 0044
|
|
Lane 07 new seed: 0044
|
|
Lane 08 scaled delay: 0044
|
|
Lane 08 new seed: 0044
|
|
Lane 00 nibble 0 raw readback: 0048
|
|
Lane 00 nibble 0 adjusted value (pre nibble): 0048
|
|
Lane 00 nibble 0 adjusted value (post nibble): 0048
|
|
Lane 01 nibble 0 raw readback: 0046
|
|
Lane 01 nibble 0 adjusted value (pre nibble): 0046
|
|
Lane 01 nibble 0 adjusted value (post nibble): 0046
|
|
Lane 02 nibble 0 raw readback: 0041
|
|
Lane 02 nibble 0 adjusted value (pre nibble): 0041
|
|
Lane 02 nibble 0 adjusted value (post nibble): 0041
|
|
Lane 03 nibble 0 raw readback: 003c
|
|
Lane 03 nibble 0 adjusted value (pre nibble): 003c
|
|
Lane 03 nibble 0 adjusted value (post nibble): 003c
|
|
Lane 04 nibble 0 raw readback: 0039
|
|
Lane 04 nibble 0 adjusted value (pre nibble): 0039
|
|
Lane 04 nibble 0 adjusted value (post nibble): 0039
|
|
Lane 05 nibble 0 raw readback: 0040
|
|
Lane 05 nibble 0 adjusted value (pre nibble): 0040
|
|
Lane 05 nibble 0 adjusted value (post nibble): 0040
|
|
Lane 06 nibble 0 raw readback: 0047
|
|
Lane 06 nibble 0 adjusted value (pre nibble): 0047
|
|
Lane 06 nibble 0 adjusted value (post nibble): 0047
|
|
Lane 07 nibble 0 raw readback: 004b
|
|
Lane 07 nibble 0 adjusted value (pre nibble): 004b
|
|
Lane 07 nibble 0 adjusted value (post nibble): 004b
|
|
Lane 08 nibble 0 raw readback: 0035
|
|
Lane 08 nibble 0 adjusted value (pre nibble): 0035
|
|
Lane 08 nibble 0 adjusted value (post nibble): 0035
|
|
original critical gross delay: 0
|
|
new critical gross delay: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
DIMM 1 RttWr: 0
|
|
SetTargetFreq: Start
|
|
SetTargetFreq: Node 0: New frequency code: 000a
|
|
ChangeMemClk: Start
|
|
set_2t_configuration: Start
|
|
set_2t_configuration: Done
|
|
mct_BeforePlatformSpec: Start
|
|
mct_BeforePlatformSpec: Done
|
|
mct_PlatformSpec: Start
|
|
Programmed DCT 0 timing/termination pattern 00393c39 20112222
|
|
mct_PlatformSpec: Done
|
|
ChangeMemClk: Done
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: done training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
Preparing to send DCT 0 DIMM 1 RC10: 01 (F2xA8: 00000c00)
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 0
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC2: 00
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 0
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC8: 00
|
|
SetTargetFreq: Done
|
|
SPD2ndTiming: Start
|
|
SPD2ndTiming: Done
|
|
mct_BeforeDramInit_Prod_D: Start
|
|
mct_ProgramODT_D: Start
|
|
Programmed DCT 0 ODT pattern 00000000 00000000 00000000 08020000
|
|
mct_ProgramODT_D: Done
|
|
mct_BeforeDramInit_Prod_D: Done
|
|
mct_DramInit_Sw_D: Start
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480088
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR3 control word 004c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR0 control word 00401958
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680088
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR3 control word 006c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR0 control word 00601958
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_DramInit_Sw_D: Done
|
|
AgesaHwWlPhase1: training nibble 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480088
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680088
|
|
DIMM 1 RttWr: 0
|
|
Programmed DCT 0 write levelling ODT pattern 00000002 from DIMM 1 data
|
|
Lane 00 scaled delay: 0055
|
|
Lane 00 new seed: 0055
|
|
Lane 01 scaled delay: 0052
|
|
Lane 01 new seed: 0052
|
|
Lane 02 scaled delay: 004b
|
|
Lane 02 new seed: 004b
|
|
Lane 03 scaled delay: 0045
|
|
Lane 03 new seed: 0045
|
|
Lane 04 scaled delay: 0041
|
|
Lane 04 new seed: 0041
|
|
Lane 05 scaled delay: 004a
|
|
Lane 05 new seed: 004a
|
|
Lane 06 scaled delay: 0053
|
|
Lane 06 new seed: 0053
|
|
Lane 07 scaled delay: 0059
|
|
Lane 07 new seed: 0059
|
|
Lane 08 scaled delay: 003b
|
|
Lane 08 new seed: 003b
|
|
Lane 00 nibble 0 raw readback: 0056
|
|
Lane 00 nibble 0 adjusted value (pre nibble): 0056
|
|
Lane 00 nibble 0 adjusted value (post nibble): 0056
|
|
Lane 01 nibble 0 raw readback: 0052
|
|
Lane 01 nibble 0 adjusted value (pre nibble): 0052
|
|
Lane 01 nibble 0 adjusted value (post nibble): 0052
|
|
Lane 02 nibble 0 raw readback: 004c
|
|
Lane 02 nibble 0 adjusted value (pre nibble): 004c
|
|
Lane 02 nibble 0 adjusted value (post nibble): 004c
|
|
Lane 03 nibble 0 raw readback: 0045
|
|
Lane 03 nibble 0 adjusted value (pre nibble): 0045
|
|
Lane 03 nibble 0 adjusted value (post nibble): 0045
|
|
Lane 04 nibble 0 raw readback: 0042
|
|
Lane 04 nibble 0 adjusted value (pre nibble): 0042
|
|
Lane 04 nibble 0 adjusted value (post nibble): 0042
|
|
Lane 05 nibble 0 raw readback: 004a
|
|
Lane 05 nibble 0 adjusted value (pre nibble): 004a
|
|
Lane 05 nibble 0 adjusted value (post nibble): 004a
|
|
Lane 06 nibble 0 raw readback: 0053
|
|
Lane 06 nibble 0 adjusted value (pre nibble): 0053
|
|
Lane 06 nibble 0 adjusted value (post nibble): 0053
|
|
Lane 07 nibble 0 raw readback: 0058
|
|
Lane 07 nibble 0 adjusted value (pre nibble): 0058
|
|
Lane 07 nibble 0 adjusted value (post nibble): 0058
|
|
Lane 08 nibble 0 raw readback: 003c
|
|
Lane 08 nibble 0 adjusted value (pre nibble): 003c
|
|
Lane 08 nibble 0 adjusted value (post nibble): 003c
|
|
original critical gross delay: 0
|
|
new critical gross delay: 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480088
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680088
|
|
DIMM 1 RttWr: 0
|
|
SetTargetFreq: Start
|
|
SetTargetFreq: Node 0: New frequency code: 000e
|
|
ChangeMemClk: Start
|
|
set_2t_configuration: Start
|
|
set_2t_configuration: Done
|
|
mct_BeforePlatformSpec: Start
|
|
mct_BeforePlatformSpec: Done
|
|
mct_PlatformSpec: Start
|
|
Programmed DCT 0 timing/termination pattern 00373a37 30112222
|
|
mct_PlatformSpec: Done
|
|
ChangeMemClk: Done
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: done training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
Preparing to send DCT 0 DIMM 1 RC10: 02 (F2xA8: 00000c00)
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 0
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC2: 00
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 0
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC8: 00
|
|
SetTargetFreq: Done
|
|
SPD2ndTiming: Start
|
|
SPD2ndTiming: Done
|
|
mct_BeforeDramInit_Prod_D: Start
|
|
mct_ProgramODT_D: Start
|
|
Programmed DCT 0 ODT pattern 00000000 00000000 00000000 08020000
|
|
mct_ProgramODT_D: Done
|
|
mct_BeforeDramInit_Prod_D: Done
|
|
mct_DramInit_Sw_D: Start
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480490
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR3 control word 004c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR0 control word 00401b58
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680490
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR3 control word 006c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR0 control word 00601b58
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_DramInit_Sw_D: Done
|
|
AgesaHwWlPhase1: training nibble 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480490
|
|
DIMM 1 RttWr: 2
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680490
|
|
DIMM 1 RttWr: 2
|
|
Programmed DCT 0 write levelling ODT pattern 00000002 from DIMM 1 data
|
|
Lane 00 scaled delay: 0063
|
|
Lane 00 new seed: 0063
|
|
Lane 01 scaled delay: 005e
|
|
Lane 01 new seed: 005e
|
|
Lane 02 scaled delay: 0057
|
|
Lane 02 new seed: 0057
|
|
Lane 03 scaled delay: 004e
|
|
Lane 03 new seed: 004e
|
|
Lane 04 scaled delay: 004a
|
|
Lane 04 new seed: 004a
|
|
Lane 05 scaled delay: 0054
|
|
Lane 05 new seed: 0054
|
|
Lane 06 scaled delay: 005f
|
|
Lane 06 new seed: 005f
|
|
Lane 07 scaled delay: 0066
|
|
Lane 07 new seed: 0066
|
|
Lane 08 scaled delay: 0043
|
|
Lane 08 new seed: 0043
|
|
Lane 00 nibble 0 raw readback: 0021
|
|
Lane 00 nibble 0 adjusted value (pre nibble): 0061
|
|
Lane 00 nibble 0 adjusted value (post nibble): 0061
|
|
Lane 01 nibble 0 raw readback: 005d
|
|
Lane 01 nibble 0 adjusted value (pre nibble): 005d
|
|
Lane 01 nibble 0 adjusted value (post nibble): 005d
|
|
Lane 02 nibble 0 raw readback: 0055
|
|
Lane 02 nibble 0 adjusted value (pre nibble): 0055
|
|
Lane 02 nibble 0 adjusted value (post nibble): 0055
|
|
Lane 03 nibble 0 raw readback: 004c
|
|
Lane 03 nibble 0 adjusted value (pre nibble): 004c
|
|
Lane 03 nibble 0 adjusted value (post nibble): 004c
|
|
Lane 04 nibble 0 raw readback: 0047
|
|
Lane 04 nibble 0 adjusted value (pre nibble): 0047
|
|
Lane 04 nibble 0 adjusted value (post nibble): 0047
|
|
Lane 05 nibble 0 raw readback: 0052
|
|
Lane 05 nibble 0 adjusted value (pre nibble): 0052
|
|
Lane 05 nibble 0 adjusted value (post nibble): 0052
|
|
Lane 06 nibble 0 raw readback: 005e
|
|
Lane 06 nibble 0 adjusted value (pre nibble): 005e
|
|
Lane 06 nibble 0 adjusted value (post nibble): 005e
|
|
Lane 07 nibble 0 raw readback: 0024
|
|
Lane 07 nibble 0 adjusted value (pre nibble): 0064
|
|
Lane 07 nibble 0 adjusted value (post nibble): 0064
|
|
Lane 08 nibble 0 raw readback: 0040
|
|
Lane 08 nibble 0 adjusted value (pre nibble): 0040
|
|
Lane 08 nibble 0 adjusted value (post nibble): 0040
|
|
original critical gross delay: 0
|
|
new critical gross delay: 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480490
|
|
DIMM 1 RttWr: 2
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680490
|
|
DIMM 1 RttWr: 2
|
|
fam15_receiver_enable_training_seed: using seed: 003f
|
|
fam15_receiver_enable_training_seed: using seed: 003f
|
|
TrainRcvrEn: Status 2205
|
|
TrainRcvrEn: ErrStatus 0
|
|
TrainRcvrEn: ErrCode 0
|
|
TrainRcvrEn: Done
|
|
|
|
TrainDQSReceiverEnCyc_D_Fam15: lane 0 failed to train! Training for receiver 2 on DCT 0 aborted
|
|
TrainDQSReceiverEnCyc: Status 2205
|
|
TrainDQSReceiverEnCyc: TrainErrors 44000
|
|
TrainDQSReceiverEnCyc: ErrStatus 44000
|
|
TrainDQSReceiverEnCyc: ErrCode 0
|
|
TrainDQSReceiverEnCyc: Done
|
|
|
|
DIMM training FAILED! Restarting system...
|
|
|
|
coreboot-4.5-1097-g610d1c6 Thu Mar 2 19:40:30 UTC 2017 romstage starting...
|
|
Initial stack pointer: 000dffc8
|
|
CPU APICID 00 start flag set
|
|
BSP Family_Model: 00600f12
|
|
*sysinfo range: [000c2d20,000cd28c]
|
|
bsp_apicid = 00
|
|
cpu_init_detectedx = 00000000
|
|
sb700 reset flags: 0004
|
|
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
|
|
CBFS: Locating 'microcode_amd.bin'
|
|
CBFS: Found @ offset 6be80 size 318c
|
|
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
|
|
CBFS: Locating 'microcode_amd_fam15h.bin'
|
|
CBFS: Found @ offset 2da40 size 1ec4
|
|
[microcode] patch id to apply = 0x0600063d
|
|
[microcode] updated to patch id = 0x0600063d success
|
|
cpuSetAMDMSR done
|
|
Enter amd_ht_init()
|
|
Forcing HT links to isochronous mode due to enabled IOMMU
|
|
Exit amd_ht_init()
|
|
amd_ht_fixup()
|
|
cpuSetAMDPCI 00 done
|
|
Prep FID/VID Node:00
|
|
F3x80: e20be281
|
|
F3x84: 01e200e2
|
|
F3xD4: c3312f21
|
|
F3xD8: 03000016
|
|
F3xDC: 05475634
|
|
core0 started:
|
|
sr5650_early_setup()
|
|
get_cpu_rev EAX=0x600f12.
|
|
CPU Rev is Fam 15.
|
|
NB Revision is A12.
|
|
fam10_optimization()
|
|
sr5650_por_init
|
|
Enabling IOMMU
|
|
sb700_early_setup()
|
|
sb700_devices_por_init()
|
|
sb700_devices_por_init(): SMBus Device, BDF:0-20-0
|
|
SMBus controller enabled, sb revision is A15
|
|
sb700_devices_por_init: Disabling ISA DMA support
|
|
sb700_devices_por_init(): IDE Device, BDF:0-20-1
|
|
sb700_devices_por_init(): LPC Device, BDF:0-20-3
|
|
sb700_devices_por_init(): P2P Bridge, BDF:0-20-4
|
|
sb700_devices_por_init(): SATA Device, BDF:0-17-0
|
|
sb700_pmio_por_init()
|
|
start_other_cores()
|
|
init node: 00 cores: 05 pass 1
|
|
Start other core - nodeid: 00 cores: 05
|
|
get_boot_apic_id: using 2 as APIC ID for node 0, core 2
|
|
get_boot_apic_id: using 4 as APIC ID for node 0, core 4
|
|
started ap apicid: get_boot_apic_id: using 1 as APIC ID for node 0, core 1
|
|
* AP 01started
|
|
get_boot_apic_id: using 2 as APIC ID for node 0, core 2
|
|
* AP 02started
|
|
get_boot_apic_id: using 3 as APIC ID for node 0, core 3
|
|
* AP 03started
|
|
get_boot_apic_id: using 4 as APIC ID for node 0, core 4
|
|
* AP 04started
|
|
get_boot_apic_id: using 5 as APIC ID for node 0, core 5
|
|
* AP 05started
|
|
|
|
|
|
Begin FIDVID MSR 0xc0010071 0x5aca009e 0x38023411
|
|
End FIDVIDMSR 0xc0010071 0x5aca009e 0x38023411
|
|
sr5650_htinit: Node 0 Link 2, HT freq=e.
|
|
sr5650_htinit: HT3 mode
|
|
Node 00 DIMM voltage set to index 00
|
|
Node 01 DIMM voltage set to index 00
|
|
stopped ap apicid: get_boot_apic_id: using 1 as APIC ID for node 0, core 1
|
|
* AP 01stopped
|
|
get_boot_apic_id: using 2 as APIC ID for node 0, core 2
|
|
* AP 02stopped
|
|
get_boot_apic_id: using 3 as APIC ID for node 0, core 3
|
|
* AP 03stopped
|
|
get_boot_apic_id: using 4 as APIC ID for node 0, core 4
|
|
* AP 04stopped
|
|
get_boot_apic_id: using 5 as APIC ID for node 0, core 5
|
|
* AP 05stopped
|
|
|
|
fill_mem_ctrl() detected 1 nodes
|
|
raminit_amdmct()
|
|
raminit_amdmct begin:
|
|
mctAutoInitMCT_D: mct_init Node 0
|
|
mctAutoInitMCT_D: mct_InitialMCT_D
|
|
mct_InitialMCT_D: mct_ForceNBPState0_En_Fam15
|
|
mctAutoInitMCT_D: mctSMBhub_Init
|
|
activate_spd_rom() for node 00
|
|
enable_spd_node0()
|
|
mctAutoInitMCT_D: mct_preInitDCT
|
|
DIMMPresence: DIMMValid=4
|
|
DIMMPresence: DIMMPresent=4
|
|
DIMMPresence: RegDIMMPresent=4
|
|
DIMMPresence: LRDIMMPresent=0
|
|
DIMMPresence: DimmECCPresent=4
|
|
DIMMPresence: DimmPARPresent=0
|
|
DIMMPresence: Dimmx4Present=4
|
|
DIMMPresence: Dimmx8Present=0
|
|
DIMMPresence: Dimmx16Present=0
|
|
DIMMPresence: DimmPlPresent=0
|
|
DIMMPresence: DimmDRPresent=4
|
|
DIMMPresence: DimmQRPresent=0
|
|
DIMMPresence: DATAload[0]=2
|
|
DIMMPresence: MAload[0]=20
|
|
DIMMPresence: MAdimms[0]=1
|
|
DIMMPresence: DATAload[1]=0
|
|
DIMMPresence: MAload[1]=0
|
|
DIMMPresence: MAdimms[1]=0
|
|
DIMMPresence: Status 2005
|
|
DIMMPresence: ErrStatus 0
|
|
DIMMPresence: ErrCode 0
|
|
DIMMPresence: Done
|
|
|
|
DCTPreInit_D: mct_DIMMPresence Done
|
|
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
|
|
CBFS: Locating 's3nv'
|
|
CBFS: Found @ offset 2fec0 size 10000
|
|
CBFS: 'Master Header Locator' located CBFS at [100:1fffc0)
|
|
CBFS: Locating 's3nv'
|
|
CBFS: Found @ offset 2fec0 size 10000
|
|
mctAutoInitMCT_D: mct_init Node 1
|
|
mctAutoInitMCT_D: mct_init Node 2
|
|
mctAutoInitMCT_D: mct_init Node 3
|
|
mctAutoInitMCT_D: mct_init Node 4
|
|
mctAutoInitMCT_D: mct_init Node 5
|
|
mctAutoInitMCT_D: mct_init Node 6
|
|
mctAutoInitMCT_D: mct_init Node 7
|
|
mctAutoInitMCT_D: DIMMSetVoltage
|
|
Node 00 DIMM voltage set to index 01
|
|
mctAutoInitMCT_D: mctSMBhub_Init
|
|
activate_spd_rom() for node 00
|
|
enable_spd_node0()
|
|
mctAutoInitMCT_D: mct_initDCT
|
|
SPDCalcWidth: Status 2005
|
|
SPDCalcWidth: ErrStatus 0
|
|
SPDCalcWidth: ErrCode 0
|
|
SPDCalcWidth: Done
|
|
DCTInit_D: mct_SPDCalcWidth Done
|
|
AutoCycTiming_D: Start
|
|
mct_MaxLoadFreq: 1 registered DIMM on 1350mV channel; limiting to DDR3-1600
|
|
GetPresetmaxF_D: Start
|
|
GetPresetmaxF_D: Done
|
|
SPDGetTCL_D: Start
|
|
SPDGetTCL_D: DIMMCASL 5
|
|
SPDGetTCL_D: DIMMAutoSpeed 4
|
|
SPDGetTCL_D: Status 2005
|
|
SPDGetTCL_D: ErrStatus 0
|
|
SPDGetTCL_D: ErrCode 0
|
|
SPDGetTCL_D: Done
|
|
|
|
SPD2ndTiming: Start
|
|
SPD2ndTiming: Done
|
|
AutoCycTiming: Status 2005
|
|
AutoCycTiming: ErrStatus 0
|
|
AutoCycTiming: ErrCode 0
|
|
AutoCycTiming: Done
|
|
|
|
DCTInit_D: AutoCycTiming_D Done
|
|
SPDSetBanks: CSPresent c
|
|
SPDSetBanks: Status 2005
|
|
SPDSetBanks: ErrStatus 0
|
|
SPDSetBanks: ErrCode 0
|
|
SPDSetBanks: Done
|
|
|
|
AfterStitch pDCTstat->NodeSysBase = 0
|
|
mct_AfterStitchMemory: pDCTstat->NodeSysLimit = 3ffffff
|
|
StitchMemory: Status 2005
|
|
StitchMemory: ErrStatus 0
|
|
StitchMemory: ErrCode 0
|
|
StitchMemory: Done
|
|
|
|
InterleaveBanks_D: Status 2005
|
|
InterleaveBanks_D: ErrStatus 0
|
|
InterleaveBanks_D: ErrCode 0
|
|
InterleaveBanks_D: Done
|
|
|
|
AutoConfig_D: DramControl: 00002a06
|
|
AutoConfig_D: DramTimingLo: 00000000
|
|
AutoConfig_D: DramConfigMisc: 00000000
|
|
AutoConfig_D: DramConfigMisc2: 00000000
|
|
AutoConfig_D: DramConfigLo: 03082000
|
|
AutoConfig_D: DramConfigHi: 0f090084
|
|
InitDDRPhy: Start
|
|
InitDDRPhy: Done
|
|
mct_SetDramConfigHi_D: Start
|
|
set_2t_configuration: Start
|
|
set_2t_configuration: Done
|
|
mct_BeforePlatformSpec: Start
|
|
mct_BeforePlatformSpec: Done
|
|
mct_PlatformSpec: Start
|
|
Programmed DCT 0 timing/termination pattern 00000000 00112222
|
|
mct_PlatformSpec: Done
|
|
mct_SetDramConfigHi_D: DramConfigHi: 0f090084
|
|
*
|
|
mct_SetDramConfigHi_D: Done
|
|
mct_EarlyArbEn_D: Start
|
|
mct_EarlyArbEn_D: Done
|
|
AutoConfig: Status 2005
|
|
AutoConfig: ErrStatus 0
|
|
AutoConfig: ErrCode 0
|
|
AutoConfig: Done
|
|
|
|
DCTInit_D: AutoConfig_D Done
|
|
DCTInit_D: PlatformSpec_D Done
|
|
DCTFinalInit_D: StartupDCT_D Start
|
|
mct_BeforeDramInit_Prod_D: Start
|
|
mct_ProgramODT_D: Start
|
|
Programmed DCT 0 ODT pattern 00000000 00000000 00000000 08020000
|
|
mct_ProgramODT_D: Done
|
|
mct_BeforeDramInit_Prod_D: Done
|
|
mct_DramInit_Sw_D: Start
|
|
mct_DCTAccessDone: Start
|
|
mct_DCTAccessDone: Done
|
|
mct_DramControlReg_Init_D: Start
|
|
mct_DramControlReg_Init_D: F2xA8: 00000c00
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC0: 02
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC1: 00
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 1
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC2: 04
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC3: 05
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC4: 05
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC5: 05
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC6: 00
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC7: 00
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 1
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC8: 00
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC9: 0d
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC10: 00
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC11: 01
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC12: 00
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC13: 00
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC14: 00
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC15: 00
|
|
mct_DramControlReg_Init_D: Done
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR3 control word 004c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR0 control word 00401318
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR3 control word 006c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR0 control word 00601318
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_SendZQCmd: Start
|
|
mct_SendZQCmd: Done
|
|
mct_SendZQCmd: Start
|
|
mct_SendZQCmd: Done
|
|
mct_DCTAccessDone: Start
|
|
mct_DCTAccessDone: Done
|
|
mct_DramInit_Sw_D: Done
|
|
DCTFinalInit_D: StartupDCT_D Done
|
|
mctAutoInitMCT_D: SyncDCTsReady_D
|
|
mctAutoInitMCT_D: HTMemMapInit_D
|
|
Node: 00 base: 00 limit: 3ffffff BottomIO: c00000
|
|
Node: 00 base: 03 limit: 43fffff
|
|
Node: 01 base: 00 limit: 00
|
|
Node: 02 base: 00 limit: 00
|
|
Node: 03 base: 00 limit: 00
|
|
Node: 04 base: 00 limit: 00
|
|
Node: 05 base: 00 limit: 00
|
|
Node: 06 base: 00 limit: 00
|
|
Node: 07 base: 00 limit: 00
|
|
mctAutoInitMCT_D: mctHookAfterCPU
|
|
mctAutoInitMCT_D: DQSTiming_D
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: done training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
activate_spd_rom() for node 00
|
|
enable_spd_node0()
|
|
AgesaHwWlPhase1: training nibble 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
DIMM 1 RttWr: 0
|
|
Programmed DCT 0 write levelling ODT pattern 00000002 from DIMM 1 data
|
|
Lane 00 initial seed: 003e
|
|
Lane 01 initial seed: 003e
|
|
Lane 02 initial seed: 003e
|
|
Lane 03 initial seed: 003e
|
|
Lane 04 initial seed: 003e
|
|
Lane 05 initial seed: 003e
|
|
Lane 06 initial seed: 003e
|
|
Lane 07 initial seed: 003e
|
|
Lane 08 initial seed: 003e
|
|
Lane 00 nibble 0 raw readback: 0042
|
|
Lane 00 nibble 0 adjusted value (pre nibble): 0042
|
|
Lane 00 nibble 0 adjusted value (post nibble): 0042
|
|
Lane 01 nibble 0 raw readback: 0040
|
|
Lane 01 nibble 0 adjusted value (pre nibble): 0040
|
|
Lane 01 nibble 0 adjusted value (post nibble): 0040
|
|
Lane 02 nibble 0 raw readback: 003c
|
|
Lane 02 nibble 0 adjusted value (pre nibble): 003c
|
|
Lane 02 nibble 0 adjusted value (post nibble): 003c
|
|
Lane 03 nibble 0 raw readback: 0037
|
|
Lane 03 nibble 0 adjusted value (pre nibble): 0037
|
|
Lane 03 nibble 0 adjusted value (post nibble): 0037
|
|
Lane 04 nibble 0 raw readback: 0035
|
|
Lane 04 nibble 0 adjusted value (pre nibble): 0035
|
|
Lane 04 nibble 0 adjusted value (post nibble): 0035
|
|
Lane 05 nibble 0 raw readback: 003b
|
|
Lane 05 nibble 0 adjusted value (pre nibble): 003b
|
|
Lane 05 nibble 0 adjusted value (post nibble): 003b
|
|
Lane 06 nibble 0 raw readback: 0040
|
|
Lane 06 nibble 0 adjusted value (pre nibble): 0040
|
|
Lane 06 nibble 0 adjusted value (post nibble): 0040
|
|
Lane 07 nibble 0 raw readback: 0043
|
|
Lane 07 nibble 0 adjusted value (pre nibble): 0043
|
|
Lane 07 nibble 0 adjusted value (post nibble): 0043
|
|
Lane 08 nibble 0 raw readback: 0031
|
|
Lane 08 nibble 0 adjusted value (pre nibble): 0031
|
|
Lane 08 nibble 0 adjusted value (post nibble): 0031
|
|
original critical gross delay: 0
|
|
new critical gross delay: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
DIMM 1 RttWr: 0
|
|
fam15_receiver_enable_training_seed: using seed: 003f
|
|
fam15_receiver_enable_training_seed: using seed: 003f
|
|
TrainRcvrEn: Status 2205
|
|
TrainRcvrEn: ErrStatus 0
|
|
TrainRcvrEn: ErrCode 0
|
|
TrainRcvrEn: Done
|
|
|
|
activate_spd_rom() for node 00
|
|
enable_spd_node0()
|
|
SetTargetFreq: Start
|
|
SetTargetFreq: Node 0: New frequency code: 0006
|
|
ChangeMemClk: Start
|
|
set_2t_configuration: Start
|
|
set_2t_configuration: Done
|
|
mct_BeforePlatformSpec: Start
|
|
mct_BeforePlatformSpec: Done
|
|
mct_PlatformSpec: Start
|
|
Programmed DCT 0 timing/termination pattern 00000000 10112222
|
|
mct_PlatformSpec: Done
|
|
ChangeMemClk: Done
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: done training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
Preparing to send DCT 0 DIMM 1 RC10: 00 (F2xA8: 00000c00)
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 1
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC2: 04
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 1
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC8: 00
|
|
SetTargetFreq: Done
|
|
SPD2ndTiming: Start
|
|
SPD2ndTiming: Done
|
|
mct_BeforeDramInit_Prod_D: Start
|
|
mct_ProgramODT_D: Start
|
|
Programmed DCT 0 ODT pattern 00000000 00000000 00000000 08020000
|
|
mct_ProgramODT_D: Done
|
|
mct_BeforeDramInit_Prod_D: Done
|
|
mct_DramInit_Sw_D: Start
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR3 control word 004c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR0 control word 00401558
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR3 control word 006c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR0 control word 00601558
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_DramInit_Sw_D: Done
|
|
AgesaHwWlPhase1: training nibble 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
DIMM 1 RttWr: 0
|
|
Programmed DCT 0 write levelling ODT pattern 00000002 from DIMM 1 data
|
|
Lane 00 scaled delay: 0044
|
|
Lane 00 new seed: 0044
|
|
Lane 01 scaled delay: 0044
|
|
Lane 01 new seed: 0044
|
|
Lane 02 scaled delay: 0044
|
|
Lane 02 new seed: 0044
|
|
Lane 03 scaled delay: 0044
|
|
Lane 03 new seed: 0044
|
|
Lane 04 scaled delay: 0044
|
|
Lane 04 new seed: 0044
|
|
Lane 05 scaled delay: 0044
|
|
Lane 05 new seed: 0044
|
|
Lane 06 scaled delay: 0044
|
|
Lane 06 new seed: 0044
|
|
Lane 07 scaled delay: 0044
|
|
Lane 07 new seed: 0044
|
|
Lane 08 scaled delay: 0044
|
|
Lane 08 new seed: 0044
|
|
Lane 00 nibble 0 raw readback: 0048
|
|
Lane 00 nibble 0 adjusted value (pre nibble): 0048
|
|
Lane 00 nibble 0 adjusted value (post nibble): 0048
|
|
Lane 01 nibble 0 raw readback: 0046
|
|
Lane 01 nibble 0 adjusted value (pre nibble): 0046
|
|
Lane 01 nibble 0 adjusted value (post nibble): 0046
|
|
Lane 02 nibble 0 raw readback: 0040
|
|
Lane 02 nibble 0 adjusted value (pre nibble): 0040
|
|
Lane 02 nibble 0 adjusted value (post nibble): 0040
|
|
Lane 03 nibble 0 raw readback: 003b
|
|
Lane 03 nibble 0 adjusted value (pre nibble): 003b
|
|
Lane 03 nibble 0 adjusted value (post nibble): 003b
|
|
Lane 04 nibble 0 raw readback: 0039
|
|
Lane 04 nibble 0 adjusted value (pre nibble): 0039
|
|
Lane 04 nibble 0 adjusted value (post nibble): 0039
|
|
Lane 05 nibble 0 raw readback: 003f
|
|
Lane 05 nibble 0 adjusted value (pre nibble): 003f
|
|
Lane 05 nibble 0 adjusted value (post nibble): 003f
|
|
Lane 06 nibble 0 raw readback: 0046
|
|
Lane 06 nibble 0 adjusted value (pre nibble): 0046
|
|
Lane 06 nibble 0 adjusted value (post nibble): 0046
|
|
Lane 07 nibble 0 raw readback: 004a
|
|
Lane 07 nibble 0 adjusted value (pre nibble): 004a
|
|
Lane 07 nibble 0 adjusted value (post nibble): 004a
|
|
Lane 08 nibble 0 raw readback: 0035
|
|
Lane 08 nibble 0 adjusted value (pre nibble): 0035
|
|
Lane 08 nibble 0 adjusted value (post nibble): 0035
|
|
original critical gross delay: 0
|
|
new critical gross delay: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480080
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640042
|
|
DIMM 1 RttNom: 2
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680080
|
|
DIMM 1 RttWr: 0
|
|
SetTargetFreq: Start
|
|
SetTargetFreq: Node 0: New frequency code: 000a
|
|
ChangeMemClk: Start
|
|
set_2t_configuration: Start
|
|
set_2t_configuration: Done
|
|
mct_BeforePlatformSpec: Start
|
|
mct_BeforePlatformSpec: Done
|
|
mct_PlatformSpec: Start
|
|
Programmed DCT 0 timing/termination pattern 00393c39 20112222
|
|
mct_PlatformSpec: Done
|
|
ChangeMemClk: Done
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: done training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
Preparing to send DCT 0 DIMM 1 RC10: 01 (F2xA8: 00000c00)
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 0
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC2: 00
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 0
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC8: 00
|
|
SetTargetFreq: Done
|
|
SPD2ndTiming: Start
|
|
SPD2ndTiming: Done
|
|
mct_BeforeDramInit_Prod_D: Start
|
|
mct_ProgramODT_D: Start
|
|
Programmed DCT 0 ODT pattern 00000000 00000000 00000000 08020000
|
|
mct_ProgramODT_D: Done
|
|
mct_BeforeDramInit_Prod_D: Done
|
|
mct_DramInit_Sw_D: Start
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480088
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR3 control word 004c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR0 control word 00401958
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680088
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR3 control word 006c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR0 control word 00601958
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_DramInit_Sw_D: Done
|
|
AgesaHwWlPhase1: training nibble 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480088
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680088
|
|
DIMM 1 RttWr: 0
|
|
Programmed DCT 0 write levelling ODT pattern 00000002 from DIMM 1 data
|
|
Lane 00 scaled delay: 0055
|
|
Lane 00 new seed: 0055
|
|
Lane 01 scaled delay: 0052
|
|
Lane 01 new seed: 0052
|
|
Lane 02 scaled delay: 004a
|
|
Lane 02 new seed: 004a
|
|
Lane 03 scaled delay: 0043
|
|
Lane 03 new seed: 0043
|
|
Lane 04 scaled delay: 0041
|
|
Lane 04 new seed: 0041
|
|
Lane 05 scaled delay: 0049
|
|
Lane 05 new seed: 0049
|
|
Lane 06 scaled delay: 0052
|
|
Lane 06 new seed: 0052
|
|
Lane 07 scaled delay: 0057
|
|
Lane 07 new seed: 0057
|
|
Lane 08 scaled delay: 003b
|
|
Lane 08 new seed: 003b
|
|
Lane 00 nibble 0 raw readback: 0057
|
|
Lane 00 nibble 0 adjusted value (pre nibble): 0057
|
|
Lane 00 nibble 0 adjusted value (post nibble): 0057
|
|
Lane 01 nibble 0 raw readback: 0053
|
|
Lane 01 nibble 0 adjusted value (pre nibble): 0053
|
|
Lane 01 nibble 0 adjusted value (post nibble): 0053
|
|
Lane 02 nibble 0 raw readback: 004c
|
|
Lane 02 nibble 0 adjusted value (pre nibble): 004c
|
|
Lane 02 nibble 0 adjusted value (post nibble): 004c
|
|
Lane 03 nibble 0 raw readback: 0045
|
|
Lane 03 nibble 0 adjusted value (pre nibble): 0045
|
|
Lane 03 nibble 0 adjusted value (post nibble): 0045
|
|
Lane 04 nibble 0 raw readback: 0042
|
|
Lane 04 nibble 0 adjusted value (pre nibble): 0042
|
|
Lane 04 nibble 0 adjusted value (post nibble): 0042
|
|
Lane 05 nibble 0 raw readback: 004a
|
|
Lane 05 nibble 0 adjusted value (pre nibble): 004a
|
|
Lane 05 nibble 0 adjusted value (post nibble): 004a
|
|
Lane 06 nibble 0 raw readback: 0054
|
|
Lane 06 nibble 0 adjusted value (pre nibble): 0054
|
|
Lane 06 nibble 0 adjusted value (post nibble): 0054
|
|
Lane 07 nibble 0 raw readback: 0059
|
|
Lane 07 nibble 0 adjusted value (pre nibble): 0059
|
|
Lane 07 nibble 0 adjusted value (post nibble): 0059
|
|
Lane 08 nibble 0 raw readback: 003c
|
|
Lane 08 nibble 0 adjusted value (pre nibble): 003c
|
|
Lane 08 nibble 0 adjusted value (post nibble): 003c
|
|
original critical gross delay: 0
|
|
new critical gross delay: 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480088
|
|
DIMM 1 RttWr: 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 0
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680088
|
|
DIMM 1 RttWr: 0
|
|
SetTargetFreq: Start
|
|
SetTargetFreq: Node 0: New frequency code: 000e
|
|
ChangeMemClk: Start
|
|
set_2t_configuration: Start
|
|
set_2t_configuration: Done
|
|
mct_BeforePlatformSpec: Start
|
|
mct_BeforePlatformSpec: Done
|
|
mct_PlatformSpec: Start
|
|
Programmed DCT 0 timing/termination pattern 00373a37 30112222
|
|
mct_PlatformSpec: Done
|
|
ChangeMemClk: Done
|
|
phyAssistedMemFnceTraining: Start
|
|
phyAssistedMemFnceTraining: training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: done training node 0 DCT 0
|
|
phyAssistedMemFnceTraining: Done
|
|
InitPhyCompensation: DCT 0: Start
|
|
Waiting for predriver calibration to be applied...done!
|
|
InitPhyCompensation: DCT 0: Done
|
|
Preparing to send DCT 0 DIMM 1 RC10: 02 (F2xA8: 00000c00)
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 0
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC2: 00
|
|
fam15h_rdimm_rc2_ibt_code: DCT 0 IBT code: 0
|
|
mct_ControlRC: Preparing to send DCT 0 DIMM 1 RC8: 00
|
|
SetTargetFreq: Done
|
|
SPD2ndTiming: Start
|
|
SPD2ndTiming: Done
|
|
mct_BeforeDramInit_Prod_D: Start
|
|
mct_ProgramODT_D: Start
|
|
Programmed DCT 0 ODT pattern 00000000 00000000 00000000 08020000
|
|
mct_ProgramODT_D: Done
|
|
mct_BeforeDramInit_Prod_D: Done
|
|
mct_DramInit_Sw_D: Start
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480490
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR3 control word 004c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 0 MR0 control word 00401b58
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680490
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR3 control word 006c0000
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
Going to send DCT 0 DIMM 1 rank 1 MR0 control word 00601b58
|
|
mct_SendMrsCmd: Start
|
|
mct_SendMrsCmd: Done
|
|
mct_DramInit_Sw_D: Done
|
|
AgesaHwWlPhase1: training nibble 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480490
|
|
DIMM 1 RttWr: 2
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680490
|
|
DIMM 1 RttWr: 2
|
|
Programmed DCT 0 write levelling ODT pattern 00000002 from DIMM 1 data
|
|
Lane 00 scaled delay: 0064
|
|
Lane 00 new seed: 0064
|
|
Lane 01 scaled delay: 005f
|
|
Lane 01 new seed: 005f
|
|
Lane 02 scaled delay: 0057
|
|
Lane 02 new seed: 0057
|
|
Lane 03 scaled delay: 004e
|
|
Lane 03 new seed: 004e
|
|
Lane 04 scaled delay: 004a
|
|
Lane 04 new seed: 004a
|
|
Lane 05 scaled delay: 0054
|
|
Lane 05 new seed: 0054
|
|
Lane 06 scaled delay: 0061
|
|
Lane 06 new seed: 0061
|
|
Lane 07 scaled delay: 0067
|
|
Lane 07 new seed: 0067
|
|
Lane 08 scaled delay: 0043
|
|
Lane 08 new seed: 0043
|
|
Lane 00 nibble 0 raw readback: 0021
|
|
Lane 00 nibble 0 adjusted value (pre nibble): 0061
|
|
Lane 00 nibble 0 adjusted value (post nibble): 0061
|
|
Lane 01 nibble 0 raw readback: 005d
|
|
Lane 01 nibble 0 adjusted value (pre nibble): 005d
|
|
Lane 01 nibble 0 adjusted value (post nibble): 005d
|
|
Lane 02 nibble 0 raw readback: 0055
|
|
Lane 02 nibble 0 adjusted value (pre nibble): 0055
|
|
Lane 02 nibble 0 adjusted value (post nibble): 0055
|
|
Lane 03 nibble 0 raw readback: 004d
|
|
Lane 03 nibble 0 adjusted value (pre nibble): 004d
|
|
Lane 03 nibble 0 adjusted value (post nibble): 004d
|
|
Lane 04 nibble 0 raw readback: 0047
|
|
Lane 04 nibble 0 adjusted value (pre nibble): 0047
|
|
Lane 04 nibble 0 adjusted value (post nibble): 0047
|
|
Lane 05 nibble 0 raw readback: 0052
|
|
Lane 05 nibble 0 adjusted value (pre nibble): 0052
|
|
Lane 05 nibble 0 adjusted value (post nibble): 0052
|
|
Lane 06 nibble 0 raw readback: 001e
|
|
Lane 06 nibble 0 adjusted value (pre nibble): 005e
|
|
Lane 06 nibble 0 adjusted value (post nibble): 005e
|
|
Lane 07 nibble 0 raw readback: 0025
|
|
Lane 07 nibble 0 adjusted value (pre nibble): 0065
|
|
Lane 07 nibble 0 adjusted value (post nibble): 0065
|
|
Lane 08 nibble 0 raw readback: 0040
|
|
Lane 08 nibble 0 adjusted value (pre nibble): 0040
|
|
Lane 08 nibble 0 adjusted value (post nibble): 0040
|
|
original critical gross delay: 0
|
|
new critical gross delay: 0
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 0 MR1 control word 00440006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 0 MR2 control word 00480490
|
|
DIMM 1 RttWr: 2
|
|
DIMM 1 RttNom: 1
|
|
Going to send DCT 0 DIMM 1 rank 1 MR1 control word 00640006
|
|
DIMM 1 RttNom: 1
|
|
DIMM 1 RttWr: 2
|
|
Going to send DCT 0 DIMM 1 rank 1 MR2 control word 00680490
|
|
DIMM 1 RttWr: 2
|
|
fam15_receiver_enable_training_seed: using seed: 003f
|
|
fam15_receiver_enable_training_seed: using seed: 003f
|
|
TrainRcvrEn: Status 2205
|
|
TrainRcvrEn: ErrStatus 0
|
|
TrainRcvrEn: ErrCode 0
|
|
TrainRcvrEn: Done
|
|
|