[    0.000000] Linux version 4.15.0-54-generic (buildd@lgw01-amd64-014) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #58-Ubuntu SMP Mon Jun 24 10:55:24 UTC 2019 (Ubuntu 4.15.0-54.58-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/linuxmint.seed boot=casper iso-scan/filename= quiet splash --
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007d86bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007d86c000-0x000000007d90afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007d90b000-0x000000007f2adfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f2ae000-0x000000007f32dfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007f32e000-0x000000007f3f1fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f3f2000-0x000000007f3fcfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f3fd000-0x000000007f3fdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f3fe000-0x000000007f715fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f716000-0x00000000821fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff430000-0x00000000ff46ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000037ddfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.70 by EDK II
[    0.000000] efi:  ACPI 2.0=0x7f727000  SMBIOS=0x7f716000  MEMATTR=0x7d86b018 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 3.0 present.
[    0.000000] DMI: LENOVO 20AWS0VK00/20AWS0VK00, BIOS GLETA1WW (2.55) 03/03/2021
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x37de00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7F80000000 write-back
[    0.000000]   1 base 0090000000 mask 7FF0000000 write-combining
[    0.000000]   2 base 0100000000 mask 7F00000000 write-back
[    0.000000]   3 base 0200000000 mask 7E00000000 write-back
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x7f716 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x370b3f000, 0x370b3ffff] PGTABLE
[    0.000000] BRK [0x370b40000, 0x370b40fff] PGTABLE
[    0.000000] BRK [0x370b41000, 0x370b41fff] PGTABLE
[    0.000000] BRK [0x370b42000, 0x370b42fff] PGTABLE
[    0.000000] BRK [0x370b43000, 0x370b43fff] PGTABLE
[    0.000000] BRK [0x370b44000, 0x370b44fff] PGTABLE
[    0.000000] BRK [0x370b45000, 0x370b45fff] PGTABLE
[    0.000000] BRK [0x370b46000, 0x370b46fff] PGTABLE
[    0.000000] BRK [0x370b47000, 0x370b47fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33963000-0x35ca8fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000007F727000 000024 (v02 COREv4)
[    0.000000] ACPI: XSDT 0x000000007F3FDF18 000064 (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[    0.000000] ACPI: FACP 0x000000007F72A990 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200925)
[    0.000000] ACPI: DSDT 0x000000007F727280 003710 (v02 COREv4 COREBOOT 20141018 INTL 20200925)
[    0.000000] ACPI: FACS 0x000000007F727240 000040
[    0.000000] ACPI: FACS 0x000000007F727240 000040
[    0.000000] ACPI: SSDT 0x000000007F72AAB0 001BAD (v02 COREv4 COREBOOT 0000002A CORE 20200925)
[    0.000000] ACPI: MCFG 0x000000007F72C660 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[    0.000000] ACPI: TCPA 0x000000007F72C6A0 000032 (v02 COREv4 COREBOOT 00000000 CORE 20200925)
[    0.000000] ACPI: APIC 0x000000007F72C6E0 00006C (v03 COREv4 COREBOOT 00000000 CORE 20200925)
[    0.000000] ACPI: DMAR 0x000000007F72C750 0000C0 (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[    0.000000] ACPI: HPET 0x000000007F72C810 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200925)
[    0.000000] ACPI: BGRT 0x000000007F3FD018 000038 (v00 INTEL      EDK2 00001720 PTL  00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000037ddfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x37ddd5000-0x37ddfffff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000037ddfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007d86bfff]
[    0.000000]   node   0: [mem 0x000000007d90b000-0x000000007f2adfff]
[    0.000000]   node   0: [mem 0x000000007f3f2000-0x000000007f3fcfff]
[    0.000000]   node   0: [mem 0x000000007f3fe000-0x000000007f715fff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000037ddfffff]
[    0.000000] Reserved but unavailable: 2863 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000037ddfffff]
[    0.000000] On node 0 totalpages: 3134161
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 1067 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8085 pages used for memmap
[    0.000000]   DMA32 zone: 517426 pages, LIFO batch:31
[    0.000000]   Normal zone: 40824 pages used for memmap
[    0.000000]   Normal zone: 2612736 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x0000000080200000-0x00000000821fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7d86c000-0x7d90afff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f2ae000-0x7f32dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f32e000-0x7f3f1fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f3fd000-0x7f3fdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f716000-0x821fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x82200000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed83fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xff42ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff430000-0xff46ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff470000-0xffffffff]
[    0.000000] e820: [mem 0x82200000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 3084121
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/linuxmint.seed boot=casper iso-scan/filename= quiet splash --
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 12176184K/12536644K available (12300K kernel code, 2473K rwdata, 4272K rodata, 2408K init, 2416K bss, 360460K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39216 entries in 154 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.004000] APIC: Switch to symmetric I/O mode setup
[    0.004000] DMAR: Host address width 39
[    0.004000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.004000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[    0.004000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.004000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.004000] DMAR: RMRR base: 0x00000080000000 end: 0x000000821fffff
[    0.004000] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.004000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.004000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.004000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.004000] x2apic enabled
[    0.004000] Switched APIC routing to cluster x2apic.
[    0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.024000] tsc: Fast TSC calibration using PIT
[    0.028000] tsc: Detected 2893.165 MHz processor
[    0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.33 BogoMIPS (lpj=11572660)
[    0.028000] pid_max: default: 32768 minimum: 301
[    0.028000] Security Framework initialized
[    0.028000] Yama: becoming mindful.
[    0.028000] AppArmor: AppArmor initialized
[    0.028000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.028000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.028000] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.028000] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.028000] mce: CPU supports 7 MCE banks
[    0.028000] CPU0: Thermal monitoring enabled (TM1)
[    0.028000] process: using mwait in idle threads
[    0.028000] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.028000] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.028000] Spectre V2 : Mitigation: Full generic retpoline
[    0.028000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.028000] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.028000] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.028000] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.028000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.028000] MDS: Mitigation: Clear CPU buffers
[    0.028000] Freeing SMP alternatives memory: 36K
[    0.033484] TSC deadline timer enabled
[    0.033486] smpboot: CPU0: Intel(R) Core(TM) i7-4600M CPU @ 2.90GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.033537] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.033565] ... version:                3
[    0.033566] ... bit width:              48
[    0.033566] ... generic registers:      4
[    0.033566] ... value mask:             0000ffffffffffff
[    0.033567] ... max period:             00007fffffffffff
[    0.033567] ... fixed-purpose events:   3
[    0.033568] ... event mask:             000000070000000f
[    0.033592] Hierarchical SRCU implementation.
[    0.034332] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.034342] smp: Bringing up secondary CPUs ...
[    0.034397] x86: Booting SMP configuration:
[    0.034398] .... node  #0, CPUs:      #1
[    0.034726] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.034726]  #2 #3
[    0.034726] smp: Brought up 1 node, 4 CPUs
[    0.034726] smpboot: Max logical packages: 1
[    0.034726] smpboot: Total of 4 processors activated (23145.32 BogoMIPS)
[    0.036248] devtmpfs: initialized
[    0.036248] x86/mm: Memory block size: 128MB
[    0.036708] evm: security.selinux
[    0.036708] evm: security.SMACK64
[    0.036709] evm: security.SMACK64EXEC
[    0.036709] evm: security.SMACK64TRANSMUTE
[    0.036709] evm: security.SMACK64MMAP
[    0.036710] evm: security.apparmor
[    0.036710] evm: security.ima
[    0.036710] evm: security.capability
[    0.036722] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.036722] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.036722] pinctrl core: initialized pinctrl subsystem
[    0.036722] RTC time: 16:37:39, date: 03/04/21
[    0.036722] NET: Registered protocol family 16
[    0.036722] audit: initializing netlink subsys (disabled)
[    0.036722] audit: type=2000 audit(1614875859.036:1): state=initialized audit_enabled=0 res=1
[    0.036722] cpuidle: using governor ladder
[    0.036722] cpuidle: using governor menu
[    0.036722] ACPI: bus type PCI registered
[    0.036722] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.036722] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.036722] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.036722] PCI: Using configuration type 1 for base access
[    0.036722] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.036972] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.036972] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.036972] ACPI: Added _OSI(Module Device)
[    0.036972] ACPI: Added _OSI(Processor Device)
[    0.036972] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.036972] ACPI: Added _OSI(Processor Aggregator Device)
[    0.036972] ACPI: Added _OSI(Linux-Dell-Video)
[    0.036972] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.036972] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.036972] ACPI: Executed 1 blocks of module-level executable AML code
[    0.041417] ACPI: EC: EC started
[    0.041417] ACPI: EC: interrupt blocked
[    0.041706] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.041708] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.041709] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.041709] ACPI: Interpreter enabled
[    0.041720] ACPI: (supports S0 S3 S4 S5)
[    0.041721] ACPI: Using IOAPIC for interrupt routing
[    0.041733] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.045507] ACPI: Power Resource [FPWR] (off)
[    0.045705] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.045708] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.045741] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.045748] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.045947] PCI host bridge to bus 0000:00
[    0.045949] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.045950] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.045951] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.045951] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.045952] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.045953] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.045954] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.045955] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.045956] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.045957] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.045958] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.045959] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.045959] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.045960] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.045961] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.045962] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.045963] pci_bus 0000:00: root bus resource [mem 0x82200000-0xefffffff window]
[    0.045964] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.045965] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.045971] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[    0.046050] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[    0.046058] pci 0000:00:02.0: reg 0x10: [mem 0x82400000-0x827fffff 64bit]
[    0.046062] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[    0.046066] pci 0000:00:02.0: reg 0x20: [io  0x1000-0x103f]
[    0.046074] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.046123] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.046129] pci 0000:00:03.0: reg 0x10: [mem 0x82838000-0x8283bfff 64bit]
[    0.046190] pci 0000:00:04.0: [8086:0c03] type 00 class 0x118000
[    0.046198] pci 0000:00:04.0: reg 0x10: [mem 0x82830000-0x82837fff 64bit]
[    0.046286] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.046309] pci 0000:00:14.0: reg 0x10: [mem 0x82820000-0x8282ffff 64bit]
[    0.046374] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.046459] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.046552] pci 0000:00:16.0: reg 0x10: [mem 0x82845000-0x8284500f 64bit]
[    0.046858] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.046945] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
[    0.046965] pci 0000:00:19.0: reg 0x10: [mem 0x82800000-0x8281ffff]
[    0.046974] pci 0000:00:19.0: reg 0x14: [mem 0x82840000-0x82840fff]
[    0.046982] pci 0000:00:19.0: reg 0x18: [io  0x1040-0x105f]
[    0.047045] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.047101] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.047122] pci 0000:00:1a.0: reg 0x10: [mem 0x82842000-0x828423ff]
[    0.047206] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.047271] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.047294] pci 0000:00:1b.0: reg 0x10: [mem 0x8283c000-0x8283ffff 64bit]
[    0.047373] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.047442] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.047526] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.047604] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[    0.047687] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.047769] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.047789] pci 0000:00:1d.0: reg 0x10: [mem 0x82843000-0x828433ff]
[    0.047865] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.047934] pci 0000:00:1f.0: [8086:8c4f] type 00 class 0x060100
[    0.048130] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[    0.048151] pci 0000:00:1f.2: reg 0x10: [io  0x1080-0x1087]
[    0.048160] pci 0000:00:1f.2: reg 0x14: [io  0x1090-0x1093]
[    0.048168] pci 0000:00:1f.2: reg 0x18: [io  0x1088-0x108f]
[    0.048177] pci 0000:00:1f.2: reg 0x1c: [io  0x1094-0x1097]
[    0.048200] pci 0000:00:1f.2: reg 0x20: [io  0x1060-0x107f]
[    0.048208] pci 0000:00:1f.2: reg 0x24: [mem 0x82841000-0x828417ff]
[    0.048251] pci 0000:00:1f.2: PME# supported from D3hot
[    0.048308] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.048329] pci 0000:00:1f.3: reg 0x10: [mem 0x82844000-0x828440ff 64bit]
[    0.048352] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.048547] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
[    0.048656] pci 0000:02:00.0: reg 0x10: [mem 0x82200000-0x82200fff]
[    0.049191] pci 0000:02:00.0: supports D1 D2
[    0.049192] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.060100] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.060106] pci 0000:00:1c.0:   bridge window [mem 0x82200000-0x822fffff]
[    0.060202] pci 0000:03:00.0: [8086:095b] type 00 class 0x028000
[    0.060282] pci 0000:03:00.0: reg 0x10: [mem 0x82300000-0x82301fff 64bit]
[    0.060542] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.072067] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.072072] pci 0000:00:1c.1:   bridge window [mem 0x82300000-0x823fffff]
[    0.072244] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.072312] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.072371] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.072430] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.072494] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.072556] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.072620] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.072684] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.073334] ACPI: EC: interrupt unblocked
[    0.073345] ACPI: EC: event unblocked
[    0.073351] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.073352] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.073485] SCSI subsystem initialized
[    0.073494] libata version 3.00 loaded.
[    0.073494] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.073494] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.073494] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.073494] vgaarb: loaded
[    0.073494] ACPI: bus type USB registered
[    0.073494] usbcore: registered new interface driver usbfs
[    0.073494] usbcore: registered new interface driver hub
[    0.073494] usbcore: registered new device driver usb
[    0.073494] EDAC MC: Ver: 3.0.0
[    0.073494] Registered efivars operations
[    0.073494] PCI: Using ACPI for IRQ routing
[    0.073899] PCI: pci_cache_line_size set to 64 bytes
[    0.074008] e820: reserve RAM buffer [mem 0x7d86c000-0x7fffffff]
[    0.074009] e820: reserve RAM buffer [mem 0x7f2ae000-0x7fffffff]
[    0.074010] e820: reserve RAM buffer [mem 0x7f3fd000-0x7fffffff]
[    0.074010] e820: reserve RAM buffer [mem 0x7f716000-0x7fffffff]
[    0.074011] e820: reserve RAM buffer [mem 0x37de00000-0x37fffffff]
[    0.074071] NetLabel: Initializing
[    0.074071] NetLabel:  domain hash size = 128
[    0.074071] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.074082] NetLabel:  unlabeled traffic allowed by default
[    0.076036] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.076040] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.078065] clocksource: Switched to clocksource hpet
[    0.083836] VFS: Disk quotas dquot_6.6.0
[    0.083850] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.083927] AppArmor: AppArmor Filesystem Enabled
[    0.083948] pnp: PnP ACPI init
[    0.084047] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.084050] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.084051] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.084052] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.084053] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.084054] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.084055] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.084057] system 00:00: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.084061] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.084555] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.084558] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.084591] system 00:02: [io  0x0500-0x05fe] has been reserved
[    0.084592] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.084595] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.084609] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.084633] pnp 00:04: Plug and Play ACPI device, IDs LEN0071 PNP030b (active)
[    0.084652] pnp 00:05: Plug and Play ACPI device, IDs LEN0036 PNP0f13 (active)
[    0.084673] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[    0.084686] pnp: PnP ACPI: found 7 devices
[    0.090937] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.090963] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.090973] pci 0000:00:1c.0:   bridge window [mem 0x82200000-0x822fffff]
[    0.090981] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.090986] pci 0000:00:1c.1:   bridge window [mem 0x82300000-0x823fffff]
[    0.090994] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.090995] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.090996] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.090997] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.090998] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.090999] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.091000] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.091001] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.091002] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.091003] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.091004] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.091005] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.091006] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.091007] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.091008] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.091009] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.091010] pci_bus 0000:00: resource 20 [mem 0x82200000-0xefffffff window]
[    0.091011] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[    0.091012] pci_bus 0000:02: resource 1 [mem 0x82200000-0x822fffff]
[    0.091013] pci_bus 0000:03: resource 1 [mem 0x82300000-0x823fffff]
[    0.091081] NET: Registered protocol family 2
[    0.091244] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.091373] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.091479] TCP: Hash tables configured (established 131072 bind 65536)
[    0.091504] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.091538] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.091591] NET: Registered protocol family 1
[    0.091600] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.092203] PCI: CLS 64 bytes, default 64
[    0.092228] Unpacking initramfs...
[    5.008287] Freeing initrd memory: 36120K
[    5.008339] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    5.008342] software IO TLB [mem 0x77710000-0x7b710000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    5.008544] Scanning for low memory corruption every 60 seconds
[    5.009017] Initialise system trusted keyrings
[    5.009024] Key type blacklist registered
[    5.009065] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    5.009813] zbud: loaded
[    5.010181] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    5.010289] fuse init (API version 7.26)
[    5.011411] Key type asymmetric registered
[    5.011412] Asymmetric key parser 'x509' registered
[    5.011431] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    5.011464] io scheduler noop registered
[    5.011464] io scheduler deadline registered
[    5.011482] io scheduler cfq registered (default)
[    5.012024] pcieport 0000:00:1c.0: AER enabled with IRQ 26
[    5.012050] pcieport 0000:00:1c.1: AER enabled with IRQ 27
[    5.012067] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
[    5.012080] pcieport 0000:00:1c.1: Signaling PME with IRQ 27
[    5.012129] efifb: probing for efifb
[    5.012141] efifb: framebuffer at 0x90000000, using 8128k, total 8128k
[    5.012142] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    5.012142] efifb: scrolling: redraw
[    5.012143] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    5.014867] Console: switching to colour frame buffer device 240x67
[    5.017513] fb0: EFI VGA frame buffer device
[    5.017521] intel_idle: MWAIT substates: 0x42120
[    5.017522] intel_idle: v0.4.1 model 0x3C
[    5.017651] intel_idle: lapic_timer_reliable_states 0xffffffff
[    5.017846] ACPI: AC Adapter [AC] (on-line)
[    5.017891] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2d/PNP0C09:00/PNP0C0E:00/input/input0
[    5.017921] ACPI: Sleep Button [SLPB]
[    5.017947] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2d/PNP0C09:00/PNP0C0D:00/input/input1
[    5.017970] ACPI: Lid Switch [LID]
[    5.017995] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    5.018017] ACPI: Power Button [PWRF]
[    5.019586] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    5.020186] thermal LNXTHERM:00: registered as thermal_zone0
[    5.020187] ACPI: Thermal Zone [THM0] (53 C)
[    5.020902] thermal LNXTHERM:01: registered as thermal_zone1
[    5.020903] ACPI: Thermal Zone [THM1] (27 C)
[    5.021030] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    5.021037] ACPI: Battery Slot [BAT0] (battery absent)
[    5.021149] ACPI: Battery Slot [BAT1] (battery absent)
[    5.022854] Linux agpgart interface v0.103
[    5.028060] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[    5.092579] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
[    5.092604] tpm tpm0: TPM is disabled/deactivated (0x6)
[    5.094182] loop: module loaded
[    5.094310] libphy: Fixed MDIO Bus: probed
[    5.094311] tun: Universal TUN/TAP device driver, 1.6
[    5.094349] PPP generic driver version 2.4.2
[    5.094382] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.094383] ehci-pci: EHCI PCI platform driver
[    5.094511] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    5.094515] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    5.094531] ehci-pci 0000:00:1a.0: debug port 2
[    5.098428] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    5.098440] ehci-pci 0000:00:1a.0: irq 16, io mem 0x82842000
[    5.112022] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    5.112058] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.112060] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.112061] usb usb1: Product: EHCI Host Controller
[    5.112062] usb usb1: Manufacturer: Linux 4.15.0-54-generic ehci_hcd
[    5.112063] usb usb1: SerialNumber: 0000:00:1a.0
[    5.112167] hub 1-0:1.0: USB hub found
[    5.112171] hub 1-0:1.0: 2 ports detected
[    5.112360] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    5.112365] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    5.112379] ehci-pci 0000:00:1d.0: debug port 2
[    5.116279] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    5.116287] ehci-pci 0000:00:1d.0: irq 23, io mem 0x82843000
[    5.132021] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    5.132044] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    5.132045] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.132046] usb usb2: Product: EHCI Host Controller
[    5.132047] usb usb2: Manufacturer: Linux 4.15.0-54-generic ehci_hcd
[    5.132048] usb usb2: SerialNumber: 0000:00:1d.0
[    5.132142] hub 2-0:1.0: USB hub found
[    5.132146] hub 2-0:1.0: 2 ports detected
[    5.132222] ehci-platform: EHCI generic platform driver
[    5.132229] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.132231] ohci-pci: OHCI PCI platform driver
[    5.132236] ohci-platform: OHCI generic platform driver
[    5.132240] uhci_hcd: USB Universal Host Controller Interface driver
[    5.132367] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    5.132370] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    5.133472] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    5.133476] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    5.133593] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    5.133594] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.133595] usb usb3: Product: xHCI Host Controller
[    5.133595] usb usb3: Manufacturer: Linux 4.15.0-54-generic xhci-hcd
[    5.133596] usb usb3: SerialNumber: 0000:00:14.0
[    5.133701] hub 3-0:1.0: USB hub found
[    5.133724] hub 3-0:1.0: 15 ports detected
[    5.133965] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    5.133967] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    5.133968] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    5.133999] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    5.134000] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.134001] usb usb4: Product: xHCI Host Controller
[    5.134002] usb usb4: Manufacturer: Linux 4.15.0-54-generic xhci-hcd
[    5.134003] usb usb4: SerialNumber: 0000:00:14.0
[    5.134103] hub 4-0:1.0: USB hub found
[    5.134120] hub 4-0:1.0: 6 ports detected
[    5.134332] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    5.136446] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.136449] serio: i8042 AUX port at 0x60,0x64 irq 12
[    5.136592] mousedev: PS/2 mouse device common for all mice
[    5.136878] rtc_cmos 00:03: RTC can wake from S4
[    5.137028] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    5.137059] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    5.137063] i2c /dev entries driver
[    5.137095] device-mapper: uevent: version 1.0.3
[    5.137151] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    5.137155] intel_pstate: Intel P-state driver initializing
[    5.137393] ledtrig-cpu: registered to indicate activity on CPUs
[    5.137395] EFI Variables Facility v0.08 2004-May-17
[    5.137920] NET: Registered protocol family 10
[    5.138289] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    5.140977] Segment Routing with IPv6
[    5.141000] NET: Registered protocol family 17
[    5.141065] Key type dns_resolver registered
[    5.141271] RAS: Correctable Errors collector initialized.
[    5.141300] microcode: sig=0x306c3, pf=0x10, revision=0x28
[    5.141351] microcode: Microcode Update Driver: v2.2.
[    5.141357] sched_clock: Marking stable (5141346717, 0)->(5118042103, 23304614)
[    5.141530] registered taskstats version 1
[    5.141537] Loading compiled-in X.509 certificates
[    5.143171] Loaded X.509 cert 'Build time autogenerated kernel key: 1cc14bc8298a06d551159822c55fa35abd77a621'
[    5.143184] Couldn't get size: 0x800000000000000e
[    5.143199] MODSIGN: Couldn't get UEFI db list
[    5.144761] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[    5.144767] Couldn't get size: 0x800000000000000e
[    5.144780] MODSIGN: Couldn't get UEFI dbx list
[    5.144796] zswap: loaded using pool lzo/zbud
[    5.147038] Key type big_key registered
[    5.147041] Key type trusted registered
[    5.148127] Key type encrypted registered
[    5.148129] AppArmor: AppArmor sha1 policy hashing enabled
[    5.158822] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
[    5.158843] ima: No TPM chip found, activating TPM-bypass! (rc=6)
[    5.158848] ima: Allocated hash algorithm: sha1
[    5.158858] evm: HMAC attrs: 0x1
[    5.159154]   Magic number: 13:558:640
[    5.159285] rtc_cmos 00:03: setting system clock to 2021-03-04 16:37:44 UTC (1614875864)
[    5.159342] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    5.159342] EDD information not available.
[    5.160869] Freeing unused kernel image memory: 2408K
[    5.196091] Write protecting the kernel read-only data: 20480k
[    5.196525] Freeing unused kernel image memory: 2008K
[    5.196762] Freeing unused kernel image memory: 1872K
[    5.201977] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    5.201978] x86/mm: Checking user space page tables
[    5.206961] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    5.277831] ahci 0000:00:1f.2: version 3.0
[    5.278062] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    5.278095] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x23 impl SATA mode
[    5.278098] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part apst 
[    5.278603] scsi host0: ahci
[    5.278703] scsi host1: ahci
[    5.278790] scsi host2: ahci
[    5.278874] scsi host3: ahci
[    5.278951] scsi host4: ahci
[    5.279024] scsi host5: ahci
[    5.279061] ata1: SATA max UDMA/133 abar m2048@0x82841000 port 0x82841100 irq 30
[    5.279063] ata2: SATA max UDMA/133 abar m2048@0x82841000 port 0x82841180 irq 30
[    5.279064] ata3: DUMMY
[    5.279065] ata4: DUMMY
[    5.279066] ata5: DUMMY
[    5.279068] ata6: SATA max UDMA/133 abar m2048@0x82841000 port 0x82841380 irq 30
[    5.282103] pps_core: LinuxPPS API ver. 1 registered
[    5.282104] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    5.283065] PTP clock support registered
[    5.300963] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    5.300964] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    5.301222] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    5.374127] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    5.442660] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 28:d2:44:6b:c0:73
[    5.442662] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    5.442702] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
[    5.443156] [drm] Memory usable by graphics device = 2048M
[    5.443158] checking generic (90000000 7f0000) vs hw (90000000 10000000)
[    5.443159] fb: switching to inteldrmfb from EFI VGA
[    5.443181] Console: switching to colour dummy device 80x25
[    5.443256] [drm] Replacing VGA console driver
[    5.443670] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    5.452077] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    5.468078] usb 3-6: new high-speed USB device number 2 using xhci_hcd
[    5.468088] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    5.500632] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.500633] [drm] Driver supports precise vblank timestamp query.
[    5.500662] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    5.526711] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[    5.526900] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.595009] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.596962] ata1.00: supports DRM functions and may not be fully accessible
[    5.597435] ata1.00: NCQ Send/Recv Log not supported
[    5.597438] ata1.00: ATA-9: SAMSUNG MZ7TE256HMHP-000L7, EXT0AL6Q, max UDMA/133
[    5.597439] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    5.598288] ata1.00: supports DRM functions and may not be fully accessible
[    5.598669] ata1.00: NCQ Send/Recv Log not supported
[    5.599224] ata1.00: configured for UDMA/133
[    5.599496] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG MZ7TE256 AL6Q PQ: 0 ANSI: 5
[    5.599730] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.599794] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    5.599805] sd 0:0:0:0: [sda] Write Protect is off
[    5.599807] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.599841] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.602393]  sda: sda1 sda2 sda3 sda4
[    5.604147] sd 0:0:0:0: [sda] supports TCG Opal
[    5.604148] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.664060] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    5.664062] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.664264] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    5.664265] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.664309] hub 1-1:1.0: USB hub found
[    5.664405] hub 2-1:1.0: USB hub found
[    5.664411] hub 1-1:1.0: 6 ports detected
[    5.664877] hub 2-1:1.0: 8 ports detected
[    5.665068] usb 3-6: New USB device found, idVendor=03f0, idProduct=3307
[    5.665070] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.665071] usb 3-6: Product: v125w
[    5.665072] usb 3-6: Manufacturer: HP
[    5.665073] usb 3-6: SerialNumber: AA66060027NT4X
[    5.667575] usb-storage 3-6:1.0: USB Mass Storage device detected
[    5.667676] scsi host6: usb-storage 3-6:1.0
[    5.667717] usbcore: registered new interface driver usb-storage
[    5.668589] usbcore: registered new interface driver uas
[    5.772158] acpi device:0b: registered as cooling_device5
[    5.772198] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    5.800113] usb 3-11: new full-speed USB device number 3 using xhci_hcd
[    5.801563] random: fast init done
[    5.915051] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.927510] ata2.00: ATA-8: KINGSTON SMS200S3120G, 603ABBF0, max UDMA/133
[    5.927512] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    5.932976] ata2.00: configured for UDMA/133
[    5.933163] scsi 1:0:0:0: Direct-Access     ATA      KINGSTON SMS200S BBF0 PQ: 0 ANSI: 5
[    5.933435] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.933458] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.933463] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.933494] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    5.933590] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    5.933615] sd 1:0:0:0: [sdb] Write Protect is off
[    5.933618] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    5.933648] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.934512]  sdb: sdb1 sdb2
[    5.934858] sd 1:0:0:0: [sdb] Attached SCSI disk
[    5.949311] usb 3-11: New USB device found, idVendor=8087, idProduct=0a2a
[    5.949313] usb 3-11: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.001469] fbcon: inteldrmfb (fb0) is primary device
[    6.016124] tsc: Refined TSC clocksource calibration: 2893.303 MHz
[    6.016133] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b48c6eeb1, max_idle_ns: 440795229827 ns
[    6.057110] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
[    6.076067] usb 3-12: new high-speed USB device number 4 using xhci_hcd
[    6.087468] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
[    6.087472] psmouse serio1: synaptics: Trying to set up SMBus access
[    6.090344] psmouse serio1: synaptics: SMbus companion is not ready yet
[    6.149776] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf003a3/0x943300/0x12e800/0x10000, board id: 3053, fw id: 2560
[    6.149782] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    6.187620] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    6.247485] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    6.250159] ata6.00: ATAPI: HL-DT-ST DVDRAM GU90N, LU20, max UDMA/133
[    6.252275] ata6.00: configured for UDMA/133
[    6.256151] scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRAM GU90N     LU20 PQ: 0 ANSI: 5
[    6.292672] usb 3-12: New USB device found, idVendor=04f2, idProduct=b39a
[    6.292673] usb 3-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.292675] usb 3-12: Product: Integrated Camera
[    6.292676] usb 3-12: Manufacturer: SunplusIT INC.
[    6.319659] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    6.319660] cdrom: Uniform CD-ROM driver Revision: 3.20
[    6.319813] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    6.319900] sr 5:0:0:0: Attached scsi generic sg2 type 5
[    6.814159] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    7.006516] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
[    7.040245] clocksource: Switched to clocksource tsc
[    7.073802] scsi 6:0:0:0: Direct-Access     hp       v125w            1100 PQ: 0 ANSI: 4
[    7.074092] sd 6:0:0:0: Attached scsi generic sg3 type 0
[    7.074268] sd 6:0:0:0: [sdc] 61030400 512-byte logical blocks: (31.2 GB/29.1 GiB)
[    7.074778] sd 6:0:0:0: [sdc] Write Protect is off
[    7.074779] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
[    7.075275] sd 6:0:0:0: [sdc] No Caching mode page found
[    7.075276] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    7.077947]  sdc: sdc1
[    7.079454] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    7.133669] Console: switching to colour frame buffer device 240x67
[    7.153291] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    8.407655] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[   10.060555] random: crng init done
[   10.060556] random: 7 urandom warning(s) missed due to ratelimiting
[   13.682559] ip_tables: (C) 2000-2006 Netfilter Core Team
[   13.687937] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   13.704173] systemd[1]: Detected architecture x86-64.
[   13.705881] systemd[1]: Set hostname to <mint>.
[   13.825087] systemd[1]: Reached target Swap.
[   13.825252] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   13.825373] systemd[1]: Created slice User and Session Slice.
[   13.825382] systemd[1]: Reached target User and Group Name Lookups.
[   13.825463] systemd[1]: Created slice System Slice.
[   13.825511] systemd[1]: Listening on LVM2 poll daemon socket.
[   13.827035] systemd[1]: Listening on Process Core Dump Socket.
[   13.917201] systemd-journald[925]: Received request to flush runtime journal from PID 1
[   13.993732] lp: driver loaded but no devices found
[   14.000994] ppdev: user-space parallel port driver
[   14.401254] EDAC ie31200: No ECC support
[   14.550800] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[   15.124388] media: Linux media interface: v0.10
[   15.171653] Non-volatile memory driver v1.3
[   15.197547] Bluetooth: Core ver 2.22
[   15.197564] NET: Registered protocol family 31
[   15.197565] Bluetooth: HCI device and connection manager initialized
[   15.197567] Bluetooth: HCI socket layer initialized
[   15.197568] Bluetooth: L2CAP socket layer initialized
[   15.197572] Bluetooth: SCO socket layer initialized
[   15.246293] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[   15.246294] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   15.246295] RAPL PMU: hw unit of domain package 2^-14 Joules
[   15.246296] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   15.246296] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   15.274585] Linux video capture interface: v2.00
[   15.303648] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[   15.303649] thinkpad_acpi: http://ibm-acpi.sf.net/
[   15.303649] thinkpad_acpi: ThinkPad BIOS GLETA1WW (2.55), EC GLHT30WW-3.23
[   15.303947] thinkpad_acpi: radio switch found; radios are enabled
[   15.304035] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[   15.304076] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[   15.304078] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[   15.305480] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[   15.306022] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
[   15.308200] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[   15.308247] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[   15.309428] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
[   15.457311] usbcore: registered new interface driver btusb
[   15.473267] Bluetooth: hci0: read Intel version: 370810011003110e00
[   15.513551] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b39a)
[   15.523745] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[   15.524063] uvcvideo 3-12:1.0: Entity type for entity Extension 4 was not initialized!
[   15.524065] uvcvideo 3-12:1.0: Entity type for entity Extension 3 was not initialized!
[   15.524067] uvcvideo 3-12:1.0: Entity type for entity Processing 2 was not initialized!
[   15.524069] uvcvideo 3-12:1.0: Entity type for entity Camera 1 was not initialized!
[   15.524202] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.0/input/input9
[   15.524404] usbcore: registered new interface driver uvcvideo
[   15.524405] USB Video Class driver (1.1.1)
[   15.611226] AVX2 version of gcm_enc/dec engaged.
[   15.611228] AES CTR mode by8 optimization enabled
[   15.775094] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.775095] Bluetooth: BNEP filters: protocol multicast
[   15.775098] Bluetooth: BNEP socket layer initialized
[   15.847644] Bluetooth: hci0: Intel firmware patch completed and activated
[   15.995368] intel_rapl: Found RAPL domain package
[   15.995370] intel_rapl: Found RAPL domain core
[   15.995370] intel_rapl: Found RAPL domain uncore
[   15.995371] intel_rapl: Found RAPL domain dram
[   16.227799] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   16.412254] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   16.576067] mei_me 0000:00:16.0: wait hw ready failed
[   16.576118] mei_me 0000:00:16.0: hw_start failed ret = -62
[   16.576182] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[   18.592071] mei_me 0000:00:16.0: wait hw ready failed
[   18.592077] mei_me 0000:00:16.0: hw_start failed ret = -62
[   18.592095] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[   20.478399] Bluetooth: RFCOMM TTY layer initialized
[   20.478406] Bluetooth: RFCOMM socket layer initialized
[   20.478410] Bluetooth: RFCOMM ver 1.11
[   20.612058] mei_me 0000:00:16.0: wait hw ready failed
[   20.612064] mei_me 0000:00:16.0: hw_start failed ret = -62
[   20.612075] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[   20.612076] mei_me 0000:00:16.0: reset failed ret = -19
[   20.612077] mei_me 0000:00:16.0: link layer initialization failed.
[   20.612079] mei_me 0000:00:16.0: init hw failure.
[   20.612126] mei_me 0000:00:16.0: initialization failed.
[   20.612334] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   20.639827] gpio_ich: GPIO from 436 to 511 on gpio_ich
[   20.678402] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   20.678406] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   20.678408] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
[   20.678409] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   20.678410] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   20.678412] snd_hda_codec_realtek hdaudioC1D0:      Dock Mic=0x19
[   20.678413] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x1a
[   20.678415] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[   20.712137] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   20.712392] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   20.723467] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[   20.723570] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[   20.723655] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[   20.723730] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[   20.770411] Intel(R) Wireless WiFi driver for Linux
[   20.770412] Copyright(c) 2003- 2015 Intel Corporation
[   20.788114] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   20.823356] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[   20.823477] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[   20.823571] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[   20.823658] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[   20.823705] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[   20.876823] iwlwifi 0000:03:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
[   21.037530] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[   21.057916] iwlwifi 0000:03:00.0: base HW address: 60:57:18:f0:6a:04
[   21.130393] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   21.130632] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   21.130647] thermal thermal_zone3: failed to read out thermal zone (-61)
[   21.152629] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[   21.187776] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   21.288290] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   21.349884] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   81.034654] pcieport 0000:00:1c.1: AER: Corrected error received: id=00e1
[   81.034666] pcieport 0000:00:1c.1: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e1(Receiver ID)
[   81.034676] pcieport 0000:00:1c.1:   device [8086:8c12] error status/mask=00000001/00002000
[   81.034683] pcieport 0000:00:1c.1:    [ 0] Receiver Error         (First)
