[    0.000000] Linux version 4.6.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.0 20160609 (Debian 5.4.0-6) ) #1 SMP Debian 4.6.4-1 (2016-07-18)
[    0.000000] Command line: BOOT_IMAGE=(ahci0,gpt4)/vmlinuz root=/dev/sda4 ro quiet
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bfe9cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfe9d000-0x00000000bfffffff] type 16
[    0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000c29fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023c5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 4294CTO/4294CTO, BIOS CBET4000 4.4-1254-g3ad6356 08/18/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x23c600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0C0000000 mask FE0000000 uncachable
[    0.000000]   1 base 0E0000000 mask FF0000000 write-combining
[    0.000000]   2 base 0F0000000 mask FF0000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xbfe9d max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x01d36000, 0x01d36fff] PGTABLE
[    0.000000] BRK [0x01d37000, 0x01d37fff] PGTABLE
[    0.000000] BRK [0x01d38000, 0x01d38fff] PGTABLE
[    0.000000] BRK [0x01d39000, 0x01d39fff] PGTABLE
[    0.000000] BRK [0x01d3a000, 0x01d3afff] PGTABLE
[    0.000000] BRK [0x01d3b000, 0x01d3bfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35bdb000-0x36de4fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000BFEB10E0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000BFEB48B0 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000BFEB1280 003627 (v02 COREv4 COREBOOT 20110725 INTL 20160318)
[    0.000000] ACPI: FACS 0x00000000BFEB1240 000040
[    0.000000] ACPI: FACS 0x00000000BFEB1240 000040
[    0.000000] ACPI: SSDT 0x00000000BFEB49B0 001569 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: MCFG 0x00000000BFEB5F20 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: TCPA 0x00000000BFEB5F60 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x00000000BFEB5FA0 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DMAR 0x00000000BFEB6010 0000A8 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000BFEB60C0 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023c5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x23c5f6000-0x23c5fafff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023c5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000bfe9cfff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000023c5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023c5fffff]
[    0.000000] On node 0 totalpages: 2080828
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 159 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12203 pages used for memmap
[    0.000000]   DMA32 zone: 780957 pages, LIFO batch:31
[    0.000000]   Normal zone: 20248 pages used for memmap
[    0.000000]   Normal zone: 1295872 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xc0a00000-0xc29fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfe9d000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xc29fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc2a00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[    0.000000] e820: [mem 0xc2a00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 32 pages/cpu @ffff88023c200000 s93720 r8192 d29160 u524288
[    0.000000] pcpu-alloc: s93720 r8192 d29160 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2048154
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=(ahci0,gpt4)/vmlinuz root=/dev/sda4 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8092724K/8323312K available (5932K kernel code, 1090K rwdata, 2700K rodata, 1336K init, 824K bss, 230588K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2494.225 MHz processor
[    0.000032] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.45 BogoMIPS (lpj=9976900)
[    0.000035] pid_max: default: 32768 minimum: 301
[    0.000045] ACPI: Core revision 20160108
[    0.002987] ACPI: 2 ACPI AML tables successfully acquired and loaded

[    0.003023] Security Framework initialized
[    0.003025] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.003033] AppArmor: AppArmor disabled by boot time parameter
[    0.003537] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.005142] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.005837] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.005848] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.006183] Disabling memory control group subsystem
[    0.006210] CPU: Physical Processor ID: 0
[    0.006211] CPU: Processor Core ID: 0
[    0.006216] mce: CPU supports 7 MCE banks
[    0.006228] CPU0: Thermal monitoring enabled (TM1)
[    0.006233] process: using mwait in idle threads
[    0.006237] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.006238] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.006623] Freeing SMP alternatives memory: 24K (ffffffff81c60000 - ffffffff81c66000)
[    0.008610] ftrace: allocating 24381 entries in 96 pages
[    0.019432] smpboot: Max logical packages: 2
[    0.019435] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.019446] DMAR: Host address width 36
[    0.019448] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.019453] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.019455] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.019458] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.019460] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.019461] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.019463] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.019793] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.019796] x2apic enabled
[    0.019802] Switched APIC routing to cluster x2apic.
[    0.020260] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.059950] TSC deadline timer enabled
[    0.059954] smpboot: CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.059976] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.059998] ... version:                3
[    0.059999] ... bit width:              48
[    0.060000] ... generic registers:      4
[    0.060001] ... value mask:             0000ffffffffffff
[    0.060001] ... max period:             0000ffffffffffff
[    0.060002] ... fixed-purpose events:   3
[    0.060003] ... event mask:             000000070000000f
[    0.060537] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.060634] x86: Booting SMP configuration:
[    0.060636] .... node  #0, CPUs:      #1 #2 #3
[    0.302110] x86: Booted up 1 node, 4 CPUs
[    0.302114] smpboot: Total of 4 processors activated (19957.17 BogoMIPS)
[    0.305454] devtmpfs: initialized
[    0.305521] x86/mm: Memory block size: 128MB
[    0.308232] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.308296] pinctrl core: initialized pinctrl subsystem
[    0.308441] NET: Registered protocol family 16
[    0.317137] cpuidle: using governor ladder
[    0.326089] cpuidle: using governor menu
[    0.326226] ACPI: bus type PCI registered
[    0.326228] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.326311] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.326314] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.326323] PCI: Using configuration type 1 for base access
[    0.326345] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.338306] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.338562] ACPI: Added _OSI(Module Device)
[    0.338564] ACPI: Added _OSI(Processor Device)
[    0.338565] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.338566] ACPI: Added _OSI(Processor Aggregator Device)
[    0.338783] ACPI: Executed 1 blocks of module-level executable AML code
[    0.340670] ACPI : EC: EC started
[    0.340715] ACPI: Interpreter enabled
[    0.340731] ACPI: (supports S0 S3 S4 S5)
[    0.340732] ACPI: Using IOAPIC for interrupt routing
[    0.340754] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.345058] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.345063] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.345111] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.345119] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.345318] PCI host bridge to bus 0000:00
[    0.345321] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.345323] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.345325] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.345326] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.345328] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.345329] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.345331] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.345332] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.345334] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.345335] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.345337] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.345338] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.345340] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.345341] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.345343] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.345344] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.345346] pci_bus 0000:00: root bus resource [mem 0xc2a00000-0xf7ffffff window]
[    0.345347] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.345349] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.345356] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.345445] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[    0.345454] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit]
[    0.345459] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.345463] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.345540] pci 0000:00:04.0: [8086:0103] type 00 class 0x118000
[    0.345548] pci 0000:00:04.0: reg 0x10: [mem 0xf1620000-0xf1627fff 64bit]
[    0.345652] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.345667] pci 0000:00:19.0: reg 0x10: [mem 0xf1600000-0xf161ffff]
[    0.345676] pci 0000:00:19.0: reg 0x14: [mem 0xf162c000-0xf162cfff]
[    0.345685] pci 0000:00:19.0: reg 0x18: [io  0x3040-0x305f]
[    0.345744] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.345814] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.345832] pci 0000:00:1a.0: reg 0x10: [mem 0xf162e000-0xf162e3ff]
[    0.345916] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.345953] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.345996] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.346013] pci 0000:00:1b.0: reg 0x10: [mem 0xf1628000-0xf162bfff 64bit]
[    0.346085] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.346125] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.346171] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.346285] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.346374] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.346499] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.346587] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.346710] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.346798] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.346922] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.347010] pci 0000:00:1c.5: [8086:1c1c] type 01 class 0x060400
[    0.347123] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.347208] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.347226] pci 0000:00:1d.0: reg 0x10: [mem 0xf162f000-0xf162f3ff]
[    0.347310] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.347345] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.347386] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[    0.347551] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.347568] pci 0000:00:1f.2: reg 0x10: [io  0x3080-0x3087]
[    0.347577] pci 0000:00:1f.2: reg 0x14: [io  0x3090-0x3093]
[    0.347586] pci 0000:00:1f.2: reg 0x18: [io  0x3088-0x308f]
[    0.347594] pci 0000:00:1f.2: reg 0x1c: [io  0x3094-0x3097]
[    0.347603] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.347612] pci 0000:00:1f.2: reg 0x24: [mem 0xf162d000-0xf162d7ff]
[    0.347657] pci 0000:00:1f.2: PME# supported from D3hot
[    0.347726] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.347742] pci 0000:00:1f.3: reg 0x10: [mem 0xf1630000-0xf16300ff 64bit]
[    0.347763] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.347905] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.348125] pci 0000:02:00.0: [8086:088e] type 00 class 0x028000
[    0.348293] pci 0000:02:00.0: reg 0x10: [mem 0xf1400000-0xf1401fff 64bit]
[    0.349049] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.357326] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.357335] pci 0000:00:1c.1:   bridge window [mem 0xf1400000-0xf14fffff]
[    0.357425] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.357431] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.357435] pci 0000:00:1c.3:   bridge window [mem 0xf0800000-0xf0ffffff]
[    0.357444] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[    0.357543] pci 0000:04:00.0: [1180:e822] type 00 class 0x080501
[    0.357577] pci 0000:04:00.0: MMC controller base frequency changed to 50Mhz.
[    0.357616] pci 0000:04:00.0: reg 0x10: [mem 0xf1500000-0xf15000ff]
[    0.357922] pci 0000:04:00.0: supports D1 D2
[    0.357924] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.365215] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.365231] pci 0000:00:1c.4:   bridge window [mem 0xf1500000-0xf15fffff]
[    0.365331] pci 0000:00:1c.5: PCI bridge to [bus 05]
[    0.365477] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.365525] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.365570] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.365615] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.365660] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.365705] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.365749] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.365794] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.366476] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.366526] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[    0.366614] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.366616] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.366619] vgaarb: loaded
[    0.366620] vgaarb: bridge control possible 0000:00:02.0
[    0.366709] PCI: Using ACPI for IRQ routing
[    0.368168] PCI: pci_cache_line_size set to 64 bytes
[    0.368284] e820: reserve RAM buffer [mem 0xbfe9d000-0xbfffffff]
[    0.368286] e820: reserve RAM buffer [mem 0x23c600000-0x23fffffff]
[    0.368461] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.368466] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.370491] clocksource: Switched to clocksource hpet
[    0.376313] VFS: Disk quotas dquot_6.6.0
[    0.376341] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.376483] pnp: PnP ACPI init
[    0.376580] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.376582] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.376584] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.376586] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.376587] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.376589] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.376591] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.376593] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.376594] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
[    0.376596] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
[    0.376600] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.377129] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.377132] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.377172] system 00:02: [io  0x0500-0x057f] could not be reserved
[    0.377174] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.377176] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.377200] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.377233] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.377261] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.377357] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[    0.377374] pnp: PnP ACPI: found 7 devices
[    0.383949] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.384015] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.384033] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.384039] pci 0000:00:1c.1:   bridge window [mem 0xf1400000-0xf14fffff]
[    0.384051] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.384054] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.384061] pci 0000:00:1c.3:   bridge window [mem 0xf0800000-0xf0ffffff]
[    0.384066] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[    0.384074] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.384081] pci 0000:00:1c.4:   bridge window [mem 0xf1500000-0xf15fffff]
[    0.384093] pci 0000:00:1c.5: PCI bridge to [bus 05]
[    0.384111] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.384113] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.384115] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.384116] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.384118] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.384119] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.384121] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.384122] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.384124] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.384125] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.384127] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.384128] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.384129] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.384131] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.384132] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.384134] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.384135] pci_bus 0000:00: resource 20 [mem 0xc2a00000-0xf7ffffff window]
[    0.384137] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[    0.384139] pci_bus 0000:02: resource 1 [mem 0xf1400000-0xf14fffff]
[    0.384140] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.384142] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf0ffffff]
[    0.384143] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf07fffff 64bit pref]
[    0.384145] pci_bus 0000:04: resource 1 [mem 0xf1500000-0xf15fffff]
[    0.384203] NET: Registered protocol family 2
[    0.384378] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.384513] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.384641] TCP: Hash tables configured (established 65536 bind 65536)
[    0.384670] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.384698] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.384787] NET: Registered protocol family 1
[    0.384805] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.385237] PCI: CLS 64 bytes, default 64
[    0.385290] Unpacking initramfs...
[    0.710500] Freeing initrd memory: 18472K (ffff880035bdb000 - ffff880036de5000)
[    0.710561] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.710563] software IO TLB [mem 0xbbe9d000-0xbfe9d000] (64MB) mapped at [ffff8800bbe9d000-ffff8800bfe9cfff]
[    0.710614] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    0.710615] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    0.710616] RAPL PMU: hw unit of domain package 2^-16 Joules
[    0.710617] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    0.710998] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.711032] audit: initializing netlink subsys (disabled)
[    0.711047] audit: type=2000 audit(1471887839.712:1): initialized
[    0.711480] Initialise system trusted keyring
[    0.711578] workingset: timestamp_bits=37 max_order=21 bucket_order=0
[    0.711598] zbud: loaded
[    0.758869] Key type asymmetric registered
[    0.758872] Asymmetric key parser 'x509' registered
[    0.758893] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.758927] io scheduler noop registered
[    0.758930] io scheduler deadline registered
[    0.758942] io scheduler cfq registered (default)
[    0.759839] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.759845] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.759870] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.759872] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.759877] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.759901] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.759906] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.759932] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.759933] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    0.759938] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.759963] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[    0.759967] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[    0.759974] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.759989] pciehp 0000:00:1c.3:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.760018] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
[    0.760023] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.760045] intel_idle: MWAIT substates: 0x21120
[    0.760046] intel_idle: v0.4.1 model 0x2A
[    0.760196] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.760220] GHES: HEST is not enabled!
[    0.760285] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.760680] Linux agpgart interface v0.103
[    0.760731] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.760732] AMD IOMMUv2 functionality not available on this system
[    0.761076] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.765552] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.765557] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.765691] mousedev: PS/2 mouse device common for all mice
[    0.765734] rtc_cmos 00:03: RTC can wake from S4
[    0.765861] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.765890] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.765901] Intel P-state driver initializing.
[    0.770128] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.818707] ledtrig-cpu: registered to indicate activity on CPUs
[    0.819478] NET: Registered protocol family 10
[    0.819943] mip6: Mobile IPv6
[    0.819953] NET: Registered protocol family 17
[    0.819964] mpls_gso: MPLS GSO support
[    0.820520] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[    0.820542] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
[    0.820555] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
[    0.820575] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
[    0.820713] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.821138] registered taskstats version 1
[    0.821194] Loading compiled-in X.509 certificates
[    0.824336] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    0.825121] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    0.825184] zswap: loaded using pool lzo/zbud
[    0.826116] rtc_cmos 00:03: setting system clock to 2016-08-22 17:44:00 UTC (1471887840)
[    0.826284] PM: Hibernation image not present or could not be loaded.
[    0.829509] Freeing unused kernel memory: 1336K (ffffffff81b12000 - ffffffff81c60000)
[    0.829514] Write protecting the kernel read-only data: 10240k
[    0.829992] Freeing unused kernel memory: 196K (ffff8800015cf000 - ffff880001600000)
[    0.837621] Freeing unused kernel memory: 1396K (ffff8800018a3000 - ffff880001a00000)
[    0.854390] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.959989] random: systemd-udevd urandom read with 1 bits of entropy available
[    1.017481] fjes: module verification failed: signature and/or required key missing - tainting kernel
[    1.017777] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.033414] thermal LNXTHERM:00: registered as thermal_zone0
[    1.033419] ACPI: Thermal Zone [THM0] (55 C)
[    1.034342] thermal LNXTHERM:01: registered as thermal_zone1
[    1.034345] ACPI: Thermal Zone [THM1] (27 C)
[    1.035538] pps_core: LinuxPPS API ver. 1 registered
[    1.035542] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.035794] PTP clock support registered
[    1.037166] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.037169] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.037265] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.037642] ACPI: bus type USB registered
[    1.037678] usbcore: registered new interface driver usbfs
[    1.037694] usbcore: registered new interface driver hub
[    1.037717] usbcore: registered new device driver usb
[    1.038230] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.038440] ehci-pci: EHCI PCI platform driver
[    1.045226] sdhci: Secure Digital Host Controller Interface driver
[    1.045229] sdhci: Copyright(c) Pierre Ossman
[    1.045561] sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e822] (rev 7)
[    1.046692] SCSI subsystem initialized
[    1.047290] mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA
[    1.048640] libata version 3.00 loaded.
[    1.064191] AVX version of gcm_enc/dec engaged.
[    1.064195] AES CTR mode by8 optimization enabled
[    1.286387] e1000e 0000:00:19.0 eth0: registered PHC clock
[    1.286391] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:c9:0a:e5
[    1.286392] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.286443] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    1.286637] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.286645] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.286660] ehci-pci 0000:00:1a.0: debug port 2
[    1.290579] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.290605] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf162e000
[    1.292103] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    1.306561] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.306655] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.306657] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.306659] usb usb1: Product: EHCI Host Controller
[    1.306660] usb usb1: Manufacturer: Linux 4.6.0-1-amd64 ehci_hcd
[    1.306661] usb usb1: SerialNumber: 0000:00:1a.0
[    1.308769] hub 1-0:1.0: USB hub found
[    1.308792] hub 1-0:1.0: 3 ports detected
[    1.309081] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.309087] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.309098] ehci-pci 0000:00:1d.0: debug port 2
[    1.312998] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.313014] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf162f000
[    1.326790] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.326847] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.326849] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.326850] usb usb2: Product: EHCI Host Controller
[    1.326851] usb usb2: Manufacturer: Linux 4.6.0-1-amd64 ehci_hcd
[    1.326852] usb usb2: SerialNumber: 0000:00:1d.0
[    1.327080] hub 2-0:1.0: USB hub found
[    1.327086] hub 2-0:1.0: 3 ports detected
[    1.327221] ahci 0000:00:1f.2: version 3.0
[    1.327396] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.337574] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[    1.337586] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    1.338224] scsi host0: ahci
[    1.338325] scsi host1: ahci
[    1.338407] scsi host2: ahci
[    1.338490] scsi host3: ahci
[    1.338590] scsi host4: ahci
[    1.338672] scsi host5: ahci
[    1.338716] ata1: SATA max UDMA/133 abar m2048@0xf162d000 port 0xf162d100 irq 32
[    1.338719] ata2: SATA max UDMA/133 abar m2048@0xf162d000 port 0xf162d180 irq 32
[    1.338722] ata3: SATA max UDMA/133 abar m2048@0xf162d000 port 0xf162d200 irq 32
[    1.338722] ata4: DUMMY
[    1.338723] ata5: DUMMY
[    1.338724] ata6: DUMMY
[    1.618657] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.638617] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.650499] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.652936] ata1.00: supports DRM functions and may not be fully accessible
[    1.653271] ata1.00: disabling queued TRIM support
[    1.653284] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0DB6Q, max UDMA/133
[    1.653288] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.654048] ata1.00: supports DRM functions and may not be fully accessible
[    1.654411] ata1.00: disabling queued TRIM support
[    1.654420] ata1.00: configured for UDMA/133
[    1.654925] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  DB6Q PQ: 0 ANSI: 5
[    1.710858] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[    1.710865] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45085418, max_idle_ns: 440795285711 ns
[    1.751427] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.751437] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.752105] hub 1-1:1.0: USB hub found
[    1.752240] hub 1-1:1.0: 6 ports detected
[    1.771449] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.771459] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.772074] hub 2-1:1.0: USB hub found
[    1.772212] hub 2-1:1.0: 8 ports detected
[    1.994356] ata2: SATA link down (SStatus 0 SControl 300)
[    2.026691] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    2.042662] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[    2.045665] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[    2.120572] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
[    2.120582] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.120586] usb 1-1.3: Product: Biometric Coprocessor
[    2.120590] usb 1-1.3: Manufacturer: UPEK
[    2.136131] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00/0x0, board id: 1611, fw id: 774180
[    2.136158] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.139585] usb 2-1.3: New USB device found, idVendor=8087, idProduct=07da
[    2.139594] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.190665] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[    2.194387] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    2.210676] usb 2-1.4: new high-speed USB device number 4 using ehci-pci
[    2.289702] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217
[    2.289713] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.289717] usb 1-1.6: Product: Integrated Camera
[    2.289721] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[    2.306120] ata3: SATA link down (SStatus 0 SControl 300)
[    2.311347] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=190d
[    2.311361] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.311370] usb 2-1.4: Product: F5521gw
[    2.311376] usb 2-1.4: Manufacturer: Ericsson
[    2.311382] usb 2-1.4: SerialNumber: 1B6D288CB004B6B0
[    2.329061] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    2.329244] sd 0:0:0:0: [sda] Write Protect is off
[    2.329253] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.329312] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.331684]  sda: sda1 sda2 sda3 sda4 sda5
[    2.332584] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.418615] usb 2-1.5: new full-speed USB device number 5 using ehci-pci
[    2.470604] raid6: sse2x1   gen()  4646 MB/s
[    2.513220] usb 2-1.5: New USB device found, idVendor=056a, idProduct=00e6
[    2.513224] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.513225] usb 2-1.5: Product: ISD-V4
[    2.513227] usb 2-1.5: Manufacturer: Tablet
[    2.516764] hidraw: raw HID events driver (C) Jiri Kosina
[    2.527090] usbcore: registered new interface driver usbhid
[    2.527094] usbhid: USB HID core driver
[    2.528746] input: Wacom ISDv4 E6 Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:056A:00E6.0001/input/input4
[    2.528838] wacom 0003:056A:00E6.0001: hidraw0: USB HID v1.11 Device [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input0
[    2.529163] input: Wacom ISDv4 E6 Finger as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:056A:00E6.0002/input/input8
[    2.529244] wacom 0003:056A:00E6.0002: hidraw1: USB HID v1.11 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input1
[    2.538603] raid6: sse2x1   xor()  4644 MB/s
[    2.606596] raid6: sse2x2   gen() 10260 MB/s
[    2.674598] raid6: sse2x2   xor()  7611 MB/s
[    2.742601] raid6: sse2x4   gen() 10095 MB/s
[    2.810602] raid6: sse2x4   xor()  5295 MB/s
[    2.810604] raid6: using algorithm sse2x2 gen() 10260 MB/s
[    2.810605] raid6: .... xor() 7611 MB/s, rmw enabled
[    2.810606] raid6: using ssse3x2 recovery algorithm
[    2.810622] clocksource: Switched to clocksource tsc
[    2.810937] xor: automatically using best checksumming function:
[    2.850604]    avx       : 21009.000 MB/sec
[    2.854122] Btrfs loaded
[    3.099515] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    3.406068] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
[    4.663464] random: nonblocking pool is initialized
[    5.040681] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    5.139240] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    5.139354] systemd[1]: Detected architecture x86-64.
[    5.139516] systemd[1]: Set hostname to <cornaLaptop>.
[    5.230257] systemd[1]: Reached target User and Group Name Lookups.
[    5.230355] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.230394] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.230527] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.230606] systemd[1]: Listening on Journal Audit Socket.
[    5.230639] systemd[1]: Listening on RPCbind Server Activation Socket.
[    5.230653] systemd[1]: Reached target Swap.
[    5.230662] systemd[1]: Reached target Encrypted Volumes.
[    5.230684] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.230742] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.230842] systemd[1]: Created slice User and Session Slice.
[    5.230876] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    5.230913] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.230945] systemd[1]: Listening on LVM2 metadata daemon socket.
[    5.230969] systemd[1]: Listening on udev Kernel Socket.
[    5.230994] systemd[1]: Listening on Syslog Socket.
[    5.231069] systemd[1]: Created slice System Slice.
[    5.231092] systemd[1]: Reached target Slices.
[    5.231171] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    5.231242] systemd[1]: Created slice system-tor.slice.
[    5.231272] systemd[1]: Listening on LVM2 poll daemon socket.
[    5.231311] systemd[1]: Listening on Journal Socket.
[    5.247113] systemd[1]: Mounting RPC Pipe File System...
[    5.248799] systemd[1]: Mounting Debug File System...
[    5.250438] systemd[1]: Starting Load Kernel Modules...
[    5.252143] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    5.253717] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[    5.255026] systemd[1]: Mounting Temporary Directory...
[    5.256251] systemd[1]: Mounting POSIX Message Queue File System...
[    5.257616] systemd[1]: Starting Journal Service...
[    5.262717] systemd[1]: Mounting Huge Pages File System...
[    5.263633] systemd[1]: Starting Remount Root and Kernel File Systems...
[    5.264593] lp: driver loaded but no devices found
[    5.264671] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    5.264775] systemd[1]: Listening on udev Control Socket.
[    5.264979] systemd[1]: Created slice system-getty.slice.
[    5.265787] systemd[1]: Starting Set the console keyboard layout...
[    5.266527] systemd[1]: Starting LSB: Use compressed RAM as in-memory swap...
[    5.266994] ppdev: user-space parallel port driver
[    5.268827] systemd[1]: Mounted Huge Pages File System.
[    5.268903] systemd[1]: Mounted Debug File System.
[    5.268935] systemd[1]: Mounted POSIX Message Queue File System.
[    5.268970] systemd[1]: Mounted Temporary Directory.
[    5.269383] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    5.270896] systemd[1]: Starting Create Static Device Nodes in /dev...
[    5.277257] systemd[1]: Started Load Kernel Modules.
[    5.278178] systemd[1]: Starting Apply Kernel Variables...
[    5.282816] RPC: Registered named UNIX socket transport module.
[    5.282820] RPC: Registered udp transport module.
[    5.282822] RPC: Registered tcp transport module.
[    5.282824] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.284334] systemd[1]: Mounted RPC Pipe File System.
[    5.285901] systemd[1]: Started LVM2 metadata daemon.
[    5.287622] EXT4-fs (sda4): re-mounted. Opts: discard,errors=remount-ro
[    5.289342] systemd[1]: Started Remount Root and Kernel File Systems.
[    5.289603] systemd[1]: Started Apply Kernel Variables.
[    5.293148] systemd[1]: Starting udev Coldplug all Devices...
[    5.293789] systemd[1]: Starting Load/Save Random Seed...
[    5.302946] systemd[1]: Started Create Static Device Nodes in /dev.
[    5.303753] systemd[1]: Starting udev Kernel Device Manager...
[    5.304214] systemd[1]: Started Load/Save Random Seed.
[    5.306969] systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[    5.308378] systemd[1]: Started Journal Service.
[    5.321036] systemd-journald[1027]: Received request to flush runtime journal from PID 1
[    5.325531] zram: Added device: zram0
[    5.325722] zram: Added device: zram1
[    5.325900] zram: Added device: zram2
[    5.326074] zram: Added device: zram3
[    5.332749] zram0: detected capacity change from 0 to 1557917696
[    5.341204] Adding 1521400k swap on /dev/zram0.  Priority:10 extents:1 across:1521400k SSFS
[    5.343200] zram1: detected capacity change from 0 to 1557917696
[    5.348566] Adding 1521400k swap on /dev/zram1.  Priority:10 extents:1 across:1521400k SSFS
[    5.350599] zram2: detected capacity change from 0 to 1557917696
[    5.354673] Adding 1521400k swap on /dev/zram2.  Priority:10 extents:1 across:1521400k SSFS
[    5.355892] zram3: detected capacity change from 0 to 1557917696
[    5.359793] Adding 1521400k swap on /dev/zram3.  Priority:10 extents:1 across:1521400k SSFS
[    5.437612] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.442318] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input10
[    5.442324] ACPI: Sleep Button [SLPB]
[    5.442383] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input11
[    5.442664] ACPI: Lid Switch [LID]
[    5.442747] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input12
[    5.442751] ACPI: Power Button [PWRF]
[    5.444828] [drm] Initialized drm 1.1.0 20060810
[    5.450761] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[    5.457508] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160108/utaddress-255)
[    5.457515] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.457519] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160108/utaddress-255)
[    5.457523] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.457524] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160108/utaddress-255)
[    5.457528] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.457530] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160108/utaddress-255)
[    5.457533] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.457534] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    5.469482] Intel(R) Wireless WiFi driver for Linux
[    5.469486] Copyright(c) 2003- 2015 Intel Corporation
[    5.471776] [drm] Memory usable by graphics device = 2048M
[    5.471780] [drm] Replacing VGA console driver
[    5.472339] Console: switching to colour dummy device 80x25
[    5.475324] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-6000g2b-6.ucode
[    5.475529] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    5.486899] Non-volatile memory driver v1.3
[    5.489319] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    5.489323] thinkpad_acpi: http://ibm-acpi.sf.net/
[    5.489324] thinkpad_acpi: ThinkPad BIOS CBET4000 4.4-1254-g3ad6356, EC 8DHT34WW-3.20
[    5.489325] thinkpad_acpi: Lenovo ThinkPad X220 Tablet, model 4294CTO
[    5.489960] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    5.489963] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    5.489965] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[    5.489968] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
[    5.490027] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[    5.490719] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    5.490722] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    5.491415] ACPI: AC Adapter [AC] (off-line)
[    5.510350] ACPI: Battery Slot [BAT0] (battery present)
[    5.510491] ACPI: Battery Slot [BAT1] (battery absent)
[    5.512008] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    5.512166] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    5.512899] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    5.513666] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input13
[    5.517485] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.530783] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.530787] [drm] Driver supports precise vblank timestamp query.
[    5.531054] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    5.531750] input: PC Speaker as /devices/platform/pcspkr/input/input14
[    5.580782] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.581928] acpi device:03: registered as cooling_device4
[    5.582015] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15
[    5.582387] [drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 0
[    5.582950] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    5.614332] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
[    5.614819] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[    5.614823] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.614825] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[    5.614827] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[    5.614829] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[    5.614832] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x23
[    5.614834] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x1b
[    5.614836] snd_hda_codec_conexant hdaudioC0D0:      Dock Mic=0x1a
[    5.616136] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[    5.623540] intel_rapl: Found RAPL domain package
[    5.623544] intel_rapl: Found RAPL domain core
[    5.623546] intel_rapl: Found RAPL domain uncore
[    5.623635] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    5.623973] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    5.624045] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[    5.624117] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[    5.624187] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[    5.624258] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[    5.624325] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[    5.624391] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[    5.695158] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    5.709604] iTCO_vendor_support: vendor-support=0
[    5.710419] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    5.710464] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0560)
[    5.711795] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.740099] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    5.774738] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[    6.096161] fbcon: inteldrmfb (fb0) is primary device
[    7.014553] media: Linux media interface: v0.10
[    7.017942] Linux video capture interface: v2.00
[    7.063866] Bluetooth: Core ver 2.21
[    7.063881] NET: Registered protocol family 31
[    7.063882] Bluetooth: HCI device and connection manager initialized
[    7.063886] Bluetooth: HCI socket layer initialized
[    7.063889] Bluetooth: L2CAP socket layer initialized
[    7.063898] Bluetooth: SCO socket layer initialized
[    7.071851] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[    7.071918] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[    7.071939] usbcore: registered new interface driver cdc_wdm
[    7.083023] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
[    7.084440] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[    7.084444] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[    7.084446] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[    7.084557] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input24
[    7.084639] usbcore: registered new interface driver uvcvideo
[    7.084640] USB Video Class driver (1.1.1)
[    7.095739] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[    7.096088] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[    7.096124] usbcore: registered new interface driver cdc_ncm
[    7.096941] usbcore: registered new interface driver cdc_mbim
[    7.099976] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[    7.127478] usbcore: registered new interface driver btusb
[    7.707612] Console: switching to colour frame buffer device 170x48
[    7.710043] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    7.710172] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[    7.710664] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[    7.713007] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[    7.713336] usbcore: registered new interface driver cdc_acm
[    7.713337] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   10.496482] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: discard
[   10.595505] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.595508] Bluetooth: BNEP filters: protocol multicast
[   10.595512] Bluetooth: BNEP socket layer initialized
[   10.836319] systemd[1]: apt-daily.timer: Adding 54min 18.026159s random time.
[   10.994639] systemd[1]: apt-daily.timer: Adding 9h 26min 10.165957s random time.
[   11.202495] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2
[   11.202502] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2
[   11.202504] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2
[   11.202506] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2
[   11.202508] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2
[   11.382489] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.388237] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   11.397666] Ebtables v2.0 registered
[   11.496713] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   11.496818] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[   11.503598] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[   11.503698] iwlwifi 0000:02:00.0: Radio type=0x2-0x1-0x0
[   11.776158] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[   11.782967] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[   11.783106] iwlwifi 0000:02:00.0: Radio type=0x2-0x1-0x0
[   11.866158] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   11.881917] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   12.135232] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   12.159884] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   12.166886] tun: Universal TUN/TAP device driver, 1.6
[   12.166891] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   12.251107] virbr0: port 1(virbr0-nic) entered blocking state
[   12.251111] virbr0: port 1(virbr0-nic) entered disabled state
[   12.251203] device virbr0-nic entered promiscuous mode
[   12.255000] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   12.311057] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[   12.312049] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[   12.370154] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[   12.402496] virbr0: port 1(virbr0-nic) entered blocking state
[   12.402501] virbr0: port 1(virbr0-nic) entered listening state
[   12.462849] virbr0: port 1(virbr0-nic) entered disabled state
[   12.467058] device virbr0-nic left promiscuous mode
[   12.467086] virbr0: port 1(virbr0-nic) entered disabled state
[   12.610026] systemd[1]: apt-daily.timer: Adding 10h 5min 48.895577s random time.
[   12.945452] systemd[1]: apt-daily.timer: Adding 9h 32min 44.836845s random time.
[   14.993211] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   14.993274] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[   15.385209] systemd[1]: apt-daily.timer: Adding 24min 19.362202s random time.
[   15.599741] systemd[1]: apt-daily.timer: Adding 9h 41min 18.586156s random time.
[   18.585230] wlp2s0: authenticate with 04:a1:51:19:63:50
[   18.588077] wlp2s0: send auth to 04:a1:51:19:63:50 (try 1/3)
[   18.609211] wlp2s0: send auth to 04:a1:51:19:63:50 (try 2/3)
[   18.632303] wlp2s0: send auth to 04:a1:51:19:63:50 (try 3/3)
[   18.653675] wlp2s0: authentication with 04:a1:51:19:63:50 timed out
[   30.128697] wlp2s0: authenticate with 04:a1:51:19:63:50
[   30.130492] wlp2s0: send auth to 04:a1:51:19:63:50 (try 1/3)
[   30.153849] wlp2s0: send auth to 04:a1:51:19:63:50 (try 2/3)
[   30.173839] wlp2s0: send auth to 04:a1:51:19:63:50 (try 3/3)
[   30.196289] wlp2s0: authentication with 04:a1:51:19:63:50 timed out
[   33.894123] wlp2s0: authenticate with 04:a1:51:19:63:50
[   33.895820] wlp2s0: send auth to 04:a1:51:19:63:50 (try 1/3)
[   33.916220] wlp2s0: send auth to 04:a1:51:19:63:50 (try 2/3)
[   33.935124] wlp2s0: send auth to 04:a1:51:19:63:50 (try 3/3)
[   33.953339] wlp2s0: authentication with 04:a1:51:19:63:50 timed out
[   41.008559] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   41.549692] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[   41.568381] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[   43.361142] Bluetooth: RFCOMM TTY layer initialized
[   43.361156] Bluetooth: RFCOMM socket layer initialized
[   43.361164] Bluetooth: RFCOMM ver 1.11
[   44.211397] wlp2s0: authenticate with 04:a1:51:19:63:50
[   44.213113] wlp2s0: send auth to 04:a1:51:19:63:50 (try 1/3)
[   44.234827] wlp2s0: send auth to 04:a1:51:19:63:50 (try 2/3)
[   44.257303] wlp2s0: send auth to 04:a1:51:19:63:50 (try 3/3)
[   44.277143] wlp2s0: authentication with 04:a1:51:19:63:50 timed out
[   57.530691] fuse init (API version 7.24)
[   60.640946] wlp2s0: authenticate with 04:a1:51:19:63:50
[   60.642860] wlp2s0: send auth to 04:a1:51:19:63:50 (try 1/3)
[   60.661322] wlp2s0: send auth to 04:a1:51:19:63:50 (try 2/3)
[   60.681741] wlp2s0: send auth to 04:a1:51:19:63:50 (try 3/3)
[   60.701838] wlp2s0: authentication with 04:a1:51:19:63:50 timed out
[   66.006793] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   69.201432] wlp2s0: authenticate with 04:a1:51:19:63:50
[   69.203678] wlp2s0: send auth to 04:a1:51:19:63:50 (try 1/3)
[   69.226889] wlp2s0: send auth to 04:a1:51:19:63:50 (try 2/3)
[   69.248005] wlp2s0: send auth to 04:a1:51:19:63:50 (try 3/3)
[   69.269965] wlp2s0: authentication with 04:a1:51:19:63:50 timed out
[   82.427769] wlp2s0: authenticate with 04:a1:51:19:63:50
[   82.429646] wlp2s0: send auth to 04:a1:51:19:63:50 (try 1/3)
[   82.450279] wlp2s0: send auth to 04:a1:51:19:63:50 (try 2/3)
[   82.471296] wlp2s0: send auth to 04:a1:51:19:63:50 (try 3/3)
[   82.493438] wlp2s0: authentication with 04:a1:51:19:63:50 timed out
[   91.007673] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   98.297325] wlp2s0: authenticate with 04:a1:51:19:63:50
[   98.299489] wlp2s0: send auth to 04:a1:51:19:63:50 (try 1/3)
[   98.320766] wlp2s0: send auth to 04:a1:51:19:63:50 (try 2/3)
[   98.345096] wlp2s0: send auth to 04:a1:51:19:63:50 (try 3/3)
[   98.363939] wlp2s0: authentication with 04:a1:51:19:63:50 timed out
[  111.550102] wlp2s0: authenticate with 04:a1:51:19:63:50
[  111.551790] wlp2s0: send auth to 04:a1:51:19:63:50 (try 1/3)
[  111.572361] wlp2s0: send auth to 04:a1:51:19:63:50 (try 2/3)
[  111.592603] wlp2s0: send auth to 04:a1:51:19:63:50 (try 3/3)
[  111.612049] wlp2s0: authentication with 04:a1:51:19:63:50 timed out
[  116.009653] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
