*** Pre-CBMEM romstage console overflowed, log truncated! ***
roller enabled
[INFO ]  Detected system type: mobile
[DEBUG]  Setting up static northbridge registers... done
[DEBUG]  Initializing Graphics...
[DEBUG]  Back from systemagent_early_init()
[INFO ]  Intel ME early init
[INFO ]  Intel ME firmware is ready
[DEBUG]  ME: Requested 32MB UMA
[DEBUG]  Starting native Platform init
[DEBUG]  DMI: Running at X4 @ 5000MT/s
[DEBUG]  FMAP: area RW_MRC_CACHE found @ 900000 (65536 bytes)
[DEBUG]  Trying stored timings.
[DEBUG]  Starting Sandy Bridge RAM training (fast boot).
[DEBUG]  100MHz reference clock support: no
[DEBUG]  PLL_REF100_CFG value: 0x0
[DEBUG]  Trying CAS 9, tCK 384.
[DEBUG]  Found compatible clock, CAS pair.
[DEBUG]  Selected DRAM frequency: 666 MHz
[DEBUG]  Selected CAS latency   : 9T
[DEBUG]  MPLL busy... done in 50 us
[DEBUG]  MPLL frequency is set at : 666 MHz
[DEBUG]  Done dimm mapping
[DEBUG]  Update PCI-E configuration space:
[DEBUG]  PCI(0, 0, 0)[a0] = 0
[DEBUG]  PCI(0, 0, 0)[a4] = 2
[DEBUG]  PCI(0, 0, 0)[bc] = 82a00000
[DEBUG]  PCI(0, 0, 0)[a8] = 7b600000
[DEBUG]  PCI(0, 0, 0)[ac] = 2
[DEBUG]  PCI(0, 0, 0)[b8] = 80000000
[DEBUG]  PCI(0, 0, 0)[b0] = 80a00000
[DEBUG]  PCI(0, 0, 0)[b4] = 80800000
[DEBUG]  PCI(0, 0, 0)[7c] = 7f
[DEBUG]  PCI(0, 0, 0)[70] = fe000000
[DEBUG]  PCI(0, 0, 0)[74] = 1
[DEBUG]  PCI(0, 0, 0)[78] = fe000c00
[DEBUG]  Done memory map
[DEBUG]  Done io registers
[DEBUG]  t123: 1768, 9120, 500
[NOTE ]  ME: FWS2: 0x161f012e
[NOTE ]  ME:  Bist in progress: 0x0
[NOTE ]  ME:  ICC Status      : 0x3
[NOTE ]  ME:  Invoke MEBx     : 0x1
[NOTE ]  ME:  CPU replaced    : 0x0
[NOTE ]  ME:  MBP ready       : 0x1
[NOTE ]  ME:  MFS failure     : 0x0
[NOTE ]  ME:  Warm reset req  : 0x0
[NOTE ]  ME:  CPU repl valid  : 0x1
[NOTE ]  ME:  (Reserved)      : 0x0
[NOTE ]  ME:  FW update req   : 0x0
[NOTE ]  ME:  (Reserved)      : 0x0
[NOTE ]  ME:  Current state   : 0x1f
[NOTE ]  ME:  Current PM event: 0x6
[NOTE ]  ME:  Progress code   : 0x1
[NOTE ]  PASSED! Tell ME that DRAM is ready
[NOTE ]  ME: FWS2: 0x1650012e
[NOTE ]  ME:  Bist in progress: 0x0
[NOTE ]  ME:  ICC Status      : 0x3
[NOTE ]  ME:  Invoke MEBx     : 0x1
[NOTE ]  ME:  CPU replaced    : 0x0
[NOTE ]  ME:  MBP ready       : 0x1
[NOTE ]  ME:  MFS failure     : 0x0
[NOTE ]  ME:  Warm reset req  : 0x0
[NOTE ]  ME:  CPU repl valid  : 0x1
[NOTE ]  ME:  (Reserved)      : 0x0
[NOTE ]  ME:  FW update req   : 0x0
[NOTE ]  ME:  (Reserved)      : 0x0
[NOTE ]  ME:  Current state   : 0x50
[NOTE ]  ME:  Current PM event: 0x6
[NOTE ]  ME:  Progress code   : 0x1
[NOTE ]  ME: Requested BIOS Action: Continue to boot
[DEBUG]  ME: FW Partition Table      : OK
[DEBUG]  ME: Bringup Loader Failure  : NO
[DEBUG]  ME: Firmware Init Complete  : NO
[DEBUG]  ME: Manufacturing Mode      : NO
[DEBUG]  ME: Boot Options Present    : NO
[DEBUG]  ME: Update In Progress      : NO
[DEBUG]  ME: Current Working State   : Normal
[DEBUG]  ME: Current Operation State : Bring up
[DEBUG]  ME: Current Operation Mode  : Normal
[DEBUG]  ME: Error Code              : No Error
[DEBUG]  ME: Progress Phase          : BUP Phase
[DEBUG]  ME: Power Management Event  : Pseudo-global reset
[DEBUG]  ME: Progress Phase State    : 0x50
[DEBUG]  memcfg DDR3 ref clock 133 MHz
[DEBUG]  memcfg DDR3 clock 1330 MHz
[DEBUG]  memcfg channel assignment: A: 0, B  1, C  2
[DEBUG]  memcfg channel[0] config (00620010):
[DEBUG]     ECC inactive
[DEBUG]     enhanced interleave mode on
[DEBUG]     rank interleave on
[DEBUG]     DIMMA 4096 MB width x8 dual rank, selected
[DEBUG]     DIMMB 0 MB width x8 single rank
[DEBUG]  memcfg channel[1] config (00620010):
[DEBUG]     ECC inactive
[DEBUG]     enhanced interleave mode on
[DEBUG]     rank interleave on
[DEBUG]     DIMMA 4096 MB width x8 dual rank, selected
[DEBUG]     DIMMB 0 MB width x8 single rank
[DEBUG]  CBMEM:
[DEBUG]  IMD: root @ 0x7ffff000 254 entries.
[DEBUG]  IMD: root @ 0x7fffec00 62 entries.
[DEBUG]  Starting cbfs_boot_device
[DEBUG]  FMAP: area COREBOOT found @ 991000 (2551808 bytes)
[INFO ]  Booting from COREBOOT region
[DEBUG]  External stage cache:
[DEBUG]  IMD: root @ 0x803ff000 254 entries.
[DEBUG]  IMD: root @ 0x803fec00 62 entries.
[DEBUG]  CBMEM entry for DIMM info: 0x7ffdb000
[DEBUG]  SMM Memory Map
[DEBUG]  SMRAM       : 0x80000000 0x800000
[DEBUG]   Subregion 0: 0x80000000 0x300000
[DEBUG]   Subregion 1: 0x80300000 0x100000
[DEBUG]   Subregion 2: 0x80400000 0x400000
[DEBUG]  Normal boot
[DEBUG]  Starting cbfs_boot_device
[INFO ]  CBFS: Found 'fallback/postcar' @0x3f3c0 size 0x9d18 in mcache @0xfeff0fe4
[DEBUG]  Loading module at 0x7ffcb000 with entry 0x7ffcb031. filesize: 0x9548 memsize: 0xf988
[DEBUG]  Processing 484 relocs. Offset value of 0x7dfcb000
[DEBUG]  BS: romstage times (exec / console): total (unknown) / 4 ms


[NOTE ]  coreboot-25.12-669-gc940d20696b4-dirty Sun Mar 01 17:03:40 UTC 2026 x86_32 postcar starting (log level: 7)...
[DEBUG]  Normal boot
[DEBUG]  Starting cbfs_boot_device
[DEBUG]  FMAP: area COREBOOT found @ 991000 (2551808 bytes)
[INFO ]  Booting from COREBOOT region
[INFO ]  CBFS: Found 'fallback/ramstage' @0x1db80 size 0x1d799 in mcache @0x7fffea1c
[DEBUG]  Loading module at 0x7fe7f000 with entry 0x7fe7f000. filesize: 0x3b2a0 memsize: 0x14a470
[DEBUG]  Processing 4055 relocs. Offset value of 0x7be7f000
[DEBUG]  BS: postcar times (exec / console): total (unknown) / 0 ms


[NOTE ]  coreboot-25.12-669-gc940d20696b4-dirty Sun Mar 01 17:03:40 UTC 2026 x86_32 ramstage starting (log level: 7)...
[DEBUG]  Normal boot
[INFO ]  Enumerating buses...
[DEBUG]  Root Device scanning...
[DEBUG]  CPU_CLUSTER: 0 enabled
[DEBUG]  DOMAIN: 00000000 enabled
[DEBUG]  DOMAIN: 00000000 scanning...
[DEBUG]  PCI: pci_scan_bus for segment group 00 bus 00
[DEBUG]  PCI: 00:00:00.0 [8086/0104] enabled
[DEBUG]  PCI: 00:00:01.0 [8086/0101] disabled
[DEBUG]  PCI: 00:00:02.0 [8086/0116] enabled
[DEBUG]  PCI: 00:00:04.0 [8086/0103] disabled
[DEBUG]  PCI: 00:00:14.0 [8086/1e31] enabled
[DEBUG]  PCI: 00:00:16.0 [8086/1e3a] enabled
[DEBUG]  PCI: 00:00:16.1: Disabling device
[DEBUG]  PCI: 00:00:16.1 [8086/1e3b] disabled No operations
[DEBUG]  PCI: 00:00:16.2: Disabling device
[DEBUG]  PCI: 00:00:16.2 [8086/1e3c] disabled No operations
[DEBUG]  PCI: 00:00:16.3: Disabling device
[DEBUG]  PCI: 00:00:16.3 [8086/1e3d] disabled No operations
[DEBUG]  PCI: 00:00:19.0: Disabling device
[DEBUG]  PCI: 00:00:1a.0 [8086/1e2d] enabled
[DEBUG]  PCI: 00:00:1b.0 [8086/1e20] enabled
[DEBUG]  PCI: 00:00:1c.0: No downstream device
[INFO ]  PCH: PCIe Root Port coalescing is enabled
[DEBUG]  PCI: 00:00:1c.0 [8086/1e10] enabled
[DEBUG]  PCI: 00:00:1c.1: No downstream device
[DEBUG]  PCI: 00:00:1c.1: Disabling device
[DEBUG]  PCI: 00:00:1c.1 [8086/1e12] disabled
[DEBUG]  PCI: 00:00:1c.2: Found a downstream device
[DEBUG]  PCH: Remap PCIe function 2 to 1
[DEBUG]  PCI: 00:00:1c.2 [8086/1e14] enabled
[DEBUG]  PCI: 00:00:1c.3: Found a downstream device
[DEBUG]  PCH: Remap PCIe function 3 to 1
[DEBUG]  PCI: 00:00:1c.3 [8086/1e16] enabled
[DEBUG]  PCI: 00:00:1c.4: No downstream device
[DEBUG]  PCI: 00:00:1c.4: Disabling device
[DEBUG]  PCI: 00:00:1c.4: check set enabled
[DEBUG]  PCI: 00:00:1c.4 [8086/1e18] disabled
[DEBUG]  PCI: 00:00:1c.5: Found a downstream device
[DEBUG]  PCH: Remap PCIe function 5 to 1
[DEBUG]  PCI: 00:00:1c.5 [8086/1e1a] enabled
[DEBUG]  PCI: 00:00:1c.6: Found a downstream device
[DEBUG]  PCH: Remap PCIe function 6 to 1
[DEBUG]  PCI: 00:00:1c.6 [8086/1e1c] enabled
[DEBUG]  PCI: 00:00:1c.7: No downstream device
[DEBUG]  PCI: 00:00:1c.7: Disabling device
[DEBUG]  PCH: PCIe map 1c.1 -> 1c.6
[DEBUG]  PCH: PCIe map 1c.2 -> 1c.1
[DEBUG]  PCH: PCIe map 1c.3 -> 1c.2
[DEBUG]  PCH: PCIe map 1c.5 -> 1c.3
[DEBUG]  PCH: PCIe map 1c.6 -> 1c.5
[DEBUG]  PCI: 00:00:1d.0 [8086/1e26] enabled
[DEBUG]  PCI: 00:00:1e.0: Disabling device
[DEBUG]  PCI: 00:00:1e.0 [8086/2448] disabled
[DEBUG]  PCI: 00:00:1f.0 [8086/1e57] enabled
[DEBUG]  PCI: 00:00:1f.2 [8086/1e01] enabled
[DEBUG]  PCI: 00:00:1f.3 [8086/1e22] enabled
[DEBUG]  PCI: 00:00:1f.5: Disabling device
[DEBUG]  PCI: 00:00:1f.5 [8086/1e09] disabled No operations
[DEBUG]  PCI: 00:00:1f.6: Disabling device
[DEBUG]  PCI: 00:00:1f.6 [8086/1e24] disabled No operations
[DEBUG]  PCI: 00:00:1c.0 scanning...
[DEBUG]  PCI: pci_scan_bus for segment group 00 bus 01
[INFO ]  PCI: 00:00:1c.0: ASPM enabled L0s and L1 (no endpoint)
[INFO ]  PCI: 00:00:1c.0: Setting Max_Payload_Size to 128 for devices under this root port
[DEBUG]  scan_bus: bus PCI: 00:00:1c.0 finished in 0 msecs
[DEBUG]  PCI: 00:00:1c.1 scanning...
[DEBUG]  PCI: pci_scan_bus for segment group 00 bus 0a
[DEBUG]  PCI: 00:0a:00.0 [10ec/5209] enabled
[INFO ]  Enabling Common Clock Configuration
[INFO ]  ASPM: Enabled None
[DEBUG]  PCI: 00:0a:00.0: No LTR support
[INFO ]  PCI: 00:00:1c.1: Setting Max_Payload_Size to 128 for devices under this root port
[DEBUG]  scan_bus: bus PCI: 00:00:1c.1 finished in 0 msecs
[DEBUG]  PCI: 00:00:1c.2 scanning...
[DEBUG]  PCI: pci_scan_bus for segment group 00 bus 13
[DEBUG]  PCI: 00:13:00.0 [8086/088e] enabled
[INFO ]  Enabling Common Clock Configuration
[INFO ]  ASPM: Enabled L1
[DEBUG]  PCI: 00:13:00.0: No LTR support
[INFO ]  PCI: 00:00:1c.2: Setting Max_Payload_Size to 128 for devices under this root port
[DEBUG]  scan_bus: bus PCI: 00:00:1c.2 finished in 0 msecs
[DEBUG]  PCI: 00:00:1c.3 scanning...
[DEBUG]  PCI: pci_scan_bus for segment group 00 bus 1c
[DEBUG]  PCI: 00:1c:00.0 [14e4/16b0] enabled
[INFO ]  Enabling Common Clock Configuration
[INFO ]  ASPM: Enabled L0s and L1
[DEBUG]  PCI: 00:1c:00.0: No LTR support
[INFO ]  PCI: 00:00:1c.3: Setting Max_Payload_Size to 128 for devices under this root port
[DEBUG]  scan_bus: bus PCI: 00:00:1c.3 finished in 0 msecs
[DEBUG]  PCI: 00:00:1c.5 scanning...
[DEBUG]  PCI: pci_scan_bus for segment group 00 bus 1d
[INFO ]  PCI: 00:00:1c.5: ASPM enabled L0s and L1 (no endpoint)
[INFO ]  PCI: 00:00:1c.5: Setting Max_Payload_Size to 128 for devices under this root port
[WARN ]  PCI: 00:00:1c.5: Has a slow downstream device. Enumeration failed.
[DEBUG]  scan_bus: bus PCI: 00:00:1c.5 finished in 0 msecs
[DEBUG]  PCI: 00:00:1f.0 scanning...
[DEBUG]  scan_bus: bus PCI: 00:00:1f.0 finished in 0 msecs
[DEBUG]  PCI: 00:00:1f.3 scanning...
[DEBUG]  scan_bus: bus PCI: 00:00:1f.3 finished in 0 msecs
[DEBUG]  scan_bus: bus DOMAIN: 00000000 finished in 1 msecs
[DEBUG]  scan_bus: bus Root Device finished in 1 msecs
[INFO ]  done
[DEBUG]  BS: BS_DEV_ENUMERATE run times (exec / console): 2 / 0 ms
[DEBUG]  found VGA at PCI: 00:00:02.0
[DEBUG]  Setting up VGA for PCI: 00:00:02.0
[DEBUG]  Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 00000000
[DEBUG]  Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
[INFO ]  Allocating resources...
[INFO ]  Reading resources...
[DEBUG]  Adding PCIe enhanced config space BAR 0xf0000000-0xf4000000.
[DEBUG]  TOUUD 0x27b600000 TOLUD 0x82a00000 TOM 0x200000000
[DEBUG]  MEBASE 0x1fe000000
[DEBUG]  IGD decoded, subtracting 32M UMA and 2M GTT
[DEBUG]  TSEG base 0x80000000 size 8M
[INFO ]  Available memory below 4GB: 2048M
[INFO ]  Available memory above 4GB: 6070M
[INFO ]  Done reading resources.
[INFO ]  === Resource allocator: DOMAIN: 00000000 - Pass 1 (relative placement) ===
[DEBUG]   PCI: 00:00:1c.0 io: size: 0 align: 12 gran: 12 limit: ffff
[DEBUG]    NONE 18 *  [0x0 - 0x7ff] io
[DEBUG]   PCI: 00:00:1c.0 io: size: 1000 align: 12 gran: 12 limit: ffff done
[DEBUG]   PCI: 00:00:1c.0 mem: size: 0 align: 20 gran: 20 limit: ffffffff
[DEBUG]    NONE 10 *  [0x0 - 0x7fffff] mem
[DEBUG]   PCI: 00:00:1c.0 mem: size: 800000 align: 20 gran: 20 limit: ffffffff done
[DEBUG]   PCI: 00:00:1c.0 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff
[DEBUG]    NONE 14 *  [0x0 - 0xfffffff] prefmem
[DEBUG]   PCI: 00:00:1c.0 prefmem: size: 10000000 align: 20 gran: 20 limit: ffffffffffffffff done
[DEBUG]   PCI: 00:00:1c.1 io: size: 0 align: 12 gran: 12 limit: ffff
[DEBUG]    NONE 18 *  [0x0 - 0x7ff] io
[DEBUG]   PCI: 00:00:1c.1 io: size: 1000 align: 12 gran: 12 limit: ffff done
[DEBUG]   PCI: 00:00:1c.1 mem: size: 0 align: 20 gran: 20 limit: ffffffff
[DEBUG]    NONE 10 *  [0x0 - 0x7fffff] mem
[DEBUG]    PCI: 00:0a:00.0 10 *  [0x800000 - 0x800fff] mem
[DEBUG]   PCI: 00:00:1c.1 mem: size: 900000 align: 20 gran: 20 limit: ffffffff done
[DEBUG]   PCI: 00:00:1c.1 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff
[DEBUG]    NONE 14 *  [0x0 - 0xfffffff] prefmem
[DEBUG]   PCI: 00:00:1c.1 prefmem: size: 10000000 align: 20 gran: 20 limit: ffffffffffffffff done
[DEBUG]   PCI: 00:00:1c.2 io: size: 0 align: 12 gran: 12 limit: ffff
[DEBUG]    NONE 18 *  [0x0 - 0x7ff] io
[DEBUG]   PCI: 00:00:1c.2 io: size: 1000 align: 12 gran: 12 limit: ffff done
[DEBUG]   PCI: 00:00:1c.2 mem: size: 0 align: 20 gran: 20 limit: ffffffff
[DEBUG]    PCI: 00:13:00.0 10 *  [0x0 - 0x1fff] mem
[DEBUG]    NONE 10 *  [0x2000 - 0x801fff] mem
[DEBUG]   PCI: 00:00:1c.2 mem: size: 900000 align: 20 gran: 20 limit: ffffffff done
[DEBUG]   PCI: 00:00:1c.2 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff
[DEBUG]    NONE 14 *  [0x0 - 0xfffffff] prefmem
[DEBUG]   PCI: 00:00:1c.2 prefmem: size: 10000000 align: 20 gran: 20 limit: ffffffffffffffff done
[DEBUG]   PCI: 00:00:1c.3 io: size: 0 align: 12 gran: 12 limit: ffff
[DEBUG]   PCI: 00:00:1c.3 io: size: 0 align: 12 gran: 12 limit: ffff done
[DEBUG]   PCI: 00:00:1c.3 mem: size: 0 align: 20 gran: 20 limit: ffffffff
[DEBUG]   PCI: 00:00:1c.3 mem: size: 0 align: 20 gran: 20 limit: ffffffff done
[DEBUG]   PCI: 00:00:1c.3 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff
[DEBUG]    PCI: 00:1c:00.0 10 *  [0x0 - 0xffff] prefmem
[DEBUG]    PCI: 00:1c:00.0 18 *  [0x10000 - 0x1ffff] prefmem
[DEBUG]   PCI: 00:00:1c.3 prefmem: size: 100000 align: 20 gran: 20 limit: ffffffff done
[DEBUG]   PCI: 00:00:1c.5 io: size: 0 align: 12 gran: 12 limit: ffff
[DEBUG]    NONE 18 *  [0x0 - 0x7ff] io
[DEBUG]   PCI: 00:00:1c.5 io: size: 1000 align: 12 gran: 12 limit: ffff done
[DEBUG]   PCI: 00:00:1c.5 mem: size: 0 align: 20 gran: 20 limit: ffffffff
[DEBUG]    NONE 10 *  [0x0 - 0x7fffff] mem
[DEBUG]   PCI: 00:00:1c.5 mem: size: 800000 align: 20 gran: 20 limit: ffffffff done
[DEBUG]   PCI: 00:00:1c.5 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff
[DEBUG]    NONE 14 *  [0x0 - 0xfffffff] prefmem
[DEBUG]   PCI: 00:00:1c.5 prefmem: size: 10000000 align: 20 gran: 20 limit: ffffffffffffffff done
[INFO ]  === Resource allocator: DOMAIN: 00000000 - Pass 2 (allocating resources) ===
[DEBUG]  DOMAIN: 00000000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff
[DEBUG]   avoid_fixed_resources: PCI: 00:00:1f.0 10000000 base 00000000 limit 00000fff io (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00:1f.0 10000100 base fed40000 limit fed44fff io (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00:1f.3 20 base 00000400 limit 0000041f io (fixed)
[INFO ]   DOMAIN: 00000000: Resource ranges:
[INFO ]   * Base: 1000, Size: f000, Tag: 100
[DEBUG]    PCI: 00:00:1c.0 1c *  [0xf000 - 0xffff] limit: ffff io
[DEBUG]    PCI: 00:00:1c.1 1c *  [0xe000 - 0xefff] limit: efff io
[DEBUG]    PCI: 00:00:1c.2 1c *  [0xd000 - 0xdfff] limit: dfff io
[DEBUG]    PCI: 00:00:1c.5 1c *  [0xc000 - 0xcfff] limit: cfff io
[DEBUG]    PCI: 00:00:02.0 20 *  [0xbfc0 - 0xbfff] limit: bfff io
[DEBUG]    PCI: 00:00:1f.2 20 *  [0xbfa0 - 0xbfbf] limit: bfbf io
[DEBUG]    PCI: 00:00:1f.2 10 *  [0xbf98 - 0xbf9f] limit: bf9f io
[DEBUG]    PCI: 00:00:1f.2 18 *  [0xbf90 - 0xbf97] limit: bf97 io
[DEBUG]    PCI: 00:00:1f.2 14 *  [0xbf8c - 0xbf8f] limit: bf8f io
[DEBUG]    PCI: 00:00:1f.2 1c *  [0xbf88 - 0xbf8b] limit: bf8b io
[DEBUG]  DOMAIN: 00000000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff done
[DEBUG]  DOMAIN: 00000000 mem: base: 80000000 size: 0 align: 0 gran: 0 limit: efffffff
[DEBUG]  DOMAIN: 00000000 mem: base: 100000000 size: 0 align: 0 gran: 0 limit: fffffffff
[DEBUG]   avoid_fixed_resources: PCI: 00:00:00.0 60 base f0000000 limit f3ffffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00:00.0 03 base fed10000 limit fed17fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00:00.0 04 base fed18000 limit fed18fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00:00.0 05 base fed19000 limit fed19fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00:00.0 06 base 00000000 limit 0009ffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00:00.0 07 base 00100000 limit 7fffffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00:00.0 08 base 100000000 limit 27b5fffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00:00.0 09 base 80000000 limit 829fffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00:00.0 0a base 000a0000 limit 000bffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00:00.0 0b base 000c0000 limit 000fffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00:00.0 0c base 20000000 limit 201fffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00:00.0 0d base 40000000 limit 401fffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00:1f.0 02 base ff000000 limit ffffffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00:1f.0 03 base fec00000 limit fec00fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00:1f.0 04 base fed00000 limit fed00fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00:1f.0 05 base fed20000 limit fed3ffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00:1f.0 06 base fed45000 limit fed8ffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00:1f.0 f0 base fed1c000 limit fed1ffff mem (fixed)
[INFO ]   DOMAIN: 00000000: Resource ranges:
[INFO ]   * Base: 82a00000, Size: 6d600000, Tag: 200
[INFO ]   * Base: 27b600000, Size: d84a00000, Tag: 200
[DEBUG]    PCI: 00:00:02.0 18 *  [0xe0000000 - 0xefffffff] limit: efffffff prefmem
[DEBUG]    PCI: 00:00:02.0 10 *  [0xdfc00000 - 0xdfffffff] limit: dfffffff mem
[DEBUG]    PCI: 00:00:1c.0 24 *  [0xff0000000 - 0xfffffffff] limit: fffffffff prefmem
[DEBUG]    PCI: 00:00:1c.1 24 *  [0xfe0000000 - 0xfefffffff] limit: fefffffff prefmem
[DEBUG]    PCI: 00:00:1c.2 24 *  [0xfd0000000 - 0xfdfffffff] limit: fdfffffff prefmem
[DEBUG]    PCI: 00:00:1c.5 24 *  [0xfc0000000 - 0xfcfffffff] limit: fcfffffff prefmem
[DEBUG]    PCI: 00:00:1c.1 20 *  [0xdf300000 - 0xdfbfffff] limit: dfbfffff mem
[DEBUG]    PCI: 00:00:1c.2 20 *  [0xdea00000 - 0xdf2fffff] limit: df2fffff mem
[DEBUG]    PCI: 00:00:1c.0 20 *  [0xde200000 - 0xde9fffff] limit: de9fffff mem
[DEBUG]    PCI: 00:00:1c.5 20 *  [0xdda00000 - 0xde1fffff] limit: de1fffff mem
[DEBUG]    PCI: 00:00:1c.3 24 *  [0xdd900000 - 0xdd9fffff] limit: dd9fffff prefmem
[DEBUG]    PCI: 00:00:14.0 10 *  [0xdd8f0000 - 0xdd8fffff] limit: dd8fffff mem
[DEBUG]    PCI: 00:00:1b.0 10 *  [0xdd8ec000 - 0xdd8effff] limit: dd8effff mem
[DEBUG]    PCI: 00:00:1f.2 24 *  [0xdd8eb000 - 0xdd8eb7ff] limit: dd8eb7ff mem
[DEBUG]    PCI: 00:00:1a.0 10 *  [0xdd8ea000 - 0xdd8ea3ff] limit: dd8ea3ff mem
[DEBUG]    PCI: 00:00:1d.0 10 *  [0xdd8e9000 - 0xdd8e93ff] limit: dd8e93ff mem
[DEBUG]    PCI: 00:00:1f.3 10 *  [0xdd8e8000 - 0xdd8e80ff] limit: dd8e80ff mem
[DEBUG]    PCI: 00:00:16.0 10 *  [0xdd8e7000 - 0xdd8e700f] limit: dd8e700f mem
[DEBUG]  DOMAIN: 00000000 mem: base: 80000000 size: 0 align: 0 gran: 0 limit: efffffff done
[DEBUG]  DOMAIN: 00000000 mem: base: 100000000 size: 0 align: 0 gran: 0 limit: fffffffff done
[DEBUG]    NONE 18 *  [0xf000 - 0xf7ff] limit: f7ff io
[DEBUG]    NONE 14 *  [0xff0000000 - 0xfffffffff] limit: fffffffff prefmem
[DEBUG]    NONE 10 *  [0xde200000 - 0xde9fffff] limit: de9fffff mem
[DEBUG]    NONE 18 *  [0xe000 - 0xe7ff] limit: e7ff io
[DEBUG]    NONE 14 *  [0xfe0000000 - 0xfefffffff] limit: fefffffff prefmem
[DEBUG]    PCI: 00:0a:00.0 10 *  [0xdfb00000 - 0xdfb00fff] limit: dfb00fff mem
[DEBUG]    NONE 10 *  [0xdf300000 - 0xdfafffff] limit: dfafffff mem
[DEBUG]    NONE 18 *  [0xd000 - 0xd7ff] limit: d7ff io
[DEBUG]    NONE 14 *  [0xfd0000000 - 0xfdfffffff] limit: fdfffffff prefmem
[DEBUG]    PCI: 00:13:00.0 10 *  [0xdea00000 - 0xdea01fff] limit: dea01fff mem
[DEBUG]    NONE 10 *  [0xdea02000 - 0xdf201fff] limit: df201fff mem
[DEBUG]    PCI: 00:1c:00.0 10 *  [0xdd900000 - 0xdd90ffff] limit: dd90ffff prefmem
[DEBUG]    PCI: 00:1c:00.0 18 *  [0xdd910000 - 0xdd91ffff] limit: dd91ffff prefmem
[DEBUG]    NONE 18 *  [0xc000 - 0xc7ff] limit: c7ff io
[DEBUG]    NONE 14 *  [0xfc0000000 - 0xfcfffffff] limit: fcfffffff prefmem
[DEBUG]    NONE 10 *  [0xdda00000 - 0xde1fffff] limit: de1fffff mem
[INFO ]  === Resource allocator: DOMAIN: 00000000 - resource allocation complete ===
[DEBUG]  PCI: 00:00:02.0 10 <- [0x00000000dfc00000 - 0x00000000dfffffff] size 0x00400000 gran 0x16 mem64
[DEBUG]  PCI: 00:00:02.0 18 <- [0x00000000e0000000 - 0x00000000efffffff] size 0x10000000 gran 0x1c prefmem64
[DEBUG]  PCI: 00:00:02.0 20 <- [0x000000000000bfc0 - 0x000000000000bfff] size 0x00000040 gran 0x06 io
[DEBUG]  PCI: 00:00:14.0 10 <- [0x00000000dd8f0000 - 0x00000000dd8fffff] size 0x00010000 gran 0x10 mem64
[DEBUG]  PCI: 00:00:16.0 10 <- [0x00000000dd8e7000 - 0x00000000dd8e700f] size 0x00000010 gran 0x04 mem64
[DEBUG]  PCI: 00:00:1a.0 10 <- [0x00000000dd8ea000 - 0x00000000dd8ea3ff] size 0x00000400 gran 0x0a mem
[DEBUG]  PCI: 00:00:1b.0 10 <- [0x00000000dd8ec000 - 0x00000000dd8effff] size 0x00004000 gran 0x0e mem64
[DEBUG]  PCI: 00:00:1c.0 1c <- [0x000000000000f000 - 0x000000000000ffff] size 0x00001000 gran 0x0c seg 00 bus 01 io
[DEBUG]  PCI: 00:00:1c.0 24 <- [0x0000000ff0000000 - 0x0000000fffffffff] size 0x10000000 gran 0x14 seg 00 bus 01 prefmem
[DEBUG]  PCI: 00:00:1c.0 20 <- [0x00000000de200000 - 0x00000000de9fffff] size 0x00800000 gran 0x14 seg 00 bus 01 mem
[DEBUG]  PCI: 00:00:1c.1 1c <- [0x000000000000e000 - 0x000000000000efff] size 0x00001000 gran 0x0c seg 00 bus 0a io
[DEBUG]  PCI: 00:00:1c.1 24 <- [0x0000000fe0000000 - 0x0000000fefffffff] size 0x10000000 gran 0x14 seg 00 bus 0a prefmem
[DEBUG]  PCI: 00:00:1c.1 20 <- [0x00000000df300000 - 0x00000000dfbfffff] size 0x00900000 gran 0x14 seg 00 bus 0a mem
[DEBUG]  PCI: 00:0a:00.0 10 <- [0x00000000dfb00000 - 0x00000000dfb00fff] size 0x00001000 gran 0x0c mem
[DEBUG]  PCI: 00:00:1c.2 1c <- [0x000000000000d000 - 0x000000000000dfff] size 0x00001000 gran 0x0c seg 00 bus 13 io
[DEBUG]  PCI: 00:00:1c.2 24 <- [0x0000000fd0000000 - 0x0000000fdfffffff] size 0x10000000 gran 0x14 seg 00 bus 13 prefmem
[DEBUG]  PCI: 00:00:1c.2 20 <- [0x00000000dea00000 - 0x00000000df2fffff] size 0x00900000 gran 0x14 seg 00 bus 13 mem
[DEBUG]  PCI: 00:13:00.0 10 <- [0x00000000dea00000 - 0x00000000dea01fff] size 0x00002000 gran 0x0d mem64
[DEBUG]  PCI: 00:00:1c.3 1c <- [0x000000000000ffff - 0x000000000000fffe] size 0x00000000 gran 0x0c seg 00 bus 1c io
[DEBUG]  PCI: 00:00:1c.3 24 <- [0x00000000dd900000 - 0x00000000dd9fffff] size 0x00100000 gran 0x14 seg 00 bus 1c prefmem
[DEBUG]  PCI: 00:00:1c.3 20 <- [0x00000000ffffffff - 0x00000000fffffffe] size 0x00000000 gran 0x14 seg 00 bus 1c mem
[DEBUG]  PCI: 00:1c:00.0 10 <- [0x00000000dd900000 - 0x00000000dd90ffff] size 0x00010000 gran 0x10 prefmem64
[DEBUG]  PCI: 00:1c:00.0 18 <- [0x00000000dd910000 - 0x00000000dd91ffff] size 0x00010000 gran 0x10 prefmem64
[DEBUG]  PCI: 00:00:1c.5 1c <- [0x000000000000c000 - 0x000000000000cfff] size 0x00001000 gran 0x0c seg 00 bus 1d io
[DEBUG]  PCI: 00:00:1c.5 24 <- [0x0000000fc0000000 - 0x0000000fcfffffff] size 0x10000000 gran 0x14 seg 00 bus 1d prefmem
[DEBUG]  PCI: 00:00:1c.5 20 <- [0x00000000dda00000 - 0x00000000de1fffff] size 0x00800000 gran 0x14 seg 00 bus 1d mem
[DEBUG]  PCI: 00:00:1d.0 10 <- [0x00000000dd8e9000 - 0x00000000dd8e93ff] size 0x00000400 gran 0x0a mem
[DEBUG]  PCI: 00:00:1f.2 10 <- [0x000000000000bf98 - 0x000000000000bf9f] size 0x00000008 gran 0x03 io
[DEBUG]  PCI: 00:00:1f.2 14 <- [0x000000000000bf8c - 0x000000000000bf8f] size 0x00000004 gran 0x02 io
[DEBUG]  PCI: 00:00:1f.2 18 <- [0x000000000000bf90 - 0x000000000000bf97] size 0x00000008 gran 0x03 io
[DEBUG]  PCI: 00:00:1f.2 1c <- [0x000000000000bf88 - 0x000000000000bf8b] size 0x00000004 gran 0x02 io
[DEBUG]  PCI: 00:00:1f.2 20 <- [0x000000000000bfa0 - 0x000000000000bfbf] size 0x00000020 gran 0x05 io
[DEBUG]  PCI: 00:00:1f.2 24 <- [0x00000000dd8eb000 - 0x00000000dd8eb7ff] size 0x00000800 gran 0x0b mem
[DEBUG]  PCI: 00:00:1f.3 10 <- [0x00000000dd8e8000 - 0x00000000dd8e80ff] size 0x00000100 gran 0x08 mem64
[INFO ]  Done setting resources.
[INFO ]  Done allocating resources.
[DEBUG]  BS: BS_DEV_RESOURCES run times (exec / console): 2 / 1 ms
[INFO ]  Enabling resources...
[DEBUG]  PCI: 00:00:00.0 subsystem <- 1025/0737
[DEBUG]  PCI: 00:00:00.0 cmd <- 06
[DEBUG]  PCI: 00:00:02.0 subsystem <- 1025/0737
[DEBUG]  PCI: 00:00:02.0 cmd <- 03
[DEBUG]  PCI: 00:00:14.0 subsystem <- 1025/0737
[DEBUG]  PCI: 00:00:14.0 cmd <- 102
[DEBUG]  PCI: 00:00:16.0 subsystem <- 1025/0737
[DEBUG]  PCI: 00:00:16.0 cmd <- 02
[DEBUG]  PCI: 00:00:1a.0 subsystem <- 1025/0737
[DEBUG]  PCI: 00:00:1a.0 cmd <- 102
[DEBUG]  PCI: 00:00:1b.0 subsystem <- 1025/0737
[DEBUG]  PCI: 00:00:1b.0 cmd <- 102
[DEBUG]  PCI: 00:00:1c.0 bridge ctrl <- 0013
[DEBUG]  PCI: 00:00:1c.0 subsystem <- 1025/0737
[DEBUG]  PCI: 00:00:1c.0 cmd <- 107
[DEBUG]  PCI: 00:00:1c.1 bridge ctrl <- 0013
[DEBUG]  PCI: 00:00:1c.1 subsystem <- 1025/0737
[DEBUG]  PCI: 00:00:1c.1 cmd <- 107
[DEBUG]  PCI: 00:00:1c.2 bridge ctrl <- 0013
[DEBUG]  PCI: 00:00:1c.2 subsystem <- 1025/0737
[DEBUG]  PCI: 00:00:1c.2 cmd <- 107
[DEBUG]  PCI: 00:00:1c.3 bridge ctrl <- 0013
[DEBUG]  PCI: 00:00:1c.3 subsystem <- 1025/0737
[DEBUG]  PCI: 00:00:1c.3 cmd <- 106
[DEBUG]  PCI: 00:00:1c.5 bridge ctrl <- 0013
[DEBUG]  PCI: 00:00:1c.5 subsystem <- 1025/0737
[DEBUG]  PCI: 00:00:1c.5 cmd <- 107
[DEBUG]  PCI: 00:00:1d.0 subsystem <- 1025/0737
[DEBUG]  PCI: 00:00:1d.0 cmd <- 102
[DEBUG]  PCI: 00:00:1f.0 subsystem <- 1025/0737
[DEBUG]  PCI: 00:00:1f.0 cmd <- 107
[DEBUG]  PCI: 00:00:1f.2 subsystem <- 1025/0737
[DEBUG]  PCI: 00:00:1f.2 cmd <- 03
[DEBUG]  PCI: 00:00:1f.3 subsystem <- 1025/0737
[DEBUG]  PCI: 00:00:1f.3 cmd <- 103
[DEBUG]  PCI: 00:0a:00.0 cmd <- 02
[DEBUG]  PCI: 00:13:00.0 cmd <- 02
[DEBUG]  PCI: 00:1c:00.0 subsystem <- 1025/0737
[DEBUG]  PCI: 00:1c:00.0 cmd <- 102
[INFO ]  done.
[INFO ]  Initializing devices...
[DEBUG]  Root Device init
[DEBUG]  Replaying EC dump ...done
[DEBUG]  Root Device init finished in 22 msecs
[DEBUG]  CPU_CLUSTER: 0 init
[DEBUG]  microcode: sig=0x206a7 pf=0x10 revision=0x2f
[DEBUG]  Starting cbfs_boot_device
[DEBUG]  FMAP: area COREBOOT found @ 991000 (2551808 bytes)
[INFO ]  Booting from COREBOOT region
[INFO ]  CBFS: Found 'cpu_microcode_blob.bin' @0x80 size 0x6800 in mcache @0x7fffe98c
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  LAPIC 0x0 in XAPIC mode.
[DEBUG]  MTRR: Physical address space:
[DEBUG]  0x0000000000000000 - 0x000000000009ffff size 0x000a0000 type 6
[DEBUG]  0x00000000000a0000 - 0x00000000000bffff size 0x00020000 type 0
[DEBUG]  0x00000000000c0000 - 0x000000007fffffff size 0x7ff40000 type 6
[DEBUG]  0x0000000080000000 - 0x00000000dfffffff size 0x60000000 type 0
[DEBUG]  0x00000000e0000000 - 0x00000000efffffff size 0x10000000 type 1
[DEBUG]  0x00000000f0000000 - 0x00000000ffffffff size 0x10000000 type 0
[DEBUG]  0x0000000100000000 - 0x000000027b5fffff size 0x17b600000 type 6
[DEBUG]  0x0000000fc0000000 - 0x0000000fffffffff size 0x40000000 type 0
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x250 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x258 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x259 0x0000000000000000
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x268 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x269 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26a 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26b 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26c 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26d 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26e 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26f 0x0606060606060606
[DEBUG]  apic_id 0x0 setup mtrr for CPU physical address size: 36 bits
[DEBUG]  MTRR: default type WB/UC MTRR counts: 5/7.
[DEBUG]  MTRR: WB selected as default type.
[DEBUG]  MTRR: 0 base 0x0000000080000000 mask 0x0000000fc0000000 type 0
[DEBUG]  MTRR: 1 base 0x00000000c0000000 mask 0x0000000fe0000000 type 0
[DEBUG]  MTRR: 2 base 0x00000000e0000000 mask 0x0000000ff0000000 type 1
[DEBUG]  MTRR: 3 base 0x00000000f0000000 mask 0x0000000ff0000000 type 0
[DEBUG]  MTRR: 4 base 0x0000000fc0000000 mask 0x0000000fc0000000 type 0

[DEBUG]  MTRR check
[DEBUG]  Fixed MTRRs   : Enabled
[DEBUG]  Variable MTRRs: Enabled

[DEBUG]  CPU has 2 cores, 4 threads enabled.
[DEBUG]  Setting up SMI for CPU
[INFO ]  Will perform SMM setup.
[INFO ]  CPU: Intel(R) Core(TM) i3-2370M CPU @ 2.40GHz.
[INFO ]  LAPIC 0x0 in XAPIC mode.
[DEBUG]  CPU: APIC: 00 enabled
[DEBUG]  CPU: APIC: 01 enabled
[DEBUG]  CPU: APIC: 02 enabled
[DEBUG]  CPU: APIC: 03 enabled
[DEBUG]  Loading module at 0x00030000 with entry 0x00030000. filesize: 0x178 memsize: 0x178
[DEBUG]  Processing 16 relocs. Offset value of 0x00030000
[DEBUG]  Attempting to start 3 APs
[DEBUG]  Waiting for 10ms after sending INIT.
[DEBUG]  Waiting for SIPI to complete...
[DEBUG]  done.
[DEBUG]  Waiting for SIPI to complete...
[INFO ]  LAPIC 0x1 in XAPIC mode.
[DEBUG]  done.
[INFO ]  AP: slot 1 apic_id 1, MCU rev: 0x0000002f
[INFO ]  LAPIC 0x2 in XAPIC mode.
[INFO ]  LAPIC 0x3 in XAPIC mode.
[INFO ]  AP: slot 2 apic_id 2, MCU rev: 0x0000002f
[INFO ]  AP: slot 3 apic_id 3, MCU rev: 0x0000002f
[DEBUG]  Loading module at 0x00038000 with entry 0x00038000. filesize: 0x1a0 memsize: 0x1a0
[DEBUG]  Processing 9 relocs. Offset value of 0x00038000
[DEBUG]  smm_module_setup_stub: stack_top = 0x80001000
[DEBUG]  smm_module_setup_stub: per cpu stack_size = 0x400
[DEBUG]  smm_module_setup_stub: runtime.smm_size = 0x10000
[DEBUG]  SMM Module: stub loaded at 38000. Will call 0x7fe9ee0d
[DEBUG]  Installing permanent SMM handler to 0x80000000
[DEBUG]  HANDLER      [0x802fb000-0x802ff587]

[DEBUG]  CPU 0
[DEBUG]    ss0        [0x802fac00-0x802fafff]
[DEBUG]    stub0      [0x802f3000-0x802f319f]

[DEBUG]  CPU 1
[DEBUG]    ss1        [0x802fa800-0x802fabff]
[DEBUG]    stub1      [0x802f2c00-0x802f2d9f]

[DEBUG]  CPU 2
[DEBUG]    ss2        [0x802fa400-0x802fa7ff]
[DEBUG]    stub2      [0x802f2800-0x802f299f]

[DEBUG]  CPU 3
[DEBUG]    ss3        [0x802fa000-0x802fa3ff]
[DEBUG]    stub3      [0x802f2400-0x802f259f]

[DEBUG]  stacks       [0x80000000-0x80000fff]
[DEBUG]  Loading module at 0x802fb000 with entry 0x802fb7a6. filesize: 0x4450 memsize: 0x4588
[DEBUG]  Processing 272 relocs. Offset value of 0x802fb000
[DEBUG]  FMAP: area SMMSTORE found @ 910000 (524288 bytes)
[DEBUG]  smm store: 8 # blocks with size 0x10000
[DEBUG]  Loading module at 0x802f3000 with entry 0x802f3000. filesize: 0x1a0 memsize: 0x1a0
[DEBUG]  Processing 9 relocs. Offset value of 0x802f3000
[DEBUG]  smm_module_setup_stub: stack_top = 0x80001000
[DEBUG]  smm_module_setup_stub: per cpu stack_size = 0x400
[DEBUG]  smm_module_setup_stub: runtime.smm_size = 0x300000
[DEBUG]  SMM Module: placing smm entry code at 802f2c00,  cpu # 0x1
[DEBUG]  SMM Module: placing smm entry code at 802f2800,  cpu # 0x2
[DEBUG]  SMM Module: placing smm entry code at 802f2400,  cpu # 0x3
[DEBUG]  SMM Module: stub loaded at 802f3000. Will call 0x802fb7a6
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802eb000, cpu = 0
[DEBUG]  In relocation handler: cpu 0
[DEBUG]  New SMBASE=0x802eb000 IEDBASE=0x80400000
[DEBUG]  Writing SMRR. base = 0x80000006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802eac00, cpu = 1
[DEBUG]  In relocation handler: cpu 1
[DEBUG]  New SMBASE=0x802eac00 IEDBASE=0x80400000
[DEBUG]  Writing SMRR. base = 0x80000006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802ea800, cpu = 2
[DEBUG]  In relocation handler: cpu 2
[DEBUG]  New SMBASE=0x802ea800 IEDBASE=0x80400000
[DEBUG]  Writing SMRR. base = 0x80000006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802ea400, cpu = 3
[DEBUG]  In relocation handler: cpu 3
[DEBUG]  New SMBASE=0x802ea400 IEDBASE=0x80400000
[DEBUG]  Writing SMRR. base = 0x80000006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  Initializing CPU #0
[DEBUG]  CPU: vendor Intel device 206a7
[DEBUG]  CPU: family 06, model 2a, stepping 07
[INFO ]  CPU: Intel(R) Core(TM) i3-2370M CPU @ 2.40GHz.
[INFO ]  CPU: cpuid(1) 0x206a7
[INFO ]  CPU: AES NOT supported
[INFO ]  CPU: TXT NOT supported
[INFO ]  CPU: VT supported
[DEBUG]  VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL status: locked
[INFO ]  APIC: 00: PP0 current limit not set in devicetree
[INFO ]  APIC: 00: PP0 PSI0 not set in devicetree
[INFO ]  APIC: 00: PP0 PSI1 not set in devicetree
[INFO ]  APIC: 00: PP0 PSI2 not set in devicetree
[INFO ]  APIC: 00: PP1 current limit not set in devicetree
[INFO ]  APIC: 00: PP1 PSI0 not set in devicetree
[INFO ]  APIC: 00: PP1 PSI1 not set in devicetree
[INFO ]  APIC: 00: PP1 PSI2 not set in devicetree
[INFO ]  APIC: 00: Programmable ratio limit for turbo mode is disabled
[DEBUG]  cpu: energy policy set to 6
[DEBUG]  model_x06ax: frequency set to 2400
[INFO ]  Turbo is unavailable
[INFO ]  CPU #0 initialized
[INFO ]  Initializing CPU #1
[INFO ]  Initializing CPU #2
[INFO ]  Initializing CPU #3
[DEBUG]  CPU: vendor Intel device 206a7
[DEBUG]  CPU: family 06, model 2a, stepping 07
[DEBUG]  CPU: vendor Intel device 206a7
[DEBUG]  CPU: family 06, model 2a, stepping 07
[DEBUG]  CPU: vendor Intel device 206a7
[DEBUG]  CPU: family 06, model 2a, stepping 07
[INFO ]  CPU: Intel(R) Core(TM) i3-2370M CPU @ 2.40GHz.
[INFO ]  CPU: cpuid(1) 0x206a7
[INFO ]  CPU: Intel(R) Core(TM) i3-2370M CPU @ 2.40GHz.
[INFO ]  CPU: AES NOT supported
[INFO ]  CPU: TXT NOT supported
[INFO ]  CPU: VT supported
[INFO ]  CPU: cpuid(1) 0x206a7
[DEBUG]  VMX status: enabled
[INFO ]  CPU: AES NOT supported
[INFO ]  CPU: TXT NOT supported
[INFO ]  CPU: VT supported
[DEBUG]  IA32_FEATURE_CONTROL status: locked
[DEBUG]  VMX status: enabled
[INFO ]  CPU: Intel(R) Core(TM) i3-2370M CPU @ 2.40GHz.
[INFO ]  APIC: 02: Programmable ratio limit for turbo mode is disabled
[DEBUG]  IA32_FEATURE_CONTROL status: locked
[INFO ]  CPU: cpuid(1) 0x206a7
[INFO ]  APIC: 03: Programmable ratio limit for turbo mode is disabled
[DEBUG]  cpu: energy policy set to 6
[INFO ]  CPU: AES NOT supported
[INFO ]  CPU: TXT NOT supported
[INFO ]  CPU: VT supported
[DEBUG]  model_x06ax: frequency set to 2400
[DEBUG]  cpu: energy policy set to 6
[INFO ]  CPU #2 initialized
[DEBUG]  VMX status: enabled
[DEBUG]  model_x06ax: frequency set to 2400
[INFO ]  CPU #3 initialized
[DEBUG]  IA32_FEATURE_CONTROL status: locked
[INFO ]  APIC: 01: Programmable ratio limit for turbo mode is disabled
[DEBUG]  cpu: energy policy set to 6
[DEBUG]  model_x06ax: frequency set to 2400
[INFO ]  CPU #1 initialized
[INFO ]  bsp_do_flight_plan done after 12 msecs.
[DEBUG]  SMI_STS: 
[DEBUG]  GPE0_STS: GPIO15 GPIO14 GPIO10 GPIO9 GPIO8 GPIO6 GPIO2 GPIO0 
[DEBUG]  ALT_GP_SMI_STS: GPI15 GPI14 GPI11 GPI10 GPI9 GPI8 GPI7 GPI6 GPI4 GPI3 GPI2 GPI1 GPI0 
[DEBUG]  TCO_STS: 
[DEBUG]  Locking SMM.
[DEBUG]  MTRR: TEMPORARY Physical address space:
[DEBUG]  0x0000000000000000 - 0x000000000009ffff size 0x000a0000 type 6
[DEBUG]  0x00000000000a0000 - 0x00000000000bffff size 0x00020000 type 0
[DEBUG]  0x00000000000c0000 - 0x000000007fffffff size 0x7ff40000 type 6
[DEBUG]  0x0000000080000000 - 0x00000000feffffff size 0x7f000000 type 0
[DEBUG]  0x00000000ff000000 - 0x00000000ffffffff size 0x01000000 type 5
[DEBUG]  0x0000000100000000 - 0x000000027b5fffff size 0x17b600000 type 6
[DEBUG]  0x0000000fc0000000 - 0x0000000fffffffff size 0x40000000 type 0
[DEBUG]  MTRR: default type WB/UC MTRR counts: 9/7.
[DEBUG]  MTRR: UC selected as default type.
[DEBUG]  MTRR: 0 base 0x0000000000000000 mask 0x0000000f80000000 type 6
[DEBUG]  MTRR: 1 base 0x00000000ff000000 mask 0x0000000fff000000 type 5
[DEBUG]  MTRR: 2 base 0x0000000100000000 mask 0x0000000f00000000 type 6
[DEBUG]  MTRR: 3 base 0x0000000200000000 mask 0x0000000f80000000 type 6
[DEBUG]  MTRR: 4 base 0x000000027b600000 mask 0x0000000fffe00000 type 0
[DEBUG]  MTRR: 5 base 0x000000027b800000 mask 0x0000000fff800000 type 0
[DEBUG]  MTRR: 6 base 0x000000027c000000 mask 0x0000000ffc000000 type 0
[DEBUG]  CPU_CLUSTER: 0 init finished in 24 msecs
[DEBUG]  PCI: 00:00:00.0 init
[DEBUG]  Disabling PEG12.
[DEBUG]  Disabling PEG11.
[DEBUG]  Disabling PEG10.
[DEBUG]  Disabling Device 4.
[DEBUG]  Disabling PEG60.
[DEBUG]  Disabling Device 7.
[DEBUG]  Disabling PEG IO clock.
[DEBUG]  Set BIOS_RESET_CPL
[DEBUG]  CPU TDP: 35 Watts
[DEBUG]  PCI: 00:00:00.0 init finished in 1 msecs
[DEBUG]  PCI: 00:00:02.0 init
[DEBUG]  Starting cbfs_boot_device
[INFO ]  CBFS: Found 'vbt.bin' @0x3edc0 size 0x5ab in mcache @0x7fffeb14
[INFO ]  Found a VBT of 6144 bytes
[INFO ]  GMA: Found VBT in CBFS
[INFO ]  GMA: Found valid VBT in CBFS
[DEBUG]  GT Power Management Init
[DEBUG]  SNB GT2 Power Meter Weights
[DEBUG]  GT Power Management Init (post VBIOS)
[INFO ]  framebuffer_info: bytes_per_line: 5504, bits_per_pixel: 32
[INFO ]                     x_res x y_res: 1366 x 768, size: 4227072 at 0xe0000000
[DEBUG]  PCI: 00:00:02.0 init finished in 116 msecs
[DEBUG]  PCI: 00:00:14.0 init
[DEBUG]  XHCI: Setting up controller.. done.
[DEBUG]  PCI: 00:00:14.0 init finished in 0 msecs
[DEBUG]  PCI: 00:00:16.0 init
[DEBUG]  ME: FW Partition Table      : OK
[DEBUG]  ME: Bringup Loader Failure  : NO
[DEBUG]  ME: Firmware Init Complete  : NO
[DEBUG]  ME: Manufacturing Mode      : YES
[DEBUG]  ME: Boot Options Present    : NO
[DEBUG]  ME: Update In Progress      : NO
[DEBUG]  ME: Current Working State   : Normal
[DEBUG]  ME: Current Operation State : M0 with UMA
[DEBUG]  ME: Current Operation Mode  : Normal
[DEBUG]  ME: Error Code              : No Error
[DEBUG]  ME: Progress Phase          : Policy Module
[DEBUG]  ME: Power Management Event  : Pseudo-global reset
[DEBUG]  ME: Progress Phase State    : Entry into Policy Module
[NOTE ]  ME: BIOS path: Normal
[DEBUG]  ME: me_state=0, me_state_prev=0
[DEBUG]  ME: Extend SHA-256: 31d62f9651b63bdf7a0febf121c72aeae74b6e67e361889de27118b6f75474b4
[INFO ]  ME: MBP item header 00020103
[INFO ]  ME: MBP item header 00050102
[INFO ]  ME: MBP item header 00020501
[INFO ]  ME: MBP item header 00020201
[INFO ]  ME: MBP item header 02030101
[INFO ]  ME: MBP item header 02060301
[INFO ]  ME: MBP item header 02090401
[DEBUG]  ME: found version 8.0.4.1441
[DEBUG]  ME Capability: Full Network manageability                : disabled
[DEBUG]  ME Capability: Regular Network manageability             : disabled
[DEBUG]  ME Capability: Manageability                             :  enabled
[DEBUG]  ME Capability: Small business technology                 :  enabled
[DEBUG]  ME Capability: Level III manageability                   : disabled
[DEBUG]  ME Capability: IntelR Anti-Theft (AT)                    :  enabled
[DEBUG]  ME Capability: IntelR Capability Licensing Service (CLS) :  enabled
[DEBUG]  ME Capability: IntelR Power Sharing Technology (MPC)     :  enabled
[DEBUG]  ME Capability: ICC Over Clocking                         :  enabled
[DEBUG]  ME Capability: Protected Audio Video Path (PAVP)         :  enabled
[DEBUG]  ME Capability: IPV6                                      : disabled
[DEBUG]  ME Capability: KVM Remote Control (KVM)                  : disabled
[DEBUG]  ME Capability: Outbreak Containment Heuristic (OCH)      : disabled
[DEBUG]  ME Capability: Virtual LAN (VLAN)                        :  enabled
[DEBUG]  ME Capability: TLS                                       :  enabled
[DEBUG]  ME Capability: Wireless LAN (WLAN)                       : disabled
[DEBUG]  PCI: 00:00:16.0 init finished in 61 msecs
[DEBUG]  PCI: 00:00:1a.0 init
[DEBUG]  EHCI: Setting up controller.. done.
[DEBUG]  PCI: 00:00:1a.0 init finished in 0 msecs
[DEBUG]  PCI: 00:00:1b.0 init
[DEBUG]  Azalia: base = 0xdd8ec000
[DEBUG]  Azalia: codec_mask = 09
[DEBUG]  azalia_audio: initializing Conexant CX20588...
[DEBUG]  azalia_audio:  - vendor ID:    0x14f1506c
[DEBUG]  azalia_audio:  - subsystem ID: 0x10250737
[DEBUG]  azalia_audio:  - address:      0
[DEBUG]  azalia_audio: done
[DEBUG]  azalia_audio: initializing Intel PantherPoint HDMI...
[DEBUG]  azalia_audio:  - vendor ID:    0x80862806
[DEBUG]  azalia_audio:  - subsystem ID: 0x80860101
[DEBUG]  azalia_audio:  - address:      3
[DEBUG]  azalia_audio: done
[DEBUG]  PCI: 00:00:1b.0 init finished in 4 msecs
[DEBUG]  PCI: 00:00:1c.0 init
[DEBUG]  Initializing PCH PCIe bridge.
[DEBUG]  PCI: 00:00:1c.0 init finished in 0 msecs
[DEBUG]  PCI: 00:00:1c.1 init
[DEBUG]  Initializing PCH PCIe bridge.
[DEBUG]  PCI: 00:00:1c.1 init finished in 0 msecs
[DEBUG]  PCI: 00:00:1c.2 init
[DEBUG]  Initializing PCH PCIe bridge.
[DEBUG]  PCI: 00:00:1c.2 init finished in 0 msecs
[DEBUG]  PCI: 00:00:1c.3 init
[DEBUG]  Initializing PCH PCIe bridge.
[DEBUG]  PCI: 00:00:1c.3 init finished in 0 msecs
[DEBUG]  PCI: 00:00:1c.5 init
[DEBUG]  Initializing PCH PCIe bridge.
[DEBUG]  PCI: 00:00:1c.5 init finished in 0 msecs
[DEBUG]  PCI: 00:00:1d.0 init
[DEBUG]  EHCI: Setting up controller.. done.
[DEBUG]  PCI: 00:00:1d.0 init finished in 0 msecs
[DEBUG]  PCI: 00:00:1f.0 init
[DEBUG]  pch: lpc_init
[INFO ]  PCH: detected HM77, device id: 0x1e57, rev id 0x4
[DEBUG]  IOAPIC: Initializing IOAPIC at fec00000
[DEBUG]  IOAPIC: ID = 0x00
[DEBUG]  IOAPIC: 24 interrupts
[DEBUG]  IOAPIC: Clearing IOAPIC at fec00000
[DEBUG]  IOAPIC: Bootstrap Processor Local APIC = 0x00
[INFO ]  Set power off after power failure.
[INFO ]  NMI sources disabled.
[DEBUG]  PantherPoint PM init
[DEBUG]  RTC: failed = 0x0
[DEBUG]  RTC Init
[DEBUG]  apm_control: Disabling ACPI.
[DEBUG]  APMC done.
[DEBUG]  pch_spi_init
[DEBUG]  PCI: 00:00:1f.0 init finished in 0 msecs
[DEBUG]  PCI: 00:00:1f.2 init
[DEBUG]  SATA: Initializing...
[DEBUG]  SATA: Controller in AHCI mode.
[DEBUG]  ABAR: 0xdd8eb000
[DEBUG]  PCI: 00:00:1f.2 init finished in 0 msecs
[DEBUG]  PCI: 00:00:1f.3 init
[DEBUG]  PCI: 00:00:1f.3 init finished in 0 msecs
[DEBUG]  PCI: 00:0a:00.0 init
[DEBUG]  PCI: 00:0a:00.0 init finished in 0 msecs
[DEBUG]  PCI: 00:13:00.0 init
[DEBUG]  PCI: 00:13:00.0 init finished in 0 msecs
[DEBUG]  PCI: 00:1c:00.0 init
[DEBUG]  PCI: 00:1c:00.0 init finished in 0 msecs
[INFO ]  Devices initialized
[DEBUG]  BS: BS_DEV_INIT run times (exec / console): 231 / 1 ms
[INFO ]  Finalize devices...
[DEBUG]  PCI: 00:00:1f.0 final
[DEBUG]  apm_control: Finalizing SMM.
[DEBUG]  APMC done.
[INFO ]  Devices finalized
[DEBUG]  BS: BS_POST_DEVICE run times (exec / console): 5 / 0 ms
[DEBUG]  Starting cbfs_boot_device
[INFO ]  CBFS: Found 'fallback/dsdt.aml' @0x3c5c0 size 0x279e in mcache @0x7fffeae8
[DEBUG]  Starting cbfs_boot_device
[WARN ]  CBFS: 'fallback/slic' not found.
[INFO ]  ACPI: Writing ACPI tables at 7fe2e000.
[DEBUG]  ACPI:    * FACS
[DEBUG]  ACPI:    * FACP
[DEBUG]  ACPI: added table 1/32, length now 44
[DEBUG]  Found 1 CPU(s) with 4 core(s) each.
[DEBUG]  Supported C-states:  C0 C1 C1E C3 C6 C7 C7S
[DEBUG]  PSS: 2400MHz power 35000 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 27813 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 21235 control 0x1000 status 0x1000
[DEBUG]  PSS: 1200MHz power 15190 control 0xc00 status 0xc00
[DEBUG]  PSS: 800MHz power 9627 control 0x800 status 0x800
[DEBUG]  Advertising ACPI C State type C1 as CPU C1
[DEBUG]  Advertising ACPI C State type C2 as CPU C3
[DEBUG]  Advertising ACPI C State type C3 as CPU C7
[DEBUG]  PSS: 2400MHz power 35000 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 27813 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 21235 control 0x1000 status 0x1000
[DEBUG]  PSS: 1200MHz power 15190 control 0xc00 status 0xc00
[DEBUG]  PSS: 800MHz power 9627 control 0x800 status 0x800
[DEBUG]  Advertising ACPI C State type C1 as CPU C1
[DEBUG]  Advertising ACPI C State type C2 as CPU C3
[DEBUG]  Advertising ACPI C State type C3 as CPU C7
[DEBUG]  PSS: 2400MHz power 35000 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 27813 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 21235 control 0x1000 status 0x1000
[DEBUG]  PSS: 1200MHz power 15190 control 0xc00 status 0xc00
[DEBUG]  PSS: 800MHz power 9627 control 0x800 status 0x800
[DEBUG]  Advertising ACPI C State type C1 as CPU C1
[DEBUG]  Advertising ACPI C State type C2 as CPU C3
[DEBUG]  Advertising ACPI C State type C3 as CPU C7
[DEBUG]  PSS: 2400MHz power 35000 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 27813 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 21235 control 0x1000 status 0x1000
[DEBUG]  PSS: 1200MHz power 15190 control 0xc00 status 0xc00
[DEBUG]  PSS: 800MHz power 9627 control 0x800 status 0x800
[DEBUG]  Advertising ACPI C State type C1 as CPU C1
[DEBUG]  Advertising ACPI C State type C2 as CPU C3
[DEBUG]  Advertising ACPI C State type C3 as CPU C7
[DEBUG]  PCI space above 4GB MMIO is at 0x27b600000, len = 0xd84a00000
[DEBUG]  Generating ACPI PIRQ entries
[DEBUG]  ACPI:    * SSDT
[DEBUG]  ACPI: added table 2/32, length now 52
[DEBUG]  ACPI:    * MCFG
[DEBUG]  ACPI: added table 3/32, length now 60
[DEBUG]  IOAPIC: 24 interrupts
[DEBUG]  ACPI:    * APIC
[DEBUG]  ACPI: added table 4/32, length now 68
[DEBUG]  current = 7fe321b0
[DEBUG]  ACPI:    * HPET
[DEBUG]  ACPI: added table 5/32, length now 76
[INFO ]  ACPI: done.
[DEBUG]  ACPI tables: 16880 bytes.
[DEBUG]  smbios_write_tables: 7fe26000
[DEBUG]  SMBIOS firmware version is set to coreboot_version: '25.12-669-gc940d20696b4-dirty'
[INFO ]  Create SMBIOS type 16
[INFO ]  Create SMBIOS type 17
[INFO ]  Create SMBIOS type 20
[DEBUG]  SMBIOS tables: 1091 bytes.
[DEBUG]  Writing table forward entry at 0x00000500
[DEBUG]  Wrote coreboot table at: 0x00000500, 0x10 bytes, checksum 5ff9
[DEBUG]  Writing coreboot table at 0x7fe52000
[DEBUG]  CFR: Written 2168 bytes of CFR structures at 0x7fe52018, with CRC32 0x6c731bf7
[DEBUG]   0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
[DEBUG]   1. 0000000000001000-000000000009ffff: RAM
[DEBUG]   2. 00000000000a0000-00000000000f5fff: RESERVED
[DEBUG]   3. 00000000000f6000-00000000000f6fff: CONFIGURATION TABLES
[DEBUG]   4. 00000000000f7000-00000000000fffff: RESERVED
[DEBUG]   5. 0000000000100000-000000001fffffff: RAM
[DEBUG]   6. 0000000020000000-00000000201fffff: RESERVED
[DEBUG]   7. 0000000020200000-000000003fffffff: RAM
[DEBUG]   8. 0000000040000000-00000000401fffff: RESERVED
[DEBUG]   9. 0000000040200000-000000007fe25fff: RAM
[DEBUG]  10. 000000007fe26000-000000007fe7efff: CONFIGURATION TABLES
[DEBUG]  11. 000000007fe7f000-000000007ffc9fff: RAMSTAGE
[DEBUG]  12. 000000007ffca000-000000007fffffff: CONFIGURATION TABLES
[DEBUG]  13. 0000000080000000-00000000829fffff: RESERVED
[DEBUG]  14. 00000000f0000000-00000000f3ffffff: RESERVED
[DEBUG]  15. 00000000fec00000-00000000fec00fff: RESERVED
[DEBUG]  16. 00000000fed00000-00000000fed00fff: RESERVED
[DEBUG]  17. 00000000fed10000-00000000fed19fff: RESERVED
[DEBUG]  18. 00000000fed1c000-00000000fed3ffff: RESERVED
[DEBUG]  19. 00000000fed45000-00000000fed8ffff: RESERVED
[DEBUG]  20. 00000000ff000000-00000000ffffffff: RESERVED
[DEBUG]  21. 0000000100000000-000000027b5fffff: RAM
[DEBUG]  FMAP: area SMMSTORE found @ 910000 (524288 bytes)
[DEBUG]  smm store: 8 # blocks with size 0x10000
[DEBUG]  Starting cbfs_boot_device
[DEBUG]  Wrote coreboot table at: 0x7fe52000, 0xd44 bytes, checksum a86d
[DEBUG]  coreboot table: 3420 bytes.
[DEBUG]  IMD ROOT    0. 0x7ffff000 0x00001000
[DEBUG]  IMD SMALL   1. 0x7fffe000 0x00001000
[DEBUG]  CONSOLE     2. 0x7ffde000 0x00020000
[DEBUG]  TIME STAMP  3. 0x7ffdd000 0x00000910
[DEBUG]  MEM INFO    4. 0x7ffdb000 0x000010c8
[DEBUG]  AFTER CAR   5. 0x7ffca000 0x00011000
[DEBUG]  RAMSTAGE    6. 0x7fe7e000 0x0014c000
[DEBUG]  SMM BACKUP  7. 0x7fe6e000 0x00010000
[DEBUG]  SMM COMBUFFER 8. 0x7fe5e000 0x00010000
[DEBUG]  IGD OPREGION 9. 0x7fe5a000 0x00003200
[DEBUG]  COREBOOT   10. 0x7fe52000 0x00008000
[DEBUG]  ACPI       11. 0x7fe2e000 0x00024000
[DEBUG]  SMBIOS     12. 0x7fe26000 0x00008000
[DEBUG]  IMD small region:
[DEBUG]    IMD ROOT    0. 0x7fffec00 0x00000400
[DEBUG]    RO MCACHE   1. 0x7fffe960 0x00000298
[DEBUG]    FMAP        2. 0x7fffe840 0x0000010a
[DEBUG]    ROMSTAGE    3. 0x7fffe820 0x00000004
[DEBUG]    ROMSTG STCK 4. 0x7fffe760 0x000000a8
[DEBUG]    ACPI GNVS   5. 0x7fffe660 0x00000100
[DEBUG]  BS: BS_WRITE_TABLES run times (exec / console): 3 / 0 ms
[DEBUG]  Starting cbfs_boot_device
[INFO ]  CBFS: Found 'fallback/payload' @0x49140 size 0x1e7059 in mcache @0x7fffeb88
[DEBUG]  Checking segment from ROM address 0xffdda16c
[DEBUG]  Checking segment from ROM address 0xffdda188
[DEBUG]  Loading segment from ROM address 0xffdda16c
[DEBUG]    code (compression=1)
[DEBUG]    New segment dstaddr 0x00800000 memsize 0x800000 srcaddr 0xffdda1a4 filesize 0x1e7021
[DEBUG]  Loading Segment: addr: 0x00800000 memsz: 0x0000000000800000 filesz: 0x00000000001e7021
[DEBUG]  using LZMA
[DEBUG]  Loading segment from ROM address 0xffdda188
[DEBUG]    Entry Point 0x008022a7
[DEBUG]  BS: BS_PAYLOAD_LOAD run times (exec / console): 1105 / 0 ms
[DEBUG]  ICH-NM10-PCH: watchdog disabled
[DEBUG]  Jumping to boot code at 0x008022a7(0x7fe52000)
