[    0.000000] Linux version 5.18.0-1-amd64 (debian-kernel@lists.debian.org) (gcc-11 (Debian 11.3.0-3) 11.3.0, GNU ld (GNU Binutils for Debian) 2.38) #1 SMP PREEMPT_DYNAMIC Debian 5.18.2-1 (2022-06-06)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.18.0-1-amd64 root=/dev/mapper/TP--230t--vg-root ro iomem=relaxed
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007eda2fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007eda3000-0x000000007ef0afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007ef0b000-0x000000007ff0ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ff10000-0x000000008e9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004715fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: LENOVO 20OJKGY/20OJKGY, BIOS CBET4000 CoreBoot 4.17 X230 Tablet 06/18/2022
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2294.726 MHz processor
[    0.001102] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001106] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001112] last_pfn = 0x471600 max_arch_pfn = 0x400000000
[    0.001210] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002164] last_pfn = 0x7ff10 max_arch_pfn = 0x400000000
[    0.014920] RAMDISK: [mem 0x2ecf7000-0x33672fff]
[    0.014926] ACPI: Early table checksum verification disabled
[    0.014929] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4)
[    0.014935] ACPI: XSDT 0x000000007FF3B0E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20220331)
[    0.014942] ACPI: FACP 0x000000007FF3EBA0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20220331)
[    0.014949] ACPI: DSDT 0x000000007FF3B280 00391E (v02 COREv4 COREBOOT 20110725 INTL 20220331)
[    0.014953] ACPI: FACS 0x000000007FF3B240 000040
[    0.014957] ACPI: FACS 0x000000007FF3B240 000040
[    0.014960] ACPI: SSDT 0x000000007FF3ECC0 002DDA (v02 COREv4 COREBOOT 0000002A CORE 20220331)
[    0.014965] ACPI: MCFG 0x000000007FF41AA0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20220331)
[    0.014969] ACPI: TCPA 0x000000007FF41AE0 000032 (v02 COREv4 COREBOOT 00000000 CORE 20220331)
[    0.014973] ACPI: APIC 0x000000007FF41B20 00008C (v03 COREv4 COREBOOT 00000000 CORE 20220331)
[    0.014977] ACPI: DMAR 0x000000007FF41BB0 0000C0 (v01 COREv4 COREBOOT 00000000 CORE 20220331)
[    0.014981] ACPI: HPET 0x000000007FF41C70 000038 (v01 COREv4 COREBOOT 00000000 CORE 20220331)
[    0.014985] ACPI: Reserving FACP table memory at [mem 0x7ff3eba0-0x7ff3ecb3]
[    0.014987] ACPI: Reserving DSDT table memory at [mem 0x7ff3b280-0x7ff3eb9d]
[    0.014989] ACPI: Reserving FACS table memory at [mem 0x7ff3b240-0x7ff3b27f]
[    0.014991] ACPI: Reserving FACS table memory at [mem 0x7ff3b240-0x7ff3b27f]
[    0.014992] ACPI: Reserving SSDT table memory at [mem 0x7ff3ecc0-0x7ff41a99]
[    0.014994] ACPI: Reserving MCFG table memory at [mem 0x7ff41aa0-0x7ff41adb]
[    0.014995] ACPI: Reserving TCPA table memory at [mem 0x7ff41ae0-0x7ff41b11]
[    0.014997] ACPI: Reserving APIC table memory at [mem 0x7ff41b20-0x7ff41bab]
[    0.014998] ACPI: Reserving DMAR table memory at [mem 0x7ff41bb0-0x7ff41c6f]
[    0.015000] ACPI: Reserving HPET table memory at [mem 0x7ff41c70-0x7ff41ca7]
[    0.015062] No NUMA configuration found
[    0.015064] Faking a node at [mem 0x0000000000000000-0x00000004715fffff]
[    0.015077] NODE_DATA(0) allocated [mem 0x4715cb000-0x4715f5fff]
[    0.015583] Zone ranges:
[    0.015585]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.015588]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.015590]   Normal   [mem 0x0000000100000000-0x00000004715fffff]
[    0.015592]   Device   empty
[    0.015594] Movable zone start for each node
[    0.015598] Early memory node ranges
[    0.015599]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.015601]   node   0: [mem 0x0000000000100000-0x000000007eda2fff]
[    0.015603]   node   0: [mem 0x000000007ef0b000-0x000000007ff0ffff]
[    0.015605]   node   0: [mem 0x0000000100000000-0x00000004715fffff]
[    0.015608] Initmem setup node 0 [mem 0x0000000000001000-0x00000004715fffff]
[    0.015615] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.015662] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.021608] On node 0, zone DMA32: 360 pages in unavailable ranges
[    0.022010] On node 0, zone Normal: 240 pages in unavailable ranges
[    0.022322] On node 0, zone Normal: 27136 pages in unavailable ranges
[    0.022330] Reserving Intel graphics memory at [mem 0x80a00000-0x8e9fffff]
[    0.022534] ACPI: PM-Timer IO Port: 0x508
[    0.022552] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.022556] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.022559] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.022564] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.022566] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.022571] TSC deadline timer available
[    0.022573] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.022587] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.022590] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.022592] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.022593] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.022595] PM: hibernation: Registered nosave memory: [mem 0x7eda3000-0x7ef0afff]
[    0.022598] PM: hibernation: Registered nosave memory: [mem 0x7ff10000-0x8e9fffff]
[    0.022599] PM: hibernation: Registered nosave memory: [mem 0x8ea00000-0xefffffff]
[    0.022601] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.022602] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
[    0.022603] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.022605] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[    0.022606] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[    0.022608] PM: hibernation: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[    0.022610] [mem 0x8ea00000-0xefffffff] available for PCI devices
[    0.022612] Booting paravirtualized kernel on bare hardware
[    0.022615] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.027555] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.027798] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144
[    0.027807] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152
[    0.027810] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.027841] Fallback order for Node 0: 0 
[    0.027846] Built 1 zonelists, mobility grouping on.  Total pages: 4068953
[    0.027848] Policy zone: Normal
[    0.027850] Kernel command line: BOOT_IMAGE=/vmlinuz-5.18.0-1-amd64 root=/dev/mapper/TP--230t--vg-root ro iomem=relaxed
[    0.027893] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-5.18.0-1-amd64", will be passed to user space.
[    0.028856] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.029332] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.029446] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.054894] Memory: 2044792K/16534808K available (12294K kernel code, 2773K rwdata, 8560K rodata, 2500K init, 5156K bss, 468060K reserved, 0K cma-reserved)
[    0.055273] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.055293] Kernel/User page tables isolation: enabled
[    0.055313] ftrace: allocating 38624 entries in 151 pages
[    0.063212] ftrace: allocated 151 pages with 5 groups
[    0.063882] Dynamic Preempt: voluntary
[    0.063935] rcu: Preemptible hierarchical RCU implementation.
[    0.063937] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.063939] 	Trampoline variant of Tasks RCU enabled.
[    0.063940] 	Rude variant of Tasks RCU enabled.
[    0.063941] 	Tracing variant of Tasks RCU enabled.
[    0.063942] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.063943] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.069020] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.069249] random: crng init done
[    0.069274] spurious 8259A interrupt: IRQ7.
[    0.070912] Console: colour VGA+ 80x25
[    0.078598] printk: console [tty0] enabled
[    0.078675] ACPI: Core revision 20211217
[    0.078817] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.078911] APIC: Switch to symmetric I/O mode setup
[    0.078971] DMAR: Host address width 36
[    0.079028] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.079095] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.079171] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.079236] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.079312] DMAR: RMRR base: 0x00000080800000 end: 0x0000008e9fffff
[    0.079377] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.079439] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.079498] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.080119] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.080182] x2apic enabled
[    0.080244] Switched APIC routing to cluster x2apic.
[    0.080754] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.098912] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2113befebee, max_idle_ns: 440795296110 ns
[    0.098998] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.45 BogoMIPS (lpj=9178904)
[    0.099078] pid_max: default: 32768 minimum: 301
[    0.099168] LSM: Security Framework initializing
[    0.099238] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.099329] AppArmor: AppArmor initialized
[    0.099389] TOMOYO Linux initialized
[    0.099496] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.099602] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.099932] CPU0: Thermal monitoring enabled (TM1)
[    0.100019] process: using mwait in idle threads
[    0.100081] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.100144] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.100210] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.100286] Spectre V2 : Mitigation: Retpolines
[    0.100345] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.100418] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.100483] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.100982] Spectre V2 : User space: Mitigation: STIBP via prctl
[    0.101045] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.101122] SRBDS: Vulnerable: No microcode
[    0.101181] MDS: Mitigation: Clear CPU buffers
[    0.103997] Freeing SMP alternatives memory: 32K
[    0.104227] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1380
[    0.104312] smpboot: CPU0: Intel(R) Core(TM) i7-3615QE CPU @ 2.30GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.104561] cblist_init_generic: Setting adjustable number of callback queues.
[    0.104636] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.104722] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.104802] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.104883] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.104979] ... version:                3
[    0.105037] ... bit width:              48
[    0.105095] ... generic registers:      4
[    0.105153] ... value mask:             0000ffffffffffff
[    0.105213] ... max period:             00007fffffffffff
[    0.105275] ... fixed-purpose events:   3
[    0.105334] ... event mask:             000000070000000f
[    0.105551] rcu: Hierarchical SRCU implementation.
[    0.106501] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.106669] smp: Bringing up secondary CPUs ...
[    0.106845] x86: Booting SMP configuration:
[    0.106906] .... node  #0, CPUs:      #1
[    0.109880] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.109880]  #2 #3 #4 #5 #6 #7
[    0.130342] smp: Brought up 1 node, 8 CPUs
[    0.130342] smpboot: Max logical packages: 1
[    0.130342] smpboot: Total of 8 processors activated (36715.61 BogoMIPS)
[    0.153786] node 0 deferred pages initialised in 20ms
[    0.153791] devtmpfs: initialized
[    0.153791] x86/mm: Memory block size: 128MB
[    0.156275] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.156275] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.156275] pinctrl core: initialized pinctrl subsystem
[    0.156275] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.156275] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.156325] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.156559] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.156649] audit: initializing netlink subsys (disabled)
[    0.156725] audit: type=2000 audit(1655566510.076:1): state=initialized audit_enabled=0 res=1
[    0.156725] thermal_sys: Registered thermal governor 'fair_share'
[    0.156725] thermal_sys: Registered thermal governor 'bang_bang'
[    0.156725] thermal_sys: Registered thermal governor 'step_wise'
[    0.156725] thermal_sys: Registered thermal governor 'user_space'
[    0.156725] thermal_sys: Registered thermal governor 'power_allocator'
[    0.156725] cpuidle: using governor ladder
[    0.156725] cpuidle: using governor menu
[    0.156725] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.156725] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.156725] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.156725] PCI: Using configuration type 1 for base access
[    0.159028] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.159978] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.160062] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.160062] ACPI: Added _OSI(Module Device)
[    0.160062] ACPI: Added _OSI(Processor Device)
[    0.160062] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.160062] ACPI: Added _OSI(Processor Aggregator Device)
[    0.160062] ACPI: Added _OSI(Linux-Dell-Video)
[    0.160062] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.160062] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.164446] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.165520] ACPI: EC: EC started
[    0.165579] ACPI: EC: interrupt blocked
[    0.166090] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.166152] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[    0.166227] ACPI: Interpreter enabled
[    0.166303] ACPI: PM: (supports S0 S3 S4 S5)
[    0.166362] ACPI: Using IOAPIC for interrupt routing
[    0.166439] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.166670] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.171515] ACPI: PM: Power Resource [FPWR]
[    0.171903] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.171970] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.172083] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.172168] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.172330] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
[    0.172415] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d05ff])
[    0.172684] PCI host bridge to bus 0000:00
[    0.172744] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.172809] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.172872] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000cbfff window]
[    0.172948] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000fffff window]
[    0.173022] pci_bus 0000:00: root bus resource [mem 0x8ea00000-0xefffffff window]
[    0.173096] pci_bus 0000:00: root bus resource [mem 0x471600001-0xfffffffff window]
[    0.173170] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.173245] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.173319] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.173476] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.173549] pci 0000:00:02.0: reg 0x10: [mem 0x8ec00000-0x8effffff 64bit]
[    0.173618] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[    0.173694] pci 0000:00:02.0: reg 0x20: [io  0x1000-0x103f]
[    0.173769] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.173920] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[    0.173991] pci 0000:00:04.0: reg 0x10: [mem 0x8f030000-0x8f037fff 64bit]
[    0.174146] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.174226] pci 0000:00:14.0: reg 0x10: [mem 0x8f020000-0x8f02ffff 64bit]
[    0.174355] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.174501] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.174578] pci 0000:00:19.0: reg 0x10: [mem 0x8f000000-0x8f01ffff]
[    0.174648] pci 0000:00:19.0: reg 0x14: [mem 0x8f03c000-0x8f03cfff]
[    0.174716] pci 0000:00:19.0: reg 0x18: [io  0x1040-0x105f]
[    0.174839] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.174961] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.175013] pci 0000:00:1a.0: reg 0x10: [mem 0x8f03f000-0x8f03f3ff]
[    0.175165] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.175313] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.175391] pci 0000:00:1b.0: reg 0x10: [mem 0x8f038000-0x8f03bfff 64bit]
[    0.175536] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.175692] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.175901] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.176000] pci 0000:00:1c.0: Enabling MPC IRBNCE
[    0.176060] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[    0.176212] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.176423] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.176519] pci 0000:00:1c.1: Enabling MPC IRBNCE
[    0.176582] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
[    0.176737] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.176940] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.177036] pci 0000:00:1c.2: Enabling MPC IRBNCE
[    0.177098] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
[    0.177257] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.177335] pci 0000:00:1d.0: reg 0x10: [mem 0x8f040000-0x8f0403ff]
[    0.177485] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.177634] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[    0.177879] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.177952] pci 0000:00:1f.2: reg 0x10: [io  0x1080-0x1087]
[    0.178020] pci 0000:00:1f.2: reg 0x14: [io  0x1090-0x1093]
[    0.178087] pci 0000:00:1f.2: reg 0x18: [io  0x1088-0x108f]
[    0.178154] pci 0000:00:1f.2: reg 0x1c: [io  0x1094-0x1097]
[    0.178221] pci 0000:00:1f.2: reg 0x20: [io  0x1060-0x107f]
[    0.178288] pci 0000:00:1f.2: reg 0x24: [mem 0x8f03e000-0x8f03e7ff]
[    0.178392] pci 0000:00:1f.2: PME# supported from D3hot
[    0.178529] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.178607] pci 0000:00:1f.3: reg 0x10: [mem 0x8f041000-0x8f0410ff 64bit]
[    0.178690] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.178834] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[    0.178917] pci 0000:00:1f.6: reg 0x10: [mem 0x8f03d000-0x8f03dfff 64bit]
[    0.179215] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[    0.179288] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
[    0.179402] pci 0000:01:00.0: reg 0x10: [mem 0x8ea00000-0x8ea000ff]
[    0.179790] pci 0000:01:00.0: supports D1 D2
[    0.179850] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.180161] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.180229] pci 0000:00:1c.0:   bridge window [mem 0x8ea00000-0x8eafffff]
[    0.180473] pci 0000:02:00.0: [8086:2723] type 00 class 0x028000
[    0.180638] pci 0000:02:00.0: reg 0x10: [mem 0x8eb00000-0x8eb03fff 64bit]
[    0.181228] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.181689] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.181756] pci 0000:00:1c.1:   bridge window [mem 0x8eb00000-0x8ebfffff]
[    0.181906] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.182170] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[    0.183046] ACPI: PCI: Interrupt link LNKB configured for IRQ 11
[    0.183151] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.183255] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.183358] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[    0.183462] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[    0.183566] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.183669] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.184694] ACPI: EC: interrupt unblocked
[    0.184754] ACPI: EC: event unblocked
[    0.184815] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.184874] ACPI: EC: GPE=0x11
[    0.184933] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC initialization complete
[    0.184998] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
[    0.185144] iommu: Default domain type: Translated 
[    0.185144] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.185144] EDAC MC: Ver: 3.0.0
[    0.185144] NetLabel: Initializing
[    0.185144] NetLabel:  domain hash size = 128
[    0.185144] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.185144] NetLabel:  unlabeled traffic allowed by default
[    0.185144] PCI: Using ACPI for IRQ routing
[    0.187647] PCI: pci_cache_line_size set to 64 bytes
[    0.187725] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.187728] e820: reserve RAM buffer [mem 0x7eda3000-0x7fffffff]
[    0.187729] e820: reserve RAM buffer [mem 0x7ff10000-0x7fffffff]
[    0.187731] e820: reserve RAM buffer [mem 0x471600000-0x473ffffff]
[    0.187747] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.187747] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.187747] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.187747] vgaarb: loaded
[    0.188274] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.188345] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.191050] clocksource: Switched to clocksource tsc-early
[    0.199156] VFS: Disk quotas dquot_6.6.0
[    0.199234] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.199431] AppArmor: AppArmor Filesystem Enabled
[    0.199511] pnp: PnP ACPI init
[    0.199760] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.199828] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.199891] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.199955] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.200019] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.200083] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.200146] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.200211] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.200272] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[    0.200337] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[    0.200874] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.200982] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.201047] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.201228] pnp: PnP ACPI: found 7 devices
[    0.207212] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.207354] NET: Registered PF_INET protocol family
[    0.207583] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.210177] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.210361] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.210682] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.210845] TCP: Hash tables configured (established 131072 bind 65536)
[    0.210995] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.211178] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.211292] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.211436] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.211504] NET: Registered PF_XDP protocol family
[    0.211572] pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.211652] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.211734] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[    0.211820] pci 0000:00:1c.2: BAR 14: assigned [mem 0x8f100000-0x8f2fffff]
[    0.211888] pci 0000:00:1c.2: BAR 15: assigned [mem 0x471700000-0x4718fffff 64bit pref]
[    0.211966] pci 0000:00:1c.2: BAR 13: assigned [io  0x2000-0x2fff]
[    0.212032] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.212098] pci 0000:00:1c.0:   bridge window [mem 0x8ea00000-0x8eafffff]
[    0.212173] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.212238] pci 0000:00:1c.1:   bridge window [mem 0x8eb00000-0x8ebfffff]
[    0.212311] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.212375] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.212441] pci 0000:00:1c.2:   bridge window [mem 0x8f100000-0x8f2fffff]
[    0.212507] pci 0000:00:1c.2:   bridge window [mem 0x471700000-0x4718fffff 64bit pref]
[    0.212590] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.212653] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.212717] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000cbfff window]
[    0.212779] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000fffff window]
[    0.212842] pci_bus 0000:00: resource 8 [mem 0x8ea00000-0xefffffff window]
[    0.212905] pci_bus 0000:00: resource 9 [mem 0x471600001-0xfffffffff window]
[    0.212970] pci_bus 0000:00: resource 10 [mem 0xfed40000-0xfed44fff window]
[    0.213035] pci_bus 0000:01: resource 1 [mem 0x8ea00000-0x8eafffff]
[    0.213097] pci_bus 0000:02: resource 1 [mem 0x8eb00000-0x8ebfffff]
[    0.213160] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.213221] pci_bus 0000:03: resource 1 [mem 0x8f100000-0x8f2fffff]
[    0.213284] pci_bus 0000:03: resource 2 [mem 0x471700000-0x4718fffff 64bit pref]
[    0.214089] PCI: CLS 64 bytes, default 64
[    0.214166] DMAR: No ATSR found
[    0.214222] Trying to unpack rootfs image as initramfs...
[    0.214225] DMAR: No SATC found
[    0.214227] DMAR: IOMMU feature pgsel_inv inconsistent
[    0.214345] DMAR: IOMMU feature pass_through inconsistent
[    0.214407] DMAR: dmar0: Using Queued invalidation
[    0.214534] DMAR: dmar1: Using Queued invalidation
[    0.298480] pci 0000:00:00.0: Adding to iommu group 0
[    0.298560] pci 0000:00:02.0: Adding to iommu group 1
[    0.298632] pci 0000:00:04.0: Adding to iommu group 2
[    0.298701] pci 0000:00:14.0: Adding to iommu group 3
[    0.298772] pci 0000:00:19.0: Adding to iommu group 4
[    0.298843] pci 0000:00:1a.0: Adding to iommu group 5
[    0.298916] pci 0000:00:1b.0: Adding to iommu group 6
[    0.298986] pci 0000:00:1c.0: Adding to iommu group 7
[    0.299064] pci 0000:00:1c.1: Adding to iommu group 8
[    0.299135] pci 0000:00:1c.2: Adding to iommu group 9
[    0.299209] pci 0000:00:1d.0: Adding to iommu group 10
[    0.299291] pci 0000:00:1f.0: Adding to iommu group 11
[    0.299362] pci 0000:00:1f.2: Adding to iommu group 11
[    0.299434] pci 0000:00:1f.3: Adding to iommu group 11
[    0.299504] pci 0000:00:1f.6: Adding to iommu group 11
[    0.299578] pci 0000:01:00.0: Adding to iommu group 12
[    0.299650] pci 0000:02:00.0: Adding to iommu group 13
[    0.300968] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    0.301036] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.301100] software IO TLB: mapped [mem 0x000000007ada3000-0x000000007eda3000] (64MB)
[    0.301663] Initialise system trusted keyrings
[    0.301738] Key type blacklist registered
[    0.301878] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    0.303439] zbud: loaded
[    0.303716] integrity: Platform Keyring initialized
[    0.303779] Key type asymmetric registered
[    0.303840] Asymmetric key parser 'x509' registered
[    0.884203] Freeing initrd memory: 75248K
[    0.890059] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[    0.890151] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.890267] io scheduler mq-deadline registered
[    0.891335] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26
[    0.891643] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27
[    0.891790] pcieport 0000:00:1c.2: enabling device (0104 -> 0107)
[    0.892012] pcieport 0000:00:1c.2: PME: Signaling with IRQ 28
[    0.892108] pcieport 0000:00:1c.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[    0.892362] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.896330] thermal LNXTHERM:00: registered as thermal_zone0
[    0.896397] ACPI: thermal: Thermal Zone [THM0] (67 C)
[    0.897328] thermal LNXTHERM:01: registered as thermal_zone1
[    0.897392] ACPI: thermal: Thermal Zone [THM1] (27 C)
[    0.897616] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.898319] Linux agpgart interface v0.103
[    0.903039] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[    0.959410] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    0.960491] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.963926] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.963993] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.964247] mousedev: PS/2 mouse device common for all mice
[    0.964347] rtc_cmos 00:03: RTC can wake from S4
[    0.964739] rtc_cmos 00:03: registered as rtc0
[    0.964838] rtc_cmos 00:03: setting system clock to 2022-06-18T15:35:11 UTC (1655566511)
[    0.964936] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.965222] intel_pstate: Intel P-state driver initializing
[    0.966004] ledtrig-cpu: registered to indicate activity on CPUs
[    0.966757] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.975151] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.989510] NET: Registered PF_INET6 protocol family
[    0.995383] Segment Routing with IPv6
[    0.995474] In-situ OAM (IOAM) with IPv6
[    0.995549] mip6: Mobile IPv6
[    0.995605] NET: Registered PF_PACKET protocol family
[    0.995866] mpls_gso: MPLS GSO support
[    0.997107] microcode: sig=0x306a9, pf=0x10, revision=0x21
[    0.998445] microcode: Microcode Update Driver: v2.2.
[    0.998450] IPI shorthand broadcast: enabled
[    0.998573] sched_clock: Marking stable (987212296, 9764993)->(1003134420, -6157131)
[    0.998935] registered taskstats version 1
[    0.999002] Loading compiled-in X.509 certificates
[    1.070629] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    1.070717] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[    1.071342] zswap: loaded using pool lzo/zbud
[    1.071829] Key type ._fscrypt registered
[    1.071903] Key type .fscrypt registered
[    1.071958] Key type fscrypt-provisioning registered
[    1.076039] Key type encrypted registered
[    1.076102] AppArmor: AppArmor sha1 policy hashing enabled
[    1.076171] ima: Allocated hash algorithm: sha256
[    1.178171] ima: No architecture policies found
[    1.178254] evm: Initialising EVM extended attributes:
[    1.178324] evm: security.selinux
[    1.178382] evm: security.SMACK64 (disabled)
[    1.178439] evm: security.SMACK64EXEC (disabled)
[    1.178497] evm: security.SMACK64TRANSMUTE (disabled)
[    1.178556] evm: security.SMACK64MMAP (disabled)
[    1.178613] evm: security.apparmor
[    1.178669] evm: security.ima
[    1.178725] evm: security.capability
[    1.178782] evm: HMAC attrs: 0x1
[    1.296767] Freeing unused decrypted memory: 2036K
[    1.297726] Freeing unused kernel image (initmem) memory: 2500K
[    1.307111] Write protecting the kernel read-only data: 24576k
[    1.308368] Freeing unused kernel image (text/rodata gap) memory: 2040K
[    1.309107] Freeing unused kernel image (rodata/data gap) memory: 1680K
[    1.399092] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.399157] x86/mm: Checking user space page tables
[    1.399228] tsc: Refined TSC clocksource calibration: 2294.787 MHz
[    1.399296] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113f8b171d, max_idle_ns: 440795241185 ns
[    1.456066] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.456134] clocksource: Switched to clocksource tsc
[    1.456139] Run /init as init process
[    1.456273]   with arguments:
[    1.456275]     /init
[    1.456275]   with environment:
[    1.456276]     HOME=/
[    1.456277]     TERM=linux
[    1.456277]     BOOT_IMAGE=/vmlinuz-5.18.0-1-amd64
[    1.576429] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input3
[    1.587545] pps_core: LinuxPPS API ver. 1 registered
[    1.587637] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.589841] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20211217/utaddress-204)
[    1.589945] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    1.590033] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20211217/utaddress-204)
[    1.590129] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    1.590192] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20211217/utaddress-204)
[    1.590288] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    1.590349] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20211217/utaddress-204)
[    1.590445] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    1.590506] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    1.591054] ACPI: button: Sleep Button [SLPB]
[    1.591228] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input4
[    1.591397] ACPI: button: Lid Switch [LID]
[    1.591523] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    1.591943] ACPI: button: Power Button [PWRF]
[    1.600276] cryptd: max_cpu_qlen set to 1000
[    1.606035] ACPI: bus type USB registered
[    1.606704] usbcore: registered new interface driver usbfs
[    1.606850] usbcore: registered new interface driver hub
[    1.606970] usbcore: registered new device driver usb
[    1.608696] ACPI: battery: Slot [BAT0] (battery present)
[    1.608926] ACPI: battery: Slot [BAT1] (battery absent)
[    1.611740] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.612022] i2c i2c-0: 2/2 memory slots populated (from DMI)
[    1.612465] AVX version of gcm_enc/dec engaged.
[    1.612556] AES CTR mode by8 optimization enabled
[    1.613656] sdhci: Secure Digital Host Controller Interface driver
[    1.613719] sdhci: Copyright(c) Pierre Ossman
[    1.615111] i2c i2c-0: Successfully instantiated SPD at 0x50
[    1.615996] i2c i2c-0: Successfully instantiated SPD at 0x51
[    1.622507] PTP clock support registered
[    1.622827] ACPI: bus type drm_connector registered
[    1.633903] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.634310] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
[    1.635566] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[    1.636934] ehci-pci: EHCI PCI platform driver
[    1.638452] SCSI subsystem initialized
[    1.638494] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[    1.638727] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.638944] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.639060] ehci-pci 0000:00:1a.0: debug port 2
[    1.640671] e1000e: Intel(R) PRO/1000 Network Driver
[    1.640771] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.641029] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.643072] ehci-pci 0000:00:1a.0: irq 19, io mem 0x8f03f000
[    1.657439] libata version 3.00 loaded.
[    1.659019] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.659161] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[    1.659237] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.659310] usb usb1: Product: EHCI Host Controller
[    1.659372] usb usb1: Manufacturer: Linux 5.18.0-1-amd64 ehci_hcd
[    1.659434] usb usb1: SerialNumber: 0000:00:1a.0
[    1.660347] hub 1-0:1.0: USB hub found
[    1.660422] hub 1-0:1.0: 3 ports detected
[    1.660675] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.660791] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.661991] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
[    1.663315] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[    1.663403] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.663480] usb usb2: Product: xHCI Host Controller
[    1.663542] usb usb2: Manufacturer: Linux 5.18.0-1-amd64 xhci-hcd
[    1.663607] usb usb2: SerialNumber: 0000:00:14.0
[    1.663851] hub 2-0:1.0: USB hub found
[    1.663931] hub 2-0:1.0: 4 ports detected
[    1.664199] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.664236] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.664285] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    1.664347] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.664435] ehci-pci 0000:00:1d.0: debug port 2
[    1.664495] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.664722] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
[    1.664847] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.664920] ahci 0000:00:1f.2: version 3.0
[    1.664969] usb usb4: Product: xHCI Host Controller
[    1.665059] usb usb4: Manufacturer: Linux 5.18.0-1-amd64 xhci-hcd
[    1.665137] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.665163] usb usb4: SerialNumber: 0000:00:14.0
[    1.665308] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[    1.665478] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    1.665489] hub 4-0:1.0: USB hub found
[    1.665713] hub 4-0:1.0: 4 ports detected
[    1.666487] scsi host0: ahci
[    1.667075] scsi host1: ahci
[    1.667374] scsi host2: ahci
[    1.667697] scsi host3: ahci
[    1.668326] scsi host4: ahci
[    1.668491] ehci-pci 0000:00:1d.0: irq 18, io mem 0x8f040000
[    1.668836] scsi host5: ahci
[    1.668963] ata1: SATA max UDMA/133 abar m2048@0x8f03e000 port 0x8f03e100 irq 31
[    1.669041] ata2: SATA max UDMA/133 abar m2048@0x8f03e000 port 0x8f03e180 irq 31
[    1.669118] ata3: SATA max UDMA/133 abar m2048@0x8f03e000 port 0x8f03e200 irq 31
[    1.669195] ata4: DUMMY
[    1.669252] ata5: DUMMY
[    1.669311] ata6: DUMMY
[    1.683021] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.683515] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[    1.683591] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.683662] usb usb3: Product: EHCI Host Controller
[    1.683720] usb usb3: Manufacturer: Linux 5.18.0-1-amd64 ehci_hcd
[    1.683792] usb usb3: SerialNumber: 0000:00:1d.0
[    1.684123] hub 3-0:1.0: USB hub found
[    1.684232] hub 3-0:1.0: 3 ports detected
[    1.745079] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    1.785278] i915 0000:00:02.0: [drm] VT-d active for gfx access
[    1.785343] i915 0000:00:02.0: vgaarb: deactivate vga console
[    1.786266] Console: switching to colour dummy device 80x25
[    1.786317] i915 0000:00:02.0: [drm] Transparent Hugepage mode 'huge=within_size'
[    1.786333] i915 0000:00:02.0: [drm] DMAR active, disabling use of stolen memory
[    1.838562] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.843491] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 54:ee:75:13:62:87
[    1.843501] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.843542] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    1.892152] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    1.892351] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.915085] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.919068] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[    1.919734] acpi device:0d: registered as cooling_device9
[    1.919793] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    1.939037] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    1.981897] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.982741] ata1.00: supports DRM functions and may not be fully accessible
[    1.982756] ata1.00: ATA-10: KINGSTON SKC6001024G, S4500107, max UDMA/133
[    1.982807] ata1.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.983814] ata1.00: Features: Trust Dev-Sleep
[    1.984002] ata1.00: supports DRM functions and may not be fully accessible
[    1.984914] ata1.00: configured for UDMA/133
[    1.995472] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SKC6001 0107 PQ: 0 ANSI: 5
[    2.075763] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    2.075787] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.076479] hub 1-1:1.0: USB hub found
[    2.076582] hub 1-1:1.0: 6 ports detected
[    2.078677] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 4.02
[    2.078704] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.078712] usb 2-1: Product: USB2.0 Hub
[    2.078717] usb 2-1: Manufacturer: GenesysLogic
[    2.080109] hub 2-1:1.0: USB hub found
[    2.081433] hub 2-1:1.0: 4 ports detected
[    2.095469] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    2.095485] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.095744] hub 3-1:1.0: USB hub found
[    2.095824] hub 3-1:1.0: 8 ports detected
[    2.199223] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[    2.216944] fbcon: i915drmfb (fb0) is primary device
[    2.227533] usb 4-1: New USB device found, idVendor=05e3, idProduct=0616, bcdDevice= 4.02
[    2.227539] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.227541] usb 4-1: Product: USB3.0 Hub
[    2.227543] usb 4-1: Manufacturer: GenesysLogic
[    2.228812] hub 4-1:1.0: USB hub found
[    2.229243] hub 4-1:1.0: 4 ports detected
[    2.310125] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.339840] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
[    2.351049] usb 2-3: new high-speed USB device number 3 using xhci_hcd
[    2.367077] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    2.383092] usb 3-1.5: new full-speed USB device number 3 using ehci-pci
[    2.431433] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    2.453055] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[    2.480722] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01
[    2.480732] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.480736] usb 1-1.3: Product: Biometric Coprocessor
[    2.480739] usb 1-1.3: Manufacturer: Auth
[    2.481307] ata2.00: configured for UDMA/133
[    2.490835] scsi 1:0:0:0: Direct-Access     ATA      ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5
[    2.490895] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[    2.493892] usb 3-1.5: New USB device found, idVendor=056a, idProduct=00e6, bcdDevice= 1.39
[    2.493902] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.493906] usb 3-1.5: Product: ISD-V4
[    2.493909] usb 3-1.5: Manufacturer: Tablet
[    2.499418] usb 2-3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= 0.00
[    2.499428] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.500371] hub 2-3:1.0: USB hub found
[    2.500436] hub 2-3:1.0: 4 ports detected
[    2.563086] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[    2.564127] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905
[    2.564151] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.575044] usb 3-1.6: new full-speed USB device number 4 using ehci-pci
[    2.579091] usb 2-1.2: new high-speed USB device number 4 using xhci_hcd
[    2.609870] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    2.679208] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.11
[    2.679218] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.679222] usb 1-1.4: Product: USB Receiver
[    2.679225] usb 1-1.4: Manufacturer: Logitech
[    2.690688] usb 2-1.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 4.02
[    2.690692] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.690695] usb 2-1.2: Product: USB2.0 Hub
[    2.690696] usb 2-1.2: Manufacturer: GenesysLogic
[    2.692030] hub 2-1.2:1.0: USB hub found
[    2.693325] hub 2-1.2:1.0: 4 ports detected
[    2.693375] usb 3-1.6: New USB device found, idVendor=08e6, idProduct=34ec, bcdDevice= 1.00
[    2.693384] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.693388] usb 3-1.6: Product: GemPC Express
[    2.693391] usb 3-1.6: Manufacturer: Gemplus
[    2.759048] usb 1-1.5: new full-speed USB device number 5 using ehci-pci
[    2.763379] usb 4-1.2: new SuperSpeed USB device number 3 using xhci_hcd
[    2.787753] usb 4-1.2: New USB device found, idVendor=05e3, idProduct=0616, bcdDevice= 4.02
[    2.787763] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.787766] usb 4-1.2: Product: USB3.0 Hub
[    2.787769] usb 4-1.2: Manufacturer: GenesysLogic
[    2.789228] hub 4-1.2:1.0: USB hub found
[    2.789714] hub 4-1.2:1.0: 4 ports detected
[    2.805955] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.806320] ata3.00: supports DRM functions and may not be fully accessible
[    2.806323] ata3.00: ATA-11: KINGSTON SUV500MS240G, 003056RR, max UDMA/133
[    2.806471] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    2.807743] ata3.00: supports DRM functions and may not be fully accessible
[    2.808695] ata3.00: configured for UDMA/133
[    2.809089] scsi 2:0:0:0: Direct-Access     ATA      KINGSTON SUV500M 56RR PQ: 0 ANSI: 5
[    2.863068] usb 2-1.4: new full-speed USB device number 5 using xhci_hcd
[    2.869705] usb 1-1.5: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01
[    2.869715] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.947066] usb 1-1.6: new high-speed USB device number 6 using ehci-pci
[    2.967597] usb 2-1.4: New USB device found, idVendor=10d5, idProduct=6557, bcdDevice=30.02
[    2.967607] usb 2-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.997922] hid: raw HID events driver (C) Jiri Kosina
[    3.043087] usb 2-3.1: new full-speed USB device number 6 using xhci_hcd
[    3.063081] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2ea, bcdDevice= 5.20
[    3.063097] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.063101] usb 1-1.6: Product: Integrated Camera
[    3.063104] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[    3.080122] Console: switching to colour frame buffer device 170x48
[    3.144338] usb 2-3.1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[    3.145030] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    3.146322] usb 2-3.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    3.175360] usb 2-3.1: Product: USB2.0-Ser!
[    3.201196] e1000e 0000:00:19.0 eno0: renamed from eth0
[    3.217129] sd 0:0:0:0: [sda] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB)
[    3.217129] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    3.217133] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.217140] sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    3.217144] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[    3.217158] sd 2:0:0:0: [sdc] Write Protect is off
[    3.217161] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    3.217183] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.218039] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    3.218932] sd 0:0:0:0: [sda] Write Protect is off
[    3.219628] sd 1:0:0:0: [sdb] Write Protect is off
[    3.220315] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.221001] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.221049] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.221708] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.227625] usbcore: registered new interface driver usbhid
[    3.228328] usbhid: USB HID core driver
[    3.235749]  sdc: sdc1 sdc2
[    3.260487]  sdb: sdb1
[    3.263028] usb 2-1.2.3: new high-speed USB device number 7 using xhci_hcd
[    3.275167] sd 2:0:0:0: [sdc] Attached SCSI disk
[    3.277244]  sda: sda1 sda2 < sda5 >
[    3.307369] sd 1:0:0:0: [sdb] Attached SCSI disk
[    3.320184] sd 0:0:0:0: [sda] supports TCG Opal
[    3.320955] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.324840] input: Tablet ISD-V4 Stylus as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5:1.0/0003:056A:00E6.0001/input/input9
[    3.325805] input: Tablet ISD-V4 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5:1.0/0003:056A:00E6.0001/input/input10
[    3.326698] hid-generic 0003:056A:00E6.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input0
[    3.327708] input: Tablet ISD-V4 Touchscreen as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5:1.1/0003:056A:00E6.0002/input/input11
[    3.328498] input: Tablet ISD-V4 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5:1.1/0003:056A:00E6.0002/input/input12
[    3.329287] input: Tablet ISD-V4 Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5:1.1/0003:056A:00E6.0002/input/input13
[    3.330099] hid-generic 0003:056A:00E6.0002: input,hiddev1,hidraw1: USB HID v1.11 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input1
[    3.330993] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C52B.0003/input/input14
[    3.334270] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    3.391312] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input0
[    3.393382] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0004/input/input15
[    3.395014] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0004/input/input16
[    3.419169] usb 2-1.2.3: New USB device found, idVendor=045b, idProduct=0209, bcdDevice= 1.00
[    3.420226] usb 2-1.2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.421587] hub 2-1.2.3:1.0: USB hub found
[    3.422682] hub 2-1.2.3:1.0: 3 ports detected
[    3.455052] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0004/input/input17
[    3.456212] hid-generic 0003:046D:C52B.0004: input,hiddev2,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input1
[    3.457479] hid-generic 0003:046D:C52B.0005: hiddev3,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input2
[    3.458761] input: HID 10d5:6557 as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:10D5:6557.0006/input/input19
[    3.503096] usb 2-3.2: new full-speed USB device number 8 using xhci_hcd
[    3.519648] hid-generic 0003:10D5:6557.0006: input,hidraw5: USB HID v2.00 Keyboard [HID 10d5:6557] on usb-0000:00:14.0-1.4/input0
[    3.521927] input: HID 10d5:6557 Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:10D5:6557.0007/input/input20
[    3.523874] input: HID 10d5:6557 System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:10D5:6557.0007/input/input21
[    3.572995] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8
[    3.587085] input: HID 10d5:6557 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:10D5:6557.0007/input/input22
[    3.588284] hid-generic 0003:10D5:6557.0007: input,hidraw6: USB HID v2.00 Mouse [HID 10d5:6557] on usb-0000:00:14.0-1.4/input1
[    3.634533] usb 2-3.2: New USB device found, idVendor=0922, idProduct=0019, bcdDevice= 0.4e
[    3.635493] usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.636344] usb 2-3.2: Product: DYMO LabelWriter 400
[    3.637195] usb 2-3.2: Manufacturer: DYMO
[    3.638019] usb 2-3.2: SerialNumber: 05042808370556
[    3.711006] usb 2-1.2.3.3: new full-speed USB device number 9 using xhci_hcd
[    3.815038] usb 2-1.2.3.3: New USB device found, idVendor=056d, idProduct=4027, bcdDevice=80.00
[    3.816808] usb 2-1.2.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.818521] usb 2-1.2.3.3: Product: EIZO USB HID Monitor
[    3.820227] usb 2-1.2.3.3: Manufacturer: EIZO
[    3.828328] hid-generic 0003:056D:4027.0008: hiddev4,hidraw2: USB HID v1.10 Device [EIZO EIZO USB HID Monitor] on usb-0000:00:14.0-1.2.3.3/input0
[    3.843809] input: Wacom ISDv4 E6 Pen as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5:1.0/0003:056A:00E6.0001/input/input23
[    3.875565] wacom 0003:056A:00E6.0001: hidraw0: USB HID v1.11 Device [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input0
[    3.891075] usb 2-3.4: new high-speed USB device number 10 using xhci_hcd
[    3.893222] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input2
[    3.968331] input: Wacom ISDv4 E6 Finger as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5:1.1/0003:056A:00E6.0002/input/input27
[    3.970644] wacom 0003:056A:00E6.0002: hidraw1: USB HID v1.11 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input1
[    4.028762] input: Logitech Wireless Device PID:406f Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0005/0003:046D:406F.0009/input/input29
[    4.039684] input: Logitech Wireless Device PID:406f Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0005/0003:046D:406F.0009/input/input30
[    4.045804] hid-generic 0003:046D:406F.0009: input,hidraw4: USB HID v1.11 Keyboard [Logitech Wireless Device PID:406f] on usb-0000:00:1a.0-1.4/input2:1
[    4.048965] input: Logitech Wireless Device PID:405e Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0005/0003:046D:405E.000A/input/input34
[    4.056072] input: Logitech Wireless Device PID:405e Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0005/0003:046D:405E.000A/input/input35
[    4.060353] hid-generic 0003:046D:405E.000A: input,hidraw7: USB HID v1.11 Keyboard [Logitech Wireless Device PID:405e] on usb-0000:00:1a.0-1.4/input2:2
[    4.078907] usb 2-3.4: New USB device found, idVendor=054c, idProduct=01bd, bcdDevice= 5.23
[    4.081106] usb 2-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.083210] usb 2-3.4: Product: Silicon Media R/W
[    4.085233] usb 2-3.4: Manufacturer: Sony
[    4.087262] usb 2-3.4: SerialNumber: 000000132F1B
[    4.103215] usb-storage 2-3.4:1.0: USB Mass Storage device detected
[    4.104554] scsi host6: usb-storage 2-3.4:1.0
[    4.105916] usbcore: registered new interface driver usb-storage
[    4.109630] usbcore: registered new interface driver uas
[    4.241904] input: Logitech MX Ergo as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0005/0003:046D:406F.0009/input/input39
[    4.244623] logitech-hidpp-device 0003:046D:406F.0009: input,hidraw4: USB HID v1.11 Keyboard [Logitech MX Ergo] on usb-0000:00:1a.0-1.4/input2:1
[    4.389930] input: Logitech M720 Triathlon as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0005/0003:046D:405E.000A/input/input40
[    4.392644] logitech-hidpp-device 0003:046D:405E.000A: input,hidraw7: USB HID v1.11 Keyboard [Logitech M720 Triathlon] on usb-0000:00:1a.0-1.4/input2:2
[    4.449931] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    4.452048] device-mapper: uevent: version 1.0.3
[    4.453273] device-mapper: ioctl: 4.46.0-ioctl (2022-02-22) initialised: dm-devel@redhat.com
[    4.555000] raid6: sse2x4   gen() 14957 MB/s
[    4.623000] raid6: sse2x2   gen() 16550 MB/s
[    4.691000] raid6: sse2x1   gen() 13082 MB/s
[    4.691893] raid6: using algorithm sse2x2 gen() 16550 MB/s
[    4.758997] raid6: .... xor() 9147 MB/s, rmw enabled
[    4.759866] raid6: using ssse3x2 recovery algorithm
[    4.761721] xor: automatically using best checksumming function   avx       
[    4.763346] async_tx: api initialized (async)
[    5.145736] scsi 6:0:0:0: Direct-Access     Sony     USB   HS-CF Card 5.23 PQ: 0 ANSI: 0
[    5.149142] scsi 6:0:0:1: Direct-Access     Sony     USB   HS-xD/SM   5.23 PQ: 0 ANSI: 0
[    5.152918] scsi 6:0:0:2: Direct-Access     Sony     USB   HS-MS Card 5.23 PQ: 0 ANSI: 0
[    5.156396] scsi 6:0:0:3: Direct-Access     Sony     USB   HS-SD Card 5.23 PQ: 0 ANSI: 0
[    5.160959] sd 6:0:0:0: [sdd] Media removed, stopped polling
[    5.165698] sd 6:0:0:1: [sde] Media removed, stopped polling
[    5.170280] sd 6:0:0:2: [sdf] Media removed, stopped polling
[    5.177749] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[    5.198138] sd 6:0:0:2: [sdf] Attached SCSI removable disk
[    5.202152] sd 6:0:0:3: [sdg] Media removed, stopped polling
[    5.247754] sd 6:0:0:1: [sde] Attached SCSI removable disk
[    5.259583] sd 6:0:0:3: [sdg] Attached SCSI removable disk
[   24.289301] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes
[   24.419906] PM: Image not found (code -22)
[   24.531856] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Quota mode: none.
[   24.632970] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[   24.749399] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[   24.769222] systemd[1]: Inserted module 'autofs4'
[   24.790802] systemd[1]: systemd 250.4-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[   24.807344] systemd[1]: Detected architecture x86-64.
[   24.809491] systemd[1]: Hostname set to <TP-230t>.
[   25.158778] systemd[1]: /lib/systemd/system/clamav-freshclam.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[   25.160627] systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly.
[   25.186742] systemd[1]: Queued start job for default target Graphical Interface.
[   25.189317] systemd[1]: Created slice Slice /system/getty.
[   25.190673] systemd[1]: Created slice Slice /system/modprobe.
[   25.193311] systemd[1]: Created slice Cryptsetup Units Slice.
[   25.196259] systemd[1]: Created slice Slice /system/systemd-fsck.
[   25.200603] systemd[1]: Created slice User and Session Slice.
[   25.204710] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   25.209452] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   25.213845] systemd[1]: Reached target Local Integrity Protected Volumes.
[   25.218630] systemd[1]: Reached target User and Group Name Lookups.
[   25.220442] systemd[1]: Reached target Remote File Systems.
[   25.225230] systemd[1]: Reached target Slice Units.
[   25.227084] systemd[1]: Reached target Local Verity Protected Volumes.
[   25.231918] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   25.236672] systemd[1]: Listening on LVM2 poll daemon socket.
[   25.241407] systemd[1]: Listening on Syslog Socket.
[   25.246080] systemd[1]: Listening on fsck to fsckd communication Socket.
[   25.250602] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   25.255565] systemd[1]: Listening on Journal Audit Socket.
[   25.260062] systemd[1]: Listening on Journal Socket (/dev/log).
[   25.264631] systemd[1]: Listening on Journal Socket.
[   25.268869] systemd[1]: Listening on udev Control Socket.
[   25.272500] systemd[1]: Listening on udev Kernel Socket.
[   25.277319] systemd[1]: Mounting Huge Pages File System...
[   25.280320] systemd[1]: Mounting POSIX Message Queue File System...
[   25.283215] systemd[1]: Mounting Kernel Debug File System...
[   25.285619] systemd[1]: Mounting Kernel Trace File System...
[   25.287110] systemd[1]: Finished Availability of block devices.
[   25.291108] systemd[1]: Starting Set the console keyboard layout...
[   25.295109] systemd[1]: Starting Create List of Static Device Nodes...
[   25.297260] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   25.299671] systemd[1]: Starting Load Kernel Module configfs...
[   25.301787] systemd[1]: Starting Load Kernel Module drm...
[   25.304008] systemd[1]: Starting Load Kernel Module fuse...
[   25.306731] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[   25.308402] systemd[1]: Starting Journal Service...
[   25.311915] systemd[1]: Starting Load Kernel Modules...
[   25.314238] systemd[1]: Starting Remount Root and Kernel File Systems...
[   25.315954] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
[   25.316297] fuse: init (API version 7.36)
[   25.317192] systemd[1]: Starting Coldplug All udev Devices...
[   25.322431] systemd[1]: Mounted Huge Pages File System.
[   25.323463] systemd[1]: Mounted POSIX Message Queue File System.
[   25.325791] EXT4-fs (dm-1): re-mounted. Quota mode: none.
[   25.326690] systemd[1]: Mounted Kernel Debug File System.
[   25.329077] systemd[1]: Mounted Kernel Trace File System.
[   25.330639] loop: module loaded
[   25.331969] systemd[1]: Finished Set the console keyboard layout.
[   25.333971] systemd[1]: Finished Create List of Static Device Nodes.
[   25.335959] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[   25.336091] systemd[1]: Finished Load Kernel Module configfs.
[   25.338618] systemd[1]: modprobe@drm.service: Deactivated successfully.
[   25.338751] systemd[1]: Finished Load Kernel Module drm.
[   25.341305] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[   25.341433] systemd[1]: Finished Load Kernel Module fuse.
[   25.345071] systemd[1]: Finished Remount Root and Kernel File Systems.
[   25.346349] lp: driver loaded but no devices found
[   25.349566] systemd[1]: Mounting FUSE Control File System...
[   25.351467] systemd[1]: Mounting Kernel Configuration File System...
[   25.352595] ppdev: user-space parallel port driver
[   25.353804] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[   25.354734] systemd[1]: Starting Load/Save Random Seed...
[   25.357742] systemd[1]: Starting Create System Users...
[   25.361001] systemd[1]: Finished Load Kernel Modules.
[   25.362294] systemd[1]: Mounted FUSE Control File System.
[   25.364173] systemd[1]: Mounted Kernel Configuration File System.
[   25.365736] systemd[1]: Finished Load/Save Random Seed.
[   25.368523] systemd[1]: First Boot Complete was skipped because of a failed condition check (ConditionFirstBoot=yes).
[   25.369466] systemd[1]: Starting Apply Kernel Variables...
[   25.374694] systemd[1]: Finished Create System Users.
[   25.376514] systemd[1]: Starting Create Static Device Nodes in /dev...
[   25.378718] systemd[1]: Finished Apply Kernel Variables.
[   25.389723] systemd[1]: Finished Create Static Device Nodes in /dev.
[   25.391952] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[   25.403858] systemd[1]: Started Journal Service.
[   25.412922] systemd-journald[553]: Received client request to flush runtime journal.
[   25.574615] ACPI: AC: AC Adapter [AC] (on-line)
[   25.607848] iTCO_vendor_support: vendor-support=0
[   25.609604] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   25.611885] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   25.611936] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   25.616239] sd 6:0:0:0: Attached scsi generic sg3 type 0
[   25.617203] sd 6:0:0:1: Attached scsi generic sg4 type 0
[   25.619840] sd 6:0:0:2: Attached scsi generic sg5 type 0
[   25.623471] sd 6:0:0:3: Attached scsi generic sg6 type 0
[   25.628046] iTCO_wdt iTCO_wdt.1.auto: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[   25.632244] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[   25.643121] Non-volatile memory driver v1.3
[   25.711515] input: PC Speaker as /devices/platform/pcspkr/input/input41
[   25.712700] at24 0-0050: supply vcc not found, using dummy regulator
[   25.714190] at24 0-0050: 256 byte spd EEPROM, read-only
[   25.715118] at24 0-0051: supply vcc not found, using dummy regulator
[   25.717035] at24 0-0051: 256 byte spd EEPROM, read-only
[   25.728173] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[   25.729001] thinkpad_acpi: http://ibm-acpi.sf.net/
[   25.729951] thinkpad_acpi: ThinkPad BIOS CBET4000 CoreBoot 4.17 X230 Tablet, EC GCHT25WW-3.22
[   25.730801] thinkpad_acpi: Lenovo ThinkPad X230 Tablet, model 20OJKGY
[   25.732158] thinkpad_acpi: radio switch found; radios are enabled
[   25.733121] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[   25.733979] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[   25.734843] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[   25.737082] thinkpad_acpi: asked for hotkey mask 0x078c7fff, but firmware forced it to 0x00000000
[   25.738923] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[   25.742153] thinkpad_acpi: asked for hotkey mask 0x00020000, but firmware forced it to 0x00000000
[   25.743038] thinkpad_acpi: required events 0x00020000 not enabled!
[   25.746248] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[   25.747826] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[   25.749706] thinkpad_acpi: asked for hotkey mask 0x00720000, but firmware forced it to 0x00000000
[   25.750607] thinkpad_acpi: required events 0x00720000 not enabled!
[   25.752256] thinkpad_acpi: secondary fan control detected & enabled
[   25.754398] thinkpad_acpi: battery 1 registered (start 0, stop 100, behaviours: 0x1)
[   25.755366] ACPI: battery: new extension: ThinkPad Battery Extension
[   25.756473] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input42
[   25.783867] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   25.784191] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[   25.784478] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[   25.784775] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   25.787004] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[   25.787142] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[   25.807424] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   25.807428] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   25.807430] RAPL PMU: hw unit of domain package 2^-16 Joules
[   25.807431] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   25.831751] Intel(R) Wireless WiFi driver for Linux
[   25.838732] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   25.857083] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-cc-a0-72.ucode (-2)
[   25.858041] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[   25.859064] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-72.ucode failed with error -2
[   25.869144] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-cc-a0-71.ucode
[   25.870185] iwlwifi 0000:02:00.0: api flags index 2 larger than supported by driver
[   25.871222] iwlwifi 0000:02:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
[   25.874281] iwlwifi 0000:02:00.0: firmware: failed to load iwl-debug-yoyo.bin (-2)
[   25.877194] iwlwifi 0000:02:00.0: loaded firmware version 71.058653f6.0 cc-a0-71.ucode op_mode iwlmvm
[   25.877357] Adding 1003516k swap on /dev/mapper/TP--230t--vg-swap_1.  Priority:-2 extents:1 across:1003516k SSFS
[   25.958644] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   25.959730] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   25.960755] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[   25.961770] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   25.962859] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   25.963876] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   25.964662] snd_hda_codec_realtek hdaudioC0D0:      Dock Mic=0x19
[   25.965516] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   26.054923] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input43
[   26.061184] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input44
[   26.062229] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input45
[   26.064694] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input46
[   26.066775] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input47
[   26.068055] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input48
[   26.069132] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input49
[   26.070253] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input50
[   26.145952] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[   26.148472] EXT4-fs (sda1): mounted filesystem without journal. Quota mode: none.
[   26.159262] iwlwifi 0000:02:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340
[   26.160082] thermal thermal_zone3: failed to read out thermal zone (-61)
[   26.163532] intel_rapl_common: Found RAPL domain package
[   26.164247] intel_rapl_common: Found RAPL domain core
[   26.164934] intel_rapl_common: Found RAPL domain uncore
[   26.260855] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Quota mode: none.
[   26.288459] iwlwifi 0000:02:00.0: Detected RF HR B3, rfid=0x10a100
[   26.299415] audit: type=1400 audit(1655559336.832:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1560 comm="apparmor_parser"
[   26.301133] audit: type=1400 audit(1655559336.832:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1553 comm="apparmor_parser"
[   26.302918] audit: type=1400 audit(1655559336.832:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=1559 comm="apparmor_parser"
[   26.304900] audit: type=1400 audit(1655559336.832:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1554 comm="apparmor_parser"
[   26.306880] audit: type=1400 audit(1655559336.832:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1554 comm="apparmor_parser"
[   26.308825] audit: type=1400 audit(1655559336.832:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1557 comm="apparmor_parser"
[   26.310614] audit: type=1400 audit(1655559336.832:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1557 comm="apparmor_parser"
[   26.310618] audit: type=1400 audit(1655559336.832:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1557 comm="apparmor_parser"
[   26.310621] audit: type=1400 audit(1655559336.836:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=1556 comm="apparmor_parser"
[   26.310623] audit: type=1400 audit(1655559336.836:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1562 comm="apparmor_parser"
[   26.402276] iwlwifi 0000:02:00.0: base HW address: 34:13:e8:b5:b1:7f
[   26.421412] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[   26.638240] process '/usr/bin/anydesk' started with executable stack
[   26.680506] NET: Registered PF_QIPCRTR protocol family
[   27.455909] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[   27.469575] mc: Linux media interface: v0.10
[   27.502286] usblp 2-3.2:1.0: usblp1: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x0922 pid 0x0019
[   27.505064] usbcore: registered new interface driver usblp
[   27.508900] videodev: Linux video capture interface: v2.00
[   27.563026] usbcore: registered new interface driver usbserial_generic
[   27.563049] usbserial: USB Serial support registered for generic
[   27.578896] usbcore: registered new interface driver ch341
[   27.578923] usbserial: USB Serial support registered for ch341-uart
[   27.578955] ch341 2-3.1:1.0: ch341-uart converter detected
[   27.581149] ch341-uart ttyUSB0: break control not supported, using simulated break
[   27.583227] usb 2-3.1: ch341-uart converter now attached to ttyUSB0
[   27.611390] usb 1-1.6: Found UVC 1.00 device Integrated Camera (04f2:b2ea)
[   27.619859] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input51
[   27.620253] usbcore: registered new interface driver uvcvideo
[   27.685425] Bluetooth: Core ver 2.22
[   27.685483] NET: Registered PF_BLUETOOTH protocol family
[   27.685487] Bluetooth: HCI device and connection manager initialized
[   27.685494] Bluetooth: HCI socket layer initialized
[   27.685499] Bluetooth: L2CAP socket layer initialized
[   27.685507] Bluetooth: SCO socket layer initialized
[   27.724446] usbcore: registered new interface driver btusb
[   27.724899] Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017
[   27.726274] Bluetooth: hci0: Device revision is 1
[   27.726280] Bluetooth: hci0: Secure boot is enabled
[   27.726283] Bluetooth: hci0: OTP lock is enabled
[   27.726285] Bluetooth: hci0: API lock is enabled
[   27.726287] Bluetooth: hci0: Debug lock is disabled
[   27.726289] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[   27.731761] bluetooth hci0: firmware: direct-loading firmware intel/ibt-20-1-3.sfi
[   27.731773] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi
[   27.731903] Bluetooth: hci0: Boot Address: 0x24800
[   27.731906] Bluetooth: hci0: Firmware Version: 126-5.22
[   27.814141] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   27.814150] Bluetooth: BNEP filters: protocol multicast
[   27.814158] Bluetooth: BNEP socket layer initialized
[   29.399875] Bluetooth: hci0: Waiting for firmware download to complete
[   29.400241] Bluetooth: hci0: Firmware loaded in 1629359 usecs
[   29.400305] Bluetooth: hci0: Waiting for device to boot
[   29.415251] Bluetooth: hci0: Device booted in 14624 usecs
[   29.415538] bluetooth hci0: firmware: direct-loading firmware intel/ibt-20-1-3.ddc
[   29.415545] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddc
[   29.417265] Bluetooth: hci0: Applying Intel DDC parameters completed
[   29.418270] Bluetooth: hci0: Firmware revision 0.3 build 126 week 5 2022
[   29.506899] NET: Registered PF_ALG protocol family
[   29.741026] e1000e 0000:00:19.0 eno0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[   29.741099] IPv6: ADDRCONF(NETDEV_CHANGE): eno0: link becomes ready
[   30.319829] wlp2s0: authenticate with 44:4e:6d:04:50:0f
[   30.319853] wlp2s0: Invalid HE elem, Disable HE
[   30.327214] wlp2s0: send auth to 44:4e:6d:04:50:0f (try 1/3)
[   30.473311] wlp2s0: authenticate with 44:4e:6d:04:50:0f
[   30.473322] wlp2s0: send auth to 44:4e:6d:04:50:0f (try 1/3)
[   30.509046] wlp2s0: authenticated
[   30.511154] wlp2s0: associate with 44:4e:6d:04:50:0f (try 1/3)
[   30.516686] wlp2s0: RX AssocResp from 44:4e:6d:04:50:0f (capab=0x1511 status=0 aid=1)
[   30.526979] wlp2s0: associated
[   30.823865] wlp2s0: Limiting TX power to 27 (30 - 3) dBm as advertised by 44:4e:6d:04:50:0f
[   30.904129] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   32.026871] kauditd_printk_skb: 18 callbacks suppressed
[   32.026875] audit: type=1400 audit(1655559342.556:30): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=3482 comm="cups-browsed" capability=23  capname="sys_nice"
[   32.712134] rfkill: input handler disabled
[   32.891393] usblp1: removed
[   32.898877] usblp 2-3.2:1.0: usblp1: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x0922 pid 0x0019
[   40.328986] rfkill: input handler enabled
[   43.796220] rfkill: input handler disabled
