[    0.000000] Linux version 4.14.15-1-ARCH (builduser@heftig) (gcc version 7.2.1 20180116 (GCC)) #1 SMP PREEMPT Tue Jan 23 21:49:25 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/cryptVolume-root rw cryptdevice=/dev/sda2:cryptVolume quiet intel_idle.max_cstate=1
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bff02fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bff03000-0x00000000c29fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043b5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 4299GR7/4299GR7, BIOS CBET4000 x220-starbuck 11/07/2017
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x43b600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0C0000000 mask FE0000000 uncachable
[    0.000000]   1 base 0E0000000 mask FF0000000 write-combining
[    0.000000]   2 base 0F0000000 mask FF0000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0xbff03 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff9c0340099000] 99000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x34662d000, 0x34662dfff] PGTABLE
[    0.000000] BRK [0x34662e000, 0x34662efff] PGTABLE
[    0.000000] BRK [0x34662f000, 0x34662ffff] PGTABLE
[    0.000000] BRK [0x346630000, 0x346630fff] PGTABLE
[    0.000000] BRK [0x346631000, 0x346631fff] PGTABLE
[    0.000000] BRK [0x346632000, 0x346632fff] PGTABLE
[    0.000000] BRK [0x346633000, 0x346633fff] PGTABLE
[    0.000000] BRK [0x346634000, 0x346634fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x351d3000-0x368e0fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F08B0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000BFF170E0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000BFF1A940 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000BFF17280 0036BF (v02 COREv4 COREBOOT 20110725 INTL 20161222)
[    0.000000] ACPI: FACS 0x00000000BFF17240 000040
[    0.000000] ACPI: FACS 0x00000000BFF17240 000040
[    0.000000] ACPI: SSDT 0x00000000BFF1AA40 001595 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: MCFG 0x00000000BFF1BFE0 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: TCPA 0x00000000BFF1C020 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x00000000BFF1C060 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DMAR 0x00000000BFF1C0D0 0000A8 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000BFF1E180 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000043b5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x43b5f0000-0x43b5f3fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000043b5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000bff02fff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000043b5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043b5fffff]
[    0.000000] On node 0 totalpages: 4173985
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 158 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12205 pages used for memmap
[    0.000000]   DMA32 zone: 781059 pages, LIFO batch:31
[    0.000000]   Normal zone: 52952 pages used for memmap
[    0.000000]   Normal zone: 3388928 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000c0a00000-0x00000000c29fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbff03000-0xc29fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc2a00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[    0.000000] e820: [mem 0xc2a00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 42 pages/cpu @ffff9c077b200000 s134168 r8192 d29672 u524288
[    0.000000] pcpu-alloc: s134168 r8192 d29672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4108606
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/cryptVolume-root rw cryptdevice=/dev/sda2:cryptVolume quiet intel_idle.max_cstate=1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16320020K/16695940K available (10252K kernel code, 1157K rwdata, 2792K rodata, 1360K init, 992K bss, 375920K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 29122 entries in 114 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 8448, nr_irqs: 456, preallocated irqs: 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.003333] tsc: Detected 2491.844 MHz processor
[    0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 4985.34 BogoMIPS (lpj=8306146)
[    0.003333] pid_max: default: 32768 minimum: 301
[    0.003333] ACPI: Core revision 20170728
[    0.008670] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.008693] Security Framework initialized
[    0.008694] Yama: becoming mindful.
[    0.010938] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.012082] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.012132] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.012170] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.012365] CPU: Physical Processor ID: 0
[    0.012365] CPU: Processor Core ID: 0
[    0.012374] mce: CPU supports 7 MCE banks
[    0.012381] CPU0: Thermal monitoring enabled (TM1)
[    0.012390] process: using mwait in idle threads
[    0.012393] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.012394] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.012396] Spectre V2 mitigation: Mitigation: Full generic retpoline
[    0.012487] Freeing SMP alternatives memory: 24K
[    0.013231] smpboot: Max logical packages: 2
[    0.013236] DMAR: Host address width 36
[    0.013238] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.013248] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.013249] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.013252] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.013254] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.013255] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.013256] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.013639] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.013641] x2apic enabled
[    0.013646] Switched APIC routing to cluster x2apic.
[    0.014099] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.047120] TSC deadline timer enabled
[    0.047123] smpboot: CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.060021] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.060091] ... version:                3
[    0.060092] ... bit width:              48
[    0.060093] ... generic registers:      4
[    0.060093] ... value mask:             0000ffffffffffff
[    0.060094] ... max period:             00007fffffffffff
[    0.060095] ... fixed-purpose events:   3
[    0.060095] ... event mask:             000000070000000f
[    0.066675] Hierarchical SRCU implementation.
[    0.080153] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.086674] smp: Bringing up secondary CPUs ...
[    0.113367] x86: Booting SMP configuration:
[    0.113370] .... node  #0, CPUs:      #1 #2 #3
[    0.173144] smp: Brought up 1 node, 4 CPUs
[    0.173144] smpboot: Total of 4 processors activated (19942.36 BogoMIPS)
[    0.173902] devtmpfs: initialized
[    0.173902] x86/mm: Memory block size: 128MB
[    0.174538] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.174538] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.174538] pinctrl core: initialized pinctrl subsystem
[    0.174538] RTC time: 10:18:36, date: 02/05/18
[    0.174538] NET: Registered protocol family 16
[    0.174538] cpuidle: using governor ladder
[    0.176702] cpuidle: using governor menu
[    0.176731] ACPI: bus type PCI registered
[    0.176733] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.176790] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.176792] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.176801] PCI: Using configuration type 1 for base access
[    0.176825] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.177437] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.177437] ACPI: Added _OSI(Module Device)
[    0.177437] ACPI: Added _OSI(Processor Device)
[    0.177437] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.177437] ACPI: Added _OSI(Processor Aggregator Device)
[    0.177437] ACPI: Executed 1 blocks of module-level executable AML code
[    0.180600] ACPI: EC: EC started
[    0.180600] ACPI: EC: interrupt blocked
[    0.180655] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.180657] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.180659] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.180659] ACPI: Interpreter enabled
[    0.180676] ACPI: (supports S0 S3 S4 S5)
[    0.180677] ACPI: Using IOAPIC for interrupt routing
[    0.180696] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.180806] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.187327] ACPI: Power Resource [FPWR] (off)
[    0.188038] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.188043] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.188088] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.188097] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.188149] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c67ff])
[    0.188283] PCI host bridge to bus 0000:00
[    0.188285] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.188286] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.188288] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.188289] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.188291] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.188292] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.188294] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.188295] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.188296] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.188298] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.188299] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.188300] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.188302] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.188303] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.188304] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.188306] pci_bus 0000:00: root bus resource [mem 0xc2a00001-0xf7ffffff window]
[    0.188307] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.188309] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.188317] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.188400] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[    0.188410] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit]
[    0.188416] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.188420] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.188492] pci 0000:00:04.0: [8086:0103] type 00 class 0x118000
[    0.188502] pci 0000:00:04.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
[    0.188600] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.188620] pci 0000:00:19.0: reg 0x10: [mem 0xf1600000-0xf161ffff]
[    0.188629] pci 0000:00:19.0: reg 0x14: [mem 0xf162c000-0xf162cfff]
[    0.188638] pci 0000:00:19.0: reg 0x18: [io  0x3040-0x305f]
[    0.188698] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.188758] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.188781] pci 0000:00:1a.0: reg 0x10: [mem 0xf162e000-0xf162e3ff]
[    0.188865] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.188932] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.188955] pci 0000:00:1b.0: reg 0x10: [mem 0xf1628000-0xf162bfff 64bit]
[    0.189030] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.189105] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.189232] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.189314] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.189451] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.189537] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.189673] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.189756] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.189893] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.189976] pci 0000:00:1c.5: [8086:1c1c] type 01 class 0x060400
[    0.190107] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.190192] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.190215] pci 0000:00:1d.0: reg 0x10: [mem 0xf162f000-0xf162f3ff]
[    0.190299] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.190365] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[    0.190532] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.190553] pci 0000:00:1f.2: reg 0x10: [io  0x3080-0x3087]
[    0.190561] pci 0000:00:1f.2: reg 0x14: [io  0x3090-0x3093]
[    0.190570] pci 0000:00:1f.2: reg 0x18: [io  0x3088-0x308f]
[    0.190579] pci 0000:00:1f.2: reg 0x1c: [io  0x3094-0x3097]
[    0.190587] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.190596] pci 0000:00:1f.2: reg 0x24: [mem 0xf162d000-0xf162d7ff]
[    0.190642] pci 0000:00:1f.2: PME# supported from D3hot
[    0.190702] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.190722] pci 0000:00:1f.3: reg 0x10: [mem 0xf1630000-0xf16300ff 64bit]
[    0.190743] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.190872] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.191105] pci 0000:02:00.0: [8086:0085] type 00 class 0x028000
[    0.191340] pci 0000:02:00.0: reg 0x10: [mem 0xf1400000-0xf1401fff 64bit]
[    0.192104] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.200149] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.200159] pci 0000:00:1c.1:   bridge window [mem 0xf1400000-0xf14fffff]
[    0.200243] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.200248] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.200253] pci 0000:00:1c.3:   bridge window [mem 0xf0800000-0xf0ffffff]
[    0.200261] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[    0.200358] pci 0000:04:00.0: [1180:e823] type 00 class 0x080501
[    0.200399] pci 0000:04:00.0: MMC controller base frequency changed to 50Mhz.
[    0.200452] pci 0000:04:00.0: reg 0x10: [mem 0xf1500000-0xf15000ff]
[    0.200768] pci 0000:04:00.0: supports D1 D2
[    0.200769] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.210051] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.210066] pci 0000:00:1c.4:   bridge window [mem 0xf1500000-0xf15fffff]
[    0.210148] pci 0000:00:1c.5: PCI bridge to [bus 05]
[    0.210291] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.210336] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.210380] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.210422] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.210465] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.210507] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.210549] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.210591] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.211774] ACPI: EC: interrupt unblocked
[    0.211780] ACPI: EC: event unblocked
[    0.211788] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.211789] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.211844] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.211844] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.211844] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.211844] vgaarb: loaded
[    0.211844] EDAC MC: Ver: 3.0.0
[    0.211844] PCI: Using ACPI for IRQ routing
[    0.213599] PCI: pci_cache_line_size set to 64 bytes
[    0.213714] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.213715] e820: reserve RAM buffer [mem 0xbff03000-0xbfffffff]
[    0.213716] e820: reserve RAM buffer [mem 0x43b600000-0x43bffffff]
[    0.213800] NetLabel: Initializing
[    0.213801] NetLabel:  domain hash size = 128
[    0.213801] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.213816] NetLabel:  unlabeled traffic allowed by default
[    0.213829] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.213829] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.216692] clocksource: Switched to clocksource hpet
[    0.226116] VFS: Disk quotas dquot_6.6.0
[    0.226137] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.226194] pnp: PnP ACPI init
[    0.226297] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.226299] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.226300] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.226302] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.226304] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.226305] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.226307] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.226309] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.226310] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
[    0.226312] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
[    0.226317] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.226833] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.226838] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.226875] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.226876] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.226880] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.226901] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.226928] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.226951] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.226969] pnp: PnP ACPI: found 6 devices
[    0.233188] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.233251] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.233269] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.233276] pci 0000:00:1c.1:   bridge window [mem 0xf1400000-0xf14fffff]
[    0.233288] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.233291] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.233297] pci 0000:00:1c.3:   bridge window [mem 0xf0800000-0xf0ffffff]
[    0.233302] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[    0.233310] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.233317] pci 0000:00:1c.4:   bridge window [mem 0xf1500000-0xf15fffff]
[    0.233329] pci 0000:00:1c.5: PCI bridge to [bus 05]
[    0.233356] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.233357] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.233359] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.233361] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.233362] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[    0.233363] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[    0.233365] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.233366] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.233368] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.233369] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.233371] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.233372] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.233373] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.233375] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.233376] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.233378] pci_bus 0000:00: resource 19 [mem 0xc2a00001-0xf7ffffff window]
[    0.233379] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[    0.233381] pci_bus 0000:02: resource 1 [mem 0xf1400000-0xf14fffff]
[    0.233382] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.233384] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf0ffffff]
[    0.233385] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf07fffff 64bit pref]
[    0.233387] pci_bus 0000:04: resource 1 [mem 0xf1500000-0xf15fffff]
[    0.233453] NET: Registered protocol family 2
[    0.233596] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.233812] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.233935] TCP: Hash tables configured (established 131072 bind 65536)
[    0.233978] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.234025] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.234104] NET: Registered protocol family 1
[    0.234122] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.234563] PCI: CLS 64 bytes, default 64
[    0.234608] Unpacking initramfs...
[    0.284155] Freeing initrd memory: 23608K
[    0.284195] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.284198] software IO TLB [mem 0xbbf03000-0xbff03000] (64MB) mapped at [ffff9c03fbf03000-ffff9c03fff02fff]
[    0.284409] Scanning for low memory corruption every 60 seconds
[    0.284935] Initialise system trusted keyrings
[    0.284944] Key type blacklist registered
[    0.284991] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.285929] zbud: loaded
[    0.287663] Key type asymmetric registered
[    0.287698] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.287734] io scheduler noop registered
[    0.287735] io scheduler deadline registered
[    0.287774] io scheduler cfq registered (default)
[    0.287775] io scheduler mq-deadline registered
[    0.287776] io scheduler kyber registered
[    0.287795] io scheduler bfq registered
[    0.288826] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
[    0.288852] pcieport 0000:00:1c.1: Signaling PME with IRQ 27
[    0.288873] pcieport 0000:00:1c.3: Signaling PME with IRQ 28
[    0.288893] pcieport 0000:00:1c.4: Signaling PME with IRQ 29
[    0.288914] pcieport 0000:00:1c.5: Signaling PME with IRQ 30
[    0.288942] pciehp 0000:00:1c.3:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.288982] intel_idle: MWAIT substates: 0x21120
[    0.288983] intel_idle: v0.4.1 model 0x2A
[    0.288985] intel_idle: max_cstate 1 reached
[    0.289070] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.289575] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.290260] rtc_cmos 00:03: RTC can wake from S4
[    0.290377] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.290411] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.290420] intel_pstate: Intel P-state driver initializing
[    0.290581] ledtrig-cpu: registered to indicate activity on CPUs
[    0.290651] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[    0.291245] NET: Registered protocol family 10
[    0.300700] Segment Routing with IPv6
[    0.300722] NET: Registered protocol family 17
[    0.300971] RAS: Correctable Errors collector initialized.
[    0.301001] microcode: sig=0x206a7, pf=0x10, revision=0x29
[    0.301070] microcode: Microcode Update Driver: v2.2.
[    0.301081] sched_clock: Marking stable (301065378, 0)->(298882853, 2182525)
[    0.301314] registered taskstats version 1
[    0.301321] Loading compiled-in X.509 certificates
[    0.301343] zswap: loaded using pool lzo/zbud
[    0.304545] Key type big_key registered
[    0.304838]   Magic number: 6:679:324
[    0.304852] tty tty49: hash matches
[    0.304866] acpi PNP0B00:00: hash matches
[    0.304944] rtc_cmos 00:03: setting system clock to 2018-02-05 10:18:37 UTC (1517825917)
[    0.308100] Freeing unused kernel memory: 1360K
[    0.308101] Write protecting the kernel read-only data: 16384k
[    0.308656] Freeing unused kernel memory: 2016K
[    0.312104] Freeing unused kernel memory: 1304K
[    0.372492] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.376755] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.376815] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.378140] ACPI: bus type USB registered
[    0.378164] usbcore: registered new interface driver usbfs
[    0.378174] usbcore: registered new interface driver hub
[    0.378203] usbcore: registered new device driver usb
[    0.379622] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.379904] ehci-pci: EHCI PCI platform driver
[    0.380077] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.380084] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.380099] ehci-pci 0000:00:1a.0: debug port 2
[    0.380401] sdhci: Secure Digital Host Controller Interface driver
[    0.380401] sdhci: Copyright(c) Pierre Ossman
[    0.382820] sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e823] (rev 4)
[    0.382976] SCSI subsystem initialized
[    0.383291] mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA
[    0.384010] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.384027] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf162e000
[    0.387597] libata version 3.00 loaded.
[    0.388164] AVX version of gcm_enc/dec engaged.
[    0.388164] AES CTR mode by8 optimization enabled
[    0.396700] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.398084] hub 1-0:1.0: USB hub found
[    0.398093] hub 1-0:1.0: 3 ports detected
[    0.399712] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.399720] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.399735] ehci-pci 0000:00:1d.0: debug port 2
[    0.403631] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.403657] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf162f000
[    0.407290] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.416718] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.416891] hub 2-0:1.0: USB hub found
[    0.416904] hub 2-0:1.0: 3 ports detected
[    0.417104] ahci 0000:00:1f.2: version 3.0
[    0.417312] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.427413] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[    0.427417] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    0.428123] scsi host0: ahci
[    0.428285] scsi host1: ahci
[    0.428414] scsi host2: ahci
[    0.428546] scsi host3: ahci
[    0.428680] scsi host4: ahci
[    0.428808] scsi host5: ahci
[    0.428882] ata1: SATA max UDMA/133 abar m2048@0xf162d000 port 0xf162d100 irq 31
[    0.428886] ata2: SATA max UDMA/133 abar m2048@0xf162d000 port 0xf162d180 irq 31
[    0.428890] ata3: SATA max UDMA/133 abar m2048@0xf162d000 port 0xf162d200 irq 31
[    0.428892] ata4: DUMMY
[    0.428894] ata5: DUMMY
[    0.428895] ata6: DUMMY
[    0.726696] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.739814] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.741726] ata1.00: supports DRM functions and may not be fully accessible
[    0.742096] ata1.00: NCQ Send/Recv Log not supported
[    0.742099] ata1.00: ATA-9: SAMSUNG MZ7TE256HMHP-000L7, EXT09L6Q, max UDMA/133
[    0.742102] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    0.742795] ata1.00: supports DRM functions and may not be fully accessible
[    0.743156] ata1.00: NCQ Send/Recv Log not supported
[    0.743621] ata1.00: configured for UDMA/133
[    0.743851] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG MZ7TE256 9L6Q PQ: 0 ANSI: 5
[    0.746702] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.874512] hub 1-1:1.0: USB hub found
[    0.874581] hub 1-1:1.0: 6 ports detected
[    0.894007] hub 2-1:1.0: USB hub found
[    0.894085] hub 2-1:1.0: 8 ports detected
[    1.056502] ata2: SATA link down (SStatus 0 SControl 300)
[    1.153383] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    1.173373] usb 2-1.4: new high-speed USB device number 3 using ehci-pci
[    1.303399] tsc: Refined TSC clocksource calibration: 2491.905 MHz
[    1.303418] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23eb5abbd7b, max_idle_ns: 440795277677 ns
[    1.330049] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[    1.369826] ata3: SATA link down (SStatus 0 SControl 300)
[    1.377268] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.377320] sd 0:0:0:0: [sda] Write Protect is off
[    1.377329] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.377413] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.380369]  sda: sda1 sda2
[    1.381601] sd 0:0:0:0: [sda] supports TCG Opal
[    1.381603] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.393374] usb 2-1.5: new full-speed USB device number 4 using ehci-pci
[    1.458559] device-mapper: uevent: version 1.0.3
[    1.458646] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.496066] hidraw: raw HID events driver (C) Jiri Kosina
[    1.506712] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[    1.506756] usbcore: registered new interface driver usbhid
[    1.506758] usbhid: USB HID core driver
[    2.316837] clocksource: Switched to clocksource tsc
[    7.011143] NET: Registered protocol family 38
[    7.373370] raid6: sse2x1   gen()  8908 MB/s
[    7.430028] raid6: sse2x1   xor()  6210 MB/s
[    7.486695] raid6: sse2x2   gen() 10701 MB/s
[    7.543360] raid6: sse2x2   xor()  7217 MB/s
[    7.600027] raid6: sse2x4   gen() 12720 MB/s
[    7.656694] raid6: sse2x4   xor()  8094 MB/s
[    7.656694] raid6: using algorithm sse2x4 gen() 12720 MB/s
[    7.656695] raid6: .... xor() 8094 MB/s, rmw enabled
[    7.656696] raid6: using ssse3x2 recovery algorithm
[    7.659215] xor: automatically using best checksumming function   avx       
[    7.680353] Btrfs loaded, crc32c=crc32c-intel
[    7.682524] BTRFS: device fsid c4baf066-fe52-40b9-89ce-2eb6959a9ccf devid 1 transid 19384 /dev/dm-2
[    7.682731] BTRFS: device fsid 8e252423-aea0-4eef-b136-9239142126c0 devid 1 transid 19510 /dev/dm-1
[    7.711914] BTRFS info (device dm-1): disk space caching is enabled
[    7.711918] BTRFS info (device dm-1): has skinny extents
[    7.731642] BTRFS info (device dm-1): enabling ssd optimizations
[    7.909263] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.915812] systemd[1]: systemd 236 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    7.930168] systemd[1]: Detected architecture x86-64.
[    7.930965] systemd[1]: Set hostname to <x220-starbuck>.
[    7.990200] systemd[1]: Created slice System Slice.
[    7.990841] systemd[1]: Mounting POSIX Message Queue File System...
[    7.992519] systemd[1]: Listening on Process Core Dump Socket.
[    7.992616] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.992637] systemd[1]: Reached target Remote File Systems.
[    7.992710] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.992779] systemd[1]: Listening on udev Kernel Socket.
[    8.017553] vboxdrv: loading out-of-tree module taints kernel.
[    8.028451] vboxdrv: Found 4 processor cores
[    8.050183] vboxdrv: TSC mode is Invariant, tentative frequency 2491904659 Hz
[    8.050185] vboxdrv: Successfully loaded version 5.2.6 (interface 0x00290000)
[    8.071544] BTRFS info (device dm-1): disk space caching is enabled
[    8.073488] VBoxPciLinuxInit
[    8.087821] vboxpci: IOMMU not found (not registered)
[    8.108557] VBoxNetAdp: Successfully started.
[    8.111986] systemd-journald[314]: Received request to flush runtime journal from PID 1
[    8.118290] VBoxNetFlt: Successfully started.
[    8.820843] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/PNP0C09:00/PNP0C0E:00/input/input2
[    8.820868] ACPI: Sleep Button [SLPB]
[    8.821183] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/PNP0C09:00/PNP0C0D:00/input/input3
[    8.821296] ACPI: Lid Switch [LID]
[    8.821355] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    8.821369] ACPI: Power Button [PWRF]
[    8.854375] ACPI: AC Adapter [AC] (off-line)
[    8.856834] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.857586] pps_core: LinuxPPS API ver. 1 registered
[    8.857588] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    8.862895] PTP clock support registered
[    8.862970] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170728/utaddress-247)
[    8.862976] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.862979] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170728/utaddress-247)
[    8.862983] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.862984] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170728/utaddress-247)
[    8.862987] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.862988] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170728/utaddress-247)
[    8.862992] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.862992] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.865345] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    8.870997] ACPI: Battery Slot [BAT0] (battery present)
[    8.871134] ACPI: Battery Slot [BAT1] (battery absent)
[    8.874513] thermal LNXTHERM:00: registered as thermal_zone0
[    8.874516] ACPI: Thermal Zone [THM0] (34 C)
[    8.875248] thermal LNXTHERM:01: registered as thermal_zone1
[    8.875249] ACPI: Thermal Zone [THM1] (27 C)
[    8.885228] Non-volatile memory driver v1.3
[    8.888214] Linux agpgart interface v0.103
[    8.906867] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    8.906869] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    8.914449] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    8.914451] thinkpad_acpi: http://ibm-acpi.sf.net/
[    8.914452] thinkpad_acpi: ThinkPad BIOS CBET4000 x220-starbuck, EC 8DHT29WW-3.20
[    8.914453] thinkpad_acpi: Lenovo ThinkPad X220 Tablet, model 4299GR7
[    8.914591] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    8.916972] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[    8.917057] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    8.917058] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    8.919706] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    8.922043] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    8.922209] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    8.926559] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[    8.926662] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    8.939512] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    8.939514] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    8.939515] RAPL PMU: hw unit of domain package 2^-16 Joules
[    8.939516] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    9.002157] Intel(R) Wireless WiFi driver for Linux
[    9.002159] Copyright(c) 2003- 2015 Intel Corporation
[    9.010638] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    9.043982] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    9.105218] intel_rapl: Found RAPL domain package
[    9.105221] intel_rapl: Found RAPL domain core
[    9.105222] intel_rapl: Found RAPL domain uncore
[    9.111818] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    9.111821] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    9.111822] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[    9.111825] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[    9.177133] iTCO_vendor_support: vendor-support=0
[    9.180023] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    9.180087] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0560)
[    9.180199] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    9.181129] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    9.187865] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
[    9.203788] BTRFS info (device dm-2): enabling ssd optimizations
[    9.203793] BTRFS info (device dm-2): use zlib compression
[    9.203795] BTRFS info (device dm-2): disk space caching is enabled
[    9.203797] BTRFS info (device dm-2): has skinny extents
[    9.206806] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:d1:b5:ee
[    9.206815] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    9.206859] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    9.226895] media: Linux media interface: v0.10
[    9.243658] input: Wacom ISDv4 E6 Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:056A:00E6.0001/input/input8
[    9.244222] wacom 0003:056A:00E6.0001: hidraw0: USB HID v1.11 Device [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input0
[    9.244589] input: Wacom ISDv4 E6 Finger as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:056A:00E6.0002/input/input12
[    9.253935] wacom 0003:056A:00E6.0002: hidraw1: USB HID v1.11 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input1
[    9.255383] Linux video capture interface: v2.00
[    9.256241] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[    9.258058] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[    9.258402] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[    9.260531] usbcore: registered new interface driver cdc_acm
[    9.260533] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    9.266711] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[    9.268175] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[    9.268212] usbcore: registered new interface driver cdc_wdm
[    9.277853] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    9.320647] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
[    9.322077] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    9.322216] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[    9.322219] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[    9.322220] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[    9.322292] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input14
[    9.322358] usbcore: registered new interface driver uvcvideo
[    9.322359] USB Video Class driver (1.1.1)
[    9.337138] mousedev: PS/2 mouse device common for all mice
[    9.345904] [drm] Memory usable by graphics device = 2048M
[    9.345908] [drm] Replacing VGA console driver
[    9.346337] Console: switching to colour dummy device 80x25
[    9.364910] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[    9.365418] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[    9.365468] usbcore: registered new interface driver cdc_ncm
[    9.369406] usbcore: registered new interface driver cdc_mbim
[    9.374254] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[    9.385801] Bluetooth: Core ver 2.22
[    9.385819] NET: Registered protocol family 31
[    9.385820] Bluetooth: HCI device and connection manager initialized
[    9.385824] Bluetooth: HCI socket layer initialized
[    9.385827] Bluetooth: L2CAP socket layer initialized
[    9.385834] Bluetooth: SCO socket layer initialized
[    9.395641] usbcore: registered new interface driver btusb
[    9.403494] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    9.403496] [drm] Driver supports precise vblank timestamp query.
[    9.403863] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    9.467173] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[    9.467398] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    9.469019] acpi device:03: registered as cooling_device6
[    9.469083] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15
[    9.469239] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    9.532523] random: crng init done
[    9.663609] fbcon: inteldrmfb (fb0) is primary device
[    9.837288] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    9.837289] Bluetooth: BNEP filters: protocol multicast
[    9.837293] Bluetooth: BNEP socket layer initialized
[    9.860083] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
[    9.860560] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[    9.860562] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.860563] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[    9.860564] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[    9.860565] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[    9.860568] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x23
[    9.860569] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x1b
[    9.860570] snd_hda_codec_conexant hdaudioC0D0:      Dock Mic=0x1a
[    9.861879] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[    9.879542] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    9.879825] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    9.879882] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[    9.879939] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[    9.879993] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[    9.880104] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[    9.880164] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[    9.880220] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[    9.899976] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[    9.988945] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00/0x0, board id: 1611, fw id: 774180
[    9.988953] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[   10.048769] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   10.403311] Console: switching to colour frame buffer device 170x48
[   10.421983] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   10.889779] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   10.909646] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   11.150276] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   11.154452] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   11.160419] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   11.182813] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input24
[   11.448769] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   11.529084] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   11.549103] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   11.846979] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   11.940757] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   12.009159] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   12.173109] fuse init (API version 7.26)
[   15.169399] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   15.466994] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   15.554381] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   18.712938] wlp2s0: authenticate with f0:5c:19:80:28:f0
[   18.715420] wlp2s0: send auth to f0:5c:19:80:28:f0 (try 1/3)
[   18.731903] wlp2s0: authenticated
[   18.733372] wlp2s0: associate with f0:5c:19:80:28:f0 (try 1/3)
[   18.733990] wlp2s0: RX AssocResp from f0:5c:19:80:28:f0 (capab=0x1011 status=0 aid=8)
[   18.751646] wlp2s0: associated
[   18.833714] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by f0:5c:19:80:28:f0
[   20.847091] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   21.182544] Bluetooth: RFCOMM TTY layer initialized
[   21.182556] Bluetooth: RFCOMM socket layer initialized
[   21.182562] Bluetooth: RFCOMM ver 1.11
[   26.687558] tun: Universal TUN/TAP device driver, 1.6
[  124.853081] pciehp 0000:00:1c.3:pcie004: Slot(0): Card present
[  124.853213] pciehp 0000:00:1c.3:pcie004: Slot(0): Link Up
[  124.853220] pciehp 0000:00:1c.3:pcie004: Slot(0): Link Up event ignored; already powering on
[  124.973436] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[  124.973518] pci 0000:03:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[  124.973771] pci 0000:03:00.0: PME# supported from D3hot
[  124.983433] pci 0000:03:00.0: BAR 0: assigned [mem 0xf0800000-0xf0807fff 64bit]
[  124.983455] pcieport 0000:00:1c.3: PCI bridge to [bus 03]
[  124.983459] pcieport 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[  124.983465] pcieport 0000:00:1c.3:   bridge window [mem 0xf0800000-0xf0ffffff]
[  124.983471] pcieport 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[  124.983491] pci 0000:03:00.0: enabling device (0000 -> 0002)
[  124.998128] xhci_hcd 0000:03:00.0: xHCI Host Controller
[  124.998134] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[  125.005152] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[  125.005489] hub 3-0:1.0: USB hub found
[  125.005499] hub 3-0:1.0: 2 ports detected
[  125.005599] xhci_hcd 0000:03:00.0: xHCI Host Controller
[  125.005603] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[  125.005628] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[  125.005729] hub 4-0:1.0: USB hub found
[  125.005737] hub 4-0:1.0: 2 ports detected
[  147.933608] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[  147.987900] usb-storage 4-2:1.0: USB Mass Storage device detected
[  147.988259] scsi host6: usb-storage 4-2:1.0
[  147.988367] usbcore: registered new interface driver usb-storage
[  147.992316] usbcore: registered new interface driver uas
[  149.010335] scsi 6:0:0:0: Direct-Access     Innostor Innostor         1.00 PQ: 0 ANSI: 6
[  149.011050] sd 6:0:0:0: [sdb] 30720000 512-byte logical blocks: (15.7 GB/14.6 GiB)
[  149.011192] sd 6:0:0:0: [sdb] Write Protect is off
[  149.011196] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[  149.011347] sd 6:0:0:0: [sdb] No Caching mode page found
[  149.011358] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  149.012891]  sdb: sdb1
[  149.016859] sd 6:0:0:0: [sdb] Attached SCSI removable disk
