[    0.000000] Linux version 4.10.0-22-generic (buildd@lcy01-08) (gcc version 6.3.0 20170406 (Ubuntu 6.3.0-12ubuntu2) ) #24-Ubuntu SMP Mon May 22 17:43:20 UTC 2017 (Ubuntu 4.10.0-22.24-generic 4.10.15)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-22-generic root=UUID=d04f47bc-4f75-4b9f-8275-c0bdd2eac20f ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff23fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ff24000-0x00000000829fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027b5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 4242RW9/4242RW9, BIOS CBET4000 4.6-344-g37afb270b4-dirty 06/08/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x27b600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 080000000 mask FC0000000 uncachable
[    0.000000]   1 base 0C0000000 mask FE0000000 uncachable
[    0.000000]   2 base 0E0000000 mask FF0000000 write-combining
[    0.000000]   3 base 0F0000000 mask FF0000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x7ff24 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff98fd40099000] 99000 size 24576
[    0.000000] BRK [0x1e6e28000, 0x1e6e28fff] PGTABLE
[    0.000000] BRK [0x1e6e29000, 0x1e6e29fff] PGTABLE
[    0.000000] BRK [0x1e6e2a000, 0x1e6e2afff] PGTABLE
[    0.000000] BRK [0x1e6e2b000, 0x1e6e2bfff] PGTABLE
[    0.000000] BRK [0x1e6e2c000, 0x1e6e2cfff] PGTABLE
[    0.000000] BRK [0x1e6e2d000, 0x1e6e2dfff] PGTABLE
[    0.000000] BRK [0x1e6e2e000, 0x1e6e2efff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32dcd000-0x356ddfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F08B0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x000000007FF3C0E0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x000000007FF3F790 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x000000007FF3C280 00350A (v02 COREv4 COREBOOT 20110725 INTL 20161222)
[    0.000000] ACPI: FACS 0x000000007FF3C240 000040
[    0.000000] ACPI: FACS 0x000000007FF3C240 000040
[    0.000000] ACPI: SSDT 0x000000007FF3F890 001733 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: MCFG 0x000000007FF40FD0 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: TCPA 0x000000007FF41010 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x000000007FF41050 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DMAR 0x000000007FF410C0 0000A8 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x000000007FF41170 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000027b5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x27b5d0000-0x27b5fafff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027b5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007ff23fff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000027b5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027b5fffff]
[    0.000000] On node 0 totalpages: 2077890
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8125 pages used for memmap
[    0.000000]   DMA32 zone: 519972 pages, LIFO batch:31
[    0.000000]   Normal zone: 24280 pages used for memmap
[    0.000000]   Normal zone: 1553920 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x0000000080a00000-0x00000000829fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ff24000-0x829fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x82a00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[    0.000000] e820: [mem 0x82a00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff98ffbb200000 s107992 r8192 d31272 u524288
[    0.000000] pcpu-alloc: s107992 r8192 d31272 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2045400
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-22-generic root=UUID=d04f47bc-4f75-4b9f-8275-c0bdd2eac20f ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8050884K/8311560K available (9082K kernel code, 1666K rwdata, 3816K rodata, 2228K init, 2364K bss, 260676K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:524544 nr_irqs:456 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2591.717 MHz processor
[    0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 5183.43 BogoMIPS (lpj=10366868)
[    0.000027] pid_max: default: 32768 minimum: 301
[    0.000035] ACPI: Core revision 20160930
[    0.002336] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.002360] Security Framework initialized
[    0.002361] Yama: becoming mindful.
[    0.002374] AppArmor: AppArmor initialized
[    0.002776] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.004625] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.005477] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.005485] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.005705] CPU: Physical Processor ID: 0
[    0.005706] CPU: Processor Core ID: 0
[    0.005712] mce: CPU supports 7 MCE banks
[    0.005720] CPU0: Thermal monitoring enabled (TM1)
[    0.005727] process: using mwait in idle threads
[    0.005730] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.005731] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.005843] Freeing SMP alternatives memory: 32K
[    0.006805] ftrace: allocating 34178 entries in 134 pages
[    0.020974] smpboot: Max logical packages: 2
[    0.020985] DMAR: Host address width 36
[    0.020987] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.020992] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.020992] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.020995] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.020996] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.020997] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.020998] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.021286] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.021287] x2apic enabled
[    0.021293] Switched APIC routing to cluster x2apic.
[    0.021748] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.061438] TSC deadline timer enabled
[    0.061441] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.061500] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.061520] ... version:                3
[    0.061520] ... bit width:              48
[    0.061520] ... generic registers:      4
[    0.061521] ... value mask:             0000ffffffffffff
[    0.061521] ... max period:             00007fffffffffff
[    0.061522] ... fixed-purpose events:   3
[    0.061522] ... event mask:             000000070000000f
[    0.062244] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.062259] smp: Bringing up secondary CPUs ...
[    0.062328] x86: Booting SMP configuration:
[    0.062329] .... node  #0, CPUs:      #1 #2 #3
[    0.069459] smp: Brought up 1 node, 4 CPUs
[    0.069461] smpboot: Total of 4 processors activated (20733.73 BogoMIPS)
[    0.072521] devtmpfs: initialized
[    0.072573] x86/mm: Memory block size: 128MB
[    0.074874] evm: security.selinux
[    0.074875] evm: security.SMACK64
[    0.074875] evm: security.SMACK64EXEC
[    0.074875] evm: security.SMACK64TRANSMUTE
[    0.074876] evm: security.SMACK64MMAP
[    0.074876] evm: security.ima
[    0.074876] evm: security.capability
[    0.074983] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.074992] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.075031] pinctrl core: initialized pinctrl subsystem
[    0.075127] RTC time:  4:46:38, date: 06/09/17
[    0.075203] NET: Registered protocol family 16
[    0.088189] cpuidle: using governor ladder
[    0.104195] cpuidle: using governor menu
[    0.104198] PCCT header not found.
[    0.104259] ACPI: bus type PCI registered
[    0.104260] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.104318] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.104349] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.104354] PCI: Using configuration type 1 for base access
[    0.104393] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.120348] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.120543] ACPI: Added _OSI(Module Device)
[    0.120543] ACPI: Added _OSI(Processor Device)
[    0.120544] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.120545] ACPI: Added _OSI(Processor Aggregator Device)
[    0.120661] ACPI: Executed 1 blocks of module-level executable AML code
[    0.122438] ACPI : EC: EC started
[    0.122438] ACPI : EC: interrupt blocked
[    0.122483] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.122485] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.122486] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.122486] ACPI: Interpreter enabled
[    0.122502] ACPI: (supports S0 S3 S4 S5)
[    0.122503] ACPI: Using IOAPIC for interrupt routing
[    0.122520] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.128915] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.128918] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.128957] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.128965] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.129005] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
[    0.129131] PCI host bridge to bus 0000:00
[    0.129133] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.129134] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.129135] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.129136] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.129136] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.129137] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.129138] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.129139] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.129140] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.129141] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.129142] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.129143] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.129144] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.129145] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.129145] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.129146] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xf7ffffff window]
[    0.129147] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.129149] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.129155] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.129234] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.129261] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.129318] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.129327] pci 0000:00:02.0: reg 0x10: [mem 0xf1400000-0xf17fffff 64bit]
[    0.129332] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.129337] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.129404] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[    0.129412] pci 0000:00:04.0: reg 0x10: [mem 0xf1920000-0xf1927fff 64bit]
[    0.129500] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.129519] pci 0000:00:16.0: reg 0x10: [mem 0xf1932000-0xf193200f 64bit]
[    0.129590] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.129655] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.129670] pci 0000:00:19.0: reg 0x10: [mem 0xf1900000-0xf191ffff]
[    0.129678] pci 0000:00:19.0: reg 0x14: [mem 0xf192c000-0xf192cfff]
[    0.129686] pci 0000:00:19.0: reg 0x18: [io  0x3040-0x305f]
[    0.129744] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.129802] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.129819] pci 0000:00:1a.0: reg 0x10: [mem 0xf192f000-0xf192f3ff]
[    0.129900] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.129933] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.129966] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.129982] pci 0000:00:1b.0: reg 0x10: [mem 0xf1928000-0xf192bfff 64bit]
[    0.130052] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.130088] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.130119] pci 0000:00:1c.0: [8086:1c12] type 01 class 0x060400
[    0.130191] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.130257] pci 0000:00:1c.1: [8086:1c16] type 01 class 0x060400
[    0.130322] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.130392] pci 0000:00:1c.3: [8086:1c18] type 01 class 0x060400
[    0.130515] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.130593] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.130610] pci 0000:00:1d.0: reg 0x10: [mem 0xf1930000-0xf19303ff]
[    0.130693] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.130724] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.130757] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[    0.130912] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.130928] pci 0000:00:1f.2: reg 0x10: [io  0x3080-0x3087]
[    0.130936] pci 0000:00:1f.2: reg 0x14: [io  0x3090-0x3093]
[    0.130944] pci 0000:00:1f.2: reg 0x18: [io  0x3088-0x308f]
[    0.130952] pci 0000:00:1f.2: reg 0x1c: [io  0x3094-0x3097]
[    0.130960] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.130969] pci 0000:00:1f.2: reg 0x24: [mem 0xf192e000-0xf192e7ff]
[    0.131011] pci 0000:00:1f.2: PME# supported from D3hot
[    0.131070] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.131086] pci 0000:00:1f.3: reg 0x10: [mem 0xf1931000-0xf19310ff 64bit]
[    0.131105] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.131181] pci 0000:00:1f.6: [8086:1c24] type 00 class 0x118000
[    0.131200] pci 0000:00:1f.6: reg 0x10: [mem 0xf192d000-0xf192dfff 64bit]
[    0.131325] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.131488] pci 0000:02:00.0: [8086:0085] type 00 class 0x028000
[    0.131614] pci 0000:02:00.0: reg 0x10: [mem 0xf1800000-0xf1801fff 64bit]
[    0.132146] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.144367] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.144373] pci 0000:00:1c.0:   bridge window [mem 0xf1800000-0xf18fffff]
[    0.144421] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.144535] pci 0000:04:00.0: [1180:e822] type 00 class 0x080501
[    0.144566] pci 0000:04:00.0: MMC controller base frequency changed to 50Mhz.
[    0.144604] pci 0000:04:00.0: reg 0x10: [mem 0xf0801000-0xf08010ff]
[    0.144905] pci 0000:04:00.0: supports D1 D2
[    0.144906] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.145044] pci 0000:04:00.1: [1180:e232] type 00 class 0x088000
[    0.145088] pci 0000:04:00.1: reg 0x10: [mem 0xf0802000-0xf08020ff]
[    0.145367] pci 0000:04:00.1: supports D1 D2
[    0.145368] pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.145485] pci 0000:04:00.3: [1180:e832] type 00 class 0x0c0010
[    0.145528] pci 0000:04:00.3: reg 0x10: [mem 0xf0800000-0xf08007ff]
[    0.145688] pci 0000:04:00.3: Enabling fixed DMA alias to 00.0
[    0.145811] pci 0000:04:00.3: supports D1 D2
[    0.145812] pci 0000:04:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.156324] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.156328] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.156332] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf08fffff]
[    0.156340] pci 0000:00:1c.3:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.156441] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.156481] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.156519] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.156556] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.156593] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.156629] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.156665] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.156705] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.157796] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.157886] ACPI : EC: interrupt unblocked
[    0.157892] ACPI : EC: event unblocked
[    0.157897] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.157898] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.158091] SCSI subsystem initialized
[    0.158124] libata version 3.00 loaded.
[    0.158154] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.158156] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.158159] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.158159] vgaarb: loaded
[    0.158175] ACPI: bus type USB registered
[    0.158188] usbcore: registered new interface driver usbfs
[    0.158194] usbcore: registered new interface driver hub
[    0.158206] usbcore: registered new device driver usb
[    0.158300] PCI: Using ACPI for IRQ routing
[    0.159785] PCI: pci_cache_line_size set to 64 bytes
[    0.159909] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.159910] e820: reserve RAM buffer [mem 0x7ff24000-0x7fffffff]
[    0.159910] e820: reserve RAM buffer [mem 0x27b600000-0x27bffffff]
[    0.159989] NetLabel: Initializing
[    0.159989] NetLabel:  domain hash size = 128
[    0.159990] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.160003] NetLabel:  unlabeled traffic allowed by default
[    0.160081] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.160085] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.162107] clocksource: Switched to clocksource hpet
[    0.168642] VFS: Disk quotas dquot_6.6.0
[    0.168659] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.168743] AppArmor: AppArmor Filesystem Enabled
[    0.168789] pnp: PnP ACPI init
[    0.168883] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.168884] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.168885] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.168886] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.168888] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.168889] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.168890] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.168891] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.168892] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[    0.168893] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[    0.168897] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.169388] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.169391] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.169425] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.169426] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.169428] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.169445] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.169473] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.169496] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.169513] pnp: PnP ACPI: found 6 devices
[    0.175597] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.175633] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.175639] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.175644] pci 0000:00:1c.0:   bridge window [mem 0xf1800000-0xf18fffff]
[    0.175652] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.175662] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.175665] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.175671] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf08fffff]
[    0.175676] pci 0000:00:1c.3:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.175685] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.175686] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.175687] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.175688] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.175689] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.175690] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.175691] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.175692] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.175693] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.175694] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.175695] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.175696] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.175697] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.175698] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.175699] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.175700] pci_bus 0000:00: resource 19 [mem 0x82a00000-0xf7ffffff window]
[    0.175701] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[    0.175702] pci_bus 0000:02: resource 1 [mem 0xf1800000-0xf18fffff]
[    0.175703] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.175704] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf08fffff]
[    0.175705] pci_bus 0000:04: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.175763] NET: Registered protocol family 2
[    0.175899] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.176011] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.176133] TCP: Hash tables configured (established 65536 bind 65536)
[    0.176154] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.176175] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.176220] NET: Registered protocol family 1
[    0.176233] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.176728] PCI: CLS 64 bytes, default 64
[    0.176770] Unpacking initramfs...
[    0.757458] Freeing initrd memory: 42052K
[    0.757487] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.757489] software IO TLB [mem 0x7bf24000-0x7ff24000] (64MB) mapped at [ffff98fdbbf24000-ffff98fdbff23fff]
[    0.757700] Scanning for low memory corruption every 60 seconds
[    0.757951] audit: initializing netlink subsys (disabled)
[    0.757984] audit: type=2000 audit(1496983598.756:1): initialized
[    0.758349] Initialise system trusted keyrings
[    0.758414] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.759610] zbud: loaded
[    0.759992] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.760156] fuse init (API version 7.26)
[    0.761204] Key type asymmetric registered
[    0.761205] Asymmetric key parser 'x509' registered
[    0.761232] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.761257] io scheduler noop registered
[    0.761258] io scheduler deadline registered
[    0.761264] io scheduler cfq registered (default)
[    0.761972] pcieport 0000:00:01.0: Signaling PME with IRQ 26
[    0.761993] pcieport 0000:00:1c.0: Signaling PME with IRQ 27
[    0.762011] pcieport 0000:00:1c.1: Signaling PME with IRQ 28
[    0.762033] pcieport 0000:00:1c.3: Signaling PME with IRQ 29
[    0.762054] pciehp 0000:00:1c.3:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.762118] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[    0.762118] vesafb: scrolling: redraw
[    0.762119] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.762129] vesafb: framebuffer at 0xe0000000, mapped to 0xffffbcf601800000, using 8128k, total 8128k
[    0.762217] Console: switching to colour frame buffer device 240x67
[    0.762243] fb0: VESA VGA frame buffer device
[    0.762254] intel_idle: MWAIT substates: 0x21120
[    0.762254] intel_idle: v0.4.1 model 0x3A
[    0.762405] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.762550] ACPI: AC Adapter [AC] (on-line)
[    0.762598] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input0
[    0.762601] ACPI: Sleep Button [SLPB]
[    0.762734] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input1
[    0.762742] ACPI: Lid Switch [LID]
[    0.762774] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.762775] ACPI: Power Button [PWRF]
[    0.763584] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.763790] thermal LNXTHERM:00: registered as thermal_zone0
[    0.763790] ACPI: Thermal Zone [THM0] (37 C)
[    0.764421] thermal LNXTHERM:01: registered as thermal_zone1
[    0.764422] ACPI: Thermal Zone [THM1] (27 C)
[    0.764438] GHES: HEST is not enabled!
[    0.764500] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.765892] Linux agpgart interface v0.103
[    0.767393] loop: module loaded
[    0.767534] libphy: Fixed MDIO Bus: probed
[    0.767534] tun: Universal TUN/TAP device driver, 1.6
[    0.767535] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.767566] PPP generic driver version 2.4.2
[    0.767601] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.767603] ehci-pci: EHCI PCI platform driver
[    0.767711] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.767716] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.767727] ehci-pci 0000:00:1a.0: debug port 2
[    0.771617] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.771635] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf192f000
[    0.776923] ACPI: Battery Slot [BAT0] (battery present)
[    0.777071] ACPI: Battery Slot [BAT1] (battery absent)
[    0.786113] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.786170] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.786171] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.786172] usb usb1: Product: EHCI Host Controller
[    0.786173] usb usb1: Manufacturer: Linux 4.10.0-22-generic ehci_hcd
[    0.786174] usb usb1: SerialNumber: 0000:00:1a.0
[    0.786278] hub 1-0:1.0: USB hub found
[    0.786283] hub 1-0:1.0: 3 ports detected
[    0.786496] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.786500] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.786510] ehci-pci 0000:00:1d.0: debug port 2
[    0.790415] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.790428] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf1930000
[    0.806113] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.806164] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.806165] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.806166] usb usb2: Product: EHCI Host Controller
[    0.806167] usb usb2: Manufacturer: Linux 4.10.0-22-generic ehci_hcd
[    0.806168] usb usb2: SerialNumber: 0000:00:1d.0
[    0.806273] hub 2-0:1.0: USB hub found
[    0.806277] hub 2-0:1.0: 3 ports detected
[    0.806387] ehci-platform: EHCI generic platform driver
[    0.806395] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.806397] ohci-pci: OHCI PCI platform driver
[    0.806404] ohci-platform: OHCI generic platform driver
[    0.806410] uhci_hcd: USB Universal Host Controller Interface driver
[    0.806454] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.812765] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.812771] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.812887] mousedev: PS/2 mouse device common for all mice
[    0.813043] rtc_cmos 00:03: RTC can wake from S4
[    0.813160] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.813189] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.813194] i2c /dev entries driver
[    0.813241] device-mapper: uevent: version 1.0.3
[    0.813297] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    0.813302] intel_pstate: Intel P-state driver initializing
[    0.813482] ledtrig-cpu: registered to indicate activity on CPUs
[    0.813825] NET: Registered protocol family 10
[    0.816749] Segment Routing with IPv6
[    0.816765] NET: Registered protocol family 17
[    0.816773] Key type dns_resolver registered
[    0.816904] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.817014] microcode: sig=0x306a9, pf=0x10, revision=0x1b
[    0.817055] microcode: Microcode Update Driver: v2.2.
[    0.817139] registered taskstats version 1
[    0.817147] Loading compiled-in X.509 certificates
[    0.818862] Loaded X.509 cert 'Build time autogenerated kernel key: a167cdd0c8d1eea96632c95731fa483a527957b7'
[    0.818877] zswap: loaded using pool lzo/zbud
[    0.827293] Key type big_key registered
[    0.827296] Key type trusted registered
[    0.828267] Key type encrypted registered
[    0.828269] AppArmor: AppArmor sha1 policy hashing enabled
[    0.828271] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.828285] evm: HMAC attrs: 0x1
[    0.828576]   Magic number: 5:333:767
[    0.828667] rtc_cmos 00:03: setting system clock to 2017-06-09 04:46:38 UTC (1496983598)
[    0.828705] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.828705] EDD information not available.
[    0.828725] PM: Hibernation image not present or could not be loaded.
[    0.830009] Freeing unused kernel memory: 2228K
[    0.830010] Write protecting the kernel read-only data: 14336k
[    0.830282] Freeing unused kernel memory: 1144K
[    0.830750] Freeing unused kernel memory: 280K
[    0.836394] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.844111] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.844165] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.844172] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.844605] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.844634] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.845522] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.845561] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.845574] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.845884] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.845924] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.863589] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
[    0.869713] pps_core: LinuxPPS API ver. 1 registered
[    0.869714] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.871106] PTP clock support registered
[    0.872008] sdhci: Secure Digital Host Controller Interface driver
[    0.872008] sdhci: Copyright(c) Pierre Ossman
[    0.873651] sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e822] (rev 8)
[    0.874290] mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA
[    0.875220] [drm] Initialized
[    0.875890] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    0.875891] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.875956] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.962142] firewire_ohci 0000:04:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    0.963643] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    1.049749] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:6e:27:38
[    1.049750] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.049809] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    1.049835] ahci 0000:00:1f.2: version 3.0
[    1.050033] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.050367] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    1.060175] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode
[    1.060176] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    1.060751] scsi host0: ahci
[    1.060934] scsi host1: ahci
[    1.061084] scsi host2: ahci
[    1.061192] scsi host3: ahci
[    1.061278] scsi host4: ahci
[    1.061346] scsi host5: ahci
[    1.061381] ata1: SATA max UDMA/133 abar m2048@0xf192e000 port 0xf192e100 irq 31
[    1.061383] ata2: SATA max UDMA/133 abar m2048@0xf192e000 port 0xf192e180 irq 31
[    1.061385] ata3: SATA max UDMA/133 abar m2048@0xf192e000 port 0xf192e200 irq 31
[    1.061388] ata4: SATA max UDMA/133 abar m2048@0xf192e000 port 0xf192e280 irq 31
[    1.061390] ata5: SATA max UDMA/133 abar m2048@0xf192e000 port 0xf192e300 irq 31
[    1.061390] ata6: DUMMY
[    1.061633] [drm] Memory usable by graphics device = 2048M
[    1.061634] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[    1.061635] fb: switching to inteldrmfb from VESA VGA
[    1.061655] Console: switching to colour dummy device 80x25
[    1.061713] [drm] Replacing VGA console driver
[    1.114171] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.118639] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.118640] [drm] Driver supports precise vblank timestamp query.
[    1.119809] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.134128] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.262709] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.262713] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.263083] hub 1-1:1.0: USB hub found
[    1.263177] hub 1-1:1.0: 6 ports detected
[    1.282433] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.282434] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.282934] hub 2-1:1.0: USB hub found
[    1.283179] hub 2-1:1.0: 8 ports detected
[    1.377050] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.377735] ata1.00: supports DRM functions and may not be fully accessible
[    1.377859] ata1.00: ATA-8: HITACHI HTS723225A7A365  OPAL, ECB6B80D, max UDMA/100
[    1.377861] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.378619] ata1.00: supports DRM functions and may not be fully accessible
[    1.378736] ata1.00: configured for UDMA/100
[    1.378951] scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS72322 B80D PQ: 0 ANSI: 5
[    1.405261] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.406281] acpi device:03: registered as cooling_device4
[    1.406347] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    1.406422] [drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
[    1.422420] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.422498] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    1.422507] sd 0:0:0:0: [sda] Write Protect is off
[    1.422509] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.422522] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.470304] firewire_core 0000:04:00.3: created device fw0: GUID 0000000000000000, S400
[    1.480782] ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt.
[    1.480787] ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt.
[    1.489886] random: fast init done
[    1.505946]  sda: [LDM] sda1
[    1.506298] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.550090] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[    1.570058] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[    1.608685] fbcon: inteldrmfb (fb0) is primary device
[    1.608770] Console: switching to colour frame buffer device 240x67
[    1.608805] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.663920] usb 1-1.2: New USB device found, idVendor=045e, idProduct=0040
[    1.663922] usb 1-1.2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[    1.663923] usb 1-1.2: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[    1.663924] usb 1-1.2: Manufacturer: Microsoft
[    1.666847] hidraw: raw HID events driver (C) Jiri Kosina
[    1.670485] usbcore: registered new interface driver usbhid
[    1.670486] usbhid: USB HID core driver
[    1.671701] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:045E:0040.0001/input/input7
[    1.671809] hid-generic 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.0-1.2/input0
[    1.680755] usb 2-1.1: New USB device found, idVendor=05c6, idProduct=6764
[    1.680756] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.680757] usb 2-1.1: Product: A0001
[    1.680758] usb 2-1.1: Manufacturer: OnePlus
[    1.680759] usb 2-1.1: SerialNumber: 8edec698
[    1.737085] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.739084] ata2.00: ATAPI: Optiarc DVD RW AD-7710H, 1.S0, max UDMA/100
[    1.741235] ata2.00: configured for UDMA/100
[    1.742081] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[    1.744452] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7710H  1.S0 PQ: 0 ANSI: 5
[    1.758071] tsc: Refined TSC clocksource calibration: 2591.586 MHz
[    1.758088] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255b2ff5835, max_idle_ns: 440795305512 ns
[    1.768026] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.768027] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.768155] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.768272] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.851849] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
[    1.851850] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.851851] usb 1-1.3: Product: Biometric Coprocessor
[    1.851852] usb 1-1.3: Manufacturer: UPEK
[    1.856486] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[    1.930125] usb 1-1.4: new full-speed USB device number 5 using ehci-pci
[    1.959823] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000/0x0, board id: 0, fw id: 578367
[    1.959832] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.025839] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.043701] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[    2.043703] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.043704] usb 1-1.4: Product: Broadcom Bluetooth Device
[    2.043704] usb 1-1.4: Manufacturer: Broadcom Corp
[    2.043705] usb 1-1.4: SerialNumber: CC52AFE25338
[    2.081454] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.081788] ata3.00: ATA-9: KingFast, 11.56.00, max UDMA/133
[    2.081789] ata3.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    2.082052] ata3.00: configured for UDMA/133
[    2.082261] scsi 2:0:0:0: Direct-Access     ATA      KingFast         6.00 PQ: 0 ANSI: 5
[    2.114392] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    2.114658] sd 2:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[    2.114708] sd 2:0:0:0: [sdb] Write Protect is off
[    2.114718] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.114810] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.115464]  sdb: sdb1
[    2.115751] sd 2:0:0:0: [sdb] Attached SCSI disk
[    2.126114] usb 1-1.6: new high-speed USB device number 6 using ehci-pci
[    2.241172] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217
[    2.241174] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.241175] usb 1-1.6: Product: Integrated Camera
[    2.241176] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[    2.429553] ata4: SATA link down (SStatus 0 SControl 300)
[    2.745296] ata5: SATA link down (SStatus 0 SControl 300)
[    2.786235] clocksource: Switched to clocksource tsc
[    2.902317] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    3.239353] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8
[    8.162982] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    8.372001] ip_tables: (C) 2000-2006 Netfilter Core Team
[    8.384363] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    8.384467] systemd[1]: Detected architecture x86-64.
[    8.384750] systemd[1]: Set hostname to <laptop-ThinkPad-T520>.
[    8.494361] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.494403] systemd[1]: Reached target Remote File Systems.
[    8.494507] systemd[1]: Created slice System Slice.
[    8.494575] systemd[1]: Created slice User and Session Slice.
[    8.494603] systemd[1]: Listening on Journal Socket.
[    8.495667] systemd[1]: Starting Load Kernel Modules...
[    8.495733] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.537407] lp: driver loaded but no devices found
[    8.540427] ppdev: user-space parallel port driver
[    8.823356] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[    8.833249] systemd-journald[264]: Received request to flush runtime journal from PID 1
[    8.887542] Adding 450216k swap on /swapfile.  Priority:-1 extents:2 across:458408k SSFS
[    8.952199] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160930/utaddress-247)
[    8.952205] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.952208] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160930/utaddress-247)
[    8.952211] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.952212] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160930/utaddress-247)
[    8.952215] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.952215] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160930/utaddress-247)
[    8.952218] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.952219] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.972427] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.987255] Non-volatile memory driver v1.3
[    9.012101] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    9.012102] thinkpad_acpi: http://ibm-acpi.sf.net/
[    9.012103] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-344-g37afb270b4-dirty, EC 8AHT33WW-3.20
[    9.012104] thinkpad_acpi: Lenovo ThinkPad T520, model 4242RW9
[    9.014040] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    9.014249] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[    9.014283] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    9.014283] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    9.017779] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    9.017866] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    9.019490] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
[    9.056138] Intel(R) Wireless WiFi driver for Linux
[    9.056139] Copyright(c) 2003- 2015 Intel Corporation
[    9.059063] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
[    9.059521] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[    9.059523] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.059524] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[    9.059525] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[    9.059525] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[    9.059527] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x23
[    9.059528] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x1b
[    9.059529] snd_hda_codec_conexant hdaudioC0D0:      Dock Mic=0x1a
[    9.060859] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[    9.075506] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    9.101738] Bluetooth: Core ver 2.22
[    9.101753] NET: Registered protocol family 31
[    9.101754] Bluetooth: HCI device and connection manager initialized
[    9.101757] Bluetooth: HCI socket layer initialized
[    9.101758] Bluetooth: L2CAP socket layer initialized
[    9.101764] Bluetooth: SCO socket layer initialized
[    9.108135] media: Linux media interface: v0.10
[    9.119752] Linux video capture interface: v2.00
[    9.119756] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    9.119758] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[    9.119759] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[    9.119761] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[    9.121700] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[    9.127949] audit: type=1400 audit(1496983606.793:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=466 comm="apparmor_parser"
[    9.127951] audit: type=1400 audit(1496983606.793:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=466 comm="apparmor_parser"
[    9.128682] usbcore: registered new interface driver btusb
[    9.141074] audit: type=1400 audit(1496983606.805:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=463 comm="apparmor_parser"
[    9.141077] audit: type=1400 audit(1496983606.805:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=463 comm="apparmor_parser"
[    9.141078] audit: type=1400 audit(1496983606.805:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=463 comm="apparmor_parser"
[    9.141079] audit: type=1400 audit(1496983606.805:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=463 comm="apparmor_parser"
[    9.141459] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    9.141460] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    9.141461] RAPL PMU: hw unit of domain package 2^-16 Joules
[    9.141462] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    9.145850] audit: type=1400 audit(1496983606.809:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=462 comm="apparmor_parser"
[    9.145852] audit: type=1400 audit(1496983606.809:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=462 comm="apparmor_parser"
[    9.147236] audit: type=1400 audit(1496983606.813:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=471 comm="apparmor_parser"
[    9.147238] audit: type=1400 audit(1496983606.813:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=471 comm="apparmor_parser"
[    9.159499] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    9.164064] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
[    9.166110] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[    9.166113] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[    9.166114] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[    9.166826] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input14
[    9.166896] usbcore: registered new interface driver uvcvideo
[    9.166897] USB Video Class driver (1.1.1)
[    9.177803] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    9.191436] AVX version of gcm_enc/dec engaged.
[    9.191438] AES CTR mode by8 optimization enabled
[    9.193620] random: crng init done
[    9.194841] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    9.194914] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    9.194972] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    9.195042] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    9.195101] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    9.195156] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    9.195215] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    9.404352] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    9.439662] intel_rapl: Found RAPL domain package
[    9.439663] intel_rapl: Found RAPL domain core
[    9.439664] intel_rapl: Found RAPL domain uncore
[    9.577736] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    9.577737] Bluetooth: BNEP filters: protocol multicast
[    9.577741] Bluetooth: BNEP socket layer initialized
[    9.801401] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   10.017971] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   10.021408] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   10.023487] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[   10.023654] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[   10.023741] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   10.301633] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[   10.301794] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[   10.301882] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   10.382521] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   10.389577] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[   10.389748] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[   10.389834] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   10.667330] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[   10.667497] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[   10.667587] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   10.750970] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   10.814860] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   14.575001] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[   14.575161] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[   14.575248] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   14.855090] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[   14.855259] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[   14.855350] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   14.938276] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   14.994317] wlp2s0: authenticate with 98:de:d0:2b:a8:08
[   14.996898] wlp2s0: send auth to 98:de:d0:2b:a8:08 (try 1/3)
[   14.999058] wlp2s0: authenticated
[   15.001592] wlp2s0: associate with 98:de:d0:2b:a8:08 (try 1/3)
[   15.005407] wlp2s0: RX AssocResp from 98:de:d0:2b:a8:08 (capab=0x1431 status=0 aid=2)
[   15.007610] wlp2s0: associated
[   15.007651] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
