[NOTE ]  coreboot-4.20-521-g0a810a2881 Fri Jun 30 19:29:06 UTC 2023 x86_32 bootblock starting (log level: 7)...
[DEBUG]  FMAP: Found "FLASH" version 1.1 at 0x850000.
[DEBUG]  FMAP: base = 0xff400000 size = 0xc00000 #areas = 5
[DEBUG]  FMAP: area COREBOOT found @ 850200 (3866112 bytes)
[INFO ]  CBFS: mcache @0xff7c2e00 built for 16 files, used 0x378 of 0x4000 bytes
[WARN ]  CBFS: 'coreboot-stages' not found.
[INFO ]  CBFS: Found 'fallback/romstage' @0x80 size 0xc3c8 in mcache @0xff7c2e2c
[DEBUG]  BS: bootblock times (exec / console): total (unknown) / 0 ms


[NOTE ]  coreboot-4.20-521-g0a810a2881 Fri Jun 30 19:29:06 UTC 2023 x86_32 romstage starting (log level: 7)...
[DEBUG]  Disabling Watchdog reboot... done.
[DEBUG]  SMBus controller enabled
[DEBUG]  Setting up static northbridge registers... done.
[DEBUG]  Started PEG11 link training.
[DEBUG]  Temporarily hiding PEG11.
[DEBUG]  Started PEG10 link training.
[DEBUG]  Temporarily hiding PEG10.
[DEBUG]  Initializing IGD...
[DEBUG]  Back from haswell_early_initialization()
[DEBUG]  CPU id(306c3) ucode:00000028 Intel(R) Core(TM) i7-4600M CPU @ 2.90GHz
[DEBUG]  AES supported, TXT supported, VT supported
[DEBUG]  PCH type: QM87, device id: 8c4f, rev id 5
[DEBUG]  Starting UEFI PEI System Agent
[DEBUG]  FMAP: area RW_MRC_CACHE found @ 800000 (65536 bytes)
[NOTE ]  MRC: no data in 'RW_MRC_CACHE'
[INFO ]  CBFS: Found 'mrc.bin' @0x34fdc0 size 0x2e6e4 in mcache @0xff7c30f4
System Agent: Starting up...
System Agent: Initializing PCH
install_ppi: overwrite GUID {ed097352-9041-445a-80b6-b29d509e8845}
install_ppi: overwrite GUID {908c7f8b-5c48-47fb-8357-f5fd4e235276}
System Agent: Initializing PCH (SMBUS)
System Agent: Initializing PCH (USB)
System Agent: Initializing PCH (SA Init)
System Agent: Initializing PCH (Me UMA)
System Agent: Initializing Memory
System Agent: Done.
Sanity checking heap.
[DEBUG]  MRC Version 1.6.1 Build 2
[DEBUG]  memcfg DDR3 clock 1600 MHz
[DEBUG]  memcfg channel assignment: A: 0, B  1, C  2
[DEBUG]  memcfg channel[0] config (00620020):
[DEBUG]     ECC inactive
[DEBUG]     enhanced interleave mode on
[DEBUG]     rank interleave on
[DEBUG]     DIMMA 8192 MB width x8 or x32 dual rank, selected
[DEBUG]     DIMMB 0 MB width x8 or x32 single rank
[DEBUG]  memcfg channel[1] config (00620020):
[DEBUG]     ECC inactive
[DEBUG]     enhanced interleave mode on
[DEBUG]     rank interleave on
[DEBUG]     DIMMA 8192 MB width x8 or x32 dual rank, selected
[DEBUG]     DIMMB 0 MB width x8 or x32 single rank
[DEBUG]  ME: FW Partition Table      : OK
[DEBUG]  ME: Bringup Loader Failure  : NO
[DEBUG]  ME: Firmware Init Complete  : NO
[DEBUG]  ME: Manufacturing Mode      : YES
[DEBUG]  ME: Boot Options Present    : NO
[DEBUG]  ME: Update In Progress      : NO
[DEBUG]  ME: Current Working State   : Initializing
[DEBUG]  ME: Current Operation State : Bring up
[DEBUG]  ME: Current Operation Mode  : Debug
[DEBUG]  ME: Error Code              : No Error
[DEBUG]  ME: Progress Phase          : BUP Phase
[DEBUG]  ME: Power Management Event  : Clean Moff->Mx wake
[DEBUG]  ME: Progress Phase State    : 0x4d
[DEBUG]  CBMEM:
[DEBUG]  IMD: root @ 0x7f7ff000 254 entries.
[DEBUG]  IMD: root @ 0x7f7fec00 62 entries.
[DEBUG]  External stage cache:
[DEBUG]  IMD: root @ 0x7fbff000 254 entries.
[DEBUG]  IMD: root @ 0x7fbfec00 62 entries.
[DEBUG]  FMAP: area RW_MRC_CACHE found @ 800000 (65536 bytes)
[DEBUG]  MRC: Checking cached data update for 'RW_MRC_CACHE'.
[DEBUG]  flash size 0x2800000 bytes
[INFO ]  SF: Detected 00 0000 with sector size 0x1000, total 0x2800000
[ERROR]  SF size 0x2800000 does not correspond to CONFIG_ROM_SIZE 0xc00000!!
[NOTE ]  MRC: no data in 'RW_MRC_CACHE'
[DEBUG]  MRC: cache data 'RW_MRC_CACHE' needs update.
[DEBUG]  SF: Successfully written 2 bytes @ 0x800000
[DEBUG]  SF: Successfully written 2 bytes @ 0x800002
[DEBUG]  SF: Successfully written 20 bytes @ 0x800020
[DEBUG]  SF: Successfully written 4052 bytes @ 0x800034
[DEBUG]  MRC: updated 'RW_MRC_CACHE'.
[DEBUG]  Unhiding PEG10.
[DEBUG]  Unhiding PEG11.
[DEBUG]  SMM Memory Map
[DEBUG]  SMRAM       : 0x7f800000 0x800000
[DEBUG]   Subregion 0: 0x7f800000 0x300000
[DEBUG]   Subregion 1: 0x7fb00000 0x100000
[DEBUG]   Subregion 2: 0x7fc00000 0x400000
[DEBUG]  Normal boot
[INFO ]  CBFS: Found 'fallback/postcar' @0x3f0c0 size 0x5afc in mcache @0xff7c3084
[DEBUG]  Loading module at 0x7f7cf000 with entry 0x7f7cf031. filesize: 0x5720 memsize: 0xba58
[DEBUG]  Processing 231 relocs. Offset value of 0x7d7cf000
[DEBUG]  BS: romstage times (exec / console): total (unknown) / 1 ms


[NOTE ]  coreboot-4.20-521-g0a810a2881 Fri Jun 30 19:29:06 UTC 2023 x86_32 postcar starting (log level: 7)...
[DEBUG]  Normal boot
[INFO ]  CBFS: Found 'fallback/ramstage' @0x1be00 size 0x1ddd6 in mcache @0x7f7dd10c
[DEBUG]  Loading module at 0x7f781000 with entry 0x7f781000. filesize: 0x3bac0 memsize: 0x4cc30
[DEBUG]  Processing 4086 relocs. Offset value of 0x7b781000
[DEBUG]  BS: postcar times (exec / console): total (unknown) / 0 ms


[NOTE ]  coreboot-4.20-521-g0a810a2881 Fri Jun 30 19:29:06 UTC 2023 x86_32 ramstage starting (log level: 7)...
[DEBUG]  Normal boot
[INFO ]  Enumerating buses...
[DEBUG]  Root Device scanning...
[DEBUG]  CPU_CLUSTER: 0 enabled
[DEBUG]  DOMAIN: 0000 enabled
[DEBUG]  DOMAIN: 0000 scanning...
[DEBUG]  PCI: pci_scan_bus for bus 00
[DEBUG]  PCI: 00:00.0 [8086/0c04] enabled
[INFO ]  PCI: Static device PCI: 00:01.0 not found, disabling it.
[DEBUG]  PCI: 00:01.1 [8086/0c05] enabled
[DEBUG]  PCI: 00:02.0 [8086/0416] enabled
[DEBUG]  PCI: 00:03.0 [8086/0c0c] enabled
[DEBUG]  PCI: 00:04.0 [8086/0c03] enabled
[DEBUG]  PCI: 00:14.0 [8086/8c31] enabled
[DEBUG]  PCI: 00:16.0 [8086/8c3a] enabled
[DEBUG]  PCI: 00:16.1: Disabling device
[DEBUG]  PCI: 00:16.2: Disabling device
[DEBUG]  PCI: 00:16.3: Disabling device
[DEBUG]  PCI: 00:19.0 [8086/1502] enabled
[DEBUG]  PCI: 00:1a.0 [8086/8c2d] enabled
[DEBUG]  PCI: 00:1b.0 [8086/8c20] enabled
[DEBUG]  PCIe Root Port 1 ASPM is disabled
[DEBUG]  PCI: 00:1c.0 [8086/8c10] enabled
[DEBUG]  PCIe Root Port 2 ASPM is disabled
[DEBUG]  PCI: 00:1c.1 [8086/8c12] enabled
[DEBUG]  PCI: 00:1c.2 [8086/8c14] disabled
[DEBUG]  PCI: 00:1c.3 [8086/8c16] disabled
[DEBUG]  Adjusted number of PCIe root ports to 5 as per strpfusecfg2
[DEBUG]  PCI: 00:1c.2: Disabling device
[DEBUG]  PCI: 00:1c.3: Disabling device
[DEBUG]  PCI: 00:1c.4: Disabling device
[DEBUG]  PCI: 00:1c.4 [8086/8c18] disabled
[DEBUG]  PCI: 00:1d.0 [8086/8c26] enabled
[DEBUG]  PCI: 00:1f.0 [8086/8c4f] enabled
[DEBUG]  PCI: 00:1f.2 [8086/8c03] enabled
[DEBUG]  PCI: 00:1f.3 [8086/8c22] enabled
[DEBUG]  PCI: 00:1f.5: Disabling device
[DEBUG]  PCI: 00:1f.6: Disabling device
[WARN ]  PCI: Leftover static devices:
[WARN ]  PCI: 00:01.0
[WARN ]  PCI: 00:16.1
[WARN ]  PCI: 00:16.2
[WARN ]  PCI: 00:16.3
[WARN ]  PCI: 00:1c.5
[WARN ]  PCI: 00:1c.6
[WARN ]  PCI: 00:1c.7
[WARN ]  PCI: 00:1f.5
[WARN ]  PCI: 00:1f.6
[WARN ]  PCI: Check your devicetree.cb.
[DEBUG]  PCI: 00:01.1 scanning...
[DEBUG]  PCI: pci_scan_bus for bus 01
[DEBUG]  scan_bus: bus PCI: 00:01.1 finished in 0 msecs
[DEBUG]  PCI: 00:1c.0 scanning...
[DEBUG]  PCI: pci_scan_bus for bus 02
[DEBUG]  PCI: 02:00.0 [10ec/5227] enabled
[INFO ]  Enabling Common Clock Configuration
[INFO ]  ASPM: Enabled L0s and L1
[INFO ]  PCIe: Max_Payload_Size adjusted to 128
[INFO ]  PCI: 02:00.0: Enabled LTR
[DEBUG]  scan_bus: bus PCI: 00:1c.0 finished in 0 msecs
[DEBUG]  PCI: 00:1c.1 scanning...
[DEBUG]  PCI: pci_scan_bus for bus 03
[DEBUG]  PCI: 03:00.0 [8086/08b2] enabled
[INFO ]  Enabling Common Clock Configuration
[INFO ]  ASPM: Enabled L1
[INFO ]  PCIe: Max_Payload_Size adjusted to 128
[INFO ]  PCI: 03:00.0: Enabled LTR
[DEBUG]  scan_bus: bus PCI: 00:1c.1 finished in 0 msecs
[DEBUG]  PCI: 00:1f.0 scanning...
[DEBUG]  No CMOS option 'touchpad'.
[INFO ]  PMH7: ID 05 Revision 12
[DEBUG]  PNP: 00ff.1 enabled
[INFO ]  H8: EC Firmware ID GLHT30WW-3.23, Version 3.01B
[DEBUG]  No CMOS option 'bluetooth'.
[INFO ]  H8: WWAN detection not implemented. Assuming WWAN installed
[DEBUG]  No CMOS option 'wwan'.
[DEBUG]  PNP: 00ff.2 enabled
[DEBUG]  PNP: 0c31.0 enabled
[DEBUG]  scan_bus: bus PCI: 00:1f.0 finished in 3 msecs
[DEBUG]  PCI: 00:1f.3 scanning...
[DEBUG]  scan_bus: bus PCI: 00:1f.3 finished in 0 msecs
[DEBUG]  scan_bus: bus DOMAIN: 0000 finished in 3 msecs
[DEBUG]  scan_bus: bus Root Device finished in 3 msecs
[INFO ]  done
[DEBUG]  BS: BS_DEV_ENUMERATE run times (exec / console): 4 / 0 ms
[DEBUG]  found VGA at PCI: 00:02.0
[DEBUG]  Setting up VGA for PCI: 00:02.0
[DEBUG]  Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000
[DEBUG]  Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
[INFO ]  Allocating resources...
[INFO ]  Reading resources...
[DEBUG]  mc_add_fixed_mmio_resources: Adding MCHBAR @ 48 0xfed10000-0xfed17fff.
[DEBUG]  mc_add_fixed_mmio_resources: Adding DMIBAR @ 68 0xfed18000-0xfed18fff.
[DEBUG]  mc_add_fixed_mmio_resources: Adding EPBAR @ 40 0xfed19000-0xfed19fff.
[DEBUG]  mc_add_fixed_mmio_resources: Adding GDXCBAR @ 5420 0xfed84000-0xfed84fff.
[DEBUG]  mc_add_fixed_mmio_resources: Adding EDRAMBAR @ 5408 0xfed80000-0xfed83fff.
[DEBUG]  Adding PCIe enhanced config space BAR 0xf0000000-0xf4000000.
[DEBUG]  MC MAP: TOM: 0x400000000
[DEBUG]  MC MAP: TOUUD: 0x47de00000
[DEBUG]  MC MAP: MESEG_BASE: 0x7ffff00000
[DEBUG]  MC MAP: MESEG_LIMIT: 0xfffff
[DEBUG]  MC MAP: REMAP_BASE: 0x400000000
[DEBUG]  MC MAP: REMAP_LIMIT: 0x47ddfffff
[DEBUG]  MC MAP: TOLUD: 0x82200000
[DEBUG]  MC MAP: BGSM: 0x80000000
[DEBUG]  MC MAP: BDSM: 0x80200000
[DEBUG]  MC MAP: TSEGMB: 0x7f800000
[DEBUG]  MC MAP: GGC: 0x209
[DEBUG]  MC MAP: DPR: 0x7f800001
[INFO ]  Available memory above 4GB: 14302M
[ERROR]  PNP: 00ff.1 missing read_resources
[ERROR]  PNP: 00ff.2 missing read_resources
[INFO ]  Done reading resources.
[INFO ]  === Resource allocator: DOMAIN: 0000 - Pass 1 (relative placement) ===
[DEBUG]   PCI: 00:1c.0 io: size: 0 align: 12 gran: 12 limit: ffff
[DEBUG]   PCI: 00:1c.0 io: size: 0 align: 12 gran: 12 limit: ffff done
[DEBUG]   PCI: 00:1c.0 mem: size: 0 align: 20 gran: 20 limit: ffffffff
[DEBUG]    PCI: 02:00.0 10 *  [0x0 - 0xfff] mem
[DEBUG]   PCI: 00:1c.0 mem: size: 100000 align: 20 gran: 20 limit: ffffffff done
[DEBUG]   PCI: 00:1c.0 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff
[DEBUG]   PCI: 00:1c.0 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff done
[DEBUG]   PCI: 00:1c.1 io: size: 0 align: 12 gran: 12 limit: ffff
[DEBUG]   PCI: 00:1c.1 io: size: 0 align: 12 gran: 12 limit: ffff done
[DEBUG]   PCI: 00:1c.1 mem: size: 0 align: 20 gran: 20 limit: ffffffff
[DEBUG]    PCI: 03:00.0 10 *  [0x0 - 0x1fff] mem
[DEBUG]   PCI: 00:1c.1 mem: size: 100000 align: 20 gran: 20 limit: ffffffff done
[DEBUG]   PCI: 00:1c.1 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff
[DEBUG]   PCI: 00:1c.1 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff done
[INFO ]  === Resource allocator: DOMAIN: 0000 - Pass 2 (allocating resources) ===
[DEBUG]  DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff
[DEBUG]   avoid_fixed_resources: PCI: 00:1f.0 00 base 00000000 limit 00000fff io (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:1f.0 84 base 00001600 limit 0000167f io (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:1f.0 88 base 000015e0 limit 000015ef io (fixed)
[DEBUG]   avoid_fixed_resources: PNP: 00ff.1 77 base 000015e0 limit 000015ef io (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:1f.3 20 base 00000400 limit 0000041f io (fixed)
[INFO ]   DOMAIN: 0000: Resource ranges:
[INFO ]   * Base: 1000, Size: 5e0, Tag: 100
[INFO ]   * Base: 15f0, Size: 10, Tag: 100
[INFO ]   * Base: 1680, Size: e980, Tag: 100
[DEBUG]    PCI: 00:02.0 20 *  [0x1000 - 0x103f] limit: 103f io
[DEBUG]    PCI: 00:19.0 18 *  [0x1040 - 0x105f] limit: 105f io
[DEBUG]    PCI: 00:1f.2 20 *  [0x1060 - 0x107f] limit: 107f io
[DEBUG]    PCI: 00:1f.2 10 *  [0x1080 - 0x1087] limit: 1087 io
[DEBUG]    PCI: 00:1f.2 18 *  [0x1088 - 0x108f] limit: 108f io
[DEBUG]    PCI: 00:1f.2 14 *  [0x1090 - 0x1093] limit: 1093 io
[DEBUG]    PCI: 00:1f.2 1c *  [0x1094 - 0x1097] limit: 1097 io
[DEBUG]  DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff done
[DEBUG]  DOMAIN: 0000 mem: base: 7f800000 size: 0 align: 0 gran: 0 limit: fdffffff
[DEBUG]  DOMAIN: 0000 mem: base: 100000000 size: 0 align: 0 gran: 0 limit: 7fffffffff
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 48 base fed10000 limit fed17fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 68 base fed18000 limit fed18fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 40 base fed19000 limit fed19fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 5420 base fed84000 limit fed84fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 5408 base fed80000 limit fed83fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 60 base f0000000 limit f3ffffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 00 base fed90000 limit fed90fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 01 base fed91000 limit fed91fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 02 base 00000000 limit 0009ffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 03 base 000c0000 limit 7f7fffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 04 base 7f800000 limit 7fffffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 05 base 80000000 limit 821fffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 06 base 100000000 limit 47ddfffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 07 base 000a0000 limit 000bffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 08 base 000c0000 limit 000fffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:1f.0 31fe base fec00000 limit ffffffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PNP: 0c31.0 00 base fed40000 limit fed44fff mem (fixed)
[INFO ]   DOMAIN: 0000: Resource ranges:
[INFO ]   * Base: 82200000, Size: 6de00000, Tag: 200
[INFO ]   * Base: f4000000, Size: a000000, Tag: 200
[INFO ]   * Base: 47de00000, Size: 7b82200000, Tag: 200
[DEBUG]    PCI: 00:02.0 18 *  [0x90000000 - 0x9fffffff] limit: 9fffffff prefmem
[DEBUG]    PCI: 00:02.0 10 *  [0x82400000 - 0x827fffff] limit: 827fffff mem
[DEBUG]    PCI: 00:1c.0 20 *  [0x82200000 - 0x822fffff] limit: 822fffff mem
[DEBUG]    PCI: 00:1c.1 20 *  [0x82300000 - 0x823fffff] limit: 823fffff mem
[DEBUG]    PCI: 00:19.0 10 *  [0x82800000 - 0x8281ffff] limit: 8281ffff mem
[DEBUG]    PCI: 00:14.0 10 *  [0x82820000 - 0x8282ffff] limit: 8282ffff mem
[DEBUG]    PCI: 00:04.0 10 *  [0x82830000 - 0x82837fff] limit: 82837fff mem
[DEBUG]    PCI: 00:03.0 10 *  [0x82838000 - 0x8283bfff] limit: 8283bfff mem
[DEBUG]    PCI: 00:1b.0 10 *  [0x8283c000 - 0x8283ffff] limit: 8283ffff mem
[DEBUG]    PCI: 00:19.0 14 *  [0x82840000 - 0x82840fff] limit: 82840fff mem
[DEBUG]    PCI: 00:1f.2 24 *  [0x82841000 - 0x828417ff] limit: 828417ff mem
[DEBUG]    PCI: 00:1a.0 10 *  [0x82842000 - 0x828423ff] limit: 828423ff mem
[DEBUG]    PCI: 00:1d.0 10 *  [0x82843000 - 0x828433ff] limit: 828433ff mem
[DEBUG]    PCI: 00:1f.3 10 *  [0x82844000 - 0x828440ff] limit: 828440ff mem
[DEBUG]    PCI: 00:16.0 10 *  [0x82845000 - 0x8284500f] limit: 8284500f mem
[DEBUG]  DOMAIN: 0000 mem: base: 7f800000 size: 0 align: 0 gran: 0 limit: fdffffff done
[DEBUG]  DOMAIN: 0000 mem: base: 100000000 size: 0 align: 0 gran: 0 limit: 7fffffffff done
[DEBUG]    PCI: 02:00.0 10 *  [0x82200000 - 0x82200fff] limit: 82200fff mem
[DEBUG]    PCI: 03:00.0 10 *  [0x82300000 - 0x82301fff] limit: 82301fff mem
[INFO ]  === Resource allocator: DOMAIN: 0000 - resource allocation complete ===
[DEBUG]  PCI: 00:01.1 1c <- [0x000000000000ffff - 0x000000000000fffe] size 0x00000000 gran 0x0c bus 01 io
[DEBUG]  PCI: 00:01.1 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 bus 01 prefmem
[DEBUG]  PCI: 00:01.1 20 <- [0x00000000ffffffff - 0x00000000fffffffe] size 0x00000000 gran 0x14 bus 01 mem
[DEBUG]  PCI: 00:02.0 10 <- [0x0000000082400000 - 0x00000000827fffff] size 0x00400000 gran 0x16 mem64
[DEBUG]  PCI: 00:02.0 18 <- [0x0000000090000000 - 0x000000009fffffff] size 0x10000000 gran 0x1c prefmem64
[DEBUG]  PCI: 00:02.0 20 <- [0x0000000000001000 - 0x000000000000103f] size 0x00000040 gran 0x06 io
[DEBUG]  PCI: 00:03.0 10 <- [0x0000000082838000 - 0x000000008283bfff] size 0x00004000 gran 0x0e mem64
[DEBUG]  PCI: 00:04.0 10 <- [0x0000000082830000 - 0x0000000082837fff] size 0x00008000 gran 0x0f mem64
[DEBUG]  PCI: 00:14.0 10 <- [0x0000000082820000 - 0x000000008282ffff] size 0x00010000 gran 0x10 mem64
[DEBUG]  PCI: 00:16.0 10 <- [0x0000000082845000 - 0x000000008284500f] size 0x00000010 gran 0x04 mem64
[DEBUG]  PCI: 00:19.0 10 <- [0x0000000082800000 - 0x000000008281ffff] size 0x00020000 gran 0x11 mem
[DEBUG]  PCI: 00:19.0 14 <- [0x0000000082840000 - 0x0000000082840fff] size 0x00001000 gran 0x0c mem
[DEBUG]  PCI: 00:19.0 18 <- [0x0000000000001040 - 0x000000000000105f] size 0x00000020 gran 0x05 io
[DEBUG]  PCI: 00:1a.0 10 <- [0x0000000082842000 - 0x00000000828423ff] size 0x00000400 gran 0x0a mem
[DEBUG]  PCI: 00:1b.0 10 <- [0x000000008283c000 - 0x000000008283ffff] size 0x00004000 gran 0x0e mem64
[DEBUG]  PCI: 00:1c.0 1c <- [0x000000000000ffff - 0x000000000000fffe] size 0x00000000 gran 0x0c bus 02 io
[DEBUG]  PCI: 00:1c.0 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 bus 02 prefmem
[DEBUG]  PCI: 00:1c.0 20 <- [0x0000000082200000 - 0x00000000822fffff] size 0x00100000 gran 0x14 bus 02 mem
[DEBUG]  PCI: 02:00.0 10 <- [0x0000000082200000 - 0x0000000082200fff] size 0x00001000 gran 0x0c mem
[DEBUG]  PCI: 00:1c.1 1c <- [0x000000000000ffff - 0x000000000000fffe] size 0x00000000 gran 0x0c bus 03 io
[DEBUG]  PCI: 00:1c.1 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 bus 03 prefmem
[DEBUG]  PCI: 00:1c.1 20 <- [0x0000000082300000 - 0x00000000823fffff] size 0x00100000 gran 0x14 bus 03 mem
[DEBUG]  PCI: 03:00.0 10 <- [0x0000000082300000 - 0x0000000082301fff] size 0x00002000 gran 0x0d mem64
[DEBUG]  PCI: 00:1d.0 10 <- [0x0000000082843000 - 0x00000000828433ff] size 0x00000400 gran 0x0a mem
[ERROR]  PNP: 00ff.1 missing set_resources
[ERROR]  PNP: 00ff.2 missing set_resources
[DEBUG]  PCI: 00:1f.2 10 <- [0x0000000000001080 - 0x0000000000001087] size 0x00000008 gran 0x03 io
[DEBUG]  PCI: 00:1f.2 14 <- [0x0000000000001090 - 0x0000000000001093] size 0x00000004 gran 0x02 io
[DEBUG]  PCI: 00:1f.2 18 <- [0x0000000000001088 - 0x000000000000108f] size 0x00000008 gran 0x03 io
[DEBUG]  PCI: 00:1f.2 1c <- [0x0000000000001094 - 0x0000000000001097] size 0x00000004 gran 0x02 io
[DEBUG]  PCI: 00:1f.2 20 <- [0x0000000000001060 - 0x000000000000107f] size 0x00000020 gran 0x05 io
[DEBUG]  PCI: 00:1f.2 24 <- [0x0000000082841000 - 0x00000000828417ff] size 0x00000800 gran 0x0b mem
[DEBUG]  PCI: 00:1f.3 10 <- [0x0000000082844000 - 0x00000000828440ff] size 0x00000100 gran 0x08 mem64
[INFO ]  Done setting resources.
[INFO ]  Done allocating resources.
[DEBUG]  BS: BS_DEV_RESOURCES run times (exec / console): 2 / 0 ms
[INFO ]  Enabling resources...
[DEBUG]  PCI: 00:00.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:00.0 cmd <- 06
[DEBUG]  PCI: 00:01.1 bridge ctrl <- 0013
[DEBUG]  PCI: 00:01.1 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:01.1 cmd <- 00
[DEBUG]  PCI: 00:02.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:02.0 cmd <- 03
[DEBUG]  PCI: 00:03.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:03.0 cmd <- 02
[DEBUG]  PCI: 00:04.0 cmd <- 02
[DEBUG]  PCI: 00:14.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:14.0 cmd <- 102
[DEBUG]  PCI: 00:16.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:16.0 cmd <- 02
[DEBUG]  PCI: 00:19.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:19.0 cmd <- 103
[DEBUG]  PCI: 00:1a.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1a.0 cmd <- 102
[DEBUG]  PCI: 00:1b.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1b.0 cmd <- 102
[DEBUG]  PCI: 00:1c.0 bridge ctrl <- 0013
[DEBUG]  PCI: 00:1c.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1c.0 cmd <- 06
[DEBUG]  PCI: 00:1c.1 bridge ctrl <- 0013
[DEBUG]  PCI: 00:1c.1 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1c.1 cmd <- 06
[DEBUG]  PCI: 00:1d.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1d.0 cmd <- 102
[DEBUG]  PCI: 00:1f.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1f.0 cmd <- 107
[DEBUG]  PCI: 00:1f.2 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1f.2 cmd <- 103
[DEBUG]  PCI: 00:1f.3 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1f.3 cmd <- 103
[DEBUG]  PCI: 02:00.0 cmd <- 02
[DEBUG]  PCI: 03:00.0 cmd <- 02
[INFO ]  done.
[INFO ]  Initializing devices...
[DEBUG]  CPU_CLUSTER: 0 init
[DEBUG]  MTRR: Physical address space:
[DEBUG]  0x0000000000000000 - 0x000000000009ffff size 0x000a0000 type 6
[DEBUG]  0x00000000000a0000 - 0x00000000000bffff size 0x00020000 type 0
[DEBUG]  0x00000000000c0000 - 0x000000007fffffff size 0x7ff40000 type 6
[DEBUG]  0x0000000080000000 - 0x000000008fffffff size 0x10000000 type 0
[DEBUG]  0x0000000090000000 - 0x000000009fffffff size 0x10000000 type 1
[DEBUG]  0x00000000a0000000 - 0x00000000ffffffff size 0x60000000 type 0
[DEBUG]  0x0000000100000000 - 0x000000047ddfffff size 0x37de00000 type 6
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x250 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x258 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x259 0x0000000000000000
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x268 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x269 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26a 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26b 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26c 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26d 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26e 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26f 0x0606060606060606
[DEBUG]  apic_id 0x0 setup mtrr for CPU physical address size: 39 bits
[DEBUG]  MTRR: default type WB/UC MTRR counts: 4/5.
[DEBUG]  MTRR: WB selected as default type.
[DEBUG]  MTRR: 0 base 0x0000000080000000 mask 0x0000007ff0000000 type 0
[DEBUG]  MTRR: 1 base 0x0000000090000000 mask 0x0000007ff0000000 type 1
[DEBUG]  MTRR: 2 base 0x00000000a0000000 mask 0x0000007fe0000000 type 0
[DEBUG]  MTRR: 3 base 0x00000000c0000000 mask 0x0000007fc0000000 type 0

[DEBUG]  MTRR check
[DEBUG]  Fixed MTRRs   : Enabled
[DEBUG]  Variable MTRRs: Enabled

[DEBUG]  Initializing VR config.
[DEBUG]  CPU has 2 cores, 4 threads enabled.
[DEBUG]  Setting up SMI for CPU
[INFO ]  Will perform SMM setup.
[INFO ]  CBFS: Found 'cpu_microcode_blob.bin' @0xc500 size 0xf800 in mcache @0x7f7dd0ac
[DEBUG]  microcode: sig=0x306c3 pf=0x10 revision=0x28
[INFO ]  CPU: Intel(R) Core(TM) i7-4600M CPU @ 2.90GHz.
[INFO ]  LAPIC 0x0 in XAPIC mode.
[DEBUG]  CPU: APIC: 00 enabled
[DEBUG]  CPU: APIC: 01 enabled
[DEBUG]  CPU: APIC: 02 enabled
[DEBUG]  CPU: APIC: 03 enabled
[DEBUG]  Loading module at 0x00030000 with entry 0x00030000. filesize: 0x178 memsize: 0x178
[DEBUG]  Processing 16 relocs. Offset value of 0x00030000
[DEBUG]  Attempting to start 3 APs
[DEBUG]  Waiting for 10ms after sending INIT.
[DEBUG]  Waiting for SIPI to complete...
[DEBUG]  done.
[DEBUG]  Waiting for SIPI to complete...
[INFO ]  LAPIC 0x1 in XAPIC mode.
[DEBUG]  done.
[INFO ]  AP: slot 1 apic_id 1, MCU rev: 0x00000028
[INFO ]  LAPIC 0x2 in XAPIC mode.
[INFO ]  LAPIC 0x3 in XAPIC mode.
[INFO ]  AP: slot 2 apic_id 2, MCU rev: 0x00000028
[INFO ]  AP: slot 3 apic_id 3, MCU rev: 0x00000028
[DEBUG]  Loading module at 0x00038000 with entry 0x00038000. filesize: 0x1a0 memsize: 0x1a0
[DEBUG]  Processing 9 relocs. Offset value of 0x00038000
[DEBUG]  smm_module_setup_stub: stack_top = 0x7f801000
[DEBUG]  smm_module_setup_stub: per cpu stack_size = 0x400
[DEBUG]  smm_module_setup_stub: runtime.smm_size = 0x10000
[DEBUG]  SMM Module: stub loaded at 38000. Will call 0x7f7a0c2a
[DEBUG]  Installing permanent SMM handler to 0x7f800000
[DEBUG]  HANDLER      [0x7fafb000-0x7faff750]

[DEBUG]  CPU 0
[DEBUG]    ss0        [0x7fafac00-0x7fafb000]
[DEBUG]    stub0      [0x7faf3000-0x7faf31a0]

[DEBUG]  CPU 1
[DEBUG]    ss1        [0x7fafa800-0x7fafac00]
[DEBUG]    stub1      [0x7faf2c00-0x7faf2da0]

[DEBUG]  CPU 2
[DEBUG]    ss2        [0x7fafa400-0x7fafa800]
[DEBUG]    stub2      [0x7faf2800-0x7faf29a0]

[DEBUG]  CPU 3
[DEBUG]    ss3        [0x7fafa000-0x7fafa400]
[DEBUG]    stub3      [0x7faf2400-0x7faf25a0]

[DEBUG]  stacks       [0x7f800000-0x7f801000]
[DEBUG]  Loading module at 0x7fafb000 with entry 0x7fafbeff. filesize: 0x4628 memsize: 0x4750
[DEBUG]  Processing 270 relocs. Offset value of 0x7fafb000
[DEBUG]  Loading module at 0x7faf3000 with entry 0x7faf3000. filesize: 0x1a0 memsize: 0x1a0
[DEBUG]  Processing 9 relocs. Offset value of 0x7faf3000
[DEBUG]  smm_module_setup_stub: stack_top = 0x7f801000
[DEBUG]  smm_module_setup_stub: per cpu stack_size = 0x400
[DEBUG]  smm_module_setup_stub: runtime.smm_size = 0x300000
[DEBUG]  SMM Module: placing smm entry code at 7faf2c00,  cpu # 0x1
[DEBUG]  SMM Module: placing smm entry code at 7faf2800,  cpu # 0x2
[DEBUG]  SMM Module: placing smm entry code at 7faf2400,  cpu # 0x3
[DEBUG]  SMM Module: stub loaded at 7faf3000. Will call 0x7fafbeff
[DEBUG]  SMI_STS: MCSMI PM1 
[DEBUG]  WAK PWRBTN TMROF smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x7faeb000, cpu = 0
[DEBUG]  In relocation handler: CPU 0
[DEBUG]  New SMBASE=0x7faeb000 IEDBASE=0x7fc00000
[DEBUG]  Writing SMRR. base = 0x7f800006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x7faeac00, cpu = 1
[DEBUG]  In relocation handler: CPU 1
[DEBUG]  New SMBASE=0x7faeac00 IEDBASE=0x7fc00000
[DEBUG]  Writing SMRR. base = 0x7f800006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x7faea400, cpu = 3
[DEBUG]  In relocation handler: CPU 3
[DEBUG]  New SMBASE=0x7faea400 IEDBASE=0x7fc00000
[DEBUG]  Writing SMRR. base = 0x7f800006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x7faea800, cpu = 2
[DEBUG]  In relocation handler: CPU 2
[DEBUG]  New SMBASE=0x7faea800 IEDBASE=0x7fc00000
[DEBUG]  Writing SMRR. base = 0x7f800006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  Initializing CPU #0
[DEBUG]  CPU: vendor Intel device 306c3
[DEBUG]  CPU: family 06, model 3c, stepping 03
[DEBUG]  VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL status: locked
[DEBUG]  cpu: energy policy set to 6
[INFO ]  Turbo is available but hidden
[INFO ]  Turbo is available and visible
[INFO ]  CPU #0 initialized
[INFO ]  Initializing CPU #1
[INFO ]  Initializing CPU #2
[INFO ]  Initializing CPU #3
[DEBUG]  CPU: vendor Intel device 306c3
[DEBUG]  CPU: family 06, model 3c, stepping 03
[DEBUG]  CPU: vendor Intel device 306c3
[DEBUG]  CPU: family 06, model 3c, stepping 03
[DEBUG]  CPU: vendor Intel device 306c3
[DEBUG]  CPU: family 06, model 3c, stepping 03
[DEBUG]  VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL status: locked
[DEBUG]  VMX status: enabled
[DEBUG]  VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL status: locked
[DEBUG]  IA32_FEATURE_CONTROL status: locked
[DEBUG]  cpu: energy policy set to 6
[INFO ]  CPU #2 initialized
[DEBUG]  cpu: energy policy set to 6
[DEBUG]  cpu: energy policy set to 6
[INFO ]  CPU #3 initialized
[INFO ]  CPU #1 initialized
[INFO ]  bsp_do_flight_plan done after 2 msecs.
[DEBUG]  CPU: frequency set to 3600
[DEBUG]  Enabling SMIs.
[DEBUG]  Locking SMM.
[DEBUG]  CPU_CLUSTER: 0 init finished in 12 msecs
[DEBUG]  PCI: 00:00.0 init
[DEBUG]  Disabling PEG12.
[DEBUG]  Disabling PEG10.
[DEBUG]  Disabling "device 7".
[DEBUG]  Set BIOS_RESET_CPL
[DEBUG]  CPU TDP: 37 Watts
[DEBUG]  PCI: 00:00.0 init finished in 1 msecs
[DEBUG]  PCI: 00:01.1 init
[DEBUG]  PCI: 00:01.1 init finished in 0 msecs
[DEBUG]  PCI: 00:02.0 init
[INFO ]  CBFS: Found 'vbt.bin' @0x3e480 size 0x582 in mcache @0x7f7dd204
[INFO ]  Found a VBT of 4608 bytes after decompression
[INFO ]  GMA: Found VBT in CBFS
[INFO ]  GMA: Found valid VBT in CBFS
[DEBUG]  GT Power Management Init
[INFO ]  GMA: Setting backlight PWM frequency to 135MHz / 128 / 4794 = 220Hz
[INFO ]  framebuffer_info: bytes_per_line: 4096, bits_per_pixel: 32
[INFO ]                     x_res x y_res: 1024 x 768, size: 3145728 at 0x90000000
[DEBUG]  GT Power Management Init (post VBIOS)
[DEBUG]  PCI: 00:02.0 init finished in 224 msecs
[DEBUG]  PCI: 00:03.0 init
[DEBUG]  Mini-HD: base = 0x82838000
[DEBUG]  azalia_audio: Initializing codec #0
[DEBUG]  azalia_audio: codec viddid: 80862807
[DEBUG]  azalia_audio: verb_size: 16
[DEBUG]  azalia_audio: verb loaded.
[DEBUG]  PCI: 00:03.0 init finished in 3 msecs
[DEBUG]  PCI: 00:04.0 init
[DEBUG]  PCI: 00:04.0 init finished in 0 msecs
[DEBUG]  PCI: 00:14.0 init
[DEBUG]  PCI: 00:14.0 init finished in 0 msecs
[DEBUG]  PCI: 00:16.0 init
[DEBUG]  ME: FW Partition Table      : OK
[DEBUG]  ME: Bringup Loader Failure  : NO
[DEBUG]  ME: Firmware Init Complete  : NO
[DEBUG]  ME: Manufacturing Mode      : YES
[DEBUG]  ME: Boot Options Present    : NO
[DEBUG]  ME: Update In Progress      : NO
[DEBUG]  ME: Current Working State   : Initializing
[DEBUG]  ME: Current Operation State : Bring up
[DEBUG]  ME: Current Operation Mode  : Debug
[DEBUG]  ME: Error Code              : No Error
[DEBUG]  ME: Progress Phase          : BUP Phase
[DEBUG]  ME: Power Management Event  : Clean Moff->Mx wake
[DEBUG]  ME: Progress Phase State    : 0x4d
[CRIT ]  intel_me_path: mbp is not ready!
[NOTE ]  ME: BIOS path: Error
[ERROR]  ME: MBP not ready
[DEBUG]  PCI: 00:16.0 init finished in 0 msecs
[DEBUG]  PCI: 00:19.0 init
[DEBUG]  PCI: 00:19.0 init finished in 0 msecs
[DEBUG]  PCI: 00:1a.0 init
[DEBUG]  EHCI: Setting up controller.. done.
[DEBUG]  PCI: 00:1a.0 init finished in 0 msecs
[DEBUG]  PCI: 00:1b.0 init
[DEBUG]  Azalia: base = 0x8283c000
[DEBUG]  Azalia: codec_mask = 01
[DEBUG]  azalia_audio: Initializing codec #0
[DEBUG]  azalia_audio: codec viddid: 10ec0292
[DEBUG]  azalia_audio: verb_size: 128
[DEBUG]  azalia_audio: verb loaded.
[DEBUG]  PCI: 00:1b.0 init finished in 7 msecs
[DEBUG]  PCI: 00:1c.0 init
[DEBUG]  Initializing PCH PCIe bridge.
[DEBUG]  PCI: 00:1c.0 init finished in 0 msecs
[DEBUG]  PCI: 00:1c.1 init
[DEBUG]  Initializing PCH PCIe bridge.
[DEBUG]  PCI: 00:1c.1 init finished in 0 msecs
[DEBUG]  PCI: 00:1d.0 init
[DEBUG]  EHCI: Setting up controller.. done.
[DEBUG]  PCI: 00:1d.0 init finished in 0 msecs
[DEBUG]  PCI: 00:1f.0 init
[DEBUG]  pch: lpc_init
[DEBUG]  IOAPIC: Initializing IOAPIC at 0xfec00000
[DEBUG]  IOAPIC: ID = 0x00
[DEBUG]  IOAPIC: 24 interrupts
[DEBUG]  IOAPIC: Clearing IOAPIC at 0xfec00000
[DEBUG]  IOAPIC: Bootstrap Processor Local APIC = 0x00
[INFO ]  Set power off after power failure.
[INFO ]  NMI sources enabled.
[DEBUG]  LynxPoint H PM init
[DEBUG]  RTC: failed = 0x0
[DEBUG]  RTC Init
[DEBUG]  apm_control: Disabling ACPI.
[DEBUG]  APMC done.
[DEBUG]  PCI: 00:1f.0 init finished in 0 msecs
[DEBUG]  PCI: 00:1f.2 init
[DEBUG]  SATA: Initializing...
[DEBUG]  SATA: Controller in AHCI mode.
[DEBUG]  ABAR: 0x82841000
[DEBUG]  PCI: 00:1f.2 init finished in 0 msecs
[DEBUG]  PCI: 00:1f.3 init
[DEBUG]  PCI: 00:1f.3 init finished in 0 msecs
[DEBUG]  PCI: 02:00.0 init
[DEBUG]  PCI: 02:00.0 init finished in 0 msecs
[DEBUG]  PCI: 03:00.0 init
[DEBUG]  PCI: 03:00.0 init finished in 0 msecs
[DEBUG]  PNP: 00ff.2 init
[DEBUG]  PNP: 00ff.2 init finished in 0 msecs
[INFO ]  Devices initialized
[DEBUG]  BS: BS_DEV_INIT run times (exec / console): 250 / 0 ms
[DEBUG]  FMAP: area SMMSTORE found @ 810000 (262144 bytes)
[DEBUG]  flash size 0x2800000 bytes
[INFO ]  SF: Detected 00 0000 with sector size 0x1000, total 0x2800000
[ERROR]  SF size 0x2800000 does not correspond to CONFIG_ROM_SIZE 0xc00000!!
[DEBUG]  smm store: 4 # blocks with size 0x10000
[INFO ]  SMMSTORE: Setting up SMI handler
[INFO ]  Found TPM ST33ZP24 by ST Microelectronics
[DEBUG]  TPM: Startup
[DEBUG]  TPM: command 0x99 returned 0x0
[DEBUG]  TPM: Asserting physical presence
[DEBUG]  TPM: command 0x4000000a returned 0x0
[DEBUG]  TPM: command 0x65 returned 0x0
[DEBUG]  TPM: flags disable=0, deactivated=0, nvlocked=1
[INFO ]  TPM: setup succeeded
[DEBUG]  BS: BS_DEV_INIT exit times (exec / console): 57 / 0 ms
[INFO ]  Finalize devices...
[DEBUG]  PCI: 00:00.0 final
[DEBUG]  PCI: 00:16.0 final
[INFO ]  ME: MBP cleared
[DEBUG]  PCI: 00:1b.0 final
[DEBUG]  PCI: 00:1f.0 final
[DEBUG]  apm_control: Finalizing SMM.
[DEBUG]  APMC done.
[INFO ]  Devices finalized
[INFO ]  CBFS: Found 'fallback/dsdt.aml' @0x3adc0 size 0x367a in mcache @0x7f7dd1d8
[WARN ]  CBFS: 'fallback/slic' not found.
[INFO ]  ACPI: Writing ACPI tables at 7f730000.
[DEBUG]  ACPI:    * FACS
[DEBUG]  ACPI:    * DSDT
[DEBUG]  ACPI:    * FADT
[DEBUG]  ACPI: added table 1/32, length now 40
[DEBUG]  ACPI:     * SSDT
[DEBUG]  Found 1 CPU(s) with 4 core(s) each.
[DEBUG]  PSS: 2901MHz power 37000 control 0x2400 status 0x2400
[DEBUG]  PSS: 2900MHz power 37000 control 0x1d00 status 0x1d00
[DEBUG]  PSS: 2400MHz power 28854 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 22943 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 17471 control 0x1000 status 0x1000
[DEBUG]  PSS: 1200MHz power 12469 control 0xc00 status 0xc00
[DEBUG]  PSS: 800MHz power 7885 control 0x800 status 0x800
[DEBUG]  PSS: 2901MHz power 37000 control 0x2400 status 0x2400
[DEBUG]  PSS: 2900MHz power 37000 control 0x1d00 status 0x1d00
[DEBUG]  PSS: 2400MHz power 28854 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 22943 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 17471 control 0x1000 status 0x1000
[DEBUG]  PSS: 1200MHz power 12469 control 0xc00 status 0xc00
[DEBUG]  PSS: 800MHz power 7885 control 0x800 status 0x800
[DEBUG]  PSS: 2901MHz power 37000 control 0x2400 status 0x2400
[DEBUG]  PSS: 2900MHz power 37000 control 0x1d00 status 0x1d00
[DEBUG]  PSS: 2400MHz power 28854 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 22943 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 17471 control 0x1000 status 0x1000
[DEBUG]  PSS: 1200MHz power 12469 control 0xc00 status 0xc00
[DEBUG]  PSS: 800MHz power 7885 control 0x800 status 0x800
[DEBUG]  PSS: 2901MHz power 37000 control 0x2400 status 0x2400
[DEBUG]  PSS: 2900MHz power 37000 control 0x1d00 status 0x1d00
[DEBUG]  PSS: 2400MHz power 28854 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 22943 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 17471 control 0x1000 status 0x1000
[DEBUG]  PSS: 1200MHz power 12469 control 0xc00 status 0xc00
[DEBUG]  PSS: 800MHz power 7885 control 0x800 status 0x800
[DEBUG]  Generating ACPI PIRQ entries
[INFO ]  ACPI:    * H8
[INFO ]  H8: BDC detection not implemented. Assuming BDC installed
[INFO ]  H8: WWAN detection not implemented. Assuming WWAN installed
[INFO ]  \_SB_.PCI0.TPM: LPC TPM PNP: 0c31.0
[DEBUG]  ACPI: added table 2/32, length now 44
[DEBUG]  ACPI:    * MCFG
[DEBUG]  ACPI: added table 3/32, length now 48
[DEBUG]  ACPI:    * TCPA
[DEBUG]  TCPA log created at 0x7f720000
[DEBUG]  ACPI: added table 4/32, length now 52
[DEBUG]  ACPI:    * MADT
[DEBUG]  IOAPIC: 24 interrupts
[DEBUG]  ACPI: added table 5/32, length now 56
[DEBUG]  ACPI:    * SPCR
[DEBUG]  current = 7f7352c0
[DEBUG]  ACPI:    * DMAR
[DEBUG]  ACPI: added table 6/32, length now 60
[DEBUG]  ACPI:    * HPET
[DEBUG]  ACPI: added table 7/32, length now 64
[DEBUG]  current = 7f7353c0
[INFO ]  ACPI: done.
[DEBUG]  ACPI tables: 21440 bytes.
[DEBUG]  smbios_write_tables: 7f718000
[DEBUG]  SMBIOS firmware version is set to coreboot_version: '4.20-521-g0a810a2881'
[INFO ]  Create SMBIOS type 16
[INFO ]  Create SMBIOS type 17
[INFO ]  Create SMBIOS type 20
[INFO ]  PCI: 03:00.0 (unknown)
[DEBUG]  SMBIOS tables: 1119 bytes.
[DEBUG]  Writing table forward entry at 0x00000500
[DEBUG]  Wrote coreboot table at: 0x00000500, 0x10 bytes, checksum 4069
[DEBUG]  Writing coreboot table at 0x7f754000
[INFO ]  CBFS: Found 'cmos_layout.bin' @0x3eb80 size 0x510 in mcache @0x7f7dd25c
[DEBUG]   0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
[DEBUG]   1. 0000000000001000-000000000009ffff: RAM
[DEBUG]   2. 00000000000a0000-00000000000fffff: RESERVED
[DEBUG]   3. 0000000000100000-000000007f717fff: RAM
[DEBUG]   4. 000000007f718000-000000007f780fff: CONFIGURATION TABLES
[DEBUG]   5. 000000007f781000-000000007f7cdfff: RAMSTAGE
[DEBUG]   6. 000000007f7ce000-000000007f7fffff: CONFIGURATION TABLES
[DEBUG]   7. 000000007f800000-00000000821fffff: RESERVED
[DEBUG]   8. 00000000f0000000-00000000f3ffffff: RESERVED
[DEBUG]   9. 00000000fed10000-00000000fed19fff: RESERVED
[DEBUG]  10. 00000000fed40000-00000000fed44fff: RESERVED
[DEBUG]  11. 00000000fed80000-00000000fed84fff: RESERVED
[DEBUG]  12. 00000000fed90000-00000000fed91fff: RESERVED
[DEBUG]  13. 0000000100000000-000000047ddfffff: RAM
[DEBUG]  Wrote coreboot table at: 0x7f754000, 0x95c bytes, checksum 875a
[DEBUG]  coreboot table: 2420 bytes.
[DEBUG]  IMD ROOT    0. 0x7f7ff000 0x00001000
[DEBUG]  IMD SMALL   1. 0x7f7fe000 0x00001000
[DEBUG]  CONSOLE     2. 0x7f7de000 0x00020000
[DEBUG]  RO MCACHE   3. 0x7f7dd000 0x00000378
[DEBUG]  TIME STAMP  4. 0x7f7dc000 0x00000910
[DEBUG]  MEM INFO    5. 0x7f7db000 0x000007a8
[DEBUG]  AFTER CAR   6. 0x7f7ce000 0x0000d000
[DEBUG]  RAMSTAGE    7. 0x7f780000 0x0004e000
[DEBUG]  SMM BACKUP  8. 0x7f770000 0x00010000
[DEBUG]  IGD OPREGION 9. 0x7f76c000 0x00003130
[DEBUG]  SMM COMBUFFER10. 0x7f75c000 0x00010000
[DEBUG]  COREBOOT   11. 0x7f754000 0x00008000
[DEBUG]  ACPI       12. 0x7f730000 0x00024000
[DEBUG]  TCPA TCGLOG13. 0x7f720000 0x00010000
[DEBUG]  SMBIOS     14. 0x7f718000 0x00008000
[DEBUG]  IMD small region:
[DEBUG]    IMD ROOT    0. 0x7f7fec00 0x00000400
[DEBUG]    FMAP        1. 0x7f7feae0 0x0000010a
[DEBUG]    ROMSTAGE    2. 0x7f7feac0 0x00000004
[DEBUG]    ROMSTG STCK 3. 0x7f7fea00 0x000000a8
[DEBUG]    ACPI GNVS   4. 0x7f7fe940 0x000000b0
[DEBUG]  BS: BS_WRITE_TABLES run times (exec / console): 4 / 0 ms
[INFO ]  CBFS: Found 'fallback/payload' @0x44c00 size 0x10e594 in mcache @0x7f7dd2c8
[DEBUG]  Checking segment from ROM address 0xffc94e2c
[DEBUG]  Checking segment from ROM address 0xffc94e48
[DEBUG]  Loading segment from ROM address 0xffc94e2c
[DEBUG]    code (compression=1)
[DEBUG]    New segment dstaddr 0x00800000 memsize 0x1000000 srcaddr 0xffc94e64 filesize 0x10e55c
[DEBUG]  Loading Segment: addr: 0x00800000 memsz: 0x0000000001000000 filesz: 0x000000000010e55c
[DEBUG]  using LZMA
[DEBUG]  Loading segment from ROM address 0xffc94e48
[DEBUG]    Entry Point 0x0080168c
[DEBUG]  BS: BS_PAYLOAD_LOAD run times (exec / console): 349 / 0 ms
[DEBUG]  ICH-NM10-PCH: watchdog disabled
[DEBUG]  Jumping to boot code at 0x0080168c(0x7f754000)


[NOTE ]  coreboot-4.20-521-g0a810a2881 Fri Jun 30 19:29:06 UTC 2023 x86_32 bootblock starting (log level: 7)...
[DEBUG]  FMAP: Found "FLASH" version 1.1 at 0x850000.
[DEBUG]  FMAP: base = 0xff400000 size = 0xc00000 #areas = 5
[DEBUG]  FMAP: area COREBOOT found @ 850200 (3866112 bytes)
[INFO ]  CBFS: mcache @0xff7c2e00 built for 16 files, used 0x378 of 0x4000 bytes
[WARN ]  CBFS: 'coreboot-stages' not found.
[INFO ]  CBFS: Found 'fallback/romstage' @0x80 size 0xc3c8 in mcache @0xff7c2e2c
[DEBUG]  BS: bootblock times (exec / console): total (unknown) / 0 ms


[NOTE ]  coreboot-4.20-521-g0a810a2881 Fri Jun 30 19:29:06 UTC 2023 x86_32 romstage starting (log level: 7)...
[DEBUG]  Disabling Watchdog reboot... done.
[DEBUG]  SMBus controller enabled
[DEBUG]  Setting up static northbridge registers... done.
[DEBUG]  Started PEG11 link training.
[DEBUG]  Temporarily hiding PEG11.
[DEBUG]  Started PEG10 link training.
[DEBUG]  Temporarily hiding PEG10.
[DEBUG]  Initializing IGD...
[DEBUG]  Back from haswell_early_initialization()
[DEBUG]  CPU id(306c3) ucode:00000028 Intel(R) Core(TM) i7-4600M CPU @ 2.90GHz
[DEBUG]  AES supported, TXT supported, VT supported
[DEBUG]  PCH type: QM87, device id: 8c4f, rev id 5
[DEBUG]  Starting UEFI PEI System Agent
[DEBUG]  FMAP: area RW_MRC_CACHE found @ 800000 (65536 bytes)
[DEBUG]  prepare_mrc_cache: at 0xffc00034, size fd4
[INFO ]  CBFS: Found 'mrc.bin' @0x34fdc0 size 0x2e6e4 in mcache @0xff7c30f4
System Agent: Starting up...
System Agent: Initializing PCH
install_ppi: overwrite GUID {ed097352-9041-445a-80b6-b29d509e8845}
install_ppi: overwrite GUID {908c7f8b-5c48-47fb-8357-f5fd4e235276}
System Agent: Initializing PCH (SMBUS)
System Agent: Initializing PCH (USB)
System Agent: Initializing PCH (SA Init)
System Agent: Initializing PCH (Me UMA)
System Agent: Initializing Memory
System Agent: Done.
Sanity checking heap.
[DEBUG]  MRC Version 1.6.1 Build 2
[DEBUG]  memcfg DDR3 clock 1600 MHz
[DEBUG]  memcfg channel assignment: A: 0, B  1, C  2
[DEBUG]  memcfg channel[0] config (00620020):
[DEBUG]     ECC inactive
[DEBUG]     enhanced interleave mode on
[DEBUG]     rank interleave on
[DEBUG]     DIMMA 8192 MB width x8 or x32 dual rank, selected
[DEBUG]     DIMMB 0 MB width x8 or x32 single rank
[DEBUG]  memcfg channel[1] config (00620020):
[DEBUG]     ECC inactive
[DEBUG]     enhanced interleave mode on
[DEBUG]     rank interleave on
[DEBUG]     DIMMA 8192 MB width x8 or x32 dual rank, selected
[DEBUG]     DIMMB 0 MB width x8 or x32 single rank
[DEBUG]  ME: FW Partition Table      : OK
[DEBUG]  ME: Bringup Loader Failure  : NO
[DEBUG]  ME: Firmware Init Complete  : NO
[DEBUG]  ME: Manufacturing Mode      : YES
[DEBUG]  ME: Boot Options Present    : NO
[DEBUG]  ME: Update In Progress      : NO
[DEBUG]  ME: Current Working State   : Initializing
[DEBUG]  ME: Current Operation State : Bring up
[DEBUG]  ME: Current Operation Mode  : Debug
[DEBUG]  ME: Error Code              : No Error
[DEBUG]  ME: Progress Phase          : BUP Phase
[DEBUG]  ME: Power Management Event  : Pseudo-global reset
[DEBUG]  ME: Progress Phase State    : 0x4d
[DEBUG]  CBMEM:
[DEBUG]  IMD: root @ 0x7f7ff000 254 entries.
[DEBUG]  IMD: root @ 0x7f7fec00 62 entries.
[DEBUG]  External stage cache:
[DEBUG]  IMD: root @ 0x7fbff000 254 entries.
[DEBUG]  IMD: root @ 0x7fbfec00 62 entries.
[DEBUG]  FMAP: area RW_MRC_CACHE found @ 800000 (65536 bytes)
[DEBUG]  MRC: Checking cached data update for 'RW_MRC_CACHE'.
[DEBUG]  flash size 0x2800000 bytes
[INFO ]  SF: Detected 00 0000 with sector size 0x1000, total 0x2800000
[ERROR]  SF size 0x2800000 does not correspond to CONFIG_ROM_SIZE 0xc00000!!
[DEBUG]  MRC: 'RW_MRC_CACHE' does not need update.
[DEBUG]  Unhiding PEG10.
[DEBUG]  Unhiding PEG11.
[DEBUG]  SMM Memory Map
[DEBUG]  SMRAM       : 0x7f800000 0x800000
[DEBUG]   Subregion 0: 0x7f800000 0x300000
[DEBUG]   Subregion 1: 0x7fb00000 0x100000
[DEBUG]   Subregion 2: 0x7fc00000 0x400000
[DEBUG]  Normal boot
[INFO ]  CBFS: Found 'fallback/postcar' @0x3f0c0 size 0x5afc in mcache @0xff7c3084
[DEBUG]  Loading module at 0x7f7cf000 with entry 0x7f7cf031. filesize: 0x5720 memsize: 0xba58
[DEBUG]  Processing 231 relocs. Offset value of 0x7d7cf000
[DEBUG]  BS: romstage times (exec / console): total (unknown) / 1 ms


[NOTE ]  coreboot-4.20-521-g0a810a2881 Fri Jun 30 19:29:06 UTC 2023 x86_32 postcar starting (log level: 7)...
[DEBUG]  Normal boot
[INFO ]  CBFS: Found 'fallback/ramstage' @0x1be00 size 0x1ddd6 in mcache @0x7f7dd10c
[DEBUG]  Loading module at 0x7f781000 with entry 0x7f781000. filesize: 0x3bac0 memsize: 0x4cc30
[DEBUG]  Processing 4086 relocs. Offset value of 0x7b781000
[DEBUG]  BS: postcar times (exec / console): total (unknown) / 0 ms


[NOTE ]  coreboot-4.20-521-g0a810a2881 Fri Jun 30 19:29:06 UTC 2023 x86_32 ramstage starting (log level: 7)...
[DEBUG]  Normal boot
[INFO ]  Enumerating buses...
[DEBUG]  Root Device scanning...
[DEBUG]  CPU_CLUSTER: 0 enabled
[DEBUG]  DOMAIN: 0000 enabled
[DEBUG]  DOMAIN: 0000 scanning...
[DEBUG]  PCI: pci_scan_bus for bus 00
[DEBUG]  PCI: 00:00.0 [8086/0c04] enabled
[INFO ]  PCI: Static device PCI: 00:01.0 not found, disabling it.
[DEBUG]  PCI: 00:01.1 [8086/0c05] enabled
[DEBUG]  PCI: 00:02.0 [8086/0416] enabled
[DEBUG]  PCI: 00:03.0 [8086/0c0c] enabled
[DEBUG]  PCI: 00:04.0 [8086/0c03] enabled
[DEBUG]  PCI: 00:14.0 [8086/8c31] enabled
[DEBUG]  PCI: 00:16.0 [8086/8c3a] enabled
[DEBUG]  PCI: 00:16.1: Disabling device
[DEBUG]  PCI: 00:16.2: Disabling device
[DEBUG]  PCI: 00:16.3: Disabling device
[DEBUG]  PCI: 00:19.0 [8086/1502] enabled
[DEBUG]  PCI: 00:1a.0 [8086/8c2d] enabled
[DEBUG]  PCI: 00:1b.0 [8086/8c20] enabled
[DEBUG]  PCIe Root Port 1 ASPM is disabled
[DEBUG]  PCI: 00:1c.0 [8086/8c10] enabled
[DEBUG]  PCIe Root Port 2 ASPM is disabled
[DEBUG]  PCI: 00:1c.1 [8086/8c12] enabled
[DEBUG]  PCI: 00:1c.2 [8086/8c14] disabled
[DEBUG]  PCI: 00:1c.3 [8086/8c16] disabled
[DEBUG]  Adjusted number of PCIe root ports to 5 as per strpfusecfg2
[DEBUG]  PCI: 00:1c.2: Disabling device
[DEBUG]  PCI: 00:1c.3: Disabling device
[DEBUG]  PCI: 00:1c.4: Disabling device
[DEBUG]  PCI: 00:1c.4 [8086/8c18] disabled
[DEBUG]  PCI: 00:1d.0 [8086/8c26] enabled
[DEBUG]  PCI: 00:1f.0 [8086/8c4f] enabled
[DEBUG]  PCI: 00:1f.2 [8086/8c03] enabled
[DEBUG]  PCI: 00:1f.3 [8086/8c22] enabled
[DEBUG]  PCI: 00:1f.5: Disabling device
[DEBUG]  PCI: 00:1f.6: Disabling device
[WARN ]  PCI: Leftover static devices:
[WARN ]  PCI: 00:01.0
[WARN ]  PCI: 00:16.1
[WARN ]  PCI: 00:16.2
[WARN ]  PCI: 00:16.3
[WARN ]  PCI: 00:1c.5
[WARN ]  PCI: 00:1c.6
[WARN ]  PCI: 00:1c.7
[WARN ]  PCI: 00:1f.5
[WARN ]  PCI: 00:1f.6
[WARN ]  PCI: Check your devicetree.cb.
[DEBUG]  PCI: 00:01.1 scanning...
[DEBUG]  PCI: pci_scan_bus for bus 01
[DEBUG]  scan_bus: bus PCI: 00:01.1 finished in 0 msecs
[DEBUG]  PCI: 00:1c.0 scanning...
[DEBUG]  PCI: pci_scan_bus for bus 02
[DEBUG]  PCI: 02:00.0 [10ec/5227] enabled
[INFO ]  Enabling Common Clock Configuration
[INFO ]  ASPM: Enabled L0s and L1
[INFO ]  PCIe: Max_Payload_Size adjusted to 128
[INFO ]  PCI: 02:00.0: Enabled LTR
[DEBUG]  scan_bus: bus PCI: 00:1c.0 finished in 0 msecs
[DEBUG]  PCI: 00:1c.1 scanning...
[DEBUG]  PCI: pci_scan_bus for bus 03
[DEBUG]  PCI: 03:00.0 [8086/08b2] enabled
[INFO ]  Enabling Common Clock Configuration
[INFO ]  ASPM: Enabled L1
[INFO ]  PCIe: Max_Payload_Size adjusted to 128
[INFO ]  PCI: 03:00.0: Enabled LTR
[DEBUG]  scan_bus: bus PCI: 00:1c.1 finished in 0 msecs
[DEBUG]  PCI: 00:1f.0 scanning...
[DEBUG]  No CMOS option 'touchpad'.
[INFO ]  PMH7: ID 05 Revision 12
[DEBUG]  PNP: 00ff.1 enabled
[INFO ]  H8: EC Firmware ID GLHT30WW-3.23, Version 3.01B
[DEBUG]  No CMOS option 'bluetooth'.
[INFO ]  H8: WWAN detection not implemented. Assuming WWAN installed
[DEBUG]  No CMOS option 'wwan'.
[DEBUG]  PNP: 00ff.2 enabled
[DEBUG]  PNP: 0c31.0 enabled
[DEBUG]  scan_bus: bus PCI: 00:1f.0 finished in 3 msecs
[DEBUG]  PCI: 00:1f.3 scanning...
[DEBUG]  scan_bus: bus PCI: 00:1f.3 finished in 0 msecs
[DEBUG]  scan_bus: bus DOMAIN: 0000 finished in 3 msecs
[DEBUG]  scan_bus: bus Root Device finished in 3 msecs
[INFO ]  done
[DEBUG]  BS: BS_DEV_ENUMERATE run times (exec / console): 4 / 0 ms
[DEBUG]  found VGA at PCI: 00:02.0
[DEBUG]  Setting up VGA for PCI: 00:02.0
[DEBUG]  Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000
[DEBUG]  Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
[INFO ]  Allocating resources...
[INFO ]  Reading resources...
[DEBUG]  mc_add_fixed_mmio_resources: Adding MCHBAR @ 48 0xfed10000-0xfed17fff.
[DEBUG]  mc_add_fixed_mmio_resources: Adding DMIBAR @ 68 0xfed18000-0xfed18fff.
[DEBUG]  mc_add_fixed_mmio_resources: Adding EPBAR @ 40 0xfed19000-0xfed19fff.
[DEBUG]  mc_add_fixed_mmio_resources: Adding GDXCBAR @ 5420 0xfed84000-0xfed84fff.
[DEBUG]  mc_add_fixed_mmio_resources: Adding EDRAMBAR @ 5408 0xfed80000-0xfed83fff.
[DEBUG]  Adding PCIe enhanced config space BAR 0xf0000000-0xf4000000.
[DEBUG]  MC MAP: TOM: 0x400000000
[DEBUG]  MC MAP: TOUUD: 0x47de00000
[DEBUG]  MC MAP: MESEG_BASE: 0x7ffff00000
[DEBUG]  MC MAP: MESEG_LIMIT: 0xfffff
[DEBUG]  MC MAP: REMAP_BASE: 0x400000000
[DEBUG]  MC MAP: REMAP_LIMIT: 0x47ddfffff
[DEBUG]  MC MAP: TOLUD: 0x82200000
[DEBUG]  MC MAP: BGSM: 0x80000000
[DEBUG]  MC MAP: BDSM: 0x80200000
[DEBUG]  MC MAP: TSEGMB: 0x7f800000
[DEBUG]  MC MAP: GGC: 0x209
[DEBUG]  MC MAP: DPR: 0x7f800001
[INFO ]  Available memory above 4GB: 14302M
[ERROR]  PNP: 00ff.1 missing read_resources
[ERROR]  PNP: 00ff.2 missing read_resources
[INFO ]  Done reading resources.
[INFO ]  === Resource allocator: DOMAIN: 0000 - Pass 1 (relative placement) ===
[DEBUG]   PCI: 00:1c.0 io: size: 0 align: 12 gran: 12 limit: ffff
[DEBUG]   PCI: 00:1c.0 io: size: 0 align: 12 gran: 12 limit: ffff done
[DEBUG]   PCI: 00:1c.0 mem: size: 0 align: 20 gran: 20 limit: ffffffff
[DEBUG]    PCI: 02:00.0 10 *  [0x0 - 0xfff] mem
[DEBUG]   PCI: 00:1c.0 mem: size: 100000 align: 20 gran: 20 limit: ffffffff done
[DEBUG]   PCI: 00:1c.0 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff
[DEBUG]   PCI: 00:1c.0 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff done
[DEBUG]   PCI: 00:1c.1 io: size: 0 align: 12 gran: 12 limit: ffff
[DEBUG]   PCI: 00:1c.1 io: size: 0 align: 12 gran: 12 limit: ffff done
[DEBUG]   PCI: 00:1c.1 mem: size: 0 align: 20 gran: 20 limit: ffffffff
[DEBUG]    PCI: 03:00.0 10 *  [0x0 - 0x1fff] mem
[DEBUG]   PCI: 00:1c.1 mem: size: 100000 align: 20 gran: 20 limit: ffffffff done
[DEBUG]   PCI: 00:1c.1 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff
[DEBUG]   PCI: 00:1c.1 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff done
[INFO ]  === Resource allocator: DOMAIN: 0000 - Pass 2 (allocating resources) ===
[DEBUG]  DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff
[DEBUG]   avoid_fixed_resources: PCI: 00:1f.0 00 base 00000000 limit 00000fff io (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:1f.0 84 base 00001600 limit 0000167f io (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:1f.0 88 base 000015e0 limit 000015ef io (fixed)
[DEBUG]   avoid_fixed_resources: PNP: 00ff.1 77 base 000015e0 limit 000015ef io (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:1f.3 20 base 00000400 limit 0000041f io (fixed)
[INFO ]   DOMAIN: 0000: Resource ranges:
[INFO ]   * Base: 1000, Size: 5e0, Tag: 100
[INFO ]   * Base: 15f0, Size: 10, Tag: 100
[INFO ]   * Base: 1680, Size: e980, Tag: 100
[DEBUG]    PCI: 00:02.0 20 *  [0x1000 - 0x103f] limit: 103f io
[DEBUG]    PCI: 00:19.0 18 *  [0x1040 - 0x105f] limit: 105f io
[DEBUG]    PCI: 00:1f.2 20 *  [0x1060 - 0x107f] limit: 107f io
[DEBUG]    PCI: 00:1f.2 10 *  [0x1080 - 0x1087] limit: 1087 io
[DEBUG]    PCI: 00:1f.2 18 *  [0x1088 - 0x108f] limit: 108f io
[DEBUG]    PCI: 00:1f.2 14 *  [0x1090 - 0x1093] limit: 1093 io
[DEBUG]    PCI: 00:1f.2 1c *  [0x1094 - 0x1097] limit: 1097 io
[DEBUG]  DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff done
[DEBUG]  DOMAIN: 0000 mem: base: 7f800000 size: 0 align: 0 gran: 0 limit: fdffffff
[DEBUG]  DOMAIN: 0000 mem: base: 100000000 size: 0 align: 0 gran: 0 limit: 7fffffffff
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 48 base fed10000 limit fed17fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 68 base fed18000 limit fed18fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 40 base fed19000 limit fed19fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 5420 base fed84000 limit fed84fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 5408 base fed80000 limit fed83fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 60 base f0000000 limit f3ffffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 00 base fed90000 limit fed90fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 01 base fed91000 limit fed91fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 02 base 00000000 limit 0009ffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 03 base 000c0000 limit 7f7fffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 04 base 7f800000 limit 7fffffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 05 base 80000000 limit 821fffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 06 base 100000000 limit 47ddfffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 07 base 000a0000 limit 000bffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 08 base 000c0000 limit 000fffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:1f.0 31fe base fec00000 limit ffffffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PNP: 0c31.0 00 base fed40000 limit fed44fff mem (fixed)
[INFO ]   DOMAIN: 0000: Resource ranges:
[INFO ]   * Base: 82200000, Size: 6de00000, Tag: 200
[INFO ]   * Base: f4000000, Size: a000000, Tag: 200
[INFO ]   * Base: 47de00000, Size: 7b82200000, Tag: 200
[DEBUG]    PCI: 00:02.0 18 *  [0x90000000 - 0x9fffffff] limit: 9fffffff prefmem
[DEBUG]    PCI: 00:02.0 10 *  [0x82400000 - 0x827fffff] limit: 827fffff mem
[DEBUG]    PCI: 00:1c.0 20 *  [0x82200000 - 0x822fffff] limit: 822fffff mem
[DEBUG]    PCI: 00:1c.1 20 *  [0x82300000 - 0x823fffff] limit: 823fffff mem
[DEBUG]    PCI: 00:19.0 10 *  [0x82800000 - 0x8281ffff] limit: 8281ffff mem
[DEBUG]    PCI: 00:14.0 10 *  [0x82820000 - 0x8282ffff] limit: 8282ffff mem
[DEBUG]    PCI: 00:04.0 10 *  [0x82830000 - 0x82837fff] limit: 82837fff mem
[DEBUG]    PCI: 00:03.0 10 *  [0x82838000 - 0x8283bfff] limit: 8283bfff mem
[DEBUG]    PCI: 00:1b.0 10 *  [0x8283c000 - 0x8283ffff] limit: 8283ffff mem
[DEBUG]    PCI: 00:19.0 14 *  [0x82840000 - 0x82840fff] limit: 82840fff mem
[DEBUG]    PCI: 00:1f.2 24 *  [0x82841000 - 0x828417ff] limit: 828417ff mem
[DEBUG]    PCI: 00:1a.0 10 *  [0x82842000 - 0x828423ff] limit: 828423ff mem
[DEBUG]    PCI: 00:1d.0 10 *  [0x82843000 - 0x828433ff] limit: 828433ff mem
[DEBUG]    PCI: 00:1f.3 10 *  [0x82844000 - 0x828440ff] limit: 828440ff mem
[DEBUG]    PCI: 00:16.0 10 *  [0x82845000 - 0x8284500f] limit: 8284500f mem
[DEBUG]  DOMAIN: 0000 mem: base: 7f800000 size: 0 align: 0 gran: 0 limit: fdffffff done
[DEBUG]  DOMAIN: 0000 mem: base: 100000000 size: 0 align: 0 gran: 0 limit: 7fffffffff done
[DEBUG]    PCI: 02:00.0 10 *  [0x82200000 - 0x82200fff] limit: 82200fff mem
[DEBUG]    PCI: 03:00.0 10 *  [0x82300000 - 0x82301fff] limit: 82301fff mem
[INFO ]  === Resource allocator: DOMAIN: 0000 - resource allocation complete ===
[DEBUG]  PCI: 00:01.1 1c <- [0x000000000000ffff - 0x000000000000fffe] size 0x00000000 gran 0x0c bus 01 io
[DEBUG]  PCI: 00:01.1 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 bus 01 prefmem
[DEBUG]  PCI: 00:01.1 20 <- [0x00000000ffffffff - 0x00000000fffffffe] size 0x00000000 gran 0x14 bus 01 mem
[DEBUG]  PCI: 00:02.0 10 <- [0x0000000082400000 - 0x00000000827fffff] size 0x00400000 gran 0x16 mem64
[DEBUG]  PCI: 00:02.0 18 <- [0x0000000090000000 - 0x000000009fffffff] size 0x10000000 gran 0x1c prefmem64
[DEBUG]  PCI: 00:02.0 20 <- [0x0000000000001000 - 0x000000000000103f] size 0x00000040 gran 0x06 io
[DEBUG]  PCI: 00:03.0 10 <- [0x0000000082838000 - 0x000000008283bfff] size 0x00004000 gran 0x0e mem64
[DEBUG]  PCI: 00:04.0 10 <- [0x0000000082830000 - 0x0000000082837fff] size 0x00008000 gran 0x0f mem64
[DEBUG]  PCI: 00:14.0 10 <- [0x0000000082820000 - 0x000000008282ffff] size 0x00010000 gran 0x10 mem64
[DEBUG]  PCI: 00:16.0 10 <- [0x0000000082845000 - 0x000000008284500f] size 0x00000010 gran 0x04 mem64
[DEBUG]  PCI: 00:19.0 10 <- [0x0000000082800000 - 0x000000008281ffff] size 0x00020000 gran 0x11 mem
[DEBUG]  PCI: 00:19.0 14 <- [0x0000000082840000 - 0x0000000082840fff] size 0x00001000 gran 0x0c mem
[DEBUG]  PCI: 00:19.0 18 <- [0x0000000000001040 - 0x000000000000105f] size 0x00000020 gran 0x05 io
[DEBUG]  PCI: 00:1a.0 10 <- [0x0000000082842000 - 0x00000000828423ff] size 0x00000400 gran 0x0a mem
[DEBUG]  PCI: 00:1b.0 10 <- [0x000000008283c000 - 0x000000008283ffff] size 0x00004000 gran 0x0e mem64
[DEBUG]  PCI: 00:1c.0 1c <- [0x000000000000ffff - 0x000000000000fffe] size 0x00000000 gran 0x0c bus 02 io
[DEBUG]  PCI: 00:1c.0 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 bus 02 prefmem
[DEBUG]  PCI: 00:1c.0 20 <- [0x0000000082200000 - 0x00000000822fffff] size 0x00100000 gran 0x14 bus 02 mem
[DEBUG]  PCI: 02:00.0 10 <- [0x0000000082200000 - 0x0000000082200fff] size 0x00001000 gran 0x0c mem
[DEBUG]  PCI: 00:1c.1 1c <- [0x000000000000ffff - 0x000000000000fffe] size 0x00000000 gran 0x0c bus 03 io
[DEBUG]  PCI: 00:1c.1 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 bus 03 prefmem
[DEBUG]  PCI: 00:1c.1 20 <- [0x0000000082300000 - 0x00000000823fffff] size 0x00100000 gran 0x14 bus 03 mem
[DEBUG]  PCI: 03:00.0 10 <- [0x0000000082300000 - 0x0000000082301fff] size 0x00002000 gran 0x0d mem64
[DEBUG]  PCI: 00:1d.0 10 <- [0x0000000082843000 - 0x00000000828433ff] size 0x00000400 gran 0x0a mem
[ERROR]  PNP: 00ff.1 missing set_resources
[ERROR]  PNP: 00ff.2 missing set_resources
[DEBUG]  PCI: 00:1f.2 10 <- [0x0000000000001080 - 0x0000000000001087] size 0x00000008 gran 0x03 io
[DEBUG]  PCI: 00:1f.2 14 <- [0x0000000000001090 - 0x0000000000001093] size 0x00000004 gran 0x02 io
[DEBUG]  PCI: 00:1f.2 18 <- [0x0000000000001088 - 0x000000000000108f] size 0x00000008 gran 0x03 io
[DEBUG]  PCI: 00:1f.2 1c <- [0x0000000000001094 - 0x0000000000001097] size 0x00000004 gran 0x02 io
[DEBUG]  PCI: 00:1f.2 20 <- [0x0000000000001060 - 0x000000000000107f] size 0x00000020 gran 0x05 io
[DEBUG]  PCI: 00:1f.2 24 <- [0x0000000082841000 - 0x00000000828417ff] size 0x00000800 gran 0x0b mem
[DEBUG]  PCI: 00:1f.3 10 <- [0x0000000082844000 - 0x00000000828440ff] size 0x00000100 gran 0x08 mem64
[INFO ]  Done setting resources.
[INFO ]  Done allocating resources.
[DEBUG]  BS: BS_DEV_RESOURCES run times (exec / console): 2 / 0 ms
[INFO ]  Enabling resources...
[DEBUG]  PCI: 00:00.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:00.0 cmd <- 06
[DEBUG]  PCI: 00:01.1 bridge ctrl <- 0013
[DEBUG]  PCI: 00:01.1 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:01.1 cmd <- 00
[DEBUG]  PCI: 00:02.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:02.0 cmd <- 03
[DEBUG]  PCI: 00:03.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:03.0 cmd <- 02
[DEBUG]  PCI: 00:04.0 cmd <- 02
[DEBUG]  PCI: 00:14.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:14.0 cmd <- 102
[DEBUG]  PCI: 00:16.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:16.0 cmd <- 02
[DEBUG]  PCI: 00:19.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:19.0 cmd <- 103
[DEBUG]  PCI: 00:1a.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1a.0 cmd <- 102
[DEBUG]  PCI: 00:1b.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1b.0 cmd <- 102
[DEBUG]  PCI: 00:1c.0 bridge ctrl <- 0013
[DEBUG]  PCI: 00:1c.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1c.0 cmd <- 06
[DEBUG]  PCI: 00:1c.1 bridge ctrl <- 0013
[DEBUG]  PCI: 00:1c.1 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1c.1 cmd <- 06
[DEBUG]  PCI: 00:1d.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1d.0 cmd <- 102
[DEBUG]  PCI: 00:1f.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1f.0 cmd <- 107
[DEBUG]  PCI: 00:1f.2 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1f.2 cmd <- 103
[DEBUG]  PCI: 00:1f.3 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1f.3 cmd <- 103
[DEBUG]  PCI: 02:00.0 cmd <- 02
[DEBUG]  PCI: 03:00.0 cmd <- 02
[INFO ]  done.
[INFO ]  Initializing devices...
[DEBUG]  CPU_CLUSTER: 0 init
[DEBUG]  MTRR: Physical address space:
[DEBUG]  0x0000000000000000 - 0x000000000009ffff size 0x000a0000 type 6
[DEBUG]  0x00000000000a0000 - 0x00000000000bffff size 0x00020000 type 0
[DEBUG]  0x00000000000c0000 - 0x000000007fffffff size 0x7ff40000 type 6
[DEBUG]  0x0000000080000000 - 0x000000008fffffff size 0x10000000 type 0
[DEBUG]  0x0000000090000000 - 0x000000009fffffff size 0x10000000 type 1
[DEBUG]  0x00000000a0000000 - 0x00000000ffffffff size 0x60000000 type 0
[DEBUG]  0x0000000100000000 - 0x000000047ddfffff size 0x37de00000 type 6
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x250 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x258 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x259 0x0000000000000000
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x268 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x269 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26a 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26b 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26c 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26d 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26e 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26f 0x0606060606060606
[DEBUG]  apic_id 0x0 setup mtrr for CPU physical address size: 39 bits
[DEBUG]  MTRR: default type WB/UC MTRR counts: 4/5.
[DEBUG]  MTRR: WB selected as default type.
[DEBUG]  MTRR: 0 base 0x0000000080000000 mask 0x0000007ff0000000 type 0
[DEBUG]  MTRR: 1 base 0x0000000090000000 mask 0x0000007ff0000000 type 1
[DEBUG]  MTRR: 2 base 0x00000000a0000000 mask 0x0000007fe0000000 type 0
[DEBUG]  MTRR: 3 base 0x00000000c0000000 mask 0x0000007fc0000000 type 0

[DEBUG]  MTRR check
[DEBUG]  Fixed MTRRs   : Enabled
[DEBUG]  Variable MTRRs: Enabled

[DEBUG]  Initializing VR config.
[DEBUG]  CPU has 2 cores, 4 threads enabled.
[DEBUG]  Setting up SMI for CPU
[INFO ]  Will perform SMM setup.
[INFO ]  CBFS: Found 'cpu_microcode_blob.bin' @0xc500 size 0xf800 in mcache @0x7f7dd0ac
[DEBUG]  microcode: sig=0x306c3 pf=0x10 revision=0x28
[INFO ]  CPU: Intel(R) Core(TM) i7-4600M CPU @ 2.90GHz.
[INFO ]  LAPIC 0x0 in XAPIC mode.
[DEBUG]  CPU: APIC: 00 enabled
[DEBUG]  CPU: APIC: 01 enabled
[DEBUG]  CPU: APIC: 02 enabled
[DEBUG]  CPU: APIC: 03 enabled
[DEBUG]  Loading module at 0x00030000 with entry 0x00030000. filesize: 0x178 memsize: 0x178
[DEBUG]  Processing 16 relocs. Offset value of 0x00030000
[DEBUG]  Attempting to start 3 APs
[DEBUG]  Waiting for 10ms after sending INIT.
[DEBUG]  Waiting for SIPI to complete...
[DEBUG]  done.
[DEBUG]  Waiting for SIPI to complete...
[INFO ]  LAPIC 0x1 in XAPIC mode.
[DEBUG]  done.
[INFO ]  AP: slot 1 apic_id 1, MCU rev: 0x00000028
[INFO ]  LAPIC 0x2 in XAPIC mode.
[INFO ]  LAPIC 0x3 in XAPIC mode.
[INFO ]  AP: slot 2 apic_id 2, MCU rev: 0x00000028
[INFO ]  AP: slot 3 apic_id 3, MCU rev: 0x00000028
[DEBUG]  Loading module at 0x00038000 with entry 0x00038000. filesize: 0x1a0 memsize: 0x1a0
[DEBUG]  Processing 9 relocs. Offset value of 0x00038000
[DEBUG]  smm_module_setup_stub: stack_top = 0x7f801000
[DEBUG]  smm_module_setup_stub: per cpu stack_size = 0x400
[DEBUG]  smm_module_setup_stub: runtime.smm_size = 0x10000
[DEBUG]  SMM Module: stub loaded at 38000. Will call 0x7f7a0c2a
[DEBUG]  Installing permanent SMM handler to 0x7f800000
[DEBUG]  HANDLER      [0x7fafb000-0x7faff750]

[DEBUG]  CPU 0
[DEBUG]    ss0        [0x7fafac00-0x7fafb000]
[DEBUG]    stub0      [0x7faf3000-0x7faf31a0]

[DEBUG]  CPU 1
[DEBUG]    ss1        [0x7fafa800-0x7fafac00]
[DEBUG]    stub1      [0x7faf2c00-0x7faf2da0]

[DEBUG]  CPU 2
[DEBUG]    ss2        [0x7fafa400-0x7fafa800]
[DEBUG]    stub2      [0x7faf2800-0x7faf29a0]

[DEBUG]  CPU 3
[DEBUG]    ss3        [0x7fafa000-0x7fafa400]
[DEBUG]    stub3      [0x7faf2400-0x7faf25a0]

[DEBUG]  stacks       [0x7f800000-0x7f801000]
[DEBUG]  Loading module at 0x7fafb000 with entry 0x7fafbeff. filesize: 0x4628 memsize: 0x4750
[DEBUG]  Processing 270 relocs. Offset value of 0x7fafb000
[DEBUG]  Loading module at 0x7faf3000 with entry 0x7faf3000. filesize: 0x1a0 memsize: 0x1a0
[DEBUG]  Processing 9 relocs. Offset value of 0x7faf3000
[DEBUG]  smm_module_setup_stub: stack_top = 0x7f801000
[DEBUG]  smm_module_setup_stub: per cpu stack_size = 0x400
[DEBUG]  smm_module_setup_stub: runtime.smm_size = 0x300000
[DEBUG]  SMM Module: placing smm entry code at 7faf2c00,  cpu # 0x1
[DEBUG]  SMM Module: placing smm entry code at 7faf2800,  cpu # 0x2
[DEBUG]  SMM Module: placing smm entry code at 7faf2400,  cpu # 0x3
[DEBUG]  SMM Module: stub loaded at 7faf3000. Will call 0x7fafbeff
[DEBUG]  SMI_STS: MCSMI 
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x7faeb000, cpu = 0
[DEBUG]  In relocation handler: CPU 0
[DEBUG]  New SMBASE=0x7faeb000 IEDBASE=0x7fc00000
[DEBUG]  Writing SMRR. base = 0x7f800006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x7faeac00, cpu = 1
[DEBUG]  In relocation handler: CPU 1
[DEBUG]  New SMBASE=0x7faeac00 IEDBASE=0x7fc00000
[DEBUG]  Writing SMRR. base = 0x7f800006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x7faea400, cpu = 3
[DEBUG]  In relocation handler: CPU 3
[DEBUG]  New SMBASE=0x7faea400 IEDBASE=0x7fc00000
[DEBUG]  Writing SMRR. base = 0x7f800006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x7faea800, cpu = 2
[DEBUG]  In relocation handler: CPU 2
[DEBUG]  New SMBASE=0x7faea800 IEDBASE=0x7fc00000
[DEBUG]  Writing SMRR. base = 0x7f800006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  Initializing CPU #0
[DEBUG]  CPU: vendor Intel device 306c3
[DEBUG]  CPU: family 06, model 3c, stepping 03
[DEBUG]  IA32_FEATURE_CONTROL already locked; VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL already locked
[DEBUG]  cpu: energy policy set to 6
[INFO ]  Turbo is available but hidden
[INFO ]  Turbo is available and visible
[INFO ]  CPU #0 initialized
[INFO ]  Initializing CPU #1
[INFO ]  Initializing CPU #2
[INFO ]  Initializing CPU #3
[DEBUG]  CPU: vendor Intel device 306c3
[DEBUG]  CPU: family 06, model 3c, stepping 03
[DEBUG]  CPU: vendor Intel device 306c3
[DEBUG]  CPU: family 06, model 3c, stepping 03
[DEBUG]  CPU: vendor Intel device 306c3
[DEBUG]  CPU: family 06, model 3c, stepping 03
[DEBUG]  IA32_FEATURE_CONTROL already locked; VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL already locked
[DEBUG]  IA32_FEATURE_CONTROL already locked; VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL already locked; VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL already locked
[DEBUG]  IA32_FEATURE_CONTROL already locked
[DEBUG]  cpu: energy policy set to 6
[INFO ]  CPU #2 initialized
[DEBUG]  cpu: energy policy set to 6
[INFO ]  CPU #1 initialized
[DEBUG]  cpu: energy policy set to 6
[INFO ]  CPU #3 initialized
[INFO ]  bsp_do_flight_plan done after 2 msecs.
[DEBUG]  CPU: frequency set to 3600
[DEBUG]  Enabling SMIs.
[DEBUG]  Locking SMM.
[DEBUG]  CPU_CLUSTER: 0 init finished in 12 msecs
[DEBUG]  PCI: 00:00.0 init
[DEBUG]  Disabling PEG12.
[DEBUG]  Disabling PEG10.
[DEBUG]  Disabling "device 7".
[DEBUG]  Set BIOS_RESET_CPL
[DEBUG]  CPU TDP: 37 Watts
[DEBUG]  PCI: 00:00.0 init finished in 1 msecs
[DEBUG]  PCI: 00:01.1 init
[DEBUG]  PCI: 00:01.1 init finished in 0 msecs
[DEBUG]  PCI: 00:02.0 init
[INFO ]  CBFS: Found 'vbt.bin' @0x3e480 size 0x582 in mcache @0x7f7dd204
[INFO ]  Found a VBT of 4608 bytes after decompression
[INFO ]  GMA: Found VBT in CBFS
[INFO ]  GMA: Found valid VBT in CBFS
[DEBUG]  GT Power Management Init
[INFO ]  GMA: Setting backlight PWM frequency to 135MHz / 128 / 4794 = 220Hz
[INFO ]  framebuffer_info: bytes_per_line: 4096, bits_per_pixel: 32
[INFO ]                     x_res x y_res: 1024 x 768, size: 3145728 at 0x90000000
[DEBUG]  GT Power Management Init (post VBIOS)
[DEBUG]  PCI: 00:02.0 init finished in 223 msecs
[DEBUG]  PCI: 00:03.0 init
[DEBUG]  Mini-HD: base = 0x82838000
[DEBUG]  azalia_audio: Initializing codec #0
[DEBUG]  azalia_audio: codec viddid: 80862807
[DEBUG]  azalia_audio: verb_size: 16
[DEBUG]  azalia_audio: verb loaded.
[DEBUG]  PCI: 00:03.0 init finished in 3 msecs
[DEBUG]  PCI: 00:04.0 init
[DEBUG]  PCI: 00:04.0 init finished in 0 msecs
[DEBUG]  PCI: 00:14.0 init
[DEBUG]  PCI: 00:14.0 init finished in 0 msecs
[DEBUG]  PCI: 00:16.0 init
[DEBUG]  ME: FW Partition Table      : OK
[DEBUG]  ME: Bringup Loader Failure  : NO
[DEBUG]  ME: Firmware Init Complete  : NO
[DEBUG]  ME: Manufacturing Mode      : YES
[DEBUG]  ME: Boot Options Present    : NO
[DEBUG]  ME: Update In Progress      : NO
[DEBUG]  ME: Current Working State   : Initializing
[DEBUG]  ME: Current Operation State : Bring up
[DEBUG]  ME: Current Operation Mode  : Debug
[DEBUG]  ME: Error Code              : No Error
[DEBUG]  ME: Progress Phase          : BUP Phase
[DEBUG]  ME: Power Management Event  : Pseudo-global reset
[DEBUG]  ME: Progress Phase State    : 0x4d
[CRIT ]  intel_me_path: mbp is not ready!
[NOTE ]  ME: BIOS path: Error
[ERROR]  ME: MBP not ready
[DEBUG]  PCI: 00:16.0 init finished in 0 msecs
[DEBUG]  PCI: 00:19.0 init
[DEBUG]  PCI: 00:19.0 init finished in 0 msecs
[DEBUG]  PCI: 00:1a.0 init
[DEBUG]  EHCI: Setting up controller.. done.
[DEBUG]  PCI: 00:1a.0 init finished in 0 msecs
[DEBUG]  PCI: 00:1b.0 init
[DEBUG]  Azalia: base = 0x8283c000
[DEBUG]  Azalia: codec_mask = 01
[DEBUG]  azalia_audio: Initializing codec #0
[DEBUG]  azalia_audio: codec viddid: 10ec0292
[DEBUG]  azalia_audio: verb_size: 128
[DEBUG]  azalia_audio: verb loaded.
[DEBUG]  PCI: 00:1b.0 init finished in 7 msecs
[DEBUG]  PCI: 00:1c.0 init
[DEBUG]  Initializing PCH PCIe bridge.
[DEBUG]  PCI: 00:1c.0 init finished in 0 msecs
[DEBUG]  PCI: 00:1c.1 init
[DEBUG]  Initializing PCH PCIe bridge.
[DEBUG]  PCI: 00:1c.1 init finished in 0 msecs
[DEBUG]  PCI: 00:1d.0 init
[DEBUG]  EHCI: Setting up controller.. done.
[DEBUG]  PCI: 00:1d.0 init finished in 0 msecs
[DEBUG]  PCI: 00:1f.0 init
[DEBUG]  pch: lpc_init
[DEBUG]  IOAPIC: Initializing IOAPIC at 0xfec00000
[DEBUG]  IOAPIC: ID = 0x00
[DEBUG]  IOAPIC: 24 interrupts
[DEBUG]  IOAPIC: Clearing IOAPIC at 0xfec00000
[DEBUG]  IOAPIC: Bootstrap Processor Local APIC = 0x00
[INFO ]  Set power off after power failure.
[INFO ]  NMI sources enabled.
[DEBUG]  LynxPoint H PM init
[DEBUG]  RTC: failed = 0x0
[DEBUG]  RTC Init
[DEBUG]  apm_control: Disabling ACPI.
[DEBUG]  APMC done.
[DEBUG]  PCI: 00:1f.0 init finished in 0 msecs
[DEBUG]  PCI: 00:1f.2 init
[DEBUG]  SATA: Initializing...
[DEBUG]  SATA: Controller in AHCI mode.
[DEBUG]  ABAR: 0x82841000
[DEBUG]  PCI: 00:1f.2 init finished in 0 msecs
[DEBUG]  PCI: 00:1f.3 init
[DEBUG]  PCI: 00:1f.3 init finished in 0 msecs
[DEBUG]  PCI: 02:00.0 init
[DEBUG]  PCI: 02:00.0 init finished in 0 msecs
[DEBUG]  PCI: 03:00.0 init
[DEBUG]  PCI: 03:00.0 init finished in 0 msecs
[DEBUG]  PNP: 00ff.2 init
[DEBUG]  PNP: 00ff.2 init finished in 0 msecs
[INFO ]  Devices initialized
[DEBUG]  BS: BS_DEV_INIT run times (exec / console): 249 / 0 ms
[DEBUG]  FMAP: area SMMSTORE found @ 810000 (262144 bytes)
[DEBUG]  flash size 0x2800000 bytes
[INFO ]  SF: Detected 00 0000 with sector size 0x1000, total 0x2800000
[ERROR]  SF size 0x2800000 does not correspond to CONFIG_ROM_SIZE 0xc00000!!
[DEBUG]  smm store: 4 # blocks with size 0x10000
[INFO ]  SMMSTORE: Setting up SMI handler
[INFO ]  Found TPM ST33ZP24 by ST Microelectronics
[DEBUG]  TPM: Startup
[DEBUG]  TPM: command 0x99 returned 0x0
[DEBUG]  TPM: Asserting physical presence
[DEBUG]  TPM: command 0x4000000a returned 0x0
[DEBUG]  TPM: command 0x65 returned 0x0
[DEBUG]  TPM: flags disable=0, deactivated=0, nvlocked=1
[INFO ]  TPM: setup succeeded
[DEBUG]  BS: BS_DEV_INIT exit times (exec / console): 53 / 0 ms
[INFO ]  Finalize devices...
[DEBUG]  PCI: 00:00.0 final
[DEBUG]  PCI: 00:16.0 final
[INFO ]  ME: MBP cleared
[DEBUG]  PCI: 00:1b.0 final
[DEBUG]  PCI: 00:1f.0 final
[DEBUG]  apm_control: Finalizing SMM.
[DEBUG]  APMC done.
[INFO ]  Devices finalized
[INFO ]  CBFS: Found 'fallback/dsdt.aml' @0x3adc0 size 0x367a in mcache @0x7f7dd1d8
[WARN ]  CBFS: 'fallback/slic' not found.
[INFO ]  ACPI: Writing ACPI tables at 7f730000.
[DEBUG]  ACPI:    * FACS
[DEBUG]  ACPI:    * DSDT
[DEBUG]  ACPI:    * FADT
[DEBUG]  ACPI: added table 1/32, length now 40
[DEBUG]  ACPI:     * SSDT
[DEBUG]  Found 1 CPU(s) with 4 core(s) each.
[DEBUG]  PSS: 2901MHz power 37000 control 0x2400 status 0x2400
[DEBUG]  PSS: 2900MHz power 37000 control 0x1d00 status 0x1d00
[DEBUG]  PSS: 2400MHz power 28854 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 22943 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 17471 control 0x1000 status 0x1000
[DEBUG]  PSS: 1200MHz power 12469 control 0xc00 status 0xc00
[DEBUG]  PSS: 800MHz power 7885 control 0x800 status 0x800
[DEBUG]  PSS: 2901MHz power 37000 control 0x2400 status 0x2400
[DEBUG]  PSS: 2900MHz power 37000 control 0x1d00 status 0x1d00
[DEBUG]  PSS: 2400MHz power 28854 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 22943 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 17471 control 0x1000 status 0x1000
[DEBUG]  PSS: 1200MHz power 12469 control 0xc00 status 0xc00
[DEBUG]  PSS: 800MHz power 7885 control 0x800 status 0x800
[DEBUG]  PSS: 2901MHz power 37000 control 0x2400 status 0x2400
[DEBUG]  PSS: 2900MHz power 37000 control 0x1d00 status 0x1d00
[DEBUG]  PSS: 2400MHz power 28854 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 22943 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 17471 control 0x1000 status 0x1000
[DEBUG]  PSS: 1200MHz power 12469 control 0xc00 status 0xc00
[DEBUG]  PSS: 800MHz power 7885 control 0x800 status 0x800
[DEBUG]  PSS: 2901MHz power 37000 control 0x2400 status 0x2400
[DEBUG]  PSS: 2900MHz power 37000 control 0x1d00 status 0x1d00
[DEBUG]  PSS: 2400MHz power 28854 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 22943 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 17471 control 0x1000 status 0x1000
[DEBUG]  PSS: 1200MHz power 12469 control 0xc00 status 0xc00
[DEBUG]  PSS: 800MHz power 7885 control 0x800 status 0x800
[DEBUG]  Generating ACPI PIRQ entries
[INFO ]  ACPI:    * H8
[INFO ]  H8: BDC detection not implemented. Assuming BDC installed
[INFO ]  H8: WWAN detection not implemented. Assuming WWAN installed
[INFO ]  \_SB_.PCI0.TPM: LPC TPM PNP: 0c31.0
[DEBUG]  ACPI: added table 2/32, length now 44
[DEBUG]  ACPI:    * MCFG
[DEBUG]  ACPI: added table 3/32, length now 48
[DEBUG]  ACPI:    * TCPA
[DEBUG]  TCPA log created at 0x7f720000
[DEBUG]  ACPI: added table 4/32, length now 52
[DEBUG]  ACPI:    * MADT
[DEBUG]  IOAPIC: 24 interrupts
[DEBUG]  ACPI: added table 5/32, length now 56
[DEBUG]  ACPI:    * SPCR
[DEBUG]  current = 7f7352c0
[DEBUG]  ACPI:    * DMAR
[DEBUG]  ACPI: added table 6/32, length now 60
[DEBUG]  ACPI:    * HPET
[DEBUG]  ACPI: added table 7/32, length now 64
[DEBUG]  current = 7f7353c0
[INFO ]  ACPI: done.
[DEBUG]  ACPI tables: 21440 bytes.
[DEBUG]  smbios_write_tables: 7f718000
[DEBUG]  SMBIOS firmware version is set to coreboot_version: '4.20-521-g0a810a2881'
[INFO ]  Create SMBIOS type 16
[INFO ]  Create SMBIOS type 17
[INFO ]  Create SMBIOS type 20
[INFO ]  PCI: 03:00.0 (unknown)
[DEBUG]  SMBIOS tables: 1119 bytes.
[DEBUG]  Writing table forward entry at 0x00000500
[DEBUG]  Wrote coreboot table at: 0x00000500, 0x10 bytes, checksum 4069
[DEBUG]  Writing coreboot table at 0x7f754000
[INFO ]  CBFS: Found 'cmos_layout.bin' @0x3eb80 size 0x510 in mcache @0x7f7dd25c
[DEBUG]   0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
[DEBUG]   1. 0000000000001000-000000000009ffff: RAM
[DEBUG]   2. 00000000000a0000-00000000000fffff: RESERVED
[DEBUG]   3. 0000000000100000-000000007f717fff: RAM
[DEBUG]   4. 000000007f718000-000000007f780fff: CONFIGURATION TABLES
[DEBUG]   5. 000000007f781000-000000007f7cdfff: RAMSTAGE
[DEBUG]   6. 000000007f7ce000-000000007f7fffff: CONFIGURATION TABLES
[DEBUG]   7. 000000007f800000-00000000821fffff: RESERVED
[DEBUG]   8. 00000000f0000000-00000000f3ffffff: RESERVED
[DEBUG]   9. 00000000fed10000-00000000fed19fff: RESERVED
[DEBUG]  10. 00000000fed40000-00000000fed44fff: RESERVED
[DEBUG]  11. 00000000fed80000-00000000fed84fff: RESERVED
[DEBUG]  12. 00000000fed90000-00000000fed91fff: RESERVED
[DEBUG]  13. 0000000100000000-000000047ddfffff: RAM
[DEBUG]  Wrote coreboot table at: 0x7f754000, 0x95c bytes, checksum 875a
[DEBUG]  coreboot table: 2420 bytes.
[DEBUG]  IMD ROOT    0. 0x7f7ff000 0x00001000
[DEBUG]  IMD SMALL   1. 0x7f7fe000 0x00001000
[DEBUG]  CONSOLE     2. 0x7f7de000 0x00020000
[DEBUG]  RO MCACHE   3. 0x7f7dd000 0x00000378
[DEBUG]  TIME STAMP  4. 0x7f7dc000 0x00000910
[DEBUG]  MEM INFO    5. 0x7f7db000 0x000007a8
[DEBUG]  AFTER CAR   6. 0x7f7ce000 0x0000d000
[DEBUG]  RAMSTAGE    7. 0x7f780000 0x0004e000
[DEBUG]  SMM BACKUP  8. 0x7f770000 0x00010000
[DEBUG]  IGD OPREGION 9. 0x7f76c000 0x00003130
[DEBUG]  SMM COMBUFFER10. 0x7f75c000 0x00010000
[DEBUG]  COREBOOT   11. 0x7f754000 0x00008000
[DEBUG]  ACPI       12. 0x7f730000 0x00024000
[DEBUG]  TCPA TCGLOG13. 0x7f720000 0x00010000
[DEBUG]  SMBIOS     14. 0x7f718000 0x00008000
[DEBUG]  IMD small region:
[DEBUG]    IMD ROOT    0. 0x7f7fec00 0x00000400
[DEBUG]    FMAP        1. 0x7f7feae0 0x0000010a
[DEBUG]    ROMSTAGE    2. 0x7f7feac0 0x00000004
[DEBUG]    ROMSTG STCK 3. 0x7f7fea00 0x000000a8
[DEBUG]    ACPI GNVS   4. 0x7f7fe940 0x000000b0
[DEBUG]  BS: BS_WRITE_TABLES run times (exec / console): 4 / 0 ms
[INFO ]  CBFS: Found 'fallback/payload' @0x44c00 size 0x10e594 in mcache @0x7f7dd2c8
[DEBUG]  Checking segment from ROM address 0xffc94e2c
[DEBUG]  Checking segment from ROM address 0xffc94e48
[DEBUG]  Loading segment from ROM address 0xffc94e2c
[DEBUG]    code (compression=1)
[DEBUG]    New segment dstaddr 0x00800000 memsize 0x1000000 srcaddr 0xffc94e64 filesize 0x10e55c
[DEBUG]  Loading Segment: addr: 0x00800000 memsz: 0x0000000001000000 filesz: 0x000000000010e55c
[DEBUG]  using LZMA
[DEBUG]  Loading segment from ROM address 0xffc94e48
[DEBUG]    Entry Point 0x0080168c
[DEBUG]  BS: BS_PAYLOAD_LOAD run times (exec / console): 349 / 0 ms
[DEBUG]  ICH-NM10-PCH: watchdog disabled
[DEBUG]  Jumping to boot code at 0x0080168c(0x7f754000)


[NOTE ]  coreboot-4.20-521-g0a810a2881 Fri Jun 30 19:29:06 UTC 2023 x86_32 bootblock starting (log level: 7)...
[DEBUG]  FMAP: Found "FLASH" version 1.1 at 0x850000.
[DEBUG]  FMAP: base = 0xff400000 size = 0xc00000 #areas = 5
[DEBUG]  FMAP: area COREBOOT found @ 850200 (3866112 bytes)
[INFO ]  CBFS: mcache @0xff7c2e00 built for 16 files, used 0x378 of 0x4000 bytes
[WARN ]  CBFS: 'coreboot-stages' not found.
[INFO ]  CBFS: Found 'fallback/romstage' @0x80 size 0xc3c8 in mcache @0xff7c2e2c
[DEBUG]  BS: bootblock times (exec / console): total (unknown) / 0 ms


[NOTE ]  coreboot-4.20-521-g0a810a2881 Fri Jun 30 19:29:06 UTC 2023 x86_32 romstage starting (log level: 7)...
[DEBUG]  Disabling Watchdog reboot... done.
[DEBUG]  SMBus controller enabled
[DEBUG]  Setting up static northbridge registers... done.
[DEBUG]  Started PEG11 link training.
[DEBUG]  Temporarily hiding PEG11.
[DEBUG]  Started PEG10 link training.
[DEBUG]  Temporarily hiding PEG10.
[DEBUG]  Initializing IGD...
[DEBUG]  Back from haswell_early_initialization()
[DEBUG]  CPU id(306c3) ucode:00000028 Intel(R) Core(TM) i7-4600M CPU @ 2.90GHz
[DEBUG]  AES supported, TXT supported, VT supported
[DEBUG]  PCH type: QM87, device id: 8c4f, rev id 5
[DEBUG]  Starting UEFI PEI System Agent
[DEBUG]  FMAP: area RW_MRC_CACHE found @ 800000 (65536 bytes)
[DEBUG]  prepare_mrc_cache: at 0xffc00034, size fd4
[INFO ]  CBFS: Found 'mrc.bin' @0x34fdc0 size 0x2e6e4 in mcache @0xff7c30f4
System Agent: Starting up...
System Agent: Initializing PCH
install_ppi: overwrite GUID {ed097352-9041-445a-80b6-b29d509e8845}
install_ppi: overwrite GUID {908c7f8b-5c48-47fb-8357-f5fd4e235276}
System Agent: Initializing PCH (SMBUS)
System Agent: Initializing PCH (USB)
System Agent: Initializing PCH (SA Init)
System Agent: Initializing PCH (Me UMA)
System Agent: Initializing Memory
System Agent: Done.
Sanity checking heap.
[DEBUG]  MRC Version 1.6.1 Build 2
[DEBUG]  memcfg DDR3 clock 1600 MHz
[DEBUG]  memcfg channel assignment: A: 0, B  1, C  2
[DEBUG]  memcfg channel[0] config (00620020):
[DEBUG]     ECC inactive
[DEBUG]     enhanced interleave mode on
[DEBUG]     rank interleave on
[DEBUG]     DIMMA 8192 MB width x8 or x32 dual rank, selected
[DEBUG]     DIMMB 0 MB width x8 or x32 single rank
[DEBUG]  memcfg channel[1] config (00620020):
[DEBUG]     ECC inactive
[DEBUG]     enhanced interleave mode on
[DEBUG]     rank interleave on
[DEBUG]     DIMMA 8192 MB width x8 or x32 dual rank, selected
[DEBUG]     DIMMB 0 MB width x8 or x32 single rank
[DEBUG]  ME: FW Partition Table      : OK
[DEBUG]  ME: Bringup Loader Failure  : NO
[DEBUG]  ME: Firmware Init Complete  : NO
[DEBUG]  ME: Manufacturing Mode      : YES
[DEBUG]  ME: Boot Options Present    : NO
[DEBUG]  ME: Update In Progress      : NO
[DEBUG]  ME: Current Working State   : Initializing
[DEBUG]  ME: Current Operation State : Bring up
[DEBUG]  ME: Current Operation Mode  : Debug
[DEBUG]  ME: Error Code              : No Error
[DEBUG]  ME: Progress Phase          : BUP Phase
[DEBUG]  ME: Power Management Event  : Pseudo-global reset
[DEBUG]  ME: Progress Phase State    : 0x4d
[DEBUG]  CBMEM:
[DEBUG]  IMD: root @ 0x7f7ff000 254 entries.
[DEBUG]  IMD: root @ 0x7f7fec00 62 entries.
[DEBUG]  External stage cache:
[DEBUG]  IMD: root @ 0x7fbff000 254 entries.
[DEBUG]  IMD: root @ 0x7fbfec00 62 entries.
[DEBUG]  FMAP: area RW_MRC_CACHE found @ 800000 (65536 bytes)
[DEBUG]  MRC: Checking cached data update for 'RW_MRC_CACHE'.
[DEBUG]  flash size 0x2800000 bytes
[INFO ]  SF: Detected 00 0000 with sector size 0x1000, total 0x2800000
[ERROR]  SF size 0x2800000 does not correspond to CONFIG_ROM_SIZE 0xc00000!!
[DEBUG]  MRC: 'RW_MRC_CACHE' does not need update.
[DEBUG]  Unhiding PEG10.
[DEBUG]  Unhiding PEG11.
[DEBUG]  SMM Memory Map
[DEBUG]  SMRAM       : 0x7f800000 0x800000
[DEBUG]   Subregion 0: 0x7f800000 0x300000
[DEBUG]   Subregion 1: 0x7fb00000 0x100000
[DEBUG]   Subregion 2: 0x7fc00000 0x400000
[DEBUG]  Normal boot
[INFO ]  CBFS: Found 'fallback/postcar' @0x3f0c0 size 0x5afc in mcache @0xff7c3084
[DEBUG]  Loading module at 0x7f7cf000 with entry 0x7f7cf031. filesize: 0x5720 memsize: 0xba58
[DEBUG]  Processing 231 relocs. Offset value of 0x7d7cf000
[DEBUG]  BS: romstage times (exec / console): total (unknown) / 1 ms


[NOTE ]  coreboot-4.20-521-g0a810a2881 Fri Jun 30 19:29:06 UTC 2023 x86_32 postcar starting (log level: 7)...
[DEBUG]  Normal boot
[INFO ]  CBFS: Found 'fallback/ramstage' @0x1be00 size 0x1ddd6 in mcache @0x7f7dd10c
[DEBUG]  Loading module at 0x7f781000 with entry 0x7f781000. filesize: 0x3bac0 memsize: 0x4cc30
[DEBUG]  Processing 4086 relocs. Offset value of 0x7b781000
[DEBUG]  BS: postcar times (exec / console): total (unknown) / 0 ms


[NOTE ]  coreboot-4.20-521-g0a810a2881 Fri Jun 30 19:29:06 UTC 2023 x86_32 ramstage starting (log level: 7)...
[DEBUG]  Normal boot
[INFO ]  Enumerating buses...
[DEBUG]  Root Device scanning...
[DEBUG]  CPU_CLUSTER: 0 enabled
[DEBUG]  DOMAIN: 0000 enabled
[DEBUG]  DOMAIN: 0000 scanning...
[DEBUG]  PCI: pci_scan_bus for bus 00
[DEBUG]  PCI: 00:00.0 [8086/0c04] enabled
[INFO ]  PCI: Static device PCI: 00:01.0 not found, disabling it.
[DEBUG]  PCI: 00:01.1 [8086/0c05] enabled
[DEBUG]  PCI: 00:02.0 [8086/0416] enabled
[DEBUG]  PCI: 00:03.0 [8086/0c0c] enabled
[DEBUG]  PCI: 00:04.0 [8086/0c03] enabled
[DEBUG]  PCI: 00:14.0 [8086/8c31] enabled
[DEBUG]  PCI: 00:16.0 [8086/8c3a] enabled
[DEBUG]  PCI: 00:16.1: Disabling device
[DEBUG]  PCI: 00:16.2: Disabling device
[DEBUG]  PCI: 00:16.3: Disabling device
[DEBUG]  PCI: 00:19.0 [8086/1502] enabled
[DEBUG]  PCI: 00:1a.0 [8086/8c2d] enabled
[DEBUG]  PCI: 00:1b.0 [8086/8c20] enabled
[DEBUG]  PCIe Root Port 1 ASPM is disabled
[DEBUG]  PCI: 00:1c.0 [8086/8c10] enabled
[DEBUG]  PCIe Root Port 2 ASPM is disabled
[DEBUG]  PCI: 00:1c.1 [8086/8c12] enabled
[DEBUG]  PCI: 00:1c.2 [8086/8c14] disabled
[DEBUG]  PCI: 00:1c.3 [8086/8c16] disabled
[DEBUG]  Adjusted number of PCIe root ports to 5 as per strpfusecfg2
[DEBUG]  PCI: 00:1c.2: Disabling device
[DEBUG]  PCI: 00:1c.3: Disabling device
[DEBUG]  PCI: 00:1c.4: Disabling device
[DEBUG]  PCI: 00:1c.4 [8086/8c18] disabled
[DEBUG]  PCI: 00:1d.0 [8086/8c26] enabled
[DEBUG]  PCI: 00:1f.0 [8086/8c4f] enabled
[DEBUG]  PCI: 00:1f.2 [8086/8c03] enabled
[DEBUG]  PCI: 00:1f.3 [8086/8c22] enabled
[DEBUG]  PCI: 00:1f.5: Disabling device
[DEBUG]  PCI: 00:1f.6: Disabling device
[WARN ]  PCI: Leftover static devices:
[WARN ]  PCI: 00:01.0
[WARN ]  PCI: 00:16.1
[WARN ]  PCI: 00:16.2
[WARN ]  PCI: 00:16.3
[WARN ]  PCI: 00:1c.5
[WARN ]  PCI: 00:1c.6
[WARN ]  PCI: 00:1c.7
[WARN ]  PCI: 00:1f.5
[WARN ]  PCI: 00:1f.6
[WARN ]  PCI: Check your devicetree.cb.
[DEBUG]  PCI: 00:01.1 scanning...
[DEBUG]  PCI: pci_scan_bus for bus 01
[DEBUG]  scan_bus: bus PCI: 00:01.1 finished in 0 msecs
[DEBUG]  PCI: 00:1c.0 scanning...
[DEBUG]  PCI: pci_scan_bus for bus 02
[DEBUG]  PCI: 02:00.0 [10ec/5227] enabled
[INFO ]  Enabling Common Clock Configuration
[INFO ]  ASPM: Enabled L0s and L1
[INFO ]  PCIe: Max_Payload_Size adjusted to 128
[INFO ]  PCI: 02:00.0: Enabled LTR
[DEBUG]  scan_bus: bus PCI: 00:1c.0 finished in 0 msecs
[DEBUG]  PCI: 00:1c.1 scanning...
[DEBUG]  PCI: pci_scan_bus for bus 03
[DEBUG]  PCI: 03:00.0 [8086/08b2] enabled
[INFO ]  Enabling Common Clock Configuration
[INFO ]  ASPM: Enabled L1
[INFO ]  PCIe: Max_Payload_Size adjusted to 128
[INFO ]  PCI: 03:00.0: Enabled LTR
[DEBUG]  scan_bus: bus PCI: 00:1c.1 finished in 0 msecs
[DEBUG]  PCI: 00:1f.0 scanning...
[DEBUG]  No CMOS option 'touchpad'.
[INFO ]  PMH7: ID 05 Revision 12
[DEBUG]  PNP: 00ff.1 enabled
[INFO ]  H8: EC Firmware ID GLHT30WW-3.23, Version 3.01B
[DEBUG]  No CMOS option 'bluetooth'.
[INFO ]  H8: WWAN detection not implemented. Assuming WWAN installed
[DEBUG]  No CMOS option 'wwan'.
[DEBUG]  PNP: 00ff.2 enabled
[DEBUG]  PNP: 0c31.0 enabled
[DEBUG]  scan_bus: bus PCI: 00:1f.0 finished in 3 msecs
[DEBUG]  PCI: 00:1f.3 scanning...
[DEBUG]  scan_bus: bus PCI: 00:1f.3 finished in 0 msecs
[DEBUG]  scan_bus: bus DOMAIN: 0000 finished in 4 msecs
[DEBUG]  scan_bus: bus Root Device finished in 4 msecs
[INFO ]  done
[DEBUG]  BS: BS_DEV_ENUMERATE run times (exec / console): 4 / 0 ms
[DEBUG]  found VGA at PCI: 00:02.0
[DEBUG]  Setting up VGA for PCI: 00:02.0
[DEBUG]  Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000
[DEBUG]  Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
[INFO ]  Allocating resources...
[INFO ]  Reading resources...
[DEBUG]  mc_add_fixed_mmio_resources: Adding MCHBAR @ 48 0xfed10000-0xfed17fff.
[DEBUG]  mc_add_fixed_mmio_resources: Adding DMIBAR @ 68 0xfed18000-0xfed18fff.
[DEBUG]  mc_add_fixed_mmio_resources: Adding EPBAR @ 40 0xfed19000-0xfed19fff.
[DEBUG]  mc_add_fixed_mmio_resources: Adding GDXCBAR @ 5420 0xfed84000-0xfed84fff.
[DEBUG]  mc_add_fixed_mmio_resources: Adding EDRAMBAR @ 5408 0xfed80000-0xfed83fff.
[DEBUG]  Adding PCIe enhanced config space BAR 0xf0000000-0xf4000000.
[DEBUG]  MC MAP: TOM: 0x400000000
[DEBUG]  MC MAP: TOUUD: 0x47de00000
[DEBUG]  MC MAP: MESEG_BASE: 0x7ffff00000
[DEBUG]  MC MAP: MESEG_LIMIT: 0xfffff
[DEBUG]  MC MAP: REMAP_BASE: 0x400000000
[DEBUG]  MC MAP: REMAP_LIMIT: 0x47ddfffff
[DEBUG]  MC MAP: TOLUD: 0x82200000
[DEBUG]  MC MAP: BGSM: 0x80000000
[DEBUG]  MC MAP: BDSM: 0x80200000
[DEBUG]  MC MAP: TSEGMB: 0x7f800000
[DEBUG]  MC MAP: GGC: 0x209
[DEBUG]  MC MAP: DPR: 0x7f800001
[INFO ]  Available memory above 4GB: 14302M
[ERROR]  PNP: 00ff.1 missing read_resources
[ERROR]  PNP: 00ff.2 missing read_resources
[INFO ]  Done reading resources.
[INFO ]  === Resource allocator: DOMAIN: 0000 - Pass 1 (relative placement) ===
[DEBUG]   PCI: 00:1c.0 io: size: 0 align: 12 gran: 12 limit: ffff
[DEBUG]   PCI: 00:1c.0 io: size: 0 align: 12 gran: 12 limit: ffff done
[DEBUG]   PCI: 00:1c.0 mem: size: 0 align: 20 gran: 20 limit: ffffffff
[DEBUG]    PCI: 02:00.0 10 *  [0x0 - 0xfff] mem
[DEBUG]   PCI: 00:1c.0 mem: size: 100000 align: 20 gran: 20 limit: ffffffff done
[DEBUG]   PCI: 00:1c.0 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff
[DEBUG]   PCI: 00:1c.0 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff done
[DEBUG]   PCI: 00:1c.1 io: size: 0 align: 12 gran: 12 limit: ffff
[DEBUG]   PCI: 00:1c.1 io: size: 0 align: 12 gran: 12 limit: ffff done
[DEBUG]   PCI: 00:1c.1 mem: size: 0 align: 20 gran: 20 limit: ffffffff
[DEBUG]    PCI: 03:00.0 10 *  [0x0 - 0x1fff] mem
[DEBUG]   PCI: 00:1c.1 mem: size: 100000 align: 20 gran: 20 limit: ffffffff done
[DEBUG]   PCI: 00:1c.1 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff
[DEBUG]   PCI: 00:1c.1 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff done
[INFO ]  === Resource allocator: DOMAIN: 0000 - Pass 2 (allocating resources) ===
[DEBUG]  DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff
[DEBUG]   avoid_fixed_resources: PCI: 00:1f.0 00 base 00000000 limit 00000fff io (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:1f.0 84 base 00001600 limit 0000167f io (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:1f.0 88 base 000015e0 limit 000015ef io (fixed)
[DEBUG]   avoid_fixed_resources: PNP: 00ff.1 77 base 000015e0 limit 000015ef io (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:1f.3 20 base 00000400 limit 0000041f io (fixed)
[INFO ]   DOMAIN: 0000: Resource ranges:
[INFO ]   * Base: 1000, Size: 5e0, Tag: 100
[INFO ]   * Base: 15f0, Size: 10, Tag: 100
[INFO ]   * Base: 1680, Size: e980, Tag: 100
[DEBUG]    PCI: 00:02.0 20 *  [0x1000 - 0x103f] limit: 103f io
[DEBUG]    PCI: 00:19.0 18 *  [0x1040 - 0x105f] limit: 105f io
[DEBUG]    PCI: 00:1f.2 20 *  [0x1060 - 0x107f] limit: 107f io
[DEBUG]    PCI: 00:1f.2 10 *  [0x1080 - 0x1087] limit: 1087 io
[DEBUG]    PCI: 00:1f.2 18 *  [0x1088 - 0x108f] limit: 108f io
[DEBUG]    PCI: 00:1f.2 14 *  [0x1090 - 0x1093] limit: 1093 io
[DEBUG]    PCI: 00:1f.2 1c *  [0x1094 - 0x1097] limit: 1097 io
[DEBUG]  DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff done
[DEBUG]  DOMAIN: 0000 mem: base: 7f800000 size: 0 align: 0 gran: 0 limit: fdffffff
[DEBUG]  DOMAIN: 0000 mem: base: 100000000 size: 0 align: 0 gran: 0 limit: 7fffffffff
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 48 base fed10000 limit fed17fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 68 base fed18000 limit fed18fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 40 base fed19000 limit fed19fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 5420 base fed84000 limit fed84fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 5408 base fed80000 limit fed83fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 60 base f0000000 limit f3ffffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 00 base fed90000 limit fed90fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 01 base fed91000 limit fed91fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 02 base 00000000 limit 0009ffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 03 base 000c0000 limit 7f7fffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 04 base 7f800000 limit 7fffffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 05 base 80000000 limit 821fffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 06 base 100000000 limit 47ddfffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 07 base 000a0000 limit 000bffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 08 base 000c0000 limit 000fffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:1f.0 31fe base fec00000 limit ffffffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PNP: 0c31.0 00 base fed40000 limit fed44fff mem (fixed)
[INFO ]   DOMAIN: 0000: Resource ranges:
[INFO ]   * Base: 82200000, Size: 6de00000, Tag: 200
[INFO ]   * Base: f4000000, Size: a000000, Tag: 200
[INFO ]   * Base: 47de00000, Size: 7b82200000, Tag: 200
[DEBUG]    PCI: 00:02.0 18 *  [0x90000000 - 0x9fffffff] limit: 9fffffff prefmem
[DEBUG]    PCI: 00:02.0 10 *  [0x82400000 - 0x827fffff] limit: 827fffff mem
[DEBUG]    PCI: 00:1c.0 20 *  [0x82200000 - 0x822fffff] limit: 822fffff mem
[DEBUG]    PCI: 00:1c.1 20 *  [0x82300000 - 0x823fffff] limit: 823fffff mem
[DEBUG]    PCI: 00:19.0 10 *  [0x82800000 - 0x8281ffff] limit: 8281ffff mem
[DEBUG]    PCI: 00:14.0 10 *  [0x82820000 - 0x8282ffff] limit: 8282ffff mem
[DEBUG]    PCI: 00:04.0 10 *  [0x82830000 - 0x82837fff] limit: 82837fff mem
[DEBUG]    PCI: 00:03.0 10 *  [0x82838000 - 0x8283bfff] limit: 8283bfff mem
[DEBUG]    PCI: 00:1b.0 10 *  [0x8283c000 - 0x8283ffff] limit: 8283ffff mem
[DEBUG]    PCI: 00:19.0 14 *  [0x82840000 - 0x82840fff] limit: 82840fff mem
[DEBUG]    PCI: 00:1f.2 24 *  [0x82841000 - 0x828417ff] limit: 828417ff mem
[DEBUG]    PCI: 00:1a.0 10 *  [0x82842000 - 0x828423ff] limit: 828423ff mem
[DEBUG]    PCI: 00:1d.0 10 *  [0x82843000 - 0x828433ff] limit: 828433ff mem
[DEBUG]    PCI: 00:1f.3 10 *  [0x82844000 - 0x828440ff] limit: 828440ff mem
[DEBUG]    PCI: 00:16.0 10 *  [0x82845000 - 0x8284500f] limit: 8284500f mem
[DEBUG]  DOMAIN: 0000 mem: base: 7f800000 size: 0 align: 0 gran: 0 limit: fdffffff done
[DEBUG]  DOMAIN: 0000 mem: base: 100000000 size: 0 align: 0 gran: 0 limit: 7fffffffff done
[DEBUG]    PCI: 02:00.0 10 *  [0x82200000 - 0x82200fff] limit: 82200fff mem
[DEBUG]    PCI: 03:00.0 10 *  [0x82300000 - 0x82301fff] limit: 82301fff mem
[INFO ]  === Resource allocator: DOMAIN: 0000 - resource allocation complete ===
[DEBUG]  PCI: 00:01.1 1c <- [0x000000000000ffff - 0x000000000000fffe] size 0x00000000 gran 0x0c bus 01 io
[DEBUG]  PCI: 00:01.1 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 bus 01 prefmem
[DEBUG]  PCI: 00:01.1 20 <- [0x00000000ffffffff - 0x00000000fffffffe] size 0x00000000 gran 0x14 bus 01 mem
[DEBUG]  PCI: 00:02.0 10 <- [0x0000000082400000 - 0x00000000827fffff] size 0x00400000 gran 0x16 mem64
[DEBUG]  PCI: 00:02.0 18 <- [0x0000000090000000 - 0x000000009fffffff] size 0x10000000 gran 0x1c prefmem64
[DEBUG]  PCI: 00:02.0 20 <- [0x0000000000001000 - 0x000000000000103f] size 0x00000040 gran 0x06 io
[DEBUG]  PCI: 00:03.0 10 <- [0x0000000082838000 - 0x000000008283bfff] size 0x00004000 gran 0x0e mem64
[DEBUG]  PCI: 00:04.0 10 <- [0x0000000082830000 - 0x0000000082837fff] size 0x00008000 gran 0x0f mem64
[DEBUG]  PCI: 00:14.0 10 <- [0x0000000082820000 - 0x000000008282ffff] size 0x00010000 gran 0x10 mem64
[DEBUG]  PCI: 00:16.0 10 <- [0x0000000082845000 - 0x000000008284500f] size 0x00000010 gran 0x04 mem64
[DEBUG]  PCI: 00:19.0 10 <- [0x0000000082800000 - 0x000000008281ffff] size 0x00020000 gran 0x11 mem
[DEBUG]  PCI: 00:19.0 14 <- [0x0000000082840000 - 0x0000000082840fff] size 0x00001000 gran 0x0c mem
[DEBUG]  PCI: 00:19.0 18 <- [0x0000000000001040 - 0x000000000000105f] size 0x00000020 gran 0x05 io
[DEBUG]  PCI: 00:1a.0 10 <- [0x0000000082842000 - 0x00000000828423ff] size 0x00000400 gran 0x0a mem
[DEBUG]  PCI: 00:1b.0 10 <- [0x000000008283c000 - 0x000000008283ffff] size 0x00004000 gran 0x0e mem64
[DEBUG]  PCI: 00:1c.0 1c <- [0x000000000000ffff - 0x000000000000fffe] size 0x00000000 gran 0x0c bus 02 io
[DEBUG]  PCI: 00:1c.0 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 bus 02 prefmem
[DEBUG]  PCI: 00:1c.0 20 <- [0x0000000082200000 - 0x00000000822fffff] size 0x00100000 gran 0x14 bus 02 mem
[DEBUG]  PCI: 02:00.0 10 <- [0x0000000082200000 - 0x0000000082200fff] size 0x00001000 gran 0x0c mem
[DEBUG]  PCI: 00:1c.1 1c <- [0x000000000000ffff - 0x000000000000fffe] size 0x00000000 gran 0x0c bus 03 io
[DEBUG]  PCI: 00:1c.1 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 bus 03 prefmem
[DEBUG]  PCI: 00:1c.1 20 <- [0x0000000082300000 - 0x00000000823fffff] size 0x00100000 gran 0x14 bus 03 mem
[DEBUG]  PCI: 03:00.0 10 <- [0x0000000082300000 - 0x0000000082301fff] size 0x00002000 gran 0x0d mem64
[DEBUG]  PCI: 00:1d.0 10 <- [0x0000000082843000 - 0x00000000828433ff] size 0x00000400 gran 0x0a mem
[ERROR]  PNP: 00ff.1 missing set_resources
[ERROR]  PNP: 00ff.2 missing set_resources
[DEBUG]  PCI: 00:1f.2 10 <- [0x0000000000001080 - 0x0000000000001087] size 0x00000008 gran 0x03 io
[DEBUG]  PCI: 00:1f.2 14 <- [0x0000000000001090 - 0x0000000000001093] size 0x00000004 gran 0x02 io
[DEBUG]  PCI: 00:1f.2 18 <- [0x0000000000001088 - 0x000000000000108f] size 0x00000008 gran 0x03 io
[DEBUG]  PCI: 00:1f.2 1c <- [0x0000000000001094 - 0x0000000000001097] size 0x00000004 gran 0x02 io
[DEBUG]  PCI: 00:1f.2 20 <- [0x0000000000001060 - 0x000000000000107f] size 0x00000020 gran 0x05 io
[DEBUG]  PCI: 00:1f.2 24 <- [0x0000000082841000 - 0x00000000828417ff] size 0x00000800 gran 0x0b mem
[DEBUG]  PCI: 00:1f.3 10 <- [0x0000000082844000 - 0x00000000828440ff] size 0x00000100 gran 0x08 mem64
[INFO ]  Done setting resources.
[INFO ]  Done allocating resources.
[DEBUG]  BS: BS_DEV_RESOURCES run times (exec / console): 2 / 0 ms
[INFO ]  Enabling resources...
[DEBUG]  PCI: 00:00.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:00.0 cmd <- 06
[DEBUG]  PCI: 00:01.1 bridge ctrl <- 0013
[DEBUG]  PCI: 00:01.1 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:01.1 cmd <- 00
[DEBUG]  PCI: 00:02.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:02.0 cmd <- 03
[DEBUG]  PCI: 00:03.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:03.0 cmd <- 02
[DEBUG]  PCI: 00:04.0 cmd <- 02
[DEBUG]  PCI: 00:14.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:14.0 cmd <- 102
[DEBUG]  PCI: 00:16.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:16.0 cmd <- 02
[DEBUG]  PCI: 00:19.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:19.0 cmd <- 103
[DEBUG]  PCI: 00:1a.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1a.0 cmd <- 102
[DEBUG]  PCI: 00:1b.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1b.0 cmd <- 102
[DEBUG]  PCI: 00:1c.0 bridge ctrl <- 0013
[DEBUG]  PCI: 00:1c.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1c.0 cmd <- 06
[DEBUG]  PCI: 00:1c.1 bridge ctrl <- 0013
[DEBUG]  PCI: 00:1c.1 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1c.1 cmd <- 06
[DEBUG]  PCI: 00:1d.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1d.0 cmd <- 102
[DEBUG]  PCI: 00:1f.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1f.0 cmd <- 107
[DEBUG]  PCI: 00:1f.2 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1f.2 cmd <- 103
[DEBUG]  PCI: 00:1f.3 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1f.3 cmd <- 103
[DEBUG]  PCI: 02:00.0 cmd <- 02
[DEBUG]  PCI: 03:00.0 cmd <- 02
[INFO ]  done.
[INFO ]  Initializing devices...
[DEBUG]  CPU_CLUSTER: 0 init
[DEBUG]  MTRR: Physical address space:
[DEBUG]  0x0000000000000000 - 0x000000000009ffff size 0x000a0000 type 6
[DEBUG]  0x00000000000a0000 - 0x00000000000bffff size 0x00020000 type 0
[DEBUG]  0x00000000000c0000 - 0x000000007fffffff size 0x7ff40000 type 6
[DEBUG]  0x0000000080000000 - 0x000000008fffffff size 0x10000000 type 0
[DEBUG]  0x0000000090000000 - 0x000000009fffffff size 0x10000000 type 1
[DEBUG]  0x00000000a0000000 - 0x00000000ffffffff size 0x60000000 type 0
[DEBUG]  0x0000000100000000 - 0x000000047ddfffff size 0x37de00000 type 6
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x250 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x258 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x259 0x0000000000000000
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x268 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x269 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26a 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26b 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26c 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26d 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26e 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26f 0x0606060606060606
[DEBUG]  apic_id 0x0 setup mtrr for CPU physical address size: 39 bits
[DEBUG]  MTRR: default type WB/UC MTRR counts: 4/5.
[DEBUG]  MTRR: WB selected as default type.
[DEBUG]  MTRR: 0 base 0x0000000080000000 mask 0x0000007ff0000000 type 0
[DEBUG]  MTRR: 1 base 0x0000000090000000 mask 0x0000007ff0000000 type 1
[DEBUG]  MTRR: 2 base 0x00000000a0000000 mask 0x0000007fe0000000 type 0
[DEBUG]  MTRR: 3 base 0x00000000c0000000 mask 0x0000007fc0000000 type 0

[DEBUG]  MTRR check
[DEBUG]  Fixed MTRRs   : Enabled
[DEBUG]  Variable MTRRs: Enabled

[DEBUG]  Initializing VR config.
[DEBUG]  CPU has 2 cores, 4 threads enabled.
[DEBUG]  Setting up SMI for CPU
[INFO ]  Will perform SMM setup.
[INFO ]  CBFS: Found 'cpu_microcode_blob.bin' @0xc500 size 0xf800 in mcache @0x7f7dd0ac
[DEBUG]  microcode: sig=0x306c3 pf=0x10 revision=0x28
[INFO ]  CPU: Intel(R) Core(TM) i7-4600M CPU @ 2.90GHz.
[INFO ]  LAPIC 0x0 in XAPIC mode.
[DEBUG]  CPU: APIC: 00 enabled
[DEBUG]  CPU: APIC: 01 enabled
[DEBUG]  CPU: APIC: 02 enabled
[DEBUG]  CPU: APIC: 03 enabled
[DEBUG]  Loading module at 0x00030000 with entry 0x00030000. filesize: 0x178 memsize: 0x178
[DEBUG]  Processing 16 relocs. Offset value of 0x00030000
[DEBUG]  Attempting to start 3 APs
[DEBUG]  Waiting for 10ms after sending INIT.
[DEBUG]  Waiting for SIPI to complete...
[DEBUG]  done.
[DEBUG]  Waiting for SIPI to complete...
[INFO ]  LAPIC 0x1 in XAPIC mode.
[DEBUG]  done.
[INFO ]  AP: slot 1 apic_id 1, MCU rev: 0x00000028
[INFO ]  LAPIC 0x2 in XAPIC mode.
[INFO ]  LAPIC 0x3 in XAPIC mode.
[INFO ]  AP: slot 2 apic_id 2, MCU rev: 0x00000028
[INFO ]  AP: slot 3 apic_id 3, MCU rev: 0x00000028
[DEBUG]  Loading module at 0x00038000 with entry 0x00038000. filesize: 0x1a0 memsize: 0x1a0
[DEBUG]  Processing 9 relocs. Offset value of 0x00038000
[DEBUG]  smm_module_setup_stub: stack_top = 0x7f801000
[DEBUG]  smm_module_setup_stub: per cpu stack_size = 0x400
[DEBUG]  smm_module_setup_stub: runtime.smm_size = 0x10000
[DEBUG]  SMM Module: stub loaded at 38000. Will call 0x7f7a0c2a
[DEBUG]  Installing permanent SMM handler to 0x7f800000
[DEBUG]  HANDLER      [0x7fafb000-0x7faff750]

[DEBUG]  CPU 0
[DEBUG]    ss0        [0x7fafac00-0x7fafb000]
[DEBUG]    stub0      [0x7faf3000-0x7faf31a0]

[DEBUG]  CPU 1
[DEBUG]    ss1        [0x7fafa800-0x7fafac00]
[DEBUG]    stub1      [0x7faf2c00-0x7faf2da0]

[DEBUG]  CPU 2
[DEBUG]    ss2        [0x7fafa400-0x7fafa800]
[DEBUG]    stub2      [0x7faf2800-0x7faf29a0]

[DEBUG]  CPU 3
[DEBUG]    ss3        [0x7fafa000-0x7fafa400]
[DEBUG]    stub3      [0x7faf2400-0x7faf25a0]

[DEBUG]  stacks       [0x7f800000-0x7f801000]
[DEBUG]  Loading module at 0x7fafb000 with entry 0x7fafbeff. filesize: 0x4628 memsize: 0x4750
[DEBUG]  Processing 270 relocs. Offset value of 0x7fafb000
[DEBUG]  Loading module at 0x7faf3000 with entry 0x7faf3000. filesize: 0x1a0 memsize: 0x1a0
[DEBUG]  Processing 9 relocs. Offset value of 0x7faf3000
[DEBUG]  smm_module_setup_stub: stack_top = 0x7f801000
[DEBUG]  smm_module_setup_stub: per cpu stack_size = 0x400
[DEBUG]  smm_module_setup_stub: runtime.smm_size = 0x300000
[DEBUG]  SMM Module: placing smm entry code at 7faf2c00,  cpu # 0x1
[DEBUG]  SMM Module: placing smm entry code at 7faf2800,  cpu # 0x2
[DEBUG]  SMM Module: placing smm entry code at 7faf2400,  cpu # 0x3
[DEBUG]  SMM Module: stub loaded at 7faf3000. Will call 0x7fafbeff
[DEBUG]  SMI_STS: MCSMI 
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x7faeb000, cpu = 0
[DEBUG]  In relocation handler: CPU 0
[DEBUG]  New SMBASE=0x7faeb000 IEDBASE=0x7fc00000
[DEBUG]  Writing SMRR. base = 0x7f800006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x7faeac00, cpu = 1
[DEBUG]  In relocation handler: CPU 1
[DEBUG]  New SMBASE=0x7faeac00 IEDBASE=0x7fc00000
[DEBUG]  Writing SMRR. base = 0x7f800006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x7faea800, cpu = 2
[DEBUG]  In relocation handler: CPU 2
[DEBUG]  New SMBASE=0x7faea800 IEDBASE=0x7fc00000
[DEBUG]  Writing SMRR. base = 0x7f800006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x7faea400, cpu = 3
[DEBUG]  In relocation handler: CPU 3
[DEBUG]  New SMBASE=0x7faea400 IEDBASE=0x7fc00000
[DEBUG]  Writing SMRR. base = 0x7f800006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  Initializing CPU #0
[DEBUG]  CPU: vendor Intel device 306c3
[DEBUG]  CPU: family 06, model 3c, stepping 03
[DEBUG]  IA32_FEATURE_CONTROL already locked; VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL already locked
[DEBUG]  cpu: energy policy set to 6
[INFO ]  Turbo is available but hidden
[INFO ]  Turbo is available and visible
[INFO ]  CPU #0 initialized
[INFO ]  Initializing CPU #1
[INFO ]  Initializing CPU #3
[INFO ]  Initializing CPU #2
[DEBUG]  CPU: vendor Intel device 306c3
[DEBUG]  CPU: family 06, model 3c, stepping 03
[DEBUG]  CPU: vendor Intel device 306c3
[DEBUG]  CPU: family 06, model 3c, stepping 03
[DEBUG]  CPU: vendor Intel device 306c3
[DEBUG]  CPU: family 06, model 3c, stepping 03
[DEBUG]  IA32_FEATURE_CONTROL already locked; VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL already locked
[DEBUG]  IA32_FEATURE_CONTROL already locked; VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL already locked; VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL already locked
[DEBUG]  IA32_FEATURE_CONTROL already locked
[DEBUG]  cpu: energy policy set to 6
[INFO ]  CPU #3 initialized
[DEBUG]  cpu: energy policy set to 6
[INFO ]  CPU #1 initialized
[DEBUG]  cpu: energy policy set to 6
[INFO ]  CPU #2 initialized
[INFO ]  bsp_do_flight_plan done after 2 msecs.
[DEBUG]  CPU: frequency set to 3600
[DEBUG]  Enabling SMIs.
[DEBUG]  Locking SMM.
[DEBUG]  CPU_CLUSTER: 0 init finished in 12 msecs
[DEBUG]  PCI: 00:00.0 init
[DEBUG]  Disabling PEG12.
[DEBUG]  Disabling PEG10.
[DEBUG]  Disabling "device 7".
[DEBUG]  Set BIOS_RESET_CPL
[DEBUG]  CPU TDP: 37 Watts
[DEBUG]  PCI: 00:00.0 init finished in 1 msecs
[DEBUG]  PCI: 00:01.1 init
[DEBUG]  PCI: 00:01.1 init finished in 0 msecs
[DEBUG]  PCI: 00:02.0 init
[INFO ]  CBFS: Found 'vbt.bin' @0x3e480 size 0x582 in mcache @0x7f7dd204
[INFO ]  Found a VBT of 4608 bytes after decompression
[INFO ]  GMA: Found VBT in CBFS
[INFO ]  GMA: Found valid VBT in CBFS
[DEBUG]  GT Power Management Init
[INFO ]  GMA: Setting backlight PWM frequency to 135MHz / 128 / 4794 = 220Hz
[INFO ]  framebuffer_info: bytes_per_line: 4096, bits_per_pixel: 32
[INFO ]                     x_res x y_res: 1024 x 768, size: 3145728 at 0x90000000
[DEBUG]  GT Power Management Init (post VBIOS)
[DEBUG]  PCI: 00:02.0 init finished in 224 msecs
[DEBUG]  PCI: 00:03.0 init
[DEBUG]  Mini-HD: base = 0x82838000
[DEBUG]  azalia_audio: Initializing codec #0
[DEBUG]  azalia_audio: codec viddid: 80862807
[DEBUG]  azalia_audio: verb_size: 16
[DEBUG]  azalia_audio: verb loaded.
[DEBUG]  PCI: 00:03.0 init finished in 3 msecs
[DEBUG]  PCI: 00:04.0 init
[DEBUG]  PCI: 00:04.0 init finished in 0 msecs
[DEBUG]  PCI: 00:14.0 init
[DEBUG]  PCI: 00:14.0 init finished in 0 msecs
[DEBUG]  PCI: 00:16.0 init
[DEBUG]  ME: FW Partition Table      : OK
[DEBUG]  ME: Bringup Loader Failure  : NO
[DEBUG]  ME: Firmware Init Complete  : NO
[DEBUG]  ME: Manufacturing Mode      : YES
[DEBUG]  ME: Boot Options Present    : NO
[DEBUG]  ME: Update In Progress      : NO
[DEBUG]  ME: Current Working State   : Initializing
[DEBUG]  ME: Current Operation State : Bring up
[DEBUG]  ME: Current Operation Mode  : Debug
[DEBUG]  ME: Error Code              : No Error
[DEBUG]  ME: Progress Phase          : BUP Phase
[DEBUG]  ME: Power Management Event  : Pseudo-global reset
[DEBUG]  ME: Progress Phase State    : 0x4d
[CRIT ]  intel_me_path: mbp is not ready!
[NOTE ]  ME: BIOS path: Error
[ERROR]  ME: MBP not ready
[DEBUG]  PCI: 00:16.0 init finished in 0 msecs
[DEBUG]  PCI: 00:19.0 init
[DEBUG]  PCI: 00:19.0 init finished in 0 msecs
[DEBUG]  PCI: 00:1a.0 init
[DEBUG]  EHCI: Setting up controller.. done.
[DEBUG]  PCI: 00:1a.0 init finished in 0 msecs
[DEBUG]  PCI: 00:1b.0 init
[DEBUG]  Azalia: base = 0x8283c000
[DEBUG]  Azalia: codec_mask = 01
[DEBUG]  azalia_audio: Initializing codec #0
[DEBUG]  azalia_audio: codec viddid: 10ec0292
[DEBUG]  azalia_audio: verb_size: 128
[DEBUG]  azalia_audio: verb loaded.
[DEBUG]  PCI: 00:1b.0 init finished in 7 msecs
[DEBUG]  PCI: 00:1c.0 init
[DEBUG]  Initializing PCH PCIe bridge.
[DEBUG]  PCI: 00:1c.0 init finished in 0 msecs
[DEBUG]  PCI: 00:1c.1 init
[DEBUG]  Initializing PCH PCIe bridge.
[DEBUG]  PCI: 00:1c.1 init finished in 0 msecs
[DEBUG]  PCI: 00:1d.0 init
[DEBUG]  EHCI: Setting up controller.. done.
[DEBUG]  PCI: 00:1d.0 init finished in 0 msecs
[DEBUG]  PCI: 00:1f.0 init
[DEBUG]  pch: lpc_init
[DEBUG]  IOAPIC: Initializing IOAPIC at 0xfec00000
[DEBUG]  IOAPIC: ID = 0x00
[DEBUG]  IOAPIC: 24 interrupts
[DEBUG]  IOAPIC: Clearing IOAPIC at 0xfec00000
[DEBUG]  IOAPIC: Bootstrap Processor Local APIC = 0x00
[INFO ]  Set power off after power failure.
[INFO ]  NMI sources enabled.
[DEBUG]  LynxPoint H PM init
[DEBUG]  RTC: failed = 0x0
[DEBUG]  RTC Init
[DEBUG]  apm_control: Disabling ACPI.
[DEBUG]  APMC done.
[DEBUG]  PCI: 00:1f.0 init finished in 0 msecs
[DEBUG]  PCI: 00:1f.2 init
[DEBUG]  SATA: Initializing...
[DEBUG]  SATA: Controller in AHCI mode.
[DEBUG]  ABAR: 0x82841000
[DEBUG]  PCI: 00:1f.2 init finished in 0 msecs
[DEBUG]  PCI: 00:1f.3 init
[DEBUG]  PCI: 00:1f.3 init finished in 0 msecs
[DEBUG]  PCI: 02:00.0 init
[DEBUG]  PCI: 02:00.0 init finished in 0 msecs
[DEBUG]  PCI: 03:00.0 init
[DEBUG]  PCI: 03:00.0 init finished in 0 msecs
[DEBUG]  PNP: 00ff.2 init
[DEBUG]  PNP: 00ff.2 init finished in 0 msecs
[INFO ]  Devices initialized
[DEBUG]  BS: BS_DEV_INIT run times (exec / console): 250 / 0 ms
[DEBUG]  FMAP: area SMMSTORE found @ 810000 (262144 bytes)
[DEBUG]  flash size 0x2800000 bytes
[INFO ]  SF: Detected 00 0000 with sector size 0x1000, total 0x2800000
[ERROR]  SF size 0x2800000 does not correspond to CONFIG_ROM_SIZE 0xc00000!!
[DEBUG]  smm store: 4 # blocks with size 0x10000
[INFO ]  SMMSTORE: Setting up SMI handler
[INFO ]  Found TPM ST33ZP24 by ST Microelectronics
[DEBUG]  TPM: Startup
[DEBUG]  TPM: command 0x99 returned 0x0
[DEBUG]  TPM: Asserting physical presence
[DEBUG]  TPM: command 0x4000000a returned 0x0
[DEBUG]  TPM: command 0x65 returned 0x0
[DEBUG]  TPM: flags disable=0, deactivated=0, nvlocked=1
[INFO ]  TPM: setup succeeded
[DEBUG]  BS: BS_DEV_INIT exit times (exec / console): 56 / 0 ms
[INFO ]  Finalize devices...
[DEBUG]  PCI: 00:00.0 final
[DEBUG]  PCI: 00:16.0 final
[INFO ]  ME: MBP cleared
[DEBUG]  PCI: 00:1b.0 final
[DEBUG]  PCI: 00:1f.0 final
[DEBUG]  apm_control: Finalizing SMM.
[DEBUG]  APMC done.
[INFO ]  Devices finalized
[INFO ]  CBFS: Found 'fallback/dsdt.aml' @0x3adc0 size 0x367a in mcache @0x7f7dd1d8
[WARN ]  CBFS: 'fallback/slic' not found.
[INFO ]  ACPI: Writing ACPI tables at 7f730000.
[DEBUG]  ACPI:    * FACS
[DEBUG]  ACPI:    * DSDT
[DEBUG]  ACPI:    * FADT
[DEBUG]  ACPI: added table 1/32, length now 40
[DEBUG]  ACPI:     * SSDT
[DEBUG]  Found 1 CPU(s) with 4 core(s) each.
[DEBUG]  PSS: 2901MHz power 37000 control 0x2400 status 0x2400
[DEBUG]  PSS: 2900MHz power 37000 control 0x1d00 status 0x1d00
[DEBUG]  PSS: 2400MHz power 28854 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 22943 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 17471 control 0x1000 status 0x1000
[DEBUG]  PSS: 1200MHz power 12469 control 0xc00 status 0xc00
[DEBUG]  PSS: 800MHz power 7885 control 0x800 status 0x800
[DEBUG]  PSS: 2901MHz power 37000 control 0x2400 status 0x2400
[DEBUG]  PSS: 2900MHz power 37000 control 0x1d00 status 0x1d00
[DEBUG]  PSS: 2400MHz power 28854 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 22943 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 17471 control 0x1000 status 0x1000
[DEBUG]  PSS: 1200MHz power 12469 control 0xc00 status 0xc00
[DEBUG]  PSS: 800MHz power 7885 control 0x800 status 0x800
[DEBUG]  PSS: 2901MHz power 37000 control 0x2400 status 0x2400
[DEBUG]  PSS: 2900MHz power 37000 control 0x1d00 status 0x1d00
[DEBUG]  PSS: 2400MHz power 28854 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 22943 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 17471 control 0x1000 status 0x1000
[DEBUG]  PSS: 1200MHz power 12469 control 0xc00 status 0xc00
[DEBUG]  PSS: 800MHz power 7885 control 0x800 status 0x800
[DEBUG]  PSS: 2901MHz power 37000 control 0x2400 status 0x2400
[DEBUG]  PSS: 2900MHz power 37000 control 0x1d00 status 0x1d00
[DEBUG]  PSS: 2400MHz power 28854 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 22943 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 17471 control 0x1000 status 0x1000
[DEBUG]  PSS: 1200MHz power 12469 control 0xc00 status 0xc00
[DEBUG]  PSS: 800MHz power 7885 control 0x800 status 0x800
[DEBUG]  Generating ACPI PIRQ entries
[INFO ]  ACPI:    * H8
[INFO ]  H8: BDC detection not implemented. Assuming BDC installed
[INFO ]  H8: WWAN detection not implemented. Assuming WWAN installed
[INFO ]  \_SB_.PCI0.TPM: LPC TPM PNP: 0c31.0
[DEBUG]  ACPI: added table 2/32, length now 44
[DEBUG]  ACPI:    * MCFG
[DEBUG]  ACPI: added table 3/32, length now 48
[DEBUG]  ACPI:    * TCPA
[DEBUG]  TCPA log created at 0x7f720000
[DEBUG]  ACPI: added table 4/32, length now 52
[DEBUG]  ACPI:    * MADT
[DEBUG]  IOAPIC: 24 interrupts
[DEBUG]  ACPI: added table 5/32, length now 56
[DEBUG]  ACPI:    * SPCR
[DEBUG]  current = 7f7352c0
[DEBUG]  ACPI:    * DMAR
[DEBUG]  ACPI: added table 6/32, length now 60
[DEBUG]  ACPI:    * HPET
[DEBUG]  ACPI: added table 7/32, length now 64
[DEBUG]  current = 7f7353c0
[INFO ]  ACPI: done.
[DEBUG]  ACPI tables: 21440 bytes.
[DEBUG]  smbios_write_tables: 7f718000
[DEBUG]  SMBIOS firmware version is set to coreboot_version: '4.20-521-g0a810a2881'
[INFO ]  Create SMBIOS type 16
[INFO ]  Create SMBIOS type 17
[INFO ]  Create SMBIOS type 20
[INFO ]  PCI: 03:00.0 (unknown)
[DEBUG]  SMBIOS tables: 1119 bytes.
[DEBUG]  Writing table forward entry at 0x00000500
[DEBUG]  Wrote coreboot table at: 0x00000500, 0x10 bytes, checksum 4069
[DEBUG]  Writing coreboot table at 0x7f754000
[INFO ]  CBFS: Found 'cmos_layout.bin' @0x3eb80 size 0x510 in mcache @0x7f7dd25c
[DEBUG]   0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
[DEBUG]   1. 0000000000001000-000000000009ffff: RAM
[DEBUG]   2. 00000000000a0000-00000000000fffff: RESERVED
[DEBUG]   3. 0000000000100000-000000007f717fff: RAM
[DEBUG]   4. 000000007f718000-000000007f780fff: CONFIGURATION TABLES
[DEBUG]   5. 000000007f781000-000000007f7cdfff: RAMSTAGE
[DEBUG]   6. 000000007f7ce000-000000007f7fffff: CONFIGURATION TABLES
[DEBUG]   7. 000000007f800000-00000000821fffff: RESERVED
[DEBUG]   8. 00000000f0000000-00000000f3ffffff: RESERVED
[DEBUG]   9. 00000000fed10000-00000000fed19fff: RESERVED
[DEBUG]  10. 00000000fed40000-00000000fed44fff: RESERVED
[DEBUG]  11. 00000000fed80000-00000000fed84fff: RESERVED
[DEBUG]  12. 00000000fed90000-00000000fed91fff: RESERVED
[DEBUG]  13. 0000000100000000-000000047ddfffff: RAM
[DEBUG]  Wrote coreboot table at: 0x7f754000, 0x95c bytes, checksum 875a
[DEBUG]  coreboot table: 2420 bytes.
[DEBUG]  IMD ROOT    0. 0x7f7ff000 0x00001000
[DEBUG]  IMD SMALL   1. 0x7f7fe000 0x00001000
[DEBUG]  CONSOLE     2. 0x7f7de000 0x00020000
[DEBUG]  RO MCACHE   3. 0x7f7dd000 0x00000378
[DEBUG]  TIME STAMP  4. 0x7f7dc000 0x00000910
[DEBUG]  MEM INFO    5. 0x7f7db000 0x000007a8
[DEBUG]  AFTER CAR   6. 0x7f7ce000 0x0000d000
[DEBUG]  RAMSTAGE    7. 0x7f780000 0x0004e000
[DEBUG]  SMM BACKUP  8. 0x7f770000 0x00010000
[DEBUG]  IGD OPREGION 9. 0x7f76c000 0x00003130
[DEBUG]  SMM COMBUFFER10. 0x7f75c000 0x00010000
[DEBUG]  COREBOOT   11. 0x7f754000 0x00008000
[DEBUG]  ACPI       12. 0x7f730000 0x00024000
[DEBUG]  TCPA TCGLOG13. 0x7f720000 0x00010000
[DEBUG]  SMBIOS     14. 0x7f718000 0x00008000
[DEBUG]  IMD small region:
[DEBUG]    IMD ROOT    0. 0x7f7fec00 0x00000400
[DEBUG]    FMAP        1. 0x7f7feae0 0x0000010a
[DEBUG]    ROMSTAGE    2. 0x7f7feac0 0x00000004
[DEBUG]    ROMSTG STCK 3. 0x7f7fea00 0x000000a8
[DEBUG]    ACPI GNVS   4. 0x7f7fe940 0x000000b0
[DEBUG]  BS: BS_WRITE_TABLES run times (exec / console): 4 / 0 ms
[INFO ]  CBFS: Found 'fallback/payload' @0x44c00 size 0x10e594 in mcache @0x7f7dd2c8
[DEBUG]  Checking segment from ROM address 0xffc94e2c
[DEBUG]  Checking segment from ROM address 0xffc94e48
[DEBUG]  Loading segment from ROM address 0xffc94e2c
[DEBUG]    code (compression=1)
[DEBUG]    New segment dstaddr 0x00800000 memsize 0x1000000 srcaddr 0xffc94e64 filesize 0x10e55c
[DEBUG]  Loading Segment: addr: 0x00800000 memsz: 0x0000000001000000 filesz: 0x000000000010e55c
[DEBUG]  using LZMA
[DEBUG]  Loading segment from ROM address 0xffc94e48
[DEBUG]    Entry Point 0x0080168c
[DEBUG]  BS: BS_PAYLOAD_LOAD run times (exec / console): 349 / 0 ms
[DEBUG]  ICH-NM10-PCH: watchdog disabled
[DEBUG]  Jumping to boot code at 0x0080168c(0x7f754000)


[NOTE ]  coreboot-4.20-521-g0a810a2881 Fri Jun 30 19:29:06 UTC 2023 x86_32 bootblock starting (log level: 7)...
[DEBUG]  FMAP: Found "FLASH" version 1.1 at 0x850000.
[DEBUG]  FMAP: base = 0xff400000 size = 0xc00000 #areas = 5
[DEBUG]  FMAP: area COREBOOT found @ 850200 (3866112 bytes)
[INFO ]  CBFS: mcache @0xff7c2e00 built for 16 files, used 0x378 of 0x4000 bytes
[WARN ]  CBFS: 'coreboot-stages' not found.
[INFO ]  CBFS: Found 'fallback/romstage' @0x80 size 0xc3c8 in mcache @0xff7c2e2c
[DEBUG]  BS: bootblock times (exec / console): total (unknown) / 0 ms


[NOTE ]  coreboot-4.20-521-g0a810a2881 Fri Jun 30 19:29:06 UTC 2023 x86_32 romstage starting (log level: 7)...
[DEBUG]  Disabling Watchdog reboot... done.
[DEBUG]  SMBus controller enabled
[DEBUG]  Setting up static northbridge registers... done.
[DEBUG]  Started PEG11 link training.
[DEBUG]  Temporarily hiding PEG11.
[DEBUG]  Started PEG10 link training.
[DEBUG]  Temporarily hiding PEG10.
[DEBUG]  Initializing IGD...
[DEBUG]  Back from haswell_early_initialization()
[DEBUG]  CPU id(306c3) ucode:00000028 Intel(R) Core(TM) i7-4600M CPU @ 2.90GHz
[DEBUG]  AES supported, TXT supported, VT supported
[DEBUG]  PCH type: QM87, device id: 8c4f, rev id 5
[DEBUG]  Starting UEFI PEI System Agent
[DEBUG]  FMAP: area RW_MRC_CACHE found @ 800000 (65536 bytes)
[DEBUG]  prepare_mrc_cache: at 0xffc00034, size fd4
[INFO ]  CBFS: Found 'mrc.bin' @0x34fdc0 size 0x2e6e4 in mcache @0xff7c30f4
System Agent: Starting up...
System Agent: Initializing PCH
install_ppi: overwrite GUID {ed097352-9041-445a-80b6-b29d509e8845}
install_ppi: overwrite GUID {908c7f8b-5c48-47fb-8357-f5fd4e235276}
System Agent: Initializing PCH (SMBUS)
System Agent: Initializing PCH (USB)
System Agent: Initializing PCH (SA Init)
System Agent: Initializing PCH (Me UMA)
System Agent: Initializing Memory
System Agent: Done.
Sanity checking heap.
[DEBUG]  MRC Version 1.6.1 Build 2
[DEBUG]  memcfg DDR3 clock 1600 MHz
[DEBUG]  memcfg channel assignment: A: 0, B  1, C  2
[DEBUG]  memcfg channel[0] config (00620020):
[DEBUG]     ECC inactive
[DEBUG]     enhanced interleave mode on
[DEBUG]     rank interleave on
[DEBUG]     DIMMA 8192 MB width x8 or x32 dual rank, selected
[DEBUG]     DIMMB 0 MB width x8 or x32 single rank
[DEBUG]  memcfg channel[1] config (00620020):
[DEBUG]     ECC inactive
[DEBUG]     enhanced interleave mode on
[DEBUG]     rank interleave on
[DEBUG]     DIMMA 8192 MB width x8 or x32 dual rank, selected
[DEBUG]     DIMMB 0 MB width x8 or x32 single rank
[DEBUG]  ME: FW Partition Table      : OK
[DEBUG]  ME: Bringup Loader Failure  : NO
[DEBUG]  ME: Firmware Init Complete  : NO
[DEBUG]  ME: Manufacturing Mode      : YES
[DEBUG]  ME: Boot Options Present    : NO
[DEBUG]  ME: Update In Progress      : NO
[DEBUG]  ME: Current Working State   : Initializing
[DEBUG]  ME: Current Operation State : Bring up
[DEBUG]  ME: Current Operation Mode  : Debug
[DEBUG]  ME: Error Code              : No Error
[DEBUG]  ME: Progress Phase          : BUP Phase
[DEBUG]  ME: Power Management Event  : Pseudo-global reset
[DEBUG]  ME: Progress Phase State    : 0x4d
[DEBUG]  CBMEM:
[DEBUG]  IMD: root @ 0x7f7ff000 254 entries.
[DEBUG]  IMD: root @ 0x7f7fec00 62 entries.
[DEBUG]  External stage cache:
[DEBUG]  IMD: root @ 0x7fbff000 254 entries.
[DEBUG]  IMD: root @ 0x7fbfec00 62 entries.
[DEBUG]  FMAP: area RW_MRC_CACHE found @ 800000 (65536 bytes)
[DEBUG]  MRC: Checking cached data update for 'RW_MRC_CACHE'.
[DEBUG]  flash size 0x2800000 bytes
[INFO ]  SF: Detected 00 0000 with sector size 0x1000, total 0x2800000
[ERROR]  SF size 0x2800000 does not correspond to CONFIG_ROM_SIZE 0xc00000!!
[DEBUG]  MRC: 'RW_MRC_CACHE' does not need update.
[DEBUG]  Unhiding PEG10.
[DEBUG]  Unhiding PEG11.
[DEBUG]  SMM Memory Map
[DEBUG]  SMRAM       : 0x7f800000 0x800000
[DEBUG]   Subregion 0: 0x7f800000 0x300000
[DEBUG]   Subregion 1: 0x7fb00000 0x100000
[DEBUG]   Subregion 2: 0x7fc00000 0x400000
[DEBUG]  Normal boot
[INFO ]  CBFS: Found 'fallback/postcar' @0x3f0c0 size 0x5afc in mcache @0xff7c3084
[DEBUG]  Loading module at 0x7f7cf000 with entry 0x7f7cf031. filesize: 0x5720 memsize: 0xba58
[DEBUG]  Processing 231 relocs. Offset value of 0x7d7cf000
[DEBUG]  BS: romstage times (exec / console): total (unknown) / 1 ms


[NOTE ]  coreboot-4.20-521-g0a810a2881 Fri Jun 30 19:29:06 UTC 2023 x86_32 postcar starting (log level: 7)...
[DEBUG]  Normal boot
[INFO ]  CBFS: Found 'fallback/ramstage' @0x1be00 size 0x1ddd6 in mcache @0x7f7dd10c
[DEBUG]  Loading module at 0x7f781000 with entry 0x7f781000. filesize: 0x3bac0 memsize: 0x4cc30
[DEBUG]  Processing 4086 relocs. Offset value of 0x7b781000
[DEBUG]  BS: postcar times (exec / console): total (unknown) / 0 ms


[NOTE ]  coreboot-4.20-521-g0a810a2881 Fri Jun 30 19:29:06 UTC 2023 x86_32 ramstage starting (log level: 7)...
[DEBUG]  Normal boot
[INFO ]  Enumerating buses...
[DEBUG]  Root Device scanning...
[DEBUG]  CPU_CLUSTER: 0 enabled
[DEBUG]  DOMAIN: 0000 enabled
[DEBUG]  DOMAIN: 0000 scanning...
[DEBUG]  PCI: pci_scan_bus for bus 00
[DEBUG]  PCI: 00:00.0 [8086/0c04] enabled
[INFO ]  PCI: Static device PCI: 00:01.0 not found, disabling it.
[DEBUG]  PCI: 00:01.1 [8086/0c05] enabled
[DEBUG]  PCI: 00:02.0 [8086/0416] enabled
[DEBUG]  PCI: 00:03.0 [8086/0c0c] enabled
[DEBUG]  PCI: 00:04.0 [8086/0c03] enabled
[DEBUG]  PCI: 00:14.0 [8086/8c31] enabled
[DEBUG]  PCI: 00:16.0 [8086/8c3a] enabled
[DEBUG]  PCI: 00:16.1: Disabling device
[DEBUG]  PCI: 00:16.2: Disabling device
[DEBUG]  PCI: 00:16.3: Disabling device
[DEBUG]  PCI: 00:19.0 [8086/1502] enabled
[DEBUG]  PCI: 00:1a.0 [8086/8c2d] enabled
[DEBUG]  PCI: 00:1b.0 [8086/8c20] enabled
[DEBUG]  PCIe Root Port 1 ASPM is disabled
[DEBUG]  PCI: 00:1c.0 [8086/8c10] enabled
[DEBUG]  PCIe Root Port 2 ASPM is disabled
[DEBUG]  PCI: 00:1c.1 [8086/8c12] enabled
[DEBUG]  PCI: 00:1c.2 [8086/8c14] disabled
[DEBUG]  PCI: 00:1c.3 [8086/8c16] disabled
[DEBUG]  Adjusted number of PCIe root ports to 5 as per strpfusecfg2
[DEBUG]  PCI: 00:1c.2: Disabling device
[DEBUG]  PCI: 00:1c.3: Disabling device
[DEBUG]  PCI: 00:1c.4: Disabling device
[DEBUG]  PCI: 00:1c.4 [8086/8c18] disabled
[DEBUG]  PCI: 00:1d.0 [8086/8c26] enabled
[DEBUG]  PCI: 00:1f.0 [8086/8c4f] enabled
[DEBUG]  PCI: 00:1f.2 [8086/8c03] enabled
[DEBUG]  PCI: 00:1f.3 [8086/8c22] enabled
[DEBUG]  PCI: 00:1f.5: Disabling device
[DEBUG]  PCI: 00:1f.6: Disabling device
[WARN ]  PCI: Leftover static devices:
[WARN ]  PCI: 00:01.0
[WARN ]  PCI: 00:16.1
[WARN ]  PCI: 00:16.2
[WARN ]  PCI: 00:16.3
[WARN ]  PCI: 00:1c.5
[WARN ]  PCI: 00:1c.6
[WARN ]  PCI: 00:1c.7
[WARN ]  PCI: 00:1f.5
[WARN ]  PCI: 00:1f.6
[WARN ]  PCI: Check your devicetree.cb.
[DEBUG]  PCI: 00:01.1 scanning...
[DEBUG]  PCI: pci_scan_bus for bus 01
[DEBUG]  scan_bus: bus PCI: 00:01.1 finished in 0 msecs
[DEBUG]  PCI: 00:1c.0 scanning...
[DEBUG]  PCI: pci_scan_bus for bus 02
[DEBUG]  PCI: 02:00.0 [10ec/5227] enabled
[INFO ]  Enabling Common Clock Configuration
[INFO ]  ASPM: Enabled L0s and L1
[INFO ]  PCIe: Max_Payload_Size adjusted to 128
[INFO ]  PCI: 02:00.0: Enabled LTR
[DEBUG]  scan_bus: bus PCI: 00:1c.0 finished in 0 msecs
[DEBUG]  PCI: 00:1c.1 scanning...
[DEBUG]  PCI: pci_scan_bus for bus 03
[DEBUG]  PCI: 03:00.0 [8086/08b2] enabled
[INFO ]  Enabling Common Clock Configuration
[INFO ]  ASPM: Enabled L1
[INFO ]  PCIe: Max_Payload_Size adjusted to 128
[INFO ]  PCI: 03:00.0: Enabled LTR
[DEBUG]  scan_bus: bus PCI: 00:1c.1 finished in 0 msecs
[DEBUG]  PCI: 00:1f.0 scanning...
[DEBUG]  No CMOS option 'touchpad'.
[INFO ]  PMH7: ID 05 Revision 12
[DEBUG]  PNP: 00ff.1 enabled
[INFO ]  H8: EC Firmware ID GLHT30WW-3.23, Version 3.01B
[DEBUG]  No CMOS option 'bluetooth'.
[INFO ]  H8: WWAN detection not implemented. Assuming WWAN installed
[DEBUG]  No CMOS option 'wwan'.
[DEBUG]  PNP: 00ff.2 enabled
[DEBUG]  PNP: 0c31.0 enabled
[DEBUG]  scan_bus: bus PCI: 00:1f.0 finished in 3 msecs
[DEBUG]  PCI: 00:1f.3 scanning...
[DEBUG]  scan_bus: bus PCI: 00:1f.3 finished in 0 msecs
[DEBUG]  scan_bus: bus DOMAIN: 0000 finished in 3 msecs
[DEBUG]  scan_bus: bus Root Device finished in 3 msecs
[INFO ]  done
[DEBUG]  BS: BS_DEV_ENUMERATE run times (exec / console): 4 / 0 ms
[DEBUG]  found VGA at PCI: 00:02.0
[DEBUG]  Setting up VGA for PCI: 00:02.0
[DEBUG]  Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000
[DEBUG]  Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
[INFO ]  Allocating resources...
[INFO ]  Reading resources...
[DEBUG]  mc_add_fixed_mmio_resources: Adding MCHBAR @ 48 0xfed10000-0xfed17fff.
[DEBUG]  mc_add_fixed_mmio_resources: Adding DMIBAR @ 68 0xfed18000-0xfed18fff.
[DEBUG]  mc_add_fixed_mmio_resources: Adding EPBAR @ 40 0xfed19000-0xfed19fff.
[DEBUG]  mc_add_fixed_mmio_resources: Adding GDXCBAR @ 5420 0xfed84000-0xfed84fff.
[DEBUG]  mc_add_fixed_mmio_resources: Adding EDRAMBAR @ 5408 0xfed80000-0xfed83fff.
[DEBUG]  Adding PCIe enhanced config space BAR 0xf0000000-0xf4000000.
[DEBUG]  MC MAP: TOM: 0x400000000
[DEBUG]  MC MAP: TOUUD: 0x47de00000
[DEBUG]  MC MAP: MESEG_BASE: 0x7ffff00000
[DEBUG]  MC MAP: MESEG_LIMIT: 0xfffff
[DEBUG]  MC MAP: REMAP_BASE: 0x400000000
[DEBUG]  MC MAP: REMAP_LIMIT: 0x47ddfffff
[DEBUG]  MC MAP: TOLUD: 0x82200000
[DEBUG]  MC MAP: BGSM: 0x80000000
[DEBUG]  MC MAP: BDSM: 0x80200000
[DEBUG]  MC MAP: TSEGMB: 0x7f800000
[DEBUG]  MC MAP: GGC: 0x209
[DEBUG]  MC MAP: DPR: 0x7f800001
[INFO ]  Available memory above 4GB: 14302M
[ERROR]  PNP: 00ff.1 missing read_resources
[ERROR]  PNP: 00ff.2 missing read_resources
[INFO ]  Done reading resources.
[INFO ]  === Resource allocator: DOMAIN: 0000 - Pass 1 (relative placement) ===
[DEBUG]   PCI: 00:1c.0 io: size: 0 align: 12 gran: 12 limit: ffff
[DEBUG]   PCI: 00:1c.0 io: size: 0 align: 12 gran: 12 limit: ffff done
[DEBUG]   PCI: 00:1c.0 mem: size: 0 align: 20 gran: 20 limit: ffffffff
[DEBUG]    PCI: 02:00.0 10 *  [0x0 - 0xfff] mem
[DEBUG]   PCI: 00:1c.0 mem: size: 100000 align: 20 gran: 20 limit: ffffffff done
[DEBUG]   PCI: 00:1c.0 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff
[DEBUG]   PCI: 00:1c.0 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff done
[DEBUG]   PCI: 00:1c.1 io: size: 0 align: 12 gran: 12 limit: ffff
[DEBUG]   PCI: 00:1c.1 io: size: 0 align: 12 gran: 12 limit: ffff done
[DEBUG]   PCI: 00:1c.1 mem: size: 0 align: 20 gran: 20 limit: ffffffff
[DEBUG]    PCI: 03:00.0 10 *  [0x0 - 0x1fff] mem
[DEBUG]   PCI: 00:1c.1 mem: size: 100000 align: 20 gran: 20 limit: ffffffff done
[DEBUG]   PCI: 00:1c.1 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff
[DEBUG]   PCI: 00:1c.1 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff done
[INFO ]  === Resource allocator: DOMAIN: 0000 - Pass 2 (allocating resources) ===
[DEBUG]  DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff
[DEBUG]   avoid_fixed_resources: PCI: 00:1f.0 00 base 00000000 limit 00000fff io (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:1f.0 84 base 00001600 limit 0000167f io (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:1f.0 88 base 000015e0 limit 000015ef io (fixed)
[DEBUG]   avoid_fixed_resources: PNP: 00ff.1 77 base 000015e0 limit 000015ef io (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:1f.3 20 base 00000400 limit 0000041f io (fixed)
[INFO ]   DOMAIN: 0000: Resource ranges:
[INFO ]   * Base: 1000, Size: 5e0, Tag: 100
[INFO ]   * Base: 15f0, Size: 10, Tag: 100
[INFO ]   * Base: 1680, Size: e980, Tag: 100
[DEBUG]    PCI: 00:02.0 20 *  [0x1000 - 0x103f] limit: 103f io
[DEBUG]    PCI: 00:19.0 18 *  [0x1040 - 0x105f] limit: 105f io
[DEBUG]    PCI: 00:1f.2 20 *  [0x1060 - 0x107f] limit: 107f io
[DEBUG]    PCI: 00:1f.2 10 *  [0x1080 - 0x1087] limit: 1087 io
[DEBUG]    PCI: 00:1f.2 18 *  [0x1088 - 0x108f] limit: 108f io
[DEBUG]    PCI: 00:1f.2 14 *  [0x1090 - 0x1093] limit: 1093 io
[DEBUG]    PCI: 00:1f.2 1c *  [0x1094 - 0x1097] limit: 1097 io
[DEBUG]  DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff done
[DEBUG]  DOMAIN: 0000 mem: base: 7f800000 size: 0 align: 0 gran: 0 limit: fdffffff
[DEBUG]  DOMAIN: 0000 mem: base: 100000000 size: 0 align: 0 gran: 0 limit: 7fffffffff
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 48 base fed10000 limit fed17fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 68 base fed18000 limit fed18fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 40 base fed19000 limit fed19fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 5420 base fed84000 limit fed84fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 5408 base fed80000 limit fed83fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 60 base f0000000 limit f3ffffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 00 base fed90000 limit fed90fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 01 base fed91000 limit fed91fff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 02 base 00000000 limit 0009ffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 03 base 000c0000 limit 7f7fffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 04 base 7f800000 limit 7fffffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 05 base 80000000 limit 821fffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 06 base 100000000 limit 47ddfffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 07 base 000a0000 limit 000bffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:00.0 08 base 000c0000 limit 000fffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PCI: 00:1f.0 31fe base fec00000 limit ffffffff mem (fixed)
[DEBUG]   avoid_fixed_resources: PNP: 0c31.0 00 base fed40000 limit fed44fff mem (fixed)
[INFO ]   DOMAIN: 0000: Resource ranges:
[INFO ]   * Base: 82200000, Size: 6de00000, Tag: 200
[INFO ]   * Base: f4000000, Size: a000000, Tag: 200
[INFO ]   * Base: 47de00000, Size: 7b82200000, Tag: 200
[DEBUG]    PCI: 00:02.0 18 *  [0x90000000 - 0x9fffffff] limit: 9fffffff prefmem
[DEBUG]    PCI: 00:02.0 10 *  [0x82400000 - 0x827fffff] limit: 827fffff mem
[DEBUG]    PCI: 00:1c.0 20 *  [0x82200000 - 0x822fffff] limit: 822fffff mem
[DEBUG]    PCI: 00:1c.1 20 *  [0x82300000 - 0x823fffff] limit: 823fffff mem
[DEBUG]    PCI: 00:19.0 10 *  [0x82800000 - 0x8281ffff] limit: 8281ffff mem
[DEBUG]    PCI: 00:14.0 10 *  [0x82820000 - 0x8282ffff] limit: 8282ffff mem
[DEBUG]    PCI: 00:04.0 10 *  [0x82830000 - 0x82837fff] limit: 82837fff mem
[DEBUG]    PCI: 00:03.0 10 *  [0x82838000 - 0x8283bfff] limit: 8283bfff mem
[DEBUG]    PCI: 00:1b.0 10 *  [0x8283c000 - 0x8283ffff] limit: 8283ffff mem
[DEBUG]    PCI: 00:19.0 14 *  [0x82840000 - 0x82840fff] limit: 82840fff mem
[DEBUG]    PCI: 00:1f.2 24 *  [0x82841000 - 0x828417ff] limit: 828417ff mem
[DEBUG]    PCI: 00:1a.0 10 *  [0x82842000 - 0x828423ff] limit: 828423ff mem
[DEBUG]    PCI: 00:1d.0 10 *  [0x82843000 - 0x828433ff] limit: 828433ff mem
[DEBUG]    PCI: 00:1f.3 10 *  [0x82844000 - 0x828440ff] limit: 828440ff mem
[DEBUG]    PCI: 00:16.0 10 *  [0x82845000 - 0x8284500f] limit: 8284500f mem
[DEBUG]  DOMAIN: 0000 mem: base: 7f800000 size: 0 align: 0 gran: 0 limit: fdffffff done
[DEBUG]  DOMAIN: 0000 mem: base: 100000000 size: 0 align: 0 gran: 0 limit: 7fffffffff done
[DEBUG]    PCI: 02:00.0 10 *  [0x82200000 - 0x82200fff] limit: 82200fff mem
[DEBUG]    PCI: 03:00.0 10 *  [0x82300000 - 0x82301fff] limit: 82301fff mem
[INFO ]  === Resource allocator: DOMAIN: 0000 - resource allocation complete ===
[DEBUG]  PCI: 00:01.1 1c <- [0x000000000000ffff - 0x000000000000fffe] size 0x00000000 gran 0x0c bus 01 io
[DEBUG]  PCI: 00:01.1 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 bus 01 prefmem
[DEBUG]  PCI: 00:01.1 20 <- [0x00000000ffffffff - 0x00000000fffffffe] size 0x00000000 gran 0x14 bus 01 mem
[DEBUG]  PCI: 00:02.0 10 <- [0x0000000082400000 - 0x00000000827fffff] size 0x00400000 gran 0x16 mem64
[DEBUG]  PCI: 00:02.0 18 <- [0x0000000090000000 - 0x000000009fffffff] size 0x10000000 gran 0x1c prefmem64
[DEBUG]  PCI: 00:02.0 20 <- [0x0000000000001000 - 0x000000000000103f] size 0x00000040 gran 0x06 io
[DEBUG]  PCI: 00:03.0 10 <- [0x0000000082838000 - 0x000000008283bfff] size 0x00004000 gran 0x0e mem64
[DEBUG]  PCI: 00:04.0 10 <- [0x0000000082830000 - 0x0000000082837fff] size 0x00008000 gran 0x0f mem64
[DEBUG]  PCI: 00:14.0 10 <- [0x0000000082820000 - 0x000000008282ffff] size 0x00010000 gran 0x10 mem64
[DEBUG]  PCI: 00:16.0 10 <- [0x0000000082845000 - 0x000000008284500f] size 0x00000010 gran 0x04 mem64
[DEBUG]  PCI: 00:19.0 10 <- [0x0000000082800000 - 0x000000008281ffff] size 0x00020000 gran 0x11 mem
[DEBUG]  PCI: 00:19.0 14 <- [0x0000000082840000 - 0x0000000082840fff] size 0x00001000 gran 0x0c mem
[DEBUG]  PCI: 00:19.0 18 <- [0x0000000000001040 - 0x000000000000105f] size 0x00000020 gran 0x05 io
[DEBUG]  PCI: 00:1a.0 10 <- [0x0000000082842000 - 0x00000000828423ff] size 0x00000400 gran 0x0a mem
[DEBUG]  PCI: 00:1b.0 10 <- [0x000000008283c000 - 0x000000008283ffff] size 0x00004000 gran 0x0e mem64
[DEBUG]  PCI: 00:1c.0 1c <- [0x000000000000ffff - 0x000000000000fffe] size 0x00000000 gran 0x0c bus 02 io
[DEBUG]  PCI: 00:1c.0 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 bus 02 prefmem
[DEBUG]  PCI: 00:1c.0 20 <- [0x0000000082200000 - 0x00000000822fffff] size 0x00100000 gran 0x14 bus 02 mem
[DEBUG]  PCI: 02:00.0 10 <- [0x0000000082200000 - 0x0000000082200fff] size 0x00001000 gran 0x0c mem
[DEBUG]  PCI: 00:1c.1 1c <- [0x000000000000ffff - 0x000000000000fffe] size 0x00000000 gran 0x0c bus 03 io
[DEBUG]  PCI: 00:1c.1 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 bus 03 prefmem
[DEBUG]  PCI: 00:1c.1 20 <- [0x0000000082300000 - 0x00000000823fffff] size 0x00100000 gran 0x14 bus 03 mem
[DEBUG]  PCI: 03:00.0 10 <- [0x0000000082300000 - 0x0000000082301fff] size 0x00002000 gran 0x0d mem64
[DEBUG]  PCI: 00:1d.0 10 <- [0x0000000082843000 - 0x00000000828433ff] size 0x00000400 gran 0x0a mem
[ERROR]  PNP: 00ff.1 missing set_resources
[ERROR]  PNP: 00ff.2 missing set_resources
[DEBUG]  PCI: 00:1f.2 10 <- [0x0000000000001080 - 0x0000000000001087] size 0x00000008 gran 0x03 io
[DEBUG]  PCI: 00:1f.2 14 <- [0x0000000000001090 - 0x0000000000001093] size 0x00000004 gran 0x02 io
[DEBUG]  PCI: 00:1f.2 18 <- [0x0000000000001088 - 0x000000000000108f] size 0x00000008 gran 0x03 io
[DEBUG]  PCI: 00:1f.2 1c <- [0x0000000000001094 - 0x0000000000001097] size 0x00000004 gran 0x02 io
[DEBUG]  PCI: 00:1f.2 20 <- [0x0000000000001060 - 0x000000000000107f] size 0x00000020 gran 0x05 io
[DEBUG]  PCI: 00:1f.2 24 <- [0x0000000082841000 - 0x00000000828417ff] size 0x00000800 gran 0x0b mem
[DEBUG]  PCI: 00:1f.3 10 <- [0x0000000082844000 - 0x00000000828440ff] size 0x00000100 gran 0x08 mem64
[INFO ]  Done setting resources.
[INFO ]  Done allocating resources.
[DEBUG]  BS: BS_DEV_RESOURCES run times (exec / console): 2 / 0 ms
[INFO ]  Enabling resources...
[DEBUG]  PCI: 00:00.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:00.0 cmd <- 06
[DEBUG]  PCI: 00:01.1 bridge ctrl <- 0013
[DEBUG]  PCI: 00:01.1 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:01.1 cmd <- 00
[DEBUG]  PCI: 00:02.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:02.0 cmd <- 03
[DEBUG]  PCI: 00:03.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:03.0 cmd <- 02
[DEBUG]  PCI: 00:04.0 cmd <- 02
[DEBUG]  PCI: 00:14.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:14.0 cmd <- 102
[DEBUG]  PCI: 00:16.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:16.0 cmd <- 02
[DEBUG]  PCI: 00:19.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:19.0 cmd <- 103
[DEBUG]  PCI: 00:1a.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1a.0 cmd <- 102
[DEBUG]  PCI: 00:1b.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1b.0 cmd <- 102
[DEBUG]  PCI: 00:1c.0 bridge ctrl <- 0013
[DEBUG]  PCI: 00:1c.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1c.0 cmd <- 06
[DEBUG]  PCI: 00:1c.1 bridge ctrl <- 0013
[DEBUG]  PCI: 00:1c.1 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1c.1 cmd <- 06
[DEBUG]  PCI: 00:1d.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1d.0 cmd <- 102
[DEBUG]  PCI: 00:1f.0 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1f.0 cmd <- 107
[DEBUG]  PCI: 00:1f.2 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1f.2 cmd <- 103
[DEBUG]  PCI: 00:1f.3 subsystem <- 17aa/220e
[DEBUG]  PCI: 00:1f.3 cmd <- 103
[DEBUG]  PCI: 02:00.0 cmd <- 02
[DEBUG]  PCI: 03:00.0 cmd <- 02
[INFO ]  done.
[INFO ]  Initializing devices...
[DEBUG]  CPU_CLUSTER: 0 init
[DEBUG]  MTRR: Physical address space:
[DEBUG]  0x0000000000000000 - 0x000000000009ffff size 0x000a0000 type 6
[DEBUG]  0x00000000000a0000 - 0x00000000000bffff size 0x00020000 type 0
[DEBUG]  0x00000000000c0000 - 0x000000007fffffff size 0x7ff40000 type 6
[DEBUG]  0x0000000080000000 - 0x000000008fffffff size 0x10000000 type 0
[DEBUG]  0x0000000090000000 - 0x000000009fffffff size 0x10000000 type 1
[DEBUG]  0x00000000a0000000 - 0x00000000ffffffff size 0x60000000 type 0
[DEBUG]  0x0000000100000000 - 0x000000047ddfffff size 0x37de00000 type 6
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x250 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x258 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x259 0x0000000000000000
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x268 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x269 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26a 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26b 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26c 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26d 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26e 0x0606060606060606
[DEBUG]  apic_id 0x0: MTRR: Fixed MSR 0x26f 0x0606060606060606
[DEBUG]  apic_id 0x0 setup mtrr for CPU physical address size: 39 bits
[DEBUG]  MTRR: default type WB/UC MTRR counts: 4/5.
[DEBUG]  MTRR: WB selected as default type.
[DEBUG]  MTRR: 0 base 0x0000000080000000 mask 0x0000007ff0000000 type 0
[DEBUG]  MTRR: 1 base 0x0000000090000000 mask 0x0000007ff0000000 type 1
[DEBUG]  MTRR: 2 base 0x00000000a0000000 mask 0x0000007fe0000000 type 0
[DEBUG]  MTRR: 3 base 0x00000000c0000000 mask 0x0000007fc0000000 type 0

[DEBUG]  MTRR check
[DEBUG]  Fixed MTRRs   : Enabled
[DEBUG]  Variable MTRRs: Enabled

[DEBUG]  Initializing VR config.
[DEBUG]  CPU has 2 cores, 4 threads enabled.
[DEBUG]  Setting up SMI for CPU
[INFO ]  Will perform SMM setup.
[INFO ]  CBFS: Found 'cpu_microcode_blob.bin' @0xc500 size 0xf800 in mcache @0x7f7dd0ac
[DEBUG]  microcode: sig=0x306c3 pf=0x10 revision=0x28
[INFO ]  CPU: Intel(R) Core(TM) i7-4600M CPU @ 2.90GHz.
[INFO ]  LAPIC 0x0 in XAPIC mode.
[DEBUG]  CPU: APIC: 00 enabled
[DEBUG]  CPU: APIC: 01 enabled
[DEBUG]  CPU: APIC: 02 enabled
[DEBUG]  CPU: APIC: 03 enabled
[DEBUG]  Loading module at 0x00030000 with entry 0x00030000. filesize: 0x178 memsize: 0x178
[DEBUG]  Processing 16 relocs. Offset value of 0x00030000
[DEBUG]  Attempting to start 3 APs
[DEBUG]  Waiting for 10ms after sending INIT.
[DEBUG]  Waiting for SIPI to complete...
[DEBUG]  done.
[DEBUG]  Waiting for SIPI to complete...
[DEBUG]  done.
[INFO ]  LAPIC 0x1 in XAPIC mode.
[INFO ]  AP: slot 1 apic_id 1, MCU rev: 0x00000028
[INFO ]  LAPIC 0x2 in XAPIC mode.
[INFO ]  LAPIC 0x3 in XAPIC mode.
[INFO ]  AP: slot 2 apic_id 2, MCU rev: 0x00000028
[INFO ]  AP: slot 3 apic_id 3, MCU rev: 0x00000028
[DEBUG]  Loading module at 0x00038000 with entry 0x00038000. filesize: 0x1a0 memsize: 0x1a0
[DEBUG]  Processing 9 relocs. Offset value of 0x00038000
[DEBUG]  smm_module_setup_stub: stack_top = 0x7f801000
[DEBUG]  smm_module_setup_stub: per cpu stack_size = 0x400
[DEBUG]  smm_module_setup_stub: runtime.smm_size = 0x10000
[DEBUG]  SMM Module: stub loaded at 38000. Will call 0x7f7a0c2a
[DEBUG]  Installing permanent SMM handler to 0x7f800000
[DEBUG]  HANDLER      [0x7fafb000-0x7faff750]

[DEBUG]  CPU 0
[DEBUG]    ss0        [0x7fafac00-0x7fafb000]
[DEBUG]    stub0      [0x7faf3000-0x7faf31a0]

[DEBUG]  CPU 1
[DEBUG]    ss1        [0x7fafa800-0x7fafac00]
[DEBUG]    stub1      [0x7faf2c00-0x7faf2da0]

[DEBUG]  CPU 2
[DEBUG]    ss2        [0x7fafa400-0x7fafa800]
[DEBUG]    stub2      [0x7faf2800-0x7faf29a0]

[DEBUG]  CPU 3
[DEBUG]    ss3        [0x7fafa000-0x7fafa400]
[DEBUG]    stub3      [0x7faf2400-0x7faf25a0]

[DEBUG]  stacks       [0x7f800000-0x7f801000]
[DEBUG]  Loading module at 0x7fafb000 with entry 0x7fafbeff. filesize: 0x4628 memsize: 0x4750
[DEBUG]  Processing 270 relocs. Offset value of 0x7fafb000
[DEBUG]  Loading module at 0x7faf3000 with entry 0x7faf3000. filesize: 0x1a0 memsize: 0x1a0
[DEBUG]  Processing 9 relocs. Offset value of 0x7faf3000
[DEBUG]  smm_module_setup_stub: stack_top = 0x7f801000
[DEBUG]  smm_module_setup_stub: per cpu stack_size = 0x400
[DEBUG]  smm_module_setup_stub: runtime.smm_size = 0x300000
[DEBUG]  SMM Module: placing smm entry code at 7faf2c00,  cpu # 0x1
[DEBUG]  SMM Module: placing smm entry code at 7faf2800,  cpu # 0x2
[DEBUG]  SMM Module: placing smm entry code at 7faf2400,  cpu # 0x3
[DEBUG]  SMM Module: stub loaded at 7faf3000. Will call 0x7fafbeff
[DEBUG]  SMI_STS: MCSMI 
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x7faeb000, cpu = 0
[DEBUG]  In relocation handler: CPU 0
[DEBUG]  New SMBASE=0x7faeb000 IEDBASE=0x7fc00000
[DEBUG]  Writing SMRR. base = 0x7f800006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x7faeac00, cpu = 1
[DEBUG]  In relocation handler: CPU 1
[DEBUG]  New SMBASE=0x7faeac00 IEDBASE=0x7fc00000
[DEBUG]  Writing SMRR. base = 0x7f800006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x7faea800, cpu = 2
[DEBUG]  In relocation handler: CPU 2
[DEBUG]  New SMBASE=0x7faea800 IEDBASE=0x7fc00000
[DEBUG]  Writing SMRR. base = 0x7f800006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x7faea400, cpu = 3
[DEBUG]  In relocation handler: CPU 3
[DEBUG]  New SMBASE=0x7faea400 IEDBASE=0x7fc00000
[DEBUG]  Writing SMRR. base = 0x7f800006, mask=0xff800800
[DEBUG]  Relocation complete.
[INFO ]  microcode: Update skipped, already up-to-date
[INFO ]  Initializing CPU #0
[DEBUG]  CPU: vendor Intel device 306c3
[DEBUG]  CPU: family 06, model 3c, stepping 03
[DEBUG]  IA32_FEATURE_CONTROL already locked; VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL already locked
[DEBUG]  cpu: energy policy set to 6
[INFO ]  Turbo is available but hidden
[INFO ]  Turbo is available and visible
[INFO ]  CPU #0 initialized
[INFO ]  Initializing CPU #1
[INFO ]  Initializing CPU #3
[INFO ]  Initializing CPU #2
[DEBUG]  CPU: vendor Intel device 306c3
[DEBUG]  CPU: family 06, model 3c, stepping 03
[DEBUG]  CPU: vendor Intel device 306c3
[DEBUG]  CPU: family 06, model 3c, stepping 03
[DEBUG]  CPU: vendor Intel device 306c3
[DEBUG]  CPU: family 06, model 3c, stepping 03
[DEBUG]  IA32_FEATURE_CONTROL already locked; VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL already locked
[DEBUG]  IA32_FEATURE_CONTROL already locked; VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL already locked; VMX status: enabled
[DEBUG]  IA32_FEATURE_CONTROL already locked
[DEBUG]  IA32_FEATURE_CONTROL already locked
[DEBUG]  cpu: energy policy set to 6
[INFO ]  CPU #3 initialized
[DEBUG]  cpu: energy policy set to 6
[INFO ]  CPU #1 initialized
[DEBUG]  cpu: energy policy set to 6
[INFO ]  CPU #2 initialized
[INFO ]  bsp_do_flight_plan done after 2 msecs.
[DEBUG]  CPU: frequency set to 3600
[DEBUG]  Enabling SMIs.
[DEBUG]  Locking SMM.
[DEBUG]  CPU_CLUSTER: 0 init finished in 12 msecs
[DEBUG]  PCI: 00:00.0 init
[DEBUG]  Disabling PEG12.
[DEBUG]  Disabling PEG10.
[DEBUG]  Disabling "device 7".
[DEBUG]  Set BIOS_RESET_CPL
[DEBUG]  CPU TDP: 37 Watts
[DEBUG]  PCI: 00:00.0 init finished in 1 msecs
[DEBUG]  PCI: 00:01.1 init
[DEBUG]  PCI: 00:01.1 init finished in 0 msecs
[DEBUG]  PCI: 00:02.0 init
[INFO ]  CBFS: Found 'vbt.bin' @0x3e480 size 0x582 in mcache @0x7f7dd204
[INFO ]  Found a VBT of 4608 bytes after decompression
[INFO ]  GMA: Found VBT in CBFS
[INFO ]  GMA: Found valid VBT in CBFS
[DEBUG]  GT Power Management Init
[INFO ]  GMA: Setting backlight PWM frequency to 135MHz / 128 / 4794 = 220Hz
[INFO ]  framebuffer_info: bytes_per_line: 4096, bits_per_pixel: 32
[INFO ]                     x_res x y_res: 1024 x 768, size: 3145728 at 0x90000000
[DEBUG]  GT Power Management Init (post VBIOS)
[DEBUG]  PCI: 00:02.0 init finished in 224 msecs
[DEBUG]  PCI: 00:03.0 init
[DEBUG]  Mini-HD: base = 0x82838000
[DEBUG]  azalia_audio: Initializing codec #0
[DEBUG]  azalia_audio: codec viddid: 80862807
[DEBUG]  azalia_audio: verb_size: 16
[DEBUG]  azalia_audio: verb loaded.
[DEBUG]  PCI: 00:03.0 init finished in 3 msecs
[DEBUG]  PCI: 00:04.0 init
[DEBUG]  PCI: 00:04.0 init finished in 0 msecs
[DEBUG]  PCI: 00:14.0 init
[DEBUG]  PCI: 00:14.0 init finished in 0 msecs
[DEBUG]  PCI: 00:16.0 init
[DEBUG]  ME: FW Partition Table      : OK
[DEBUG]  ME: Bringup Loader Failure  : NO
[DEBUG]  ME: Firmware Init Complete  : NO
[DEBUG]  ME: Manufacturing Mode      : YES
[DEBUG]  ME: Boot Options Present    : NO
[DEBUG]  ME: Update In Progress      : NO
[DEBUG]  ME: Current Working State   : Initializing
[DEBUG]  ME: Current Operation State : Bring up
[DEBUG]  ME: Current Operation Mode  : Debug
[DEBUG]  ME: Error Code              : No Error
[DEBUG]  ME: Progress Phase          : BUP Phase
[DEBUG]  ME: Power Management Event  : Pseudo-global reset
[DEBUG]  ME: Progress Phase State    : 0x4d
[CRIT ]  intel_me_path: mbp is not ready!
[NOTE ]  ME: BIOS path: Error
[ERROR]  ME: MBP not ready
[DEBUG]  PCI: 00:16.0 init finished in 0 msecs
[DEBUG]  PCI: 00:19.0 init
[DEBUG]  PCI: 00:19.0 init finished in 0 msecs
[DEBUG]  PCI: 00:1a.0 init
[DEBUG]  EHCI: Setting up controller.. done.
[DEBUG]  PCI: 00:1a.0 init finished in 0 msecs
[DEBUG]  PCI: 00:1b.0 init
[DEBUG]  Azalia: base = 0x8283c000
[DEBUG]  Azalia: codec_mask = 01
[DEBUG]  azalia_audio: Initializing codec #0
[DEBUG]  azalia_audio: codec viddid: 10ec0292
[DEBUG]  azalia_audio: verb_size: 128
[DEBUG]  azalia_audio: verb loaded.
[DEBUG]  PCI: 00:1b.0 init finished in 7 msecs
[DEBUG]  PCI: 00:1c.0 init
[DEBUG]  Initializing PCH PCIe bridge.
[DEBUG]  PCI: 00:1c.0 init finished in 0 msecs
[DEBUG]  PCI: 00:1c.1 init
[DEBUG]  Initializing PCH PCIe bridge.
[DEBUG]  PCI: 00:1c.1 init finished in 0 msecs
[DEBUG]  PCI: 00:1d.0 init
[DEBUG]  EHCI: Setting up controller.. done.
[DEBUG]  PCI: 00:1d.0 init finished in 0 msecs
[DEBUG]  PCI: 00:1f.0 init
[DEBUG]  pch: lpc_init
[DEBUG]  IOAPIC: Initializing IOAPIC at 0xfec00000
[DEBUG]  IOAPIC: ID = 0x00
[DEBUG]  IOAPIC: 24 interrupts
[DEBUG]  IOAPIC: Clearing IOAPIC at 0xfec00000
[DEBUG]  IOAPIC: Bootstrap Processor Local APIC = 0x00
[INFO ]  Set power off after power failure.
[INFO ]  NMI sources enabled.
[DEBUG]  LynxPoint H PM init
[DEBUG]  RTC: failed = 0x0
[DEBUG]  RTC Init
[DEBUG]  apm_control: Disabling ACPI.
[DEBUG]  APMC done.
[DEBUG]  PCI: 00:1f.0 init finished in 0 msecs
[DEBUG]  PCI: 00:1f.2 init
[DEBUG]  SATA: Initializing...
[DEBUG]  SATA: Controller in AHCI mode.
[DEBUG]  ABAR: 0x82841000
[DEBUG]  PCI: 00:1f.2 init finished in 0 msecs
[DEBUG]  PCI: 00:1f.3 init
[DEBUG]  PCI: 00:1f.3 init finished in 0 msecs
[DEBUG]  PCI: 02:00.0 init
[DEBUG]  PCI: 02:00.0 init finished in 0 msecs
[DEBUG]  PCI: 03:00.0 init
[DEBUG]  PCI: 03:00.0 init finished in 0 msecs
[DEBUG]  PNP: 00ff.2 init
[DEBUG]  PNP: 00ff.2 init finished in 0 msecs
[INFO ]  Devices initialized
[DEBUG]  BS: BS_DEV_INIT run times (exec / console): 250 / 0 ms
[DEBUG]  FMAP: area SMMSTORE found @ 810000 (262144 bytes)
[DEBUG]  flash size 0x2800000 bytes
[INFO ]  SF: Detected 00 0000 with sector size 0x1000, total 0x2800000
[ERROR]  SF size 0x2800000 does not correspond to CONFIG_ROM_SIZE 0xc00000!!
[DEBUG]  smm store: 4 # blocks with size 0x10000
[INFO ]  SMMSTORE: Setting up SMI handler
[INFO ]  Found TPM ST33ZP24 by ST Microelectronics
[DEBUG]  TPM: Startup
[DEBUG]  TPM: command 0x99 returned 0x0
[DEBUG]  TPM: Asserting physical presence
[DEBUG]  TPM: command 0x4000000a returned 0x0
[DEBUG]  TPM: command 0x65 returned 0x0
[DEBUG]  TPM: flags disable=0, deactivated=0, nvlocked=1
[INFO ]  TPM: setup succeeded
[DEBUG]  BS: BS_DEV_INIT exit times (exec / console): 57 / 0 ms
[INFO ]  Finalize devices...
[DEBUG]  PCI: 00:00.0 final
[DEBUG]  PCI: 00:16.0 final
[INFO ]  ME: MBP cleared
[DEBUG]  PCI: 00:1b.0 final
[DEBUG]  PCI: 00:1f.0 final
[DEBUG]  apm_control: Finalizing SMM.
[DEBUG]  APMC done.
[INFO ]  Devices finalized
[INFO ]  CBFS: Found 'fallback/dsdt.aml' @0x3adc0 size 0x367a in mcache @0x7f7dd1d8
[WARN ]  CBFS: 'fallback/slic' not found.
[INFO ]  ACPI: Writing ACPI tables at 7f730000.
[DEBUG]  ACPI:    * FACS
[DEBUG]  ACPI:    * DSDT
[DEBUG]  ACPI:    * FADT
[DEBUG]  ACPI: added table 1/32, length now 40
[DEBUG]  ACPI:     * SSDT
[DEBUG]  Found 1 CPU(s) with 4 core(s) each.
[DEBUG]  PSS: 2901MHz power 37000 control 0x2400 status 0x2400
[DEBUG]  PSS: 2900MHz power 37000 control 0x1d00 status 0x1d00
[DEBUG]  PSS: 2400MHz power 28854 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 22943 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 17471 control 0x1000 status 0x1000
[DEBUG]  PSS: 1200MHz power 12469 control 0xc00 status 0xc00
[DEBUG]  PSS: 800MHz power 7885 control 0x800 status 0x800
[DEBUG]  PSS: 2901MHz power 37000 control 0x2400 status 0x2400
[DEBUG]  PSS: 2900MHz power 37000 control 0x1d00 status 0x1d00
[DEBUG]  PSS: 2400MHz power 28854 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 22943 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 17471 control 0x1000 status 0x1000
[DEBUG]  PSS: 1200MHz power 12469 control 0xc00 status 0xc00
[DEBUG]  PSS: 800MHz power 7885 control 0x800 status 0x800
[DEBUG]  PSS: 2901MHz power 37000 control 0x2400 status 0x2400
[DEBUG]  PSS: 2900MHz power 37000 control 0x1d00 status 0x1d00
[DEBUG]  PSS: 2400MHz power 28854 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 22943 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 17471 control 0x1000 status 0x1000
[DEBUG]  PSS: 1200MHz power 12469 control 0xc00 status 0xc00
[DEBUG]  PSS: 800MHz power 7885 control 0x800 status 0x800
[DEBUG]  PSS: 2901MHz power 37000 control 0x2400 status 0x2400
[DEBUG]  PSS: 2900MHz power 37000 control 0x1d00 status 0x1d00
[DEBUG]  PSS: 2400MHz power 28854 control 0x1800 status 0x1800
[DEBUG]  PSS: 2000MHz power 22943 control 0x1400 status 0x1400
[DEBUG]  PSS: 1600MHz power 17471 control 0x1000 status 0x1000
[DEBUG]  PSS: 1200MHz power 12469 control 0xc00 status 0xc00
[DEBUG]  PSS: 800MHz power 7885 control 0x800 status 0x800
[DEBUG]  Generating ACPI PIRQ entries
[INFO ]  ACPI:    * H8
[INFO ]  H8: BDC detection not implemented. Assuming BDC installed
[INFO ]  H8: WWAN detection not implemented. Assuming WWAN installed
[INFO ]  \_SB_.PCI0.TPM: LPC TPM PNP: 0c31.0
[DEBUG]  ACPI: added table 2/32, length now 44
[DEBUG]  ACPI:    * MCFG
[DEBUG]  ACPI: added table 3/32, length now 48
[DEBUG]  ACPI:    * TCPA
[DEBUG]  TCPA log created at 0x7f720000
[DEBUG]  ACPI: added table 4/32, length now 52
[DEBUG]  ACPI:    * MADT
[DEBUG]  IOAPIC: 24 interrupts
[DEBUG]  ACPI: added table 5/32, length now 56
[DEBUG]  ACPI:    * SPCR
[DEBUG]  current = 7f7352c0
[DEBUG]  ACPI:    * DMAR
[DEBUG]  ACPI: added table 6/32, length now 60
[DEBUG]  ACPI:    * HPET
[DEBUG]  ACPI: added table 7/32, length now 64
[DEBUG]  current = 7f7353c0
[INFO ]  ACPI: done.
[DEBUG]  ACPI tables: 21440 bytes.
[DEBUG]  smbios_write_tables: 7f718000
[DEBUG]  SMBIOS firmware version is set to coreboot_version: '4.20-521-g0a810a2881'
[INFO ]  Create SMBIOS type 16
[INFO ]  Create SMBIOS type 17
[INFO ]  Create SMBIOS type 20
[INFO ]  PCI: 03:00.0 (unknown)
[DEBUG]  SMBIOS tables: 1119 bytes.
[DEBUG]  Writing table forward entry at 0x00000500
[DEBUG]  Wrote coreboot table at: 0x00000500, 0x10 bytes, checksum 4069
[DEBUG]  Writing coreboot table at 0x7f754000
[INFO ]  CBFS: Found 'cmos_layout.bin' @0x3eb80 size 0x510 in mcache @0x7f7dd25c
[DEBUG]   0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
[DEBUG]   1. 0000000000001000-000000000009ffff: RAM
[DEBUG]   2. 00000000000a0000-00000000000fffff: RESERVED
[DEBUG]   3. 0000000000100000-000000007f717fff: RAM
[DEBUG]   4. 000000007f718000-000000007f780fff: CONFIGURATION TABLES
[DEBUG]   5. 000000007f781000-000000007f7cdfff: RAMSTAGE
[DEBUG]   6. 000000007f7ce000-000000007f7fffff: CONFIGURATION TABLES
[DEBUG]   7. 000000007f800000-00000000821fffff: RESERVED
[DEBUG]   8. 00000000f0000000-00000000f3ffffff: RESERVED
[DEBUG]   9. 00000000fed10000-00000000fed19fff: RESERVED
[DEBUG]  10. 00000000fed40000-00000000fed44fff: RESERVED
[DEBUG]  11. 00000000fed80000-00000000fed84fff: RESERVED
[DEBUG]  12. 00000000fed90000-00000000fed91fff: RESERVED
[DEBUG]  13. 0000000100000000-000000047ddfffff: RAM
[DEBUG]  Wrote coreboot table at: 0x7f754000, 0x95c bytes, checksum 875a
[DEBUG]  coreboot table: 2420 bytes.
[DEBUG]  IMD ROOT    0. 0x7f7ff000 0x00001000
[DEBUG]  IMD SMALL   1. 0x7f7fe000 0x00001000
[DEBUG]  CONSOLE     2. 0x7f7de000 0x00020000
[DEBUG]  RO MCACHE   3. 0x7f7dd000 0x00000378
[DEBUG]  TIME STAMP  4. 0x7f7dc000 0x00000910
[DEBUG]  MEM INFO    5. 0x7f7db000 0x000007a8
[DEBUG]  AFTER CAR   6. 0x7f7ce000 0x0000d000
[DEBUG]  RAMSTAGE    7. 0x7f780000 0x0004e000
[DEBUG]  SMM BACKUP  8. 0x7f770000 0x00010000
[DEBUG]  IGD OPREGION 9. 0x7f76c000 0x00003130
[DEBUG]  SMM COMBUFFER10. 0x7f75c000 0x00010000
[DEBUG]  COREBOOT   11. 0x7f754000 0x00008000
[DEBUG]  ACPI       12. 0x7f730000 0x00024000
[DEBUG]  TCPA TCGLOG13. 0x7f720000 0x00010000
[DEBUG]  SMBIOS     14. 0x7f718000 0x00008000
[DEBUG]  IMD small region:
[DEBUG]    IMD ROOT    0. 0x7f7fec00 0x00000400
[DEBUG]    FMAP        1. 0x7f7feae0 0x0000010a
[DEBUG]    ROMSTAGE    2. 0x7f7feac0 0x00000004
[DEBUG]    ROMSTG STCK 3. 0x7f7fea00 0x000000a8
[DEBUG]    ACPI GNVS   4. 0x7f7fe940 0x000000b0
[DEBUG]  BS: BS_WRITE_TABLES run times (exec / console): 4 / 0 ms
[INFO ]  CBFS: Found 'fallback/payload' @0x44c00 size 0x10e594 in mcache @0x7f7dd2c8
[DEBUG]  Checking segment from ROM address 0xffc94e2c
[DEBUG]  Checking segment from ROM address 0xffc94e48
[DEBUG]  Loading segment from ROM address 0xffc94e2c
[DEBUG]    code (compression=1)
[DEBUG]    New segment dstaddr 0x00800000 memsize 0x1000000 srcaddr 0xffc94e64 filesize 0x10e55c
[DEBUG]  Loading Segment: addr: 0x00800000 memsz: 0x0000000001000000 filesz: 0x000000000010e55c
[DEBUG]  using LZMA
[DEBUG]  Loading segment from ROM address 0xffc94e48
[DEBUG]    Entry Point 0x0080168c
[DEBUG]  BS: BS_PAYLOAD_LOAD run times (exec / console): 348 / 0 ms
[DEBUG]  ICH-NM10-PCH: watchdog disabled
[DEBUG]  Jumping to boot code at 0x0080168c(0x7f754000)