Looking for coreboot table at 0 4096 bytes. Mapping 4096B of physical memory at 0x0 (requested 0x0). Mapping 1320B of physical memory at 0x0 (requested 0x518). ... padding virtual address with 0x518 bytes. Found! coreboot table entry 0x11 Found forwarding entry. Looking for coreboot table at 7ff5f000 4096 bytes. Mapping 4096B of physical memory at 0x7ff5f000 (requested 0x7ff5f000). Mapping 976B of physical memory at 0x7ff5f000 (requested 0x7ff5f018). ... padding virtual address with 0x18 bytes. Found! coreboot table entry 0x01 Found memory map. LB_MEM_TABLE found. LB_MEM_TABLE found. coreboot table entry 0x03 coreboot table entry 0x04 coreboot table entry 0x05 coreboot table entry 0x06 coreboot table entry 0x07 coreboot table entry 0x26 coreboot table entry 0x29 coreboot table entry 0x16 Found timestamp table. cbmem_addr = 7ffdc000 coreboot table entry 0x17 Found cbmem console. cbmem_addr = 7ffde000 coreboot table entry 0x24 coreboot table entry 0x37 coreboot table entry 0x30 coreboot table entry 0x40 coreboot table entry 0x32 Found TSC info. coreboot table entry 0x31 coreboot table entry 0x31 coreboot table entry 0x31 coreboot table entry 0x31 coreboot table entry 0x31 coreboot table entry 0x31 coreboot table entry 0x31 coreboot table entry 0x31 coreboot table entry 0x31 coreboot table entry 0x31 coreboot table entry 0x31 coreboot table entry 0x31 coreboot table entry 0x31 coreboot table entry 0x31 coreboot table entry 0x31 coreboot table entry 0x31 coreboot table entry 0x43 Mapping 8B of physical memory at 0x7ffde000 (requested 0x7ffde000). Mapping 40015B of physical memory at 0x7ffde000 (requested 0x7ffde000). *** Pre-CBMEM romstage console overflowed, log truncated! *** aphics... [DEBUG] Back from systemagent_early_init() [INFO ] Intel ME early init [INFO ] Intel ME firmware is ready [DEBUG] ME: Requested 0MB UMA [DEBUG] Starting native Platform init [DEBUG] DMI: Running at X4 @ 5000MT/s [DEBUG] FMAP: area RW_MRC_CACHE found @ 800000 (65536 bytes) [DEBUG] Trying stored timings. [DEBUG] Starting Ivy Bridge RAM training (fast boot). [DEBUG] 100MHz reference clock support: yes [DEBUG] PLL_REF100_CFG value: 0x7 [DEBUG] Trying CAS 11, tCK 320. [DEBUG] Trying CAS 10, tCK 365. [DEBUG] Trying CAS 9, tCK 384. [DEBUG] Found compatible clock, CAS pair. [DEBUG] Selected DRAM frequency: 666 MHz [DEBUG] Selected CAS latency : 9T [DEBUG] MPLL busy... done in 40 us [DEBUG] MPLL frequency is set at : 666 MHz [DEBUG] Done dimm mapping [DEBUG] Update PCI-E configuration space: [DEBUG] PCI(0, 0, 0)[a0] = 0 [DEBUG] PCI(0, 0, 0)[a4] = 2 [DEBUG] PCI(0, 0, 0)[bc] = 82a00000 [DEBUG] PCI(0, 0, 0)[a8] = 7d600000 [DEBUG] PCI(0, 0, 0)[ac] = 2 [DEBUG] PCI(0, 0, 0)[b8] = 80000000 [DEBUG] PCI(0, 0, 0)[b0] = 80a00000 [DEBUG] PCI(0, 0, 0)[b4] = 80800000 [DEBUG] Done memory map [DEBUG] Done io registers [DEBUG] t123: 1912, 6000, 7620 [NOTE ] ME: Wrong mode : 2 [NOTE ] ME: FWS2: 0x110a0140 [NOTE ] ME: Bist in progress: 0x0 [NOTE ] ME: ICC Status : 0x0 [NOTE ] ME: Invoke MEBx : 0x0 [NOTE ] ME: CPU replaced : 0x0 [NOTE ] ME: MBP ready : 0x0 [NOTE ] ME: MFS failure : 0x1 [NOTE ] ME: Warm reset req : 0x0 [NOTE ] ME: CPU repl valid : 0x1 [NOTE ] ME: (Reserved) : 0x0 [NOTE ] ME: FW update req : 0x0 [NOTE ] ME: (Reserved) : 0x0 [NOTE ] ME: Current state : 0xa [NOTE ] ME: Current PM event: 0x1 [NOTE ] ME: Progress code : 0x1 [NOTE ] PASSED! Tell ME that DRAM is ready [NOTE ] ME: ME is reporting as disabled, so not waiting for a response. [NOTE ] ME: FWS2: 0x110a0140 [NOTE ] ME: Bist in progress: 0x0 [NOTE ] ME: ICC Status : 0x0 [NOTE ] ME: Invoke MEBx : 0x0 [NOTE ] ME: CPU replaced : 0x0 [NOTE ] ME: MBP ready : 0x0 [NOTE ] ME: MFS failure : 0x1 [NOTE ] ME: Warm reset req : 0x0 [NOTE ] ME: CPU repl valid : 0x1 [NOTE ] ME: (Reserved) : 0x0 [NOTE ] ME: FW update req : 0x0 [NOTE ] ME: (Reserved) : 0x0 [NOTE ] ME: Current state : 0xa [NOTE ] ME: Current PM event: 0x1 [NOTE ] ME: Progress code : 0x1 [NOTE ] ME: Requested BIOS Action: No DID Ack received [DEBUG] ME: FW Partition Table : OK [DEBUG] ME: Bringup Loader Failure : NO [DEBUG] ME: Firmware Init Complete : NO [DEBUG] ME: Manufacturing Mode : YES [DEBUG] ME: Boot Options Present : NO [DEBUG] ME: Update In Progress : NO [DEBUG] ME: Current Working State : Initializing [DEBUG] ME: Current Operation State : Bring up [DEBUG] ME: Current Operation Mode : Debug or Disabled by AltDisableBit [DEBUG] ME: Error Code : No Error [DEBUG] ME: Progress Phase : BUP Phase [DEBUG] ME: Power Management Event : Moff->Mx wake after an error [DEBUG] ME: Progress Phase State : Check to see if straps say ME DISABLED [DEBUG] memcfg DDR3 ref clock 133 MHz [DEBUG] memcfg DDR3 clock 1330 MHz [DEBUG] memcfg channel assignment: A: 0, B 1, C 2 [DEBUG] memcfg channel[0] config (00620010): [DEBUG] ECC inactive [DEBUG] enhanced interleave mode on [DEBUG] rank interleave on [DEBUG] DIMMA 4096 MB width x8 dual rank, selected [DEBUG] DIMMB 0 MB width x8 single rank [DEBUG] memcfg channel[1] config (00620010): [DEBUG] ECC inactive [DEBUG] enhanced interleave mode on [DEBUG] rank interleave on [DEBUG] DIMMA 4096 MB width x8 dual rank, selected [DEBUG] DIMMB 0 MB width x8 single rank [DEBUG] CBMEM: [DEBUG] IMD: root @ 0x7ffff000 254 entries. [DEBUG] IMD: root @ 0x7fffec00 62 entries. [DEBUG] FMAP: area COREBOOT found @ 810200 (4128256 bytes) [DEBUG] External stage cache: [DEBUG] IMD: root @ 0x803ff000 254 entries. [DEBUG] IMD: root @ 0x803fec00 62 entries. [DEBUG] CBMEM entry for DIMM info: 0x7ffdb000 [DEBUG] SMM Memory Map [DEBUG] SMRAM : 0x80000000 0x800000 [DEBUG] Subregion 0: 0x80000000 0x300000 [DEBUG] Subregion 1: 0x80300000 0x100000 [DEBUG] Subregion 2: 0x80400000 0x400000 [DEBUG] Normal boot [INFO ] CBFS: Found 'fallback/postcar' @0x47700 size 0x4f14 in mcache @0xfeff1048 [DEBUG] Loading module at 0x7ffd0000 with entry 0x7ffd0031. filesize: 0x4b60 memsize: 0xae98 [DEBUG] Processing 221 relocs. Offset value of 0x7dfd0000 [DEBUG] BS: romstage times (exec / console): total (unknown) / 1 ms [NOTE ] coreboot-4.17-1192-g47fee08fc3 Sat Aug 27 02:44:46 UTC 2022 postcar starting (log level: 7)... [DEBUG] Normal boot [DEBUG] FMAP: area COREBOOT found @ 810200 (4128256 bytes) [INFO ] CBFS: Found 'fallback/ramstage' @0x19780 size 0x19063 in mcache @0x7ffdd0dc [DEBUG] Loading module at 0x7ff7c000 with entry 0x7ff7c000. filesize: 0x320f8 memsize: 0x52030 [DEBUG] Processing 3709 relocs. Offset value of 0x7bf7c000 [DEBUG] BS: postcar times (exec / console): total (unknown) / 0 ms [NOTE ] coreboot-4.17-1192-g47fee08fc3 Sat Aug 27 02:44:46 UTC 2022 ramstage starting (log level: 7)... [DEBUG] Normal boot [INFO ] Enumerating buses... [DEBUG] Root Device scanning... [DEBUG] CPU_CLUSTER: 0 enabled [DEBUG] DOMAIN: 0000 enabled [DEBUG] DOMAIN: 0000 scanning... [DEBUG] PCI: pci_scan_bus for bus 00 [DEBUG] PCI: 00:00.0 [8086/0154] enabled [DEBUG] PCI: 00:01.0 [8086/0151] disabled [DEBUG] PCI: 00:02.0 [8086/0166] enabled [DEBUG] PCI: 00:04.0 [8086/0153] enabled [DEBUG] PCI: 00:14.0 [8086/1e31] enabled [DEBUG] PCI: 00:16.0 [8086/1e3a] enabled [DEBUG] PCI: 00:16.1: Disabling device [DEBUG] PCI: 00:16.2: Disabling device [DEBUG] PCI: 00:16.3: Disabling device [DEBUG] PCI: 00:19.0 [8086/1502] enabled [DEBUG] PCI: 00:1a.0 [8086/1e2d] enabled [DEBUG] PCI: 00:1b.0 [8086/1e20] enabled [INFO ] PCH: PCIe Root Port coalescing is enabled [DEBUG] PCI: 00:1c.0 [8086/1e10] enabled [DEBUG] PCI: 00:1c.1 [8086/1e12] enabled [DEBUG] PCI: 00:1c.2 [8086/1e14] enabled [DEBUG] PCI: 00:1c.3: Disabling device [DEBUG] PCI: 00:1c.3 [8086/1e16] disabled [DEBUG] PCI: 00:1c.4: Disabling device [DEBUG] PCI: 00:1c.4: check set enabled [DEBUG] PCI: 00:1c.5: Disabling device [DEBUG] PCI: 00:1c.6: Disabling device [DEBUG] PCI: 00:1c.7: Disabling device [DEBUG] PCI: 00:1d.0 [8086/1e26] enabled [DEBUG] PCI: 00:1e.0: Disabling device [DEBUG] PCI: 00:1e.0 [8086/2448] disabled [DEBUG] PCI: 00:1f.0 [8086/1e55] enabled [DEBUG] PCI: 00:1f.2 [8086/1e01] enabled [DEBUG] PCI: 00:1f.3 [8086/1e22] enabled [DEBUG] PCI: 00:1f.5: Disabling device [DEBUG] PCI: 00:1f.5 [8086/1e09] disabled No operations [DEBUG] PCI: 00:1f.6 [8086/1e24] enabled [WARN ] PCI: Leftover static devices: [WARN ] PCI: 00:16.1 [WARN ] PCI: 00:16.2 [WARN ] PCI: 00:16.3 [WARN ] PCI: 00:1c.4 [WARN ] PCI: 00:1c.5 [WARN ] PCI: 00:1c.6 [WARN ] PCI: 00:1c.7 [WARN ] PCI: Check your devicetree.cb. [DEBUG] PCI: 00:1c.0 scanning... [DEBUG] PCI: pci_scan_bus for bus 01 [DEBUG] PCI: 01:00.0 [1180/e823] enabled [INFO ] Enabling Common Clock Configuration [INFO ] ASPM: Enabled L0s and L1 [INFO ] PCIe: Max_Payload_Size adjusted to 128 [DEBUG] PCI: 01:00.0: No LTR support [DEBUG] scan_bus: bus PCI: 00:1c.0 finished in 0 msecs [DEBUG] PCI: 00:1c.1 scanning... [DEBUG] PCI: pci_scan_bus for bus 02 [DEBUG] PCI: 02:00.0 [8086/2723] enabled [INFO ] Enabling Common Clock Configuration [INFO ] ASPM: Enabled L1 [INFO ] PCIe: Max_Payload_Size adjusted to 128 [DEBUG] scan_bus: bus PCI: 00:1c.1 finished in 0 msecs [DEBUG] PCI: 00:1c.2 scanning... [DEBUG] PCI: pci_scan_bus for bus 03 [DEBUG] scan_bus: bus PCI: 00:1c.2 finished in 0 msecs [DEBUG] PCI: 00:1f.0 scanning... [INFO ] PMH7: ID 05 Revision 12 [DEBUG] PNP: 00ff.1 enabled [DEBUG] PNP: 0c31.0 enabled [INFO ] H8: EC Firmware ID G2HT35WW-3.22, Version 4.01B [INFO ] H8: BDC detection not implemented. Assuming BDC installed [INFO ] H8: WWAN not installed [DEBUG] PNP: 00ff.2 enabled [DEBUG] scan_bus: bus PCI: 00:1f.0 finished in 3 msecs [DEBUG] PCI: 00:1f.3 scanning... [DEBUG] I2C: 01:54 enabled [DEBUG] bus: PCI: 00:1f.3[0]->I2C: 01:55 enabled [DEBUG] bus: PCI: 00:1f.3[0]->I2C: 01:56 enabled [DEBUG] bus: PCI: 00:1f.3[0]->I2C: 01:57 enabled [DEBUG] bus: PCI: 00:1f.3[0]->I2C: 01:5c enabled [DEBUG] bus: PCI: 00:1f.3[0]->I2C: 01:5d enabled [DEBUG] bus: PCI: 00:1f.3[0]->I2C: 01:5e enabled [DEBUG] bus: PCI: 00:1f.3[0]->I2C: 01:5f enabled [DEBUG] bus: PCI: 00:1f.3[0]->scan_bus: bus PCI: 00:1f.3 finished in 0 msecs [DEBUG] scan_bus: bus DOMAIN: 0000 finished in 3 msecs [DEBUG] scan_bus: bus Root Device finished in 3 msecs [INFO ] done [DEBUG] BS: BS_DEV_ENUMERATE run times (exec / console): 4 / 0 ms [DEBUG] FMAP: area RW_MRC_CACHE found @ 800000 (65536 bytes) [INFO ] MRC: No data in cbmem for 'RW_MRC_CACHE'. [DEBUG] found VGA at PCI: 00:02.0 [DEBUG] Setting up VGA for PCI: 00:02.0 [DEBUG] Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000 [DEBUG] Setting PCI_BRIDGE_CTL_VGA for bridge Root Device [INFO ] Allocating resources... [INFO ] Reading resources... [DEBUG] Adding PCIe enhanced config space BAR 0xf0000000-0xf4000000. [DEBUG] TOUUD 0x27d600000 TOLUD 0x82a00000 TOM 0x200000000 [DEBUG] MEBASE 0x7ffff00000 [DEBUG] IGD decoded, subtracting 32M UMA and 2M GTT [DEBUG] TSEG base 0x80000000 size 8M [INFO ] Available memory below 4GB: 2048M [INFO ] Available memory above 4GB: 6102M [ERROR] PNP: 00ff.1 missing read_resources [ERROR] PNP: 00ff.2 missing read_resources [INFO ] Done reading resources. [INFO ] === Resource allocator: DOMAIN: 0000 - Pass 1 (gathering requirements) === [DEBUG] PCI: 00:1c.0 io: size: 0 align: 12 gran: 12 limit: ffff [DEBUG] PCI: 00:1c.0 io: size: 0 align: 12 gran: 12 limit: ffff done [DEBUG] PCI: 00:1c.0 mem: size: 0 align: 20 gran: 20 limit: ffffffff [DEBUG] PCI: 01:00.0 10 * [0x0 - 0xff] mem [DEBUG] PCI: 00:1c.0 mem: size: 100000 align: 20 gran: 20 limit: ffffffff done [DEBUG] PCI: 00:1c.0 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff [DEBUG] PCI: 00:1c.0 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff done [DEBUG] PCI: 00:1c.1 io: size: 0 align: 12 gran: 12 limit: ffff [DEBUG] PCI: 00:1c.1 io: size: 0 align: 12 gran: 12 limit: ffff done [DEBUG] PCI: 00:1c.1 mem: size: 0 align: 20 gran: 20 limit: ffffffff [DEBUG] PCI: 02:00.0 10 * [0x0 - 0x3fff] mem [DEBUG] PCI: 00:1c.1 mem: size: 100000 align: 20 gran: 20 limit: ffffffff done [DEBUG] PCI: 00:1c.1 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff [DEBUG] PCI: 00:1c.1 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff done [DEBUG] PCI: 00:1c.2 io: size: 0 align: 12 gran: 12 limit: ffff [DEBUG] NONE 18 * [0x0 - 0x1fff] io [DEBUG] PCI: 00:1c.2 io: size: 2000 align: 12 gran: 12 limit: ffff done [DEBUG] PCI: 00:1c.2 mem: size: 0 align: 20 gran: 20 limit: ffffffff [DEBUG] NONE 10 * [0x0 - 0x7fffff] mem [DEBUG] PCI: 00:1c.2 mem: size: 800000 align: 20 gran: 20 limit: ffffffff done [DEBUG] PCI: 00:1c.2 prefmem: size: 0 align: 20 gran: 20 limit: ffffffffffffffff [DEBUG] NONE 14 * [0x0 - 0xfffffff] prefmem [DEBUG] PCI: 00:1c.2 prefmem: size: 10000000 align: 20 gran: 20 limit: ffffffffffffffff done [INFO ] === Resource allocator: DOMAIN: 0000 - Pass 2 (allocating resources) === [DEBUG] DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff [DEBUG] update_constraints: PCI: 00:1f.0 10000000 base 00000000 limit 00000fff io (fixed) [DEBUG] update_constraints: PCI: 00:1f.0 10000200 base 00001600 limit 0000167b io (fixed) [DEBUG] update_constraints: PCI: 00:1f.0 10000300 base 000015e0 limit 000015eb io (fixed) [DEBUG] update_constraints: PNP: 00ff.1 77 base 000015e0 limit 000015ef io (fixed) [DEBUG] update_constraints: PCI: 00:1f.3 20 base 00000400 limit 0000041f io (fixed) [INFO ] DOMAIN: 0000: Resource ranges: [INFO ] * Base: 1000, Size: 5e0, Tag: 100 [INFO ] * Base: 15f0, Size: 10, Tag: 100 [INFO ] * Base: 167c, Size: e984, Tag: 100 [DEBUG] PCI: 00:1c.2 1c * [0x2000 - 0x3fff] limit: 3fff io [DEBUG] PCI: 00:02.0 20 * [0x1000 - 0x103f] limit: 103f io [DEBUG] PCI: 00:19.0 18 * [0x1040 - 0x105f] limit: 105f io [DEBUG] PCI: 00:1f.2 20 * [0x1060 - 0x107f] limit: 107f io [DEBUG] PCI: 00:1f.2 10 * [0x1080 - 0x1087] limit: 1087 io [DEBUG] PCI: 00:1f.2 18 * [0x1088 - 0x108f] limit: 108f io [DEBUG] PCI: 00:1f.2 14 * [0x1090 - 0x1093] limit: 1093 io [DEBUG] PCI: 00:1f.2 1c * [0x1094 - 0x1097] limit: 1097 io [DEBUG] DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff done [DEBUG] DOMAIN: 0000 mem: base: 0 size: 0 align: 0 gran: 0 limit: fffffffff [DEBUG] update_constraints: PCI: 00:00.0 60 base f0000000 limit f3ffffff mem (fixed) [DEBUG] update_constraints: PCI: 00:00.0 03 base 00000000 limit 0009ffff mem (fixed) [DEBUG] update_constraints: PCI: 00:00.0 04 base 00100000 limit 7fffffff mem (fixed) [DEBUG] update_constraints: PCI: 00:00.0 05 base 100000000 limit 27d5fffff mem (fixed) [DEBUG] update_constraints: PCI: 00:00.0 06 base 80000000 limit 829fffff mem (fixed) [DEBUG] update_constraints: PCI: 00:00.0 07 base 000a0000 limit 000bffff mem (fixed) [DEBUG] update_constraints: PCI: 00:00.0 08 base 000c0000 limit 000fffff mem (fixed) [DEBUG] update_constraints: PCI: 00:00.0 09 base fed90000 limit fed90fff mem (fixed) [DEBUG] update_constraints: PCI: 00:00.0 0a base fed91000 limit fed91fff mem (fixed) [DEBUG] update_constraints: PCI: 00:1f.0 10000100 base ff000000 limit ffffffff mem (fixed) [DEBUG] update_constraints: PCI: 00:1f.0 03 base fec00000 limit fec00fff mem (fixed) [DEBUG] update_constraints: PNP: 0c31.0 00 base fed40000 limit fed44fff mem (fixed) [INFO ] DOMAIN: 0000: Resource ranges: [INFO ] * Base: 82a00000, Size: 6d600000, Tag: 200 [INFO ] * Base: f4000000, Size: ac00000, Tag: 200 [INFO ] * Base: fec01000, Size: 13f000, Tag: 200 [INFO ] * Base: fed45000, Size: 4b000, Tag: 200 [INFO ] * Base: fed92000, Size: 26e000, Tag: 200 [INFO ] * Base: 27d600000, Size: d82a00000, Tag: 100200 [DEBUG] PCI: 00:02.0 18 * [0x90000000 - 0x9fffffff] limit: 9fffffff prefmem [DEBUG] PCI: 00:02.0 10 * [0x82c00000 - 0x82ffffff] limit: 82ffffff mem [DEBUG] PCI: 00:1c.2 20 * [0x83000000 - 0x837fffff] limit: 837fffff mem [DEBUG] PCI: 00:1c.0 20 * [0x82a00000 - 0x82afffff] limit: 82afffff mem [DEBUG] PCI: 00:1c.1 20 * [0x82b00000 - 0x82bfffff] limit: 82bfffff mem [DEBUG] PCI: 00:19.0 10 * [0x83800000 - 0x8381ffff] limit: 8381ffff mem [DEBUG] PCI: 00:14.0 10 * [0x83820000 - 0x8382ffff] limit: 8382ffff mem [DEBUG] PCI: 00:04.0 10 * [0x83830000 - 0x83837fff] limit: 83837fff mem [DEBUG] PCI: 00:1b.0 10 * [0x83838000 - 0x8383bfff] limit: 8383bfff mem [DEBUG] PCI: 00:19.0 14 * [0x8383c000 - 0x8383cfff] limit: 8383cfff mem [DEBUG] PCI: 00:1f.6 10 * [0x8383d000 - 0x8383dfff] limit: 8383dfff mem [DEBUG] PCI: 00:1f.2 24 * [0x8383e000 - 0x8383e7ff] limit: 8383e7ff mem [DEBUG] PCI: 00:1a.0 10 * [0x8383f000 - 0x8383f3ff] limit: 8383f3ff mem [DEBUG] PCI: 00:1d.0 10 * [0x83840000 - 0x838403ff] limit: 838403ff mem [DEBUG] PCI: 00:1f.3 10 * [0x83841000 - 0x838410ff] limit: 838410ff mem [DEBUG] PCI: 00:16.0 10 * [0x83842000 - 0x8384200f] limit: 8384200f mem [DEBUG] PCI: 00:1c.2 24 * [0x27d600000 - 0x28d5fffff] limit: 28d5fffff prefmem [DEBUG] DOMAIN: 0000 mem: base: 0 size: 0 align: 0 gran: 0 limit: fffffffff done [DEBUG] PCI: 00:1c.0 mem: base: 82a00000 size: 100000 align: 20 gran: 20 limit: 82afffff [INFO ] PCI: 00:1c.0: Resource ranges: [INFO ] * Base: 82a00000, Size: 100000, Tag: 200 [DEBUG] PCI: 01:00.0 10 * [0x82a00000 - 0x82a000ff] limit: 82a000ff mem [DEBUG] PCI: 00:1c.0 mem: base: 82a00000 size: 100000 align: 20 gran: 20 limit: 82afffff done [DEBUG] PCI: 00:1c.1 mem: base: 82b00000 size: 100000 align: 20 gran: 20 limit: 82bfffff [INFO ] PCI: 00:1c.1: Resource ranges: [INFO ] * Base: 82b00000, Size: 100000, Tag: 200 [DEBUG] PCI: 02:00.0 10 * [0x82b00000 - 0x82b03fff] limit: 82b03fff mem [DEBUG] PCI: 00:1c.1 mem: base: 82b00000 size: 100000 align: 20 gran: 20 limit: 82bfffff done [DEBUG] PCI: 00:1c.2 io: base: 2000 size: 2000 align: 12 gran: 12 limit: 3fff [INFO ] PCI: 00:1c.2: Resource ranges: [INFO ] * Base: 2000, Size: 2000, Tag: 100 [DEBUG] NONE 18 * [0x2000 - 0x3fff] limit: 3fff io [DEBUG] PCI: 00:1c.2 io: base: 2000 size: 2000 align: 12 gran: 12 limit: 3fff done [DEBUG] PCI: 00:1c.2 prefmem: base: 27d600000 size: 10000000 align: 20 gran: 20 limit: 28d5fffff [INFO ] PCI: 00:1c.2: Resource ranges: [INFO ] * Base: 27d600000, Size: 10000000, Tag: 1200 [DEBUG] NONE 14 * [0x27d600000 - 0x28d5fffff] limit: 28d5fffff prefmem [DEBUG] PCI: 00:1c.2 prefmem: base: 27d600000 size: 10000000 align: 20 gran: 20 limit: 28d5fffff done [DEBUG] PCI: 00:1c.2 mem: base: 83000000 size: 800000 align: 20 gran: 20 limit: 837fffff [INFO ] PCI: 00:1c.2: Resource ranges: [INFO ] * Base: 83000000, Size: 800000, Tag: 200 [DEBUG] NONE 10 * [0x83000000 - 0x837fffff] limit: 837fffff mem [DEBUG] PCI: 00:1c.2 mem: base: 83000000 size: 800000 align: 20 gran: 20 limit: 837fffff done [INFO ] === Resource allocator: DOMAIN: 0000 - resource allocation complete === [DEBUG] PCI: 00:02.0 10 <- [0x0000000082c00000 - 0x0000000082ffffff] size 0x00400000 gran 0x16 mem64 [DEBUG] PCI: 00:02.0 18 <- [0x0000000090000000 - 0x000000009fffffff] size 0x10000000 gran 0x1c prefmem64 [DEBUG] PCI: 00:02.0 20 <- [0x0000000000001000 - 0x000000000000103f] size 0x00000040 gran 0x06 io [DEBUG] PCI: 00:04.0 10 <- [0x0000000083830000 - 0x0000000083837fff] size 0x00008000 gran 0x0f mem64 [DEBUG] PCI: 00:14.0 10 <- [0x0000000083820000 - 0x000000008382ffff] size 0x00010000 gran 0x10 mem64 [DEBUG] PCI: 00:16.0 10 <- [0x0000000083842000 - 0x000000008384200f] size 0x00000010 gran 0x04 mem64 [DEBUG] PCI: 00:19.0 10 <- [0x0000000083800000 - 0x000000008381ffff] size 0x00020000 gran 0x11 mem [DEBUG] PCI: 00:19.0 14 <- [0x000000008383c000 - 0x000000008383cfff] size 0x00001000 gran 0x0c mem [DEBUG] PCI: 00:19.0 18 <- [0x0000000000001040 - 0x000000000000105f] size 0x00000020 gran 0x05 io [DEBUG] PCI: 00:1a.0 10 <- [0x000000008383f000 - 0x000000008383f3ff] size 0x00000400 gran 0x0a mem [DEBUG] PCI: 00:1b.0 10 <- [0x0000000083838000 - 0x000000008383bfff] size 0x00004000 gran 0x0e mem64 [DEBUG] PCI: 00:1c.0 1c <- [0x000000000000ffff - 0x000000000000fffe] size 0x00000000 gran 0x0c bus 01 io [DEBUG] PCI: 00:1c.0 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 bus 01 prefmem [DEBUG] PCI: 00:1c.0 20 <- [0x0000000082a00000 - 0x0000000082afffff] size 0x00100000 gran 0x14 bus 01 mem [DEBUG] PCI: 01:00.0 10 <- [0x0000000082a00000 - 0x0000000082a000ff] size 0x00000100 gran 0x08 mem [DEBUG] PCI: 00:1c.1 1c <- [0x000000000000ffff - 0x000000000000fffe] size 0x00000000 gran 0x0c bus 02 io [DEBUG] PCI: 00:1c.1 24 <- [0xffffffffffffffff - 0xfffffffffffffffe] size 0x00000000 gran 0x14 bus 02 prefmem [DEBUG] PCI: 00:1c.1 20 <- [0x0000000082b00000 - 0x0000000082bfffff] size 0x00100000 gran 0x14 bus 02 mem [DEBUG] PCI: 02:00.0 10 <- [0x0000000082b00000 - 0x0000000082b03fff] size 0x00004000 gran 0x0e mem64 [DEBUG] PCI: 00:1c.2 1c <- [0x0000000000002000 - 0x0000000000003fff] size 0x00002000 gran 0x0c bus 03 io [DEBUG] PCI: 00:1c.2 24 <- [0x000000027d600000 - 0x000000028d5fffff] size 0x10000000 gran 0x14 bus 03 prefmem [DEBUG] PCI: 00:1c.2 20 <- [0x0000000083000000 - 0x00000000837fffff] size 0x00800000 gran 0x14 bus 03 mem [DEBUG] PCI: 00:1d.0 10 <- [0x0000000083840000 - 0x00000000838403ff] size 0x00000400 gran 0x0a mem [ERROR] PNP: 00ff.1 missing set_resources [ERROR] PNP: 00ff.2 missing set_resources [DEBUG] PCI: 00:1f.2 10 <- [0x0000000000001080 - 0x0000000000001087] size 0x00000008 gran 0x03 io [DEBUG] PCI: 00:1f.2 14 <- [0x0000000000001090 - 0x0000000000001093] size 0x00000004 gran 0x02 io [DEBUG] PCI: 00:1f.2 18 <- [0x0000000000001088 - 0x000000000000108f] size 0x00000008 gran 0x03 io [DEBUG] PCI: 00:1f.2 1c <- [0x0000000000001094 - 0x0000000000001097] size 0x00000004 gran 0x02 io [DEBUG] PCI: 00:1f.2 20 <- [0x0000000000001060 - 0x000000000000107f] size 0x00000020 gran 0x05 io [DEBUG] PCI: 00:1f.2 24 <- [0x000000008383e000 - 0x000000008383e7ff] size 0x00000800 gran 0x0b mem [DEBUG] PCI: 00:1f.3 10 <- [0x0000000083841000 - 0x00000000838410ff] size 0x00000100 gran 0x08 mem64 [DEBUG] PCI: 00:1f.6 10 <- [0x000000008383d000 - 0x000000008383dfff] size 0x00001000 gran 0x0c mem64 [INFO ] Done setting resources. [INFO ] Done allocating resources. [DEBUG] BS: BS_DEV_RESOURCES run times (exec / console): 2 / 0 ms [INFO ] Enabling resources... [DEBUG] PCI: 00:00.0 subsystem <- 8086/0154 [DEBUG] PCI: 00:00.0 cmd <- 06 [DEBUG] PCI: 00:02.0 subsystem <- 8086/0166 [DEBUG] PCI: 00:02.0 cmd <- 03 [DEBUG] PCI: 00:04.0 cmd <- 02 [DEBUG] PCI: 00:14.0 subsystem <- 8086/1e31 [DEBUG] PCI: 00:14.0 cmd <- 102 [DEBUG] PCI: 00:16.0 subsystem <- 8086/1e3a [DEBUG] PCI: 00:16.0 cmd <- 02 [DEBUG] PCI: 00:19.0 subsystem <- 17aa/21f3 [DEBUG] PCI: 00:19.0 cmd <- 103 [DEBUG] PCI: 00:1a.0 subsystem <- 8086/1e2d [DEBUG] PCI: 00:1a.0 cmd <- 102 [DEBUG] PCI: 00:1b.0 subsystem <- 8086/1e20 [DEBUG] PCI: 00:1b.0 cmd <- 102 [DEBUG] PCI: 00:1c.0 bridge ctrl <- 0013 [DEBUG] PCI: 00:1c.0 subsystem <- 8086/1e10 [DEBUG] PCI: 00:1c.0 cmd <- 106 [DEBUG] PCI: 00:1c.1 bridge ctrl <- 0013 [DEBUG] PCI: 00:1c.1 subsystem <- 8086/1e12 [DEBUG] PCI: 00:1c.1 cmd <- 106 [DEBUG] PCI: 00:1c.2 bridge ctrl <- 0013 [DEBUG] PCI: 00:1c.2 subsystem <- 8086/1e14 [DEBUG] PCI: 00:1c.2 cmd <- 107 [DEBUG] PCI: 00:1d.0 subsystem <- 8086/1e26 [DEBUG] PCI: 00:1d.0 cmd <- 102 [DEBUG] PCI: 00:1f.0 subsystem <- 8086/1e55 [DEBUG] PCI: 00:1f.0 cmd <- 107 [DEBUG] PCI: 00:1f.2 subsystem <- 8086/1e03 [DEBUG] PCI: 00:1f.2 cmd <- 03 [DEBUG] PCI: 00:1f.3 subsystem <- 8086/1e22 [DEBUG] PCI: 00:1f.3 cmd <- 103 [DEBUG] PCI: 00:1f.6 subsystem <- 8086/1e24 [DEBUG] PCI: 00:1f.6 cmd <- 02 [DEBUG] PCI: 01:00.0 subsystem <- 1180/e823 [DEBUG] PCI: 01:00.0 cmd <- 06 [DEBUG] PCI: 02:00.0 cmd <- 02 [INFO ] done. [INFO ] Found TPM ST33ZP24 by ST Microelectronics [DEBUG] TPM: Startup [DEBUG] TPM: command 0x99 returned 0x0 [DEBUG] TPM: Asserting physical presence [DEBUG] TPM: command 0x4000000a returned 0x0 [DEBUG] TPM: command 0x65 returned 0x0 [DEBUG] TPM: flags disable=0, deactivated=0, nvlocked=1 [INFO ] TPM: setup succeeded [DEBUG] BS: BS_DEV_INIT entry times (exec / console): 48 / 0 ms [INFO ] Initializing devices... [DEBUG] CPU_CLUSTER: 0 init [DEBUG] MTRR: Physical address space: [DEBUG] 0x0000000000000000 - 0x000000000009ffff size 0x000a0000 type 6 [DEBUG] 0x00000000000a0000 - 0x00000000000bffff size 0x00020000 type 0 [DEBUG] 0x00000000000c0000 - 0x000000007fffffff size 0x7ff40000 type 6 [DEBUG] 0x0000000080000000 - 0x000000008fffffff size 0x10000000 type 0 [DEBUG] 0x0000000090000000 - 0x000000009fffffff size 0x10000000 type 1 [DEBUG] 0x00000000a0000000 - 0x00000000ffffffff size 0x60000000 type 0 [DEBUG] 0x0000000100000000 - 0x000000027d5fffff size 0x17d600000 type 6 [DEBUG] 0x000000027d600000 - 0x000000028d5fffff size 0x10000000 type 0 [DEBUG] MTRR: Fixed MSR 0x250 0x0606060606060606 [DEBUG] MTRR: Fixed MSR 0x258 0x0606060606060606 [DEBUG] MTRR: Fixed MSR 0x259 0x0000000000000000 [DEBUG] MTRR: Fixed MSR 0x268 0x0606060606060606 [DEBUG] MTRR: Fixed MSR 0x269 0x0606060606060606 [DEBUG] MTRR: Fixed MSR 0x26a 0x0606060606060606 [DEBUG] MTRR: Fixed MSR 0x26b 0x0606060606060606 [DEBUG] MTRR: Fixed MSR 0x26c 0x0606060606060606 [DEBUG] MTRR: Fixed MSR 0x26d 0x0606060606060606 [DEBUG] MTRR: Fixed MSR 0x26e 0x0606060606060606 [DEBUG] MTRR: Fixed MSR 0x26f 0x0606060606060606 [DEBUG] CPU physical address size: 36 bits [DEBUG] MTRR: default type WB/UC MTRR counts: 12/7. [DEBUG] MTRR: UC selected as default type. [DEBUG] MTRR: 0 base 0x0000000000000000 mask 0x0000000f80000000 type 6 [DEBUG] MTRR: 1 base 0x0000000090000000 mask 0x0000000ff0000000 type 1 [DEBUG] MTRR: 2 base 0x0000000100000000 mask 0x0000000f00000000 type 6 [DEBUG] MTRR: 3 base 0x0000000200000000 mask 0x0000000f80000000 type 6 [DEBUG] MTRR: 4 base 0x000000027d600000 mask 0x0000000fffe00000 type 0 [DEBUG] MTRR: 5 base 0x000000027d800000 mask 0x0000000fff800000 type 0 [DEBUG] MTRR: 6 base 0x000000027e000000 mask 0x0000000ffe000000 type 0 [DEBUG] MTRR check [DEBUG] Fixed MTRRs : Enabled [DEBUG] Variable MTRRs: Enabled [DEBUG] CPU has 2 cores, 4 threads enabled. [DEBUG] Setting up SMI for CPU [INFO ] Will perform SMM setup. [DEBUG] FMAP: area COREBOOT found @ 810200 (4128256 bytes) [INFO ] CBFS: Found 'cpu_microcode_blob.bin' @0x12f40 size 0x6800 in mcache @0x7ffdd0ac [DEBUG] microcode: sig=0x306a9 pf=0x10 revision=0x21 [INFO ] CPU: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz. [INFO ] LAPIC 0x0 in XAPIC mode. [DEBUG] Loading module at 0x00030000 with entry 0x00030000. filesize: 0x178 memsize: 0x178 [DEBUG] Processing 18 relocs. Offset value of 0x00030000 [DEBUG] Attempting to start 3 APs [DEBUG] Waiting for 10ms after sending INIT. [DEBUG] Waiting for SIPI to complete... [DEBUG] done. [DEBUG] Waiting for SIPI to complete... [INFO ] LAPIC 0x1 in XAPIC mode. [DEBUG] done. [INFO ] AP: slot 1 apic_id 1, MCU rev: 0x00000021 [INFO ] LAPIC 0x3 in XAPIC mode. [INFO ] LAPIC 0x2 in XAPIC mode. [INFO ] AP: slot 2 apic_id 3, MCU rev: 0x00000021 [INFO ] AP: slot 3 apic_id 2, MCU rev: 0x00000021 [DEBUG] Loading module at 0x00038000 with entry 0x00038000. filesize: 0x1e8 memsize: 0x1e8 [DEBUG] Processing 11 relocs. Offset value of 0x00038000 [DEBUG] smm_module_setup_stub: stack_top = 0x80001000 [DEBUG] smm_module_setup_stub: per cpu stack_size = 0x400 [DEBUG] smm_module_setup_stub: runtime.start32_offset = 0x4c [DEBUG] smm_module_setup_stub: runtime.smm_size = 0x10000 [DEBUG] SMM Module: stub loaded at 38000. Will call 0x7ff94225 [DEBUG] Installing permanent SMM handler to 0x80000000 [DEBUG] FX_SAVE [0x802ff800-0x80300000] [DEBUG] HANDLER [0x802fe000-0x802ff568] [DEBUG] CPU 0 [DEBUG] ss0 [0x802fdc00-0x802fe000] [DEBUG] stub0 [0x802f6000-0x802f61e8] [DEBUG] CPU 1 [DEBUG] ss1 [0x802fd800-0x802fdc00] [DEBUG] stub1 [0x802f5c00-0x802f5de8] [DEBUG] CPU 2 [DEBUG] ss2 [0x802fd400-0x802fd800] [DEBUG] stub2 [0x802f5800-0x802f59e8] [DEBUG] CPU 3 [DEBUG] ss3 [0x802fd000-0x802fd400] [DEBUG] stub3 [0x802f5400-0x802f55e8] [DEBUG] stacks [0x80000000-0x80001000] [DEBUG] Loading module at 0x802fe000 with entry 0x802fe34c. filesize: 0x1550 memsize: 0x1568 [DEBUG] Processing 68 relocs. Offset value of 0x802fe000 [DEBUG] Loading module at 0x802f6000 with entry 0x802f6000. filesize: 0x1e8 memsize: 0x1e8 [DEBUG] Processing 11 relocs. Offset value of 0x802f6000 [DEBUG] smm_module_setup_stub: stack_top = 0x80001000 [DEBUG] smm_module_setup_stub: per cpu stack_size = 0x400 [DEBUG] smm_module_setup_stub: runtime.start32_offset = 0x4c [DEBUG] smm_module_setup_stub: runtime.smm_size = 0x300000 [DEBUG] SMM Module: placing smm entry code at 802f5c00, cpu # 0x1 [DEBUG] SMM Module: placing smm entry code at 802f5800, cpu # 0x2 [DEBUG] SMM Module: placing smm entry code at 802f5400, cpu # 0x3 [DEBUG] SMM Module: stub loaded at 802f6000. Will call 0x802fe34c [DEBUG] Initializing southbridge SMI... [INFO ] smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802ee000, cpu = 0 [DEBUG] In relocation handler: cpu 0 [DEBUG] New SMBASE=0x802ee000 IEDBASE=0x80400000 [DEBUG] Writing SMRR. base = 0x80000006, mask=0xff800800 [DEBUG] Relocation complete. [INFO ] microcode: Update skipped, already up-to-date [INFO ] smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802edc00, cpu = 1 [DEBUG] In relocation handler: cpu 1 [DEBUG] New SMBASE=0x802edc00 IEDBASE=0x80400000 [DEBUG] Writing SMRR. base = 0x80000006, mask=0xff800800 [DEBUG] Relocation complete. [INFO ] microcode: Update skipped, already up-to-date [INFO ] smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802ed800, cpu = 2 [DEBUG] In relocation handler: cpu 2 [DEBUG] New SMBASE=0x802ed800 IEDBASE=0x80400000 [DEBUG] Writing SMRR. base = 0x80000006, mask=0xff800800 [DEBUG] Relocation complete. [INFO ] microcode: Update skipped, already up-to-date [INFO ] smm_do_relocation : curr_smbase 0x30000 perm_smbase 0x802ed400, cpu = 3 [DEBUG] In relocation handler: cpu 3 [DEBUG] New SMBASE=0x802ed400 IEDBASE=0x80400000 [DEBUG] Writing SMRR. base = 0x80000006, mask=0xff800800 [DEBUG] Relocation complete. [INFO ] microcode: Update skipped, already up-to-date [INFO ] Initializing CPU #0 [DEBUG] CPU: vendor Intel device 306a9 [DEBUG] CPU: family 06, model 3a, stepping 09 [INFO ] CPU: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz. [INFO ] CPU: platform id 4 [INFO ] CPU: cpuid(1) 0x306a9 [INFO ] CPU: AES supported [INFO ] CPU: TXT supported [INFO ] CPU: VT supported [DEBUG] VMX status: enabled [DEBUG] IA32_FEATURE_CONTROL status: locked [DEBUG] cpu: energy policy set to 6 [DEBUG] model_x06ax: frequency set to 2600 [INFO ] Turbo is available but hidden [INFO ] Turbo is available and visible [INFO ] CPU #0 initialized [INFO ] Initializing CPU #1 [INFO ] Initializing CPU #2 [INFO ] Initializing CPU #3 [DEBUG] CPU: vendor Intel device 306a9 [DEBUG] CPU: family 06, model 3a, stepping 09 [DEBUG] CPU: vendor Intel device 306a9 [DEBUG] CPU: family 06, model 3a, stepping 09 [DEBUG] CPU: vendor Intel device 306a9 [DEBUG] CPU: family 06, model 3a, stepping 09 [INFO ] CPU: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz. [INFO ] CPU: platform id 4 [INFO ] CPU: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz. [INFO ] CPU: cpuid(1) 0x306a9 [INFO ] CPU: platform id 4 [INFO ] CPU: AES supported [INFO ] CPU: TXT supported [INFO ] CPU: VT supported [INFO ] CPU: cpuid(1) 0x306a9 [DEBUG] VMX status: enabled [INFO ] CPU: AES supported [INFO ] CPU: TXT supported [INFO ] CPU: VT supported [DEBUG] IA32_FEATURE_CONTROL status: locked [DEBUG] VMX status: enabled [INFO ] CPU: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz. [DEBUG] IA32_FEATURE_CONTROL status: locked [INFO ] CPU: platform id 4 [INFO ] CPU: cpuid(1) 0x306a9 [INFO ] CPU: AES supported [INFO ] CPU: TXT supported [INFO ] CPU: VT supported [DEBUG] VMX status: enabled [DEBUG] IA32_FEATURE_CONTROL status: locked [DEBUG] cpu: energy policy set to 6 [DEBUG] model_x06ax: frequency set to 2600 [DEBUG] cpu: energy policy set to 6 [INFO ] CPU #2 initialized [DEBUG] model_x06ax: frequency set to 2600 [INFO ] CPU #3 initialized [DEBUG] cpu: energy policy set to 6 [DEBUG] model_x06ax: frequency set to 2600 [INFO ] CPU #1 initialized [INFO ] bsp_do_flight_plan done after 9 msecs. [DEBUG] Initializing southbridge SMI... [DEBUG] SMI_STS: [DEBUG] GPE0_STS: GPIO15 GPIO14 GPIO11 GPIO9 GPIO7 GPIO5 GPIO4 GPIO3 GPIO0 [DEBUG] ALT_GP_SMI_STS: GPI14 GPI13 GPI11 GPI10 GPI9 GPI7 GPI6 GPI5 GPI4 GPI3 GPI1 GPI0 [DEBUG] TCO_STS: [DEBUG] Locking SMM. [DEBUG] CPU_CLUSTER: 0 init finished in 22 msecs [DEBUG] PCI: 00:00.0 init [DEBUG] Disabling PEG12. [DEBUG] Disabling PEG11. [DEBUG] Disabling PEG10. [DEBUG] Disabling PEG60. [DEBUG] Disabling Device 7. [DEBUG] Disabling PEG IO clock. [DEBUG] Set BIOS_RESET_CPL [DEBUG] CPU TDP: 35 Watts [DEBUG] PCI: 00:00.0 init finished in 1 msecs [DEBUG] PCI: 00:02.0 init [INFO ] CBFS: Found 'vbt.bin' @0x36880 size 0x599 in mcache @0x7ffdd1c4 [INFO ] Found a VBT of 4281 bytes after decompression [INFO ] GMA: Found VBT in CBFS [INFO ] GMA: Found valid VBT in CBFS [DEBUG] GT Power Management Init [DEBUG] IVB GT2 25W-35W Power Meter Weights [INFO ] CBFS: Found 'pci8086,0166.rom' @0x376c0 size 0x10000 in mcache @0x7ffdd21c [DEBUG] In CBFS, ROM address for PCI: 00:02.0 = 0xffc478ec [DEBUG] Copying VGA ROM Image from 0xffc478ec to 0xc0000, 0x10000 bytes [ERROR] Null dereference at eip: 0x7ff8c769 [ERROR] Null dereference at eip: 0x7ff8c783 [DEBUG] Calling Option ROM... [DEBUG] intel_vga_int15_handler: AX=5fac BX=0190 CX=0000 DX=00c0 [DEBUG] Unknown INT15 function 5fac! [DEBUG] int15 call returned error. [DEBUG] intel_vga_int15_handler: AX=5f40 BX=0000 CX=0004 DX=0001 [DEBUG] DISPLAY=0 [DEBUG] intel_vga_int15_handler: AX=5f35 BX=c000 CX=0002 DX=03da [DEBUG] ... Option ROM returned. [DEBUG] VGA Option ROM was run [DEBUG] GT Power Management Init (post VBIOS) [DEBUG] PCI: 00:02.0 init finished in 441 msecs [DEBUG] PCI: 00:04.0 init [DEBUG] PCI: 00:04.0 init finished in 0 msecs [DEBUG] PCI: 00:14.0 init [DEBUG] XHCI: Setting up controller.. done. [DEBUG] PCI: 00:14.0 init finished in 0 msecs [DEBUG] PCI: 00:16.0 init [DEBUG] ME: FW Partition Table : OK [DEBUG] ME: Bringup Loader Failure : NO [DEBUG] ME: Firmware Init Complete : NO [DEBUG] ME: Manufacturing Mode : YES [DEBUG] ME: Boot Options Present : NO [DEBUG] ME: Update In Progress : NO [DEBUG] ME: Current Working State : Initializing [DEBUG] ME: Current Operation State : Bring up [DEBUG] ME: Current Operation Mode : Debug or Disabled by AltDisableBit [DEBUG] ME: Error Code : No Error [DEBUG] ME: Progress Phase : BUP Phase [DEBUG] ME: Power Management Event : Moff->Mx wake after an error [DEBUG] ME: Progress Phase State : Check to see if straps say ME DISABLED [CRIT ] intel_me_path: mbp is not ready! [NOTE ] ME: BIOS path: Error [DEBUG] ME: me_state=0, me_state_prev=0 [DEBUG] PCI: 00:16.0 init finished in 0 msecs [DEBUG] PCI: 00:19.0 init [DEBUG] PCI: 00:19.0 init finished in 0 msecs [DEBUG] PCI: 00:1a.0 init [DEBUG] EHCI: Setting up controller.. done. [DEBUG] PCI: 00:1a.0 init finished in 0 msecs [DEBUG] PCI: 00:1b.0 init [DEBUG] Azalia: base = 0x83838000 [DEBUG] Azalia: codec_mask = 09 [DEBUG] azalia_audio: Initializing codec #3 [DEBUG] azalia_audio: codec viddid: 80862806 [DEBUG] azalia_audio: verb_size: 16 [DEBUG] azalia_audio: verb loaded. [DEBUG] azalia_audio: Initializing codec #0 [DEBUG] azalia_audio: codec viddid: 10ec0269 [DEBUG] azalia_audio: verb_size: 76 [DEBUG] azalia_audio: verb loaded. [DEBUG] PCI: 00:1b.0 init finished in 5 msecs [DEBUG] PCI: 00:1c.0 init [DEBUG] Initializing PCH PCIe bridge. [DEBUG] PCI: 00:1c.0 init finished in 0 msecs [DEBUG] PCI: 00:1c.1 init [DEBUG] Initializing PCH PCIe bridge. [DEBUG] PCI: 00:1c.1 init finished in 0 msecs [DEBUG] PCI: 00:1c.2 init [DEBUG] Initializing PCH PCIe bridge. [DEBUG] PCI: 00:1c.2 init finished in 0 msecs [DEBUG] PCI: 00:1d.0 init [DEBUG] EHCI: Setting up controller.. done. [DEBUG] PCI: 00:1d.0 init finished in 0 msecs [DEBUG] PCI: 00:1f.0 init [DEBUG] pch: lpc_init [INFO ] PCH: detected QM77, device id: 0x1e55, rev id 0x4 [DEBUG] IOAPIC: Initializing IOAPIC at 0xfec00000 [DEBUG] IOAPIC: ID = 0x02 [DEBUG] IOAPIC: 24 interrupts [DEBUG] IOAPIC: Clearing IOAPIC at 0xfec00000 [DEBUG] IOAPIC: Bootstrap Processor Local APIC = 0x00 [INFO ] Set power off after power failure. [INFO ] NMI sources disabled. [DEBUG] PantherPoint PM init [DEBUG] RTC: failed = 0x0 [DEBUG] RTC Init [DEBUG] apm_control: Disabling ACPI. [DEBUG] APMC done. [DEBUG] pch_spi_init [DEBUG] PCI: 00:1f.0 init finished in 0 msecs [DEBUG] PCI: 00:1f.2 init [DEBUG] SATA: Initializing... [DEBUG] SATA: Controller in AHCI mode. [DEBUG] ABAR: 0x8383e000 [DEBUG] PCI: 00:1f.2 init finished in 0 msecs [DEBUG] PCI: 00:1f.3 init [DEBUG] PCI: 00:1f.3 init finished in 0 msecs [DEBUG] PCI: 00:1f.6 init [DEBUG] PCI: 00:1f.6 init finished in 0 msecs [DEBUG] PCI: 01:00.0 init [DEBUG] PCI: 01:00.0 init finished in 0 msecs [DEBUG] PCI: 02:00.0 init [DEBUG] PCI: 02:00.0 init finished in 0 msecs [DEBUG] PNP: 00ff.2 init [DEBUG] Keyboard init... [INFO ] Keyboard controller output buffer result timeout [INFO ] Keyboard controller output buffer result timeout [INFO ] Keyboard controller output buffer result timeout [INFO ] Keyboard controller output buffer result timeout [ERROR] Keyboard reset failed ACK: 0xaa [DEBUG] PNP: 00ff.2 init finished in 1830 msecs [DEBUG] smbus: PCI: 00:1f.3[0]->I2C: 01:54 init [DEBUG] I2C: 01:54 init finished in 0 msecs [DEBUG] smbus: PCI: 00:1f.3[0]->I2C: 01:55 init [DEBUG] I2C: 01:55 init finished in 0 msecs [DEBUG] smbus: PCI: 00:1f.3[0]->I2C: 01:56 init [DEBUG] I2C: 01:56 init finished in 0 msecs [DEBUG] smbus: PCI: 00:1f.3[0]->I2C: 01:57 init [DEBUG] I2C: 01:57 init finished in 0 msecs [DEBUG] smbus: PCI: 00:1f.3[0]->I2C: 01:5c init [DEBUG] Locking EEPROM RFID [DEBUG] init EEPROM done [DEBUG] I2C: 01:5c init finished in 23 msecs [DEBUG] smbus: PCI: 00:1f.3[0]->I2C: 01:5d init [DEBUG] I2C: 01:5d init finished in 0 msecs [DEBUG] smbus: PCI: 00:1f.3[0]->I2C: 01:5e init [DEBUG] I2C: 01:5e init finished in 0 msecs [DEBUG] smbus: PCI: 00:1f.3[0]->I2C: 01:5f init [DEBUG] I2C: 01:5f init finished in 0 msecs [INFO ] Devices initialized [DEBUG] BS: BS_DEV_INIT run times (exec / console): 2324 / 1 ms [INFO ] Finalize devices... [DEBUG] PCI: 00:1f.0 final [DEBUG] flash size 0xc00000 bytes [INFO ] SF: Detected 00 0000 with sector size 0x1000, total 0xc00000 [DEBUG] apm_control: Finalizing SMM. [DEBUG] APMC done. [INFO ] Devices finalized [INFO ] CBFS: Found 'fallback/dsdt.aml' @0x32f40 size 0x390a in mcache @0x7ffdd198 [WARN ] CBFS: 'fallback/slic' not found. [INFO ] ACPI: Writing ACPI tables at 7ff3b000. [DEBUG] ACPI: * FACS [DEBUG] ACPI: * DSDT [DEBUG] ACPI: * FADT [DEBUG] ACPI: added table 1/32, length now 40 [DEBUG] ACPI: * SSDT [DEBUG] Found 1 CPU(s) with 4 core(s) each. [DEBUG] PSS: 2601MHz power 35000 control 0x2100 status 0x2100 [DEBUG] PSS: 2600MHz power 35000 control 0x1a00 status 0x1a00 [DEBUG] PSS: 2400MHz power 31561 control 0x1800 status 0x1800 [DEBUG] PSS: 2200MHz power 28247 control 0x1600 status 0x1600 [DEBUG] PSS: 2000MHz power 25084 control 0x1400 status 0x1400 [DEBUG] PSS: 1800MHz power 22064 control 0x1200 status 0x1200 [DEBUG] PSS: 1600MHz power 19135 control 0x1000 status 0x1000 [DEBUG] PSS: 1400MHz power 16344 control 0xe00 status 0xe00 [DEBUG] PSS: 1200MHz power 13666 control 0xc00 status 0xc00 [DEBUG] PSS: 2601MHz power 35000 control 0x2100 status 0x2100 [DEBUG] PSS: 2600MHz power 35000 control 0x1a00 status 0x1a00 [DEBUG] PSS: 2400MHz power 31561 control 0x1800 status 0x1800 [DEBUG] PSS: 2200MHz power 28247 control 0x1600 status 0x1600 [DEBUG] PSS: 2000MHz power 25084 control 0x1400 status 0x1400 [DEBUG] PSS: 1800MHz power 22064 control 0x1200 status 0x1200 [DEBUG] PSS: 1600MHz power 19135 control 0x1000 status 0x1000 [DEBUG] PSS: 1400MHz power 16344 control 0xe00 status 0xe00 [DEBUG] PSS: 1200MHz power 13666 control 0xc00 status 0xc00 [DEBUG] PSS: 2601MHz power 35000 control 0x2100 status 0x2100 [DEBUG] PSS: 2600MHz power 35000 control 0x1a00 status 0x1a00 [DEBUG] PSS: 2400MHz power 31561 control 0x1800 status 0x1800 [DEBUG] PSS: 2200MHz power 28247 control 0x1600 status 0x1600 [DEBUG] PSS: 2000MHz power 25084 control 0x1400 status 0x1400 [DEBUG] PSS: 1800MHz power 22064 control 0x1200 status 0x1200 [DEBUG] PSS: 1600MHz power 19135 control 0x1000 status 0x1000 [DEBUG] PSS: 1400MHz power 16344 control 0xe00 status 0xe00 [DEBUG] PSS: 1200MHz power 13666 control 0xc00 status 0xc00 [DEBUG] PSS: 2601MHz power 35000 control 0x2100 status 0x2100 [DEBUG] PSS: 2600MHz power 35000 control 0x1a00 status 0x1a00 [DEBUG] PSS: 2400MHz power 31561 control 0x1800 status 0x1800 [DEBUG] PSS: 2200MHz power 28247 control 0x1600 status 0x1600 [DEBUG] PSS: 2000MHz power 25084 control 0x1400 status 0x1400 [DEBUG] PSS: 1800MHz power 22064 control 0x1200 status 0x1200 [DEBUG] PSS: 1600MHz power 19135 control 0x1000 status 0x1000 [DEBUG] PSS: 1400MHz power 16344 control 0xe00 status 0xe00 [DEBUG] PSS: 1200MHz power 13666 control 0xc00 status 0xc00 [DEBUG] PCI space above 4GB MMIO is at 0x27d600000, len = 0xd82a00000 [DEBUG] Generating ACPI PIRQ entries [INFO ] \_SB_.PCI0.TPM: LPC TPM PNP: 0c31.0 [INFO ] ACPI: * H8 [INFO ] H8: BDC detection not implemented. Assuming BDC installed [INFO ] H8: WWAN not installed [INFO ] \_SB.PCI0.RP02.WF00: PCI: 02:00.0 [DEBUG] ACPI: added table 2/32, length now 44 [DEBUG] ACPI: * MCFG [DEBUG] ACPI: added table 3/32, length now 48 [DEBUG] ACPI: * TCPA [DEBUG] TCPA log created at 0x7ff2b000 [DEBUG] ACPI: added table 4/32, length now 52 [DEBUG] ACPI: * MADT [DEBUG] ACPI: added table 5/32, length now 56 [DEBUG] current = 7ff40790 [DEBUG] ACPI: * DMAR [DEBUG] ACPI: added table 6/32, length now 60 [DEBUG] current = 7ff40850 [DEBUG] ACPI: * HPET [DEBUG] ACPI: added table 7/32, length now 64 [INFO ] ACPI: done. [DEBUG] ACPI tables: 22672 bytes. [DEBUG] smbios_write_tables: 7ff23000 [INFO ] Create SMBIOS type 16 [INFO ] Create SMBIOS type 17 [INFO ] Create SMBIOS type 20 [INFO ] PCI: 02:00.0 (unknown) [DEBUG] SMBIOS tables: 1134 bytes. [DEBUG] Writing table forward entry at 0x00000500 [DEBUG] Wrote coreboot table at: 0x00000500, 0x10 bytes, checksum 8fe8 [DEBUG] Writing coreboot table at 0x7ff5f000 [DEBUG] 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES [DEBUG] 1. 0000000000001000-000000000009ffff: RAM [DEBUG] 2. 00000000000a0000-00000000000fffff: RESERVED [DEBUG] 3. 0000000000100000-000000007ff22fff: RAM [DEBUG] 4. 000000007ff23000-000000007ff7bfff: CONFIGURATION TABLES [DEBUG] 5. 000000007ff7c000-000000007ffcefff: RAMSTAGE [DEBUG] 6. 000000007ffcf000-000000007fffffff: CONFIGURATION TABLES [DEBUG] 7. 0000000080000000-00000000829fffff: RESERVED [DEBUG] 8. 00000000f0000000-00000000f3ffffff: RESERVED [DEBUG] 9. 00000000fed40000-00000000fed44fff: RESERVED [DEBUG] 10. 00000000fed90000-00000000fed91fff: RESERVED [DEBUG] 11. 0000000100000000-000000027d5fffff: RAM [DEBUG] Wrote coreboot table at: 0x7ff5f000, 0x3b8 bytes, checksum f84d [DEBUG] coreboot table: 976 bytes. [DEBUG] IMD ROOT 0. 0x7ffff000 0x00001000 [DEBUG] IMD SMALL 1. 0x7fffe000 0x00001000 [DEBUG] CONSOLE 2. 0x7ffde000 0x00020000 [DEBUG] RO MCACHE 3. 0x7ffdd000 0x000003d0 [DEBUG] TIME STAMP 4. 0x7ffdc000 0x00000910 [DEBUG] MEM INFO 5. 0x7ffdb000 0x00000768 [DEBUG] AFTER CAR 6. 0x7ffcf000 0x0000c000 [DEBUG] RAMSTAGE 7. 0x7ff7b000 0x00054000 [DEBUG] SMM BACKUP 8. 0x7ff6b000 0x00010000 [DEBUG] IGD OPREGION 9. 0x7ff67000 0x000030b8 [DEBUG] COREBOOT 10. 0x7ff5f000 0x00008000 [DEBUG] ACPI 11. 0x7ff3b000 0x00024000 [DEBUG] TCPA TCGLOG12. 0x7ff2b000 0x00010000 [DEBUG] SMBIOS 13. 0x7ff23000 0x00008000 [DEBUG] IMD small region: [DEBUG] IMD ROOT 0. 0x7fffec00 0x00000400 [DEBUG] FMAP 1. 0x7fffeb20 0x000000e0 [DEBUG] ROMSTAGE 2. 0x7fffeb00 0x00000004 [DEBUG] ROMSTG STCK 3. 0x7fffea40 0x000000a8 [DEBUG] ACPI GNVS 4. 0x7fffe940 0x00000100 [DEBUG] BS: BS_WRITE_TABLES run times (exec / console): 25 / 0 ms [INFO ] CBFS: Found 'fallback/payload' @0x63600 size 0x1187b in mcache @0x7ffdd2dc [DEBUG] Checking segment from ROM address 0xffc7382c [DEBUG] Payload being loaded at below 1MiB without region being marked as RAM usable. [DEBUG] Checking segment from ROM address 0xffc73848 [DEBUG] Loading segment from ROM address 0xffc7382c [DEBUG] code (compression=1) [DEBUG] New segment dstaddr 0x000dede0 memsize 0x21220 srcaddr 0xffc73864 filesize 0x11843 [DEBUG] Loading Segment: addr: 0x000dede0 memsz: 0x0000000000021220 filesz: 0x0000000000011843 [DEBUG] using LZMA [DEBUG] Loading segment from ROM address 0xffc73848 [DEBUG] Entry Point 0x000fd25b [DEBUG] BS: BS_PAYLOAD_LOAD run times (exec / console): 26 / 0 ms [DEBUG] ICH-NM10-PCH: watchdog disabled [DEBUG] Jumping to boot code at 0x000fd25b(0x7ff5f000) SeaBIOS (version rel-1.16.0-0-gd239552) BUILD: gcc: (coreboot toolchain v2022-08-22_88ffed3df8) 11.2.0 binutils: (GNU Binutils) 2.37 Found coreboot cbmem console @ 7ffde000 Found mainboard LENOVO ThinkPad X230 Relocating init from 0x000e0540 to 0x7fed5ac0 (size 54432) Found CBFS header at 0xffc1022c multiboot: eax=7ffad598, ebx=7ffad564 Found 18 PCI devices (max PCI bus is 03) Copying SMBIOS from 0x7ff23000 to 0x000f67c0 Copying SMBIOS 3.0 from 0x7ff23020 to 0x000f67a0 Copying ACPI RSDP from 0x7ff3b000 to 0x000f6770 table(50434146)=0x7ff3eba0 (via xsdt) Using pmtimer, ioport 0x508 table(41504354)=0x7ff406e0 (via xsdt) Scan for VGA option rom Running option rom at c000:0003 Turning on vga text mode console SeaBIOS (version rel-1.16.0-0-gd239552) Machine UUID ddf76e01-5251-11cb-b3cf-aaae51e6a824 PCI: XHCI at 00:14.0 (mmio 0x83820000) XHCI init: regs @ 0x83820000, 8 ports, 32 slots, 32 byte contexts XHCI protocol USB 2.00, 4 ports (offset 1), def 3001 XHCI protocol USB 3.00, 4 ports (offset 5), def 1000 XHCI extcap 0xc1 @ 0x83828040 XHCI extcap 0xc0 @ 0x83828070 XHCI extcap 0x1 @ 0x83828330 EHCI init on dev 00:1a.0 (regs=0x8383f020) EHCI init on dev 00:1d.0 (regs=0x83840020) AHCI controller at 00:1f.2, iobase 0x8383e000, irq 11 Searching bootorder for: /pci@i0cf8/pci-bridge@1c/*@0 Discarding ps2 data 0f (status=11) Searching bootorder for: HALT Found 0 lpt ports Found 0 serial ports Searching bootorder for: /rom@img/nvramcui Searching bootorder for: /rom@img/coreinfo Searching bootorder for: /pci@i0cf8/*@1f,2/drive@2/disk@0 AHCI/2: Set transfer mode to UDMA-6 Searching bios-geometry for: /pci@i0cf8/*@1f,2/drive@2/disk@0 AHCI/2: registering: "AHCI/2: INTEL SSDMAEMC080G2L ATA-7 Hard-Disk (74 GiBytes)" Searching bootorder for: /pci@i0cf8/*@1f,2/drive@0/disk@0 AHCI/0: Set transfer mode to UDMA-6 Searching bios-geometry for: /pci@i0cf8/*@1f,2/drive@0/disk@0 AHCI/0: registering: "AHCI/0: TEAM T253X1480G ATA-9 Hard-Disk (447 GiBytes)" XHCI no devices found Initialized USB HUB (0 ports used) PS2 keyboard initialized WARNING - Timeout at ehci_wait_td:517! ehci pipe=0x7fecf500 cur=7fec8dc0 tok=80080d80 next=7fec8e00 td=0x7fec8dc0 status=80080d80 Initialized USB HUB (0 ports used) All threads complete. Scan for option roms Press ESC for boot menu. Searching bootorder for: HALT drive 0x000f66b0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=937703088 drive 0x000f6700: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=156301488 Space available for UMB: d0000-ec800, f5fe0-f66b0 Returned 180224 bytes of ZoneHigh e820 map has 9 items: 0: 0000000000000000 - 000000000009fc00 = 1 RAM 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED 3: 0000000000100000 - 000000007ff0f000 = 1 RAM 4: 000000007ff0f000 - 0000000082a00000 = 2 RESERVED 5: 00000000f0000000 - 00000000f4000000 = 2 RESERVED 6: 00000000fed40000 - 00000000fed45000 = 2 RESERVED 7: 00000000fed90000 - 00000000fed92000 = 2 RESERVED 8: 0000000100000000 - 000000027d600000 = 1 RAM enter handle_19: NULL Booting from Hard Disk... Booting from 0000:7c00