coreboot

[ 0.000000] Linux version 6.1.30-1-lts (linux-lts@archlinux) (gcc (GCC) 13.1.1 20230429, GNU ld (GNU Binutils) 2.40.0) #1 SMP PREEMPT_DYNAMIC Wed, 24 May 2023 17:18:57 +0000

[ 0.000000] Command line: BOOT_IMAGE=boot/x86_64/vmlinuz archisobasedir=sysresccd archisolabel=RESCUE1001 iomem=relaxed initrd=boot/intel_ucode.img,boot/amd_ucode.img,boot/x86_64/sysresccd.img

[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'

[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'

[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'

[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256

[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.

[ 0.000000] signal: max sigframe size: 1776

[ 0.000000] BIOS-provided physical RAM map:

[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable

[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved

[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f386fff] usable

[ 0.000000] BIOS-e820: [mem 0x000000007f717000-0x00000000821fffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed84fff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved

[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047ddfffff] usable

[ 0.000000] NX (Execute Disable) protection: active

[ 0.000000] SMBIOS 3.0.0 present.

[ 0.000000] DMI: LENOVO ThinkPad T440p/ThinkPad T440p, BIOS 4.20-522-g251491c9d7 06/30/2023

[ 0.000000] tsc: Fast TSC calibration using PIT

[ 0.000000] tsc: Detected 2893.023 MHz processor

[ 0.000892] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[ 0.000894] e820: remove [mem 0x000a0000-0x000fffff] usable

[ 0.000899] last_pfn = 0x47de00 max_arch_pfn = 0x400000000

[ 0.001008] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT

[ 0.001487] last_pfn = 0x7f387 max_arch_pfn = 0x400000000

[ 0.008075] Using GB pages for direct mapping

[ 0.008169] RAMDISK: [mem 0x7b616000-0x7f386fff]

[ 0.008182] ACPI: Early table checksum verification disabled

[ 0.008184] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4)

[ 0.008188] ACPI: XSDT 0x000000007F7430E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20230331)

[ 0.008192] ACPI: FACP 0x000000007F746940 000114 (v06 COREv4 COREBOOT 00000000 CORE 20230331)

[ 0.008196] ACPI: DSDT 0x000000007F743280 0036B5 (v02 COREv4 COREBOOT 20141018 INTL 20230331)

[ 0.008199] ACPI: FACS 0x000000007F743240 000040

[ 0.008201] ACPI: FACS 0x000000007F743240 000040

[ 0.008203] ACPI: SSDT 0x000000007F746A60 001787 (v02 COREv4 COREBOOT 0000002A CORE 20230331)

[ 0.008205] ACPI: MCFG 0x000000007F7481F0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20230331)

[ 0.008207] ACPI: TCPA 0x000000007F748230 000032 (v02 COREv4 COREBOOT 00000000 CORE 20230331)

[ 0.008210] ACPI: APIC 0x000000007F748270 000072 (v03 COREv4 COREBOOT 00000000 CORE 20230331)

[ 0.008212] ACPI: DMAR 0x000000007F7482F0 0000C0 (v01 COREv4 COREBOOT 00000000 CORE 20230331)

[ 0.008214] ACPI: HPET 0x000000007F7483B0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20230331)

[ 0.008216] ACPI: Reserving FACP table memory at [mem 0x7f746940-0x7f746a53]

[ 0.008217] ACPI: Reserving DSDT table memory at [mem 0x7f743280-0x7f746934]

[ 0.008218] ACPI: Reserving FACS table memory at [mem 0x7f743240-0x7f74327f]

[ 0.008219] ACPI: Reserving FACS table memory at [mem 0x7f743240-0x7f74327f]

[ 0.008219] ACPI: Reserving SSDT table memory at [mem 0x7f746a60-0x7f7481e6]

[ 0.008220] ACPI: Reserving MCFG table memory at [mem 0x7f7481f0-0x7f74822b]

[ 0.008221] ACPI: Reserving TCPA table memory at [mem 0x7f748230-0x7f748261]

[ 0.008221] ACPI: Reserving APIC table memory at [mem 0x7f748270-0x7f7482e1]

[ 0.008222] ACPI: Reserving DMAR table memory at [mem 0x7f7482f0-0x7f7483af]

[ 0.008222] ACPI: Reserving HPET table memory at [mem 0x7f7483b0-0x7f7483e7]

[ 0.008276] No NUMA configuration found

[ 0.008277] Faking a node at [mem 0x0000000000000000-0x000000047ddfffff]

[ 0.008280] NODE_DATA(0) allocated [mem 0x47ddfb000-0x47ddfffff]

[ 0.008308] Zone ranges:

[ 0.008308] DMA [mem 0x0000000000001000-0x0000000000ffffff]

[ 0.008310] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]

[ 0.008311] Normal [mem 0x0000000100000000-0x000000047ddfffff]

[ 0.008312] Device empty

[ 0.008313] Movable zone start for each node

[ 0.008313] Early memory node ranges

[ 0.008314] node 0: [mem 0x0000000000001000-0x000000000009bfff]

[ 0.008315] node 0: [mem 0x0000000000100000-0x000000007f386fff]

[ 0.008316] node 0: [mem 0x0000000100000000-0x000000047ddfffff]

[ 0.008318] Initmem setup node 0 [mem 0x0000000000001000-0x000000047ddfffff]

[ 0.008321] On node 0, zone DMA: 1 pages in unavailable ranges

[ 0.008340] On node 0, zone DMA: 100 pages in unavailable ranges

[ 0.034260] On node 0, zone Normal: 3193 pages in unavailable ranges

[ 0.034329] On node 0, zone Normal: 8704 pages in unavailable ranges

[ 0.034339] Reserving Intel graphics memory at [mem 0x80200000-0x821fffff]

[ 0.034537] ACPI: PM-Timer IO Port: 0x508

[ 0.034543] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])

[ 0.034555] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23

[ 0.034557] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)

[ 0.034558] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[ 0.034561] ACPI: Using ACPI (MADT) for SMP configuration information

[ 0.034562] ACPI: HPET id: 0x8086a701 base: 0xfed00000

[ 0.034566] TSC deadline timer available

[ 0.034567] smpboot: Allowing 4 CPUs, 0 hotplug CPUs

[ 0.034575] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]

[ 0.034577] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x000effff]

[ 0.034577] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]

[ 0.034578] PM: hibernation: Registered nosave memory: [mem 0x7f387000-0x7f716fff]

[ 0.034579] PM: hibernation: Registered nosave memory: [mem 0x7f717000-0x821fffff]

[ 0.034580] PM: hibernation: Registered nosave memory: [mem 0x82200000-0xefffffff]

[ 0.034580] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]

[ 0.034581] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xfed0ffff]

[ 0.034581] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed19fff]

[ 0.034582] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed3ffff]

[ 0.034582] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]

[ 0.034583] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]

[ 0.034583] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed84fff]

[ 0.034584] PM: hibernation: Registered nosave memory: [mem 0xfed85000-0xfed8ffff]

[ 0.034585] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfed91fff]

[ 0.034585] PM: hibernation: Registered nosave memory: [mem 0xfed92000-0xffffffff]

[ 0.034587] [mem 0x82200000-0xefffffff] available for PCI devices

[ 0.034587] Booting paravirtualized kernel on bare hardware

[ 0.034589] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns

[ 0.038846] setup_percpu: NR_CPUS:320 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1

[ 0.038973] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u524288

[ 0.038977] pcpu-alloc: s221184 r8192 d28672 u524288 alloc=1*2097152

[ 0.038979] pcpu-alloc: [0] 0 1 2 3

[ 0.038993] Fallback order for Node 0: 0

[ 0.038995] Built 1 zonelists, mobility grouping on. Total pages: 4116800

[ 0.038996] Policy zone: Normal

[ 0.038997] Kernel command line: BOOT_IMAGE=boot/x86_64/vmlinuz archisobasedir=sysresccd archisolabel=RESCUE1001 iomem=relaxed initrd=boot/intel_ucode.img,boot/amd_ucode.img,boot/x86_64/sysresccd.img

[ 0.039064] Unknown kernel command line parameters "BOOT_IMAGE=boot/x86_64/vmlinuz archisobasedir=sysresccd archisolabel=RESCUE1001", will be passed to user space.

[ 0.039086] random: crng init done

[ 0.039755] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)

[ 0.040100] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)

[ 0.040224] mem auto-init: stack:all(zero), heap alloc:on, heap free:off

[ 0.040233] software IO TLB: area num 4.

[ 0.085042] Memory: 16264152K/16729224K available (16391K kernel code, 2138K rwdata, 11072K rodata, 2148K init, 5356K bss, 464812K reserved, 0K cma-reserved)

[ 0.085147] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[ 0.085157] Kernel/User page tables isolation: enabled

[ 0.085170] ftrace: allocating 46437 entries in 182 pages

[ 0.092071] ftrace: allocated 182 pages with 5 groups

[ 0.092662] Dynamic Preempt: voluntary

[ 0.092686] rcu: Preemptible hierarchical RCU implementation.

[ 0.092686] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.

[ 0.092687] Trampoline variant of Tasks RCU enabled.

[ 0.092688] Rude variant of Tasks RCU enabled.

[ 0.092688] Tracing variant of Tasks RCU enabled.

[ 0.092689] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.

[ 0.092689] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4

[ 0.096061] NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16

[ 0.096242] rcu: srcu_init: Setting srcu_struct sizes based on contention.

[ 0.096358] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)

[ 0.098038] Console: colour VGA+ 80x25

[ 0.098052] printk: console [tty0] enabled

[ 0.098071] ACPI: Core revision 20220331

[ 0.098135] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns

[ 0.098150] APIC: Switch to symmetric I/O mode setup

[ 0.098152] DMAR: Host address width 39

[ 0.098153] DMAR: DRHD base: 0x000000fed90000 flags: 0x0

[ 0.098158] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a

[ 0.098160] DMAR: DRHD base: 0x000000fed91000 flags: 0x1

[ 0.098163] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da

[ 0.098165] DMAR: RMRR base: 0x00000080000000 end: 0x000000821fffff

[ 0.098167] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1

[ 0.098169] DMAR-IR: HPET id 0 under DRHD base 0xfed91000

[ 0.098170] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.

[ 0.098707] DMAR-IR: Enabled IRQ remapping in x2apic mode

[ 0.098709] x2apic enabled

[ 0.098715] Switched APIC routing to cluster x2apic.

[ 0.099198] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 0.114819] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b3845505d, max_idle_ns: 440795339080 ns

[ 0.114823] Calibrating delay loop (skipped), value calculated using timer frequency.. 5788.13 BogoMIPS (lpj=9643410)

[ 0.114825] pid_max: default: 32768 minimum: 301

[ 0.114846] LSM: Security Framework initializing

[ 0.114851] landlock: Up and running.

[ 0.114852] Yama: becoming mindful.

[ 0.114859] LSM support for eBPF active

[ 0.114896] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)

[ 0.114924] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)

[ 0.115114] CPU0: Thermal monitoring enabled (TM1)

[ 0.115136] process: using mwait in idle threads

[ 0.115138] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024

[ 0.115139] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4

[ 0.115142] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization

[ 0.115144] Spectre V2 : Mitigation: Retpolines

[ 0.115144] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch

[ 0.115145] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT

[ 0.115145] Spectre V2 : Enabling Restricted Speculation for firmware calls

[ 0.115147] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier

[ 0.115148] Spectre V2 : User space: Mitigation: STIBP via prctl

[ 0.115149] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl

[ 0.115151] MDS: Mitigation: Clear CPU buffers

[ 0.115152] MMIO Stale Data: Unknown: No mitigations

[ 0.115153] SRBDS: Mitigation: Microcode

[ 0.128969] Freeing SMP alternatives memory: 40K

[ 0.129097] smpboot: CPU0: Intel(R) Core(TM) i7-4600M CPU @ 2.90GHz (family: 0x6, model: 0x3c, stepping: 0x3)

[ 0.129207] cblist_init_generic: Setting adjustable number of callback queues.

[ 0.129209] cblist_init_generic: Setting shift to 2 and lim to 1.

[ 0.129219] cblist_init_generic: Setting shift to 2 and lim to 1.

[ 0.129230] cblist_init_generic: Setting shift to 2 and lim to 1.

[ 0.129238] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.

[ 0.129270] ... version: 3

[ 0.129271] ... bit width: 48

[ 0.129271] ... generic registers: 4

[ 0.129272] ... value mask: 0000ffffffffffff

[ 0.129272] ... max period: 00007fffffffffff

[ 0.129273] ... fixed-purpose events: 3

[ 0.129274] ... event mask: 000000070000000f

[ 0.129383] Estimated ratio of average max frequency by base frequency (times 1024): 1235

[ 0.129399] rcu: Hierarchical SRCU implementation.

[ 0.129400] rcu: Max phase no-delay instances is 1000.

[ 0.134878] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.

[ 0.134921] smp: Bringing up secondary CPUs ...

[ 0.134990] x86: Booting SMP configuration:

[ 0.134991] .... node #0, CPUs: #1 #2

[ 0.161575] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.

[ 0.161599] #3

[ 0.171791] smp: Brought up 1 node, 4 CPUs

[ 0.171791] smpboot: Max logical packages: 1

[ 0.171791] smpboot: Total of 4 processors activated (23153.52 BogoMIPS)

[ 0.178241] devtmpfs: initialized

[ 0.178241] x86/mm: Memory block size: 128MB

[ 0.188200] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns

[ 0.188208] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)

[ 0.188246] pinctrl core: initialized pinctrl subsystem

[ 0.188349] PM: RTC time: 20:19:29, date: 2023-07-02

[ 0.191701] NET: Registered PF_NETLINK/PF_ROUTE protocol family

[ 0.191832] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations

[ 0.191832] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations

[ 0.191832] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations

[ 0.191832] audit: initializing netlink subsys (disabled)

[ 0.194838] audit: type=2000 audit(1688329169.096:1): state=initialized audit_enabled=0 res=1

[ 0.194897] thermal_sys: Registered thermal governor 'fair_share'

[ 0.194898] thermal_sys: Registered thermal governor 'bang_bang'

[ 0.194899] thermal_sys: Registered thermal governor 'step_wise'

[ 0.194900] thermal_sys: Registered thermal governor 'user_space'

[ 0.194901] thermal_sys: Registered thermal governor 'power_allocator'

[ 0.198166] cpuidle: using governor ladder

[ 0.198167] cpuidle: using governor menu

[ 0.198200] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[ 0.198265] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)

[ 0.198269] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820

[ 0.198279] PCI: Using configuration type 1 for base access

[ 0.198312] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on

[ 0.208222] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.

[ 0.214859] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages

[ 0.214859] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page

[ 0.214859] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages

[ 0.214859] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page

[ 0.218272] ACPI: Added _OSI(Module Device)

[ 0.218273] ACPI: Added _OSI(Processor Device)

[ 0.218274] ACPI: Added _OSI(3.0 _SCP Extensions)

[ 0.218275] ACPI: Added _OSI(Processor Aggregator Device)

[ 0.248156] ACPI: 2 ACPI AML tables successfully acquired and loaded

[ 0.408412] ACPI: EC: EC started

[ 0.408412] ACPI: EC: interrupt blocked

[ 0.408524] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62

[ 0.408526] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions

[ 0.408528] ACPI: Interpreter enabled

[ 0.411494] ACPI: PM: (supports S0 S1 S3 S4 S5)

[ 0.411495] ACPI: Using IOAPIC for interrupt routing

[ 0.411509] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[ 0.411509] PCI: Ignoring E820 reservations for host bridge windows

[ 0.441547] ACPI: PM: Power Resource [FPWR]

[ 0.441730] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])

[ 0.441735] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]

[ 0.441758] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]

[ 0.441817] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cebff])

[ 0.444971] PCI host bridge to bus 0000:00

[ 0.444973] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]

[ 0.444975] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]

[ 0.444976] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000cbfff window]

[ 0.444977] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000fffff window]

[ 0.444978] pci_bus 0000:00: root bus resource [mem 0x82200000-0xefffffff window]

[ 0.444979] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]

[ 0.444981] pci_bus 0000:00: root bus resource [bus 00-3f]

[ 0.444995] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000

[ 0.445066] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000

[ 0.445072] pci 0000:00:02.0: reg 0x10: [mem 0xdfc00000-0xdfffffff 64bit]

[ 0.445077] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]

[ 0.445081] pci 0000:00:02.0: reg 0x20: [io 0xffc0-0xffff]

[ 0.445090] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]

[ 0.445142] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300

[ 0.445149] pci 0000:00:03.0: reg 0x10: [mem 0xdf9c4000-0xdf9c7fff 64bit]

[ 0.448168] pci 0000:00:04.0: [8086:0c03] type 00 class 0x118000

[ 0.448174] pci 0000:00:04.0: reg 0x10: [mem 0xdf9c8000-0xdf9cffff 64bit]

[ 0.448250] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330

[ 0.448268] pci 0000:00:14.0: reg 0x10: [mem 0xdf9d0000-0xdf9dffff 64bit]

[ 0.448345] pci 0000:00:14.0: PME# supported from D3hot D3cold

[ 0.448455] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000

[ 0.448528] pci 0000:00:16.0: reg 0x10: [mem 0xdf9ba000-0xdf9ba00f 64bit]

[ 0.451779] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold

[ 0.454828] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000

[ 0.454842] pci 0000:00:19.0: reg 0x10: [mem 0xdf9e0000-0xdf9fffff]

[ 0.454850] pci 0000:00:19.0: reg 0x14: [mem 0xdf9bf000-0xdf9bffff]

[ 0.454858] pci 0000:00:19.0: reg 0x18: [io 0xffa0-0xffbf]

[ 0.454918] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold

[ 0.454968] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320

[ 0.454983] pci 0000:00:1a.0: reg 0x10: [mem 0xdf9bd000-0xdf9bd3ff]

[ 0.455057] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold

[ 0.455104] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300

[ 0.455122] pci 0000:00:1b.0: reg 0x10: [mem 0xdf9c0000-0xdf9c3fff 64bit]

[ 0.455200] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

[ 0.458232] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400

[ 0.458316] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[ 0.458400] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400

[ 0.458484] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold

[ 0.461535] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320

[ 0.461549] pci 0000:00:1d.0: reg 0x10: [mem 0xdf9bc000-0xdf9bc3ff]

[ 0.461624] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold

[ 0.461696] pci 0000:00:1f.0: [8086:8c4f] type 00 class 0x060100

[ 0.464859] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601

[ 0.464873] pci 0000:00:1f.2: reg 0x10: [io 0xff78-0xff7f]

[ 0.464881] pci 0000:00:1f.2: reg 0x14: [io 0xff6c-0xff6f]

[ 0.464890] pci 0000:00:1f.2: reg 0x18: [io 0xff70-0xff77]

[ 0.464898] pci 0000:00:1f.2: reg 0x1c: [io 0xff68-0xff6b]

[ 0.464906] pci 0000:00:1f.2: reg 0x20: [io 0xff80-0xff9f]

[ 0.464914] pci 0000:00:1f.2: reg 0x24: [mem 0xdf9be000-0xdf9be7ff]

[ 0.464954] pci 0000:00:1f.2: PME# supported from D3hot

[ 0.465011] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500

[ 0.465029] pci 0000:00:1f.3: reg 0x10: [mem 0xdf9bb000-0xdf9bb0ff 64bit]

[ 0.465050] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]

[ 0.468186] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000

[ 0.468249] pci 0000:02:00.0: reg 0x10: [mem 0xdfb00000-0xdfb00fff]

[ 0.471687] pci 0000:02:00.0: supports D1 D2

[ 0.471688] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold

[ 0.474961] pci 0000:00:1c.0: PCI bridge to [bus 02]

[ 0.474967] pci 0000:00:1c.0: bridge window [mem 0xdfb00000-0xdfbfffff]

[ 0.475069] pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000

[ 0.475124] pci 0000:03:00.0: reg 0x10: [mem 0xdfa00000-0xdfa01fff 64bit]

[ 0.478336] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold

[ 0.481607] pci 0000:00:1c.1: PCI bridge to [bus 03]

[ 0.481612] pci 0000:00:1c.1: bridge window [mem 0xdfa00000-0xdfafffff]

[ 0.481747] ACPI: PCI: Interrupt link LNKA configured for IRQ 0

[ 0.481748] ACPI: PCI: Interrupt link LNKA disabled

[ 0.481792] ACPI: PCI: Interrupt link LNKB configured for IRQ 0

[ 0.481793] ACPI: PCI: Interrupt link LNKB disabled

[ 0.481832] ACPI: PCI: Interrupt link LNKC configured for IRQ 0

[ 0.481833] ACPI: PCI: Interrupt link LNKC disabled

[ 0.484825] ACPI: PCI: Interrupt link LNKD configured for IRQ 0

[ 0.484826] ACPI: PCI: Interrupt link LNKD disabled

[ 0.484871] ACPI: PCI: Interrupt link LNKE configured for IRQ 0

[ 0.484872] ACPI: PCI: Interrupt link LNKE disabled

[ 0.484912] ACPI: PCI: Interrupt link LNKF configured for IRQ 0

[ 0.484912] ACPI: PCI: Interrupt link LNKF disabled

[ 0.484954] ACPI: PCI: Interrupt link LNKG configured for IRQ 0

[ 0.484955] ACPI: PCI: Interrupt link LNKG disabled

[ 0.484993] ACPI: PCI: Interrupt link LNKH configured for IRQ 0

[ 0.484994] ACPI: PCI: Interrupt link LNKH disabled

[ 0.488520] ACPI: EC: interrupt unblocked

[ 0.488521] ACPI: EC: event unblocked

[ 0.488526] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62

[ 0.488527] ACPI: EC: GPE=0x11

[ 0.488528] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC initialization complete

[ 0.488530] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events

[ 0.491533] iommu: Default domain type: Translated

[ 0.491533] iommu: DMA domain TLB invalidation policy: lazy mode

[ 0.491583] SCSI subsystem initialized

[ 0.494835] libata version 3.00 loaded.

[ 0.494835] ACPI: bus type USB registered

[ 0.494843] usbcore: registered new interface driver usbfs

[ 0.494847] usbcore: registered new interface driver hub

[ 0.494851] usbcore: registered new device driver usb

[ 0.494868] pps_core: LinuxPPS API ver. 1 registered

[ 0.494869] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

[ 0.494871] PTP clock support registered

[ 0.494877] EDAC MC: Ver: 3.0.0

[ 0.494979] NetLabel: Initializing

[ 0.494979] NetLabel: domain hash size = 128

[ 0.494979] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO

[ 0.494979] NetLabel: unlabeled traffic allowed by default

[ 0.494979] mctp: management component transport protocol core

[ 0.494979] NET: Registered PF_MCTP protocol family

[ 0.494979] PCI: Using ACPI for IRQ routing

[ 0.511526] PCI: pci_cache_line_size set to 64 bytes

[ 0.511626] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]

[ 0.511628] e820: reserve RAM buffer [mem 0x7f387000-0x7fffffff]

[ 0.511629] e820: reserve RAM buffer [mem 0x47de00000-0x47fffffff]

[ 0.514835] pci 0000:00:02.0: vgaarb: setting as boot VGA device

[ 0.514835] pci 0000:00:02.0: vgaarb: bridge control possible

[ 0.514835] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none

[ 0.514835] vgaarb: loaded

[ 0.521557] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0

[ 0.521563] hpet0: 8 comparators, 64-bit 14.318180 MHz counter

[ 0.541538] clocksource: Switched to clocksource tsc-early

[ 0.548604] VFS: Disk quotas dquot_6.6.0

[ 0.548618] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[ 0.548670] pnp: PnP ACPI init

[ 0.548748] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved

[ 0.548752] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved

[ 0.548754] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved

[ 0.548755] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved

[ 0.548757] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved

[ 0.548758] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved

[ 0.548760] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved

[ 0.548761] system 00:00: [mem 0xfed45000-0xfed8ffff] could not be reserved

[ 0.548763] system 00:00: [mem 0xfed80000-0xfed83fff] has been reserved

[ 0.548764] system 00:00: [mem 0xfed84000-0xfed84fff] has been reserved

[ 0.549209] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved

[ 0.549244] system 00:02: [io 0x0500-0x05fe] has been reserved

[ 0.549246] system 00:02: [io 0x0480-0x04bf] has been reserved

[ 0.549325] pnp: PnP ACPI: found 7 devices

[ 0.554709] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

[ 0.554753] NET: Registered PF_INET protocol family

[ 0.554866] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)

[ 0.557335] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)

[ 0.557360] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)

[ 0.557421] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)

[ 0.557618] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)

[ 0.557859] TCP: Hash tables configured (established 131072 bind 65536)

[ 0.557918] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)

[ 0.557985] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)

[ 0.558018] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)

[ 0.558060] NET: Registered PF_UNIX/PF_LOCAL protocol family

[ 0.558065] NET: Registered PF_XDP protocol family

[ 0.558074] pci 0000:00:1c.0: PCI bridge to [bus 02]

[ 0.558083] pci 0000:00:1c.0: bridge window [mem 0xdfb00000-0xdfbfffff]

[ 0.558092] pci 0000:00:1c.1: PCI bridge to [bus 03]

[ 0.558096] pci 0000:00:1c.1: bridge window [mem 0xdfa00000-0xdfafffff]

[ 0.558104] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]

[ 0.558106] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]

[ 0.558107] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000cbfff window]

[ 0.558108] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000fffff window]

[ 0.558109] pci_bus 0000:00: resource 8 [mem 0x82200000-0xefffffff window]

[ 0.558110] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff window]

[ 0.558111] pci_bus 0000:02: resource 1 [mem 0xdfb00000-0xdfbfffff]

[ 0.558113] pci_bus 0000:03: resource 1 [mem 0xdfa00000-0xdfafffff]

[ 0.558803] PCI: CLS 64 bytes, default 64

[ 0.558814] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[ 0.558815] software IO TLB: mapped [mem 0x0000000077616000-0x000000007b616000] (64MB)

[ 0.558845] Trying to unpack rootfs image as initramfs...

[ 0.565653] Initialise system trusted keyrings

[ 0.565665] Key type blacklist registered

[ 0.565708] workingset: timestamp_bits=41 max_order=22 bucket_order=0

[ 0.567363] zbud: loaded

[ 0.567592] integrity: Platform Keyring initialized

[ 0.567595] integrity: Machine keyring initialized

[ 0.576308] Key type asymmetric registered

[ 0.576312] Asymmetric key parser 'x509' registered

[ 0.582136] Freeing initrd memory: 62916K

[ 0.582358] alg: self-tests for CTR-KDF (hmac(sha256)) passed

[ 0.582380] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)

[ 0.582407] io scheduler mq-deadline registered

[ 0.582409] io scheduler kyber registered

[ 0.582449] io scheduler bfq registered

[ 0.582825] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26

[ 0.582886] pcieport 0000:00:1c.0: AER: enabled with IRQ 26

[ 0.583117] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27

[ 0.583184] pcieport 0000:00:1c.1: AER: enabled with IRQ 27

[ 0.583271] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[ 0.583683] ACPI: AC: AC Adapter [AC] (off-line)

[ 0.583725] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2e/PNP0C09:00/PNP0C0E:00/input/input0

[ 0.583770] ACPI: button: Sleep Button [SLPB]

[ 0.583793] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2e/PNP0C09:00/PNP0C0D:00/input/input1

[ 0.583822] ACPI: button: Lid Switch [LID]

[ 0.583845] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2

[ 0.583879] ACPI: button: Power Button [PWRF]

[ 0.585076] thermal LNXTHERM:00: registered as thermal_zone0

[ 0.585078] ACPI: thermal: Thermal Zone [THM0] (43 C)

[ 0.585765] thermal LNXTHERM:01: registered as thermal_zone1

[ 0.585767] ACPI: thermal: Thermal Zone [THM1] (27 C)

[ 0.586047] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled

[ 0.588770] Non-volatile memory driver v1.3

[ 0.588771] Linux agpgart interface v0.103

[ 0.592492] ACPI: battery: Slot [BAT0] (battery present)

[ 0.592601] ACPI: battery: Slot [BAT1] (battery absent)

[ 0.592930] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)

[ 0.653885] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.

[ 0.653926] ACPI: bus type drm_connector registered

[ 0.654449] ahci 0000:00:1f.2: version 3.0

[ 0.654643] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled

[ 0.654678] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x23 impl SATA mode

[ 0.654681] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part apst

[ 0.655042] scsi host0: ahci

[ 0.655134] scsi host1: ahci

[ 0.655218] scsi host2: ahci

[ 0.655294] scsi host3: ahci

[ 0.655369] scsi host4: ahci

[ 0.655431] scsi host5: ahci

[ 0.655460] ata1: SATA max UDMA/133 abar m2048@0xdf9be000 port 0xdf9be100 irq 28

[ 0.655464] ata2: SATA max UDMA/133 abar m2048@0xdf9be000 port 0xdf9be180 irq 28

[ 0.655465] ata3: DUMMY

[ 0.655465] ata4: DUMMY

[ 0.655466] ata5: DUMMY

[ 0.655468] ata6: SATA max UDMA/133 abar m2048@0xdf9be000 port 0xdf9be380 irq 28

[ 0.655638] ehci-pci 0000:00:1a.0: EHCI Host Controller

[ 0.655643] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1

[ 0.655658] ehci-pci 0000:00:1a.0: debug port 2

[ 0.659572] ehci-pci 0000:00:1a.0: irq 16, io mem 0xdf9bd000

[ 0.671933] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00

[ 0.672010] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01

[ 0.672013] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 0.672015] usb usb1: Product: EHCI Host Controller

[ 0.672016] usb usb1: Manufacturer: Linux 6.1.30-1-lts ehci_hcd

[ 0.672017] usb usb1: SerialNumber: 0000:00:1a.0

[ 0.672201] hub 1-0:1.0: USB hub found

[ 0.672206] hub 1-0:1.0: 2 ports detected

[ 0.672439] ehci-pci 0000:00:1d.0: EHCI Host Controller

[ 0.672444] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2

[ 0.672459] ehci-pci 0000:00:1d.0: debug port 2

[ 0.676360] ehci-pci 0000:00:1d.0: irq 23, io mem 0xdf9bc000

[ 0.688605] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00

[ 0.688659] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01

[ 0.688662] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 0.688663] usb usb2: Product: EHCI Host Controller

[ 0.688664] usb usb2: Manufacturer: Linux 6.1.30-1-lts ehci_hcd

[ 0.688666] usb usb2: SerialNumber: 0000:00:1d.0

[ 0.688860] hub 2-0:1.0: USB hub found

[ 0.688866] hub 2-0:1.0: 2 ports detected

[ 0.689009] usbcore: registered new interface driver usbserial_generic

[ 0.689014] usbserial: USB Serial support registered for generic

[ 0.689336] rtc_cmos 00:03: RTC can wake from S4

[ 0.689703] rtc_cmos 00:03: registered as rtc0

[ 0.689752] rtc_cmos 00:03: setting system clock to 2023-07-02T20:19:29 UTC (1688329169)

[ 0.689775] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram

[ 0.689897] intel_pstate: Intel P-state driver initializing

[ 0.690312] ledtrig-cpu: registered to indicate activity on CPUs

[ 0.690407] hid: raw HID events driver (C) Jiri Kosina

[ 0.690472] drop_monitor: Initializing network drop monitor service

[ 0.701414] Initializing XFRM netlink socket

[ 0.701504] NET: Registered PF_INET6 protocol family

[ 0.701980] Segment Routing with IPv6

[ 0.701981] RPL Segment Routing with IPv6

[ 0.701988] In-situ OAM (IOAM) with IPv6

[ 0.702003] NET: Registered PF_PACKET protocol family

[ 0.702176] microcode: sig=0x306c3, pf=0x10, revision=0x28

[ 0.702187] microcode: Microcode Update Driver: v2.2.

[ 0.702192] IPI shorthand broadcast: enabled

[ 0.702213] sched_clock: Marking stable (700252017, 1867261)->(338100431, 364018847)

[ 0.702347] registered taskstats version 1

[ 0.702403] Loading compiled-in X.509 certificates

[ 0.704894] Loaded X.509 cert 'Build time autogenerated kernel key: 0cd463d174e2070d2d51ef62220aed00ebc7ff7f'

[ 0.705031] zswap: loaded using pool lz4/z3fold

[ 0.705162] Key type .fscrypt registered

[ 0.705163] Key type fscrypt-provisioning registered

[ 0.705998] PM: Magic number: 15:548:345

[ 0.706020] tty tty62: hash matches

[ 0.706113] RAS: Correctable Errors collector initialized.

[ 0.921931] usb 1-1: new high-speed USB device number 2 using ehci-pci

[ 0.938579] usb 2-1: new high-speed USB device number 2 using ehci-pci

[ 0.969244] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[ 0.970800] ata1.00: ATA-10: SK hynix SC311 SATA 128GB, 70000P10, max UDMA/133

[ 0.970871] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA

[ 0.971681] ata1.00: Features: Dev-Sleep

[ 0.973072] ata1.00: configured for UDMA/133

[ 0.973455] scsi 0:0:0:0: Direct-Access ATA SK hynix SC311 S 0P10 PQ: 0 ANSI: 5

[ 0.974525] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)

[ 0.974531] sd 0:0:0:0: [sda] 4096-byte physical blocks

[ 0.974549] sd 0:0:0:0: [sda] Write Protect is off

[ 0.974554] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 0.974580] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 0.974617] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes

[ 1.000591] sda: sda1 sda2 sda3 sda4 sda5 sda6

[ 1.000864] sd 0:0:0:0: [sda] Attached SCSI disk

[ 1.069417] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05

[ 1.069431] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 1.069957] hub 1-1:1.0: USB hub found

[ 1.070118] hub 1-1:1.0: 6 ports detected

[ 1.085721] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05

[ 1.085727] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 1.086127] hub 2-1:1.0: USB hub found

[ 1.086348] hub 2-1:1.0: 8 ports detected

[ 1.289748] ata2: SATA link down (SStatus 0 SControl 300)

[ 1.561949] tsc: Refined TSC clocksource calibration: 2893.301 MHz

[ 1.561963] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b48abc161, max_idle_ns: 440795297541 ns

[ 1.562007] clocksource: Switched to clocksource tsc

[ 1.603100] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

[ 1.605085] ata6.00: supports DRM functions and may not be fully accessible

[ 1.605095] ata6.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB6Q, max UDMA/133

[ 1.605566] ata6.00: NCQ Send/Recv Log not supported

[ 1.605577] ata6.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA

[ 1.606128] ata6.00: Features: Trust

[ 1.606407] ata6.00: supports DRM functions and may not be fully accessible

[ 1.606896] ata6.00: NCQ Send/Recv Log not supported

[ 1.607456] ata6.00: configured for UDMA/133

[ 1.618036] scsi 5:0:0:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ: 0 ANSI: 5

[ 1.619377] sd 5:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)

[ 1.619394] sd 5:0:0:0: [sdb] Write Protect is off

[ 1.619399] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00

[ 1.619419] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.619461] sd 5:0:0:0: [sdb] Preferred minimum I/O size 512 bytes

[ 1.641708] sdb: sdb1

[ 1.642344] sd 5:0:0:0: [sdb] supports TCG Opal

[ 1.642349] sd 5:0:0:0: [sdb] Attached SCSI disk

[ 1.643227] Freeing unused decrypted memory: 2036K

[ 1.643493] Freeing unused kernel image (initmem) memory: 2148K

[ 1.655305] Write protecting the kernel read-only data: 30720k

[ 1.655688] Freeing unused kernel image (text/rodata gap) memory: 2040K

[ 1.655869] Freeing unused kernel image (rodata/data gap) memory: 1216K

[ 1.719653] x86/mm: Checked W+X mappings: passed, no W+X pages found.

[ 1.719657] rodata_test: all tests were successful

[ 1.719659] x86/mm: Checking user space page tables

[ 1.762127] x86/mm: Checked W+X mappings: passed, no W+X pages found.

[ 1.762131] Run /init as init process

[ 1.762132] with arguments:

[ 1.762133] /init

[ 1.762134] with environment:

[ 1.762134] HOME=/

[ 1.762135] TERM=linux

[ 1.762136] BOOT_IMAGE=boot/x86_64/vmlinuz

[ 1.762136] archisobasedir=sysresccd

[ 1.762137] archisolabel=RESCUE1001

[ 5.637046] fuse: init (API version 7.37)

[ 5.728740] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12

[ 5.730497] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 5.730504] serio: i8042 AUX port at 0x60,0x64 irq 12

[ 5.743509] xhci_hcd 0000:00:14.0: xHCI Host Controller

[ 5.743518] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3

[ 5.744593] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810

[ 5.744802] xhci_hcd 0000:00:14.0: xHCI Host Controller

[ 5.744806] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4

[ 5.744809] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed

[ 5.744854] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01

[ 5.744858] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 5.744860] usb usb3: Product: xHCI Host Controller

[ 5.744861] usb usb3: Manufacturer: Linux 6.1.30-1-lts xhci-hcd

[ 5.744863] usb usb3: SerialNumber: 0000:00:14.0

[ 5.745003] hub 3-0:1.0: USB hub found

[ 5.745026] hub 3-0:1.0: 15 ports detected

[ 5.745437] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01

[ 5.745440] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 5.745442] usb usb4: Product: xHCI Host Controller

[ 5.745444] usb usb4: Manufacturer: Linux 6.1.30-1-lts xhci-hcd

[ 5.745445] usb usb4: SerialNumber: 0000:00:14.0

[ 5.745537] hub 4-0:1.0: USB hub found

[ 5.745551] hub 4-0:1.0: 6 ports detected

[ 5.751831] e1000e: Intel(R) PRO/1000 Network Driver

[ 5.751833] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.

[ 5.752052] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode

[ 5.773159] cryptd: max_cpu_qlen set to 1000

[ 5.792175] AVX2 version of gcm_enc/dec engaged.

[ 5.792205] AES CTR mode by8 optimization enabled

[ 5.820862] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3

[ 5.891998] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock

[ 5.988904] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 02:ad:10:00:00:07

[ 5.988907] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection

[ 5.988945] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 12, PBA No: FFFFFF-0FF

[ 5.995220] usb 3-6: new high-speed USB device number 2 using xhci_hcd

[ 6.078832] i915 0000:00:02.0: vgaarb: deactivate vga console

[ 6.079828] Console: switching to colour dummy device 80x25

[ 6.089298] raid6: skipped pq benchmark and selected avx2x4

[ 6.089301] raid6: using avx2x2 recovery algorithm

[ 6.094647] xor: automatically using best checksumming function avx

[ 6.131256] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem

[ 6.136269] usb 3-6: New USB device found, idVendor=13fe, idProduct=5200, bcdDevice= 1.10

[ 6.136275] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[ 6.136277] usb 3-6: Product: USB DISK 3.0

[ 6.136279] usb 3-6: Manufacturer:

[ 6.136280] usb 3-6: SerialNumber: 070D3C41D646BD07

[ 6.186454] i915 0000:00:02.0: [drm] Skipping intel_backlight registration

[ 6.187270] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

[ 6.187624] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

[ 6.187859] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5

[ 6.189705] usb-storage 3-6:1.0: USB Mass Storage device detected

[ 6.189796] scsi host6: usb-storage 3-6:1.0

[ 6.189861] usbcore: registered new interface driver usb-storage

[ 6.192895] usbcore: registered new interface driver uas

[ 6.195699] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes

[ 6.197632] BTRFS: device label DELPHI_LINUX devid 1 transid 237 /dev/sda4 scanned by (udev-worker) (299)

[ 6.198121] BTRFS: device fsid 7b042eac-eae0-4af4-9f3d-bd81cfdc1434 devid 1 transid 4544 /dev/sda2 scanned by (udev-worker) (273)

[ 6.258614] usb 3-11: new full-speed USB device number 3 using xhci_hcd

[ 6.400404] usb 3-11: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01

[ 6.400418] usb 3-11: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 6.525341] usb 3-12: new high-speed USB device number 4 using xhci_hcd

[ 6.734091] usb 3-12: New USB device found, idVendor=5986, idProduct=0268, bcdDevice= 0.03

[ 6.734106] usb 3-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 6.734112] usb 3-12: Product: Integrated Camera

[ 6.734116] usb 3-12: Manufacturer: SunplusIT INC.

[ 6.833984] acpi device:0b: registered as cooling_device5

[ 7.028014] fbcon: i915drmfb (fb0) is primary device

[ 7.216570] scsi 6:0:0:0: Direct-Access USB DISK 3.0 PMAP PQ: 0 ANSI: 6

[ 7.217238] sd 6:0:0:0: [sdc] 60566016 512-byte logical blocks: (31.0 GB/28.9 GiB)

[ 7.217444] sd 6:0:0:0: [sdc] Write Protect is off

[ 7.217446] sd 6:0:0:0: [sdc] Mode Sense: 2b 00 00 08

[ 7.217659] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA

[ 7.400084] sdc: sdc1 sdc2

[ 7.400615] sd 6:0:0:0: [sdc] Attached SCSI removable disk

[ 8.132070] Console: switching to colour frame buffer device 200x56

[ 8.152292] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

[ 8.195535] Key type trusted registered

[ 8.207535] Key type encrypted registered

[ 8.214991] device-mapper: uevent: version 1.0.3

[ 8.215047] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com

[ 8.292516] ISO 9660 Extensions: RRIP_1991A

[ 8.463525] loop: module loaded

[ 8.464942] loop0: detected capacity change from 0 to 1349680

[ 8.515625] squashfs: version 4.0 (2009/01/31) Phillip Lougher

[ 8.528033] overlayfs: "xino" feature enabled using 2 upper inode bits.

[ 9.474521] systemd[1]: systemd 253.4-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)

[ 9.474526] systemd[1]: Detected architecture x86-64.

[ 9.496405] systemd[1]: Hostname set to <sysrescue>.

[ 9.497525] systemd[1]: Initializing machine ID from random generator.

[ 9.922040] systemd[1]: bpf-lsm: LSM BPF program attached

[ 10.162927] systemd[1]: Queued start job for default target Multi-User System.

[ 10.192874] systemd[1]: Created slice Slice /system/getty.

[ 10.193204] systemd[1]: Created slice Slice /system/modprobe.

[ 10.193425] systemd[1]: Created slice User and Session Slice.

[ 10.193526] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.

[ 10.193613] systemd[1]: Started Forward Password Requests to Wall Directory Watch.

[ 10.193791] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.

[ 10.193854] systemd[1]: Reached target Local Encrypted Volumes.

[ 10.193922] systemd[1]: Reached target Local Integrity Protected Volumes.

[ 10.193980] systemd[1]: Reached target Path Units.

[ 10.194025] systemd[1]: Reached target Remote File Systems.

[ 10.194066] systemd[1]: Reached target Slice Units.

[ 10.194114] systemd[1]: Reached target Swaps.

[ 10.194159] systemd[1]: Reached target Local Verity Protected Volumes.

[ 10.194247] systemd[1]: Listening on Device-mapper event daemon FIFOs.

[ 10.195483] systemd[1]: Listening on LVM2 poll daemon socket.

[ 10.197297] systemd[1]: Listening on Process Core Dump Socket.

[ 10.197444] systemd[1]: Listening on Journal Socket (/dev/log).

[ 10.197576] systemd[1]: Listening on Journal Socket.

[ 10.199110] systemd[1]: Listening on udev Control Socket.

[ 10.199243] systemd[1]: Listening on udev Kernel Socket.

[ 10.199933] systemd[1]: Mounting Huge Pages File System...

[ 10.200597] systemd[1]: Mounting POSIX Message Queue File System...

[ 10.201461] systemd[1]: Mounting Kernel Debug File System...

[ 10.202199] systemd[1]: Mounting Kernel Trace File System...

[ 10.202859] systemd[1]: Mounting Temporary Directory /tmp...

[ 10.209019] systemd[1]: Starting Create List of Static Device Nodes...

[ 10.210790] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...

[ 10.212509] systemd[1]: Starting Load Kernel Module configfs...

[ 10.214354] systemd[1]: Starting Load Kernel Module dm_mod...

[ 10.216274] systemd[1]: Starting Load Kernel Module drm...

[ 10.218148] systemd[1]: Starting Load Kernel Module fuse...

[ 10.220108] systemd[1]: Starting Load Kernel Module loop...

[ 10.222669] systemd[1]: Starting Journal Service...

[ 10.231571] systemd[1]: Starting Load Kernel Modules...

[ 10.232498] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).

[ 10.233542] systemd[1]: Starting Remount Root and Kernel File Systems...

[ 10.235367] systemd[1]: Starting Coldplug All udev Devices...

[ 10.237562] systemd[1]: Mounted Huge Pages File System.

[ 10.238566] systemd[1]: Mounted POSIX Message Queue File System.

[ 10.239503] systemd[1]: Mounted Kernel Debug File System.

[ 10.240076] systemd[1]: Mounted Kernel Trace File System.

[ 10.240634] systemd[1]: Mounted Temporary Directory /tmp.

[ 10.263269] systemd[1]: Finished Create List of Static Device Nodes.

[ 10.264545] systemd[1]: modprobe@configfs.service: Deactivated successfully.

[ 10.278045] systemd-journald[469]: Collecting audit messages is disabled.

[ 10.298790] systemd[1]: Finished Load Kernel Module configfs.

[ 10.299721] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.

[ 10.321377] sd 0:0:0:0: Attached scsi generic sg0 type 0

[ 10.321415] sd 5:0:0:0: Attached scsi generic sg1 type 0

[ 10.321454] sd 6:0:0:0: Attached scsi generic sg2 type 0

[ 10.329702] systemd[1]: Finished Load Kernel Module dm_mod.

[ 10.330175] systemd[1]: Started Journal Service.

[ 10.502841] systemd-journald[469]: Received client request to flush runtime journal.

[ 11.101843] input: PC Speaker as /devices/platform/pcspkr/input/input6

[ 11.258718] e1000e 0000:00:19.0 eno0: renamed from eth0

[ 11.266488] EDAC ie31200: No ECC support

[ 11.266930] EDAC ie31200: No ECC support

[ 11.356821] mei_me 0000:00:16.0: H_RST is set = 0x80000015

[ 11.383017] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt

[ 11.383174] i2c i2c-9: 2/2 memory slots populated (from DMI)

[ 11.383617] i2c i2c-9: Successfully instantiated SPD at 0x50

[ 11.384247] i2c i2c-9: Successfully instantiated SPD at 0x51

[ 11.589998] mc: Linux media interface: v0.10

[ 11.830569] gpio_ich gpio_ich.2.auto: GPIO from 948 to 1023

[ 11.891513] iTCO_vendor_support: vendor-support=0

[ 12.303932] psmouse serio1: synaptics: queried max coordinates: x [..5674], y [..4684]

[ 12.334408] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1170..]

[ 12.334416] psmouse serio1: synaptics: Trying to set up SMBus access

[ 12.337368] psmouse serio1: synaptics: SMbus companion is not ready yet

[ 12.397206] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x12f800/0x0, board id: 2964, fw id: 2560

[ 12.397218] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0

[ 12.451101] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7

[ 13.086199] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3

[ 13.290666] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8

[ 13.375329] mei_me 0000:00:16.0: wait hw ready failed

[ 13.375352] mei_me 0000:00:16.0: hw_start failed ret = -62

[ 13.375389] mei_me 0000:00:16.0: H_RST is set = 0x80000015

[ 15.508660] mei_me 0000:00:16.0: wait hw ready failed

[ 15.508670] mei_me 0000:00:16.0: hw_start failed ret = -62

[ 15.508699] mei_me 0000:00:16.0: H_RST is set = 0x80000015

[ 17.642004] mei_me 0000:00:16.0: wait hw ready failed

[ 17.642025] mei_me 0000:00:16.0: hw_start failed ret = -62

[ 17.642052] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device

[ 17.642056] mei_me 0000:00:16.0: reset failed ret = -19

[ 17.642060] mei_me 0000:00:16.0: link layer initialization failed.

[ 17.642063] mei_me 0000:00:16.0: init hw failure.

[ 17.642220] mei_me 0000:00:16.0: initialization failed.

[ 17.769314] iTCO_wdt iTCO_wdt.1.auto: Found a Lynx Point TCO device (Version=2, TCOBASE=0x0560)

[ 17.769684] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)

[ 17.785308] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer

[ 17.785313] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules

[ 17.785314] RAPL PMU: hw unit of domain package 2^-14 Joules

[ 17.785315] RAPL PMU: hw unit of domain dram 2^-14 Joules

[ 17.785316] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules

[ 17.843660] videodev: Linux video capture interface: v2.00

[ 17.843740] Bluetooth: Core ver 2.22

[ 17.843759] NET: Registered PF_BLUETOOTH protocol family

[ 17.843760] Bluetooth: HCI device and connection manager initialized

[ 17.843764] Bluetooth: HCI socket layer initialized

[ 17.843766] Bluetooth: L2CAP socket layer initialized

[ 17.843770] Bluetooth: SCO socket layer initialized

[ 17.845072] cfg80211: Loading compiled-in X.509 certificates for regulatory database

[ 17.848914] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'

[ 17.868035] spi-nor spi0.0: s25fl064k (8192 Kbytes)

[ 17.868862] mousedev: PS/2 mouse device common for all mice

[ 17.920922] Creating 1 MTD partitions on "intel-spi":

[ 17.920928] 0x000000000000-0x000000c00000 : "BIOS"

[ 17.920930] mtd: partition "BIOS" extends beyond the end of device "intel-spi" -- size truncated to 0x800000

[ 17.941640] spi-nor spi0.1: w25q32 (4096 Kbytes)

[ 17.981597] at24 9-0050: supply vcc not found, using dummy regulator

[ 17.991344] at24 9-0050: 256 byte spd EEPROM, read-only

[ 17.991391] at24 9-0051: supply vcc not found, using dummy regulator

[ 17.994423] at24 9-0051: 256 byte spd EEPROM, read-only

[ 17.995299] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

[ 18.065147] usb 3-12: Found UVC 1.00 device Integrated Camera (5986:0268)

[ 18.079819] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9

[ 18.079869] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10

[ 18.079910] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11

[ 18.084121] Intel(R) Wireless WiFi driver for Linux

[ 18.087208] usbcore: registered new interface driver btusb

[ 18.111240] Bluetooth: hci0: Legacy ROM 2.5 revision 8.0 build 2 week 3 2013

[ 18.116210] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker

[ 18.116216] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

[ 18.116219] snd_hda_codec_realtek hdaudioC1D0: hp_outs=2 (0x16/0x15/0x0/0x0/0x0)

[ 18.116221] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0

[ 18.116223] snd_hda_codec_realtek hdaudioC1D0: inputs:

[ 18.116224] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19

[ 18.116226] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a

[ 18.116228] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12

[ 18.119501] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.0/input/input12

[ 18.119548] usbcore: registered new interface driver uvcvideo

[ 18.141320] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq

[ 18.158981] iwlwifi 0000:03:00.0: loaded firmware version 17.3216344376.0 7260-17.ucode op_mode iwlmvm

[ 18.212454] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13

[ 18.212486] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14

[ 18.212515] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15

[ 18.212541] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16

[ 18.344280] intel_rapl_common: Found RAPL domain package

[ 18.344285] intel_rapl_common: Found RAPL domain core

[ 18.344286] intel_rapl_common: Found RAPL domain uncore

[ 18.344287] intel_rapl_common: Found RAPL domain dram

[ 18.399780] Bluetooth: hci0: Intel BT fw patch 0x57 completed & activated

[ 18.421789] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144

[ 18.440657] iwlwifi 0000:03:00.0: base HW address: cc:3d:82:10:94:10, OTP minor version: 0x0

[ 18.630666] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'

[ 18.643702] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0

[ 19.764969] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)

[ 19.764975] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)

[ 19.764977] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)

[ 19.764978] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)

[ 19.764979] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)

[ 19.764981] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)

[ 19.764982] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)

[ 20.034238] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)

[ 20.034244] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)

[ 20.034246] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)

[ 20.034247] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)

[ 20.034249] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)

[ 20.034250] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)

[ 20.034251] ACPI: \: failed to evaluate _DSM bf0212f2-788f-c64d-a5b3-1f738e285ade (0x1001)