|
[ 0.000000] Linux version 5.4.0-58-generic (buildd@lcy01-amd64-004) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #64-Ubuntu SMP Wed Dec 9 08:16:25 UTC 2020 (Ubuntu 5.4.0-58.64-generic 5.4.73)
|
|
[ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/linuxmint.seed boot=casper iso-scan/filename= quiet splash --
|
|
[ 0.000000] KERNEL supported cpus:
|
|
[ 0.000000] Intel GenuineIntel
|
|
[ 0.000000] AMD AuthenticAMD
|
|
[ 0.000000] Hygon HygonGenuine
|
|
[ 0.000000] Centaur CentaurHauls
|
|
[ 0.000000] zhaoxin Shanghai
|
|
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
|
|
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
|
|
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
|
|
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
|
|
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
|
|
[ 0.000000] BIOS-provided physical RAM map:
|
|
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
|
|
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
|
|
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
|
|
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007d86bfff] usable
|
|
[ 0.000000] BIOS-e820: [mem 0x000000007d86c000-0x000000007d90afff] reserved
|
|
[ 0.000000] BIOS-e820: [mem 0x000000007d90b000-0x000000007f2adfff] usable
|
|
[ 0.000000] BIOS-e820: [mem 0x000000007f2ae000-0x000000007f3f1fff] reserved
|
|
[ 0.000000] BIOS-e820: [mem 0x000000007f3f2000-0x000000007f3fcfff] usable
|
|
[ 0.000000] BIOS-e820: [mem 0x000000007f3fd000-0x000000007f3fdfff] ACPI data
|
|
[ 0.000000] BIOS-e820: [mem 0x000000007f3fe000-0x000000007f715fff] usable
|
|
[ 0.000000] BIOS-e820: [mem 0x000000007f716000-0x00000000821fffff] reserved
|
|
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
|
|
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
|
|
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
|
|
[ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
|
|
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
|
|
[ 0.000000] BIOS-e820: [mem 0x00000000ff430000-0x00000000ff46ffff] reserved
|
|
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000037ddfffff] usable
|
|
[ 0.000000] NX (Execute Disable) protection: active
|
|
[ 0.000000] efi: EFI v2.70 by EDK II
|
|
[ 0.000000] efi: ACPI 2.0=0x7f727000 SMBIOS=0x7f716000 MEMATTR=0x7d86b018
|
|
[ 0.000000] secureboot: Secure boot disabled
|
|
[ 0.000000] SMBIOS 3.0 present.
|
|
[ 0.000000] DMI: LENOVO 20AWS0VK00/20AWS0VK00, BIOS GLETA1WW (2.55) 03/03/2021
|
|
[ 0.000000] tsc: Fast TSC calibration using PIT
|
|
[ 0.000000] tsc: Detected 2893.299 MHz processor
|
|
[ 0.000010] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
|
|
[ 0.000011] e820: remove [mem 0x000a0000-0x000fffff] usable
|
|
[ 0.000016] last_pfn = 0x37de00 max_arch_pfn = 0x400000000
|
|
[ 0.000020] MTRR default type: uncachable
|
|
[ 0.000020] MTRR fixed ranges enabled:
|
|
[ 0.000021] 00000-9FFFF write-back
|
|
[ 0.000022] A0000-BFFFF uncachable
|
|
[ 0.000023] C0000-FFFFF write-back
|
|
[ 0.000023] MTRR variable ranges enabled:
|
|
[ 0.000024] 0 base 0000000000 mask 7F80000000 write-back
|
|
[ 0.000025] 1 base 0090000000 mask 7FF0000000 write-combining
|
|
[ 0.000026] 2 base 0100000000 mask 7F00000000 write-back
|
|
[ 0.000027] 3 base 0200000000 mask 7E00000000 write-back
|
|
[ 0.000027] 4 disabled
|
|
[ 0.000027] 5 disabled
|
|
[ 0.000028] 6 disabled
|
|
[ 0.000028] 7 disabled
|
|
[ 0.000029] 8 disabled
|
|
[ 0.000029] 9 disabled
|
|
[ 0.000459] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
|
|
[ 0.000625] last_pfn = 0x7f716 max_arch_pfn = 0x400000000
|
|
[ 0.006495] check: Scanning 1 areas for low memory corruption
|
|
[ 0.006498] Using GB pages for direct mapping
|
|
[ 0.006652] secureboot: Secure boot disabled
|
|
[ 0.006653] RAMDISK: [mem 0x3ad8c000-0x3fffdfff]
|
|
[ 0.006665] ACPI: Early table checksum verification disabled
|
|
[ 0.006668] ACPI: RSDP 0x000000007F727000 000024 (v02 COREv4)
|
|
[ 0.006670] ACPI: XSDT 0x000000007F3FDF18 000064 (v01 COREv4 COREBOOT 00000000 CORE 20200925)
|
|
[ 0.006674] ACPI: FACP 0x000000007F72A990 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200925)
|
|
[ 0.006678] ACPI: DSDT 0x000000007F727280 003710 (v02 COREv4 COREBOOT 20141018 INTL 20200925)
|
|
[ 0.006680] ACPI: FACS 0x000000007F727240 000040
|
|
[ 0.006681] ACPI: FACS 0x000000007F727240 000040
|
|
[ 0.006683] ACPI: SSDT 0x000000007F72AAB0 001BAD (v02 COREv4 COREBOOT 0000002A CORE 20200925)
|
|
[ 0.006685] ACPI: MCFG 0x000000007F72C660 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200925)
|
|
[ 0.006687] ACPI: TCPA 0x000000007F72C6A0 000032 (v02 COREv4 COREBOOT 00000000 CORE 20200925)
|
|
[ 0.006688] ACPI: APIC 0x000000007F72C6E0 00006C (v03 COREv4 COREBOOT 00000000 CORE 20200925)
|
|
[ 0.006690] ACPI: DMAR 0x000000007F72C750 0000C0 (v01 COREv4 COREBOOT 00000000 CORE 20200925)
|
|
[ 0.006692] ACPI: HPET 0x000000007F72C810 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200925)
|
|
[ 0.006694] ACPI: BGRT 0x000000007F3FD018 000038 (v00 INTEL EDK2 00001720 PTL 00000002)
|
|
[ 0.006700] ACPI: Local APIC address 0xfee00000
|
|
[ 0.006784] No NUMA configuration found
|
|
[ 0.006784] Faking a node at [mem 0x0000000000000000-0x000000037ddfffff]
|
|
[ 0.006791] NODE_DATA(0) allocated [mem 0x37ddd5000-0x37ddfffff]
|
|
[ 0.006954] Zone ranges:
|
|
[ 0.006955] DMA [mem 0x0000000000001000-0x0000000000ffffff]
|
|
[ 0.006956] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
|
|
[ 0.006956] Normal [mem 0x0000000100000000-0x000000037ddfffff]
|
|
[ 0.006957] Device empty
|
|
[ 0.006957] Movable zone start for each node
|
|
[ 0.006960] Early memory node ranges
|
|
[ 0.006960] node 0: [mem 0x0000000000001000-0x000000000009ffff]
|
|
[ 0.006961] node 0: [mem 0x0000000000100000-0x000000007d86bfff]
|
|
[ 0.006962] node 0: [mem 0x000000007d90b000-0x000000007f2adfff]
|
|
[ 0.006962] node 0: [mem 0x000000007f3f2000-0x000000007f3fcfff]
|
|
[ 0.006962] node 0: [mem 0x000000007f3fe000-0x000000007f715fff]
|
|
[ 0.006963] node 0: [mem 0x0000000100000000-0x000000037ddfffff]
|
|
[ 0.007054] Zeroed struct page in unavailable ranges: 11567 pages
|
|
[ 0.007056] Initmem setup node 0 [mem 0x0000000000001000-0x000000037ddfffff]
|
|
[ 0.007057] On node 0 totalpages: 3134161
|
|
[ 0.007057] DMA zone: 64 pages used for memmap
|
|
[ 0.007058] DMA zone: 1065 pages reserved
|
|
[ 0.007058] DMA zone: 3999 pages, LIFO batch:0
|
|
[ 0.007096] DMA32 zone: 8085 pages used for memmap
|
|
[ 0.007096] DMA32 zone: 517426 pages, LIFO batch:63
|
|
[ 0.013048] Normal zone: 40824 pages used for memmap
|
|
[ 0.013048] Normal zone: 2612736 pages, LIFO batch:63
|
|
[ 0.035465] Reserving Intel graphics memory at [mem 0x80200000-0x821fffff]
|
|
[ 0.035673] ACPI: PM-Timer IO Port: 0x508
|
|
[ 0.035674] ACPI: Local APIC address 0xfee00000
|
|
[ 0.035695] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
|
|
[ 0.035696] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
|
|
[ 0.035697] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
|
|
[ 0.035698] ACPI: IRQ0 used by override.
|
|
[ 0.035699] ACPI: IRQ9 used by override.
|
|
[ 0.035700] Using ACPI (MADT) for SMP configuration information
|
|
[ 0.035701] ACPI: HPET id: 0x8086a701 base: 0xfed00000
|
|
[ 0.035709] e820: update [mem 0x7d94b000-0x7d9bdfff] usable ==> reserved
|
|
[ 0.035714] TSC deadline timer available
|
|
[ 0.035715] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
|
|
[ 0.035728] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
|
|
[ 0.035729] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
|
|
[ 0.035730] PM: Registered nosave memory: [mem 0x7d86c000-0x7d90afff]
|
|
[ 0.035731] PM: Registered nosave memory: [mem 0x7d94b000-0x7d9bdfff]
|
|
[ 0.035732] PM: Registered nosave memory: [mem 0x7f2ae000-0x7f3f1fff]
|
|
[ 0.035732] PM: Registered nosave memory: [mem 0x7f3fd000-0x7f3fdfff]
|
|
[ 0.035733] PM: Registered nosave memory: [mem 0x7f716000-0x821fffff]
|
|
[ 0.035734] PM: Registered nosave memory: [mem 0x82200000-0xefffffff]
|
|
[ 0.035734] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
|
|
[ 0.035735] PM: Registered nosave memory: [mem 0xf4000000-0xfed0ffff]
|
|
[ 0.035735] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
|
|
[ 0.035735] PM: Registered nosave memory: [mem 0xfed1a000-0xfed3ffff]
|
|
[ 0.035736] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
|
|
[ 0.035736] PM: Registered nosave memory: [mem 0xfed45000-0xfed83fff]
|
|
[ 0.035736] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
|
|
[ 0.035737] PM: Registered nosave memory: [mem 0xfed85000-0xfed8ffff]
|
|
[ 0.035737] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
|
|
[ 0.035737] PM: Registered nosave memory: [mem 0xfed92000-0xff42ffff]
|
|
[ 0.035738] PM: Registered nosave memory: [mem 0xff430000-0xff46ffff]
|
|
[ 0.035738] PM: Registered nosave memory: [mem 0xff470000-0xffffffff]
|
|
[ 0.035739] [mem 0x82200000-0xefffffff] available for PCI devices
|
|
[ 0.035740] Booting paravirtualized kernel on bare hardware
|
|
[ 0.035742] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
|
|
[ 0.035747] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
|
|
[ 0.035911] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
|
|
[ 0.035917] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
|
|
[ 0.035917] pcpu-alloc: [0] 0 1 2 3
|
|
[ 0.035937] Built 1 zonelists, mobility grouping on. Total pages: 3084123
|
|
[ 0.035938] Policy zone: Normal
|
|
[ 0.035939] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/linuxmint.seed boot=casper iso-scan/filename= quiet splash --
|
|
[ 0.036787] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
|
|
[ 0.037161] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
|
|
[ 0.037196] mem auto-init: stack:off, heap alloc:on, heap free:off
|
|
[ 0.040205] Calgary: detecting Calgary via BIOS EBDA area
|
|
[ 0.040206] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
|
|
[ 0.067693] Memory: 12098340K/12536644K available (14339K kernel code, 2426K rwdata, 4932K rodata, 2720K init, 4956K bss, 438304K reserved, 0K cma-reserved)
|
|
[ 0.067698] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
|
|
[ 0.067794] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
|
|
[ 0.067803] Kernel/User page tables isolation: enabled
|
|
[ 0.067814] ftrace: allocating 44541 entries in 174 pages
|
|
[ 0.080054] rcu: Hierarchical RCU implementation.
|
|
[ 0.080055] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
|
|
[ 0.080056] Tasks RCU enabled.
|
|
[ 0.080056] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
|
|
[ 0.080057] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
|
|
[ 0.082034] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
|
|
[ 0.082301] random: crng done (trusting CPU's manufacturer)
|
|
[ 0.082318] Console: colour dummy device 80x25
|
|
[ 0.082321] printk: console [tty0] enabled
|
|
[ 0.082335] ACPI: Core revision 20190816
|
|
[ 0.082396] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
|
|
[ 0.082428] APIC: Switch to symmetric I/O mode setup
|
|
[ 0.082430] DMAR: Host address width 39
|
|
[ 0.082430] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
|
|
[ 0.082434] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
|
|
[ 0.082434] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
|
|
[ 0.082436] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
|
|
[ 0.082437] DMAR: RMRR base: 0x00000080000000 end: 0x000000821fffff
|
|
[ 0.082438] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
|
|
[ 0.082439] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
|
|
[ 0.082439] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
|
|
[ 0.082854] DMAR-IR: Enabled IRQ remapping in x2apic mode
|
|
[ 0.082854] x2apic enabled
|
|
[ 0.082862] Switched APIC routing to cluster x2apic.
|
|
[ 0.083318] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
|
|
[ 0.102413] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b4889c8c0, max_idle_ns: 440795211360 ns
|
|
[ 0.102417] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.59 BogoMIPS (lpj=11573196)
|
|
[ 0.102418] pid_max: default: 32768 minimum: 301
|
|
[ 0.103284] LSM: Security Framework initializing
|
|
[ 0.103292] Yama: becoming mindful.
|
|
[ 0.103314] AppArmor: AppArmor initialized
|
|
[ 0.103362] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
|
|
[ 0.103390] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
|
|
[ 0.103400] *** VALIDATE tmpfs ***
|
|
[ 0.103500] *** VALIDATE proc ***
|
|
[ 0.103539] *** VALIDATE cgroup1 ***
|
|
[ 0.103540] *** VALIDATE cgroup2 ***
|
|
[ 0.103582] mce: CPU0: Thermal monitoring enabled (TM1)
|
|
[ 0.103590] process: using mwait in idle threads
|
|
[ 0.103592] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
|
|
[ 0.103593] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
|
|
[ 0.103595] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
|
|
[ 0.103596] Spectre V2 : Mitigation: Full generic retpoline
|
|
[ 0.103596] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
|
|
[ 0.103596] Spectre V2 : Enabling Restricted Speculation for firmware calls
|
|
[ 0.103597] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
|
|
[ 0.103598] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
|
|
[ 0.103599] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
|
|
[ 0.103602] SRBDS: Mitigation: Microcode
|
|
[ 0.103602] MDS: Mitigation: Clear CPU buffers
|
|
[ 0.103738] Freeing SMP alternatives memory: 40K
|
|
[ 0.105341] smpboot: CPU0: Intel(R) Core(TM) i7-4600M CPU @ 2.90GHz (family: 0x6, model: 0x3c, stepping: 0x3)
|
|
[ 0.105427] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
|
|
[ 0.105439] ... version: 3
|
|
[ 0.105439] ... bit width: 48
|
|
[ 0.105439] ... generic registers: 4
|
|
[ 0.105440] ... value mask: 0000ffffffffffff
|
|
[ 0.105440] ... max period: 00007fffffffffff
|
|
[ 0.105441] ... fixed-purpose events: 3
|
|
[ 0.105441] ... event mask: 000000070000000f
|
|
[ 0.105465] rcu: Hierarchical SRCU implementation.
|
|
[ 0.106083] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
|
|
[ 0.106121] smp: Bringing up secondary CPUs ...
|
|
[ 0.106181] x86: Booting SMP configuration:
|
|
[ 0.106182] .... node #0, CPUs: #1
|
|
[ 0.106415] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
|
|
[ 0.106415] #2 #3
|
|
[ 0.106415] smp: Brought up 1 node, 4 CPUs
|
|
[ 0.106415] smpboot: Max logical packages: 1
|
|
[ 0.106415] smpboot: Total of 4 processors activated (23146.39 BogoMIPS)
|
|
[ 0.106758] devtmpfs: initialized
|
|
[ 0.106758] x86/mm: Memory block size: 128MB
|
|
[ 0.107238] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
|
|
[ 0.107238] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
|
|
[ 0.107238] pinctrl core: initialized pinctrl subsystem
|
|
[ 0.107238] PM: RTC time: 16:18:22, date: 2021-03-04
|
|
[ 0.107238] NET: Registered protocol family 16
|
|
[ 0.107238] audit: initializing netlink subsys (disabled)
|
|
[ 0.107238] audit: type=2000 audit(1614874702.028:1): state=initialized audit_enabled=0 res=1
|
|
[ 0.107238] EISA bus registered
|
|
[ 0.107238] cpuidle: using governor ladder
|
|
[ 0.107238] cpuidle: using governor menu
|
|
[ 0.107238] ACPI: bus type PCI registered
|
|
[ 0.107238] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
|
|
[ 0.107238] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
|
|
[ 0.107238] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
|
|
[ 0.107238] PCI: Using configuration type 1 for base access
|
|
[ 0.107238] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
|
|
[ 0.107425] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
|
|
[ 0.107425] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
|
|
[ 0.110476] ACPI: Added _OSI(Module Device)
|
|
[ 0.110476] ACPI: Added _OSI(Processor Device)
|
|
[ 0.110476] ACPI: Added _OSI(3.0 _SCP Extensions)
|
|
[ 0.110476] ACPI: Added _OSI(Processor Aggregator Device)
|
|
[ 0.110476] ACPI: Added _OSI(Linux-Dell-Video)
|
|
[ 0.110476] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
|
|
[ 0.110476] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
|
|
[ 0.112971] ACPI: 2 ACPI AML tables successfully acquired and loaded
|
|
[ 0.112971] ACPI: EC: EC started
|
|
[ 0.112971] ACPI: EC: interrupt blocked
|
|
[ 0.112971] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
|
|
[ 0.112971] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
|
|
[ 0.112971] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
|
|
[ 0.112971] ACPI: Interpreter enabled
|
|
[ 0.112971] ACPI: (supports S0 S3 S4 S5)
|
|
[ 0.112971] ACPI: Using IOAPIC for interrupt routing
|
|
[ 0.112971] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
|
|
[ 0.114703] ACPI: Power Resource [FPWR] (off)
|
|
[ 0.114884] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
|
|
[ 0.114888] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
|
|
[ 0.114921] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
|
|
[ 0.114928] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
|
|
[ 0.115122] PCI host bridge to bus 0000:00
|
|
[ 0.115124] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
|
|
[ 0.115125] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
|
|
[ 0.115125] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
|
|
[ 0.115126] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
|
|
[ 0.115127] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
|
|
[ 0.115127] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
|
|
[ 0.115128] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
|
|
[ 0.115129] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
|
|
[ 0.115129] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
|
|
[ 0.115130] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
|
|
[ 0.115130] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
|
|
[ 0.115131] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
|
|
[ 0.115132] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
|
|
[ 0.115132] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
|
|
[ 0.115133] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
|
|
[ 0.115134] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
|
|
[ 0.115134] pci_bus 0000:00: root bus resource [mem 0x82200000-0xefffffff window]
|
|
[ 0.115135] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
|
|
[ 0.115136] pci_bus 0000:00: root bus resource [bus 00-ff]
|
|
[ 0.115142] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
|
|
[ 0.115229] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
|
|
[ 0.115237] pci 0000:00:02.0: reg 0x10: [mem 0x82400000-0x827fffff 64bit]
|
|
[ 0.115241] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
|
|
[ 0.115244] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f]
|
|
[ 0.115252] pci 0000:00:02.0: BAR 2: assigned to efifb
|
|
[ 0.115307] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
|
|
[ 0.115314] pci 0000:00:03.0: reg 0x10: [mem 0x82838000-0x8283bfff 64bit]
|
|
[ 0.115373] pci 0000:00:04.0: [8086:0c03] type 00 class 0x118000
|
|
[ 0.115381] pci 0000:00:04.0: reg 0x10: [mem 0x82830000-0x82837fff 64bit]
|
|
[ 0.115470] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
|
|
[ 0.115493] pci 0000:00:14.0: reg 0x10: [mem 0x82820000-0x8282ffff 64bit]
|
|
[ 0.115559] pci 0000:00:14.0: PME# supported from D3hot D3cold
|
|
[ 0.115654] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
|
|
[ 0.118419] pci 0000:00:16.0: reg 0x10: [mem 0x82845000-0x8284500f 64bit]
|
|
[ 0.118419] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
|
|
[ 0.118419] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
|
|
[ 0.118419] pci 0000:00:19.0: reg 0x10: [mem 0x82800000-0x8281ffff]
|
|
[ 0.118419] pci 0000:00:19.0: reg 0x14: [mem 0x82840000-0x82840fff]
|
|
[ 0.118419] pci 0000:00:19.0: reg 0x18: [io 0x1040-0x105f]
|
|
[ 0.118419] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
|
|
[ 0.118419] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
|
|
[ 0.118419] pci 0000:00:1a.0: reg 0x10: [mem 0x82842000-0x828423ff]
|
|
[ 0.118419] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
|
|
[ 0.118419] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
|
|
[ 0.118419] pci 0000:00:1b.0: reg 0x10: [mem 0x8283c000-0x8283ffff 64bit]
|
|
[ 0.118419] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
|
|
[ 0.118419] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
|
|
[ 0.118419] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
|
|
[ 0.118419] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
|
|
[ 0.118419] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
|
|
[ 0.118419] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
|
|
[ 0.118419] pci 0000:00:1d.0: reg 0x10: [mem 0x82843000-0x828433ff]
|
|
[ 0.118419] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
|
|
[ 0.118419] pci 0000:00:1f.0: [8086:8c4f] type 00 class 0x060100
|
|
[ 0.118419] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
|
|
[ 0.118419] pci 0000:00:1f.2: reg 0x10: [io 0x1080-0x1087]
|
|
[ 0.118419] pci 0000:00:1f.2: reg 0x14: [io 0x1090-0x1093]
|
|
[ 0.118419] pci 0000:00:1f.2: reg 0x18: [io 0x1088-0x108f]
|
|
[ 0.118419] pci 0000:00:1f.2: reg 0x1c: [io 0x1094-0x1097]
|
|
[ 0.118419] pci 0000:00:1f.2: reg 0x20: [io 0x1060-0x107f]
|
|
[ 0.118419] pci 0000:00:1f.2: reg 0x24: [mem 0x82841000-0x828417ff]
|
|
[ 0.118419] pci 0000:00:1f.2: PME# supported from D3hot
|
|
[ 0.118440] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
|
|
[ 0.118461] pci 0000:00:1f.3: reg 0x10: [mem 0x82844000-0x828440ff 64bit]
|
|
[ 0.118483] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
|
|
[ 0.118693] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
|
|
[ 0.118806] pci 0000:02:00.0: reg 0x10: [mem 0x82200000-0x82200fff]
|
|
[ 0.119351] pci 0000:02:00.0: supports D1 D2
|
|
[ 0.119352] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
|
|
[ 0.119640] pci 0000:00:1c.0: PCI bridge to [bus 02]
|
|
[ 0.119646] pci 0000:00:1c.0: bridge window [mem 0x82200000-0x822fffff]
|
|
[ 0.119734] pci 0000:03:00.0: [8086:095b] type 00 class 0x028000
|
|
[ 0.119813] pci 0000:03:00.0: reg 0x10: [mem 0x82300000-0x82301fff 64bit]
|
|
[ 0.120071] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
|
|
[ 0.120288] pci 0000:00:1c.1: PCI bridge to [bus 03]
|
|
[ 0.120293] pci 0000:00:1c.1: bridge window [mem 0x82300000-0x823fffff]
|
|
[ 0.120465] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
|
|
[ 0.120523] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
|
|
[ 0.120581] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
|
|
[ 0.120632] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
|
|
[ 0.120688] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
|
|
[ 0.120745] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
|
|
[ 0.120801] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
|
|
[ 0.120852] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
|
|
[ 0.122422] ACPI: EC: interrupt unblocked
|
|
[ 0.122422] ACPI: EC: event unblocked
|
|
[ 0.122422] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
|
|
[ 0.122422] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events
|
|
[ 0.122461] iommu: Default domain type: Translated
|
|
[ 0.122548] SCSI subsystem initialized
|
|
[ 0.122557] libata version 3.00 loaded.
|
|
[ 0.122557] pci 0000:00:02.0: vgaarb: setting as boot VGA device
|
|
[ 0.122557] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
|
|
[ 0.122557] pci 0000:00:02.0: vgaarb: bridge control possible
|
|
[ 0.122557] vgaarb: loaded
|
|
[ 0.122557] ACPI: bus type USB registered
|
|
[ 0.122557] usbcore: registered new interface driver usbfs
|
|
[ 0.122557] usbcore: registered new interface driver hub
|
|
[ 0.122557] usbcore: registered new device driver usb
|
|
[ 0.122557] pps_core: LinuxPPS API ver. 1 registered
|
|
[ 0.122557] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
|
|
[ 0.122557] PTP clock support registered
|
|
[ 0.122557] EDAC MC: Ver: 3.0.0
|
|
[ 0.122557] Registered efivars operations
|
|
[ 0.122557] PCI: Using ACPI for IRQ routing
|
|
[ 0.124299] PCI: pci_cache_line_size set to 64 bytes
|
|
[ 0.124426] e820: reserve RAM buffer [mem 0x7d86c000-0x7fffffff]
|
|
[ 0.124427] e820: reserve RAM buffer [mem 0x7d94b000-0x7fffffff]
|
|
[ 0.124428] e820: reserve RAM buffer [mem 0x7f2ae000-0x7fffffff]
|
|
[ 0.124428] e820: reserve RAM buffer [mem 0x7f3fd000-0x7fffffff]
|
|
[ 0.124429] e820: reserve RAM buffer [mem 0x7f716000-0x7fffffff]
|
|
[ 0.124429] e820: reserve RAM buffer [mem 0x37de00000-0x37fffffff]
|
|
[ 0.124497] NetLabel: Initializing
|
|
[ 0.124497] NetLabel: domain hash size = 128
|
|
[ 0.124498] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
|
|
[ 0.124508] NetLabel: unlabeled traffic allowed by default
|
|
[ 0.126530] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
|
|
[ 0.126533] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
|
|
[ 0.128551] clocksource: Switched to clocksource tsc-early
|
|
[ 0.135386] *** VALIDATE bpf ***
|
|
[ 0.135451] VFS: Disk quotas dquot_6.6.0
|
|
[ 0.135464] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
|
|
[ 0.135485] *** VALIDATE ramfs ***
|
|
[ 0.135488] *** VALIDATE hugetlbfs ***
|
|
[ 0.135549] AppArmor: AppArmor Filesystem Enabled
|
|
[ 0.135571] pnp: PnP ACPI init
|
|
[ 0.135654] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
|
|
[ 0.135655] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
|
|
[ 0.135656] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
|
|
[ 0.135657] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
|
|
[ 0.135658] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
|
|
[ 0.135659] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
|
|
[ 0.135660] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
|
|
[ 0.135661] system 00:00: [mem 0xfed45000-0xfed8ffff] could not be reserved
|
|
[ 0.135664] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
|
|
[ 0.136139] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
|
|
[ 0.136142] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
|
|
[ 0.136175] system 00:02: [io 0x0500-0x05fe] has been reserved
|
|
[ 0.136176] system 00:02: [io 0x0480-0x04bf] has been reserved
|
|
[ 0.136178] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
|
|
[ 0.136191] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
|
|
[ 0.136211] pnp 00:04: Plug and Play ACPI device, IDs LEN0071 PNP030b (active)
|
|
[ 0.136228] pnp 00:05: Plug and Play ACPI device, IDs LEN0036 PNP0f13 (active)
|
|
[ 0.136246] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
|
|
[ 0.136259] pnp: PnP ACPI: found 7 devices
|
|
[ 0.137072] thermal_sys: Registered thermal governor 'fair_share'
|
|
[ 0.137073] thermal_sys: Registered thermal governor 'bang_bang'
|
|
[ 0.137073] thermal_sys: Registered thermal governor 'step_wise'
|
|
[ 0.137074] thermal_sys: Registered thermal governor 'user_space'
|
|
[ 0.137074] thermal_sys: Registered thermal governor 'power_allocator'
|
|
[ 0.141620] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
|
|
[ 0.141646] pci 0000:00:1c.0: PCI bridge to [bus 02]
|
|
[ 0.141657] pci 0000:00:1c.0: bridge window [mem 0x82200000-0x822fffff]
|
|
[ 0.141665] pci 0000:00:1c.1: PCI bridge to [bus 03]
|
|
[ 0.141669] pci 0000:00:1c.1: bridge window [mem 0x82300000-0x823fffff]
|
|
[ 0.141677] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
|
|
[ 0.141678] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
|
|
[ 0.141679] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
|
|
[ 0.141680] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
|
|
[ 0.141680] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
|
|
[ 0.141681] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
|
|
[ 0.141682] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
|
|
[ 0.141682] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
|
|
[ 0.141683] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
|
|
[ 0.141684] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
|
|
[ 0.141685] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
|
|
[ 0.141685] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
|
|
[ 0.141686] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
|
|
[ 0.141687] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
|
|
[ 0.141687] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
|
|
[ 0.141688] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
|
|
[ 0.141689] pci_bus 0000:00: resource 20 [mem 0x82200000-0xefffffff window]
|
|
[ 0.141690] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
|
|
[ 0.141691] pci_bus 0000:02: resource 1 [mem 0x82200000-0x822fffff]
|
|
[ 0.141691] pci_bus 0000:03: resource 1 [mem 0x82300000-0x823fffff]
|
|
[ 0.141757] NET: Registered protocol family 2
|
|
[ 0.141874] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
|
|
[ 0.141938] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
|
|
[ 0.142096] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
|
|
[ 0.142198] TCP: Hash tables configured (established 131072 bind 65536)
|
|
[ 0.142231] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
|
|
[ 0.142263] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
|
|
[ 0.142309] NET: Registered protocol family 1
|
|
[ 0.142312] NET: Registered protocol family 44
|
|
[ 0.142319] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
|
|
[ 0.142907] PCI: CLS 64 bytes, default 64
|
|
[ 0.142935] Trying to unpack rootfs image as initramfs...
|
|
[ 0.300937] Freeing initrd memory: 84424K
|
|
[ 0.314514] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
|
|
[ 0.314516] software IO TLB: mapped [mem 0x77710000-0x7b710000] (64MB)
|
|
[ 0.314697] check: Scanning for low memory corruption every 60 seconds
|
|
[ 0.315037] Initialise system trusted keyrings
|
|
[ 0.315044] Key type blacklist registered
|
|
[ 0.315072] workingset: timestamp_bits=36 max_order=22 bucket_order=0
|
|
[ 0.316048] zbud: loaded
|
|
[ 0.316308] squashfs: version 4.0 (2009/01/31) Phillip Lougher
|
|
[ 0.316429] fuse: init (API version 7.31)
|
|
[ 0.316440] *** VALIDATE fuse ***
|
|
[ 0.316441] *** VALIDATE fuse ***
|
|
[ 0.316504] Platform Keyring initialized
|
|
[ 0.319368] Key type asymmetric registered
|
|
[ 0.319369] Asymmetric key parser 'x509' registered
|
|
[ 0.319374] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
|
|
[ 0.319401] io scheduler mq-deadline registered
|
|
[ 0.319665] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26
|
|
[ 0.319725] pcieport 0000:00:1c.0: AER: enabled with IRQ 26
|
|
[ 0.319916] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27
|
|
[ 0.319969] pcieport 0000:00:1c.1: AER: enabled with IRQ 27
|
|
[ 0.320032] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
|
|
[ 0.320070] efifb: probing for efifb
|
|
[ 0.320092] efifb: showing boot graphics
|
|
[ 0.320874] efifb: framebuffer at 0x90000000, using 8100k, total 8100k
|
|
[ 0.320875] efifb: mode is 1920x1080x32, linelength=7680, pages=1
|
|
[ 0.320876] efifb: scrolling: redraw
|
|
[ 0.320877] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
|
|
[ 0.320904] fbcon: Deferring console take-over
|
|
[ 0.320905] fb0: EFI VGA frame buffer device
|
|
[ 0.320910] intel_idle: MWAIT substates: 0x42120
|
|
[ 0.320910] intel_idle: v0.4.1 model 0x3C
|
|
[ 0.321042] intel_idle: lapic_timer_reliable_states 0xffffffff
|
|
[ 0.321257] ACPI: AC Adapter [AC] (on-line)
|
|
[ 0.321299] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2d/PNP0C09:00/PNP0C0E:00/input/input0
|
|
[ 0.321322] ACPI: Sleep Button [SLPB]
|
|
[ 0.321342] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2d/PNP0C09:00/PNP0C0D:00/input/input1
|
|
[ 0.321355] ACPI: Lid Switch [LID]
|
|
[ 0.321377] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
|
|
[ 0.321390] ACPI: Power Button [PWRF]
|
|
[ 0.322978] thermal LNXTHERM:00: registered as thermal_zone0
|
|
[ 0.322979] ACPI: Thermal Zone [THM0] (58 C)
|
|
[ 0.323670] thermal LNXTHERM:01: registered as thermal_zone1
|
|
[ 0.323671] ACPI: Thermal Zone [THM1] (27 C)
|
|
[ 0.323772] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
|
|
[ 0.323845] battery: ACPI: Battery Slot [BAT0] (battery absent)
|
|
[ 0.323989] battery: ACPI: Battery Slot [BAT1] (battery absent)
|
|
[ 0.324880] Linux agpgart interface v0.103
|
|
[ 0.330509] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
|
|
[ 0.390511] tpm tpm0: TPM is disabled/deactivated (0x6)
|
|
[ 0.400481] loop: module loaded
|
|
[ 0.400668] libphy: Fixed MDIO Bus: probed
|
|
[ 0.400668] tun: Universal TUN/TAP device driver, 1.6
|
|
[ 0.400706] PPP generic driver version 2.4.2
|
|
[ 0.400761] VFIO - User Level meta-driver version: 0.3
|
|
[ 0.400818] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
|
|
[ 0.400820] ehci-pci: EHCI PCI platform driver
|
|
[ 0.400964] ehci-pci 0000:00:1a.0: EHCI Host Controller
|
|
[ 0.400968] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
|
|
[ 0.400983] ehci-pci 0000:00:1a.0: debug port 2
|
|
[ 0.404884] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
|
|
[ 0.404896] ehci-pci 0000:00:1a.0: irq 16, io mem 0x82842000
|
|
[ 0.418485] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
|
|
[ 0.418539] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
|
|
[ 0.418540] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
|
[ 0.418542] usb usb1: Product: EHCI Host Controller
|
|
[ 0.418542] usb usb1: Manufacturer: Linux 5.4.0-58-generic ehci_hcd
|
|
[ 0.418543] usb usb1: SerialNumber: 0000:00:1a.0
|
|
[ 0.418715] hub 1-0:1.0: USB hub found
|
|
[ 0.418719] hub 1-0:1.0: 2 ports detected
|
|
[ 0.418964] ehci-pci 0000:00:1d.0: EHCI Host Controller
|
|
[ 0.418968] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
|
|
[ 0.418982] ehci-pci 0000:00:1d.0: debug port 2
|
|
[ 0.422888] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
|
|
[ 0.422899] ehci-pci 0000:00:1d.0: irq 23, io mem 0x82843000
|
|
[ 0.438484] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
|
|
[ 0.438532] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
|
|
[ 0.438533] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
|
[ 0.438535] usb usb2: Product: EHCI Host Controller
|
|
[ 0.438535] usb usb2: Manufacturer: Linux 5.4.0-58-generic ehci_hcd
|
|
[ 0.438536] usb usb2: SerialNumber: 0000:00:1d.0
|
|
[ 0.438718] hub 2-0:1.0: USB hub found
|
|
[ 0.438723] hub 2-0:1.0: 2 ports detected
|
|
[ 0.438828] ehci-platform: EHCI generic platform driver
|
|
[ 0.438843] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
|
|
[ 0.438846] ohci-pci: OHCI PCI platform driver
|
|
[ 0.438855] ohci-platform: OHCI generic platform driver
|
|
[ 0.438860] uhci_hcd: USB Universal Host Controller Interface driver
|
|
[ 0.439021] xhci_hcd 0000:00:14.0: xHCI Host Controller
|
|
[ 0.439026] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
|
|
[ 0.440100] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
|
|
[ 0.440105] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
|
|
[ 0.440267] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
|
|
[ 0.440268] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
|
[ 0.440269] usb usb3: Product: xHCI Host Controller
|
|
[ 0.440270] usb usb3: Manufacturer: Linux 5.4.0-58-generic xhci-hcd
|
|
[ 0.440279] usb usb3: SerialNumber: 0000:00:14.0
|
|
[ 0.440431] hub 3-0:1.0: USB hub found
|
|
[ 0.440456] hub 3-0:1.0: 15 ports detected
|
|
[ 0.440730] xhci_hcd 0000:00:14.0: xHCI Host Controller
|
|
[ 0.440732] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
|
|
[ 0.440734] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
|
|
[ 0.440763] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
|
|
[ 0.440763] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
|
[ 0.440764] usb usb4: Product: xHCI Host Controller
|
|
[ 0.440765] usb usb4: Manufacturer: Linux 5.4.0-58-generic xhci-hcd
|
|
[ 0.440765] usb usb4: SerialNumber: 0000:00:14.0
|
|
[ 0.440911] hub 4-0:1.0: USB hub found
|
|
[ 0.440928] hub 4-0:1.0: 6 ports detected
|
|
[ 0.441150] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
|
|
[ 0.443334] serio: i8042 KBD port at 0x60,0x64 irq 1
|
|
[ 0.443337] serio: i8042 AUX port at 0x60,0x64 irq 12
|
|
[ 0.443574] mousedev: PS/2 mouse device common for all mice
|
|
[ 0.443898] rtc_cmos 00:03: RTC can wake from S4
|
|
[ 0.444105] rtc_cmos 00:03: registered as rtc0
|
|
[ 0.444115] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
|
|
[ 0.444118] i2c /dev entries driver
|
|
[ 0.444160] device-mapper: uevent: version 1.0.3
|
|
[ 0.444195] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
|
|
[ 0.444206] platform eisa.0: Probing EISA bus 0
|
|
[ 0.444207] platform eisa.0: EISA: Cannot allocate resource for mainboard
|
|
[ 0.444208] platform eisa.0: Cannot allocate resource for EISA slot 1
|
|
[ 0.444208] platform eisa.0: Cannot allocate resource for EISA slot 2
|
|
[ 0.444209] platform eisa.0: Cannot allocate resource for EISA slot 3
|
|
[ 0.444210] platform eisa.0: Cannot allocate resource for EISA slot 4
|
|
[ 0.444210] platform eisa.0: Cannot allocate resource for EISA slot 5
|
|
[ 0.444211] platform eisa.0: Cannot allocate resource for EISA slot 6
|
|
[ 0.444211] platform eisa.0: Cannot allocate resource for EISA slot 7
|
|
[ 0.444212] platform eisa.0: Cannot allocate resource for EISA slot 8
|
|
[ 0.444213] platform eisa.0: EISA: Detected 0 cards
|
|
[ 0.444216] intel_pstate: Intel P-state driver initializing
|
|
[ 0.444379] ledtrig-cpu: registered to indicate activity on CPUs
|
|
[ 0.444381] EFI Variables Facility v0.08 2004-May-17
|
|
[ 0.444730] drop_monitor: Initializing network drop monitor service
|
|
[ 0.444873] NET: Registered protocol family 10
|
|
[ 0.445025] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
|
|
[ 0.449328] Segment Routing with IPv6
|
|
[ 0.449342] NET: Registered protocol family 17
|
|
[ 0.449370] Key type dns_resolver registered
|
|
[ 0.449519] RAS: Correctable Errors collector initialized.
|
|
[ 0.449541] microcode: sig=0x306c3, pf=0x10, revision=0x28
|
|
[ 0.449565] microcode: Microcode Update Driver: v2.2.
|
|
[ 0.449568] IPI shorthand broadcast: enabled
|
|
[ 0.449573] sched_clock: Marking stable (453363334, -3800176)->(455430918, -5867760)
|
|
[ 0.449619] registered taskstats version 1
|
|
[ 0.449626] Loading compiled-in X.509 certificates
|
|
[ 0.450173] Loaded X.509 cert 'Build time autogenerated kernel key: 6b3d3d266049f4a4077ed3557f79f9ce7832433a'
|
|
[ 0.450192] zswap: loaded using pool lzo/zbud
|
|
[ 0.450235] Key type ._fscrypt registered
|
|
[ 0.450236] Key type .fscrypt registered
|
|
[ 0.453987] Key type big_key registered
|
|
[ 0.453990] Key type trusted registered
|
|
[ 0.455794] Key type encrypted registered
|
|
[ 0.455796] AppArmor: AppArmor sha1 policy hashing enabled
|
|
[ 0.455850] ima: Allocated hash algorithm: sha1
|
|
[ 0.466511] ima: Error Communicating to TPM chip
|
|
[ 0.466520] fbcon: Taking over console
|
|
[ 0.466615] Console: switching to colour frame buffer device 240x67
|
|
[ 0.474528] ima: Error Communicating to TPM chip
|
|
[ 0.482517] ima: Error Communicating to TPM chip
|
|
[ 0.490516] ima: Error Communicating to TPM chip
|
|
[ 0.498517] ima: Error Communicating to TPM chip
|
|
[ 0.506516] ima: Error Communicating to TPM chip
|
|
[ 0.514514] ima: Error Communicating to TPM chip
|
|
[ 0.522521] ima: Error Communicating to TPM chip
|
|
[ 0.534556] ima: No architecture policies found
|
|
[ 0.534570] evm: Initialising EVM extended attributes:
|
|
[ 0.534571] evm: security.selinux
|
|
[ 0.534571] evm: security.SMACK64
|
|
[ 0.534572] evm: security.SMACK64EXEC
|
|
[ 0.534572] evm: security.SMACK64TRANSMUTE
|
|
[ 0.534572] evm: security.SMACK64MMAP
|
|
[ 0.534573] evm: security.apparmor
|
|
[ 0.534573] evm: security.ima
|
|
[ 0.534574] evm: security.capability
|
|
[ 0.534574] evm: HMAC attrs: 0x1
|
|
[ 0.534937] PM: Magic number: 13:249:337
|
|
[ 0.534981] thermal thermal_zone0: hash matches
|
|
[ 0.534989] tty tty58: hash matches
|
|
[ 0.535085] rtc_cmos 00:03: setting system clock to 2021-03-04T16:18:22 UTC (1614874702)
|
|
[ 0.536000] Freeing unused decrypted memory: 2040K
|
|
[ 0.536312] Freeing unused kernel image memory: 2720K
|
|
[ 0.536347] Write protecting the kernel read-only data: 22528k
|
|
[ 0.536659] Freeing unused kernel image memory: 2008K
|
|
[ 0.536820] Freeing unused kernel image memory: 1212K
|
|
[ 0.543782] x86/mm: Checked W+X mappings: passed, no W+X pages found.
|
|
[ 0.543783] x86/mm: Checking user space page tables
|
|
[ 0.550595] x86/mm: Checked W+X mappings: passed, no W+X pages found.
|
|
[ 0.550596] Run /init as init process
|
|
[ 0.620646] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
|
|
[ 0.620647] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
|
|
[ 0.620846] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
|
|
[ 0.623463] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
|
|
[ 0.634916] ahci 0000:00:1f.2: version 3.0
|
|
[ 0.635166] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
|
|
[ 0.635198] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x23 impl SATA mode
|
|
[ 0.635200] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part apst
|
|
[ 0.637736] cryptd: max_cpu_qlen set to 1000
|
|
[ 0.642451] scsi host0: ahci
|
|
[ 0.643892] AVX2 version of gcm_enc/dec engaged.
|
|
[ 0.643892] AES CTR mode by8 optimization enabled
|
|
[ 0.648861] scsi host1: ahci
|
|
[ 0.650860] scsi host2: ahci
|
|
[ 0.650950] scsi host3: ahci
|
|
[ 0.654235] scsi host4: ahci
|
|
[ 0.657983] scsi host5: ahci
|
|
[ 0.658052] ata1: SATA max UDMA/133 abar m2048@0x82841000 port 0x82841100 irq 31
|
|
[ 0.658055] ata2: SATA max UDMA/133 abar m2048@0x82841000 port 0x82841180 irq 31
|
|
[ 0.658056] ata3: DUMMY
|
|
[ 0.658056] ata4: DUMMY
|
|
[ 0.658057] ata5: DUMMY
|
|
[ 0.658060] ata6: SATA max UDMA/133 abar m2048@0x82841000 port 0x82841380 irq 31
|
|
[ 0.679336] gpio_ich gpio_ich.2.auto: GPIO from 436 to 511
|
|
[ 0.682359] checking generic (90000000 7e9000) vs hw (90000000 10000000)
|
|
[ 0.682360] fb0: switching to inteldrmfb from EFI VGA
|
|
[ 0.682409] Console: switching to colour dummy device 80x25
|
|
[ 0.682498] i915 0000:00:02.0: vgaarb: deactivate vga console
|
|
[ 0.711473] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
|
|
[ 0.734475] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
|
|
[ 0.734476] [drm] Driver supports precise vblank timestamp query.
|
|
[ 0.734509] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
|
|
[ 0.754427] usb 1-1: new high-speed USB device number 2 using ehci-pci
|
|
[ 0.770896] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] Panel advertises DPCD backlight support, but VBT disagrees. If your backlight controls don't work try booting with i915.enable_dpcd_backlight=1. If your machine needs this, please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
|
|
[ 0.774466] usb 3-6: new high-speed USB device number 2 using xhci_hcd
|
|
[ 0.778348] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
|
|
[ 0.778430] usb 2-1: new high-speed USB device number 2 using ehci-pci
|
|
[ 0.778571] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
|
|
[ 0.790753] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 28:d2:44:6b:c0:73
|
|
[ 0.790755] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
|
|
[ 0.790805] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
|
|
[ 0.791690] e1000e 0000:00:19.0 eno0: renamed from eth0
|
|
[ 0.802537] acpi device:0b: registered as cooling_device5
|
|
[ 0.802573] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
|
|
[ 0.910814] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05
|
|
[ 0.910816] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
|
|
[ 0.910975] hub 1-1:1.0: USB hub found
|
|
[ 0.911063] hub 1-1:1.0: 6 ports detected
|
|
[ 0.923745] usb 3-6: New USB device found, idVendor=03f0, idProduct=3307, bcdDevice=11.00
|
|
[ 0.923747] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
|
|
[ 0.923748] usb 3-6: Product: v125w
|
|
[ 0.923748] usb 3-6: Manufacturer: HP
|
|
[ 0.923749] usb 3-6: SerialNumber: AA66060027NT4X
|
|
[ 0.926661] usb-storage 3-6:1.0: USB Mass Storage device detected
|
|
[ 0.926785] scsi host6: usb-storage 3-6:1.0
|
|
[ 0.926848] usbcore: registered new interface driver usb-storage
|
|
[ 0.927806] usbcore: registered new interface driver uas
|
|
[ 0.938854] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
|
|
[ 0.938856] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
|
|
[ 0.939102] hub 2-1:1.0: USB hub found
|
|
[ 0.939204] hub 2-1:1.0: 8 ports detected
|
|
[ 0.974503] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
|
|
[ 0.976460] ata1.00: supports DRM functions and may not be fully accessible
|
|
[ 0.976908] ata1.00: NCQ Send/Recv Log not supported
|
|
[ 0.976910] ata1.00: ATA-9: SAMSUNG MZ7TE256HMHP-000L7, EXT0AL6Q, max UDMA/133
|
|
[ 0.976912] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA
|
|
[ 0.977729] ata1.00: supports DRM functions and may not be fully accessible
|
|
[ 0.978100] ata1.00: NCQ Send/Recv Log not supported
|
|
[ 0.978661] ata1.00: configured for UDMA/133
|
|
[ 0.978806] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7TE256 AL6Q PQ: 0 ANSI: 5
|
|
[ 0.979047] scsi 0:0:0:0: Attached scsi generic sg0 type 0
|
|
[ 0.979162] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
|
|
[ 0.979171] sd 0:0:0:0: [sda] Write Protect is off
|
|
[ 0.979173] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
|
|
[ 0.979188] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
|
|
[ 0.996808] sda: sda1 sda2 sda3 sda4
|
|
[ 0.997645] sd 0:0:0:0: [sda] supports TCG Opal
|
|
[ 0.997646] sd 0:0:0:0: [sda] Attached SCSI disk
|
|
[ 1.038588] fbcon: i915drmfb (fb0) is primary device
|
|
[ 1.050498] usb 3-11: new full-speed USB device number 3 using xhci_hcd
|
|
[ 1.200266] usb 3-11: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
|
|
[ 1.200268] usb 3-11: New USB device strings: Mfr=0, Product=0, SerialNumber=0
|
|
[ 1.297740] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
|
|
[ 1.326493] tsc: Refined TSC clocksource calibration: 2893.299 MHz
|
|
[ 1.326495] usb 3-12: new high-speed USB device number 4 using xhci_hcd
|
|
[ 1.326500] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b4889c8c0, max_idle_ns: 440795211360 ns
|
|
[ 1.326534] clocksource: Switched to clocksource tsc
|
|
[ 1.328527] ata2.00: ATA-8: KINGSTON SMS200S3120G, 603ABBF0, max UDMA/133
|
|
[ 1.328529] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
|
|
[ 1.333972] ata2.00: configured for UDMA/133
|
|
[ 1.344314] scsi 1:0:0:0: Direct-Access ATA KINGSTON SMS200S BBF0 PQ: 0 ANSI: 5
|
|
[ 1.344602] sd 1:0:0:0: Attached scsi generic sg1 type 0
|
|
[ 1.344686] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
|
|
[ 1.344698] sd 1:0:0:0: [sdb] Write Protect is off
|
|
[ 1.344700] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
|
|
[ 1.344723] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
|
|
[ 1.363419] sdb: sdb1 sdb2
|
|
[ 1.363696] sd 1:0:0:0: [sdb] Attached SCSI disk
|
|
[ 1.415252] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758]
|
|
[ 1.445479] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..]
|
|
[ 1.445483] psmouse serio1: synaptics: Trying to set up SMBus access
|
|
[ 1.542889] usb 3-12: New USB device found, idVendor=04f2, idProduct=b39a, bcdDevice=26.03
|
|
[ 1.542891] usb 3-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0
|
|
[ 1.542892] usb 3-12: Product: Integrated Camera
|
|
[ 1.542892] usb 3-12: Manufacturer: SunplusIT INC.
|
|
[ 1.657851] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
|
|
[ 1.660554] ata6.00: ATAPI: HL-DT-ST DVDRAM GU90N, LU20, max UDMA/133
|
|
[ 1.665397] ata6.00: configured for UDMA/133
|
|
[ 1.679305] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GU90N LU20 PQ: 0 ANSI: 5
|
|
[ 1.736206] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
|
|
[ 1.736207] cdrom: Uniform CD-ROM driver Revision: 3.20
|
|
[ 1.750692] sr 5:0:0:0: Attached scsi CD-ROM sr0
|
|
[ 1.750761] sr 5:0:0:0: Attached scsi generic sg2 type 5
|
|
[ 2.156668] Console: switching to colour frame buffer device 240x67
|
|
[ 2.176583] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
|
|
[ 2.318599] scsi 6:0:0:0: Direct-Access hp v125w 1100 PQ: 0 ANSI: 4
|
|
[ 2.318876] sd 6:0:0:0: Attached scsi generic sg3 type 0
|
|
[ 2.319090] sd 6:0:0:0: [sdc] 61030400 512-byte logical blocks: (31.2 GB/29.1 GiB)
|
|
[ 2.319641] sd 6:0:0:0: [sdc] Write Protect is off
|
|
[ 2.319643] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
|
|
[ 2.320168] sd 6:0:0:0: [sdc] No Caching mode page found
|
|
[ 2.320203] sd 6:0:0:0: [sdc] Assuming drive cache: write through
|
|
[ 2.345375] sdc: sdc1
|
|
[ 2.347101] sd 6:0:0:0: [sdc] Attached SCSI removable disk
|
|
[ 3.416116] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
|
|
[ 9.227918] systemd[1]: Inserted module 'autofs4'
|
|
[ 9.251722] systemd[1]: systemd 245.4-4ubuntu3.3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
|
|
[ 9.270526] systemd[1]: Detected architecture x86-64.
|
|
[ 9.291197] systemd[1]: Set hostname to <mint>.
|
|
[ 9.434391] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
|
|
[ 9.461251] systemd[1]: Created slice system-modprobe.slice.
|
|
[ 9.461468] systemd[1]: Created slice User and Session Slice.
|
|
[ 9.461514] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
|
|
[ 9.461658] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
|
|
[ 9.461679] systemd[1]: Reached target User and Group Name Lookups.
|
|
[ 9.461687] systemd[1]: Reached target Remote File Systems.
|
|
[ 9.461696] systemd[1]: Reached target Slices.
|
|
[ 9.461705] systemd[1]: Reached target Swap.
|
|
[ 9.461755] systemd[1]: Listening on Device-mapper event daemon FIFOs.
|
|
[ 9.462046] systemd[1]: Listening on LVM2 poll daemon socket.
|
|
[ 9.462136] systemd[1]: Listening on Syslog Socket.
|
|
[ 9.463479] systemd[1]: Listening on Process Core Dump Socket.
|
|
[ 9.463521] systemd[1]: Listening on initctl Compatibility Named Pipe.
|
|
[ 9.463654] systemd[1]: Listening on Journal Audit Socket.
|
|
[ 9.463715] systemd[1]: Listening on Journal Socket (/dev/log).
|
|
[ 9.463786] systemd[1]: Listening on Journal Socket.
|
|
[ 9.463869] systemd[1]: Listening on udev Control Socket.
|
|
[ 9.463927] systemd[1]: Listening on udev Kernel Socket.
|
|
[ 9.464598] systemd[1]: Mounting Huge Pages File System...
|
|
[ 9.465375] systemd[1]: Mounting POSIX Message Queue File System...
|
|
[ 9.466451] systemd[1]: Mounting Kernel Debug File System...
|
|
[ 9.467216] systemd[1]: Mounting Kernel Trace File System...
|
|
[ 9.468331] systemd[1]: Starting Journal Service...
|
|
[ 9.469240] systemd[1]: Starting Availability of block devices...
|
|
[ 9.470372] systemd[1]: Starting Set the console keyboard layout...
|
|
[ 9.471943] systemd[1]: Starting Create list of static device nodes for the current kernel...
|
|
[ 9.473076] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
|
|
[ 9.473123] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
|
|
[ 9.473757] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
|
|
[ 9.475143] systemd[1]: Starting Load Kernel Modules...
|
|
[ 9.475868] systemd[1]: Starting Remount Root and Kernel File Systems...
|
|
[ 9.476934] systemd[1]: Starting udev Coldplug all Devices...
|
|
[ 9.478031] systemd[1]: Starting Uncomplicated firewall...
|
|
[ 9.479696] systemd[1]: Mounted Huge Pages File System.
|
|
[ 9.479867] systemd[1]: Mounted POSIX Message Queue File System.
|
|
[ 9.480000] systemd[1]: Mounted Kernel Debug File System.
|
|
[ 9.480138] systemd[1]: Mounted Kernel Trace File System.
|
|
[ 9.481867] systemd[1]: Finished Availability of block devices.
|
|
[ 9.487250] systemd[1]: Finished Uncomplicated firewall.
|
|
[ 9.507984] systemd[1]: Finished Remount Root and Kernel File Systems.
|
|
[ 9.508539] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
|
|
[ 9.508566] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
|
|
[ 9.509231] systemd[1]: Starting Load/Save Random Seed...
|
|
[ 9.509984] systemd[1]: Starting Create System Users...
|
|
[ 9.515871] systemd[1]: Finished Load/Save Random Seed.
|
|
[ 9.542707] systemd[1]: Finished Create list of static device nodes for the current kernel.
|
|
[ 9.554044] systemd[1]: Finished Create System Users.
|
|
[ 9.555037] systemd[1]: Starting Create Static Device Nodes in /dev...
|
|
[ 9.583610] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
|
|
[ 9.589659] systemd[1]: Started Journal Service.
|
|
[ 9.613259] systemd-journald[946]: Received client request to flush runtime journal.
|
|
[ 9.648687] lp: driver loaded but no devices found
|
|
[ 9.659260] ppdev: user-space parallel port driver
|
|
[ 10.990467] EDAC ie31200: No ECC support
|
|
[ 10.991544] EDAC ie31200: No ECC support
|
|
[ 11.122725] mei_me 0000:00:16.0: H_RST is set = 0x80000015
|
|
[ 11.256954] Non-volatile memory driver v1.3
|
|
[ 11.264430] mc: Linux media interface: v0.10
|
|
[ 11.265062] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
|
|
[ 11.265064] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
|
|
[ 11.265065] RAPL PMU: hw unit of domain package 2^-14 Joules
|
|
[ 11.265065] RAPL PMU: hw unit of domain dram 2^-14 Joules
|
|
[ 11.265066] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
|
|
[ 11.321763] thinkpad_acpi: ThinkPad ACPI Extras v0.26
|
|
[ 11.321765] thinkpad_acpi: http://ibm-acpi.sf.net/
|
|
[ 11.321766] thinkpad_acpi: ThinkPad BIOS GLETA1WW (2.55), EC GLHT30WW-3.23
|
|
[ 11.330085] cfg80211: Loading compiled-in X.509 certificates for regulatory database
|
|
[ 11.335972] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
|
|
[ 11.353204] thinkpad_acpi: radio switch found; radios are enabled
|
|
[ 11.353454] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
|
|
[ 11.353469] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
|
|
[ 11.353469] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
|
|
[ 11.354444] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
|
|
[ 11.356105] Bluetooth: Core ver 2.22
|
|
[ 11.356121] NET: Registered protocol family 31
|
|
[ 11.356122] Bluetooth: HCI device and connection manager initialized
|
|
[ 11.356125] Bluetooth: HCI socket layer initialized
|
|
[ 11.356128] Bluetooth: L2CAP socket layer initialized
|
|
[ 11.356134] Bluetooth: SCO socket layer initialized
|
|
[ 11.366245] videodev: Linux video capture interface: v2.00
|
|
[ 11.374666] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
|
|
[ 11.375641] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
|
|
[ 11.389241] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
|
|
[ 11.389308] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
|
|
[ 11.389372] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
|
|
[ 11.389427] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
|
|
[ 11.389484] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
|
|
[ 11.418046] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
|
|
[ 11.423858] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
|
|
[ 11.425730] battery: new extension: ThinkPad Battery Extension
|
|
[ 11.425792] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
|
|
[ 11.446294] Intel(R) Wireless WiFi driver for Linux
|
|
[ 11.446295] Copyright(c) 2003- 2015 Intel Corporation
|
|
[ 11.495472] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
|
|
[ 11.495475] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
|
|
[ 11.495476] snd_hda_codec_realtek hdaudioC1D0: hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
|
|
[ 11.495477] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
|
|
[ 11.495478] snd_hda_codec_realtek hdaudioC1D0: inputs:
|
|
[ 11.495480] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19
|
|
[ 11.495481] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a
|
|
[ 11.495483] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
|
|
[ 11.542859] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
|
|
[ 11.542938] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
|
|
[ 11.543007] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
|
|
[ 11.543075] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
|
|
[ 11.613139] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b39a)
|
|
[ 11.640995] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.0/input/input17
|
|
[ 11.641138] usbcore: registered new interface driver uvcvideo
|
|
[ 11.641139] USB Video Class driver (1.1.1)
|
|
[ 11.661085] usbcore: registered new interface driver btusb
|
|
[ 11.667279] rmi4_smbus 0-002c: registering SMbus-connected sensor
|
|
[ 11.679440] Bluetooth: hci0: read Intel version: 370810011003110e32
|
|
[ 11.679442] Bluetooth: hci0: Intel device is already patched. patch num: 32
|
|
[ 11.721021] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: TM3053-003, fw id: 1741108
|
|
[ 11.724194] iwlwifi 0000:03:00.0: Found debug destination: EXTERNAL_DRAM
|
|
[ 11.724196] iwlwifi 0000:03:00.0: Found debug configuration: 0
|
|
[ 11.724511] iwlwifi 0000:03:00.0: loaded firmware version 29.1654887522.0 op_mode iwlmvm
|
|
[ 11.809460] input: Synaptics TM3053-003 as /devices/rmi4-00/input/input18
|
|
[ 11.819739] serio: RMI4 PS/2 pass-through port at rmi4-00.fn03
|
|
[ 11.853578] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
|
|
[ 11.866922] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
|
|
[ 11.867376] iwlwifi 0000:03:00.0: Allocated 0x00400000 bytes for firmware monitor.
|
|
[ 11.872692] iwlwifi 0000:03:00.0: base HW address: 60:57:18:f0:6a:04
|
|
[ 12.114755] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
|
|
[ 12.115097] thermal thermal_zone3: failed to read out thermal zone (-61)
|
|
[ 12.176753] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
|
|
[ 12.224882] input: TPPS/2 IBM TrackPoint as /devices/rmi4-00/rmi4-00.fn03/serio2/input/input19
|
|
[ 12.525674] intel_rapl_common: Found RAPL domain package
|
|
[ 12.525676] intel_rapl_common: Found RAPL domain core
|
|
[ 12.525677] intel_rapl_common: Found RAPL domain uncore
|
|
[ 12.525677] intel_rapl_common: Found RAPL domain dram
|
|
[ 12.597721] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
|
|
[ 12.611373] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
|
|
[ 12.611375] Bluetooth: BNEP filters: protocol multicast
|
|
[ 12.611379] Bluetooth: BNEP socket layer initialized
|
|
[ 12.633816] NET: Registered protocol family 38
|
|
[ 12.663941] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
|
|
[ 12.741913] iwlwifi 0000:03:00.0: Applying debug destination EXTERNAL_DRAM
|
|
[ 12.742373] pcieport 0000:00:1c.1: AER: Corrected error received: 0000:00:1c.1
|
|
[ 12.742379] pcieport 0000:00:1c.1: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
|
|
[ 12.742382] pcieport 0000:00:1c.1: AER: device [8086:8c12] error status/mask=00000001/00002000
|
|
[ 12.742383] pcieport 0000:00:1c.1: AER: [ 0] RxErr
|
|
[ 12.743090] iwlwifi 0000:03:00.0: FW already configured (0) - re-configuring
|
|
[ 13.134449] mei_me 0000:00:16.0: wait hw ready failed
|
|
[ 13.134455] mei_me 0000:00:16.0: hw_start failed ret = -62
|
|
[ 13.134479] mei_me 0000:00:16.0: H_RST is set = 0x80000015
|
|
[ 14.868105] Bluetooth: RFCOMM TTY layer initialized
|
|
[ 14.868113] Bluetooth: RFCOMM socket layer initialized
|
|
[ 14.868118] Bluetooth: RFCOMM ver 1.11
|
|
[ 15.154447] mei_me 0000:00:16.0: wait hw ready failed
|
|
[ 15.154452] mei_me 0000:00:16.0: hw_start failed ret = -62
|
|
[ 15.154489] mei_me 0000:00:16.0: H_RST is set = 0x80000015
|
|
[ 17.166436] mei_me 0000:00:16.0: wait hw ready failed
|
|
[ 17.166442] mei_me 0000:00:16.0: hw_start failed ret = -62
|
|
[ 17.166454] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
|
|
[ 17.166456] mei_me 0000:00:16.0: reset failed ret = -19
|
|
[ 17.166458] mei_me 0000:00:16.0: link layer initialization failed.
|
|
[ 17.166460] mei_me 0000:00:16.0: init hw failure.
|
|
[ 17.166533] mei_me 0000:00:16.0: initialization failed.
|