|
|
|
|
|
coreboot-4.10-1443-g21d6a27ac0 Sat Nov 9 11:03:03 UTC 2019 bootblock starting (log level: 7)...
|
|
CBFS: 'Master Header Locator' located CBFS at [510200:c00000)
|
|
CBFS: Locating 'fallback/romstage'
|
|
CBFS: Found @ offset 80 size 6c24
|
|
|
|
|
|
coreboot-4.10-1443-g21d6a27ac0 Sat Nov 9 11:03:03 UTC 2019 romstage starting (log level: 7)...
|
|
Disabling Watchdog reboot... done.
|
|
SMBus controller enabled.
|
|
Setting up static northbridge registers... done.
|
|
Started PEG10 link training.
|
|
Temporarily hiding PEG10.
|
|
Started PEG10 link training.
|
|
Temporarily hiding PEG10.
|
|
Initializing IGD...
|
|
Back from haswell_early_initialization()
|
|
CPU id(306c3) ucode:00000027 Intel(R) Core(TM) i5-4300M CPU @ 2.60GHz
|
|
AES supported, TXT supported, VT supported
|
|
PCH type: QM87, device id: 8c4f, rev id 5
|
|
Starting UEFI PEI System Agent
|
|
FMAP: Found "FLASH" version 1.1 at 510000.
|
|
FMAP: base = ff400000 size = c00000 #areas = 4
|
|
FMAP: area RW_MRC_CACHE found @ 500000 (65536 bytes)
|
|
prepare_mrc_cache: at ff903ff0, size fd4
|
|
FMAP: area COREBOOT found @ 510200 (7273984 bytes)
|
|
CBFS: Locating 'mrc.bin'
|
|
CBFS: Found @ offset 68fdc0 size 2e6e4
|
|
System Agent: Starting up...
|
|
System Agent: Initializing PCH
|
|
install_ppi: overwrite GUID {ed097352-9041-445a-80b6-b29d509e8845}
|
|
install_ppi: overwrite GUID {908c7f8b-5c48-47fb-8357-f5fd4e235276}
|
|
System Agent: Initializing PCH (SMBUS)
|
|
System Agent: Initializing PCH (USB)
|
|
System Agent: Initializing PCH (SA Init)
|
|
System Agent: Initializing PCH (Me UMA)
|
|
System Agent: Initializing Memory
|
|
System Agent: Done.
|
|
Sanity checking heap.
|
|
System Agent Version 1.6.1 Build 2
|
|
memcfg DDR3 clock 1600 MHz
|
|
memcfg channel assignment: A: 0, B 1, C 2
|
|
memcfg channel[0] config (00620020):
|
|
ECC inactive
|
|
enhanced interleave mode on
|
|
rank interleave on
|
|
DIMMA 8192 MB width x8 or x32 dual rank, selected
|
|
DIMMB 0 MB width x8 or x32 single rank
|
|
memcfg channel[1] config (00620020):
|
|
ECC inactive
|
|
enhanced interleave mode on
|
|
rank interleave on
|
|
DIMMA 8192 MB width x8 or x32 dual rank, selected
|
|
DIMMB 0 MB width x8 or x32 single rank
|
|
ME: FW Partition Table : OK
|
|
ME: Bringup Loader Failure : NO
|
|
ME: Firmware Init Complete : NO
|
|
ME: Manufacturing Mode : YES
|
|
ME: Boot Options Present : NO
|
|
ME: Update In Progress : NO
|
|
ME: Current Working State : Initializing
|
|
ME: Current Operation State : Bring up
|
|
ME: Current Operation Mode : Debug
|
|
ME: Error Code : No Error
|
|
ME: Progress Phase : BUP Phase
|
|
ME: Power Management Event : Clean Moff->Mx wake
|
|
ME: Progress Phase State : 0x4d
|
|
CBMEM:
|
|
IMD: root @ 7f7ff000 254 entries.
|
|
IMD: root @ 7f7fec00 62 entries.
|
|
External stage cache:
|
|
IMD: root @ 7fbff000 254 entries.
|
|
IMD: root @ 7fbfec00 62 entries.
|
|
Unhiding PEG10.
|
|
SMM Memory Map
|
|
SMRAM : 0x7f800000 0x800000
|
|
Subregion 0: 0x7f800000 0x300000
|
|
Subregion 1: 0x7fb00000 0x100000
|
|
Subregion 2: 0x7fc00000 0x400000
|
|
MTRR Range: Start=7f000000 End=80000000 (Size 1000000)
|
|
MTRR Range: Start=ff800000 End=0 (Size 800000)
|
|
CBFS: 'Master Header Locator' located CBFS at [510200:c00000)
|
|
CBFS: Locating 'fallback/postcar'
|
|
CBFS: Found @ offset 35cc0 size 463c
|
|
Decompressing stage fallback/postcar @ 0x7f7d1fc0 (34480 bytes)
|
|
Loading module at 7f7d2000 with entry 7f7d2000. filesize: 0x4390 memsize: 0x8670
|
|
Processing 148 relocs. Offset value of 0x7d7d2000
|
|
|
|
|
|
coreboot-4.10-1443-g21d6a27ac0 Sat Nov 9 11:03:03 UTC 2019 postcar starting (log level: 6)...
|
|
CBFS: 'Master Header Locator' located CBFS at [510200:c00000)
|
|
CBFS: Locating 'fallback/ramstage'
|
|
CBFS: Found @ offset 11dc0 size 1c051
|
|
Decompressing stage fallback/ramstage @ 0x7f781fc0 (322648 bytes)
|
|
Loading module at 7f782000 with entry 7f782000. filesize: 0x39ab8 memsize: 0x4ec18
|
|
Processing 3910 relocs. Offset value of 0x7e982000
|
|
|
|
|
|
coreboot-4.10-1443-g21d6a27ac0 Sat Nov 9 11:03:03 UTC 2019 ramstage starting (log level: 6)...
|
|
Normal boot.
|
|
BS: BS_PRE_DEVICE times (ms): entry 0 run 0 exit 0
|
|
BS: BS_DEV_INIT_CHIPS times (ms): entry 0 run 0 exit 0
|
|
Enumerating buses...
|
|
CPU_CLUSTER: 0 enabled
|
|
DOMAIN: 0000 enabled
|
|
PCI: pci_scan_bus for bus 00
|
|
PCI: 00:00.0 [8086/0c04] enabled
|
|
PCI: 00:01.0 subordinate bus PCI Express
|
|
PCI: 00:01.0 [8086/0c01] enabled
|
|
PCI: 00:02.0 [8086/0416] enabled
|
|
PCI: 00:03.0 [8086/0c0c] enabled
|
|
PCI: 00:04.0 [8086/0c03] enabled
|
|
PCI: 00:14.0 [8086/8c31] enabled
|
|
PCI: 00:16.0 [8086/8c3a] enabled
|
|
PCI: 00:16.1: Disabling device
|
|
PCI: 00:16.2: Disabling device
|
|
PCI: 00:16.3: Disabling device
|
|
PCI: 00:19.0 [8086/153a] enabled
|
|
PCI: 00:1a.0 [8086/8c2d] enabled
|
|
PCI: 00:1b.0 [8086/8c20] enabled
|
|
PCIe Root Port 1 ASPM is disabled
|
|
PCI: 00:1c.0 [8086/8c10] enabled
|
|
PCIe Root Port 2 ASPM is disabled
|
|
PCI: 00:1c.1 [8086/8c12] enabled
|
|
PCI: 00:1c.2 [8086/8c14] disabled
|
|
PCI: 00:1c.3 [8086/8c16] disabled
|
|
PCI: 00:1c.4 [8086/8c18] disabled
|
|
PCI: 00:1d.0 [8086/8c26] enabled
|
|
PCI: 00:1f.0 [8086/8c4f] enabled
|
|
PCI: 00:1f.2 [8086/8c03] enabled
|
|
PCI: 00:1f.3 [8086/8c22] enabled
|
|
PCI: 00:1f.5: Disabling device
|
|
PCI: 00:1f.6: Disabling device
|
|
PCI: Leftover static devices:
|
|
PCI: 00:16.1
|
|
PCI: 00:16.2
|
|
PCI: 00:16.3
|
|
PCI: 00:1c.5
|
|
PCI: 00:1c.6
|
|
PCI: 00:1c.7
|
|
PCI: 00:1f.5
|
|
PCI: 00:1f.6
|
|
PCI: Check your devicetree.cb.
|
|
PCI: pci_scan_bus for bus 01
|
|
scan_bus: scanning of bus PCI: 00:01.0 took 18 usecs
|
|
PCI: pci_scan_bus for bus 02
|
|
PCI: 02:00.0 [10ec/5227] enabled
|
|
Enabling Common Clock Configuration
|
|
ASPM: Enabled L0s and L1
|
|
scan_bus: scanning of bus PCI: 00:1c.0 took 208 usecs
|
|
PCI: pci_scan_bus for bus 03
|
|
PCI: 03:00.0 [8086/08b2] enabled
|
|
Enabling Common Clock Configuration
|
|
ASPM: Enabled L1
|
|
scan_bus: scanning of bus PCI: 00:1c.1 took 240 usecs
|
|
No CMOS option 'touchpad'.
|
|
PMH7: ID 05 Revision 12
|
|
PNP: 00ff.1 enabled
|
|
EC Firmware ID GLHT29WW-3.23, Version 2.01B
|
|
No CMOS option 'bluetooth'.
|
|
H8: WWAN detection not implemented. Assuming WWAN installed
|
|
No CMOS option 'wwan'.
|
|
PNP: 00ff.2 enabled
|
|
PNP: 0c31.0 enabled
|
|
scan_bus: scanning of bus PCI: 00:1f.0 took 4779 usecs
|
|
scan_bus: scanning of bus PCI: 00:1f.3 took 2 usecs
|
|
scan_bus: scanning of bus DOMAIN: 0000 took 5514 usecs
|
|
scan_bus: scanning of bus Root Device took 5520 usecs
|
|
done
|
|
FMAP: area RW_MRC_CACHE found @ 500000 (65536 bytes)
|
|
MRC: Checking cached data update for 'RW_MRC_CACHE'.
|
|
flash size 0x2800000 bytes
|
|
SF: Detected Opaque HW-sequencing with sector size 0x1000, total 0x2800000
|
|
SF size 0x2800000 does not correspond to CONFIG_ROM_SIZE 0xc00000!!
|
|
BS: BS_DEV_ENUMERATE times (ms): entry 0 run 6 exit 0
|
|
found VGA at PCI: 00:02.0
|
|
Setting up VGA for PCI: 00:02.0
|
|
Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000
|
|
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
|
|
Allocating resources...
|
|
Reading resources...
|
|
mc_add_fixed_mmio_resources: Adding PCIEXBAR @ 60 0xf0000000-0xf3ffffff.
|
|
mc_add_fixed_mmio_resources: Adding MCHBAR @ 48 0xfed10000-0xfed17fff.
|
|
mc_add_fixed_mmio_resources: Adding DMIBAR @ 68 0xfed18000-0xfed18fff.
|
|
mc_add_fixed_mmio_resources: Adding EPBAR @ 40 0xfed19000-0xfed19fff.
|
|
mc_add_fixed_mmio_resources: Adding GDXCBAR @ 5420 0xfed84000-0xfed84fff.
|
|
MC MAP: TOM: 0x400000000
|
|
MC MAP: TOUUD: 0x479e00000
|
|
MC MAP: MESEG_BASE: 0x7ffff00000
|
|
MC MAP: MESEG_LIMIT: 0xfffff
|
|
MC MAP: REMAP_BASE: 0x400000000
|
|
MC MAP: REMAP_LIMIT: 0x479dfffff
|
|
MC MAP: TOLUD: 0x86200000
|
|
MC MAP: BGSM: 0x80000000
|
|
MC MAP: BDSM: 0x80200000
|
|
MC MAP: TESGMB: 0x7f800000
|
|
MC MAP: GGC: 0x219
|
|
PNP: 00ff.1 missing read_resources
|
|
PNP: 00ff.2 missing read_resources
|
|
Done reading resources.
|
|
skipping PNP: 00ff.2@60 fixed resource, size=0!
|
|
skipping PNP: 00ff.2@62 fixed resource, size=0!
|
|
skipping PNP: 00ff.2@64 fixed resource, size=0!
|
|
skipping PNP: 00ff.2@66 fixed resource, size=0!
|
|
Setting resources...
|
|
PCI: 00:01.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 01 io
|
|
PCI: 00:01.0 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 prefmem
|
|
PCI: 00:01.0 20 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 mem
|
|
PCI: 00:02.0 10 <- [0x00e0000000 - 0x00e03fffff] size 0x00400000 gran 0x16 mem64
|
|
PCI: 00:02.0 18 <- [0x00d0000000 - 0x00dfffffff] size 0x10000000 gran 0x1c prefmem64
|
|
PCI: 00:02.0 20 <- [0x0000001800 - 0x000000183f] size 0x00000040 gran 0x06 io
|
|
PCI: 00:03.0 10 <- [0x00e0638000 - 0x00e063bfff] size 0x00004000 gran 0x0e mem64
|
|
PCI: 00:04.0 10 <- [0x00e0630000 - 0x00e0637fff] size 0x00008000 gran 0x0f mem64
|
|
PCI: 00:14.0 10 <- [0x00e0620000 - 0x00e062ffff] size 0x00010000 gran 0x10 mem64
|
|
PCI: 00:16.0 10 <- [0x00e0645000 - 0x00e064500f] size 0x00000010 gran 0x04 mem64
|
|
PCI: 00:19.0 10 <- [0x00e0600000 - 0x00e061ffff] size 0x00020000 gran 0x11 mem
|
|
PCI: 00:19.0 14 <- [0x00e0640000 - 0x00e0640fff] size 0x00001000 gran 0x0c mem
|
|
PCI: 00:19.0 18 <- [0x0000001840 - 0x000000185f] size 0x00000020 gran 0x05 io
|
|
PCI: 00:1a.0 10 <- [0x00e0642000 - 0x00e06423ff] size 0x00000400 gran 0x0a mem
|
|
PCI: 00:1b.0 10 <- [0x00e063c000 - 0x00e063ffff] size 0x00004000 gran 0x0e mem64
|
|
PCI: 00:1c.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 02 io
|
|
PCI: 00:1c.0 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 02 prefmem
|
|
PCI: 00:1c.0 20 <- [0x00e0400000 - 0x00e04fffff] size 0x00100000 gran 0x14 bus 02 mem
|
|
PCI: 02:00.0 10 <- [0x00e0400000 - 0x00e0400fff] size 0x00001000 gran 0x0c mem
|
|
PCI: 00:1c.1 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 03 io
|
|
PCI: 00:1c.1 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 03 prefmem
|
|
PCI: 00:1c.1 20 <- [0x00e0500000 - 0x00e05fffff] size 0x00100000 gran 0x14 bus 03 mem
|
|
PCI: 03:00.0 10 <- [0x00e0500000 - 0x00e0501fff] size 0x00002000 gran 0x0d mem64
|
|
PCI: 00:1d.0 10 <- [0x00e0643000 - 0x00e06433ff] size 0x00000400 gran 0x0a mem
|
|
PNP: 00ff.1 missing set_resources
|
|
PNP: 00ff.2 missing set_resources
|
|
PCI: 00:1f.2 10 <- [0x0000001880 - 0x0000001887] size 0x00000008 gran 0x03 io
|
|
PCI: 00:1f.2 14 <- [0x0000001890 - 0x0000001893] size 0x00000004 gran 0x02 io
|
|
PCI: 00:1f.2 18 <- [0x0000001888 - 0x000000188f] size 0x00000008 gran 0x03 io
|
|
PCI: 00:1f.2 1c <- [0x0000001894 - 0x0000001897] size 0x00000004 gran 0x02 io
|
|
PCI: 00:1f.2 20 <- [0x0000001860 - 0x000000187f] size 0x00000020 gran 0x05 io
|
|
PCI: 00:1f.2 24 <- [0x00e0641000 - 0x00e06417ff] size 0x00000800 gran 0x0b mem
|
|
PCI: 00:1f.3 10 <- [0x00e0644000 - 0x00e06440ff] size 0x00000100 gran 0x08 mem64
|
|
Done setting resources.
|
|
Done allocating resources.
|
|
BS: BS_DEV_RESOURCES times (ms): entry 0 run 1 exit 0
|
|
Enabling resources...
|
|
PCI: 00:00.0 subsystem <- 17aa/220e
|
|
PCI: 00:00.0 cmd <- 06
|
|
PCI: 00:01.0 bridge ctrl <- 0013
|
|
PCI: 00:01.0 cmd <- 00
|
|
PCI: 00:02.0 subsystem <- 17aa/220e
|
|
PCI: 00:02.0 cmd <- 03
|
|
PCI: 00:03.0 subsystem <- 17aa/220e
|
|
PCI: 00:03.0 cmd <- 02
|
|
PCI: 00:04.0 cmd <- 02
|
|
PCI: 00:14.0 subsystem <- 17aa/220e
|
|
PCI: 00:14.0 cmd <- 102
|
|
PCI: 00:16.0 subsystem <- 17aa/220e
|
|
PCI: 00:16.0 cmd <- 02
|
|
PCI: 00:19.0 subsystem <- 17aa/220e
|
|
PCI: 00:19.0 cmd <- 103
|
|
PCI: 00:1a.0 subsystem <- 17aa/220e
|
|
PCI: 00:1a.0 cmd <- 102
|
|
PCI: 00:1b.0 subsystem <- 17aa/220e
|
|
PCI: 00:1b.0 cmd <- 102
|
|
PCI: 00:1c.0 bridge ctrl <- 0013
|
|
PCI: 00:1c.0 subsystem <- 17aa/220e
|
|
PCI: 00:1c.0 cmd <- 06
|
|
PCI: 00:1c.1 bridge ctrl <- 0013
|
|
PCI: 00:1c.1 subsystem <- 17aa/220e
|
|
PCI: 00:1c.1 cmd <- 06
|
|
PCI: 00:1d.0 subsystem <- 17aa/220e
|
|
PCI: 00:1d.0 cmd <- 102
|
|
PCI: 00:1f.0 subsystem <- 17aa/220e
|
|
PCI: 00:1f.0 cmd <- 107
|
|
PCI: 00:1f.2 subsystem <- 17aa/220e
|
|
PCI: 00:1f.2 cmd <- 103
|
|
PCI: 00:1f.3 subsystem <- 17aa/220e
|
|
PCI: 00:1f.3 cmd <- 103
|
|
PCI: 02:00.0 cmd <- 02
|
|
PCI: 03:00.0 cmd <- 02
|
|
done.
|
|
BS: BS_DEV_ENABLE times (ms): entry 0 run 0 exit 0
|
|
Found TPM ST33ZP24 by ST Microelectronics
|
|
TPM: Startup
|
|
TPM: command 0x99 returned 0x0
|
|
TPM: Asserting physical presence
|
|
TPM: command 0x4000000a returned 0x0
|
|
TPM: command 0x65 returned 0x0
|
|
TPM: flags disable=0, deactivated=1, nvlocked=1
|
|
TPM: setup succeeded
|
|
Initializing devices...
|
|
Root Device init ...
|
|
Root Device init finished in 1 usecs
|
|
CPU_CLUSTER: 0 init ...
|
|
MTRR: Physical address space:
|
|
0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6
|
|
0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0
|
|
0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6
|
|
0x0000000080000000 - 0x00000000d0000000 size 0x50000000 type 0
|
|
0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1
|
|
0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0
|
|
0x0000000100000000 - 0x0000000479e00000 size 0x379e00000 type 6
|
|
MTRR: Fixed MSR 0x250 0x0606060606060606
|
|
MTRR: Fixed MSR 0x258 0x0606060606060606
|
|
MTRR: Fixed MSR 0x259 0x0000000000000000
|
|
MTRR: Fixed MSR 0x268 0x0606060606060606
|
|
MTRR: Fixed MSR 0x269 0x0606060606060606
|
|
MTRR: Fixed MSR 0x26a 0x0606060606060606
|
|
MTRR: Fixed MSR 0x26b 0x0606060606060606
|
|
MTRR: Fixed MSR 0x26c 0x0606060606060606
|
|
MTRR: Fixed MSR 0x26d 0x0606060606060606
|
|
MTRR: Fixed MSR 0x26e 0x0606060606060606
|
|
MTRR: Fixed MSR 0x26f 0x0606060606060606
|
|
CPU physical address size: 39 bits
|
|
MTRR: default type WB/UC MTRR counts: 4/5.
|
|
MTRR: WB selected as default type.
|
|
MTRR: 0 base 0x0000000080000000 mask 0x0000007fc0000000 type 0
|
|
MTRR: 1 base 0x00000000c0000000 mask 0x0000007ff0000000 type 0
|
|
MTRR: 2 base 0x00000000d0000000 mask 0x0000007ff0000000 type 1
|
|
MTRR: 3 base 0x00000000e0000000 mask 0x0000007fe0000000 type 0
|
|
|
|
MTRR check
|
|
Fixed MTRRs : Enabled
|
|
Variable MTRRs: Enabled
|
|
|
|
Initializing VR config.
|
|
CPU has 2 cores, 4 threads enabled.
|
|
Setting up SMI for CPU
|
|
Will perform SMM setup.
|
|
CBFS: 'Master Header Locator' located CBFS at [510200:c00000)
|
|
CBFS: Locating 'cpu_microcode_blob.bin'
|
|
CBFS: Found @ offset 6d40 size b000
|
|
microcode: sig=0x306c3 pf=0x10 revision=0x27
|
|
CPU: Intel(R) Core(TM) i5-4300M CPU @ 2.60GHz.
|
|
Loading module at 00030000 with entry 00030000. filesize: 0x170 memsize: 0x170
|
|
Processing 16 relocs. Offset value of 0x00030000
|
|
Attempting to start 3 APs
|
|
Waiting for 10ms after sending INIT.
|
|
Waiting for 1st SIPI to complete...done.
|
|
Waiting for 2nd SIPI to complete...AP: slot 1 apic_id 1.
|
|
done.
|
|
AP: slot 2 apic_id 2.
|
|
AP: slot 3 apic_id 3.
|
|
Loading module at 00038000 with entry 00038000. filesize: 0x1a8 memsize: 0x1a8
|
|
Processing 13 relocs. Offset value of 0x00038000
|
|
SMM Module: stub loaded at 00038000. Will call 7f7a1939(00000000)
|
|
Installing SMM handler to 0x7f800000
|
|
Loading module at 7f810000 with entry 7f8105b4. filesize: 0x1d90 memsize: 0x5dd8
|
|
Processing 97 relocs. Offset value of 0x7f810000
|
|
Loading module at 7f808000 with entry 7f808000. filesize: 0x1a8 memsize: 0x1a8
|
|
Processing 13 relocs. Offset value of 0x7f808000
|
|
SMM Module: placing jmp sequence at 7f807c00 rel16 0x03fd
|
|
SMM Module: placing jmp sequence at 7f807800 rel16 0x07fd
|
|
SMM Module: placing jmp sequence at 7f807400 rel16 0x0bfd
|
|
SMM Module: stub loaded at 7f808000. Will call 7f8105b4(00000000)
|
|
Initializing Southbridge SMI...
|
|
SMI_STS: MCSMI PM1
|
|
WAK PWRBTN New SMBASE 0x7f800000
|
|
In relocation handler: cpu 0
|
|
New SMBASE=0x7f800000 IEDBASE=0x7fc00000
|
|
Writing SMRR. base = 0x7f800006, mask=0xff800800
|
|
Relocation complete.
|
|
microcode: Update skipped, already up-to-date
|
|
New SMBASE 0x7f7ffc00
|
|
In relocation handler: cpu 1
|
|
New SMBASE=0x7f7ffc00 IEDBASE=0x7fc00000
|
|
Writing SMRR. base = 0x7f800006, mask=0xff800800
|
|
Relocation complete.
|
|
microcode: Update skipped, already up-to-date
|
|
New SMBASE 0x7f7ff400
|
|
In relocation handler: cpu 3
|
|
New SMBASE=0x7f7ff400 IEDBASE=0x7fc00000
|
|
Writing SMRR. base = 0x7f800006, mask=0xff800800
|
|
Relocation complete.
|
|
microcode: Update skipped, already up-to-date
|
|
New SMBASE 0x7f7ff800
|
|
In relocation handler: cpu 2
|
|
New SMBASE=0x7f7ff800 IEDBASE=0x7fc00000
|
|
Writing SMRR. base = 0x7f800006, mask=0xff800800
|
|
Relocation complete.
|
|
microcode: Update skipped, already up-to-date
|
|
Initializing CPU #0
|
|
CPU: vendor Intel device 306c3
|
|
CPU: family 06, model 3c, stepping 03
|
|
Setting up local APIC...
|
|
apic_id: 0x00 done.
|
|
VMX status: enabled
|
|
IA32_FEATURE_CONTROL status: locked
|
|
haswell: energy policy set to 6
|
|
haswell: frequency set to 2600
|
|
Turbo is available but hidden
|
|
Turbo is available and visible
|
|
CPU #0 initialized
|
|
Initializing CPU #1
|
|
Initializing CPU #2
|
|
Initializing CPU #3
|
|
CPU: vendor Intel device 306c3
|
|
CPU: family 06, model 3c, stepping 03
|
|
CPU: vendor Intel device 306c3
|
|
CPU: family 06, model 3c, stepping 03
|
|
CPU: vendor Intel device 306c3
|
|
CPU: family 06, model 3c, stepping 03
|
|
Setting up local APIC...
|
|
Setting up local APIC...
|
|
apic_id: 0x02 Setting up local APIC...
|
|
done.
|
|
apic_id: 0x03 done.
|
|
VMX status: enabled
|
|
VMX status: enabled
|
|
apic_id: 0x01 done.
|
|
IA32_FEATURE_CONTROL status: locked
|
|
IA32_FEATURE_CONTROL status: locked
|
|
VMX status: enabled
|
|
IA32_FEATURE_CONTROL status: locked
|
|
haswell: energy policy set to 6
|
|
haswell: energy policy set to 6
|
|
haswell: energy policy set to 6
|
|
haswell: frequency set to 2600
|
|
CPU #1 initialized
|
|
haswell: frequency set to 2600
|
|
haswell: frequency set to 2600
|
|
CPU #2 initialized
|
|
CPU #3 initialized
|
|
bsp_do_flight_plan done after 1 msecs.
|
|
Enabling SMIs.
|
|
Locking SMM.
|
|
CPU_CLUSTER: 0 init finished in 15735 usecs
|
|
PCI: 00:00.0 init ...
|
|
Disabling PEG12.
|
|
Disabling PEG11.
|
|
Disabling "device 7".
|
|
Set BIOS_RESET_CPL
|
|
CPU TDP: 37 Watts
|
|
PCI: 00:00.0 init finished in 1011 usecs
|
|
PCI: 00:02.0 init ...
|
|
GT Power Management Init
|
|
GT Power Management Init (post VBIOS)
|
|
|
|
[0.295423] CONFIG =>
|
|
[0.295423] (Primary =>
|
|
[0.295424] (Port => Internal,
|
|
[0.295424] Framebuffer =>
|
|
[0.295424] (Width => 640,
|
|
[0.295425] Height => 400,
|
|
[0.295425] Start_X => 0,
|
|
[0.295426] Start_Y => 0,
|
|
[0.295426] Stride => 1,
|
|
[0.295427] V_Stride => 1,
|
|
[0.295427] Tiling => Linear ,
|
|
[0.295428] Rotation => No_Rotation,
|
|
[0.295428] Offset => 0xffffffff,
|
|
[0.295429] BPC => 8),
|
|
[0.295429] Mode =>
|
|
[0.295430] (Dotclock => 152840000,
|
|
[0.295430] H_Visible => 1920,
|
|
[0.295431] H_Sync_Begin => 2000,
|
|
[0.295431] H_Sync_End => 2060,
|
|
[0.295432] H_Total => 2250,
|
|
[0.295432] V_Visible => 1080,
|
|
[0.295433] V_Sync_Begin => 1086,
|
|
[0.295433] V_Sync_End => 1094,
|
|
[0.295434] V_Total => 1132,
|
|
[0.295434] H_Sync_Active_High => True,
|
|
[0.295435] V_Sync_Active_High => False,
|
|
[0.295435] BPC => 6)),
|
|
[0.295436] Secondary =>
|
|
[0.295436] (Port => Disabled,
|
|
[0.295436] Framebuffer =>
|
|
[0.295437] (Width => 1,
|
|
[0.295437] Height => 1,
|
|
[0.295438] Start_X => 0,
|
|
[0.295438] Start_Y => 0,
|
|
[0.295439] Stride => 1,
|
|
[0.295439] V_Stride => 1,
|
|
[0.295440] Tiling => Linear ,
|
|
[0.295440] Rotation => No_Rotation,
|
|
[0.295441] Offset => 0x00000000,
|
|
[0.295441] BPC => 8),
|
|
[0.295442] Mode =>
|
|
[0.295442] (Dotclock => 1000000,
|
|
[0.295443] H_Visible => 1,
|
|
[0.295443] H_Sync_Begin => 1,
|
|
[0.295444] H_Sync_End => 1,
|
|
[0.295444] H_Total => 1,
|
|
[0.295445] V_Visible => 1,
|
|
[0.295445] V_Sync_Begin => 1,
|
|
[0.295446] V_Sync_End => 1,
|
|
[0.295446] V_Total => 1,
|
|
[0.295447] H_Sync_Active_High => False,
|
|
[0.295447] V_Sync_Active_High => False,
|
|
[0.295448] BPC => 5)),
|
|
[0.295448] Tertiary =>
|
|
[0.295449] (Port => Disabled,
|
|
[0.295449] Framebuffer =>
|
|
[0.295449] (Width => 1,
|
|
[0.295450] Height => 1,
|
|
[0.295450] Start_X => 0,
|
|
[0.295451] Start_Y => 0,
|
|
[0.295451] Stride => 1,
|
|
[0.295452] V_Stride => 1,
|
|
[0.295452] Tiling => Linear ,
|
|
[0.295453] Rotation => No_Rotation,
|
|
[0.295453] Offset => 0x00000000,
|
|
[0.295454] BPC => 8),
|
|
[0.295454] Mode =>
|
|
[0.295454] (Dotclock => 1000000,
|
|
[0.295455] H_Visible => 1,
|
|
[0.295455] H_Sync_Begin => 1,
|
|
[0.295456] H_Sync_End => 1,
|
|
[0.295456] H_Total => 1,
|
|
[0.295457] V_Visible => 1,
|
|
[0.295457] V_Sync_Begin => 1,
|
|
[0.295458] V_Sync_End => 1,
|
|
[0.295458] V_Total => 1,
|
|
[0.295459] H_Sync_Active_High => False,
|
|
[0.295459] V_Sync_Active_High => False,
|
|
[0.295460] BPC => 5)));
|
|
PCI: 00:02.0 init finished in 208112 usecs
|
|
PCI: 00:03.0 init ...
|
|
Mini-HD: base = e0638000
|
|
HDA: Initializing codec #0
|
|
HDA: codec viddid: 80862807
|
|
HDA: verb loaded.
|
|
PCI: 00:03.0 init finished in 1284 usecs
|
|
PCI: 00:04.0 init ...
|
|
PCI: 00:04.0 init finished in 0 usecs
|
|
PCI: 00:14.0 init ...
|
|
IOBP: set 0xe5004001 to 0x000000ce
|
|
PCI: 00:14.0 init finished in 40 usecs
|
|
PCI: 00:16.0 init ...
|
|
ME: FW Partition Table : OK
|
|
ME: Bringup Loader Failure : NO
|
|
ME: Firmware Init Complete : NO
|
|
ME: Manufacturing Mode : YES
|
|
ME: Boot Options Present : NO
|
|
ME: Update In Progress : NO
|
|
ME: Current Working State : Initializing
|
|
ME: Current Operation State : Bring up
|
|
ME: Current Operation Mode : Debug
|
|
ME: Error Code : No Error
|
|
ME: Progress Phase : BUP Phase
|
|
ME: Power Management Event : Clean Moff->Mx wake
|
|
ME: Progress Phase State : 0x4d
|
|
intel_me_path: mbp is not ready!
|
|
ME: BIOS path: Error
|
|
ME: MBP not ready
|
|
PCI: 00:16.0 init finished in 37 usecs
|
|
PCI: 00:19.0 init ...
|
|
PCI: 00:19.0 init finished in 0 usecs
|
|
PCI: 00:1a.0 init ...
|
|
EHCI: Setting up controller.. IOBP: set 0xe5004001 to 0x000000ce
|
|
done.
|
|
PCI: 00:1a.0 init finished in 32 usecs
|
|
PCI: 00:1b.0 init ...
|
|
Azalia: base = e063c000
|
|
Azalia: codec_mask = 01
|
|
HDA: Initializing codec #0
|
|
HDA: codec viddid: 10ec0292
|
|
HDA: verb loaded.
|
|
PCI: 00:1b.0 init finished in 3056 usecs
|
|
PCI: 00:1c.0 init ...
|
|
Initializing PCH PCIe bridge.
|
|
PCI: 00:1c.0 init finished in 6 usecs
|
|
PCI: 00:1c.1 init ...
|
|
Initializing PCH PCIe bridge.
|
|
PCI: 00:1c.1 init finished in 6 usecs
|
|
PCI: 00:1d.0 init ...
|
|
EHCI: Setting up controller.. IOBP: set 0xe5004001 to 0x000000ce
|
|
done.
|
|
PCI: 00:1d.0 init finished in 32 usecs
|
|
PCI: 00:1f.0 init ...
|
|
pch: lpc_init
|
|
IOAPIC: Initializing IOAPIC at 0xfec00000
|
|
IOAPIC: Bootstrap Processor Local APIC = 0x00
|
|
IOAPIC: ID = 0x02
|
|
Set power off after power failure.
|
|
NMI sources enabled.
|
|
LynxPoint PM init
|
|
RTC: failed = 0x0
|
|
RTC Init
|
|
Disabling ACPI via APMC:
|
|
done.
|
|
PCI: 00:1f.0 init finished in 504 usecs
|
|
PCI: 00:1f.2 init ...
|
|
SATA: Initializing...
|
|
SATA: Controller in AHCI mode.
|
|
ABAR: e0641000
|
|
PCI: 00:1f.2 init finished in 37 usecs
|
|
PCI: 00:1f.3 init ...
|
|
PCI: 00:1f.3 init finished in 6 usecs
|
|
PCI: 02:00.0 init ...
|
|
PCI: 02:00.0 init finished in 0 usecs
|
|
PCI: 03:00.0 init ...
|
|
PCI: 03:00.0 init finished in 0 usecs
|
|
PNP: 00ff.2 init ...
|
|
Keyboard init...
|
|
Keyboard controller output buffer result timeout
|
|
Keyboard controller output buffer result timeout
|
|
Keyboard reset failed ACK: 0xaa
|
|
PNP: 00ff.2 init finished in 1159608 usecs
|
|
Devices initialized
|
|
BS: BS_DEV_INIT times (ms): entry 65 run 1390 exit 0
|
|
Finalize devices...
|
|
PCI: 00:1f.0 final
|
|
Devices finalized
|
|
BS: BS_POST_DEVICE times (ms): entry 0 run 0 exit 0
|
|
BS: BS_OS_RESUME_CHECK times (ms): entry 0 run 0 exit 0
|
|
CBFS: 'Master Header Locator' located CBFS at [510200:c00000)
|
|
CBFS: Locating 'fallback/dsdt.aml'
|
|
CBFS: Found @ offset 3a340 size 36b9
|
|
CBFS: 'Master Header Locator' located CBFS at [510200:c00000)
|
|
CBFS: Locating 'fallback/slic'
|
|
CBFS: 'fallback/slic' not found.
|
|
ACPI: Writing ACPI tables at 7f744000.
|
|
ACPI: * FACS
|
|
ACPI: * DSDT
|
|
ACPI: * FADT
|
|
ACPI: added table 1/32, length now 40
|
|
ACPI: * SSDT
|
|
Found 1 CPU(s) with 4 core(s) each.
|
|
PSS: 2601MHz power 37000 control 0x2100 status 0x2100
|
|
PSS: 2600MHz power 37000 control 0x1a00 status 0x1a00
|
|
PSS: 2000MHz power 26518 control 0x1400 status 0x1400
|
|
PSS: 1600MHz power 20229 control 0x1000 status 0x1000
|
|
PSS: 1200MHz power 14447 control 0xc00 status 0xc00
|
|
PSS: 800MHz power 9143 control 0x800 status 0x800
|
|
PSS: 2601MHz power 37000 control 0x2100 status 0x2100
|
|
PSS: 2600MHz power 37000 control 0x1a00 status 0x1a00
|
|
PSS: 2000MHz power 26518 control 0x1400 status 0x1400
|
|
PSS: 1600MHz power 20229 control 0x1000 status 0x1000
|
|
PSS: 1200MHz power 14447 control 0xc00 status 0xc00
|
|
PSS: 800MHz power 9143 control 0x800 status 0x800
|
|
PSS: 2601MHz power 37000 control 0x2100 status 0x2100
|
|
PSS: 2600MHz power 37000 control 0x1a00 status 0x1a00
|
|
PSS: 2000MHz power 26518 control 0x1400 status 0x1400
|
|
PSS: 1600MHz power 20229 control 0x1000 status 0x1000
|
|
PSS: 1200MHz power 14447 control 0xc00 status 0xc00
|
|
PSS: 800MHz power 9143 control 0x800 status 0x800
|
|
PSS: 2601MHz power 37000 control 0x2100 status 0x2100
|
|
PSS: 2600MHz power 37000 control 0x1a00 status 0x1a00
|
|
PSS: 2000MHz power 26518 control 0x1400 status 0x1400
|
|
PSS: 1600MHz power 20229 control 0x1000 status 0x1000
|
|
PSS: 1200MHz power 14447 control 0xc00 status 0xc00
|
|
PSS: 800MHz power 9143 control 0x800 status 0x800
|
|
Generating ACPI PIRQ entries
|
|
ACPI: * H8
|
|
H8: BDC detection not implemented. Assuming BDC installed
|
|
H8: WWAN detection not implemented. Assuming WWAN installed
|
|
\_SB.PCI0.LPCB.TPM: LPC TPM PNP: 0c31.0
|
|
ACPI: added table 2/32, length now 44
|
|
ACPI: * MCFG
|
|
ACPI: added table 3/32, length now 48
|
|
ACPI: * TCPA
|
|
TCPA log created at 7f734000
|
|
ACPI: added table 4/32, length now 52
|
|
ACPI: * MADT
|
|
ACPI: added table 5/32, length now 56
|
|
current = 7f749540
|
|
ACPI: * DMAR
|
|
ACPI: added table 6/32, length now 60
|
|
CBFS: 'Master Header Locator' located CBFS at [510200:c00000)
|
|
CBFS: Locating 'vbt.bin'
|
|
CBFS: Found @ offset 35100 size 598
|
|
Found a VBT of 4608 bytes after decompression
|
|
GMA: Found VBT in CBFS
|
|
GMA: Found valid VBT in CBFS
|
|
ACPI: * HPET
|
|
ACPI: added table 7/32, length now 64
|
|
ACPI: * SSDT2
|
|
ACPI: added table 8/32, length now 68
|
|
current = 7f74b680
|
|
ACPI: done.
|
|
ACPI tables: 30336 bytes.
|
|
smbios_write_tables: 7f733000
|
|
Create SMBIOS type 17
|
|
PCI: 03:00.0 (unknown)
|
|
SMBIOS tables: 895 bytes.
|
|
Writing table forward entry at 0x00000500
|
|
Wrote coreboot table at: 00000500, 0x10 bytes, checksum 68
|
|
Writing coreboot table at 0x7f768000
|
|
CBFS: 'Master Header Locator' located CBFS at [510200:c00000)
|
|
CBFS: Locating 'cmos_layout.bin'
|
|
CBFS: Found @ offset 35700 size 560
|
|
0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
|
|
1. 0000000000001000-000000000009ffff: RAM
|
|
2. 00000000000a0000-00000000000fffff: RESERVED
|
|
3. 0000000000100000-000000007f732fff: RAM
|
|
4. 000000007f733000-000000007f781fff: CONFIGURATION TABLES
|
|
5. 000000007f782000-000000007f7d0fff: RAMSTAGE
|
|
6. 000000007f7d1000-000000007f7fffff: CONFIGURATION TABLES
|
|
7. 000000007f800000-00000000861fffff: RESERVED
|
|
8. 00000000f0000000-00000000f3ffffff: RESERVED
|
|
9. 00000000fed10000-00000000fed19fff: RESERVED
|
|
10. 00000000fed40000-00000000fed44fff: RESERVED
|
|
11. 00000000fed84000-00000000fed84fff: RESERVED
|
|
12. 00000000fed90000-00000000fed91fff: RESERVED
|
|
13. 0000000100000000-0000000479dfffff: RAM
|
|
CBFS: 'Master Header Locator' located CBFS at [510200:c00000)
|
|
Wrote coreboot table at: 7f768000, 0x91c bytes, checksum fa30
|
|
coreboot table: 2356 bytes.
|
|
IMD ROOT 0. 7f7ff000 00001000
|
|
IMD SMALL 1. 7f7fe000 00001000
|
|
CONSOLE 2. 7f7de000 00020000
|
|
TIME STAMP 3. 7f7dd000 00000910
|
|
MRC DATA 4. 7f7dc000 00000fe4
|
|
ROMSTG STCK 5. 7f7db000 00001000
|
|
AFTER CAR 6. 7f7d1000 0000a000
|
|
RAMSTAGE 7. 7f781000 00050000
|
|
ACPI GNVS 8. 7f780000 00001000
|
|
SMM BACKUP 9. 7f770000 00010000
|
|
COREBOOT 10. 7f768000 00008000
|
|
ACPI 11. 7f744000 00024000
|
|
TCPA TCGLOG12. 7f734000 00010000
|
|
SMBIOS 13. 7f733000 00000800
|
|
IMD small region:
|
|
IMD ROOT 0. 7f7fec00 00000400
|
|
FMAP 1. 7f7feb20 000000e0
|
|
MEM INFO 2. 7f7fe960 000001b9
|
|
ROMSTAGE 3. 7f7fe940 00000004
|
|
COREBOOTFWD 4. 7f7fe900 00000028
|
|
BS: BS_WRITE_TABLES times (ms): entry 0 run 5 exit 0
|
|
CBFS: 'Master Header Locator' located CBFS at [510200:c00000)
|
|
CBFS: Locating 'fallback/payload'
|
|
CBFS: Found @ offset 5ae80 size 106f3
|
|
Checking segment from ROM address 0xff96b0b8
|
|
Payload being loaded at below 1MiB without region being marked as RAM usable.
|
|
Checking segment from ROM address 0xff96b0d4
|
|
Loading segment from ROM address 0xff96b0b8
|
|
code (compression=1)
|
|
New segment dstaddr 0x000e0d20 memsize 0x1f2e0 srcaddr 0xff96b0f0 filesize 0x106bb
|
|
Loading Segment: addr: 0x000e0d20 memsz: 0x000000000001f2e0 filesz: 0x00000000000106bb
|
|
using LZMA
|
|
Loading segment from ROM address 0xff96b0d4
|
|
Entry Point 0x000fd274
|
|
BS: BS_PAYLOAD_LOAD times (ms): entry 0 run 22 exit 0
|
|
ICH-NM10-PCH: watchdog disabled
|
|
Jumping to boot code at 000fd274(7f768000)
|
|
SeaBIOS (version rel-1.12.1-0-ga5cab58)
|
|
BUILD: gcc: (coreboot toolchain v7385b656c2 2019-10-27) 8.3.0 binutils: (GNU Binutils) 2.32
|
|
Found coreboot cbmem console @ 7f7de000
|
|
Found mainboard LENOVO ThinkPad T440p
|
|
Relocating init from 0x000e2380 to 0x7f6e6580 (size 51680)
|
|
Found CBFS header at 0xff910238
|
|
multiboot: eax=7f7bb0e0, ebx=7f7bb094
|
|
Found 21 PCI devices (max PCI bus is 03)
|
|
Copying SMBIOS entry point from 0x7f733000 to 0x000f67a0
|
|
Copying ACPI RSDP from 0x7f744000 to 0x000f6770
|
|
Using pmtimer, ioport 0x508
|
|
Scan for VGA option rom
|
|
Running option rom at c000:0003
|
|
pmm call arg1=0
|
|
Turning on vga text mode console
|
|
SeaBIOS (version rel-1.12.1-0-ga5cab58)
|
|
XHCI init on dev 00:14.0: regs @ 0xe0620000, 21 ports, 32 slots, 32 byte contexts
|
|
XHCI protocol USB 2.00, 15 ports (offset 1), def 3001
|
|
XHCI protocol USB 3.00, 6 ports (offset 16), def 1000
|
|
XHCI extcap 0xc1 @ 0xe0628040
|
|
XHCI extcap 0xc0 @ 0xe0628070
|
|
XHCI extcap 0x1 @ 0xe062846c
|
|
EHCI init on dev 00:1a.0 (regs=0xe0642020)
|
|
EHCI init on dev 00:1d.0 (regs=0xe0643020)
|
|
AHCI controller at 00:1f.2, iobase 0xe0641000, irq 10
|
|
Found 0 lpt ports
|
|
Found 0 serial ports
|
|
Searching bootorder for: /rom@img/memtest
|
|
Searching bootorder for: /rom@img/nvramcui
|
|
Searching bootorder for: /rom@img/coreinfo
|
|
Searching bootorder for: /pci@i0cf8/*@1f,2/drive@0/disk@0
|
|
AHCI/0: Set transfer mode to UDMA-6
|
|
AHCI/0: registering: "AHCI/0: ADATA SU900 ATA-9 Hard-Disk (476 GiBytes)"
|
|
Searching bootorder for: /pci@i0cf8/*@1f,2/drive@5/disk@0
|
|
AHCI/5: registering: "DVD/CD [AHCI/5: MATSHITADVD-RAM UJ8G2 ATAPI-8 DVD/CD]"
|
|
XHCI no devices found
|
|
Initialized USB HUB (0 ports used)
|
|
Initialized USB HUB (0 ports used)
|
|
PS2 keyboard initialized
|
|
All threads complete.
|
|
Scan for option roms
|
|
|
|
Press ESC for boot menu.
|
|
|
|
Searching bootorder for: HALT
|
|
drive 0x000f6700: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=1000215216
|
|
Space available for UMB: c7000-ed800, f5fc0-f6680
|
|
Returned 180224 bytes of ZoneHigh
|
|
e820 map has 11 items:
|
|
0: 0000000000000000 - 000000000009fc00 = 1 RAM
|
|
1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
|
|
2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
|
|
3: 0000000000100000 - 000000007f71f000 = 1 RAM
|
|
4: 000000007f71f000 - 0000000086200000 = 2 RESERVED
|
|
5: 00000000f0000000 - 00000000f4000000 = 2 RESERVED
|
|
6: 00000000fed10000 - 00000000fed1a000 = 2 RESERVED
|
|
7: 00000000fed40000 - 00000000fed45000 = 2 RESERVED
|
|
8: 00000000fed84000 - 00000000fed85000 = 2 RESERVED
|
|
9: 00000000fed90000 - 00000000fed92000 = 2 RESERVED
|
|
10: 0000000100000000 - 0000000479e00000 = 1 RAM
|
|
enter handle_19:
|
|
NULL
|
|
Booting from DVD/CD...
|
|
Device reports MEDIUM NOT PRESENT
|
|
scsi_is_ready returned -1
|
|
Boot failed: Could not read from CDROM (code 0003)
|
|
enter handle_18:
|
|
NULL
|
|
Booting from Hard Disk...
|
|
Booting from 0000:7c00
|
|
|